hbm224n global logistics management unit outline s2 2 2010
TRANSCRIPT
-
8/8/2019 HBM224N Global Logistics Management Unit Outline S2 2 2010
1/14
Swinburne University of Technology, 2008Except as provided in the Copyright Act 1968, this document may not bereproduced in any form without the written permission of the University.
Faculty of Business & Enterprise
Higher Education Division
Unit of Study Outline
HBM224N
Global Logistics Management
Semester 2, 2010
Version date (6 August, 2010)
-
8/8/2019 HBM224N Global Logistics Management Unit Outline S2 2 2010
2/14
Page 2 of 14
Table of contents
Unit of Study Outline .................................................................................................. 3Teaching Staff ............................................................................................................ 3Aims 3Learning Objectives .................................................................................................... 3Content ...................................................................................................................... 3Key Generic Skills for this Unit of Study ..................................................................... 4 Learning and Teaching Structure ............................................................................... 4
Lecture Program _________________________________________________________ 4Tutorial Program _________________________________________________________ 5Tutorial Sessions _________________________________________________________ 6
Resources and Reference Material ............................................................................ 7Other References and the Library ____________________________________________ 7Unit website _____________________________________________________________ 7
Assessment................................................................................................................ 7a. Assessment Task Details: ________________________________________________ 7b. Participation Requirements _______________________________________________ 9c. Minimum Requirements to pass this Unit of Study: ____________________________ 9d. Assessment Criteria: ____________________________________________________ 9e. Submission of Assignments: ______________________________________________ 10f. Extensions and Late Submissions: _________________________________________ 10g. Assessment Results:____________________________________________________ 10h. Groupwork Guidelines: __________________________________________________ 10i. Email Communication ___________________________________________________ 10j. Plagiarism: ____________________________________________________________ 10k. Assessment and Appeals Policy and Procedure ______________________________ 11
Ethical Conduct at Swinburne .................................................................................. 11Blackboard Site for this Unit of Study ....................................................................... 12Student Feedback: ................................................................................................... 12
Safety Standards and Conduct Requirements: ......................................................... 12Special Needs .......................................................................................................... 13
-
8/8/2019 HBM224N Global Logistics Management Unit Outline S2 2 2010
3/14
Page 3 of 14
Unit of Study Outline
Unit of study code HBM224N
Unit of study name Global Logistics Management
Teaching Term/Semester & Year Semester 2, 2010
Contact Hours (hrs/wk) or total contacthours Lectures (2 hrs X 12 weeks) = 24 hoursTutorials (1 hr X 12 weeks) = 12 hours
Total contact hours = 36
Prerequisites Nil
Corequisites Nil
Credit Points 12.5
Teaching Staff
Name Role Campus &Room No.
PhoneNo.
Email Address ConsultationTimes
Mr. ChandanaHewege
Unit of StudyConvenor/Lecturer/Tutor
AGSE 337 92148842 [email protected] Appointmentthrough email
Mr. RickLaferriere
Lecturer / Tutor [email protected] Appointmentthrough email
Aims
This unit aims to provide students with the knowledge and skills to enable them to understand andapply the concept of logistics management and how it fits within overall global supply chainmanagement system. This unit will particularly focus on global logistics processes such as demandmanagement, order management, inventory management and transportation, and logisticperspective of the supply chain management.
Learning Objectives
After successfully completing this unit, you should be able to:
1. Describe the processes of logistics from a global supply chain managementperspective
2. Apply their knowledge of logistics intermediaries to effectively manage supply chains
3. Evaluate the advantages and disadvantages of the location of different facilities in aglobal context
4. Evaluate the tangible and intangible resources required for effective supply chaindecision making
5. Coordinate logistics activities across supply chains
6. Choose between different options for effectively delivering logistics services
7. Introduction to supply chain management and logistics
Content
Role of logistics in supply chain
Global dimensions of supply chain
Supply chain relationships
-
8/8/2019 HBM224N Global Logistics Management Unit Outline S2 2 2010
4/14
Page 4 of 14
Supply chain performance measurement and financial analysis
Supply chain technology- managing information flows
Demand management
Order management and customer service
Managing inventory in the supply chain
Transportation-managing the flow of the supply chain
Distribution-managing fulfilment operations
Supply net work analysis and design
Sourcing materials and services
Operations-producing goods and services
Managing reverse flows in the supply chain
Key Generic Skills for this Unit of Study
You will be provided with feedback on your progress in attaining the following generic skills:
teamwork skills,analysis skills,problem solving skills,communications skills,ability to tackle unfamiliar problems, andability to work independently
Learning and Teaching Structure
2 hours lectures and 1 hour tutorial per week.
In a Semester, you should normally expect to spend, on average, twelve and a half hours of totaltime (formal contact time plus independent study time) a week on a 12.5 credit point unit of study.
In a Term, you should normally expect to spend, on average, twenty five hours of total time (formalcontact time plus independent study time) a week on a 12.5 credit point unit of study.
Lecture Program
The following schedule is subject to change based on the scheduled class activities including fieldtrips:
Week Topics Readings (Coyle etal. Text)
1
(11/08/10)
Introduction to the unit & Supply chainmanagement: an overview
Chapter 1
2
(18/08/10)
Role of logistics in supply chains Chapter 2
3
(25/08/10)
Global dimensions of supply chains Chapter 3
-
8/8/2019 HBM224N Global Logistics Management Unit Outline S2 2 2010
5/14
Page 5 of 14
4
(01/09/10)
Supply chain relationships or
Supply chain performance measurement andfinancial analysis
Chapter 4 & 5
5
(08/09/10)
Supply chain technology managing informationflows
Chapter 6
6(15/09/10)
Demand managementOrder management and customer service
Chapter 7 & 8
BREAK
7
(29/09/10)
Field Trip to Global Standard One Chapters 9 & 10
8
(06/10/10)
Managing inventory in the supply chain
Transportation managing the flow of the supplychain
Chapters 11
9
(13/10/10)
Quiz 1
Distribution managing fulfilment operationsSupply chain network analysis and design
Chapter 11
10
(20/10/10)
Field Trip to Port of Melbourne Chapter 12, 13
11
(27/10/10)
Sourcing materials and services
Managing reverse flows in the supply chain
Review of Chapters 1-15
Chapter 15
12
(03/11/10)
Quiz 2
and Reflection
Tutorial Program
Week Tutorial Topic Case Study
(*Examplesand options)
Tutorial Reading(Coyle Text)
1
(11/08/10)Introduction to the unit. Assignment ofgroups
2(18/08/10)
Supply chain management: anoverview
Case 43:
Kimberley Clark
Chapter 1
3
(25/08/10)
Role of logistics in supply chains Case 42: Walmart
Case 1: Indias
logistical challenges
Case 6: 3PL Needs
Chapter 2
4
(01/09/10)
Global dimensions of supply chains Case #16 WyomoGrocery Buyers'Cooperation
Chapter 3
-
8/8/2019 HBM224N Global Logistics Management Unit Outline S2 2 2010
6/14
Page 6 of 14
Case #21 Let ThereBe Light LampShade Company
5
(08/09/10)
Supply chain relationships
Case Analysis due
Chapter 5 Reviewquestions
Chapter 4 &Discussion onField Trip/Report
6
(15/09/10)
Supply chain performancemeasurement and financial analysis
Case #25 AeroLogistics
Chapter 5
Break
7
(29/09/10)
Supply chain technology managinginformation flows
Tute replaced byfield trip
Chapter 6
8
(06/10/10)
Demand management
Order management and customerservice
Field Trip Reflection
Case 46: 7-11
Chapters 7 and 8
9(13/10/10)
Discussion on Midterm Quiz/TestManaging inventory in the supplychain
Final assignmentreview
Discussion onCompanies
Chapter 9
10
(20/10/10)
Transportation managing the flow ofthe supply chain
Distribution managing fulfilmentoperations
Tute replaced byfield trip
Chapters 10 & 11and
Major Assignment
11
(27/10/10)
Supply chain network analysis anddesign
Field Trip Reflection
Trans. Case (TBD)
Chapter 12
12
(03/11/10)
Sourcing materials and services
Managing reverse flows in the supplychain
Final Report Roundtable
All studentsexpected to come
prepared to providean informal overview
of their companylogistic case analysis
Chapters 13 and15
13
(10/11/10)
Report Due on 08/11/10
Tutorial SessionsPlease note that you are required to work in teams of maximum 3 for the Minor Assignment (15%weighting) and in the same team for the Major Assignment (25% weighting). Team membershipwill be arranged in your tutes. It is your responsibility to ensure that you are allocated a team.
Tutorials aim to revise and reinforce the key concepts from the lecture given in the previous class.They also provide you with the opportunity to clarify any issues arising from the lectures. To gainvalue from the tutorial discussion you must prepare the tutorial exercises before the tutorial.
NOTE: If all exercises are not covered in the tutorial session then it is your responsibility to ensurethat they are completed outside of class time.
To gain full benefit from this unit you are encouraged to attend and actively participate in tutorialactivity.
-
8/8/2019 HBM224N Global Logistics Management Unit Outline S2 2 2010
7/14
Page 7 of 14
Resources and Reference Material
You are expected to purchase the following from the bookshop:
Coyle, Langley, Gibson, Novack and Bardi (2009) Supply Chain Management, 8th Edition,
Cengage Learning Australia.
Other References and the Library
The Library has a large collection of resource materials, both texts and current journals. Listedbelow are some textbook references that will provide valuable supplementary information to thelectures. It is also recommended that you explore other sources to broaden your appreciation ofthe complexity of strategic marketing planning:
Additionally, several academic marketing journals are available in either electronic form viadatabases or in hard copy through the Swinburne Library.
Unit website
Each unit in the School of Business has a website which can be found atwww.mysubjects.swin.edu.au. To access your unit website, login to Blackboard using the your IDnumber as your login name and your date of birth (in dd/mm/yy format) as your password.
Assessment
a. Assessment Task Details:
Assessment Task Individual/Group Task
Related LearningObjective(s)
Weighting Due Date
1. Case Analysis Group (3members)
1, 2, 3 & 6 15% Week 5
2. LogisticsFinancials andMaths (Quiz 1)
Individual 1 15% Week 9
1. TheoreticalConcepts (Quiz 2
Individual 1 & 3 20% Week 12
2. Report on CriticalEvaluation ofLogistics systemsof a Company
Group 1,2,3,4,5 & 6 40% Week 13
3. Participation(Lecturers,tutorials and fieldtrip)
10% On going
Assessment 1: Case Analysis
Your tutor will assign your group a case at the beginning of the tutorial program. Each group should analysethe case and submit a word processed document in the form of an ESSAY to your tutor.
Some useful guidelines for case analysis:
Word limit (min 1500 2500 max)
Essay format (please refer communications skill handbook if you need assistance in this regard)
-
8/8/2019 HBM224N Global Logistics Management Unit Outline S2 2 2010
8/14
Page 8 of 14
Harvard-Swin reference style to be adhered to
Provide a brief summary of the case
Provide an analysis of core logistic strategy and practices on the firm in the context of the givenindustry
Outline key challenges, issues and problems
Analysis should be based on the key theoretical concepts related to logistics management
4. Students chose between the following three cases:
a. HP
b. Amazon
c. Port of Seattle
Assessments 2 & 3: In-class Quizzes
These are short-answer quizzes that will be administered during your lectures. The time allocated for a quizis one hour. Quiz 1: Mathematical problems and Quiz 2:. Literacy on logistics and supply chain management,
and concepts.
Assessment 4: Group Report
This major assignment requires you to write a report on critical evaluation of logistics systems of a chosencompany.
Some useful guidelines in this regard are:
Choose a logistic business after discussing with your team members (reaching a consensus amongthe team members is essential)
A business with global logistics operations is preferable
A critical evaluation of the chosen companys logistics operations should be performed. This involvesusing theoretical concepts that you have learned so far or are supposed to learn in the unit, toassess current logistics practices of the company.
Word limit of the report ( min 3000 max 5000)
Cutting and pasting web content without significant contribution from the team members will bepenalised.
It is required to seek your respective tutors approval for the chosen company
Report format is essential
You may decide an appropriate structure for the contents. A sample structure would be as follows:
o Executive summary
o Introduction
o Background of the company and industry
o A detailed description of the companys current logistics operations
o Critical analysis of key logistics aspects of the company ( hint: assess the strengths andweaknesses of each logistics aspect using theoretical concepts that you have learnt, as anideal scenario). A critical analysis means both positives and negatives. Identify keychallenges and issues faced by the company. Highlight best practices (if any).
o Discussion
o Recommendations and conclusions
o ReferencesIt is essential to use theoretical concepts to assess the actual logistics practices of the company.
-
8/8/2019 HBM224N Global Logistics Management Unit Outline S2 2 2010
9/14
Page 9 of 14
While it is not required to collect primary data from the company, use of multiple secondary datasources for data collection is mandatory. You may use, for instance, company publications,websites, media reports about the company, journal articles and industry newsletters
Assessment 5: Participation
This is based on
Lecture and tutorial participation
Degree of pre-preparation (readings and case study analysis)
Peer assessment of group work
Field trip and report
b. Participation Requirements
It is expected that students actively participate in lectures, tutorials and group work in order toachieve learning goals of this unit. In addition, each student is required to assess the level ofparticipation of other group members toward completing group assignments. A form called PeerEvaluation of Group Members Participation should be used for this purpose. Your tutor will
provide you with further details of this process in the class.
c. Minimum Requirements to pass this Unit of Study:
In order to achieve a pass in this unit a candidate must achieve a minimum of 50% in the finalexamination and submit all assignments.
d. Assessment Criteria:
While specific evaluation criteria for each assignment are listed in the appendix, the following is a descriptionof general grading criteria for assignments.
Grading Meaning
HD
High Distinction
85-100
Outstanding, insightful work. Goes beyond requirements of the task to develop aresponse, which is thoughtful, reflective, and considers alternative views and
makes connections among ideas and information from different sources or from
different aspects of the course. Well researched and documented. Displays
creativity and originality.
D
Distinction
75-84
Very good work. Purposefully and logically developed. Thoroughly addresses all
aspects of the task. Synthesis of details and concepts from various sources or
topics shows evidence of sound understanding and thoughtful examination.
Research information appropriately cited.
CCredit
65-74
Good work. Generally clear, accurate and relevant. Adequately addresses allrequirements of the task. Demonstrates understanding of course concepts, with
evidence of some thoughtful examination and reflection. Development is
generally logical, facts generally correct. Tends to focus on one interpretation.
P
Pass
50-64
Satisfactory work. Shows basic understanding of concepts with minimal evidence
of reflection or thoughtful analysis. Complies with the basic requirements, relies
on limited sources of information, little integration of concepts.
N
Not Pass
Below 50
Unsatisfactory work. Fails to address the topic in a meaningful way. May be
extremely brief, inaccurate, illogical or undeveloped.
CP 45-49 Conceded Pass
NA No assessment attempted
-
8/8/2019 HBM224N Global Logistics Management Unit Outline S2 2 2010
10/14
Page 10 of 14
WDFP Withdrawn/Fee payable
NLWD Not Pass/Late withdrawal
DEF Deferred result
e. Submission of Assignments:
Apart from in-class tests, all major assignments should be handed out to the tutor in class or asdirected by the tutor. A soft copy of the assignment should be submitted to the digital drop box ofthe Blackboard. It is also advised that a copy of the assignment is kept as record.
Before submitting the final assignment, it is essential that a DRFT version of the assignment istested for possible plagiarism by using SafeAssign facility of the Blackboard. Your tutor will adviseyou in this regard. Once you have finished your assignment, a digital copy of the final assignmentneeds to be submitted to SafeAssign.
f. Extensions and Late Submissions:
All assessment tasks should be submitted on the required day. Extensions are not normallygranted but in exceptional circumstances or where there is genuine hardship, a limited extensionmay be granted by the unit convenor. Any applications should be made in writing to the convenorat least 48 hours prior to the due date and where appropriate documentary evidence such as adoctors certificate should be attached. Where an assignment is submitted after the specifieddeadline, the assignment mark will be penalised at the rate of 10% per day or part thereof. If lateassignments are received after marked assignments have been returned, the late assignments willnot be awarded any marks.
g. Assessment Results:
Assessment results will be available via Grade Centre on Blackboard, together with feedbackassoon as teaching staff completes marking.
Students must retain all assessed material that contributes to the final result up until such time asthe final results are published.
h. Groupwork Guidelines:
A group project is the collective responsibility of the entire group, and if one member is temporarilyunable to contribute, the group should be able to reallocate responsibilities to keep to schedule. Inthe event of longer-term illness or other serious problems involving a member of a project group, itis the responsibility of the other members to make the project supervisor aware of the situation
straight away.
Group project reports must be submitted with the project cover sheet, signed by all members of thegroup. All group members must be satisfied that the work has been correctly submitted. Anypenalties for late submission will apply to all group members, not just the person who submitted.
(Please refer to b above for details on assessing member participation in group work).
i. Email Communication
For privacy and reliability reasons SUT will only communicate with you via your official Swinburneemail account. It is your responsibility to check this account regularly for important officialcommunication.
j. Plagiarism:Swinburne University of Technology defines Plagiarism as the action or practice of taking andsubmitting or presenting the thoughts, writings or other work of someone else as though it is your
-
8/8/2019 HBM224N Global Logistics Management Unit Outline S2 2 2010
11/14
Page 11 of 14
own work. Plagiarism includes any of the following, without full and appropriate acknowledgment tothe original source(s):
(i) The use of the whole or part of a computer program written by another person;
(ii) the use, in essays or other assessable work, of the whole or part of a written work from anysource including but not limited to a book, journal, newspaper article, set of lecture notes,current or past students work, any other persons work, a website or database;
(iii) the paraphrasing of anothers work;
(iv) the use of musical composition, audio, visual, graphic and photographic models,
(v) The use of realia, that is objects, artefacts, costumes, models and the like.
Plagiarism also includes the preparation or production and submission or presentation ofassignments or other work in conjunction with another person or other people when that workshould be your own independent work. This remains plagiarism whether or not it is with theknowledge or consent of the other person or people. It should be noted that Swinburne encouragesits students to talk to staff, fellow students and other people who may be able to contribute to astudents academic work but that where independent assignment is required, submitted orpresented work must be the students own.
Enabling plagiarism contributes to plagiarism and therefore will be treated as a form of plagiarismby the University. Enabling plagiarism means allowing or otherwise assisting another student tocopy or otherwise plagiarise work by, for example, allowing access to a draft or completedassignment or other work.
k. Assessment and Appeals Policy and Procedure
The information outlined in the Assessment sections above is covered in more detail inSwinburnes Assessment and Appeals Policy and Procedure. Students must be familiar with thePolicy and Procedure, found athttp://www.swinburne.edu.au/corporate/registrar/ppd/docs/AssessmentandAppealsHigherEducation.pdf
The Policy and Procedure provides details about:
Assessment issues such as the conduct of examinations, plagiarism policies and detailsexplaining how to apply for a review of results and other appeals, and
Student progress issues such as unsatisfactory academic progress and early interventionprocedures, and
Information for students with disabilities and special needs and procedures for applying forspecial consideration.
Students should make themselves familiar with all aspects of the Policy and Procedure, as failureto do so is not grounds for appeal.
Students are advised to seek advice from the staff at the Swinburne Student Amenities AssociationSSAA (http://www.swinburne.edu.au/ssaa/) if they require assistance with advocacy for Sections 12(At-Risk and Progress Review) and 13 (Appeals) of the Policy and Procedure.
Ethical Conduct at Swinburne
During your studies you may carry out research projects or case studies where you will discussbusiness issues with personnel or customers of organisations. Any research activities relating toassignments should be under academic supervision. Your unit convenor is required to fully informyou of what and how you may be required to research.
Your activities as a Swinburne member (staff or student) are expected to be in accord with theCode of Conduct. The code is available at:http://ppd.swinburne.edu.au/humres/CodeOfConduct.htm
If you are conducting research you must also be familiar with the Universitys Ethics Policy(available athttp://www.swinburne.edu.au/research/ethics/). You may not contact any organisationor person until you have agreed to abide by these policies.
http://www.swinburne.edu.au/corporate/registrar/ppd/docs/AssessmentandAppealsHigherEducation.pdfhttp://www.swinburne.edu.au/corporate/registrar/ppd/docs/AssessmentandAppealsHigherEducation.pdfhttp://www.swinburne.edu.au/corporate/registrar/ppd/docs/AssessmentandAppealsHigherEducation.pdfhttp://www.swinburne.edu.au/ssaa/http://www.swinburne.edu.au/ssaa/http://ppd.swinburne.edu.au/humres/CodeOfConduct.htmhttp://ppd.swinburne.edu.au/humres/CodeOfConduct.htmhttp://www.swinburne.edu.au/research/ethics/http://www.swinburne.edu.au/research/ethics/http://www.swinburne.edu.au/research/ethics/http://www.swinburne.edu.au/research/ethics/http://ppd.swinburne.edu.au/humres/CodeOfConduct.htmhttp://www.swinburne.edu.au/ssaa/http://www.swinburne.edu.au/corporate/registrar/ppd/docs/AssessmentandAppealsHigherEducation.pdfhttp://www.swinburne.edu.au/corporate/registrar/ppd/docs/AssessmentandAppealsHigherEducation.pdf -
8/8/2019 HBM224N Global Logistics Management Unit Outline S2 2 2010
12/14
Page 12 of 14
You should be grateful for the goodwill granted to you by individuals and organisations who agreeto assist you and you are required to behave in a professional and ethical manner at all times. Atno time are you to divulge confidential information of any organisation (including your employer) inany assignment or report without the written permission of the organisation.
Students collecting information for assignments and reports must disclose:
That you are a student of Swinburne University of TechnologyInformation on the assignment or report to the contactYour employment status and who your employer is, if employed
Any potential conflict of interest
Under no circumstances are you to use any form of misrepresentation or unethical practices toobtain information. If you are unsure whether your data collection falls within the universitys EthicsGuidelines, contact your Unit Convenor.
Blackboard Site for this Unit of Study
Important information concerning this unit of study is placed on the Swinburne course management
system (Blackboard), accessible via http://blackboard.swinburne.edu.au/It is your responsibility to access on a regular basis
the Blackboard site for your unit of study,the Announcements section on Blackboard, andany emails sent by the teaching staff to your student email address via Blackboard.If you access your email through a provider other than Swinburne, it is your responsibility toensure that your Swinburne email is redirected to your private email address. To redirect yourSwinburne email, go to https://www.swin.edu.au/chdets/login.phpType in your ID number and your password. Note your ID number is the first six numbers ofyour student ID and your password is initially set to your date of birth in the format DDMMYYUnder 'Email forwarding' enter the email address to which you would like your Swinburneemails to be forwarded.Now click 'Change'
Student Feedback:
Swinburne seeks student feedback in a number of ways, including through periodic StudentFeedback on Units and Student Feedback on Teaching surveys, as part of the universitysapproach to quality assurance and improvement. Possible improvement based on both studentand staff feedback is considered by Unit Convenors, Unit Panels made up of relevant teachingstaff, Program Panels, Faculty Academic Committees, and the Academic Programs QualityCommittee, as appropriate.
Safety Standards and Conduct Requirements:
The University executes safety drills without warning. Be prepared to follow instructions from staffand/or wardens to evacuate the building in a safe and orderly manner.
All students are expected to respect the rights and sensibilities of their fellow students andteaching staff. This also applies in respect of the content of video and audio work submitted forassessment. The University has rigorous anti-discrimination and harassment policies andprocedures. http://ppd.swinburne.edu.au/humres/AntiDiscrimination.htm
Safety procedures in laboratories must be followed. Open-toed shoes are not permitted in certainlaboratories. Drink or food is not permitted in teaching spaces. The supervisor is authorised toexclude students for dangerous or disruptive behaviour which would result in forfeiture of all marksfor the laboratory activity. The playing of computer games is not allowed in the computer labs.
https://www.swin.edu.au/chdets/login.phphttp://ppd.swinburne.edu.au/humres/AntiDiscrimination.htmhttp://ppd.swinburne.edu.au/humres/AntiDiscrimination.htmhttps://www.swin.edu.au/chdets/login.php -
8/8/2019 HBM224N Global Logistics Management Unit Outline S2 2 2010
13/14
Page 13 of 14
Special Needs
If you have special needs you should advise your Faculty and the Unit of Study Convenor by theend of the second week of the teaching period. In addition, you are recommended to notify theEquity Office if you have not already done so.
See also the Students with Disabilities and Special Needs Section of the Assessment andAppeals Policy & Procedure, at
http://www.swinburne.edu.au/corporate/registrar/ppd/docs/AssessmentandAppealsHigherEducation.pdf
http://www.swinburne.edu.au/corporate/registrar/ppd/docs/AssessmentandAppealsHigherEducation.pdfhttp://www.swinburne.edu.au/corporate/registrar/ppd/docs/AssessmentandAppealsHigherEducation.pdfhttp://www.swinburne.edu.au/corporate/registrar/ppd/docs/AssessmentandAppealsHigherEducation.pdfhttp://www.swinburne.edu.au/corporate/registrar/ppd/docs/AssessmentandAppealsHigherEducation.pdfhttp://www.swinburne.edu.au/corporate/registrar/ppd/docs/AssessmentandAppealsHigherEducation.pdf -
8/8/2019 HBM224N Global Logistics Management Unit Outline S2 2 2010
14/14
Peer Evaluation of Team Work \ Group Behaviour: Group Assignments
Your Name:-----------------------------------------------------------------------------------
Your Student Id:-----------------------------------------------------------------------------
Subject: --------------------------------------------------------------------------------------Assignment Type:---------------------------------------------------------------------------
Names of Group Members (excluding you):
1. ------------------------------------------------
2. ------------------------------------------------
3. ------------------------------------------------
4. ------------------------------------------------
Rate your Team members against the criteria given below using a rating scale ranging from 0 to 10
(e.g. 0 for no contribution and 10 for superb/extraordinary contribution)
Criteria Name of theMember
Name of theMember
Name of theMember
Name of theMember
Name of theMember
Available for discussions
Ability to frequently contact
including over the phone andemail
Degree of seriousness showntoward the assignment
Sense of responsibility
Caring for Team members
Timely completion of work
Commitment to Quality
Helping other team members
Total
Your Signature: ............................................. Date:.....................................................