h20 wall - bailibaili.ae/wp-content/uploads/2017/03/h20wallcolumnformwork.pdfh20 wall &column...
TRANSCRIPT
H20 Wall &Column Formwork System
11
H20 Wall &Column Formwork System
This system is considered using plywood fixed to H20 wooden girders, supported by steel walers and the associated accessories.
This is the most common system used for column and wall production. Walkways and lifting brackets allow for good access and safe movement of panels throughout the site using tower cranes.
Introduction
H20 Wall &Column Formwork System
13
The basis of the H20 Wall & Column Formwork System is the H20 Timber Beam. The H20 Timber Beam is made of the highest quality with competitive advantages.
The H20 Timber Beam is sturdy, easy to handle and only weights 4.70 kg/m. It provides a high load-bearing capacity even for great distance of walers.
This advances results to less anchor points. The project oriented design and arrangements of the H20 Timber Beam elements allow choices of various types of the plywood sheet. Furthermore, the system allows an optimum and flexible arrangement of tie positions.
The H20 Wall & Column Formwork elements are assembled quickly and easily by connecting the H20 Timber Beams to the Walers by means of Timber Beam connector done as easily as the erection of the system.
The advantage is that the H20 Wall & Column Formwork and easy re-assembling when ground plans of the structure change frequently.
The H20 Wall & Column Formwork System is one of
Characteristicsthe most economical alternatives to steel framework panel system when it comes to complicated designs and numerous non-typical applications with the same wall heights.
The H20 Wall & Column Formwork System is used for all types of walls and columns and has high rigidity and stability at a relatively low weight.
WALL FORMWORK SYSTEM
14
Assembling in site, flexible application.
Light weight, easy transportation and storage.
◇
◇
①
②
③
④
⑤
H20 Wall &Column Formwork System
15
Accessories
8.93
11.52
12.46
13.63
15.51
16.92
18.33
21.15
23.03
27.73
0.74
0.88
0.9
4.65
4.84
02160101
02160102
02160103
02160104
02160105
02160106
02160107
02160108
02160109
02160110
02160201
02160202
02160203
02160300
02160400
H20 Beam 190 cm
H20 Beam 245 cm
H20 Beam 265cm
H20 Beam 290cm
H20 Beam 330cm
H20 Beam 360cm
H20 Beam 390cm
H20 Beam 450cm
H20 Beam 490cm
H20 Beam 590cm
parameter
For steel waling
[10~[12
[14
[16
H20
H20
For connecting
timber beam to
steel waling.
For lifting the Formwork.
For connecting the
beams.
Timber Beam
Timber Beam Connector
Lifting Hook
Timber Beam Connecting Plate
Remarks Weight(Kg) Item No. Spec. & tech. parameter
Remarks Weight(Kg) Item No. Spec. & tech. parameter
Remarks Weight(Kg) Item No. Spec. & tech. parameter
Remarks Weight(Kg) Item No. Spec. & tech. parameter
WALL FORMWORK SYSTEM
16
13.58
10.64
10.74
16.08
9.16
9.48
12.82
7.38
8.5
7.3
13.52
02160500
02160701
02160702
02160703
02160801
02160802
02160803
02160601
02160602
02160603
02160604
Install on the Timber beam.
[10 425*850
[12 620*620
[14 730*730
[10
[12
[14
[10 L=869
[12 L=980
[12 L=820
[14 L=1220
Used for forming as
inner Corner with
Length adjustments
in Combination with
Connecting Pin.
Used for the
arrangement of
polygonal element
Connections.
Used to Connect two Panels and also it joins two walers Length wise to from longer One.
Right Angle Connecting Plate
Articulated or Swivel Connecting Plate
Straight Connecting Plate
Scaffold Bracket
Remarks Weight(Kg) Item No. Spec. & tech. parameter
Remarks Weight(Kg) Item No. Spec. & tech. parameter
Remarks Weight(Kg) Item No. Spec. & tech. parameter
Remarks Weight(Kg) Item No. Spec. & tech. parameter
H20 Wall &Column Formwork System
17
2.302.20
0216090102160902
[12 -[16[10
To be attached to the walers by means of Connecting pin at the end of the wall element for bracing and stiffening the outer corner.
Angle Tie Bracket
Wedge Pins
PVC Pipe Plug
PVC Joint
0.0080.008
0.0040.004
0216090102160902
0216160102161602
Φ21.5Φ27.5
Φ26/Φ22Φ31/Φ28
0.59 02161300 Used for various types of Connections.
Remarks Weight(Kg) Item No. Spec. & tech. parameter
Remarks Weight(Kg) Item No. Spec. & tech. parameter
Remarks Weight(Kg) Item No. Spec. & tech. parameter
Remarks Weight(Kg) Item No. Spec. & tech. parameter
WALL FORMWORK SYSTEM
18
0.004
0.350.62
02161700
6600001166000012
Φ26
D20 D16
Other size can also be supplied as required.
For tie-rod D20,galvanized;D16,galvanized.
PVC Pipe Plug
Wing Nut
Scaffold Bracket
13.75 02161800 Equipped with upper U-profile where wooden beams on tope can be fasten by nails,further more,the bracket is built in with handrial post.
Remarks Weight(Kg) Item No. Spec. & tech. parameter
Remarks Weight(Kg) Item No. Spec. & tech. parameter
Remarks Weight(Kg) Item No. Spec. & tech. parameter
H20 Wall &Column Formwork System
19
Steel Waler
Steel Waler(the length is various)
Right angle Steel Waler
10.8517.4414.4734.8828.9466.54
9.814.719.624.529.439.249.058.873.598.0
30.02
021620010216200202162003021620040216200502162006
02162301021623020216230302162304021623050216230602162307021623080216230902162310
02162100
[12 L=900[14 L=1200[12 L=1200[14 L=2400[12 L=2400[14 L=4800
2[10-5002[10-7502[10-10002[10-12502[10-15002[10-20002[10-25002[10-30002[10-37502[10-5000
[10
Walers are Connected by means of waler Connectors which provide a tension and pressure resistant element Connection. The element connections are tight and precisely aligned.
Walers are Connected by means of waler Connectors which provide a tension and pressure resistant element Connection. The element connections are tight and precisely aligned.
Remarks Weight(Kg) Item No. Spec. & tech. parameter
Remarks Weight(Kg) Item No. Spec. & tech. parameter
Remarks Weight(Kg) Item No. Spec. & tech. parameter
WALL FORMWORK SYSTEM
20
Pull-Push Prop
36.73 02162400 [10 [12 [14
0.370.741.32
1.782.984.472.678.9513.4217.6
660000916600009266000093
66000081660000826600008366000084660000856600008866000089
60X120100x100120x120
D16 L=1000D20 L=1000D20 L=1500D16 L=1500D20 L=3000D20 L=4500D20 L=5900
Used for stopenand other tying and connecting purposed with a max. permissible load of 90 KN.
Tie Rod D16 with max permissible load of 90 KN.Tie Rod D20 with max permissible load of 120 KN.
With adjustable lengths and used to plumb the panel and provide support against uplift and wind force.
Counter Plate
Tie Rod
Remarks Weight(Kg) Item No. Spec. & tech. parameter
Remarks Weight(Kg) Item No. Spec. & tech. parameter
Remarks Weight(Kg) Item No. Spec. & tech. parameter