www.addonics.comAddonics Technologies Inc.

1918 Junction Avenue, San Jose, CA 95131Phone: 408.573.8580 | Fax: 408.573.8588

INTRODUCTION

Model: HDUS325DX

HDD Duplicator Deluxe

About the 1:1 HDD Duplicator Series

This family of Addonics 1:1 HDD duplicator is an economical and simple to use one to one hard drive duplicator solutions. The basic model copies from any 3.5" SATA hard drive to another 3.5" SATA hard drive and the Deluxe model can copy from a 3.5" or 2.5" SATA hard drive to another 3.5" or 2.5" SATA hard drive. There is no computer needed or complex software to operate. Just open the doors on the two drive bays, load your master hard drive to the drive bay on top and another hard drive of capacity equal or larger than the master drive to the bottom drive bay, lock the drive door and push the start button to start the copying process.

Besides the duplicating function, this Addonics duplicator is also a convenient drive sanitization tool to wipe clean any sensitive data stored on any hard drive. You can sanitize both source and target drives all at one time using the SECURE ERASE or the OVERWRITE function up to 7 passes to meet the DoD standard.

About This Model

The HDUS325DX is a 1:1 HDD or SSD duplicator with integrated Snap-In Mobile Rack allowing hard drives to be easily added or removed from the system just like an ordinary cassette tape. Supports SATA 3.5" and 2.5" HDD or SSD.

From Source To Target HDUS325DX 3.5” SATA HDD 3.5”SATA HDD Yes 3.5” SATA HDD 2.5” SATA HDD/SSD Yes 2.5” SATA HDD/SSD 3.5 SATA HDD Yes 2.5” SATA HDD/SSD 2.5”SATA HDD/SSD Yes

Supported drive copying options

www.addonics.comAddonics Technologies Inc.

1918 Junction Avenue, San Jose, CA 95131Phone: 408.573.8580 | Fax: 408.573.8588

Model: HDUS325DX

SPECIFICATIONS

HDD Duplicator Deluxe

• Copy any 3.5" or 2.5" SATA hard drive to any 3.5" or 2.5" SATA hard drive• Great for cloning another hard drive or for making a back up hard drive.• Drives are added or removed from the duplicator just like VHS cassette without any special tool• Support any type of file format• Typical transfer rate* ~ 85 MB/sec• Maximum drive size > 3TB• Source and Destination drives are added or removed like tape cartridges from each drive bay with no special tool required.• Completely standalone One to One hard drive duplicator with no additional hardware or software required• Drive sanitization: • SECURE ERASE - HDD duplicator sends a WIPE command to the hard drive. This command fills 00 string to entire HDD • OVERWRITE - One pass, 3 passes and 7 passes 5220.22-M. The duplicator writes a string of pattern over the entire disk one time, three times or seven times.5220.22-M is the DoD standard for drive sanitization• LCM control module provides a rich set of robust advanced configuration options. Click to see full LCD console feature list * The speed here is for reference only. The speed were measured basing on using 3.5" SATA III 250 GB hard drive for both source and target. The transfer rate varies depending on the speed of the source and destination drive

FEATURES

• Writing mode : Sector to Sector• Typical transfer rate ~ 85 MB/sec• Sturdy metal frame construction• Snap-In Mobile Rack in two bottom drive bays• LCD display with functional control panel• Well ventilated for efficient air flow.• Low noise high CFM ball bearing cooling fan• Integrated 80W 110/240 auto-sense power supply• Compact size (W x D x H) - 7.48 x 10.63 x 6.5 in. (190 x 270 x 16.5 mm) • Weight: ~ 8lb• Operating environment: 0 - 50 degree C, 15% - 90% RH• Storage environment: (- 20) - (65) degree C, 0% - 95% RH non-condensing