halgan€¦ · halgan pty ltd unit 2, 187 south creek rd, cromer nsw 2099 freecall 1800 626 753 ph:...
TRANSCRIPT
Halgan Pty LtdUnit 2, 187 South Creek Rd, Cromer NSW 2099
Freecall 1800 626 753 Ph: Sydney 02 9972 1355
Fax: 02 9972 1455Email: [email protected]
halgan pty ltdhalgan.com.au
DisclaimerWhilst all care has been taken in compiling this information and it is
provided in good faith, it is not to be relied on as a substitute forprofessional advice. Halgan Pty Ltd accepts no responsibility for theaccuracy, completeness or timeliness of the information. For more
information contact your Halgan Pty Ltd
halgan
halgan pty ltd
Aqua 204
HDPE
Rainwater
Storage
Tanks
© H
alga
n P
ty L
td 2
014
2
features
• For underground installation and above ground
• Available in volumes from 5.000 to 52.500 litres
• Double-walled – especially robust
• Components completely pre-assembled
• Available in three equipment variants
• Made of HDPE – lower weight than concrete and steel
• Food-safe material
• Maximum load: can be driven over by a truck (SLW 30 – 11,5 tons axle load)
• Groundwater-stable up to body centre
• Available with additional access manhole as inspection shafts from to 8.500 litres upwards
• Intermediate sizes and inflows and outflows in DN 150 to DN 300 on request
• Tank optionally couple able lengthways and sideways on request
• Also available as a retention cistern – retention regulator
• 10 years guarantee on the tank body
Halgan Aqua 204 HDPE Rainwater Storage Tanks
Available in volumes between 5,000 L – 52,000 L
11 Tonne trafficable load rating
© H
alga
n P
ty L
td 2
014
3
applications• Retention tanks
• Detention tanks
• Horizontal pump stations
• Vertical pump stations
• Emergency Storage
• Mines
• Sewerage
• Construction site
• Pre-treatment devices
• Grease Arrestors
• Cooling Pits
• Lint Traps
• Acid Neutralising Traps
• Sediment Traps
• Pre-treatment Storage
• Septic tanks
• Rainwater storage with pump system.
+ + + +
HOUSE PACKAGE 2 COMPONENTS
• AQUA’TERNE 112, 122, 135 or 204 !
inc. riser with cap and
childproof lock, calmed inlet and
anti rodent siphon
• Volume filter @
inc. telescopic extension
• Swimming outlet #
• MiniMAX compact module $
with integrated pump, system control, automatic
drinking water backfeed and fill level display
• Set of labels %
Type Volume|l Art. no.
AT 112 2.700 31120085
5.600 31120086
8.200 31120087
10.500 31120088
AT 122 2.000 31220085
3.000 31220086
4.000 31220087
AT 135 5.000 31350126
7.500 31350127
10.000 31350128
AT 204 5.000 32040186
8.500 32040187
Further volumes on request
e.g. AQUA’TERNE 112, 5.600 litres
21 3 4 5
| 13 |
For filter function see p. 16
House package 2 | up to 350 m² roof area
Rainwater | Complete Packages
© H
alga
n P
ty L
td 2
014
4
applicationsPressure pumps –
schools, public areas – security
Rainwater Management
© H
alga
n P
ty L
td 2
014
5
Septic tanks – Sewerage treatment
with baffles
Gross Pollution Trap
Vertical Pump Stations
© H
alga
n P
ty L
td 2
014
6
specificationsSizes and weight
• For underground installation and above ground
• Available in volumes from 5.000 to 52.500 litres
• Double-walled – especially robust
• Components completely pre-assembled
• Available in three equipment variants (• Made of HDPE – lower weight than concrete and steel
• Food-safe material
• Maximum load: can be driven over by a truck (SLW 30 – 11,5 tons axle load) - drivable cover (see p. 15)
• Groundwater-stable up to body centre
• Available with additional access manhole as inspection shafts from to 8.500 litres up-wards
• Intermediate sizes and inflows and outflows in DN 150 to DN 300 on request
• Tank optionally couple able lengthways and sideways on request
• Also available as a retention cistern – retention regulator
• 10 years guarantee on the tank body
© H
alga
n P
ty L
td 2
014
7
HALGAN INSTALLATION INSTRUCTIONS – AQUA STORAGE TANKS
1
Rainwater storage tank for volumes from 5,000-52,500 litres
Please read carefully & adhere to the installation instructions! (In case of multiple combinations- take note of extra instructions!) Dear customer, Congratulations on the purchase of your Halgan AQUA 204 tanks. Your AQUA 204 is a storage tank made from HDPE in the extrusion blow-form method for the storage and usage of rainwater. Before installing, please check for signs of damage and that the accessories are all complete. Installation should be carried out by a suitably qualified specialist company.
Scope of delivery / Equipment Minimum one Halgan AQUA 204 assembled as tank as: Screw-on tower shaft (Ø = 756mm) with
connection possibilities (2x adapters and 2x muffs DN 100) and seals, accessible cover(green) as well as child safety lock
Quiet inlet DN 10 Overflow outlet connection DN 100 with
siphon and small animal protection Optional swimming outlet pipe 1” Optional with integrated fine filter Installation instructions, warranty certificate
and product quality acceptance protocol
All dimensions in mm Inlet for model with filter (DN 100) // Inlet for model without filter (DN 100) // Overflow (DN 100)
Volume Length Width Height without tower Height with tower Weight
HALGAN INSTALLATION INSTRUCTIONS – AQUA STORAGE TANKS
1
Rainwater storage tank for volumes from 5,000-52,500 litres
Please read carefully & adhere to the installation instructions! (In case of multiple combinations- take note of extra instructions!) Dear customer, Congratulations on the purchase of your Halgan AQUA 204 tanks. Your AQUA 204 is a storage tank made from HDPE in the extrusion blow-form method for the storage and usage of rainwater. Before installing, please check for signs of damage and that the accessories are all complete. Installation should be carried out by a suitably qualified specialist company.
Scope of delivery / Equipment Minimum one Halgan AQUA 204 assembled as tank as: Screw-on tower shaft (Ø = 756mm) with
connection possibilities (2x adapters and 2x muffs DN 100) and seals, accessible cover(green) as well as child safety lock
Quiet inlet DN 10 Overflow outlet connection DN 100 with
siphon and small animal protection Optional swimming outlet pipe 1” Optional with integrated fine filter Installation instructions, warranty certificate
and product quality acceptance protocol
All dimensions in mm Inlet for model with filter (DN 100) // Inlet for model without filter (DN 100) // Overflow (DN 100)
Volume Length Width Height without tower Height with tower Weight
Volume|l L × B × H|mm Weight|kg Article no.
530 780 × 780 × 1.070 25 9000803
750 780 × 780 × 1.480 29 9000804
1.050 780 × 780 × 1.985 41 9000805
Basic connection kit
Article no. 9000496
Piping pit for connecting two or the first two
tank, including 2” drain tap
AQUA’VARIO
• For installation above ground indoors and outdoors
• Green colour
• Made of HDPE
• UV-stabilised
• Frostproof tank body
• 400 mm manhole with screw cover
• Carrying handles
• Two 2” ventilation pipes (inflow and discharge options)
• 2” base outflow and connection option
• Two year guarantee on the tank body
Extended connection kit
Article no. 9000499
Piping set for connecting the third tank
onwards
2” drain tap
Article no. 9000501
Rainwater | Tanks| 18 |
© H
alga
n P
ty L
td 2
014
8
installationIn addition, the floor of the pit, which must
be free from stones and other sharp-edged
objects, be prepared as flat, level load-carrying
surface. We recommend laying a sand bed with
grain size of approx. 5-10mm.
Attention: if the pit floor is not strong enough,
then an approx. 10cm reinforced lean concrete
floor (D drawing 2) is to be cast. Where the
floor is badly-drainable (clay), then suitable &
sufficient drainage has to be provided!
The tank is to be lifted with at least 2 lifting straps (not in scope of supply) and suitable lifting
machinery (crane, excavator) and to be lowered into the pit evenly.
After positioning and connecting, the tank is to be filled with water to 2/3 full (volume).
Now, the space between tank and pit wall is filled with sand up to the height along the
length of the inlet/outlet connections by washing-in the sand (C drawing 2). This must be
performed manually.
© H
alga
n P
ty L
td 2
014
9
Important Instructions
• Halgan AQUA 204 tanks are designed to take the weight of 11.5 tons axle load limit when all installation conditions are adhered to.
• The tower with cover is only built to carry persons and has to have a separate cover for heavier downward loads.
• Installation in areas subject to flooding & groundwater is only permitted when the level of water does not exceed the height of the middle of the tank. This can, among others, lead to damage to the tank.
• In areas of heavy, clay-like soils, the installation is only permitted when there is sufficient drainage underneath the body of the tank.
• The Halgan AQUA 204 is designed for installation inside level ground. Where the ground inclines more than 8°, then a Civil engineer should be consulted.
• Back material may only be compacted by hand-driven vibrating / compacting equipment
© H
alga
n P
ty L
td 2
014
10
transport
Big Requirements Great Solutions
Easy to
EASY TO CLEANImproved and easy cleaning
- Thanks to smooth inner wall
EASY TO HANDLE• Low weight
• Simple installation
ALL INCLUSIVE• Accessories included – completely fitted
• Fast installation and maintenance
GREEN PRODUCTION• CO2-friendly
• Manufacturing processes without gas and oil
Your benefits ...| 2 |
E AS Y
TO CLEAN
GR
EE
N
P R O D U C T I O N
EA
SY
T O H A N D L E
A L L
I NC L U
S I VE
© H
alga
n P
ty L
td 2
014
11
Big Requirements Great Solutions
© H
alga
n P
ty L
td 2
014
12
halgan pty ltdhalgan.com.au
DisclaimerWhilst all care has been taken in compiling this information and it is
provided in good faith, it is not to be relied on as a substitute forprofessional advice. Halgan Pty Ltd accepts no responsibility for theaccuracy, completeness or timeliness of the information. For more
information contact your Halgan Pty Ltd
Halgan Pty LtdABN 69 064 448 157
22 Ethel Avenue Brookvale NSW 2100PO Box 255 Collaroy NSW 2097
Freecall: 1800 626 753Ph: Sydney 02 9972 1355
Fax: 02 9972 1455Email: [email protected]