hdcsd9
TRANSCRIPT
![Page 1: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/1.jpg)
© 2008 Matsushita Electric Industrial Co., Ltd. Allrights reserved. Unauthorized copying and distribu-tion is a violation of law.
ORDER NO. VM0802009CEB27
High Definition Video CameraModel No.HDC-SD9P HDC-SD9PC HDC-SD9PL HDC-SD9E HDC-SD9EB HDC-SD9EE HDC-SD9EF HDC-SD9EG HDC-SD9EP HDC-SD9GC HDC-SD9GK HDC-SD9GN HDC-SD9SG HDC-SD9DE HDC-SD9DEB HDC-SD9DEGVol. 1Colour(S)...........Silver Type(Except HDC-SD9EF, HDC-SD9DE/EB/EG)(K)...........Black Type(Only HDC-SD9EG/EF, HDC-SD9DE/EB/EG)
![Page 2: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/2.jpg)
2
4TABLE OF CONTENTSPAGE PAGE
1 Safety Precaution -------------------------------------------------31.1. General Guidelines ----------------------------------------31.2. Leakage Current Cold Check ---------------------------31.3. Leakage Current Hot Check (See Figure 1.)--------31.4. How to Discharge the Capacitor on Flash
PCB------------------------------------------------------------42 Warning --------------------------------------------------------------5
2.1. Prevention of Electrostatic Discharge (ESD)to Electrostatically Sensitive (ES) Devices ----------5
2.2. How to Recycle the Lithium Ion Battery (U.S.Only)-----------------------------------------------------------5
2.3. Caution for AC Cord(For EG/GC/SG)-----------------62.4. How to Replace the Lithium Battery-------------------7
3 Service Navigation------------------------------------------------83.1. Introduction --------------------------------------------------83.2. General Description About Lead Free Solder
(PbF) ----------------------------------------------------------83.3. Important Notice 1:(Other than U.S.A. and
Canadian Market) ------------------------------------------83.4. How to Define the Model Suffix (NTSC or PAL
model)---------------------------------------------------------94 Specifications ---------------------------------------------------- 105 Location of Controls and Components------------------ 126 Service Mode ----------------------------------------------------- 16
6.1. Lock Search History Indication ----------------------- 177 Service Fixture & Tools --------------------------------------- 18
7.1. When Replacing the Main PCB ---------------------- 187.2. Service Position ------------------------------------------ 18
8 Disassembly and Assembly Instructions --------------- 208.1. Disassembly Flow Chart-------------------------------- 208.2. PCB Location---------------------------------------------- 208.3. Disassembly Procedure -------------------------------- 21
9 Measurements and Adjustments -------------------------- 369.1. Electric Adjustment -------------------------------------- 36
10 Factory Setting--------------------------------------------------- 3810.1. HOW TO TURN ON THE FACTORY
SETTINGS? ----------------------------------------------- 3810.2. WHAT IS THE FACTORY SETTINGS? ------------ 38
![Page 3: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/3.jpg)
3
1 Safety Precaution1.1. General Guidelines
1. IMPORTANT SAFETY NOTICEThere are special components used in this equipmentwhich are important for safety. These parts are marked by
in the Schematic Diagrams, Circuit Board Layout,Exploded Views and Replacement Parts List. It is essen-tial that these critical parts should be replaced with manu-facturer’s specified parts to prevent X-RADIATION,shock, fire, or other hazards. Do not modify the originaldesign without permission of manufacturer.
2. An Isolation Transformer should always be used duringthe servicing of AC Adaptor whose chassis is not isolatedfrom the AC power line. Use a transformer of adequatepower rating as this protects the technician from acci-dents resulting in personal injury from electrical shocks. Itwill also protect AC Adaptor from being damaged by acci-dental shorting that may occur during servicing.
3. When servicing, observe the original lead dress. If a shortcircuit is found, replace all parts which have been over-heated or damaged by the short circuit.
4. After servicing, see to it that all the protective devicessuch as insulation barriers, insulation papers shields areproperly installed.
5. After servicing, make the following leakage currentchecks to prevent the customer from being exposed toshock hazards.
1.2. Leakage Current Cold Check1. Unplug the AC cord and connect a jumper between the
two prongs on the plug.2. Measure the resistance value, with an ohmmeter,
between the jumpered AC plug and each exposed metal-lic cabinet part on the equipment such as screwheads,connectors, control shafts, etc. When the exposed metal-lic part has a return path to the chassis, the readingshould be between 1 MΩ and 5.2 MΩ. When the exposedmetal does not have a return path to the chassis, thereading must be infinity.
1.3. Leakage Current Hot Check(See Figure 1.)
1. Plug the AC cord directly into the AC outlet. Do not usean isolation transformer for this check.
2. Connect a 1.5 kΩ, 10 W resistor, in parallel with a 0.15 μFcapacitor, between each exposed metallic part on the setand a good earth ground, as shown in Figure 1.
3. Use an AC voltmeter, with 1 kΩ/V or more sensitivity, tomeasure the potential across the resistor.
4. Check each exposed metallic part, and measure the volt-age at each point.
5. Reverse the AC plug in the AC outlet and repeat each ofthe above measurements.
6. The potential at any point should not exceed 0.75 V RMS.A leakage current tester (Simpson Model 229 or equiva-lent) may be used to make the hot checks, leakage cur-rent must not exceed 1/2 mA. In case a measurement isoutside of the limits specified, there is a possibility of ashock hazard, and the equipment should be repaired andrechecked before it is returned to the customer.
Figure. 1
![Page 4: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/4.jpg)
4
1.4. How to Discharge the Capacitor on Flash PCBCAUTION:
1. Be sure to discharge the capacitor on FLASH PCB.2. Be careful of the high voltage circuit on FLASH PCB when servicing.
[Discharging Procedure]1. Refer to the disassemble procedure and Remove the necessary parts/unit.2. Put the insulation tube onto the lead part of Resistor (ERG5SJ102:1kΩ /5W).
(an equivalent type of resistor may be used.)3. Put the resistor between both terminals of capacitor on FLASH PCB for approx. 5 seconds.4. After discharging confirm that the capacitor voltage is lower than 10V using a voltmeter.
Fig. F1
![Page 5: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/5.jpg)
5
2 Warning2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatically
Sensitive (ES) DevicesSome semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Elec-trostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors andsemiconductor "chip" components. The following techniques should be used to help reduce the incidence of component damagecaused by electrostatic discharge (ESD).
1. Immediately before handling any semiconductor component or semiconductor-equipped assembly, drain off any ESD on yourbody by touching a known earth ground. Alternatively, obtain and wear a commercially available discharging ESD wrist strap,which should be removed for potential shock reasons prior to applying power to the unit under test.
2. After removing an electrical assembly equipped with ES devices, place the assembly on a conductive surface such as alumi-num foil, to prevent electrostatic charge buildup or exposure of the assembly.
3. Use only a grounded-tip soldering iron to solder or unsolder ES devices.4. Use only an antistatic solder removal device. Some solder removal devices not classified as "antistatic (ESD protected)" can
generate electrical charge sufficient to damage ES devices.5. Do not use freon-propelled chemicals. These can generate electrical charges sufficient to damage ES devices.6. Do not remove a replacement ES device from its protective package until immediately before you are ready to install it. (Most
replacement ES devices are packaged with leads electrically shorted together by conductive foam, aluminum foil or compara-ble conductive material).
7. Immediately before removing the protective material from the leads of a replacement ES device, touch the protective materialto the chassis or circuit assembly into which the device will be installed.CAUTION :
Be sure no power is applied to the chassis or circuit, and observe all other safety precautions.8. Minimize bodily motions when handling unpackaged replacement ES devices. (Otherwise harmless motion such as the
brushing together of your clothes fabric or the lifting of your foot from a carpeted floor can generate static electricity (ESD) suf-
ficient to damage an ES device).
2.2. How to Recycle the Lithium Ion Battery (U.S. Only)
![Page 6: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/6.jpg)
6
2.3. Caution for AC Cord(For EG/GC/SG)
2.3.1. Information for Your SafetyIMPORTANT
Your attention is drawn to the fact that recording of pre-recorded tapes or discs or other published or broadcastmaterial may infringe copyright laws.
WARNINGTo reduce the risk of fire or shock hazard, do not exposethis equipment to rain or moisture.
CAUTIONTo reduce the risk of fire or shock hazard and annoyinginterference, use the recommended accessories only.
FOR YOUR SAFETY DO NOT REMOVE THE OUTER COVERTo prevent electric shock, do not remove the cover. No userserviceable parts inside. Refer servicing to qualified servicepersonnel.
2.3.2. Caution for AC Mains LeadFor your safety, please read the following text carefully.
This appliance is supplied with a moulded three-pin mains plugfor your safety and convenience.A 5-ampere fuse is fitted in this plug.Should the fuse need to be replaced please ensure that thereplacement fuse has a rating of 5 amperes and it is approvedby ASTA or BSI to BS1362Check for the ASRA mark or the BSI mark on the body of thefuse.
If the plug contains a removable fuse cover you must ensurethat it is refitted when the fuse is replaced.If you lose the fuse cover, the plug must not be used until areplacement cover is obtained.A replacement fuse cover can be purchased from your localPanasonic Dealer.
If the fitted moulded plug is unsuitable for the socket outlet inyour home then the fuse should be removed and the plug cutoff and disposed of safety.There is a danger of severe electrical shock if the cut off plug isinserted into any 13-ampere socket.
If a new plug is to be fitted please observe the wiring code asshown below.If in any doubt, please consult a qualified electrician.
2.3.2.1. ImportantThe wires in this mains lead are coloured in accordance withthe following code:
As the colours of the wires in the mains lead of this appliancemay not correspond with the coloured markings identifying theterminals in your plug, proceed as follows:
The wire which is coloured BLUE must be connected to the ter-minal in the plug which is marked with the letter N or colouredBLACK.
The wire which is coloured BROWN must be connected to theterminal in the plug which is marked with the letter L or colouredRED.
Under no circumstances should either of these wires be con-nected to the earth terminal of the three pin plug, marked withthe letter E or the Earth Symbol.
2.3.2.2. Before UseRemove the Connector Cover as follows.
2.3.2.3. How to Replace the Fuse1. Remove the Fuse Cover with a screwdriver.
2. Replace the fuse and attach the Fuse cover.
Blue NeutralBrown Live
![Page 7: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/7.jpg)
7
2.4. How to Replace the Lithium Battery2.4.1. Replacement Procedure
1. Remove the FLASH PCB. (Refer to Disassembly Procedures.)2. Remove the Lithium battery (Ref. No. “B6401” at foil side of FLASH PCB) and then replace it into new one.
NOTE:This Lithium battery is a critical component. (Type No.: ML-614S/ZT Manufactured by Matsushita Battery Industrial Co.,Ltd.)It must never be subjected to excessive heat or discharge.It must therefore only be fitted in requirement designed specifically for its use.Replacement batteries must be of same type and manufacture.They must be fitted in the same manner and location as the original battery, with the correct polarity contacts observed.Do not attempt to re-charge the old battery or re-use it for any other purpose.It should be disposed of in waste products destined for burial rather than incineration.
NOTE:Above caution is applicable for a battery pack which is for HDC-SD9/SD9D series, as well.1. Battery Pack for this model.2. Button-type battery for Remote controller (CR2025: Being supplied from MBI)
NOTE:“MBI” stans for Matsushita Battery Industrial Co., Ltd.
![Page 8: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/8.jpg)
8
3 Service Navigation3.1. IntroductionThis service manual contains technical information, which allow service personnel’s to understand and service this model.Please place orders using the parts list and not the drawing reference numbers.If the circuit is changed or modified, the information will be followed by service manual to be controlled with original service manual.
3.2. General Description About Lead Free Solder (PbF)The lead free solder has been used in the mounting process of all electrical components on the printed circuit boards used for thisequipment in considering the globally environmental conservation.The normal solder is the alloy of tin (Sn) and lead (Pb). On the other hand, the lead free solder is the alloy mainly consists of tin(Sn), silver (Ag) and Copper (Cu), and the melting point of the lead free solder is higher approx.30°C (86°F) more than that of thenormal solder.Distinction of PCB Lead Free Solder being used
Service caution for repair work using Lead Free Solder (PbF)• The lead free solder has to be used when repairing the equipment for which the lead free solder is used.
(Definition: The letter of “PbF” is printed on the PCB using the lead free solder.)• To put lead free solder, it should be well molten and mixed with the original lead free solder.• Remove the remaining lead free solder on the PCB cleanly for soldering of the new IC.• Since the melting point of the lead free solder is higher than that of the normal lead solder, it takes the longer time to melt the
lead free solder.• Use the soldering iron (more than 70W) equipped with the temperature control after setting the temperature at 350±30°C
(662±86°F).Recommended Lead Free Solder (Service Parts Route.)
• The following 3 types of lead free solder are available through the service parts route.RFKZ03D01K-----------(0.3mm 100g Reel)RFKZ06D01K-----------(0.6mm 100g Reel)RFKZ10D01K-----------(1.0mm 100g Reel)
Note* Ingredient: tin (Sn) 96.5%, silver (Ag) 3.0%, Copper (Cu) 0.5%, Cobalt (Co) / Germanium (Ge) 0.1 to 0.3%
3.3. Important Notice 1:(Other than U.S.A. and Canadian Market)1. The service manual does not contain the following information, because of the impossibility of servicing at component level
without concerned equipment/facilites.a. Schematic diagram, Block Diagram and PCB layout of MAIN PCB.b. Parts list for individual parts for MAIN PCB.
When a part replacement is required for repairing MAIN PCB, replace as an assembled parts. (Main PCB)2. The following category is /are recycle module part. Please send it/them to Central Repair Center.
• MAIN PCB (VEP03H43H-1 : HDC-SD9P/PC)• MAIN PCB (VEP03H43T-1 : HDC-SD9PL)- MAIN PCB (VEP03H43J-1 : HDC-SD9E/EF/EG, SD9DE)• MAIN PCB (VEP03H43V-1 : HDC-SD9EB, SD9DEB)• MAIN PCB (VEP03H43L-1 : HDC-SD9EE)• MAIN PCB (VEP03H43S-1 : HDC-SD9EP, SD9DEG)• MAIN PCB (VEP03H43K-1 : HDC-SD9GC/SG)• MAIN PCB (VEP03H43U-1 : HDC-SD9GN)- MAIN PCB (VEP03H43M-1 : HDC-SD9GK)
![Page 9: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/9.jpg)
9
3.4. How to Define the Model Suffix (NTSC or PAL model)There are six kinds of HDC-SD9/SD9D.
• a) HDC-SD9S• b) HDC-SD9P• c) HDC-SD9PC• d) HDC-SD9E/EB/EF/EG/EP/GC/GN/SG, SD9DE/EB/EG• e) HDC-SD9EE• c) HDC-SD9PL/GK
(HDC-SD9S is exclusively Japan domestic model.)What is the difference is that the “INITIAL SETTING” data which is stored in Flash ROM mounted on Main PCB.
3.4.1. Defining methods:To define the model suffix to be serviced, refer to the rating label which is putted on the bottom side of the Unit.
NOTE:After replacing the MAIN PCB, be sure to achieve adjustment.The adjustment instruction is available at “software download” on the “Support Information from NWBG/VDBG-PAVC” web-sitein “TSN system”, together with Maintenance software.
![Page 10: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/10.jpg)
10
4 Specifications
![Page 11: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/11.jpg)
11
![Page 12: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/12.jpg)
12
5 Location of Controls and Components
![Page 13: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/13.jpg)
13
![Page 14: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/14.jpg)
14
![Page 15: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/15.jpg)
15
![Page 16: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/16.jpg)
16
6 Service Mode1. Indication method of the service menu
Set the mode switch “Recording” mode.2. While keep pressing the “[LEFT<] of cursor” button and “delete” button, hold down the Mode Select Switch towards to
“[FOCUS]” position for more than 3 seconds until the top screen of the Service Menu being displayed.
Service mode menu
NOTE:Do not using service mode except above table of Service Menu.
3. End method of the top screen of the service menuPush the menu button to end the service mode, and then POWER OFF.
Screen display Contents Function1 Factory settings Function to throw a product up in a factory shipment state4 Lock search history indication Display an error cord for three histories saved in EEPROM
![Page 17: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/17.jpg)
17
6.1. Lock Search History Indication1. Set the mode switch “Recording” mode.2. While keep pressing the “[LEFT<] of cursor” button and “delete” button, hold down the Mode Select Switch towards to
“[FOCUS]” position for more than 3 seconds until the top screen of the Service Menu being displayed.3. Select [ 4 ] Lock search history indication.
Operation specifications
Indication contents• Lock search history indication
Display the camera system error cord for three histories saved in EEPROM.• The error cord contents which are displayed
Lock search history indication is finished by POWER OFF.
Error code Function51 Focus control is abnormal52 Zoom control is abnormal53 OIS lens control is abnormal71 Lens cover open/close is abnormal72 Cooling fan is abnormal73 High temperature is abnormal33 Communication between camera to ARM is abnormal
![Page 18: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/18.jpg)
18
7 Service Fixture & Tools7.1. When Replacing the Main PCBAfter replacing the MAIN PCB, be sure to achieve adjustment.The adjustment instruction is available at “software download” on the “Support Information from NWBG/VDBG-PAVC” web-site in“TSN system”, together with Maintenance software.
7.2. Service PositionThis Service Position is used for checking and replacing parts. Use the following Extension cables for servicing.
Table S1 Extension Cable List
No. Parts No. Connection Form1 RFKZ0446 PS6003 (MAIN) - CCD FPC 50PIN 0.4 B to B2 RFKZ0448 FP6002 (MAIN) - LENS UNIT 33PIN 0.3 FFC3 RFKZ0343 PP6002 (MAIN) - PP6401 (FLASH) 30PIN 0.5 B to B4 RFKZ0446 FP6001 (MAIN) - FP6502 (SIDE(R)) 29PIN 0.3 FFC5 VFK2020 PS6101 (SUB) - POWER FPC 20PIN 0.5 B to B6 VFK1175 FP6402 (MAIN) - REAR CASE FPC 16PIN 0.5 FFC
![Page 19: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/19.jpg)
19
CAUTION-1. (When servicing FLASH PCB)1. Be sure to discharge the capacitor on FLASH PCB.
Refer to “HOW TO DISCHARGE THE CAPACITOR ON FLASH PCB”.The capacitor voltage is not lowered soon even if the AC Cord is unplugged or the battery is removed.
2. Be careful of the high voltage circuit on FLASH PCB.3. DO NOT allow other parts to touch the high voltage circuit on FLASH PCB.
![Page 20: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/20.jpg)
20
8 Disassembly and Assembly Instructions8.1. Disassembly Flow Chart
8.2. PCB Location
![Page 21: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/21.jpg)
21
8.3. Disassembly Procedure
No. Item Fig Removal1 Lens Hood Fig. D1 Lens Hood2 Side Case (R) Unit Fig. D2 1 Screw (A)
3 Screws (B)4 Screws (C)2 Screws (D)R Cover
Fig. D3 FP6502 (Flex)Side Case (R) Unit
3 Side Case (L) Unit Fig. D4 3 Screws (E)2 Screws (F)
Fig. D5 1 Screw (G)2 Screws (H)1 Screw (I)Side Case (L) Unit
4 Front Case Unit Fig. D6 3 Screws (J)Sensor Window Unit
Fig. D7 FP6003 (Flex)Front Case Unit
5 Top Case Unit Fig. D8 FP6401 (Flex)P6401 (Connector)FP6402 (Flex)2 Screws (K)1 Screw (L)3 Locking tabsTop Case Unit
6 Battery Case Unit Fig. D9 PS6001 (Flex)1 Screw (M)1 Screw (N)Battery Case Unit
7 Lens Unit Fig. D10 PS6003 (Flex)FP6002 (Flex)1 Screw (O)Lens Unit
8 Lens Plate Unit Fig. D11 PP6002 (Connector)1 Screw (P)Lens Plate Unit
9 Main P.C.B. Fig. D12 1 Screw (Q)2 Locking tabsPS6004 (Flex)Earth PlateMain P.C.B.
10 Sub P.C.B. Fig. D13 4 Screws (R)Main FrameBottom FrameMain/Sub FlexSub P.C.B.
11 Flash P.C.B. Fig. D14 1 Screw (S)Lens Plate
Fig. D15 Solder (3 points)2 Locking tabsCapacitor Cover UnitFlash P.C.B.
12 Side (R) P.C.B. Fig. D16 2 Screws (T)5 Screws (U)FP601 (Flex)Side (R) P.C.B.
13 LCD Unit Fig. D17 Hinge Plate2 RibsOperation knobSR SW knobFlexLCD Unit
14 Monitor P.C.B. Fig. D18 2 Screws (V)6 Locking tabs
Fig. D19 FP901 (Flex)LCD Hinge UnitLCD Earth PlateFP902 (Flex)3 Locking tabsMonitor P.C.B.
15 LCD Fig. D20 Reflection SheetLight PanelDiffusion SheetPrism Sheet BPrism Sheet ALens HolderLCD Shield SheetLCD Bottom CaseLCD
16 Barrier Motor Unit Fig. D21 3 Screws (W)Earth PlateBarrier Select knobFront CoverCushionBarrier Motor Unit
17 Battery Spring,Battery knob
Fig. D22 2 Screws (X)CCD Shield Case1 Screw (Y)Battery Release HolderBattery SpringBattery knob
18 Power FPC Fig. D23 1 Screw (Z)Rear Frame2 Locking tabsPower FPC
19 SD Card Unit Fig. D24 1 Screw (a)2 Locking tabsBattery CaseSD Card Unit
20 Mic P.C.B. Fig. D25 Mic FPC1 Screw (b)FP4801 (Flex)Mic P.C.B.
21 Mic Fig. D26 1 Screw (c)Mic Angle3 Locking tabsSheetMic NetMic
22 Rear Operation Unit Fig. D27 1 Screw (d)Rear Operation Unit
23 Speaker Fig. D28 1 Screw (e)Fig. D29 Tape
Top FrameSpeaker
24 Prism Unit,Optical Filter
Fig. D30 1 Screw (h)2 Screws (i)CCD Heatsink PlatePrism UnitOptical Filter
25 IRIS Unit Fig. D31 4 Screws (j)Solder (20 points)3 Ribs
Fig. D32 IRIS Unit26 Zoom Motor Unit Fig. D33 2 Screws (k)
Zoom Motor Unit
No. Item Fig Removal
![Page 22: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/22.jpg)
22
8.3.1. Removal of the Lens Hood
Fig. D1
27 Focus Motor Unit Fig. D34 2 Screws (l)Focus Motor Unit
28 Master Frange Unit,4th Lens Frame Move Unit
Fig. D35 3 Screws (m)4th Lens Frame Move UnitMaster Frange
Fig. D36 NOTE (When Installing)29 OIS Unit Fig. D37 OIS Unit30 2nd Lens Frame Move
Unit,Guide Pole
Fig. D38 2nd Lens Frame Move Unit2 Guide Poles
No. Item Fig Removal
![Page 23: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/23.jpg)
23
8.3.2. Removal of the Side Case (R) Unit
Fig. D2
Fig. D3
8.3.3. Removal of the Side Case (L) Unit
Fig. D4
![Page 24: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/24.jpg)
24
Fig. D5
8.3.4. Removal of the Front Case Unit
Fig. D6
Fig. D7
8.3.5. Removal of the Top Case Unit
Fig. D8
![Page 25: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/25.jpg)
25
8.3.6. Removal of the Battery Case Unit
Fig. D9
8.3.7. Removal of the Lens Unit
Fig. D10
8.3.8. Removal of the Lens Plate Unit
Fig. D11
8.3.9. Removal of the Main P.C.B.
Fig. D12
![Page 26: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/26.jpg)
26
8.3.10. Removal of the Sub P.C.B.
Fig. D13
8.3.11. Removal of the Flash P.C.B.
Fig. D14
![Page 27: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/27.jpg)
27
Fig. D15
8.3.12. Removal of the Side (R) P.C.B.
Fig. D16
![Page 28: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/28.jpg)
28
8.3.13. Removal of the LCD Unit
Fig. D17
8.3.14. Removal of the Monitor P.C.B.
Fig. D18
Fig. D19
![Page 29: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/29.jpg)
29
8.3.15. Removal of the LCD
Fig. D20
8.3.16. Removal of the Barrier Motor Unit
Fig. D21
![Page 30: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/30.jpg)
30
8.3.17. Removal of the Battery Spring andBattery knob
Fig. D22
8.3.18. Removal of the Power FPC
Fig. D23
![Page 31: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/31.jpg)
31
8.3.19. Removal of the SD Card unit
Fig. D24
8.3.20. Removal of the Mic P.C.B.
Fig. D25
8.3.21. Removal of the Mic
Fig. D26
![Page 32: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/32.jpg)
32
8.3.22. Removal of the Rear Operation Unit
Fig. D27
8.3.23. Removal of the Speaker
Fig. D28
Fig. D29
![Page 33: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/33.jpg)
33
8.3.24. Removal of the Prism Unit andOptical Filter
Fig. D30
8.3.25. Removal of the IRIS Unit
Fig. D31
Fig. D32
8.3.26. Removal of the Zoom Motor Unit
Fig. D33
![Page 34: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/34.jpg)
34
8.3.27. Removal of the Focus Motor Unit
Fig. D34
8.3.28. Removal of the Master Frange Unitand 4th Lens Frame Move Unit
Fig. D35
Fig. D36
8.3.29. Removal of the OIS Unit
Fig. D37
![Page 35: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/35.jpg)
35
8.3.30. Removal of the 2nd Lens FrameMove Unit and Guide Pole
Fig. D38
![Page 36: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/36.jpg)
36
9 Measurements and Adjustments9.1. Electric Adjustment
• Adjustment method is different from a conventional SD video camera.• An exclusive jig and PC (including software for adjustment “Tatsujin”) are necessary for electric adjustment.• A USB driver for service is necessary to communication with PC.• Connection method of the main unit and an exclusive adjustment jig as follows
9.1.1. Adjustment Procedure• Connect the main unit to PC with USB.
The adjustment instruction is available at "Software download" on the "Support Information from NWBG/VDBG-PAVC" web-sitein "TSN System".
Figure of connection
Figure of image when adjustment
Part Number of jig• Only a necessary jig mentions it in setup of electric adjustment.
No. Part Name Part Number Remarks1 PC ------2 AC Adaptor ------3 DC Cable ------4 USB Cable ------5 37mm Step Up Ling VFK1164TAR376 Adjustment Software (Tatsujin) ------
![Page 37: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/37.jpg)
37
Adjustment Items• Adjustment item as follows.
The adjustment instruction is available at "Software download" on the "Support Information from NWBG/VDBG-PAVC" web-sitein "TSN System".
![Page 38: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/38.jpg)
38
10 Factory Setting10.1. HOW TO TURN ON THE FACTORY SETTINGS?
1. Set the mode switch “Recording” mode.2. While keep pressing the “[LEFT<] of cursor” button and “delete” button, hold down the Mode Select Switch towards to
“[FOCUS]” position for more than 3 seconds until the top screen of the Service Menu being displayed.
3. Under the condition of the Item No.”1” is yellow high lighted, press the “[RIGHT>] of cursor“ button.4. By pressing the “[UP ^] of cursor” button, then press the “[center] of cursor” button.5. After few seconds “END” is displayed on LCD monitor. Cutting of battery connection or AC power supply connection as a
completion of the “FACTORY SETTINGS”.
10.2. WHAT IS THE FACTORY SETTINGS?The factory settings clean up and/or refresh the following settings.
1. The OSD MENU setting data.2. Deletion only for all scene files in a card and format of the MPEG2 file system area.3. Reset the folder number and file number of still pictures.
(Setting the folder number is 100, and file number is 0.)4. Clear the mechanism lock information.5. Clear the service mode information contents.
The setting position of factory settings:
Name Setting positionMode select switch AUTOMode switch OFF
![Page 39: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/39.jpg)
S-1
S1. About Indication of The Schematic Diagram ............................ S-1S1.1. Important Safety Notice......................................................... S-1
S2. Voltage Chart ........................................................................... S-2S2.1. Flash P.C.B. .......................................................................... S-2S2.2. Side R P.C.B. ........................................................................ S-2S2.3. Mic P.C.B. .............................................................................. S-2S2.4. Monitor P.C.B. ....................................................................... S-2
S3. Block Diagram .......................................................................... S-3S3.1. Overall Block Diagram .......................................................... S-3
S4. Schematic Diagram .................................................................. S-4S4.1. Interconnection Diagram ....................................................... S-4S4.2. Flash Schematic Diagram ..................................................... S-5S4.3. Side R Schematic Diagram ................................................... S-6S4.4. LCD Schematic Diagram....................................................... S-7S4.5. Mic Schematic Diagram ........................................................ S-8S4.6. Monitor Schematic Diagram .................................................. S-9S4.7. CCD FPC Schematic Diagram ............................................ S-10
S5. Print Circuit Board .................................................................. S-11S5.1. Flash P.C.B. ........................................................................ S-11S5.2. Side R P.C.B. ...................................................................... S-12S5.3. Mic P.C.B. ............................................................................ S-13S5.4. Monitor P.C.B. ..................................................................... S-14S5.4.1. Monitor P.C.B. (Component Side) .................................... S-14S5.4.2. Monitor P.C.B. (Foil Side) ................................................. S-15S5.5. CCD FPC P.C.B. ................................................................. S-16S5.5.1. CCD FPC P.C.B. (Component Side) ................................ S-16S5.5.2. CCD FPC P.C.B. (Foil Side) ............................................. S-17
S6. Replacement Parts List .......................................................... S-19
S7. Exploded View ....................................................................... S-26S7.1. Frame and Casing Section (1) ............................................ S-26S7.2. Frame and Casing Section (2) ............................................ S-27S7.3. LCD Section ........................................................................ S-28S7.4. Camera Lens Section.......................................................... S-29S7.5. Packing Parts and Accessories Section .............................. S-30
Table of contents
Service ManualVM0802009CE
Diagrams and ReplacementParts List
Vol. 1
(S)...........Silver Type (except EF/DE/EB/EG)(K)...........Black Type (only EG/EF/DE/EB/EG)
Colour
Model No.HDC-SD9PHDC-SD9PCHDC-SD9PLHDC-SD9EHDC-SD9EBHDC-SD9EEHDC-SD9EF
HDC-SD9EGHDC-SD9EPHDC-SD9GCHDC-SD9GKHDC-SD9GNHDC-SD9SGHDC-SD9DE
HDC-SD9DEBHDC-SD9DEG
High Definition Video Camera
Name of Signal
OFTR FEP This signal is connectedto the FEP schematic diagram.
Circuit name being connected.
6.Use the parts number indicated on the Replacement Parts List .
7.Indication on Schematic diagrams:
5.The voltage being indicated here may be include observational-error (deviation) due tointernal-resistance and/or reactance of equipment. Therefore, handle the valueindicated on here as reference.
4.Although the voltage and waveform available on here is measured with standard frame,it may be differ from actual measurement due to modification of circuit and so on.
3.The voltage being indicated on the schematic diagram is measured in"Standard-Playback" mode when there is no specify mode is mentioned.
2.It is only the "Test Round" and no terminal (Pin) is available on the P.C.B.when the TP (Test Point) indicated as " " mark.
1.Although reference number of the parts is indicated on the P.C.B. drawing and/orschematic diagrams, it is NOT mounted on the P.C.B. when it is displayed with "$" mark.
FOR SAFETY. WHEN REPLACING ANY OF THESE COMPONENTS USE ONLY THE SAME TYPE.COMPONENTS IDENTIFIED WITH THE MARK HAVE THE SPECIAL CHARACTERISTICS
S1. About Indication of The Schematic DiagramS1.1. Important Safety Notice
![Page 40: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/40.jpg)
S-2
S2. Voltage Chart
S2.1. Flash P.C.B.
Note) Indicated voltage values are the standard values for the unit measured by the DC electronic circuit tester (high-impedance) with the chassis taken as standard. Therefore, there may exist some errors in the voltage values, depending on the internal impedance of the DC circuit tester.
REF No. PIN No. POWER ONQ7001 E 0Q7001 C 0Q7001 B 1Q7002 E 0Q7002 C 1Q7002 B 0Q7003 E 0Q7003 C 2.6Q7003 B 0.8
QR6402 E 3.8QR6402 C 3.6QR6402 B 0QR6403 E 3.8QR6403 C 0QR6403 B 4.1QR7001 E 0QR7001 C 2.3QR7001 B 0QR7008 E 0QR7008 C 1QR7008 B 0
S2.2. Side R P.C.B.
REF No. PIN No. POWER ONIC601 1 1.8IC601 2 0IC601 3 2.5IC601 4 2.7IC601 5 0IC601 6 0IC601 7 1.4IC601 8 2.7IC601 9 3IC601 10 0.2IC601 11 0.1IC601 12 3.2IC601 13 3.5IC601 14 3.2IC601 15 0IC601 16 0IC601 17 1.4IC601 18 1.3IC601 19 3.2IC601 20 3.2IC601 21 3.1IC601 22 0IC601 23 0IC601 24 6IC601 25 0IC601 26 0IC601 27 3.3IC601 28 3.3IC601 29 3.3IC601 30 3.3IC601 31 6IC601 32 6.6IC601 33 6IC601 34 0.3IC601 35 5.6IC601 36 6.3IC601 37 0IC601 38 2.7IC601 39 3.5IC601 40 3.5IC601 41 6.7IC601 42 2IC601 43 1.4IC601 44 1IC601 45 0.9IC601 46 0.8IC601 47 0.3IC601 48 0IC601 49 0.2IC601 50 0.2IC601 51 0.2IC601 52 0IC601 53 0IC601 54 0.2IC601 55 0IC601 56 2.7IC601 57 2.6IC601 58 0IC601 59 0IC601 60 0IC601 61 3.2IC601 62 0IC601 63 0IC601 64 1.2IC604 1 6IC604 2 0
REF No. PIN No. POWER ONIC604 3 0IC604 4 3.3IC604 5 6
S2.3. Mic P.C.B.
REF No. PIN No. POWER ONIC4801 1 3.3IC4801 2 3.3IC4801 3 2.8IC4801 4 0IC4801 5 2.8IC4801 6 3.3IC4801 7 2.9IC4801 8 6.5IC4803 1 2.8IC4803 2 2.8IC4803 3 2.8IC4803 4 0IC4803 5 2.8IC4803 6 2.6IC4803 7 2.6IC4803 8 6.5Q4801 E 5.7Q4801 C 6.5Q4801 B 6.5
S2.4. Monitor P.C.B.
REF No. PIN No. POWER ONQ901 E 0.9Q901 C 2.3Q901 B 1.9Q902 E 0.9Q902 C 2.3Q902 B 1.9Q903 E 0.9Q903 C 2.3Q903 B 1.9Q905 E 0Q905 C -6.2Q905 B 0Q910 E 1.9Q910 C 0Q910 B 1
![Page 41: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/41.jpg)
S-3
S3. Block DiagramS3.1. Overall Block Diagram
HDC-SD9 OVERALL BLOCK DIAGRAM
IC2006SYSTEM CONTROL(CAMERA MICROCOMPUTER)
ZOOM/FOCUSMOTOR
IRIS/OIS
LENS(F1.8 x 10)
3CCD
IC104 106CDS/PGA &10bit ADC
IC703LENS DRIVE
IC101CG/SSG
IC107VERTICALDRIVER
X306OSC
IC301CAMERA DSP(RATIS)
IC6101,6401GYRO SENSOR
IC1001POWER CIRCUIT
IC2304RTC
IC2007EEPROM
IC3401SDRAM/512Mbit
SDCARD
USB TERMINAL
IC3701AVIO
SPEAKER
IC4801-4803MIC AMP
MIC
A/V OUT
OPERATION
DC JACK
BATTERY
X2001(13.5MHz)
FLASHSCOPE LAMP
Q7001 7005,QR7001,7008FLASH DRIVE
IC3400VIDEO(UNIPHIERXP)
IC3601VIDEOENCODER
IC601LCDDRIVER
EVF
COLOR LCDPANEL
IC3800HDMILSI
HDMITERMINAL
D TERMINAL
REMOTESENSOR
IC3402SDRAM/512Mbit
IC3403NANDFLASH/ROM512Mbit
SH
UT
TE
R
IC401ELVIS
X2301(32.768KHz)
(Japan/P/PC/PL: 83.1MHz)(Other areas : 67.5MHz)
![Page 42: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/42.jpg)
S-4
S4. Schematic DiagramS4.1. Interconnection Diagram
MAIN P.C.B.(COMPONENT SIDE)
HDC-SD9 INTERCONNECTION DIAGRAM
PS6002
TRACEPKT7
TRACEPKT6
TRACEPKT5
AFST
GND
BUS8TRST
BUS8TDI
BUS8TMS
CLK16
TCK
BUS8EXTRG0
BUS15
TD0
MVD
GLVD
GND
SAMMPRXD
30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
MIC
REAR OPERATIONUNIT
LENSBARRIER
FP901
12
3 56
784
9 1110
131412
1516
1718
1920
2122
23
CLK3MCKH2
CLK3MCKH1
PWLCD8R5V
MCSH
GMG
GMR
GMB
MCOM
PWMBL5V
MSEL
DGND
DGND
MSTH
MDSG
DSD
MCSV
MENB
MSTV
MCKV
BLCONT
PWMBL5V
DGND
DGND
SEL
GND
CKV
STV
VVDD
ENB
CSV
VBB
COM
DSD
DSGB R G
CSH
VSS
STH
HVDD
CKH1
CKH2
20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
FP902
MONITOR P.C.B.(FOIL SIDE)
LCD UNIT
UARTO
UARTI
PWREG5V
CAMRST
OCDSDA
OCDSCL
TRACECLK
TRACESYNC
TRACEPKT0
TRACEPKT1
TRACEPKT2
TRACEPKT3
TRACEPKT4
SAMPTXD
GARMRST
PP6002
PWLIBATT
GGYROY
GGYROREFY
ZOOMAD
DISKLED
POWERLEDB
STANDBYLEDB
KEYIN3
KEYIN1
POWERSW
DGND
DGND
PWREG3V
STNOREG
STNOREG
16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
SPOUT2
SPOUT2
SPOUT1
SPOUT1
PWREG5V
MICOUTR
MICOUTB
MICOUTC
MICOUTF
MICOUTL
MICGND
MICGND
CHARGE
CHAEND
TRIGEND
PS6003
AGND[RG]
AGND[RG]
RGG
V1G
V2G
V3G
V4G
SUBR
RGR
AGND[RG]
AGND[RG]
PW5VB
PW5VB
H1B
H2B
HLB
SUBB
RGB
V4B
V3B
V2B
V1B
AGND[B]
AGND[B]
GSIGB
25242322212019181716151413121110 9 8 7 6 5 4 3 2 1
GSIGG
AGND[RG]
AGND[RG]
H1G
H2G
HLG
SUBG
H1R
H2R
HLR
AGND[RG]
GSIGR
AGND[RG]
PW12VRG
PW5VRG
PW5VRG
PTPT
PW12VB
V4R
V3R
V2R
V1R
AGND[B]
AGND[B]
26272829303132333435363738394041424344454647484950
FP6001
SYSRST
BUS13
SLLCD0
BUS13
SLLCD2
BUS13
SLLCD4
BUS13
SLLCD6
PWLCD3V
DGND
DGND
DGND
DGND
PWMBL5V
MSEL
PWREG3V
KEYIN4
SYSRST
PWLC5V
BUS13
SLLCD1
BUS13
SLLCD3
BUS13
SLLCD5
BUS13
SLLCD7
CLK27
SLLCD
DGND
DGND
DGND
PWLCD8R5V
PWMBL5V
LCDRVS
KEYIN2
KEYIN5
28 26 24 22 20 18 16 14 12 10 8 6 4 2
29 27 25 23 21 19 17 15 13 11 9 7 5 3 1
FP6002
323028262422201816141210 8 6 4 2
333129272523211917151311 9 7 5 3 1
FLEDCONT
YAWHO-
YAWHO+
PITHIN-
PITHIN+
YAWDRV+
PITDRV-
ZBN
ZBP
ALEDCONT
FENCVCC
IRHIN+
IRHIN-
IRM-
FAN
FAP
FENCVCC
FABS
YAWHIN+
YAWHIN-
PITHO-
PITHO+
YAWDRV-
PITDRV+
ZAP
ZAN
ZABS
IRM+
IRHO+
IRHO-
FBN
FBP
NC
FP6003CL SHTER LEDCP SHTER LED
M GNDSHTER CLOSESHTER OPENMOTER MMOTER MMOTER MMOTER PMOTER P
10987654321
PS6004
PWSTNOREG
PWSTNOREG
PWSTNOREG2
PWSTNOREG2
GGYROP
GGYROREFP
GHDYOUT
GPBOUT
GPROUT
GROUT
GLOUT
GVOUT
PWREG1R8V
PWREG1R8V
PWREG1R8V
PWREG1R8V
PW3R2VDD3
PW3R2VDD3
PW3R2VDD3
PW3R2VDD3
PW3R2VDD3
PWLNI1R2V
PWLNI1R2V
PWLNI1R2V
PWLNI1R2V
PWLNI1R2V
PWLNI1R2V
PWREG1R2V
PWREG1R2V
PWREG1R2V
PWREG1R2V
PWREG5V
PWCAM5V
PWCAM5V
PWCAM5V
PWCAM-6V
PWCAM12V
PWVBUS
PWVBUS
PWVBUS
CLK24
SDCARD
CARDDET
BUS12
SDDAT3
BUS12
SDDAT2
BUS12
SDDAT1
BUS12
SDDAT0
PROTECT
BUS12
SDCMD
DOOROPEN
CARDLEDB
PWFRCM1R8V
PWFRCM1R8V
REMOCON
IROUT
LINE1
LINE2
LINE3
PLUGINL
DPLUGL
PWSWNOREG
POWERSW
PWLIBATT
SRTCSCK
SRTCDT
RTCCS
SYSRST
PWREG3V
PWCP
VREF
CCDONH
SRPH
VBUSCURDEL
VBUSONH
HDDCONT
SBATTRXD
SBATTTXD
DCJACKDET
LCDOPEN
DGND
DGND
DGND
DGND
DGND
DGND
DGND
DGND
DGND
DGND
DGND
DGND
DGND
DGND
DGND
DGND
DGND
DGND
PWHDD3R3V
PWHDD3R3V
PWHDD3R3V
HDM5V
1 2 3 4 5 6 7 8 9 1011121314151617181920212223242526272829303132333435363738394041424344454647484950
100
99989796959493929190898887868584838281807978777675747372717069686766656463626160595857565554535251
: (FOIL SIDE)
PS6102
CARDLEDB
DOOROPEN
BUS12
SDCMD
PROTECT
BUS12
SDDAT0
BUS12
SDDAT1
BUS12
SDDAT2
BUS12
SDDAT3
CARDDET
CLK24
SDCARD
PWVBUS
PWVBUS
PWVBUS
PWCAM12V
PWCAM-6V
PWCAM5V
PWCAM5V
PWCAM5V
PWREG5V
PWREG1R2V
PWREG1R2V
PWREG1R2V
PWREG1R2V
PWLNI1R2V
PWLNI1R2V
PWLNI1R2V
PWLNI1R2V
PWLNI1R2V
PWLNI1R2V
PW3R2VDD3
PW3R2VDD3
PW3R2VDD3
PW3R2VDD3
PW3R2VDD3
PWREG1R8V
PWREG1R8V
PWREG1R8V
PWREG1R8V
GVOUT
GLOUT
GROUT
GPROUT
GPBOUT
GHDYOUT
GGYROREFP
GGYROP
PWSTNOREG2
PWSTNOREG2
PWSTNOREG
PWSTNOREG
HDM5V
PWHDD3R3V
PWHDD3R3V
PWHDD3R3V
DGND
DGND
DGND
DGND
DGND
DGND
DGND
DGND
DGND
DGND
DGND
DGND
DGND
DGND
DGND
DGND
DGND
DGND
LCDOPEN
DCJACKDET
SBATTTXD
SBATTRXD
HDDCONT
VBUSONH
VBUSCURDEL
SRPH
CCDONH
VREF
PWCP
PWREG3V
SYSRST
RTCCS
SRTCDT
SRTCSCK
PWLIBATT
POWERSW
PWSWNOREG
DPLUGL
PLUGINL
LINE3
LINE2
LINE1
IROUT
REMOCON
PWFRCM1R8V
PWFRCM1R8V
5049484746454443424140393837363534333231302928272625242322212019181716151413121110 9 8 7 6 5 4 3 2 1
51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100
PS6101
DCJACKDET
BATT+
BATT+
BATT+
BATT+
BATT+
BATT+
BATT-
BATT-
BATT-
20 19 18 17 16 15 14 13 12 11
1 2 3 4 5 6 7 8 9 10
BATT+
BATT+
DBATT-
BATT-
BATT-
BATT-
BATT-
BATT-
BATT-
SUB P.C.B.(FOIL SIDE)
PP6401
STNOREG
STNOREG
PWREG3V
DGND
DGND
POWERSW
KEYIN1
KEYIN3
STAN
DBY
LEDB
POWERLEDB
DISKLEDB
ZOOMAD
GGYROREFY
GGYROY
PWLIBATT
30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
TRIGEND
CHAEND
CHARGE
MICGND
MICGND
MICOUTL
MICOUTF
MICOUTC
MICOUTB
MICOUTR
PWREG5V
SPOUT1
SPOUT1
SPOUT2
SPOUT2
FP6402
16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
DGND[ZOOM]
NC
AVREF[ZOOM]
ZOOMAD
AVREF
KEYIN1
POWERSW
DGND
NC
AVREF
KEYIN3
POWERLED
STANDBYLED
DISKLED
NC
DGND[LED]
109 8 7 6 5 4 3 2 1
DGND
DGND
DGND
MICOUTL
MICOUTF
MICOUTC
MICOUTB
MICOUTR
PWREG5V
PWREG5V
P6401
2 1SP1
SP2
FP6401
FLASH P.C.B.(FOIL SIDE)
FP6502
PWLCD5V
BUS13
SLLCD1
BUS13
SLLCD3
BUS13
SLLCD5
BUS13
SLLCD7
CLK27
SLLCD
DGND
DGND
DGND
PWLCD8R5V
PWMBL5V
LCDRVS
KEYIN2
KEYIN5
SYSRST
BUS13
SLLCD0
BUS13
SLLCD2
BUS13
SLLCD4
BUS13
SLLCD6
PWLCD3V
DGND
DGND
DGND
DGND
PWMBL5V
MSEL
PWREG3V
KEYIN4
KEYIN5
2 4 6 8 10 12 14 16 18 20 22 24 26 28
1 3 5 7 9 11 13 15 17 19 21 23 25 27 29
FP601
24222018161412108642
252321191715131197531
LCD RVSDGNDDGND
PW MBL5VBL CONTM CKVM STVM ENBM CSVDSDM DSGM STH
CLK3 M CKH2
DGNDDGNDM SEL
PW MBL5VM COMG M BG M RG M GM CSH
PW LCD8R5VCLK3 M CKH1CLK3 M CKH2
SIDE R P.C.B.(FOIL SIDE)
FP4801
GND
ECM[F]
ECM[R]
ECM[B]
ECM[C]
GND
ECM[L]
GND
1 2 3 4 5 6 7 8
FP4802PW REG5VPW REG5VMIC OUT RMIC OUT BMIC OUT CMIC OUT FMIC OUT LD GNDD GNDD GND
12345678910
MIC P.C.B.(FOIL SIDE)
SIDE R FPC
CCDUINT
LENSUNIT
SPEAKER
BATTERY POWER FPC
MONITOR FPC
ECM FPC
MIC FPC
MAIN-SUB FPC
EVR
: (COMPONENT SIDE)
:(COMPONENT SIDE)
![Page 43: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/43.jpg)
S-5
S4.2. Flash Schematic Diagram
MA2YF8000LD7003
D700
1M
A2S1
1100
L
B0JCDD000002
D7006
B0ECGP000006D7002B0
BC30
0000
01D7
004
3
4
2
1
5
G5DYA0000084T7001
0.01[18]C7007
C7008$
C64011u
C700
60.
1
C700116V1[18]
C7003$
F1K2E4730002C7005
F1K2E223A004C7010
16V0
.1C6
402
C7099F1J1C335A121
Q700
12S
C605
4J0L
Q7003
2SC6054J0L
B1ABPF000009Q7002
12
G1
G2K1KA02BA0014
P6401
65
12
43 XP
0460
100L
Q700
4
R7008100
2200
R700
9
R640
122
00[2
2]
R6407 33047
R6408
1MR6
410
47K
R700
1
R7003 47
1M[3
6]R7
004
R7005330K
560KR7006
R700
710
0K[1
8]
R70102200
R701
1
100K
8200R7013
R701422K
R701556
R7022
1K
F2AZ
Z560
0001
C700
4
C6403F3F0J226A032
C6404F3F0J476A032
1 2 43
5678
B1JBLP000014Q7005
4
1 2
3
L2ES00000017IC6401
G1C100KA0115L6401
1
9
7
5
234
6
8
3029
26
2827
2223
1819
16
1213
1011
1514
17
2120
2524
G1
G2
K1KA30B00077PS6401
1
56
32
4
G1
789
10G2 K1MN10BA0197
FP6401
L7001 G1C560MA0024
2
13
G5F1
A000
0021
T700
2
CL6401
CL6403CL6402
CL6404
UNR9
1A5J
0LQR
6402
QR64
03UN
R91A
5J0L
1
8
6
4
23
5
7
9
15
13
1110
12
14
16
G1
G2
FP6402K1MN16BA0197
FRAMEGND
B640
1M
L-61
4S/Z
T
QR7001UNR92A4J0L
QR70
08
UNR9
2A4J
0L
RL70
01
RL70
02
RL70
03
TL7001
TL7002
ZB64
01K3
ZZ00
5000
14
PW_REG5V
PW_REG5V
G_MIC_OUT_R
G_MIC_OUT_R
MIC_GND
MIC_GND
G_MIC_OUT_B
G_MIC_OUT_B
G_MIC_OUT_C
G_MIC_OUT_C
G_MIC_OUT_F
G_MIC_OUT_F
G_MIC_OUT_L
G_MIC_OUT_L
G_GYRO_REFY
G_GYRO_REFY
G_GYROY
G_GYROY
SPOUT2
SPOUT2
SPOUT1
SPOUT1
POWER_LED_B
POWER_LED_B
DISK_LED
DISK_LED
STANDBY_LED_B
STANDBY_LED_B
ZOOMAD
ZOOMAD
KEYIN3
KEYIN3
KEYIN1
KEYIN1
POWER_SW
POWER_SW
PW_REG3V_GYR
STROBE
[TO MAIN]
TO SP
PW_REG5VPW_REG5V
PW_REG5V
TO MIC
MIC_OUT_B
MIC_OUT_B
MIC_OUT_F
MIC_OUT_F
MIC_OUT_L
MIC_OUT_L
MIC_OUT_C
MIC_OUT_C
MIC_OUT_R
MIC_OUT_R
SP2SP1
D_GNDD_GND
D_GND
D_GNDD_GND
D_GND
GNDVREF
OUT VCC
TRIGENDCHAENDCHARGE
MIC_GND
MIC_GND
POWER_SW
POWER_SW
SPOUT1SPOUT1
ST_NOREGST_NOREG
SPOUT2SPOUT2LI_BATT
LI_B
ATT
G_GYROYG_GYRO_REFY
PW_REG3V
KEYIN1
KEYIN1
KEYIN3
KEYIN3
STANDBY_LED_BPOWER_LED_B
ZOOMAD
ZOOMAD
DISK_LED
DISK_LED
TO REAR_OPRETION
STANDBY_LED
NC
NC
NC
D_GND[LED]
AVREF
AVREF
POWER_LED
D_GND[ZOOM]
AVREF[ZOOM]
HDC-SD9 SeriesFlashSchematic Diagram
10987654321
G
F
E
D
C
B
A
![Page 44: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/44.jpg)
S-6
S4.3. Side R Schematic Diagram
HDC-SD9 SeriesSide R Section(Side R P.C.B. (1/2))Schematic Diagram
10987654321
G
F
E
D
C
B
A
![Page 45: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/45.jpg)
S-7
S4.4. LCD Schematic Diagram
HDC-SD9 SeriesLCD Section(Side R P.C.B. (2/2))Schematic Diagram
10987654321
G
F
E
D
C
B
A
![Page 46: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/46.jpg)
S-8
S4.5. Mic Schematic Diagram
HDC-SD9 SeriesMicSchematic Diagram
10987654321
G
F
E
D
C
B
A
![Page 47: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/47.jpg)
S-9
S4.6. Monitor Schematic Diagram
HDC-SD9 SeriesMonitorSchematic Diagram
10987654321
G
F
E
D
C
B
A
![Page 48: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/48.jpg)
S-10
S4.7. CCD FPC Schematic Diagram
HDC-SD9 SeriesCCD FPCSchematic Diagram
10987654321
G
F
E
D
C
B
A
![Page 49: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/49.jpg)
S-11
S5. Print Circuit BoardS5.1. Flash P.C.B.
HDC-SD9 SeriesFlash P.C.B.
10987654321
G
F
E
D
C
B
A
(Component Side)
(Foil Side)
![Page 50: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/50.jpg)
S-12
S5.2. Side R P.C.B.
HDC-SD9 SeriesSide R P.C.B.
10987654321
G
F
E
D
C
B
A
(Component Side) (Foil Side)
![Page 51: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/51.jpg)
S-13
S5.3. Mic P.C.B.
HDC-SD9 SeriesMic P.C.B.
10987654321
G
F
E
D
C
B
A
(Component Side) (Foil Side)
![Page 52: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/52.jpg)
S-14
S5.4. Monitor P.C.B.
S5.4.1. Monitor P.C.B. (Component Side)
HDC-SD9 SeriesMonitor P.C.B.(Component Side)
10987654321
G
F
E
D
C
B
A
(Component Side)
![Page 53: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/53.jpg)
S-15
S5.4.2. Monitor P.C.B. (Foil Side)
HDC-SD9 SeriesMonitor P.C.B.(Foil Side)
10987654321
G
F
E
D
C
B
A
(Foil Side)
![Page 54: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/54.jpg)
S-16
S5.5. CCD FPC P.C.B.
S5.5.1. CCD FPC P.C.B. (Component Side)
HDC-SD9 SeriesCCD FPC P.C.B.(Component Side)
10987654321
G
F
E
D
C
B
A
(Component Side)
![Page 55: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/55.jpg)
S-17
S5.5.2. CCD FPC P.C.B. (Foil Side)
HDC-SD9 SeriesCCD FPC P.C.B.(Foil Side)
10987654321
G
F
E
D
C
B
A
(Foil Side)
![Page 56: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/56.jpg)
S-18
![Page 57: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/57.jpg)
S6. Replacement Parts List
S-19
“Matsushita Battery Industrial Co., Ltd.”1. Parts marked with [MBI] in the remarks column are supplied from
Definition of Parts supplier:
E.S.D. standards for Electrostatically Sensitive Devices, refer to “PREVENTION OF ELECTROSTATIC DISCHARGE (ESD) TO ELECTROSTATICALLY SENSITIVE (ES) DEVICES”section.
of this assembly in production, it will no longer be available.
All resistors are in OHMS, K=1,000 OHMS. All capacitors are in MICRO-FARADS (uf), P=uuF.
Components identified with the mark have the special characteristics for safety. When replacing any of these components, use only the same type.
2. IMPORTANT SAFETY NOTICE
3. Unless otherwise specified,
4. The marking (RTL) indicates the retention time is limited for this item. After the discontinuation
1.* Be sure to make your orders of replacement parts according to this list.Note:
![Page 58: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/58.jpg)
HDC-SD9P/PC/PL/EG/EG/EF/E/EP/EB/GC/SG/EE/GN/GK/DE/DEB/DEG vol.1
Ref.No. Part No. Part Name & Description Pcs Remarks Ref.No. Part No. Part Name & Description Pcs Remarks R6407 ERJ2GEJ331 M.RESISTOR CH 1/16W 330 1 ## VEP03H43H MAIN P.C.B. 1 (RTL) E.S.D. PC/P R6408 ERJ2GEJ470 M.RESISTOR CH 1/16W 47 1
R6410 ERJ2GEJ105 M.RESISTOR CH 1/16W 1M 1 ## VEP03H43J MAIN P.C.B. 1 (RTL) E.S.D. DE/EF/EG/E R7001 ERJ2GEJ473Y M.RESISTOR CH 1/16W 47K 1
R7003 ERJ2GEJ470 M.RESISTOR CH 1/16W 47 1 ## VEP03H43K MAIN P.C.B. 1 (RTL) E.S.D. GC/SG R7004 ERJ8GEYJ105V M.RESISTOR CH 1/8W 1M 1
R7005 ERJ2GEJ334 M.RESISTOR CH 1/16W 330K 1 ## VEP03H43L MAIN P.C.B. 1 (RTL) E.S.D. EE R7006 ERJ2GEJ564 M.RESISTOR CH 1/16W 560K 1
R7007 ERJ3GEYJ104 M.RESISTOR CH 1/10W 100K 1 ## VEP03H43M MAIN P.C.B. 1 (RTL) E.S.D. GK R7008 ERJ2GEJ101 M.RESISTOR CH 1/16W 100 1
R7009 ERJ2GEJ222 M.RESISTOR CH 1/16W 2.2K 1 ## VEP03H43S MAIN P.C.B. 1 (RTL) E.S.D. DEG/EP R7010 ERJ2GEJ222 M.RESISTOR CH 1/16W 2.2K 1
R7011 ERJ2GEJ104 M.RESISTOR CH 1/16W 100K 1 ## VEP03H43T MAIN P.C.B. 1 (RTL) E.S.D. PL R7013 ERJ2GEJ822 M.RESISTOR CH 1/16W 8.2K 1
R7014 ERJ2GEJ223 M.RESISTOR CH 1/16W 22K 1 ## VEP03H43U MAIN P.C.B. 1 (RTL) E.S.D. GN R7015 ERJ2GEJ560 M.RESISTOR CH 1/16W 56 1
R7022 ERJ2GEJ102X M.RESISTOR CH 1/16W 1K 1 ## VEP03H43V MAIN P.C.B. 1 (RTL) E.S.D. DEB/EB
T7001 G5DYA0000084 SWITCHING TRANSFORMER 1 ## VEP01A02A SUB P.C.B. 1 (RTL) E.S.D. T7002 G5F1A0000021 TRIGGER COIL 1
## VEP26312A FLASH P.C.B. 1 (RTL) E.S.D. ZB6401 K3ZZ00500014 CONNECTOR 1
## VEP29200A SIDE (R) P.C.B. 1 (RTL) E.S.D.
## VEP24191A MIC P.C.B. 1 (RTL) E.S.D. ## VEP29200A SIDE (R) P.C.B. (RTL) E.S.D.
## VEP26301A MONITOR P.C.B. 1 (RTL) E.S.D. C601 F3F0G4760003 E.CAPACITOR CH 4V 47U 1 C604 F1G0J1050007 C.CAPACITOR CH 6.3V 1U 1 C605 F1G1C104A080 C.CAPACITOR CH 16V 0.1U 1 C606 F1G1C104A080 C.CAPACITOR CH 16V 0.1U 1 ## VEP26312A FLASH P.C.B. (RTL) E.S.D. C607 F1H0J225A002 C.CAPACITOR CH 6.3V 2.2U 1 C608 F1H0J225A002 C.CAPACITOR CH 6.3V 2.2U 1
B6401 ML-614S/ZT BATTERY 1 E.S.D./MBI C609 F1G1C104A080 C.CAPACITOR CH 16V 0.1U 1 C613 F1G0J1050007 C.CAPACITOR CH 6.3V 1U 1C6401 F1G0J1050007 C.CAPACITOR CH 6.3V 1U 1 C614 F1G0J1050007 C.CAPACITOR CH 6.3V 1U 1C6402 F1G1C104A080 C.CAPACITOR CH 16V 0.1U 1 C615 F1G1C104A080 C.CAPACITOR CH 16V 0.1U 1C6403 F3F0J226A032 T.CAPACITOR CH 6.3V 22U 1 C616 F1J0J106A049 C.CAPACITOR CH 6.3V 10U 1C6404 F3F0J476A032 E.CAPACITOR CH 6.3V 47U 1 C6501 ECJ0EB1C103K C.CAPACITOR CH 16V 0.01U 1C7001 ECJ1VB1C105K C.CAPACITOR CH 16V 1U 1 C6502 ECJ0EB1C103K C.CAPACITOR CH 16V 0.01U 1C7004 F2AZZ5600001 CAPACITOR 1 C6503 ECJ0EB1C103K C.CAPACITOR CH 16V 0.01U 1C7005 F1K2E4730005 CAPACITOR 1 C6504 ECJ0EB1C103K C.CAPACITOR CH 16V 0.01U 1C7006 F1G1A104A012 C.CAPACITOR CH 10V 0.1U 1 C6505 F1G1C104A080 C.CAPACITOR CH 16V 0.1U 1C7007 ECJ1VB1H103K C.CAPACITOR CH 50V 0.01U 1 C6506 F1G1C104A080 C.CAPACITOR CH 16V 0.1U 1C7010 F1K2E223A004 C.CAPACITOR 250V 0.022U 1 C6508 ECJ0EB1C103K C.CAPACITOR CH 16V 0.01U 1C7099 F1J1C335A121 C.CAPACITOR CH 16V 3.3U 1 C6509 F1G0J1050007 C.CAPACITOR CH 6.3V 1U 1 C6511 ECJ0EB1C103K C.CAPACITOR CH 16V 0.01U 1D7001 MA2S11100L DIODE 1 E.S.D. C6512 ECJ0EB1C103K C.CAPACITOR CH 16V 0.01U 1D7002 B0ECGP000006 DIODE 1 E.S.D. C6513 F1G1C104A080 C.CAPACITOR CH 16V 0.1U 1D7003 MA2YF8000L DIODE 1 E.S.D. D7004 B0BC30000001 DIODE 1 E.S.D. FP601 K1MN25BA0199 CONNECTOR 25P 1D7006 B0JCDD000002 DIODE 1 E.S.D. FP6502 K1MN29BA0259 CONNECTOR 29P 1 FP6401 K1MN10BA0197 CONNECTOR 10P 1 IC601 C1AB00002388 IC 1 E.S.D.FP6402 K1MN16BA0197 CONNECTOR 16P 1 IC604 C0DBGGC00011 IC 1 E.S.D. IC6401 L2ES00000017 GYROSCOPE 1 E.S.D. R603 ERJ2RHD511 M.RESISTOR CH 1/16W 510 1 R604 ERJ2RHD102 M.RESISTOR CH 1/16W 1K 1L6401 G1C100KA0115 CHIP INDUCTOR 10UH 1 R605 D0YAR0000007 M.RESISTOR CH 1/16W 0 1L7001 G1C560MA0024 CHIP INDUCTOR 56UH 1 R606 D0YAR0000007 M.RESISTOR CH 1/16W 0 1 R6501 ERJ2GEJ183 M.RESISTOR CH 1/16W 18K 1P6401 K1KA02BA0014 CONNECTOR 2P 1 R6502 ERJ2GEJ302 M.RESISTOR CH 1/16W 3K 1 R6503 ERJ2RHD682X M.RESISTOR CH 1/16W 6.8K 1PS6401 K1KA30B00077 CONNECTOR 30P 1 R6504 D0YAR0000007 M.RESISTOR CH 1/16W 0 1 R6506 ERJ2GEJ101 M.RESISTOR CH 1/16W 100 1Q7001 2SC6054J0L TRANSISTOR 1 E.S.D. R6507 ERJ2GEJ473Y M.RESISTOR CH 1/16W 47K 1Q7002 B1ABPF000009 TRANSISTOR 1 E.S.D. R6508 D0YAR0000007 M.RESISTOR CH 1/16W 0 1Q7003 2SC6054J0L TRANSISTOR 1 E.S.D. R6509 ERJ2GEJ473Y M.RESISTOR CH 1/16W 47K 1Q7004 XP0460100L TRANSISTOR 1 E.S.D. R6510 ERJ2GEJ392 M.RESISTOR CH 1/16W 3.9K 1Q7005 B1JBLP000014 TRANSISTOR 1 E.S.D. R6511 D0YAR0000007 M.RESISTOR CH 1/16W 0 1 R6512 ERJ2GEJ302 M.RESISTOR CH 1/16W 3K 1QR6402 UNR91A5J0L TRANSISTOR 1 E.S.D. R6513 ERJ2GEJ392 M.RESISTOR CH 1/16W 3.9K 1QR6403 UNR91A5J0L TRANSISTOR 1 E.S.D. R6514 ERJ2RHD682X M.RESISTOR CH 1/16W 6.8K 1QR7001 UNR92A4J0L TRANSISTOR 1 E.S.D. R6515 ERJ2GEJ183 M.RESISTOR CH 1/16W 18K 1QR7008 UNR92A4J0L TRANSISTOR 1 E.S.D. R6516 ERJ2GEJ103 M.RESISTOR CH 1/16W 10K 1 R6517 ERJ2GEJ102X M.RESISTOR CH 1/16W 1K 1R6401 ERJ6GEYJ222V M.RESISTOR CH 1/10W 2.2K 1
S-20
![Page 59: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/59.jpg)
HDC-SD9P/PC/PL/EG/EG/EF/E/EP/EB/GC/SG/EE/GN/GK/DE/DEB/DEG vol.1
Ref.No. Part No. Part Name & Description Pcs Remarks Ref.No. Part No. Part Name & Description Pcs RemarksS6501 K0H1BA000436 SWITCH 1 D905 MAZ80470HL DIODE 1 E.S.D.S6502 K0H1BA000436 SWITCH 1 D909 MAZ80620ML DIODE 1 E.S.D.S6503 K0H1BA000436 SWITCH 1 S6504 K0H1BA000436 SWITCH 1 FP901 K1MN23AA0035 CONNECTOR 23P 1S6505 EVQPQ6B55 SWITCH 1 FP902 K1MN20BA0262 CONNECTOR 20P 1S6506 VSS0533 SWITCH 1 S6507 K0MG55000004 SWITCH 1 L901 G1C101KA0055 CHIP INDUCTOR 100UH 1S6508 K0H1BA000436 SWITCH 1 Q901 2SC6054J0L TRANSISTOR 1 E.S.D.VA6505 D4ED18R00003 VARISTORS 1 Q902 2SC6054J0L TRANSISTOR 1 E.S.D.VA6506 D4ED18R00003 VARISTORS 1 Q903 2SC6054J0L TRANSISTOR 1 E.S.D. Q905 2SA2174J0L TRANSISTOR 1 E.S.D. Q910 2SA2174J0L TRANSISTOR 1 E.S.D. ## VEP24191A MIC P.C.B. (RTL) E.S.D. R901 ERJ2RKD220 M.RESISTOR CH 1/16W 22 1 R902 ERJ2RKD220 M.RESISTOR CH 1/16W 22 1C4801 ECJ0EB1A473K C.CAPACITOR CH 10V 0.047U 1 R903 ERJ2RKD220 M.RESISTOR CH 1/16W 22 1C4802 ECJ0EC1H220J C.CAPACITOR CH 50V 22P 1 R904 D0YAR0000007 M.RESISTOR CH 1/16W 0 1C4803 ECJ0EB1A473K C.CAPACITOR CH 10V 0.047U 1 R905 D0YAR0000007 M.RESISTOR CH 1/16W 0 1C4804 ECJ0EC1H220J C.CAPACITOR CH 50V 22P 1 R906 D0YAR0000007 M.RESISTOR CH 1/16W 0 1C4805 ECJ0EB1A473K C.CAPACITOR CH 10V 0.047U 1 R910 ERJ2GEJ104 M.RESISTOR CH 1/16W 100K 1C4806 ECJ0EC1H220J C.CAPACITOR CH 50V 22P 1 R913 ERJ2RHD273 M.RESISTOR CH 1/16W 27K 1C4807 ECJ0EB1A473K C.CAPACITOR CH 10V 0.047U 1 R914 ERJ2RHD103 M.RESISTOR CH 1/16W 10K 1C4808 ECJ0EC1H220J C.CAPACITOR CH 50V 22P 1 R915 ERJ2GEJ152 M.RESISTOR CH 1/16W 1.5K 1C4809 ECJ0EB1A473K C.CAPACITOR CH 10V 0.047U 1 C4810 ECJ0EC1H220J C.CAPACITOR CH 50V 22P 1C4811 ECJ0EC1H101J C.CAPACITOR CH 50V 100P 1C4812 ECJ0EC1H101J C.CAPACITOR CH 50V 100P 1C4813 ECJ0EC1H101J C.CAPACITOR CH 50V 100P 1C4814 ECJ0EC1H101J C.CAPACITOR CH 50V 100P 1C4815 ECJ0EC1H101J C.CAPACITOR CH 50V 100P 1C4816 F3E0J106A009 E.CAPACITOR CH 6.3V 22U 1C4817 F3F0J226A032 T.CAPACITOR CH 6.3V 22U 1C4818 F1G0J1050007 C.CAPACITOR CH 6.3V 1U 1 FP4801 K1MN08BA0197 CONNECTOR 8P 1FP4802 K1MN10BA0197 CONNECTOR 10P 1 IC4801 C0ABBB000369 IC 1 E.S.D.IC4802 C0ABBB000369 IC 1 E.S.D.IC4803 C0ABBB000369 IC 1 E.S.D. Q4801 2SD2216J0L TRANSISTOR 1 E.S.D. R4801 VRE0071E392 M.RESISTOR CH 1/10W 3.9K 1R4802 VRE0071E392 M.RESISTOR CH 1/10W 3.9K 1R4803 VRE0071E392 M.RESISTOR CH 1/10W 3.9K 1R4804 VRE0071E392 M.RESISTOR CH 1/10W 3.9K 1R4805 VRE0071E392 M.RESISTOR CH 1/10W 3.9K 1R4806 ERJ2GEJ183 M.RESISTOR CH 1/16W 18K 1R4807 ERJ2GEJ154 M.RESISTOR CH 1/16W 150K 1R4808 ERJ2GEJ183 M.RESISTOR CH 1/16W 18K 1R4809 ERJ2GEJ154 M.RESISTOR CH 1/16W 150K 1R4810 ERJ2GEJ183 M.RESISTOR CH 1/16W 18K 1R4811 ERJ2GEJ154 M.RESISTOR CH 1/16W 150K 1R4812 ERJ2GEJ183 M.RESISTOR CH 1/16W 18K 1R4813 ERJ2GEJ154 M.RESISTOR CH 1/16W 150K 1R4814 ERJ2GEJ183 M.RESISTOR CH 1/16W 18K 1R4815 ERJ2GEJ154 M.RESISTOR CH 1/16W 150K 1R4816 ERJ2GEJ472 M.RESISTOR CH 1/16W 4.7K 1R4817 ERJ2GEJ223 M.RESISTOR CH 1/16W 22K 1R4818 ERJ2GEJ333 M.RESISTOR CH 1/16W 33K 1 ## VEP26301A MONITOR P.C.B. (RTL) E.S.D. C901 F1J1A475A023 C.CAPACITOR CH 10V 4.7U 1C907 F1H0J225A002 C.CAPACITOR CH 6.3V 2.2U 1C908 F1J1A2250007 C.CAPACITOR CH 10V 2.2U 1C909 F1H0J475A010 C.CAPACITOR CH 6.3V 4.7U 1C910 F1G1C104A080 C.CAPACITOR CH 16V 0.1U 1C912 F1H0J475A010 C.CAPACITOR CH 6.3V 4.7U 1 D901 B3AFB0000200 LED 1 E.S.D.D902 B3AFB0000200 LED 1 E.S.D.D903 B3AFB0000200 LED 1 E.S.D.
S-21
![Page 60: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/60.jpg)
HDC-SD9P/PC/PL/EG/EG/EF/E/EP/EB/GC/SG/EE/GN/GK/DE/DEB/DEG vol.1
Ref.No. Part No. Part Name & Description Pcs Remarks Ref.No. Part No. Part Name & Description Pcs Remarks B51 XQN16+BJ4FN SCREW 11 VYQ4213 LENS HOOD UNIT 1 (-S) B52 XQN16+BJ4FN SCREW 11 VYQ4308 LENS HOOD UNIT 1 (-K) B53 XQN16+BJ4FN SCREW 12 VKM7395 R COVER 1 B54 XQN16+BJ4FN SCREW 13 VYK2J74 SIDE CASE (L) UNIT 1 B55 XQN16+BJ4FN SCREW 113 VYQ4211 MIC NET UNIT 1 (-S) B56 VHD1411 SCREW 113 VYQ4307 MIC NET UNIT 1 (-K) B57 VHD1411 SCREW 114 VSC6035 FRONT EARTH PLATE 115 N9ZZ00000326 BARRIER MOTOR UNIT 116 VML3925 BARRIER SELECT KNOB 1 17 VDW1233 FRONT FRAME 1 18 VMG1705 LENS DAMPER RUBBER 119 VKM7388 FRONT CASE 1 (-S) 19 VKM7498 FRONT CASE 1 (-K) 20 VGQ9846 SHADING PLATE 121 VMG1107 DUMPER RUBBER 122 VMP9013 HINGI ANGLE 126 N9ZZ00000386 REAR OPERATION UNIT 1 (-S) 26 N9ZZ00000392 REAR OPERATION UNIT 1 (-K) 27 VMP9025 MIC ANGLE 128 VWJ2019 MIC FPC 129 VEP24191A MIC P.C.B. 1 (RTL) E.S.D.30 VGQ9862 SHEET 131 VMP9018 TOP FRAME 132 L0AA02A00075 SPEAKER UNIT 133 VGQ9752 BOUON SHEET 134 VGL1269 TALY PAEL LIGHT 135 VKA0397 SET LEG CUSHION 136 VKW3379 SENSOR WINDOW 137 VEP29200A SIDE (R) P.C.B. 1 (RTL) E.S.D.38 VGU0C22 OPERATION BUTTON 139 VGU0B50 SR SWITCH KNOB 140 VSC6034 SR EARTH BOARD 141 VKF4324 JACK COVER 142 VMG1822 LCD CUSHION 143 VKM7453 SIDE CASE (R) 144 VGQ9735 CROSS KEY 145 VGQ9753 JOY CUSHION 146 VWJ2020 SIDE (R) FPC 147 VEP04930B ECM FPC 1 (RTL) E.S.D.48 VMT1784 MIC DUMPER 1
49 VQL1R62 CAUTION LABEL 1 PS 49 VQL1R63 CAUTION LABEL 1 PCS
49 VQL1R64 CAUTION LABEL 1 (EXCEPT P/PC/GK) 49 VQL1R65 CAUTION LABEL 1 GKS 61 VKM7389 TOP CASE 1 (-S) 61 VKM7497 TOP CASE 1 (-K) 63 VGQ9886 FPC PLATE 1 B1 XQN16+B4FJK SCREW 1B2 XQN16+B4FJK SCREW 1B3 XQN16+B4FJK SCREW 1B4 XQN16+B4FJK SCREW 1B5 XQN16+B4FJK SCREW 1B6 XQN16+BJ5FJK SCREW 1B7 XQN16+BJ4FJK SCREW 1B8 XQN16+BJ4FJK SCREW 1B11 XQN16+B4FJK SCREW 1B12 XQN16+B4FJK SCREW 1B13 XQN16+B5FJK SCREW 1B16 XQN16+B5FJK SCREW 1B17 XQN16+B5FJK SCREW 1B18 XQN16+B12FJK SCREW 1B19 XQN16+BJ4FJK SCREW 1B20 XQN16+B4FJK SCREW 1B21 XQN16+B4FJK SCREW 1B22 XQN16+B4FJK SCREW 1B23 VHD1902 SCREW 1B24 VHD1902 SCREW 1B40 XQN16+BJ6FN SCREW 1B41 XQN16+BJ6FN SCREW 1B42 XQN16+BJ6FN SCREW 1B46 XQN16+BJ4FN SCREW 1B47 VHD1919 SCREW 1B48 XQN16+BJ4FN SCREW 1B49 XQN16+BJ4FN SCREW 1B50 XQN16+BJ4FN SCREW 1
S-22
![Page 61: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/61.jpg)
HDC-SD9P/PC/PL/EG/EG/EF/E/EP/EB/GC/SG/EE/GN/GK/DE/DEB/DEG vol.1
Ref.No. Part No. Part Name & Description Pcs Remarks Ref.No. Part No. Part Name & Description Pcs Remarks 4 VSC5761 CCD HEAT SINK PLATE 1 151 VGQ9736 HINGE COVER T 15 VGQ9574 RADIATION SHEET CCD 1 152 VXD0518 LCD HINGE UNIT 1 (W/SW601)6 VGQ9834 GASKET 1 153 VGQ9737 HINGE COVER B 17 VMP9094 SHADING PLATE 1 154 VYK2K97 LCD CASE T UNIT 1 PS,EGS,EGK,ES,EPS,8 VEP03H43H MAIN P.C.B. 1 (RTL) E.S.D. PS,PCS EBS,GCS,SGS,GNS8 VEP03H43T MAIN P.C.B. 1 (RTL) E.S.D. PLS 154 VYK2K95 LCD CASE T UNIT 1 PCS 8 VEP03H43J MAIN P.C.B. 1 (RTL) E.S.D. 154 VYK2K96 LCD CASE T UNIT 1 PLS
EGS,EGK,EFK,ES,DEK 154 VYK2N66 LCD CASE T UNIT 1 EFK 8 VEP03H43S MAIN P.C.B. 1 (RTL) E.S.D. EPS,DEGK 154 VYK2K98 LCD CASE T UNIT 1 EES 8 VEP03H43V MAIN P.C.B. 1 (RTL) E.S.D. EBS,DEBK 154 VYK2K99 LCD CASE T UNIT 1 GKS 8 VEP03H43K MAIN P.C.B. 1 (RTL) E.S.D. GCS,SGS 154 VYK2N67 LCD CASE T UNIT 1 DEK,DEBK,DEGK 8 VEP03H43L MAIN P.C.B. 1 (RTL) E.S.D. EES 155 VSC6003 LCD EARTH PLATE 18 VEP03H43U MAIN P.C.B. 1 (RTL) E.S.D. GNS 156 VEP26301A MONITOR P.C.B. 1 (RTL) E.S.D.8 VEP03H43M MAIN P.C.B. 1 (RTL) E.S.D. GKS 157 VGL1256 REFLECTION SHEET 19 VYK2J52 MAIN FRAME UNIT 1 158 VKW3365 LIGHTING PLATE 110 VEP21298A MAIN-SUB FPC 1 E.S.D. 159 VGL1255 DIFFUSION SHEET 111 VEP01A02A SUB P.C.B. 1 (RTL) E.S.D. 160 VGL1254 PRISM SHEET B 112 VYK2J69 BUTTOM FRAME UNIT 1 161 VGL1253 PRISM SHEET A 123 VSC6031 CCD SHIELD CASE 1 162 VGQ9584 LIGHTING PLATE HOLDER 124 VMP9005 REAR FRAME 1 163 L5BDDXP00002 LCD 125 VEP21297A POWER FPC 1 E.S.D.(W/JK6751,JK6752) 164 VSC6004 MONITOR EARTH PLATE 150 VEP26312A FLASH P.C.B. 1 (RTL) E.S.D. 165 VYK2J66 LCD CASE (B) UNIT 151 VYK2J51 LENS PLATE UNIT 1 52 EFN-MVY55ZC FLASH UNIT 1 B151 VHD1828 SCREW 153 VGQ9726 CONDENSOR COVER 1 B152 VHD1828 SCREW 155 VYK2J71 SD DOOR UNIT 1 56 VKM7381 BATTERY CASE 1 57 VGQ9767 BATT RELEASE HOLDER 158 VGQ9728 BATTERY RELEASE KNOB 159 VMB4179 BATTERY RELEASE SPRING 160 VKF4293 HDMI COVER 162 VGQ9887 CUSHION 164 VGQ9888 CUSHION 1 B9 XQN16+B6FJK SCREW 1B10 XQN16+B6FJK SCREW 1B14 XQN16+B5FJK SCREW 1B15 XQN16+B5FJK SCREW 1B25 XQN16+B3FJK SCREW 1B29 XQN16+B4FJK SCREW 1B30 XQN16+BJ5FJK SCREW 1B31 VHD1353 SCREW 1B32 XQN16+BJ4FN SCREW 1B33 VHD1907 SCREW 1B34 VHD1907 SCREW 1B35 VHD1907 SCREW 1B36 VHD1907 SCREW 1B37 VHD1907 SCREW 1B38 VHD1907 SCREW 1B39 XQN16+BJ4FN SCREW 1B43 XQN16+BJ4FN SCREW 1B44 VHD1907 SCREW 1B45 XQN16+B4FJK SCREW 1B58 XQN16+BJ4FN SCREW 1B59 XQN16+BJ5FJK SCREW 1
S-23
![Page 62: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/62.jpg)
HDC-SD9P/PC/PL/EG/EG/EF/E/EP/EB/GC/SG/EE/GN/GK/DE/DEB/DEG vol.1
Ref.No. Part No. Part Name & Description Pcs Remarks Ref.No. Part No. Part Name & Description Pcs Remarks 201 VXQ1548 PRISM UNIT 1201-1 VEP22388A CCD FPC 1 (RTL) E.S.D.203 VXP2530 2ND LENS FRAME MOVE UNIT 1205 VXQ1521 MAIN FRAME 1206 VXQ1534 OIS UNIT 1207 VXP2923 IRIS UNIT 1208 L6HA64NC0003 ZOOM MOTOR UNIT 1209 L6HA66NC0012 STEPPING MOTORS 1210 VMS7638 GUIDE POLE 1211 VMS7638 GUIDE POLE 1212 VXP2531 4TH LENS FRAME MOVE UNIT 1217 VDW1213 MASTER FLANGE 1218 VDL1748 OPTICAL FILTER 1219 VXW0938 LENS UNIT (W/O CCD) 1220 VGQ9810 CCD HEAT TRANSFER SHEET 1 B201 XQN16+CJ7FJ SCREW 1B202 XQN16+CJ7FJ SCREW 1B203 XQN16+CJ7FJ SCREW 1B204 XQN16+CJ5FJ SCREW 1B205 XQN16+CJ5FJ SCREW 1B206 XQN16+CJ5FJ SCREW 1B207 XQN16+CJ5FJ SCREW 1B208 XQN16+CJ5FJ SCREW 1B209 XQN16+CJ5FJ SCREW 1B210 XQN16+CJ5FJ SCREW 1B211 XQN16+CJ5FJ SCREW 1B212 XQN16+CJ5FJ SCREW 1B213 XQN16+CJ5FJ SCREW 1
S-24
![Page 63: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/63.jpg)
HDC-SD9P/PC/PL/EG/EG/EF/E/EP/EB/GC/SG/EE/GN/GK/DE/DEB/DEG vol.1
Ref.No. Part No. Part Name & Description Pcs Remarks Ref.No. Part No. Part Name & Description Pcs Remarks 317 VPN6639 PAD 1301 VFF0409-S CD-ROM 1 PS,PCS 318 VPF1129 PROTECTION BAG 1301 VFF0410-S CD-ROM 1 (EXCEPT P/PC) 319 K2CQ2CA00006 AC CABLE 1 EGS,EGK,EFK,ES,EPS,GCS,304 VPF1112 POLYETHYLENE BAG 1 PS,PCS,PLS,EFK,EBS, SGS,EES,DEK,DEGK
EES,GNS,GKS,DEBK 320 K2CT3CA00004 AC CABLE 1 EBS,GCS,SGS,DEBK 304 VPF1228 POLLY BAG 1 EGS,EGK,ES,EPS,GCS, 321 K2CJ2DA00008 AC CABLE 1 GNS
SGS,DEK,DEGK 322 K2CA2CA00025 AC CABLE 1 PS,PCS,PLS 305 VQT1N45 OPERATING INSTRUCTIONS 1 PS,PCS 322 K2CA2CA00020 AC CABLE 1 GKS
(ENGLISH) 325 K2CP2CA00001 AC CABLE 1 GCS,SGS 305 VQT1N46 OPERATING INSTRUCTIONS 1 PCS 326 VPQ0266 SHEET 1
(CANADIAN FRENCH) 305 VQT1N47 OPERATING INSTRUCTIONS 1 PLS
(ENGLISH) 305 VQT1N48 OPERATING INSTRUCTIONS 1 PLS
(SPANISH) 305 VQT1N49 OPERATING INSTRUCTIONS 1 EGS,EGK
(GERMAN) 305 VQT1N50 OPERATING INSTRUCTIONS 1 EGS,EGK,EFK
(FRENCH) 305 VQT1N51 OPERATING INSTRUCTIONS 1 EGS,EGK,DEGK
(ITALIAN) 305 VQT1N52 OPERATING INSTRUCTIONS 1 EGS,EGK
(DUTCH) 305 VQT1N53 OPERATING INSTRUCTIONS 1 EGS,EGK,DEGK
(TURKISH) 305 VQT1N54 OPERATING INSTRUCTIONS 1 ES
(PORTUGUESE) 305 VQT1N55 OPERATING INSTRUCTIONS (S 1 ES 305 VQT1N56 OPERATING INSTRUCTIONS (S 1 ES,DEK 305 VQT1N57 OPERATING INSTRUCTIONS 1 ES,DEK
(DANISH) 305 VQT1N58 OPERATING INSTRUCTIONS 1 EPS,DEK,DEGK
(ENGLISH) 305 VQT1N59 OPERATING INSTRUCTIONS 1 EPS,DEGK
(POLISH) 305 VQT1N60 OPERATING INSTRUCTIONS 1 EPS,DEGK
(CZECH) 305 VQT1N61 OPERATING INSTRUCTIONS 1 EPS,DEGK
(HUNGARIAN) 305 VQT1N62 OPERATING INSTRUCTIONS 1 EBS,DEBK
(ENGLISH) 305 VQT1N63 OPERATING INSTRUCTIONS 1 GCS,SGS
(CHINESE(TRADITIONAL)) 305 VQT1N64 OPERATING INSTRUCTIONS 1 GCS,SGS
(ENGLISH) 305 VQT1N65 OPERATING INSTRUCTIONS 1 GCS,SGS
(ARABIC) 305 VQT1N66 OPERATING INSTRUCTIONS 1 GCS,SGS
(PERSIAN) 305 VQT1N67 OPERATING INSTRUCTIONS 1 GCS,SGS
(TURKISH) 305 VQT1N68 OPERATING INSTRUCTIONS 1 GCS,SGS
(HUNGARIAN) 305 VQT1N69 OPERATING INSTRUCTIONS 1 EES
(RUSSIAN) 305 VQT1N70 OPERATING INSTRUCTIONS 1 EES
(UKRAINIAN) 305 VQT1N71 OPERATING INSTRUCTIONS 1 GNS
(ENGLISH) 305 VQT1N72 OPERATING INSTRUCTIONS 1 GKS
(CHINESE(SIMPLIFIED))306 VPF1214 SD CARD BAG, POLYETHYLENE 1 GCS,SGS,EES,DEK,DEBK,DEGK 307 ------------ SD CARD 1 GCS,SGS,EES,DEK,DEBK,DEGK 308 K2KC4CB00027 AV CABLE 1310 K2KZ4CB00011 USB CABLE 1311 K2KZ9DB00004 COMPONENT CABLE 1312 K2GJYYC00001 DC CABLE 1
313 ------------ BATTERY PACK 1314 N2QAEC000023 REMOTE CONTROL 1
315 DE-A51BA AC ADAPTOR 1 PS,PCS 315 DE-A51CA AC ADAPTOR 1 (EXCEPT P/PC/GK) 315 DE-A51DA AC ADAPTOR 1 GKS
316 VPG1Q21 PACKING CASE 1 PS,PCS 316 VPG1Q22 PACKING CASE 1 PLS,EGS,ES,EPS,EBS,GCS,
SGS,EES,GNS,GKS316 VPG1S57 PACKING CASE 1 EGK,EFK 316 VPG1S58 PACKING CASE 1 DEK,DEBK,DEGK
S-25
![Page 64: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/64.jpg)
S7. Exploded ViewS7.1. Frame and Casing Section (1)
S-26
63B54
B55
B52
B53B51
46
B19B16
B17B18
B2
B3
B4
3
33
B49B50
30
492
34
20
35
B20
1619
1817
B21
B22
1
15
14
B42B41
B40
21
22
38
3745
44
39 4043
B7
B8
B13B642
41B12B5
B11B1
B56
B57
13
47
48
26
61 32
31
B24
B23
B48
28
B47
29
27
36
B46
![Page 65: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/65.jpg)
S7.2. Frame and Casing Section (2)
S-27
B45
B9
B29B10
B25
B14
B15
12
9
B38
B37
B36B35
1110
B34
64
8
B325
6
4
51
50
B33
B31
53B39
52
B44
B4323
24
B58 5759
58
25
62 60
55
B59
7
56B30
![Page 66: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/66.jpg)
S7.3. LCD Section
S-28
161
160
159
158
157
156
B151
B152
154
162
163
164
155
165
151
152153
![Page 67: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/67.jpg)
S7.4. Camera Lens Section
S-29
220B212
B213
201
218201-1
B203217
B202
B201
212206
B209
207
B208
B210
B211
211
210205
B205
B204
B207
B206
209 208
203
219
![Page 68: HDCSD9](https://reader033.vdocuments.us/reader033/viewer/2022052819/54394ca9afaf9fbe2e8b4d6f/html5/thumbnails/68.jpg)
S7.5. Packing Parts and Accessories Section
S-30
312
310
308
311
301
304305
315
313
317
316
314
318
322
(HDC-SD9 P/PC/PL/GK)
319
HDC-SD9E/EG/EE/EF/EP/GC/SG
325(HDC-SD9 GC/SG)
321(HDC-SD9 GN)
320(HDC-SD9 EB/GC/SG)
326
(HDC-SD9D E/EG)
(HDC-SD9D EB)
306307