hartmetall- drehmeißel - wilke-tools.de 1109.pdf · 3 drehmeißel mit hm-schneidplatte brazed...
TRANSCRIPT
Hartmetall-Drehmeißel
PreislistePricelist
Liste de Prix
HM-Drehmeißel nach DIN und WN | HM-Lötplatten | BohrstahlhülsenCarbide brazing turning tools | Carbide brazing tips | Holders for round turning toolsOutils de tour brasées carbure | Plaquettes carbure | Porte-outils pour outils de tour
www.wilke-tools.de
Inhalt Table of contents • Sommaire
SeitePage
DIN 4971 - ISO 1 - NF 301 Gerade Drehmeißel Straight turning tool Outil à charioter droit 3
DIN 4972 - ISO 2 - NF 302 Gebogene Drehmeißel Bent turning tool Outil à charioter coudé 3
DIN 4973 - ISO 8 - NF 308 Innen-Drehmeißel Internal turning tool Outil à aléser débouchant 3
DIN 4974 - ISO 9 - NF 309 Innen-Eck-Drehmeißel Internal corner turning tool Outil à aléser fond plat 4
DIN 4975 - ISO 10 - NF 351 Spitze Drehmeißel Pointed straight turning tool Outil de finition droit 4
DIN 4976 - ISO 4 - NF 304 Breite Drehmeißel Square nose turning tool Outil pelle 4
DIN 4977 - ISO 5 - NF 305 Abgesetzte Stirn-Drehmeißel Offset cutting tool Outil à dresser les faces 5
DIN 4978 - ISO 3 - NF 303 Abgesetzte Eck-Drehmeißel Offset corner cutting tool Outil à finir d‘angle 5
DIN 4980 - ISO 6 - NF 306 Abgesetzte Seiten-Drehmeißel Offset side cutting tool Couteau revageur 5
DIN 4981 - ISO 7 - NF 307 Stech-Drehmeißel Grooving tool Outil à gorge d‘extérieur 6
WN 282 - ISO 12 - NF 352 Außengewinde-Drehmeißel External threading tool Outil à fileter d‘extérieur 6
WN 283 - ISO 13 - NF 353 Innengewinde-Drehmeißel Internal thread turning tool Outil à fileter d‘intérieur 6
WN 263 - ISO 11 - NF 354 Haken-Drehmeißel Recessing tool Outil de tour à chambrer 7
WN 220 Drehmeißel für Keilriemenprofile Turning tool for V-belt profiles Outil de tour pour gorgesde courroies trapézoïdales 7
WN 235 Gerade Rundnasen Drehmeißel Straight round-nose tool Outil de tour rayonné droit 7
WN 240 Gebogene Rundnasen Drehmeißel Bent round-nose tool Outil de tour rayonné coudé 7
WN 245 Schrupp-Hobelmeißel 60º Jack planing tool 60º Outil de rabotage ébauche 60º 8
WN 250 Schrupp-Hobelmeißel 45º Jack planing tool 45º Outil de rabotage ébauche 45º 8
WN 255 Kopf-Hobelmeißel Face planing tool Outil de rabotage, pelle 8
WN 260 Breitschlicht-Hobelmeißel Broad finishing tool Outil rabot de finition 8
WN 265 Spitz-Hobelmeißel Point planing tool Outil de rabotage pointu 8
WN 270 Gebogene Seiten-Hobelmeißel Bent side jack planing tool Outil de rabotage latéral coudé 9
WN 372 Automaten-Drehmeißel Turning tool for automatics Burin de tournage 9
WN 374 Automaten-Stech-Drehmeißel Cutt-off tool for automatics Burin à tronçonner 9
WN BO Drehmeißel-Halter mit Bohrung Toolholder Porte-outil 9
DIN 4950 HM-Lötplatten Carbide brazing tips Plaquettes carbure 10
DIN 4966 HM-Lötplatten Carbide brazing tips Plaquettes carbure 11
Alle Preisangaben gelten in € pro Stück • All prices in € per piece • Tout les prix en € / pièce
Alle vorangegangen Preislisten verlieren hiermit Ihre Gültigkeit • All other price list are invalid • Tous les tarifs antérieurs deviennent caducs. Grundlage unserer Geschäftsbeziehungen sind ausschließlich unsere Allgemeinen Geschäftsbedingungen. Abrufbar sind diese unter www.wilke-tools.de sowohl in deutscher als auch in englischer Sprache. • All transactions are based on our trading conditions you can download at: www.wilke-tools.de • Toutes nos transactions commerciales sont uniquement régies par nos conditions générales. Vous pouvez les télécharger sous www.wilke-tools.de en allemand et en anglais. (11/09)
3
Drehmeißel mit HM-SchneidplatteBrazed turning tools • Outils de tour carbure
Gerade Drehmeißel DIN 4971 - ISO 1 - NF 301Straight turning tool • Outil à charioter droit
RH à droite
LH à gauche
R L
Andere Abmessungen und Ausführungen auf Anfrage.
Other dimensions and special styles on demand.
Autres dimensions et formes spéciaux sur demande.
Andere Abmessungen und Ausführungen auf Anfrage.
Other dimensions and special styles on demand.
Autres dimensions et formes spéciaux sur demande.
ACHTUNG!ATTENTION!
Linksausführung ist SONDERLH is SPECIALÀ gauche est SPÉCIAL
Andere Abmessungen und Ausführungen auf Anfrage.
Other dimensions and special styles on demand.
Autres dimensions et formes spéciaux sur demande.
Gebogene Drehmeißel DIN 4972 - ISO 2 - NF 302Bent turning tool • Outil à charioter coudé R L
RH à droite
LH à gauche
Innen-Drehmeißel DIN 4973 - ISO 8 - NF 308Internal turning tool • Outil à aléser débouchant
RH à droite
R
Abmessungen Dimensions
StückPcs / Pièce
LötplatteTip / Plaquette
Grundpreise per Stück für HM-QualitätenBasic prices / prix de base H.T. (Euro € )
Rabatt-GruppeDiscount grp. / Remise grp.
R / RH L / LH K10/20, P20, P25/30 M10/20, P10, P40 K01, K05, M30 | SONDER, SPECIAL
12
6 x 6 x 80
5
AB 05 7,00 7,80 31,00
8 x 8 x 80 AB 06 7,00 7,80 31,00
10 x 10 x 90 AB 08 5,40 6,00 27,70
12 x 12 x 100 A10 B10 6,30 7,00 34,60
16 x 16 x 110 A12 B12 7,30 8,10 37,00
20 x 20 x 125 A16 B16 9,40 10,40 40,10
25 x 25 x 140 3 A20 B20 15,20 16,80 57,10
32 x 32 x 1701
A25 B25 22,80 25,10 77,60
40 x 40 x 200 A32 B32 41,10 45,30 220,90
20 x 12 x 125 5 A12 B12 9,60 10,60
Auf Anfrage On request / Sur demande
25 x 16 x 140 3 A16 B16 14,60 16,10
32 x 20 x 1701
A20 B20 21,50 23,70
40 x 25 x 200 A25 B25 27,40 30,20
Abmessungen Dimensions
StückPcs / Pièce
LötplatteTip / Plaquette
Grundpreise per Stück für HM-QualitätenBasic prices / prix de base H.T. (Euro € )
Rabatt-GruppeDiscount grp. / Remise grp.
R / RH L / LH K10/20, P20, P25/30 M10/20, P10, P40 K01, K05, M30 | SONDER, SPECIAL
12
8 x 8 x 80
5
C 06 6,00 6,60 30,50
10 x 10 x 90 C 08 5,70 6,30 28,90
12 x 12 x 100 C 10 6,60 7,30 35,10
16 x 16 x 110 C 12 7,60 8,40 39,00
20 x 20 x 125 C 16 9,70 10,70 41,10
25 x 25 x 140 3 C 20 15,30 16,90 57,80
32 x 32 x 170
1
C 25 22,90 25,20 78,60
40 x 40 x 200 C 32 41,50 45,70 122,90
50 x 50 x 240 C 40 140,00 154,00 226,10
20 x 12 x 125 5 C 10 9,00 9,90 39,00
25 x 16 x 140 3 C 12 15,00 16,50 41,80
32 x 20 x 1701
C 16 20,00 22,00 58,50
40 x 25 x 200 C 20 32,00 35,20 82,20
Abmessungen Dimensions
StückPcs / Pièce
LötplatteTip / Plaquette
Grundpreise per Stück für HM-QualitätenBasic prices / prix de base H.T. (Euro € )
Rabatt-GruppeDiscount grp. / Remise grp.
R / RH L / LH K10/20, P20, P25/30 M10/20, P10, P40 K01, K05, M30 | SONDER, SPECIAL
12
6 x 6 x 100 5 AB 05 6,00 6,60 28,50
8 x 8 x 125
5
AB 05 5,60 6,20 27,40
10 x 10 x 125 AB 06 6,20 6,90 29,60
12 x 12 x 180 A10 B12 7,70 8,50 33,20
16 x 16 x 210 A10 B10 9,40 10,40 39,00
20 x 20 x 250 A12 B12 11,40 12,60 45,70
25 x 25 x 300 3 A16 B16 17,60 19,40 59,40
32 x 32 x 3551
A20 B20 26,40 29,10 85,40
40 x 40 x 400 A25 B25 44,00 48,50 198,00
Ø 8 x 125
5
AB 05 5,60 6,20 26,30
Ø 10 x 150 AB 06 5,90 6,50 28,50
Ø 12 x 180 AB 08 7,40 8,20 32,00
Ø 16 x 210 A10 B10 9,30 10,30 37,90
Ø 20 x 250 A12 B12 10,60 11,70 44,60
Ø 25 x 300 3 A16 B16 16,60 18,30 58,30
Ø 32 x 355 1 A20 B20 25,60 28,20 84,30
Ø 6 x 100 5 AB 05 6,00 6,60 28,50
4
Drehmeißel mit HM-SchneidplatteBrazed turning tools • Outils de tour carbure
Spitze Drehmeißel DIN 4975 - ISO 10 - NF 351Pointed straight turning tool • Outil de finition droitGerade
Andere Abmessungen und Ausführungen auf Anfrage.
Other dimensions and special styles on demand.
Autres dimensions et formes spéci-aux sur demande.
Andere Abmessungen und Ausführungen auf Anfrage.
Other dimensions and special styles on demand.
Autres dimensions et formes spéci-aux sur demande.
straight droit
Breite Drehmeißel DIN 4976 - ISO 4 - NF 304Square nose turning tool • Outil pelleGerade
straight droit
R
Innen-Eck-Drehmeißel DIN 4974 - ISO 9 - NF 309Internal corner turning tool • Outil à aléser fond plat
ACHTUNG!ATTENTION!
Linksausführung ist SONDERLH is SPECIAL
À gauche est SPÉCIAL
Andere Abmessungen und Ausführungen auf Anfrage.
Other dimensions and special styles on demand.
Autres dimensions et formes spéciaux sur demande.
RH à droite
Abmessungen Dimensions
StückPcs / Pièce
LötplatteTip / Plaquette
Grundpreise per Stück für HM-QualitätenBasic prices / prix de base H.T. (Euro € )
Rabatt-GruppeDiscount grp. / Remise grp.
R / RH L / LH K10/20, P20, P25/30 M10/20, P10, P40 K01, K05, M30 | SONDER, SPECIAL
12
6 x 6 x 100
5
AB 05 6,00 6,60 27,00
8 x 8 x 125 AB 05 5,60 6,20 27,40
10 x 10 x 150 AB 06 5,90 6,90 29,60
12 x 12 x 180 A10 B12 7,70 8,50 33,20
16 x 16 x 210 A10 B10 9,40 10,40 39,00
20 x 20 x 250 A12 B12 11,40 12,60 45,70
25 x 25 x 300 3 A16 B16 17,60 19,40 59,40
32 x 32 x 355 1 A20 B20 26,40 29,10 85,40
40 x 40 x 400
5
A25 B25 60,00 66,00 250,00
Ø 6 x 100 AB 05 6,00 6,60 27,00
Ø 8 x 125 AB 05 5,60 6,20 26,30
Ø 10 x 150 AB 06 5,90 6,50 28,50
Ø 12 x 180 AB 08 7,40 8,20 32,00
Ø 16 x 210 A10 B10 9,30 10,30 37,90
Ø 20 x 250 A12 B12 10,60 11,70 44,60
Ø 25 x 300 3 A16 B16 16,60 18,30 58,30
Ø 32 x 355 1 A20 B20 25,60 28,20 84,30
Ø 40 x 400 5 A25 B25 91,00 100,00 300,00
Abmessungen Dimensions
StückPcs / Pièce
LötplatteTip / Plaquette
Grundpreise per Stück für HM-QualitätenBasic prices / prix de base H.T. (Euro € )
Rabatt-GruppeDiscount grp. / Remise grp.
R / RH L / LH K10/20, P20, P25/30 M10/20, P10, P40 K01, K05, M30 | SONDER, SPECIAL
12
8 x 8 x 80
5
C 08 7,10 7,80 23,00
10 x 10 x 90 C 10 6,00 6,60 29,70
12 x 12 x 100 C 12 7,80 8,60 34,80
16 x 16 x 110 C 16 9,30 10,30 39,60
20 x 20 x 125 C 20 12,60 13,90 51,30
25 x 25 x 140 3 C 25 21,90 24,10 75,10
32 x 32 x 1701
C 32 37,60 41,40 122,70
40 x 40 x 200 C 40 70,50 77,60 194,20
12 x 8 x 100
5
C 08 7,10 7,80 23,00
16 x 10 x 110 C 10 7,50 8,30 32,60
20 x 12 x 125 C 12 8,00 8,80 35,30
25 x 16 x 140 3 C 16 11,60 12,80 44,30
32 x 20 x 170
1
C 20 17,10 18,90 60,20
40 x 25 x 200 C 25 27,80 30,60 83,90
50 x 32 x 240 C 32 300,00 330,00 500,00
Abmessungen Dimensions
StückPcs / Pièce
LötplatteTip / Plaquette
Grundpreise per Stück für HM-QualitätenBasic prices / prix de base H.T. (Euro € )
Rabatt-GruppeDiscount grp. / Remise grp.
R / RH L / LH K10/20, P20, P25/30 M10/20, P10, P40 K01, K05, M30 | SONDER, SPECIAL
12
16 x 10 x 1105
E 05 6,50 7,20 28,00
20 x 12 x 125 E 06 7,10 7,90 31,30
25 x 16 x 140 3 E 06 9,60 10,60 36,00
32 x 20 x 1701
E 08 12,60 13,90 45,10
40 x 25 x 200 21,30 23,50 63,70
8 x 8 x 80 5 E 04 6,50 7,20 28,00
10 x 10 x 90
5
E 04 5,90 6,50 27,80
12 x 12 x 100 E 05 7,30 8,10 29,00
16 x 16 x 110 E 06 8,90 9,80 32,70
20 x 20 x 125 E 08 12,00 13,20 37,20
25 x 25 x 140 3 E 10 20,20 22,30 45,70
32 x 32 x 170 5 E 12 40,00 45,00 120,50
5
Drehmeißel mit HM-SchneidplatteBrazed turning tools • Outils de tour carbure
Abgesetzte Stirn-Drehmeißel DIN 4977 - ISO 5 - NF 305Offset cutting tool • Outil à dresser les faces R L
Andere Abmessungen und Ausführungen auf Anfrage.
Other dimensions and special styles on demand.
Autres dimensions et formes spéciaux sur demande.
Andere Abmessungen und Ausführungen auf Anfrage.
Other dimensions and special styles on demand.
Autres dimensions et formes spéciaux sur demande.
Andere Abmessungen und Ausführungen auf Anfrage.
Other dimensions and special styles on demand.
Autres dimensions et formes spéciaux sur demande.
RH à droite
LH à gauche
Abgesetzte Eck-Drehmeißel DIN 4978 - ISO 3 - NF 303Offset corner cutting tool • Outil à finir d‘angle R L
RH à droite
LH à gauche
Abgesetzte Seiten-Drehmeißel DIN 4980 - ISO 6 - NF 306Offset side cutting tool • Couteau revageur R L
RH à droite
LH à gauche
Abmessungen Dimensions
StückPcs / Pièce
LötplatteTip / Plaquette
Grundpreise per Stück für HM-QualitätenBasic prices / prix de base H.T. (Euro € )
Rabatt-GruppeDiscount grp. / Remise grp.
R / RH L / LH K10/20, P20, P25/30 M10/20, P10, P40 K01, K05, M30 | SONDER, SPECIAL
12
6 x 6 x 100
5
AB 05 6,00 6,60 27,00
8 x 8 x 125 AB 05 5,60 6,20 27,40
10 x 10 x 150 AB 06 5,90 6,90 29,60
12 x 12 x 180 A10 B12 7,70 8,50 33,20
16 x 16 x 210 A10 B10 9,40 10,40 39,00
20 x 20 x 250 A12 B12 11,40 12,60 45,70
25 x 25 x 300 3 A16 B16 17,60 19,40 59,40
32 x 32 x 355 1 A20 B20 26,40 29,10 85,40
40 x 40 x 400
5
A25 B25 60,00 66,00 250,00
Ø 6 x 100 AB 05 6,00 6,60 27,00
Ø 8 x 125 AB 05 5,60 6,20 26,30
Ø 10 x 150 AB 06 5,90 6,50 28,50
Ø 12 x 180 AB 08 7,40 8,20 32,00
Ø 16 x 210 A10 B10 9,30 10,30 37,90
Ø 20 x 250 A12 B12 10,60 11,70 44,60
Ø 25 x 300 3 A16 B16 16,60 18,30 58,30
Ø 32 x 355 1 A20 B20 25,60 28,20 84,30
Ø 40 x 400 5 A25 B25 91,00 100,00 300,00
Abmessungen Dimensions
StückPcs / Pièce
LötplatteTip / Plaquette
Grundpreise per Stück für HM-QualitätenBasic prices / prix de base H.T. (Euro € )
Rabatt-GruppeDiscount grp. / Remise grp.
R / RH L / LH K10/20, P20, P25/30 M10/20, P10, P40 K01, K05, M30 | SONDER, SPECIAL
12
8 x 8 x 80
5
C 08 7,10 7,80 23,00
10 x 10 x 90 C 10 6,00 6,60 29,70
12 x 12 x 100 C 12 7,80 8,60 34,80
16 x 16 x 110 C 16 9,30 10,30 39,60
20 x 20 x 125 C 20 12,60 13,90 51,30
25 x 25 x 140 3 C 25 21,90 24,10 75,10
32 x 32 x 1701
C 32 37,60 41,40 122,70
40 x 40 x 200 C 40 70,50 77,60 194,20
12 x 8 x 100
5
C 08 7,10 7,80 23,00
16 x 10 x 110 C 10 7,50 8,30 32,60
20 x 12 x 125 C 12 8,00 8,80 35,30
25 x 16 x 140 3 C 16 11,60 12,80 44,30
32 x 20 x 170
1
C 20 17,10 18,90 60,20
40 x 25 x 200 C 25 27,80 30,60 83,90
50 x 32 x 240 C 32 300,00 330,00 500,00
Abmessungen Dimensions
StückPcs / Pièce
LötplatteTip / Plaquette
Grundpreise per Stück für HM-QualitätenBasic prices / prix de base H.T. (Euro € )
Rabatt-GruppeDiscount grp. / Remise grp.
R / RH L / LH K10/20, P20, P25/30 M10/20, P10, P40 K01, K05, M30 | SONDER, SPECIAL
12
8 x 8 x 80
5
AB 06 6,50 7,10 30,00
10 x 10 x 90 AB 08 6,20 6,90 28,90
12 x 12 x 100 B10 A10 7,10 7,90 35,10
16 x 16 x 110 B12 A12 7,80 8,60 39,00
20 x 20 x 125 B16 A16 10,00 11,00 41,10
25 x 25 x 140 3 B20 A20 15,40 17,00 57,80
32 x 32 x 170
1
B25 A25 23,50 25,90 78,60
40 x 40 x 200 B32 A32 48,50 53,40 122,90
50 x 50 x 240 B40 A40 110,00 120,00 226,10
20 x 12 x 125
5
B12 A12
25 x 16 x 140 B16 A16
32 x 20 x 170 B20 A20
Abmessungen Dimensions
StückPcs / Pièce
LötplatteTip / Plaquette
Grundpreise per Stück für HM-QualitätenBasic prices / prix de base H.T. (Euro € )
Rabatt-GruppeDiscount grp. / Remise grp.
R / RH L / LH K10/20, P20, P25/30 M10/20, P10, P40 K01, K05, M30 | SONDER, SPECIAL
12
16 x 10 x 1105
AB 08 6,90 7,60 31,80
20 x 12 x 125 A10 B10 7,80 8,60 39,00
25 x 16 x 140 3 A12 B12 9,60 10,60 41,80
32 x 20 x 170
1
A16 B16 13,20 14,60 58,50
40 x 25 x 200 A20 B20 22,00 24,20 82,20
50 x 32 x 240 A25 B25 51,00 56,00 126,90
8 x 8 x 80 5 AB 05 7,00 7,70 30,00
10 x 10 x 90
5
AB 06 6,80 7,50 28,90
12 x 12 x 100 AB 08 8,00 8,80 35,10
16 x 16 x 110 A10 B10 8,90 9,80 39,00
20 x 20 x 125 A12 B12 13,20 14,60 41,10
25 x 25 x 140 3 A16 B16 21,80 24,00 57,80
32 x 32 x 170 1 A20 B20 30,50 33,60 78,60
Abmessungen Dimensions
StückPcs / Pièce
LötplatteTip / Plaquette
Grundpreise per Stück für HM-QualitätenBasic prices / prix de base H.T. (Euro € )
Rabatt-GruppeDiscount grp. / Remise grp.
R / RH L / LH K10/20, P20, P25/30 M10/20, P10, P40 K01, K05, M30 | SONDER, SPECIAL
12
8 x 8 x 80
5
AB 06 7,00 7,70 24,00
10 x 10 x 90 AB 08 5,50 6,10 28,90
12 x 12 x 100 A10 B10 6,30 7,00 35,10
16 x 16 x 110 A12 B12 7,70 8,50 39,00
20 x 20 x 125 A16 B16 9,60 10,60 41,10
25 x 25 x 140 3 A20 B20 14,60 16,10 57,80
32 x 32 x 170
1
A25 B25 22,20 24,50 78,60
40 x 40 x 200 A32 B32 41,50 45,70 122,90
50 x 50 x 240 A40 B40 140,00 155,00 230,00
12 x 8 x 100
5
AB 06 7,80 8,60 32,20
16 x 10 x 110 AB 08 9,10 10,10 32,90
20 x 12 x 125 A10 B10 9,60 10,60 39,00
25 x 16 x 140 3 A12 B12 14,60 16,10 41,80
32 x 20 x 1701
A16 B16 21,50 23,70 58,50
40 x 25 x 200 A20 B20 27,40 30,20 82,20
6
Drehmeißel mit HM-SchneidplatteBrazed turning tools • Outils de tour carbure
R L
RH à droite
STANDARD
LH à gaucheSONDERSPECIALSPÉCIAL
Stech-Drehmeißel DIN 4981 - ISO 7 - NF 307Grooving tool • Outil à gorge d‘extérieurR L
Andere Abmessungen und Ausführungen auf Anfrage.
Other dimensions and special styles on demand.
Autres dimensions et formes spéciaux sur demande.
Andere Abmessungen und Ausführungen auf Anfrage.
Other dimensions and special styles on demand.
Autres dimensions et formes spéciaux sur demande.
ACHTUNG!ATTENTION!
Links / 55° ist SONDERLH / 55° is SPECIAL
À gauche / 55° est SPÉCIAL
Andere Abmessungen und Ausführungen auf Anfrage.
Other dimensions and special styles on demand.
Autres dimensions et formes spéciaux sur demande.
RH à droite
LH à gauche
Abmessungen Dimensions
StückPcs / Pièce
LötplatteTip / Plaquette
Grundpreise per Stück für HM-QualitätenBasic prices / prix de base H.T. (Euro € )
Rabatt-GruppeDiscount grp. / Remise grp.
R / RH L / LH K10/20, P20, P25/30 M10/20, P10, P40 K01, K05, M30 | SONDER, SPECIAL
12
12 x 8 x 100 x 3
5
D 03 5,70 6,30 27,40
16 x 10 x 110 x 4 D 04 6,20 6,90 29,60
20 x 12 x 125 x 5 D05 7,50 8,30 33,80
25 x 16 x 140 x 6 3 D 06 10,70 11,80 41,00
32 x 20 x 170 x 8
1
D 08 14,90 16,40 53,80
40 x 25 x 200 x 10 D 10 25,30 27,90 76,90
50 x 32 x 240 x 12 D 12 53,20 58,60 132,00
10 x 10 x 90 x 3
5
D 03 11,10 12,20 29,60
12 x 12 x 100 x 3 D 03 11,90 13,00 33,80
16 x 16 x 110 x 4 D 04 12,50 13,60 41,00
20 x 20 x 125 x 5 D 05 15,40 17,00 45,70
25 x 25 x 140 x 6 3 D 06 20,00 22,00 57,90
8 x 8 x 80 x 3
5
D 03 7,00 7,70 22,00
32 x 32 x 170 x 8 D 08 42,00 46,20 111,00
40 x 40 x 200 x 10 D 10 46,00 51,00 130,00
50 x 50 x 240 x 12 D 12 105,00 116,00 260,00
R L
RH à droite
LH à gauche
Außengewinde-Drehmeißel WN 282 - NF 352External threading tool • Outil à fileter d‘extérieur
Abmessungen Dimensions
StückPcs / Pièce
LötplatteTip / Plaquette
Grundpreise per Stück für HM-QualitätenBasic prices / prix de base H.T. (Euro € )
Rabatt-GruppeDiscount grp. / Remise grp.
R / RH L / LH K10/20, P20, P25/30 M10/20, P10, P40 K01, K05, M30 | SONDER, SPECIAL
12
12 x 8 x 100
5
E 04 10,10 11,20 35,90
16 x 10 x 120 E 05 12,70 14,00 37,00
20 x 12 x 140 E 06 15,30 16,90 40,20
25 x 16 x 160 3 E 08 19,90 21,90 47,70
32 x 20 1801
E 10 22,90 25,20 58,30
40 x 25 x 200 E 12 26,70 29,40 79,50
6 x 6 x 80
5
E 04 12,50 14,00 37,00
8 x 8 x 90 E 04 10,10 11,20 35,90
10 x 10 x 100 E 04 11,10 12,30 32,80
12 x 12 x 110 E 05 12,00 13,20 35,70
16 x 16 x 125 E 06 14,60 16,10 38,10
20 x 20 x 140 3 E 08 16,60 18,30 45,50
25 x 25 x 160
1
E 10 20,10 22,20 54,30
32 x 32 x 180 E 12 25,10 27,70 74,70
40 x 40 x 200 E 12 84,00 90,00 240,50
Innengewinde-Drehmeißel 60° WN 283 - NF 353Internal thread turning tool 60° • Outil à fileter d‘intérieur 60°
Abmessungen Dimensions
StückPcs / Pièce
LötplatteTip / Plaquette
Grundpreise per Stück für HM-QualitätenBasic prices / prix de base H.T. (Euro € )
Rabatt-GruppeDiscount grp. / Remise grp.
R / RH L / LH K10/20, P20, P25/30 M10/20, P10, P40 K01, K05, M30 | SONDER, SPECIAL
12
6 x 6 x 90
5
E 04 15,00 16,50 52,00
8 x 8 x 125 E 04 15,00 16,50 52,00
10 x 10 x 140 E 04 14,90 16,40 51,00
12 x 12 x 160 E 05 16,30 18,00 54,20
16 x 16 x 180 E 06 19,20 21,20 60,80
20 x 20 x 210 3 E 08 21,40 23,60 66,90
25 x 25 x 2501
E 10 27,20 30,00 83,70
32 x 32 x 300 E 12 34,80 38,30 104,60
Ø 6 x 110
5
E 04 15,00 16,50 52,00
Ø 8 x 125 E 04 15,00 16,50 52,00
Ø 10 x 140 E 04 15,00 16,00 51,00
Ø 12 x 160 E 05 17,50 19,00 54,20
Ø 16 x 180 E 06 20,20 22,00 60,80
Ø 20 x 210 3 E 08 22,50 25,00 66,90
Ø 25 x 250 1
E 10 28,50 31,40 83,70
Ø 32 x 300 E 12 37,00 41,00 104,60
7
Drehmeißel mit HM-SchneidplatteBrazed turning tools • Outils de tour carbure
Gerade Rundnasen Drehmeißel WN 235Straight round-nose tool • Outil de tour rayonné droit
Haken-Drehmeißel WN 263 - NF 354Recessing tool • Outil de tour à chambrer R L
Andere Abmessungen und Ausführungen auf Anfrage.
Other dimensions and special styles on demand.
Autres dimensions et formes spéciaux sur demande.
Andere Abmessungen und Ausführungen auf Anfrage.
Other dimensions and special styles on demand.
Autres dimensions et formes spéciaux sur demande.
Andere Abmessungen und Ausführungen auf Anfrage.
Other dimensions and special styles on demand.
Autres dimensions et formes spéciaux sur demande.
Andere Abmessungen und Ausführungen auf Anfrage.
Other dimensions and special styles on demand.
Autres dimensions et formes spéciaux sur demande.
RH à droite
LH à gauche
R L
Gebogene Rundnasen Drehmeißel WN 240Bent round-nose tool • Outil de tour rayonné coudé
RH à droite
LH à gauche
Abmessungen Dimensions
StückPcs / Pièce
LötplatteTip / Plaquette
Grundpreise per Stück für HM-QualitätenBasic prices / prix de base H.T. (Euro € )
Rabatt-GruppeDiscount grp. / Remise grp.
R / RH L / LH K10/20, P20, P25/30 M10/20, P10, P40 K01, K05, M30 | SONDER, SPECIAL
12
6 x 6 x 100
5
D 03 15,00 16,50 40,00
8 x 8 x 125 D 03 15,00 16,50 40,00
10 x 10 x 140 D 03 14,80 16,30 35,00
12 x 12 x 160 D 04 16,30 18,00 37,60
16 x 16 x 180 D 05 19,20 21,20 46,30
20 x 20 x 210 D 06 21,40 23,60 54,30
25 x 25 x 250 3 D 08 27,20 30,00 67,70
32 x 32 x 300 1 D 10 38,00 43,00 118,00
Ø 6 x 100
5
D 03 15,00 16,50 40,00
Ø 8 x 125 D 03 15,00 16,50 40,00
Ø 10 x 140 D 03 16,00 17,00 35,00
Ø 12 x 160 D 04 17,00 19,00 37,60
Ø 16 x 180 D 05 19,50 22,00 46,30
Ø 20 x 210 D 06 25,00 27,50 54,30
Ø 25 x 250 D 08 33,00 37,00 67,70
Ø 32 x 300 D 10 41,50 46,00 118,00
Drehmeißel für Keilriemenprofile WN220 - 34ºTurning tool for V-belt profiles • Outil de tour gorges des courroies trapézoïdales 34° (36°/38°)
Abmessungen Dimensions
StückPcs / Pièce
LötplatteTip / Plaquette
Grundpreise per Stück für HM-QualitätenBasic prices / prix de base H.T. (Euro € )
Rabatt-GruppeDiscount grp. / Remise grp.
R / RH L / LH K10/20, P20, P25/30 M10/20, P10, P40, 36°, 38°
12
16 x 10 x 1105
KEIL 08 27,70 83,10
20 x 12 x 125 KEIL 10 34,70 104,10
25 x 16 x 140 3 KEIL 13 41,50 124,50
32 x 20 x 170
1
KEIL 17 57,10 171,30
40 x 25 x 200 KEIL 20 85,90 257,70
40 x 25 x 220 KEIL 22 283,50
50 x 32 x 240 KEIL 25 313,50
Abmessungen Dimensions
StückPcs / Pièce
LötplatteTip / Plaquette
Grundpreise per Stück für HM-QualitätenBasic prices / prix de base H.T. (Euro € )
Rabatt-GruppeDiscount grp. / Remise grp.
R / RH L / LH K10/20, P20, P25/30
12
10 x 10 x 90
5
RPL 08 25,50
12 x 12 x 100 RPL 10 31,50
20 x 20 x 125 RPL 16 55,90
25 x 25 x 140 RPL 20 83,00
16 x 10 x 110 RPL 08 27,10
20 x 12 x 125 RPL 10 34,10
25 x 16 x 140 RPL 12 48,70
32 x 20 x 170 RPL 16 79,90
40 x 25 x 200 RPL 20 111,40
Abmessungen Dimensions
StückPcs / Pièce
LötplatteTip / Plaquette
Grundpreise per Stück für HM-QualitätenBasic prices / prix de base H.T. (Euro € )
Rabatt-GruppeDiscount grp. / Remise grp.
R / RH L / LH K10/20, P20, P25/30
12
10 x 10 x 90
5
RPL 08 26,90
12 x 12 x 100 RPL 10 32,30
20 x 20 x 125 RPL 16 57,00
25 x 25 x 140 RPL 20 87,20
16 x 10 x 110 RPL 08 29,70
20 x 12 x 125 RPL 10 36,10
25 x 16 x 140 RPL 12 53,20
32 x 20 x 170 RPL 16 82,20
40 x 25 x 200 RPL 20 125,80
8
Drehmeißel mit HM-SchneidplatteBrazed turning tools • Outils de tour carbure
Schrupp-Hobelmeißel 60º WN 245Jack planing tool 60º • Outil de rabotage ébauche 60ºR L
RH à droite
LH à gauche
Abmessungen Dimensions
StückPcs / Pièce
LötplatteTip / Plaquette
Grundpreise per Stück für HM-QualitätenBasic prices / prix de base H.T. (Euro € )
Rabatt-GruppeDiscount grp. / Remise grp.
R / RH L / LH K10/20, P40
12
32 x 32 x 250
5
WN 234,80
40 x 40 x 315 WN 261,30
25 x 16 x 180 WN 63,00
32 x 20 x 220 WN 83,80
40 x 25 x 280 WN 135,30
Andere Abmessungen und Ausführungen auf Anfrage / Other dimensions and special styles on demand / Autres dimensions et formes spéciaux sur demande
RH à droite
LH à gauche
Schrupp-Hobelmeißel 45º WN 250Jack planing tool 45º • Outil de rabotage ébauche 45º
R LAbmessungen Dimensions
StückPcs / Pièce
LötplatteTip / Plaquette
Grundpreise per Stück für HM-QualitätenBasic prices / prix de base H.T. (Euro € )
Rabatt-GruppeDiscount grp. / Remise grp.
R / RH L / LH K10/20, P40
12
40 x 40 x 315
5
WN 224,00
25 x 16 x 180 WN 63,00
32 x 20 x 220 WN 83,80
40 x 25 x 280 WN 116,00
Andere Abmessungen und Ausführungen auf Anfrage / Other dimensions and special styles on demand / Autres dimensions et formes spéciaux sur demande
Kopf-Hobelmeißel WN 255Face planing tool • Outil de rabotage, pelleGerade
straight droit
Abmessungen Dimensions
StückPcs / Pièce
LötplatteTip / Plaquette
Grundpreise per Stück für HM-QualitätenBasic prices / prix de base H.T. (Euro € )
Rabatt-GruppeDiscount grp. / Remise grp.
R / RH L / LH K10/20, P40
1225 x 16 x 180
5
WN 83,80
32 x 20 x 220 WN 115,10
40 x 25 x 280 WN 187,60
Andere Abmessungen und Ausführungen auf Anfrage / Other dimensions and special styles on demand / Autres dimensions et formes spéciaux sur demande
Breitschlicht-Hobelmeißel WN260Broad finishing tool • Outil rabot de finitionR L
RH à droite
LH à gauche
Abmessungen Dimensions
StückPcs / Pièce
LötplatteTip / Plaquette
Grundpreise per Stück für HM-QualitätenBasic prices / prix de base H.T. (Euro € )
Rabatt-GruppeDiscount grp. / Remise grp.
R / RH L / LH K10/20, P40
1225 x 16 x 180
5
WN 73,50
32 x 20 x 220 WN 104,90
40 x 25 x 280 WN 164,70
Andere Abmessungen und Ausführungen auf Anfrage / Other dimensions and special styles on demand / Autres dimensions et formes spéciaux sur demande
Spitz-Hobelmeißel WN 265Point planing tool • Outil de rabotage pointuGerade
straight droit
Abmessungen Dimensions
StückPcs / Pièce
LötplatteTip / Plaquette
Grundpreise per Stück für HM-QualitätenBasic prices / prix de base H.T. (Euro € )
Rabatt-GruppeDiscount grp. / Remise grp.
R / RH L / LH K10/20, P40
1225 x 16 x 180
5
WN 63,00
32 x 20 x 220 WN 83,80
40 x 25 x 280 WN 135,30
Andere Abmessungen und Ausführungen auf Anfrage / Other dimensions and special styles on demand / Autres dimensions et formes spéciaux sur demande
9
Drehmeißel mit HM-SchneidplatteBrazed turning tools • Outils de tour carbure
R L
Automaten-Drehmeißel WN 372Turning tool for automatics • Burin de tournage
RH à droite
LH à gauche
R L
Abmessungen Dimensions
StückPcs / Pièce
LötplatteTip / Plaquette
Grundpreise per Stück für HM-QualitätenBasic prices / prix de base H.T. (Euro € )
Rabatt-GruppeDiscount grp. / Remise grp.
R / RH L / LH K10/20
12
5 x 5 x 100
1
20x2,5x1,5 23,20
6 x 6 x 130 20x3x2 23,20
7 x 7 x 140 20x3x2 24,30
8 x 8 x 140 20x3x2 24,60
10 x 10 x 150 20x4x2 26,90
12 x 12 x 150 20x4x2 30,40
14 x 14 x 160 20x5x3 39,90
16 x 16 x 160 20x5x3 43,30
Andere Abmessungen und Ausführungen auf Anfrage / Other dimensions and special styles on demand / Autres dimensions et formes spéciaux sur demande
Automaten-Stech-Drehmeißel WN 374Cutt-off tool for automatics • Burin à tronçonner
RH à droite
LH à gauche
Abmessungen Dimensions
StückPcs / Pièce
LötplatteTip / Plaquette
Grundpreise per Stück für HM-QualitätenBasic prices / prix de base H.T. (Euro € )
Rabatt-GruppeDiscount grp. / Remise grp.
R / RH L / LH K10/20
12
5 x 5 x 100
1
20x2xSB 27,70
6 x 6 x 130 20x3xSB 27,70
7 x 7 x 140 20x3xSB 27,70
8 x 8 x 140 20x3xSB 29,10
10 x 10 x 150 20x4xSB 35,50
12 x 12 x 150 20x4xSB 36,90
14 x 14 x 160 20x5xSB 41,70
16 x 16 x 160 20x5xSB 54,00
Andere Abmessungen und Ausführungen auf Anfrage, Einstechbreite bei Bestellung angeben! / Other dimensions and special styles on demand, for ordering give cutting widthAutres dimensions et formes spéciaux sur demande, merci d’indiquer la largeur de coupe à la commande!
R L
Gebogene Seiten-Hobelmeißel WN 270Bent side jack planing tool • Outil de rabotage latéral coudé
RH à droite
LH à gauche
Abmessungen Dimensions
StückPcs / Pièce
LötplatteTip / Plaquette
Grundpreise per Stück für HM-QualitätenBasic prices / prix de base H.T. (Euro € )
Rabatt-GruppeDiscount grp. / Remise grp.
R / RH L / LH K10/20, P40
1225 x 16 x 180
5
WN 76,10
32 x 20 x 220 WN 110,00
40 x 25 x 280 WN 181,90
Andere Abmessungen und Ausführungen auf Anfrage / Other dimensions and special styles on demand / Autres dimensions et formes spéciaux sur demande
Drehmeißel-Halter mit Bohrung WN BOToolholder • Porte-outil
Abmessungen Dimensions
StückPcs / Pièce
Schaft / Shank / Queue Ø Grundpreise per Stück für HM-QualitätenBasic prices / prix de base H.T. (Euro € )
Rabatt-GruppeDiscount grp. / Remise grp.
23
10 x 10 x 70
1
6 18,80
12 x 12 x 80 8 20,50
14 x 14 x 85 10 22,50
16 x 16 x 90 12 25,00
20 x 20 x 100 16 29,70
25 x 25 x 110 20 37,00
30 x 30 x 120 25 93,00
40 x 40 x 130 32 117,40
10
HM-LötplattenCarbide brazing tips • Plaquettes carbures
DIN 4950 HM-Qualitäten • Carbide grades • Nuances: P20, P25/30, K10/20
Cl
Ar
l Br
t
t
t
18°
18°
45°
≈1/6s
A
45°
≈1/6s
C
14° 45°
≈1/4s
SS
Sl
D
D
B
Cl
Ar
l Br
t
t
t
18°
18°
45°
≈1/6s
A
45°
≈1/6s
C
14° 45°
≈1/4s
SS
Sl
D
D
B
Cl
Ar
l Br
t
t
t
18°
18°
45°
≈1/6s
A
45°
≈1/6s
C
14° 45°
≈1/4s
SS
Sl
D
D
B
Gr
l
12°45°
Jl
12°45°
Hr
t
t
s≈1
/6s
s ≈1/6
s
14°45°
s ≈1/4
s
l
t
9°80
°
A
B
Schnitt A-B
E
E
Andere Abmessungen und Ausführungen auf Anfrage / Other dimensions and special styles on demand / Autres dimensions et formes spéciaux sur demande
StückPcs / Pièce
Abmessungen Dimensions
Bezeichnung / Ref. / Réf. Grundpreise per Stück für HM-QualitätenBasic prices / prix de base H.T. (Euro € )
Rabatt-GruppeDiscount grp. / Remise grp.
10
5 x 3 x 2 A5/B5 1,50
25
6 x 4 x 2,5 A6/B6 1,60
8 x 5 x 3 A8/B8 2,30
10 x 6 x 4 A10/B10 3,20
12 x 8 x5 A12/B12 4,80
16 x 10 x 6 A16/B16 7,60
20 x 12 x 7 A20/B20 11,90
25 x 14 x 8 A25/B25 19,00
32 x 18 x 10 A32/B32 36,60
40 x 22 x 12 A40/B40 67,30
50 x 25 x 14 A50/B50 111,70
StückPcs / Pièce
Abmessungen Dimensions
Bezeichnung / Ref. / Réf. Grundpreise per Stück für HM-QualitätenBasic prices / prix de base H.T. (Euro € )
Rabatt-GruppeDiscount grp. / Remise grp.
10
5 x 3 x 2 C5 1,50
25
6 x 4 x 2,5 C6 1,60
8 x 5 x 3 C8 2,30
10 x 6 x 4 C10 3,20
12 x 8 x5 C12 4,80
16 x 10 x 6 C16 7,60
20 x 12 x 7 C20 11,90
25 x 14 x 8 C25 19,00
32 x 18 x 10 C32 36,60
40 x 22 x 12 C40 67,30
50 x 25 x 14 C50 111,70
StückPcs / Pièce
Abmessungen Dimensions
Bezeichnung / Ref. / Réf. Grundpreise per Stück für HM-QualitätenBasic prices / prix de base H.T. (Euro € )
Rabatt-GruppeDiscount grp. / Remise grp.
10
4 x 10 x 2,5 E4 1,90
25
5 x 12 x 3 E5 2,60
6 x 14 x 3,5 E6 3,60
8 x 16 x 4 E8 4,80
10 x 18 x 5 E10 6,80
12 x 20 x 6 E12 9,60
16 x 22 x 7 E16 14,70
20 x 25 x 8 E20 21,50
25 x 28 x 9 E25 32,20
32 x 32 x 10 E32 48,70
StückPcs / Pièce
Abmessungen Dimensions
Bezeichnung / Ref. / Réf. Grundpreise per Stück für HM-QualitätenBasic prices / prix de base H.T. (Euro € )
Rabatt-GruppeDiscount grp. / Remise grp.
10
3 x 8 x 3 D3 1,90
25
4 x 10 x 4 D4 2,80
5 x 12 x 5 D5 3,90
6 x 14 x 6 D6 5,50
8 x 16 x 8 D8 8,80
10 x 18 x 10 D10 13,90
12 x 20 x 12 D12 21,20
11
DIN 4966HM-Qualitäten • Carbide grades • Nuances: P20, P25/30, K10/20
Gr
l
12°45°
Jl
12°45°
Hr
t
t
s≈1
/6s
s ≈1/6
s
14°45°
s ≈1/4
s
l
t
9°80
°
A
B
Schnitt A-B
E
E
Gr
l
12°45°
Jl
12°45°
Hr
t
t
s≈1
/6s
s ≈1/6
s
14°45°
s ≈1/4
s
l
t
9°80
°
A
B
Schnitt A-B
E
E
Gr
l
12°45°
Jl
12°45°
Hr
t
t
s≈1
/6s
s ≈1/6
s
14°45°
s ≈1/4
s
l
t
9°80
°
A
B
Schnitt A-B
E
E
Andere Abmessungen und Ausführungen auf Anfrage / Other dimensions and special styles on demand / Autres dimensions et formes spéciaux sur demande
StückPcs / Pièce
Abmessungen Dimensions
Bezeichnung / Ref. / Réf. Grundpreise per Stück für HM-QualitätenBasic prices / prix de base H.T. (Euro € )
Rabatt-GruppeDiscount grp. / Remise grp.
10
6 x 4 x 2 G6 1,60
25
8 x 5 x 2 G8 1,90
10 x 6 x 2,5 G10 2,70
12 x 8 x 3 G12 3,90
16 x 10 x 4 G16 6,20
StückPcs / Pièce
Abmessungen Dimensions
Bezeichnung / Ref. / Réf. Grundpreise per Stück für HM-QualitätenBasic prices / prix de base H.T. (Euro € )
Rabatt-GruppeDiscount grp. / Remise grp.
10
6 x 4 x 2 H6 1,60
25
8 x 5 x 2 H8 1,90
10 x 6 x 2,5 H10 2,70
12 x 8 x 3 H12 3,90
16 x 10 x 4 H16 6,20
StückPcs / Pièce
Abmessungen Dimensions
Bezeichnung / Ref. / Réf. Grundpreise per Stück für HM-QualitätenBasic prices / prix de base H.T. (Euro € )
Rabatt-GruppeDiscount grp. / Remise grp.
10
6 x 4 x 2 J6 1,60
25
8 x 5 x 2 J8 1,90
10 x 6 x 2,5 J10 2,70
12 x 8 x 3 J12 3,90
16 x 10 x 4 J16 6,20
Notizen / notes:
www.wilke-tools.de HM 0
3/08
Postanschrift:Postfach 6104D - 65735 Eschborn/Ts.
Werner Wilke Zerspanungstechnik GmbHTelefon +49 (0) 6196 - 50 36-0 • Telefax +49 (0) 6196 - 50 36-88 • [email protected] • www.wilke-tools.de
Lager, Fertigung, Nachschleifdienst:Auf den Sandäckern 7D - 35315 Homberg/Ohm
Hausanschrift:Eschborner Straße 4D - 65824 Schwalbach/Ts.