hannover messe 2018 - siemens · center offers data buffering on the opc ua interface to avoid data...
TRANSCRIPT
Unrestricted © Siemens AG 2018
siemens.com/hm18Unrestricted © Siemens AG 2018
Hannover Messe 2018Welcome to the industry’s global hotspot!
Unrestricted © Siemens AG 2018
Hannover Messe 2018The digital transformation is gaining momentum
Security
Speed Flexibility Quality Efficiency
Hannover Messe 2018
Unrestricted © Siemens AG 2018
Hannover Messe 2018Date with Digital Twins
Digital TwinProduct
Digital TwinProduction
Digital TwinPerformance
Virtualproduct
Virtualproduction
Realproduct
RealproductionAutomation
Continuous improvement
Insights from performance with MindSphere
Idealdelivery
Collaboration platform: Teamcenter
Verification Validation
Specification Commissioning
Hannover Messe 2018
Unrestricted © Siemens AG 2018Hannover Messe 2018
Hannover Messe 2018Digital Enterprise – implement now
Open Space
Machine tools
Additive Manufacturing
MindSphere Lounge
SIDRIVE IQ
MindSphere Partner
Customer Skylounge Fiber
Oil and Gas
Digital Enterprise for process industries
Digital Enterprise
Digital Enterprise for discrete industries
Electronics
Food and Beverage
AutomotiveEnergy for Industry
Future of Automation
Security
Industrial Communication
Unrestricted © Siemens AG 2018
Hannover Messe 2018Bringing the Digital Twins to life
Hannover Messe 2018
Aerospace
Most holisticNew heights
Automotive
Drivers seat E-CarsChargingData 4 Energy
Food & Beverage
“End to end“ 4 qualityCraft & Big breweries
Machine Builders
Virtual commissioningTime to market
AdditiveManufacturing
IndustrializeDesign to services
Machine Tools
Transparent productionEfficient development
Oil & gas
PerformanceCost reductionWorldwide access
Energy
No Energy - No DigitalMax. transparency
ChemicalIndustry
Green & Brown fieldModular & Paperless
Unrestricted © Siemens AG 2018
Hannover Messe 2018Highlight products and technologies
TIP
EnergyEfficiency
IndustrialControls
PowerSupply
Drives Motors
Industrial Securityand Services
ProcessAutomation Industrial
Identification
Finance, Recruiting,Compliance
IndustrialCommunication
DE Process
DE DiscreteTIA Portal
TIA Wall
HMI
ControllerEnergySupply
Hannover Messe 2018
Unrestricted © Siemens AG 2018
Digital Enterprisefor discreteindustries
AutomationDesigner
Hannover Messe 2018Product highlights
Hannover Messe 2018
Unrestricted © Siemens AG 2018
Automation DesignerIntegrated engineering
Automation DesignerUntil now there was no integrated offering for the engineering of electricaland automation systems to create the Digital Twin of Production. These taskswere handled by the domain experts in disparate systems. With AutomationDesigner, Siemens now offers an integrated solution for electrical andautomation engineering of production lines and machines that, in conjunctionwith our MCAD solutions, enables a mechatronic digital twin of production.
Automation Designer• acts as central design application for electrics and automation software• integrates electrical and automation data with system design and
mechanical data• enables functional, mechatronic engineering of production lines and
machines• provides rule-based engineering support for E-CAD and TIA Portal projects
Value• Create complex engineering solutions with higher quality in less time
• Realize mechatronics for your digital twin of production
Hannover Messe 2018
Mechanics Electrics AutomationSoftware
FB
Unrestricted © Siemens AG 2018
Digital Enterprisefor discreteindustries
AutomationDesigner
Hannover Messe 2018Product highlights
Hannover Messe 2018
TIA Portal
TIA Portal V15
Unrestricted © Siemens AG 2018
TIA Portal – V15.1More than an engineering framework
Feature / Function BenefitSupport of S7-1500R/H CPUs• Redundant and high-availability
applications τ
• Enhancement of S7-1500 portfolio forredundant applications
• Realization of applications liketunnels or logistics with S7-1500
Open communication with OPC UA:• S7-1500 as OPC UA Client as well as
methods for OPC UA Client/Server• SIMATIC OPC UA Modelling Editor
(SiOME)• Fulfillment of Companion
Specifications
τ
• Perfect supplement to PROFINET• Standardized horizontal and vertical
communication as well ascommunication between machines oraggregates
• Fulfill requirements of industry-specific standards like OMACPackML or Weihenstephan
Coordinated commissioning in a teamwith Software Units based on S7-1500• Separation of controller program in
logical consistent units• Separate commissioning of units
τ
• Fast and more flexible commissioningof S7-1500 applications
• Complete management and sharingof program units (inclusive UDT- /PLC- Tags) with TIA Portal libraries
https://www.siemens.com/global/en/home/products/automation/industry-software/automation-software/tia-portal.html
Unrestricted © Siemens AG 2018
IndustrialSecurity
Security in TIAPortal
Digital Enterprisefor discreteindustries
AutomationDesigner
Hannover Messe 2018Product highlights
Hannover Messe 2018
TIA Portal
TIA Portal V15
Unrestricted © Siemens AG 2018
IndustrialCommunication
Key 4 Digitalization
IndustrialSecurity
Security in TIAPortal
Digital Enterprisefor discreteindustries
AutomationDesigner
Hannover Messe 2018Product highlights
Hannover Messe 2018
TIA Portal
TIA Portal V15
Unrestricted © Siemens AG 2018
Industrial CommunicationTelecontrol Server Basic
New 3.1 version of TeleControl Server BasicThe new 3.1 version of the TeleControl Server Basic software for the controlcenter offers data buffering on the OPC UA interface to avoid data loss.
TeleControl Server Basic communicates with the compact telecontrol units ofthe SIMATIC RTU3000C family as well as with the modular RTUs based onSIMATIC controllers of the S7-1200 and SIMATIC ET 200SP families.TeleControl Basic is the underlying telecontrol protocol.
Version 3.1 – now also released for Windows Server 2016 – also supportsthe connection of the new SIMATIC RTU3010C.
http://www.siemens.com/telecontrol
Hannover Messe 2018
Unrestricted © Siemens AG 2018
Controller
RedundantHigh-availabilityET200-family
IndustrialCommunication
Key 4 Digitalization
IndustrialSecurity
Security in TIAPortal
Digital Enterprisefor discreteindustries
AutomationDesigner
Hannover Messe 2018Product highlights
Hannover Messe 2018
TIA Portal
TIA Portal V15
Unrestricted © Siemens AG 2018
Life Cycle S7-controllersBasic controller
Appl
icat
ions
com
plex
ity
CapabilityI/O capacity, program size, instruction time, communication skills, …
The modular compact controllerfor solutions in the compact /basic area of automation
SIMATIC S7-1200
The modular controller forsystem solutions in the middleto high-end range automation *)
SIMATIC S7-400
Logic modules for switching andmonitoring for low-endapplications automation
LOGO!
„TIA“applications
„Stand
alone“applications
Bas
icSt
anda
rd
(modular)compact
controller
(modular)controller
logic modules
Product CharacterizationApplication
Nan
o
Segment
SIMATIC S7-300
Adv
ance
d
Phase-out 1stof octobre
2013
Unrestricted © Siemens AG 2018
Life Cycle S7-controllersStandard controller
Appl
icat
ions
com
plex
ity
CapabilityI/O capacity, program size, instruction time, communication skills, …
The modular compact controllerfor solutions in the compact /basic area of automation
SIMATIC S7-1200
The modular controller forsystem solutions in the middleto high-end range automation *)
SIMATIC S7-400
Logic modules for switching andmonitoring for low-endapplications automation
LOGO!
„TIA“applications
„Stand
alone“applications
Bas
icSt
anda
rd
(modular)compact
controller
(modular)controller
logic modules
Product CharacterizationApplication
Nan
o
Segment
SIMATIC S7-300
Adv
ance
d
Phase-outplanned asfrom:1st of
octobre 2023
Unrestricted © Siemens AG 2018
Life Cycle S7-controllers :ET 200S
Phase-outplanned:1stof octobre
2020
Unrestricted © Siemens AG 2018
Advanced Controller SIMATIC S7-1500New mechanical Design
CPU 1511C
CPU 1512C
CPU 1511(F)
CPU 1513(F)
S7-1500 Compact-CPUs S7-1500 modular CPUs
Unrestricted © Siemens AG 2018
Advanced Controller SIMATIC S7-1500New mechanical Design
S7-1500 CPU with a new mechanical design:• A new mechanical design because of the integration
of the display onboard of the CPU:• Identical installation dimensions• Slight changes regarding placement of
all connectors/plugs (PN-plug 90°changed)• RUN/STOP-switch is replaced by RUN/STOP buttons:
• No damage of the RUN/STOP-switch any longer• „STOP ACTIVE“ shows that the CPU was stopped by the
“STOP”-button on the CPU• Identical handling of default reset or overall reset
• The display could be read – even if the cover is opened• Identical mechanical manipulation security mechanismsSpare part functionality:The new CPUs are completely spare part compatible to theirpredecessor CPUs
Unrestricted © Siemens AG 2018
Advanced Controller SIMATIC S7-1500New mechanical Design
Change of thedisplay duringRUN (identicalbehavior)
Pull and plug of theSIMATIC Memory Cardinclusive fixing of the SMC
Unrestricted © Siemens AG 2018
SIMATIC S7-1500Higher availability by new S7-1500R and S7-1500H
S7-1500R: CPU 1513R/1515R Feature / Function τ Benefit
Redundant PLCs• Switchover time 200 – 500ms• Support of up to 50 devices in
PROFINET-Ring• System – IP Address• Configuration in TIA-Portal like
Standard CPU
High-Availability PLC• Same features as Redundant PLC• Dedicated High Performance
synchronization modules• Distance between CPUs up to 10
km• Switchover time < 100ms
Higher productiondue to higher availability
No data lossdue to automatic synchronization
Simple handlingbecause no extra Know-How necessaryfor Redundancy configuration
S7-1500H: CPU 1517H
Unrestricted © Siemens AG 2018
Functional Safety with ET 200New Possibilities by new fail-safe I/O modules
Feature / Function BenefitET 200ecoPN 4 F-DI/3F-DQ• Mix-IO module with fail-safe In- and
Outputs (2A) (up to Pl e/SIL 3)• 1oo2-evaluation onboard• Channel granular diagnostics• Retentive PROFIsafe address via
Coding-Element (no DIP Switches)• Standardized Y-connector
τ
Placeable anywhere in machinedue to compact footprint (IP67)
Higher availabilitydue to fast error location
Simpler handlingdue to standardization
ET 200SP F-AI (0)4..20 mA• Certified up to PL e/SIL 3• Resolution 15bit + VZ• Channel granular diagnostics• 1oo2-evaluation onboard incl.
hysteresis• Retentive PROFIsafe address via
Coding-Element (no DIP Switches)
τ
Higher availabilitydue to fast error location
Simpler handlingdue to standardization
ET 200eco PN 4 F-DI/3F-DQ
ET 200SP F-AI (0)4..20 mA
Unrestricted © Siemens AG 2018
SIMATIC ET 200 – Module to Module Communication (MtM)Shortest response times without detour via the CPU
Feature / Function BenefitNew for ET 200SP IM HF from FW V4.1
Module to Module Communication(MtM):• Direct transmission of data from an
input module to one or more outputmodules in the same ET 200 stationwithout detour via the PLC program
• Reaction in the receiver module viaimplemented parametrizable logic
• Significantly shorter reaction times(Only 1 PROFINET cycle for clamp /clamp reaction = 250µs)
• Unlimited quantity structure
τ
• Saving space in the machine, thanksto the possibility of moving sensorsand actuators closer together(less reaction time requires less space)
• Increase product quality byreducing von Fluctuations of thereaction time (jitter) for most precisereactions and optimization of thedeterministic
• Saving CPU performance andstorage
Based on MtM-Communication:New operating mode "Cam controller“forET 200SP DQ 4x24VDC/2A HS via FW-Updatefor up to 16 cams per module
τ
• Saving of Engineering effort with theimplementation of cam controllers(parameterization instead ofprogramming)
Sensor Actuator
DQ
-Mod
ul
DI/
AI-M
odul
Unrestricted © Siemens AG 2018
HMI & PC-basedAutomation
New Ex IPCPro-IP65 all-roundWinCC
Controller
RedundantHigh-availabilityET200-family
IndustrialCommunication
Key 4 Digitalization
IndustrialSecurity
Security in TIAPortal
Digital Enterprisefor discreteindustries
AutomationDesigner
Hannover Messe 2018Product highlights
Hannover Messe 2018
TIA Portal
TIA Portal V15
Unrestricted © Siemens AG 2018
New generation Ex IPCFor demanding visualization in explosive atmospheres
Panel PC Ex NG
Feature / Function Benefit
• Brilliant displays in• 22” 16:9• 24“16:9 or 16:10
τ• Perfectly suited for high-
resolution monitoring concepts
• Extreme temperature range from-30 °C to 55 °C
• Maximum flexibility for anyapplication scenario
• Available as panel PC and thinclient/monitor versions τ
• Mounting on a stand, support armor suspended arm
• Global certificatesIECEx, ATEX zones 1, 21 and 2,22DNV / GL, …
τ
• Applications all over the world dueto global certifications
Unrestricted © Siemens AG 2018
The new generation of PRO HMI devicesAll-round IP65 protection, no compromises
Comfort Panel PRO, IPC477E PRO, Industrial Thin Client ITCxx00 PRO, industrial monitor IFPxx00 PRO
Feature / Function Benefit
• Slim-line devices with all-roundIP65 protection
• In 12”, 15", 19" and 22" screensizes τ
• Customized applications thanksto portfolio-wide selection
• Mounting options with pedestalor support arm
τ
• Use directly at the machinethanks to diverse mountingoptions
• Scratch-proof glass fronts(single-touch or multi-touch)
τ
• Very user-friendly in all conditions
Unrestricted © Siemens AG 2018
The new generation of PRO HMI devicesFlexible expansion options, all-round protection
System components with all-round IP65 protection
Feature / Function Benefit
• Extension units in 4 sizes• Combination of any basic device
and extension unit τ
• Flexibility when developing yourown operating concepts
• Tailor-made for your application
• Modular operator control design• Insert labels
τ
• Individual removal of hardwarepushbuttons
• Easy inscription options
• Variants:Hardwired / PROFINET /PROFIsafe / Box (deep emptyenclosure)
τ
• Fast commissioning• Reduced wiring overhead• Full flexibility
PROFINET
PROFISAFE
HARDWIRED
Unrestricted © Siemens AG 2018Hannover Messe 2018
2017
WinCC InnovationsNew approach for supported devices with WinCC V15
In order to maintain legacy panels with images up to V11 in WinCC V15, they have to be upgraded to Basic orComfort Panels before.
Q3 Q4 Q1 Q2 Q3 Q4
V14 V15V14 SP1TIA Portal
Only TIA Portal Panels from Image V12
WinAC MP 177, WinAC MP 277, WinAC MP 377 No support in V15
OP and TP Series 77, Series 177 and Series 277 No support in V15
Multi Panels Series 177, Series 277 and Series 377 No support in V15
TIA Portal Panels with V11 Image No support in V15
2016
To minimize the installationoverhead:DVD1WinCC / STEP 7 Professionalwith current Panel Images forV15 (V12, V14.1, V15.0)DVD2Support Tools and OSSDVD3Legacy device images forV15.0 (V13.0, V13.1, V14.0)
2
3
1
Unrestricted © Siemens AG 2018Hannover Messe 2018
TIA Portal V15 – WinCC RT ProfessionalInstallation info & 2 New SUS contracts for RT Prof
No Support of following Windows OS:
• Windows 7 (32bit)
• Windows 8 (32bit / 64bit)
• Windows 8.1 (32bit / 64bit)
Reason: The dependency of SIMATIC NET V15
Behavior: SIMATIC NET V15 locks the installation on these OS
Software Update Service for WinCC RT Professional
6AV2107-0DB00-0AL0 WinCC RT Professional Client (SUS - Package)6AV2105-0XA00-0AL0 WinCC RT Professional (SUS - Package)
6AV2107-0DB00-0AY0 WinCC RT Professional Client (SUS-Download)6AV2105-0XA00-0AY0 WinCC RT Professional (SUS-Download)
Unrestricted © Siemens AG 2018
Human Machine Interface & Industrial PC
SIMATIC HMI and IPC
With “SIMATIC HMI Option+” we provide new extendedfunctionality (e.g. user authentication via RFID byintegrating PM-Logon Basic) for the SIMATIC HMIComfort Panels family.https://support.industry.siemens.com/cs/be/nl/view/109754400/en
Hannover Messe 2018
Unrestricted © Siemens AG 2018
HMI & PC-basedAutomation
New Ex IPCPro-IP65 all-roundWinCC
IndustrialIdentification
SIMATIC MV540SIMATIC RF615A
Controller
RedundantHigh-availabilityET200-family
IndustrialCommunication
Key 4 Digitalization
IndustrialSecurity
Security in TIAPortal
Digital Enterprisefor discreteindustries
AutomationDesigner
Hannover Messe 2018Product highlights
Hannover Messe 2018
TIA Portal
TIA Portal V15
Unrestricted © Siemens AG 2018
Industrial IdentificationSIMATIC MV540
SIMATIC MV540The SIMATIC MV540 offers considerably greater functionality andperformance than the preceding series SIMATIC MV440, but it’s stillcompatible. Higher computing power allows the reading process to beaccelerated. Through an in-depth analysis of image information, the readingreliability can be increased even under difficult conditions.Powerful accessories increase functional reliability and the range ofapplication. The one-button configuration for network parameterization andread configuration, the device configuration via WBM and system integrationvia TIA Portal makes the handling easy.
http://www.siemens.com/optical-identification
Hannover Messe 2018Page 35 March 2018
Unrestricted © Siemens AG 2018
Industrial IdentificationSIMATIC RF615A
SIMATIC RF615AThanks to its particularly compact design (52 x 52 x 16 mm) and high degreeof protection (IP67), the SIMATIC RF615A antenna for the SIMATIC RF600UHF-system is particularly suitable for the installation in confined spaces andfor the use even under the harshest of industrial conditions.It can be mounted either on metallic and non-metallic surfaces and provides aread/write range of up to 1.3 meters. Its linear polarization also helps toreduce the impact of reflections and overreach reliable.
http://www.siemens.com/rf600
Hannover Messe 2018Page 36 March 2018
Unrestricted © Siemens AG 2018
Industrial IdentificationMDS D560
MDS D560The MDS D560 is a rugged, passive and maintenance-free transponderwhich based on ISO 15693. The transponder enables the use of a large 8kilobyte FRAM and has a range of up to 160 millimeters.The proven FRAM technology allows the MDS D560 transponders to berewritten at high speed with an almost unlimited number of write cycles. Itshigh degree of protection and chemical resistance makes it particularly suitedfor the use in harsh industrial environments.To capture the transponder, the proven RFID readers of the RF200/RF300(ISO mode) series are employed.
http://www.siemens.com/rfid
Hannover Messe 2018Page 37 March 2018
Unrestricted © Siemens AG 2018
Industrial IdentificationSIMATIC RF645T
SIMATIC RF645TThe SIMATIC RF645T is a passive and maintenance-free transponder whichbased on the UHF Class 1 Gen 2 technology in compliance with ISOstandard 18000-63. The transponder features a large 448-bit EPC and 2048-bit user memory, and can be mounted directly on any type of metallicsurfaces by gluing or fixing using a mounting cover or bracket. Depending onthe surroundings and the readers used, a read/write range of up to six meterscan be achieved.To capture the transponder, the proven RFID readers of the SIMATIC RF600series are employed.
http://www.siemens.com/rf600
Hannover Messe 2018Page 38 March 2018
Unrestricted © Siemens AG 2018
HMI & PC-basedAutomation
New Ex IPCPro-IP65 all-roundWinCC
IndustrialIdentification
SIMATIC MV540SIMATIC RF615A
Controller
RedundantHigh-availabilityET200-family
IndustrialCommunication
Key 4 Digitalization
IndustrialSecurity
Security in TIAPortal
Digital Enterprisefor discreteindustries
AutomationDesigner
Hannover Messe 2018Product highlights
Hannover Messe 2018
TIA Portal
TIA Portal V15
Industry Services
Industrial SecurityServices
Unrestricted © Siemens AG 2018
siemens.com/hm18Unrestricted © Siemens AG 2018
Hannover Messe 018Digital Enterprise – implement now.
Unrestricted © Siemens AG 2018
Unrestricted © Siemens AG 2018