hbxx-3817tb1-vtm

5
HBXX HBXX-3817TB1 3817TB1-VTM VTM Andrew® Twin Beam Capacity Antenna, 1710–2180 MHz, 2x 38° horizontal beamwidth, RET compatible l Enhances network capacity through six sectors site application with only three antenna faces l Single panel design supporting two separate beams perfectly optimized at horizontal pointing angles of +27 degrees and –27 degrees from boresite l Maximizes frequency spectrum utilization to increase Average Revenue Per User (ARPU) l Reduces antenna count to minimize CapEx and OpEx costs l High gain with excellent sector edge rolloff and azimuth sidelobe suppression l Each antenna downtilt can be independently adjusted for greater flexibility in network optimization l The values presented on this datasheet have been calculated based on NPBASTA White Paper version 9.6 by the NGMN Alliance Electrical Specifications Frequency Band, MHz 1710–1880 1850–1990 1920–2180 Gain by all Beam Tilts, average, dBi 18.9 19.1 19.3 Gain by all Beam Tilts Tolerance, dB ±0.4 ±0.4 ±0.6 Gain by Beam Tilt, average, dBi 0 ° | 18.7 5 ° | 19.0 10 ° | 18.9 0 ° | 18.9 5 ° | 19.2 10 ° | 19.1 0 ° | 19.3 5 ° | 19.5 10 ° | 19.0 Beam Centers, Horizontal, degrees ±27 ±27 ±27 Beamwidth, Horizontal, degrees 38 36 34 Beamwidth, Horizontal Tolerance, degrees ±1.5 ±1.3 ±2.2 Beamwidth, Vertical, degrees 7.5 7.1 6.7 Beamwidth, Vertical Tolerance, degrees ±0.4 ±0.3 ±0.5 Beam Tilt, degrees 0–10 0–10 0–10 Horizontal Sidelobe, dB 20 20 20 USLS, dB 20 20 21 Gain Rolloff at Boresite, dB 9 9 9 Gain Rolloff at Boresite Tolerance, dB ±2 ±2 ±2 FronttoBack Total Power at 180° ± 30°, dB 30 31 29 Isolation, dB 30 30 30 VSWR | Return Loss, dB 1.4 | 15.6 1.4 | 15.6 1.4 | 15.6 PIM, 3rd Order, 2 x 20 W, dBc 150 150 150 Input Power per Port, maximum, watts 250 250 250 Polarization ±45° ±45° ±45° Impedance 50 ohm 50 ohm 50 ohm Lightning Protection dc Ground dc Ground dc Ground General Specifications Antenna Brand Andrew® Antenna Type DualPol® twin beam Band Single band Brand DualPol® | Teletilt® Operating Frequency Band 1710 – 2180 MHz Product Specifications Product Specifications ©2013 CommScope, Inc. All rights reserved. All trademarks identified by 2013 CommScope, Inc. All rights reserved. All trademarks identified by ® ® or ™ are registered trademarks, respectively, of CommScope. or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: October 14, 2013 All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: October 14, 2013 Page 1 of 5 Page 1 of 5 October 17, 2013 October 17, 2013

Upload: nahuan-mata

Post on 25-Oct-2015

143 views

Category:

Documents


1 download

TRANSCRIPT

Page 1: HBXX-3817TB1-VTM

HBXXHBXX--3817TB13817TB1--VTMVTM Andrew® Twin Beam Capacity Antenna, 1710–2180 MHz, 2x 38° horizontal beamwidth, RET compatible  

l Enhances network capacity through six sectors site application with only three antenna faces  

l Single panel design supporting two separate beams perfectly optimized at horizontal pointing angles of +27 degrees and –27 degrees from boresite  

l Maximizes frequency spectrum utilization to increase Average Revenue Per User (ARPU)  

l Reduces antenna count to minimize Cap­Ex and Op­Ex costs  

l High gain with excellent sector edge roll­off and azimuth sidelobe suppression  

l Each antenna downtilt can be independently adjusted for greater flexibility in network optimization  

l The values presented on this datasheet have been calculated based on N­P­BASTA White Paper version 9.6 by the NGMN Alliance  

Electrical SpecificationsFrequency Band, MHz 1710–1880 1850–1990 1920–2180Gain by all Beam Tilts, average, dBi 18.9 19.1 19.3Gain by all Beam Tilts Tolerance, dB ±0.4 ±0.4 ±0.6

Gain by Beam Tilt, average, dBi0 ° | 18.7 

 5 ° | 19.0 

 10 ° | 18.9 

0 ° | 18.9 

 5 ° | 19.2 

 10 ° | 19.1 

0 ° | 19.3 

 5 ° | 19.5 

 10 ° | 19.0 

Beam Centers, Horizontal, degrees ±27 ±27 ±27Beamwidth, Horizontal, degrees 38 36 34Beamwidth, Horizontal Tolerance, degrees ±1.5 ±1.3 ±2.2Beamwidth, Vertical, degrees 7.5 7.1 6.7Beamwidth, Vertical Tolerance, degrees ±0.4 ±0.3 ±0.5Beam Tilt, degrees 0–10 0–10 0–10Horizontal Sidelobe, dB 20 20 20USLS, dB 20 20 21Gain Roll­off at Boresite, dB 9 9 9Gain Roll­off at Boresite Tolerance, dB ±2 ±2 ±2Front­to­Back Total Power at 180° ± 30°, dB 30 31 29Isolation, dB 30 30 30VSWR | Return Loss, dB 1.4 | 15.6 1.4 | 15.6 1.4 | 15.6

PIM, 3rd Order, 2 x 20 W, dBc ­150 ­150 ­150Input Power per Port, maximum, watts 250 250 250Polarization  ±45° ±45° ±45°Impedance  50 ohm 50 ohm 50 ohmLightning Protection  dc Ground dc Ground dc Ground

General Specifications Antenna Brand  Andrew® Antenna Type  DualPol® twin beam Band  Single band Brand  DualPol® | Teletilt® Operating Frequency Band  1710 – 2180 MHz  

Product SpecificationsProduct Specifications

©©2013 CommScope, Inc. All rights reserved. All trademarks identified by 2013 CommScope, Inc. All rights reserved. All trademarks identified by ® ® or ™ are registered trademarks, respectively, of CommScope.or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: October 14, 2013All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: October 14, 2013

Page 1 of 5Page 1 of 5October 17, 2013October 17, 2013

Page 2: HBXX-3817TB1-VTM

Mechanical Specifications Color  Light gray Connector Interface  7­16 DIN Female Connector Location  Bottom Connector Quantity, total  4 Lightning Protection  dc Ground Radiator Material  Low loss circuit board Radome Material  Fiberglass, UV resistant Wind Loading, maximum  438.0 N @ 150 km/h 

98.5 lbf @ 150 km/h Wind Speed, maximum  241.0 km/h | 149.8 mph  

Dimensions Depth  181.0 mm | 7.1 in Length  1390.0 mm | 54.7 in Width  301.0 mm | 11.9 in Net Weight  16.5 kg | 36.4 lb  

Remote Electrical Tilt (RET) Information Model with Factory Installed AISG 1.1 Actuator HBXX­3817TB1­R2M Model with Factory Installed AISG 2.0 Actuator HBXX­3817TB1­A2M RET System  Teletilt® 

Regulatory Compliance/CertificationsAgency ClassificationRoHS 2011/65/EU Compliant by ExemptionChina RoHS SJ/T 11364­2006 Above Maximum Concentration Value (MCV)ISO 9001:2008 Designed, manufactured and/or distributed under this quality management system

   

Included Products

DB380 — Pipe Mounting Kit for 2.4"­4.5" (60­115mm) OD round members on wide panel antennas. Includes 2 clamp sets and double nuts. 

DB5083 — Downtilt Mounting Kit for 2.4"­4.5" (60 ­ 115 mm) OD round members. Includes a heavy­duty, galvanized steel downtilt mounting bracket assembly and associated hardware. This kit is compatible with the DB380 pipe mount kit for panel antennas that are equipped with two mounting brackets. 

Product SpecificationsProduct SpecificationsHBXXHBXX--3817TB13817TB1--VTMVTM

©©2013 CommScope, Inc. All rights reserved. All trademarks identified by 2013 CommScope, Inc. All rights reserved. All trademarks identified by ® ® or ™ are registered trademarks, respectively, of CommScope.or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: October 14, 2013All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: October 14, 2013

Page 2 of 5Page 2 of 5October 17, 2013October 17, 2013

Page 3: HBXX-3817TB1-VTM

 

Horizontal Pattern Vertical Pattern

   

   

   

Product SpecificationsProduct SpecificationsHBXXHBXX--3817TB13817TB1--VTMVTM

©©2013 CommScope, Inc. All rights reserved. All trademarks identified by 2013 CommScope, Inc. All rights reserved. All trademarks identified by ® ® or ™ are registered trademarks, respectively, of CommScope.or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: October 14, 2013All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: October 14, 2013

Page 3 of 5Page 3 of 5October 17, 2013October 17, 2013

Page 4: HBXX-3817TB1-VTM

 

DB380DB380 Pipe Mounting Kit for 2.4"­4.5" (60­115mm) OD round members on wide panel antennas. Includes 2 clamp sets and double nuts.  

General Specifications Antenna Brand  Andrew® Mount Type  Pipe mounts Application  Outdoor Includes  Brackets | Hardware Package Quantity  2  

Mechanical Specifications Color  Silver Material Type  Galvanized steel  

Dimensions Compatible Diameter, maximum 114.3 mm | 4.5 in Compatible Diameter, minimum  61.0 mm | 2.4 in Net Weight  2.8 kg | 6.2 lb 

Regulatory Compliance/CertificationsAgency ClassificationRoHS 2011/65/EU CompliantChina RoHS SJ/T 11364­2006 Below Maximum Concentration Value (MCV)ISO 9001:2008 Designed, manufactured and/or distributed under this quality management system

   

Product SpecificationsProduct Specifications

©©2013 CommScope, Inc. All rights reserved. All trademarks identified by 2013 CommScope, Inc. All rights reserved. All trademarks identified by ® ® or ™ are registered trademarks, respectively, of CommScope.or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013

Page 4 of 5Page 4 of 5October 17, 2013October 17, 2013

Page 5: HBXX-3817TB1-VTM

 

DB5083DB5083 Downtilt Mounting Kit for 2.4"­4.5" (60 ­ 115 mm) OD round members. Includes a heavy­duty, galvanized steel downtilt mounting bracket assembly and associated hardware. This kit is compatible with the DB380 pipe mount kit for panel antennas that are equipped with two mounting brackets.  

General Specifications Antenna Brand  Andrew® Mount Type  Downtilt mounts Application  Outdoor Includes  Brackets | Hardware Package Quantity  1  

Mechanical Specifications Color  Silver Material Type  Galvanized steel  

Dimensions Compatible Diameter, maximum 114.3 mm | 4.5 in Compatible Diameter, minimum  61.0 mm | 2.4 in Net Weight  2.2 kg | 4.9 lb 

Regulatory Compliance/CertificationsAgency ClassificationRoHS 2011/65/EU Compliant by ExemptionChina RoHS SJ/T 11364­2006 Below Maximum Concentration Value (MCV)ISO 9001:2008 Designed, manufactured and/or distributed under this quality management system

   

Product SpecificationsProduct Specifications

©©2013 CommScope, Inc. All rights reserved. All trademarks identified by 2013 CommScope, Inc. All rights reserved. All trademarks identified by ® ® or ™ are registered trademarks, respectively, of CommScope.or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013

Page 5 of 5Page 5 of 5October 17, 2013October 17, 2013