For extra tough floor protection during construction

and remodeling, nothing beats hardboard. Hardboard is

44 mil. thick and designed to protect wood, tile, marble,

concrete, and any other hard surface.

CONSIDER USING WR-HARDBOARD TO PROTECT HARD FLOORING SURFACES

Heavy duty, thick 44 mil. protection

Water resistant for up to 72 hours

Lays out flat, fast, saving you time and money

Eco-friendly, made from 100% recycle material

What does WR Stand for?

The “WR” in Hardboard-WR stands for “water resistant.” The experts

at Pro Tect developed the hardboard floor protection to be water

resistant for up to 72 hours.

Quickly replacing Masonite on job

sites nationwide

White Masonite is a great product, Hardboard-WR is faster, less

expensive, and easier to handle, which makes it a leading choice on

job sites nationwide.

This guide will show you step-by-step how easy it is to use and

install WR-Hardboard to protect flooring surfaces for construction

and remodeling.

STEPS

UNROLLSTEP 1

1

Unrolling WR-Hardboard is a breeze. Just let it fly!

Repeat the unrolling process to create side-by-side sections as pictured above.

1

TAPE THE SEAMS

Tape the seams in between sections using Pro

Tect hardboard tape. Apply tape every couple

of yards to secure the WR-Harboard.

STEP 2

1

SECURE THE SEAMS

Once you have the WR-Hardboard in place,

take the roll of tape and tape off the seams.

Tape the length of the WR-Hardboard in full

for maximum stability and protection.

STEP 3

CONCLUSION

FOR HARDWOOD STAIRS, FOLLOW THESE SIMPLE STEPS:

Unroll

Tape the seams

Secure the seams

Installing WR-Hardboard protection is quick and easy. It provides top

notch floor protection for hard flooring surfaces.

If you have any questions about WR-Hardboard or any

other floor protection concerns, talk to the pros at

Pro Tect. Check out Pro Tect online for more floor

protection tips, tools, and products.

THANKS