Handouts Band-Around Chimney

Tops

HY-C Covers are custom made to fit any chimney. The hood overhangs masonry approximately three inches on both the sides and ends. The cover attaches securely to the chimney with 2 1/4" draw band. Four adjustable corner clamps provide ample flexibility for proper fit.

• 100% Type 304 Stainless Steel

• Maintenance Free

• No Rust

• Guaranteed to fit your measurements

• Aluminum: Maximum base size: 60” x 96” long

• Stainless: Maximum base size: 48” x 96” long

Custom-Made to fit any Chimney

241/ 2"

361/2"

8

Chimney Covers Custom-Made Band-AroundALUMINUM OR STAINLESS STEEL

{12" BRACES {15" BRACES {18" BRACES

9"9"6"6"31/2"12"

23"

36"

Example Top View

{9" BRACES

31/2"

TILE TILETILE

31/2"

Standard 9" braces andexpanded metal mesh areused when flue tile plus mortar height is 31⁄2" or less.If tile height is greater referto the chart.

The hood overhangs masonry approximately three inches on both the sides and ends. The cover adjustable corner clamps provide ample flexibility for proper fit.

HOW TO ORDER:1) Measure the outside dimensions of all four sides of the

top row of brick.2) Measure the tile height from the top of the first row of

brick, to the top of the tallest tile.Any questions call: 1-800-325-7076

ALUMINUM

STAINLESS STEELStainless Steel is recommended for use with wood, coal, or oil burning. Backed by the HY-C Lifetime Limited Warranty.

Information on Cement-On and Clamp-to-Tile Models Available Upon Request.All Custom Covers Shipped Knocked-Down.All Units ≥ 32" Width Will Be Shipped With a Minimum of 12" Mesh.

Note: In situations where Oil or Coal is burned, or when Wood/Pellets are used as primary source of heat, do not use Aluminum or Black-Painted Galvanized Steel Covers.

Maximum base size: 48" wide x 96" long.

Maximum base size: 60" wide x 96" long.

Custom covers can be built to fit virtually any size chimney. Aluminum is recommended for most applications to supply low cost and low maintenance protection.

attaches securely to the chimney with a draw band. Four 21⁄4"

Made in the U.S.A.

Port Sheet Metal | 154 State Street | Newburyport MA 01950 Call for Current Pricing & Availability: (978) 462-6132

241/ 2"

361/2"

8

Chimney Covers Custom-Made Band-AroundALUMINUM OR STAINLESS STEEL

{12" BRACES {15" BRACES {18" BRACES

9"9"6"6"31/2"12"

23"

36"

Example Top View

{9" BRACES

31/2"

TILE TILETILE

31/2"

Standard 9" braces andexpanded metal mesh areused when flue tile plus mortar height is 31⁄2" or less.If tile height is greater referto the chart.

The hood overhangs masonry approximately three inches on both the sides and ends. The cover adjustable corner clamps provide ample flexibility for proper fit.

HOW TO ORDER:1) Measure the outside dimensions of all four sides of the

top row of brick.2) Measure the tile height from the top of the first row of

brick, to the top of the tallest tile.Any questions call: 1-800-325-7076

ALUMINUM

STAINLESS STEELStainless Steel is recommended for use with wood, coal, or oil burning. Backed by the HY-C Lifetime Limited Warranty.

Information on Cement-On and Clamp-to-Tile Models Available Upon Request.All Custom Covers Shipped Knocked-Down.All Units ≥ 32" Width Will Be Shipped With a Minimum of 12" Mesh.

Note: In situations where Oil or Coal is burned, or when Wood/Pellets are used as primary source of heat, do not use Aluminum or Black-Painted Galvanized Steel Covers.

Maximum base size: 48" wide x 96" long.

Maximum base size: 60" wide x 96" long.

Custom covers can be built to fit virtually any size chimney. Aluminum is recommended for most applications to supply low cost and low maintenance protection.

attaches securely to the chimney with a draw band. Four 21⁄4"

Made in the U.S.A.

Call Today!(978) 462-6132