h.c.s.t electronics project synopsis format(2011-12)
DESCRIPTION
DETAILED PROJECT SYNOPSIS FORMAT FOR ENGINEERING STUDENTS WITH EXAMPLE GUIDELINETRANSCRIPT
HINDUSTAN COLLEGE OF SCIENCE & TECHNOLOGY,FARAH ,MATHURA(U.P.)
DEPARTMENT OFELECTRONICS & INSTRUMENTATION ENGINEERING
FINAL YEAR PROJECT(2011-12)Project synopsis
Table of Contents
Project title :................................................................................................................................................2Team details:...............................................................................................................................................2Aim / Objective............................................................................................................................................3Technologies used :.....................................................................................................................................3Technical details :…………………………………………………………………………………………………………………………………… 3Module Introduction (Principles Involved)..................................................................................................3Module Introduction (Process Discription)..................................................................................................3Module Introduction (Flowcharts)...............................................................................................................4Current status of project development.......................................................................................................4Target audience...........................................................................................................................................4Market potential and expected popularity..................................................................................................4References: …………………………………………………………………………………………………………………………………………… 4
HINDUSTAN COLLEGE OF SCIENCE & TECHNOLOGY,FARAH ,MATHURA(U.P.)
DEPARTMENT OFELECTRONICS & INSTRUMENTATION ENGINEERING
FINAL YEAR PROJECT(2011-12)Project synopsis
Sample for Project synopsis
Project title : The project title should be precise as well as meaning full.
Example: ELECTRONIC STETHOSCOPE USING ATMEL 89C51 WITH 7-SEGMENT DISPLAYTeam details:Team:(group no) Project leader Name: Team members:S.NO ROLL NO. NAME SECTION CONTACT NO. EMAIL I D1234
Total team strength: 4Total number of modules: 4
The team would be divided to work on each module. Each of the team members will play separate roles during the development of their modules. They would acts as leads, team members and QA person for different sections of the module. Once they code their modules they will be responsible as a team in performing integration with other modules developed in parallel by other teams. During this process they will be performing integration testing to make sure that all the modules get plugged in properly. After the integration is performed successfully the complete team as a whole would be responsible for deploying the project. At each step of deployment a regression testing phase will be undertaken to make sure that the functionality is working properly.
Aim / ObjectiveThe aim of the project must be clearly given by the project group in at least one paragraph about 60 wordsExample:Recognition of heart disease is an important goal in medicine. The majority of stethoscopes currently on the market are acoustic devices that use purely passive mechanical parts to isolate and focus sound generated by the body. Unfortunately, though these methods have been used for years, the simplicity of such devices is overshadowed by poor sound quality. These devices are also difficult to interface with modern technologies such as computers to record and analyze body sounds. The goal of this project is to design and construct an electronic stethoscope that is comparable in cost, has better acoustic response, and can interface with modern technologies better than the current acoustic stethoscope.
HINDUSTAN COLLEGE OF SCIENCE & TECHNOLOGY,FARAH ,MATHURA(U.P.)
DEPARTMENT OFELECTRONICS & INSTRUMENTATION ENGINEERING
FINAL YEAR PROJECT(2011-12)Project synopsis
Technologies used :The list of the technologies used in project should be listed clearly.
Example:This project will be using the following technology stack:
a) Embedded b) C#c) matlabd) digital networke) filter
Technical details
Module Introduction (Principles Involved)In this segment explain the basic principles involved in the project. Give the technical detail and list the principles.Example:The approach to this project is to keep things as simple as possible. The stethoscope system detecting heart sounds has two main blocks:
Signal Acquisition Pre-processing (Signal Conditioner) Analysis of heart sound.
It consists of two parts: Hardware Software.
The hardware component consists of a power supply, sensor, preamplifier, low pass filter and power amplifier.
Module Introduction (Process Discription)
The process of the whole software system proposed, to be developed, should be mentioned in brief. It should include the block diagram of the project
HINDUSTAN COLLEGE OF SCIENCE & TECHNOLOGY,FARAH ,MATHURA(U.P.)
DEPARTMENT OFELECTRONICS & INSTRUMENTATION ENGINEERING
FINAL YEAR PROJECT(2011-12)Project synopsis
Example:
The circuit will be operating on its own portable power source. The power source and circuitry will provide adequate voltage for the electronic components to function properly. There will be a sensor to convert the acoustic signal from the stethoscope into electrical signal. The signal will be pre-amplified using op-amps. A low pass filter will be designed to remove interference noise. Finally, the filtered signal will then be amplified again using power amplifiers.
Module Introduction (Flowcharts)
This blog application has a complete admin panel for performing administration. The main administration is done for user management
This may be supported by DFD's / Flowcharts to explain the flow of the informationExample:
HINDUSTAN COLLEGE OF SCIENCE & TECHNOLOGY,FARAH ,MATHURA(U.P.)
DEPARTMENT OFELECTRONICS & INSTRUMENTATION ENGINEERING
FINAL YEAR PROJECT(2011-12)Project synopsis
Description of flow chart1. Connect 9v power supply at input from battery.2. Connect headphone in the headphone jack.3. Put the headphone in ear.4. Put the diaphragm on heart for listening to heartbeat.5. As heartbeat comes from sensor to other unit LED glows accordingly with amplitude of
heartbeat.6. Push the start button, connected with microcontroller, microcontroller counts the number of
pulses and pulses are shown in the 7- Segment display.7. Record the pulses for carrying out treatment.
Current status of project developmentIt include the article /paper published in the field of project or some other work done in the field of the development of project
Target audienceTarget of the project should be clearly explainExample:Stethoscopes are medical instruments that help doctors detect sounds produced within the body, in particular heart and lungs, for monitoring the physiological condition of a patient. They typically include diaphragm detectors for picking-up sounds of lower frequency, and bell-shaped detectors for picking-up sounds of higher frequency.
Market potential and expected popularityProductivity of the project should be given under this segment.Example:The newest type of stethoscope that is now commonly used is an electronic version. This is very advantageous over a traditional stethoscope as it allows greater clarity of sound when listening to the heart and lungs. This makes identifying problems quicker and easier. Advanced electronic stethoscopes allow the recording and playback of sounds picked up, making it useful for reference or in the teaching of students.Reference:
List the book reference.List the e-reference.List the detail of the paper published in the field of project.Example:Book Reference
Medical Devices and Systems, Taylar & Francis, Third Edition, Chap. Bioelectric Impedance Measurement By Robert Patterson.
HINDUSTAN COLLEGE OF SCIENCE & TECHNOLOGY,FARAH ,MATHURA(U.P.)
DEPARTMENT OFELECTRONICS & INSTRUMENTATION ENGINEERING
FINAL YEAR PROJECT(2011-12)Project synopsis
E-Referenceo H. S. Fronek, “ Functional Testing for Venous Disease,” o http://www.phlebology.org/syllabus3.htm.o “Photoplethysmograph: The Volume Pulse,” http://www.shu.edu/depts/biology/
Published paper reference Luisada AA. The auditory system of man. In: Green WH, ed. The Sounds of the Normal Heart. St
Louis, Mo: Warren H. Green, Inc.;1972:23-25. Salinsky, M. 1990. Early Chapters in the Stethoscope's Evolution. JAMA. 264(21):2817.