h single head pumps in-line electronic control

12
H 70 640 0 /h 3 m Qm SIE BV/ED SIE BV/ED 1 Pumps designed to circulate cold or hot water free from abrasive residues in heating, hot domestic supply water, cold and iced water systems and irrigation systems. If additives are used, such as glycol or oil, check that the seals are suitable and whether or not the flow rate needs to be adjusted (for a glycol volume of upwards of 10%). • Approved fluids : - Heating water to VDI 2035 - Service water - chilled/condenser water - Water/glycol-mixtures 1) - Heat transfer fluids* - Other media on request* Performance Speed 1100-2900 rpm. Infinitely-variable speed control. * Special design at extra cost 1) Applies to 20 - 40 % vol. glycol content and up to 40° C fluid temperature oPerAting limits Flow rates up to : 640 m 3 /h Head up to : 70 m Max. discharge pressure : 13 bar up to +140°C 16 bar up to +120°C Temperature range : –20° à +140°C Max. ambient temperature : +40°C Flanges ND : 40 à 200 APPliCAtions AdVAntAges •energY sAVings - Pumps duty point optimization. -Up to 50% energy savings compare to standard pumps. •noise Control -Whistling and noise elimination at ther- mostatic valves. Automatic speed adap- tation for comfort needs. •reliABilitY -the working principle is fully automatic and doesn’t require any maintenance/ venting of the sensor. -electronic module fitted with a non- volatile memory for data storage in case of electricity shortage. Protection enclo- sure iP 54 for motor + module in case of dust and humid surrounding. •simPliCitY -Fully automatic working. SINGLE HEAD PUMPS IN-LINE ELECTRONIC CONTROL Heating - Air conditioning S.H.W. 50 et 60 Hz N.T. N° 124-10/ENG. - Ed.4/04-08 EVS

Upload: others

Post on 03-Nov-2021

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: h SINGLE HEAD PUMPS IN-LINE ELECTRONIC CONTROL

H

70

6400 /h3

m

Qm

S I E BV/ED

SIE BV/ED

1

Pumps designed to circulate cold or hot water free from abrasive residues in heating, hot domestic supply water, cold and iced water systems and irrigation systems.If additives are used, such as glycol or oil, check that the seals are suitable and whether or not the flow rate needs to be adjusted (for a glycol volume of upwards of 10%).

•  Approved fluids :- Heating water to VDI 2035 - Service water - chilled/condenser water

- Water/glycol-mixtures1)

- Heat transfer fluids*- Other media on request*PerformanceSpeed 1100-2900 rpm.Infinitely-variable speed control.

* Special design at extra cost1) Applies to 20 - 40 % vol. glycol content

and up to 40° C fluid temperature

oPerAting limitsFlow rates up to : 640 m3/hHead up to : 70 mMax. discharge pressure : 13 bar up to +140°C   16 bar up to +120°CTemperature range : –20° à +140°CMax. ambient temperature : +40°CFlanges ND : 40 à 200

APPliCAtions

AdVAntAges

• energY sAVings-  Pumps duty point optimization. -  Up  to 50% energy savings compare  to standard pumps.

•  noise Control-  Whistling and noise elimination at  ther-mostatic valves. Automatic speed adap-tation for comfort needs.

•  reliABilitY-  the working principle is fully automatic and  doesn’t  require  any maintenance/venting of the sensor.-  electronic module fitted with a   non-volatile memory for data storage in case of electricity shortage. Protection enclo-sure iP 54 for motor + module in case of dust and humid surrounding. 

•  simPliCitY-  Fully automatic working.

SINGLE HEAD PUMPSIN-LINE ELECTRONIC CONTROL

Heating - Air conditioningS.H.W.

50 et 60 Hz

N.T. N° 124-10/ENG. - Ed.4/04-08

EVS

Page 2: h SINGLE HEAD PUMPS IN-LINE ELECTRONIC CONTROL

SIE BV/ED

2

design•  Hydraulic part- In-line single-stage low pressure centrifugal pump with suction and discharge flanges of the same nominal diameter, with an air-cooled motor. NP 16 holed flanges compliant with EN 1092-2. G 1/8 pressure gauge cou-plings used for the built-in differential pres-sure sensor (BV version).

- Pumps with cast-on supports for optional base mounting, designed for max. working pressure of 16 bars.

- Pump shaft and motor shaft are connected by a clamp coupling. Pump housing and impeller are in cast iron.

- The mechanical seal does not require main-tenance and is independent of the rotation direction. It is suitable for pure water of a tem-perature up to 140°C and water/glycol mixtures of a volume up to 40% and a maximum tempe-rature of 40°C.

- Special seals and sealing materials are available for other uses.

• motor protection- Integrated full overload protection by PTCthermal sensor in all stator windings.IP 54 - Class F.

•  mains power supply3~400 V, 50 Hz 3~380 V, 60 Hz

•  motor- Three-phase squirred cage electric motor- Integrated thermistor sensors (thermistor)Protection index : IP 54Insulating category : 155 (F)EMC Emission : EN 61800-3

Immunity : EN 61800-3

The standard model complies with the limit values in the first environment, with restricted distribution only;

Filter for unrestricted distribution class accor-ding to IEC EN 61800-3 class B1, for base mounting.*

• Protection differential (Fi)-Selective “all current” FI differential circuit breakers are permitted (> 300 mA trip rating).Ident. mark: FI

stAndArd ConstrUCtionmain parts material

Pump casing EN-GJL 2503)

Impeller EN-GJL 2004)

G-CuSn 5*Lantern EN-GJL-2503)

Shaft 1,4122/X39CrMo17-1Mechanical seal Graphite/Si carbide/EP* Other mechanical seals 2) on demand.

identiFiCAtionsie 2 06 - 17/11 BV ed

SIE : pump code

2 pole motor

Nominal dia. of ports in cm

Nominal dia. of impeller in cm

Rated power in

Basis functions

Without differential pressure sensors allowing the external adjusting of the setpoint

instAllAtionIn-line pumps series SIE…BV/ED are desi-gned for a direct pipe mounting with motor upwards (all types) or motor horizontal (≤ 15 kW). Motor or module facing downwards is not allowed. Keep a sufficient space to remove easily the motor, in case of maintenance.

mounting positions- Pipe supported- Brackets or base mounted*Flanges PN 16/EN 1092-2

* Special design at extra cost1) Applies to 20 - 40 % vol. glycol content and up to 40° C fluid temperature2) Applicable for water/glycol mixtures differing from those referred in 1) 3) Previously Ft 25, corrosion proof4) Previously Ft 20

nBNPSH curves shown are based on tested data. A safety margin of not less than 0.5 m should be added.

FeAtUres•  PackagingThe pump, the packaging and the assem-bly and instruction manual are included as standard.

•  Accessories- Support brackets for base mounting- Filter for unrestricted distribution class according to IEC 61800-3, class B1.

PUmP eQUiPment

•  Pump equipment sie...BV- Pump integrated ∆p-c mode for constant head control, with differential pressure sensor.

- Manual setting of the speed (touch pads integrated)- External ON/OFF,- Collective Fault signal (pot. free contacts),- Collective Run signal (pot. free contacts),- LED : mains on pump running fault - Reset” button (Fault eliminated)

•  Pump equipment sie...ed

- External drive of the pump, from a BMS, without integrated differential pressure sensor,

- External setting of the speed (through an analogous signal 0 - 10 V or 4 - 20 mA),

- ∆ P or variable through an external sen-sor (not supplied) and analogous signal (0 - 10 V or 4 - 20 mA),

- External ON/OFF,- Collective Fault signal (pot. free contacts),- Collective Run signal (pot. free contacts),- LED : mains on pump running reset button - “Reset” button (Fault eliminated)

Page 3: h SINGLE HEAD PUMPS IN-LINE ELECTRONIC CONTROL

1.2

8

1.11

1.12

1.21

1.14

1.41.111.121.14

1.41

1.42

1.5

674

5

2

9

1.11

1.12

1.3

1

1.14

1.31

1.32

1.33

1.1

1.11

1.14

3.1

1.12

1.13

1.14

3

SIE BV/ED

3

desCriPtion VieW

1. Complete exchange batch 1.1 Hydraulic kit with 1.11 Nut 1.12 Washer 1.13 Impeller 1.14 O-ring 1.2 Kit mechanical seal with 1.21 Complete mechanical seal 1.3 JLantern kit parts with 1.31 Bleed screw 1.32 Coupling protector 1.33 Lantern 1.4 Kit shaft with 1.41 Shaft 1.42 Spring stop cellar 1.5 Complete coupling2. motor3. Complete pump casing kit with 3.1 Pump casing 3.2 Stopper for pressure ports4. mounting screw for lantern/pump5. mounting screw for motor/lantern6. nut for motor/lantern mounting7. Washer for motor/lantern mounting8.  differential pressure sensor with pipe (version BV).

9. motor module

Page 4: h SINGLE HEAD PUMPS IN-LINE ELECTRONIC CONTROL

L1 L2 L3 PE PE SBM

0 - 10V/ 0...10V GND +24V DC Ext. off0...20 mA

SSM

2 3 4 10 14

2

4

6

8

10

12kW

Qm3/h

Imp gpm

5040302010 60 70 80 90 100

5002500 1000 1250 150075010 14 18 22 2420 6

0 Qm3/hQI/minQI/s

50403020100 60 70 80 90 100

100 150 200 250 300 350500

m

NPSH8

4

0

sie 206-17/11 BVdn 65

34 m

28 m

20 m 14 m 8 m

Hm

0

5

10

15

20

25

30

35

40

NPSH

max.

SIE BV/ED

4

FUnCtions CHArt sie...BV/edFunction single head pumps sie...BV single head pumps sie...edmains power3~400V, ± 10%, 50 Hz • •3~380V, ± 6%, 60 Hz • •Manual functionAdjusting of the differential pressure setpoint • —Speed selection (manual control) • —Automatic functionInfinitely variable speed control ∆ p-c • —Speed setting • —Full motor protection with trip function • •Remote controlled functionExternal setting of the speed via “0 ... 10V” or “0 - 20 mA” signal — •External setting of the differential pressure via “0 ... 10V” or “0 - 20 mA” signal — •Input of the measured differential pressure from an external sensor via “0 ... 10V1)” signal • •

External On/Off • •Signal and display functionCollective Run signal volt-free contacts • •Collective Faults signal volts-free contacts • •Fault light • •

Wiring diAgrAm

Three-phase motor 3~400V, 50Hz/380V, 60 Hz

Switch rating of volt-free contacts for collective Run and Fault signals : - min. 12 V DC/ 10 mA - max. 250 V AC/1 A L1, L2, L3, PE : Power supplied 3~400V - 50 Hz

3~380V - 60 Hz SBM : Volt-free common Run signal SSM : Volt-free common Fault signal 2 : Analogue input (0-10 V ou 4-20 mA) for duty point 3 : Analogue input (0-10 V) for diff. pressure 4 : Sensor/analogue signal ground 10 : Analogue output (24V) for external use 14 : Ext.-Off : remote on/off

Curves 2900 rpm | ∆ p-c (constant)

1) For SIE..ED, an external sensor has to be foreseen (not supplied with the pump).

Page 5: h SINGLE HEAD PUMPS IN-LINE ELECTRONIC CONTROL

SIE 204-22

SIE205-21

SIE 205-22

SIE 206-22

SIE206-20SIE

206-17

SIE206-21

SIE208-16

SIE208-17

SIE208-19

SIE208-20

SIE210-14.5

SIE210-15

SIE210-16

SIE210-16.5

SIE415-26

SIE410-27

SIE415-22

SIE415-25

SIE415-27

SIE420-24

SIE420-25

SIE420-26

SIE 204-22

SIE205-21

SIE 205-22

SIE 206-22

SIE206-20SIE

206-17

SIE206-21

SIE208-16

SIE208-17

SIE208-19

SIE208-20

SIE210-14.5

SIE210-15

SIE210-16

SIE210-16.5

SIE415-26

SIE410-27

SIE415-22

SIE415-25

SIE415-27

SIE420-24

SIE420-25

SIE420-26

0

10

20

30

40

50

60

70

H m

0 100 200 300 400 500 Q m³/h

SIE-BV/ED

SIE BV/ED

5

generAl PreseleCtion grAPHs - 2 Pole - 50Hz

Page 6: h SINGLE HEAD PUMPS IN-LINE ELECTRONIC CONTROL

0 10 20 30 40 50 60 70 80 90

0 10 20 30 40 50 60 70 80 90

40

35

30

25

20

15

10

5

0

0 4 8 12 16 20 24 Q l/s

8 6 4 2 0

1086420

SIE 206-17/11-BVDN 65

max.

max.

∆ p-cN

PSH

m

Q m³/h

Q m³/h

H m

P1kW

8 m14 m20 m

28 m

0 10 20 30 40 50 60 70 80 90

0 10 20 30 40 50 60 70 80 90

40

35

30

25

20

15

10

5

0

0 4 8 12 16 20 24 Q l/s

8 6 4 2 0

1086420

SIE 206-17/11-BVDN 65

max.

max.

∆p-cN

PSH

m

Q m³/h

Q m³/h

H m

P1kW

8 m14 m20 m

28 m

SIE 204-22/11-BVDN 40 ∆p-c

max.

max.

10m20m26m

34m41m

48m55m

0

10

20

30

40

50

60

H m

0 10 20 30 40 50 Q m³/h

0

10

20

NPS

H m

0 2,5 5,0 7,5 10,0 12,5 Q l/s 0 50 100 150 Q Igpm

02468

1012

P1kW

0 10 20 30 40 50 Q m³/h

SIE 204-22/11-BVDN 40 ∆p-c

max.

max.

10m20m26m

34m41m

48m55m

0

10

20

30

40

50

60

H m

0 10 20 30 40 50 Q m³/h

0

10

20

NPS

H m

0 2,5 5,0 7,5 10,0 12,5 Q l/s 0 50 100 150 Q Igpm

02468

1012

P1kW

0 10 20 30 40 50 Q m³/h

36m

10m

max.

27m18m

SIE 205-21/11-BVDN 50

45m

∆p-c max.

0

10

20

30

40

50

H m

0 10 20 30 40 50 60 Q m³/h

0

10

20

NPS

H m

0 2,5 5,0 7,5 10,0 12,5 15,0 17,5 Q l/s 0 50 100 150 200 Q Igpm

02468

1012

P1kW

0 10 20 30 40 50 60 Q m³/h

36m

10m

max.

27m18m

SIE 205-21/11-BVDN 50

45m

∆p-c max.

0

10

20

30

40

50

H m

0 10 20 30 40 50 60 Q m³/h

0

10

20

NPS

H m

0 2,5 5,0 7,5 10,0 12,5 15,0 17,5 Q l/s 0 50 100 150 200 Q Igpm

02468

1012

P1kW

0 10 20 30 40 50 60 Q m³/h

SIE 205-22/15-BVDN 50

10m

max.

20m27m

48m55m

0

10

20

30

40

50

60

H m

0 10 20 30 40 50 60 70 Q m³/h

0

10

20

NPS

H m

0 5 10 15 20 Q l/s 0 100 200 Q Igpm

0

5

10

15

P1kW

0 10 20 30 40 50 60 70 Q m³/h

∆p-c max.

SIE 205-22/15-BVDN 50

10m

max.

20m27m

41m48m

55m

0

10

20

30

40

50

60

H m

0 10 20 30 40 50 60 70 Q m³/h

0

10

20

NPS

H m

0 5 10 15 20 Q l/s 0 100 200 Q Igpm

0

5

10

15

P1kW

0 10 20 30 40 50 60 70 Q m³/h

∆p-c max.

SIE BV/ED

6

HYdrAUliC PerFormAnCe - 2 Pole - 50Hz

Page 7: h SINGLE HEAD PUMPS IN-LINE ELECTRONIC CONTROL

11m

max.

22m28m36m

43m49m

56m

SIE 206-22/22-BVDN 65

0

10

20

30

40

50

60

70

H m

0 20 40 60 80 100 Q m³/h

0

5

10

NPS

H m

0 5 10 15 20 25 Q l/s0 100 200 300 Q Igpm

05

101520

P1kW

0 20 40 60 80 100 Q m³/h

∆p-c max.

11m

max.

22m28m36m

43m49m

56m

SIE 206-22/22-BVDN 65

0

10

20

30

40

50

60

70

H m

0 20 40 60 80 100 Q m³/h

0

5

10

NPS

H m

0 5 10 15 20 25 Q l/s0 100 200 300 Q Igpm

05

101520

P1kW

0 20 40 60 80 100 Q m³/h

∆p-c max.

SIE 206-21/18.5-BVDN 65

42m33m

50mmax.

16m9m

25m

0

10

20

30

40

50

60

H m

0 20 40 60 80 100 Q m³/h

0

5

10

NPS

H m

0 5 10 15 20 25 Q l/s 0 100 200 300 Q Igpm

0

5

10

15

P1kW

0 20 40 60 80 100 Q m³/h

max.

SIE 206-21/18.5-BVDN 65

42m33m

50mmax.

16m9m

25m

0

10

20

30

40

50

60

H m

0 20 40 60 80 100 Q m³/h

0

5

10

NPS

H m

0 5 10 15 20 25 Q l/s 0 100 200 300 Q Igpm

0

5

10

15

P1kW

0 20 40 60 80 100 Q m³/h

max.

∆p-c

0 20 40 60 80 100 120

30

25

20

15

10

5

0

0 5 10 15 20 25 30 35

8 6 4 2 0

1086420

SIE 208-16/11-BVDN 80

26 m

8 m

max.

max.

∆p-c

14 m18 m22 m

0 20 40 60 80 100 120

NPS

H m

H m

P1kW

Q m³/h

Q l/s

Q m³/h

0 20 40 60 80 100 120

30

25

20

15

10

5

0

0 5 10 15 20 25 30 35

8 6 4 2 0

1086420

SIE 208-16/11-BVDN 80

26 m

8 m

max.

max.

∆p-c

14 m18 m22 m

0 20 40 60 80 100 120

NPS

H m

H m

P1kW

Q m³/h

Q l/s

Q m³/h

0

10

20

30

40

50

H m

0 20 40 60 80 100 Q m³/h

0

5

10

NPS

H m

0 5 10 15 20 25 Q l/s 0 100 200 300 Q Igpm

0

5

10

15

P1kW

0 20 40 60 80 100 Q m/h

∆p-c max.

SIE 206-20/15-BVDN 65

9m17m

max.

24m30m35m

42m

0

10

20

30

40

50

H m

0 20 40 60 80 100 Q m³/h

0

5

10

NPS

H m

0 5 10 15 20 25 Q l/s 0 100 200 300 Q Igpm

0

5

10

15

P1kW

0 20 40 60 80 100 Q m/h

∆p-c max.

SIE 206-20/15-BVDN 65

9m17m

max.

24m30m35m

42m

SIE BV/ED

7

HYdrAUliC PerFormAnCe - 2 Pole - 50Hz

Page 8: h SINGLE HEAD PUMPS IN-LINE ELECTRONIC CONTROL

40

35

30

25

20

15

10

5

0

8 6 4 2 0

14121086420

SIE 208-19/18.5-BVDN 80

0 20 40 60 80 100 1200 5 10 15 20 25 30 35

0 20 40 60 80 100 120

NPS

H m

max.

14 m22 m

30 m

H m

P1kW

Q l/s

Q m³/h

Q m³/h

max.

∆p-c

36 m

8 m

40

35

30

25

20

15

10

5

0

8 6 4 2 0

14121086420

SIE 208-17/15-BVDN 80

0 20 40 60 80 100 1200 5 10 15 20 25 30 35

0 20 40 60 80 100 120

NPS

H m

max.

14 m22 m

30 m

H m

P1kW

Q l/s

Q m³/h

Q m³/h

max.

∆p-c

36 m

8 m

40

30

20

10

0

12

8

4

0

161412840

max.

max.

SIL 208-19/18,5-BVDN 80

0 40 80 120 160 0 8 16 24 32 40 48

0 40 80 120 160

NPS

H m

Q l/s

Q m³/h

Q m³/h

∆p-cH m

P1kW

36 m30 m24 m18 m

8 m

40

30

20

10

0

12

8

4

0

161412840

max.

max.

SIE 208-19/18,5-BVDN 80

0 40 80 120 160 0 8 16 24 32 40 48

0 40 80 120 160

NPS

H m

Q l/s

Q m³/h

Q m³/h

∆p-cH m

P1kW

36 m30 m24 m18 m

8 m

50

40

30

20

10

0

12

8

4

0

15

10

5

09 m

max.

max.

SIE 208-20/22-BVDN 80

0 40 80 120 160 0 8 16 24 32 40 48 Q l/s

0 40 80 120 160 Q m³/h

Q m³/h

NPS

H m

∆p-c

H m

P1kW

18 m24 m

30 m

42 m

36 m

50

40

30

20

10

0

12

8

4

0

15

10

5

09 m

max.

max.

SIE 208-20/22-BVDN 80

0 40 80 120 160 0 8 16 24 32 40 48 Q l/s

0 40 80 120 160 Q m³/h

Q m³/h

NPS

H m

∆p-c

H m

P1kW

18 m24 m

30 m

42 m

36 m

20

16

12

8

4

0

8

4 0

1086420

15 m

max.

max.

5 m8 m

12 m

SIE 210-14.5/11-BVDN 100

0 40 80 120 160 2000 10 20 30 40 50 Q l/s

18 m

0 40 80 120 160 200 Q m3/h

Q m3/h

NPS

H m

∆p-c

H m

P1kW

20

16

12

8

4

0

8

4 0

1086420

15 m

max.

max.

5 m8 m

12 m

SIE 210-14.5/11-BVDN 100

0 40 80 120 160 2000 10 20 30 40 50 Q l/s

18 m

0 40 80 120 160 200 Q m3/h

Q m3/h

NPS

H m

∆p-c

H m

P1kW

SIE BV/ED

8

HYdrAUliC PerFormAnCe - 2 Pole - 50Hz

Page 9: h SINGLE HEAD PUMPS IN-LINE ELECTRONIC CONTROL

24

20

16

12

8

4

0

8 6 4 2 0

12

8

4

0

max.

max.

SIE 210-15/15-BVDN 100

0 40 80 120 160 200

0 40 80 120 160 200

0 10 20 30 40 50 Q l/s

Q m3/h

Q m3/h

NPS

H [m

]

∆p-cH m

P1kW

5 m10 m14 m18 m22 m

24

20

16

12

8

4

0

8 6 4 2 0

12

8

4

0

max.

max.

SIE 210-15/15-BVDN 100

0 40 80 120 160 200

0 40 80 120 160 200

0 10 20 30 40 50 Q l/s

Q m3/h

Q m3/h

NPS

H [m

]

∆p-cH m

P1kW

5 m10 m14 m18 m22 m

∆p-c

0 40 80 120 160 200

0 40 80 120 160 200

30

25

20

15

10

5

0

0 8 16 24 32 40 48 56 64 Q l/s

1612 8 4 0

1612

840

SIE 210-16/18.5-BVDN 100

max.

max.

Q m³/h

Q m³/h

NPS

H m

P1kW

H m

24 m

6 m12 m16 m20 m

∆p-c

0 40 80 120 160 200 240

0 40 80 120 160 200 240

30

25

20

15

10

5

0

0 8 16 24 32 40 48 56 64 Q l/s

1612 8 4 0

1612

840

SIE 210-16/18.5-BVDN 100

max.

max.

Q m³/h

Q m³/h

NPS

H m

P1kW

H m

24 m

6 m12 m16 m20 m

0 50 100 150 200 250

35

30

25

20

15

10

5

0

0 10 20 30 40 50 60 70 Q l/s

1612 8 4 0

201612840

SIE 210-16.5/22-BVDN 100

max.

max.

0 50 100 150 200 250 Q m³/h

Q m³/h

NPS

H m

∆p-c

H m

P1kW

28 m

8 m12 m16 m22 m

0 50 100 150 200 250

35

30

25

20

15

10

5

0

0 10 20 30 40 50 60 70 Q l/s

1612 8 4 0

201612840

SIE 210-16.5/22-BVDN 100

max.

max.

0 50 100 150 200 250 Q m³/h

Q m³/h

NPS

H m

∆p-c

H m

P1kW

28 m

8 m12 m16 m22 m

SIE BV/ED

9

HYdrAUliC PerFormAnCe - 2 Pole - 50Hz

Page 10: h SINGLE HEAD PUMPS IN-LINE ELECTRONIC CONTROL

SIE 415-26/18,5-BVDN 150

5m

max.

7m

12m10m

15m18m

∆p-c max.

0

2,5

5

7,5

10

12,5

15

17,5

20

22,5H m

0 50 100 150 200 250 300 350 Q m³/h 0

5

10

NPS

H m

0 10 20 30 40 50 60 70 80 90 100 110 Q l/s 0 200 400 600 800 1000 1200 Q Igpm

0

5

10

15

P1 kW

0 50 100 150 200 250 300 350 Q m³/h

SIE 415-26/18,5-BVDN 150

5m

max.

7m

12m10m

15m18m

∆p-c max.

0

2,5

5

7,5

10

12,5

15

17,5

20

22,5H m

0 50 100 150 200 250 300 350 Q m³/h 0

5

10

NPS

H m

0 10 20 30 40 50 60 70 80 90 100 110 Q l/s 0 200 400 600 800 1000 1200 Q Igpm

0

5

10

15

P1 kW

0 50 100 150 200 250 300 350 Q m³/h

7m12m

max.

14m19m

0

5

10

15

20

25

H m

0 20 40 60 80 100 120 140 160 Q m³/h

0

10

20

NPS

H m

0 5 10 15 20 25 30 35 40 45 Q l/s

0 100 200 300 400 500 600 Q Igpm

02468

10

P1kW

0 20 40 60 80 100 120 140 160 Q m³/h

SIE 410-27/11-BVDN 100

∆p-c max.

7m12m

max.

14m19m

0

5

10

15

20

25

H m

0 20 40 60 80 100 120 140 160 Q m³/h

0

10

20

NPS

H m

0 5 10 15 20 25 30 35 40 45 Q l/s

0 100 200 300 400 500 600 Q Igpm

02468

10

P1kW

0 20 40 60 80 100 120 140 160 Q m³/h

SIE 410-27/11-BVDN 100

∆p-c max.

SIL 415-22/11-BVDN 150

2m

max.

∆p-c max

5m8m

11m13m

0

2,5

5

7,5

10

12,5

15

17,5

H m

0 50 100 150 200 250 Q m³/h 0

5

10

NPS

H m

0 10 20 30 40 50 60 70 80 Q l/s 0 250 500 750 1000 Q Igpm

02468

10

P1kW

0 50 100 150 200 250 Q m³/h

SIE 415-22/11-BVDN 150

2m

max.

∆p-c max

5m8m

11m13m

0

2,5

5

7,5

10

12,5

15

17,5

H m

0 50 100 150 200 250 Q m³/h 0

5

10

NPS

H m

0 10 20 30 40 50 60 70 80 Q l/s 0 250 500 750 1000 Q Igpm

02468

10

P1kW

0 50 100 150 200 250 Q m³/h

SIL 415-25/15-BVDN 150

max.

∆p-c

3m4m

7m10m

max.

12m15m

0

2

4

6

8

10

12

14

16

18H m

0 50 100 150 200 250 300 350 Q m³/h

0

5

10

NPS

H m

0 10 20 30 40 50 60 70 80 90 100 Q l/s 0 200 400 600 800 1000 1200 Q gpm

02468

101214

P1 kW

0 50 100 150 200 250 300 350 Q m³/h

SIE 415-25/15-BVDN 150

max.

∆p-c

3m4m

7m10m

max.

12m15m

0

2

4

6

8

10

12

14

16

18H m

0 50 100 150 200 250 300 350 Q m³/h

0

5

10

NPS

H m

0 10 20 30 40 50 60 70 80 90 100 Q l/s 0 200 400 600 800 1000 1200 Q gpm

02468

101214

P1 kW

0 50 100 150 200 250 300 350 Q m³/h

SIE BV/ED

10

HYdrAUliC PerFormAnCe - 4 Pole - 50Hz

Page 11: h SINGLE HEAD PUMPS IN-LINE ELECTRONIC CONTROL

SIE 415-27/22-BVDN 150

∆p-c max.

8m11m

14m17m

19m

22mmax.

5m

0

5

10

15

20

25

H m

0 50 100 150 200 250 300 350 Q m³/h

0

5

NPS

H m

0 10 20 30 40 50 60 70 80 90 100 110Q l/s 0 250 500 750 1000 1250 Q Igpm

05

101520

P1kW

0 50 100 150 200 250 300 350 Q m³/h

SIE 415-27/22-BVDN 150

∆p-c max.

8m11m

14m17m

19m

22mmax.

5m

0

5

10

15

20

25

H m

0 50 100 150 200 250 300 350 Q m³/h

0

5

NPS

H m

0 10 20 30 40 50 60 70 80 90 100 110Q l/s 0 250 500 750 1000 1250 Q Igpm

05

101520

P1kW

0 50 100 150 200 250 300 350 Q m³/h

3m7m

10m

13mmax.

∆p-c max.

SIE 420-24/15-BVDN 200

0

2

4

6

8

10

12

14

16

18H m

0 50 100 150 200 250 300 350 400 450 500 Q m³/h

0

10

20

NPS

H m

0 20 40 60 80 100 120 140 Q l/s0 200 400 600 800 10001200140016001800 Q Igpm

0

5

10

15

P1kW

0 50 100 150 200 250 300 350 400 450 500 Q m³/h

3m7m

10m

13mmax.

∆p-c max.

SIE 420-24/15-BVDN 200

0

2

4

6

8

10

12

14

16

18H m

0 50 100 150 200 250 300 350 400 450 500 Q m³/h

0

10

20

NPS

H m

0 20 40 60 80 100 120 140 Q l/s0 200 400 600 800 10001200140016001800 Q Igpm

0

5

10

15

P1kW

0 50 100 150 200 250 300 350 400 450 500 Q m³/h

SIE 420-25/18.5-BVDN 200

∆p-c max.

4m

12mmax.

7m9m

15m

3m

0

2

4

6

8

10

12

14

16

18H m

0 50 100 150 200 250 300 350 400 450 500 Q m³/h

0

5

10

NPS

H m

0 20 40 60 80 100 120 140 Q l/s 0 200 400 600 800 10001200140016001800 Q Igpm

0

5

10

15

P1kW

0 50 100 150 200 250 300 350 400 450 500 Q m³/h

SIE 420-25/18.5-BVDN 200

∆p-c max.

4m

12mmax.

7m9m

15m

3m

0

2

4

6

8

10

12

14

16

18H m

0 50 100 150 200 250 300 350 400 450 500 Q m³/h

0

5

10

NPS

H m

0 20 40 60 80 100 120 140 Q l/s 0 200 400 600 800 10001200140016001800 Q Igpm

0

5

10

15

P1kW

0 50 100 150 200 250 300 350 400 450 500 Q m³/h

SIE 420-26/22--BVDN 200

∆p-c max.

6m

14m

11m

max.

8m

16m

0

2,5

5

7,5

10

12,5

15

17,5

20

22,5H m

0 100 200 300 400 500 Q m³/h 0

10

20

NPS

H m

0 20 40 60 80 100 120 140 160 Q l/s 0 250 500 750 1000 1250 1500 1750 2000 Q Igpm

0

5101520

P1 kW

0 100 200 300 400 500 Q m³/h

SIE 420-26/22-BVDN 200

∆p-c max.

6m

14m

11m

max.

8m

16m

0

2,5

5

7,5

10

12,5

15

17,5

20

22,5H m

0 100 200 300 400 500 600

600

Q m³/h 0

10

20

NPS

H m

0 20 40 60 80 100 120 140 160 Q l/s 0 250 500 750 1000 1250 1500 1750 2000 Q Igpm

0

5101520

P1 kW

0 100 200 300 400 500 Q m³/h

SIE BV/ED

11

HYdrAUliC PerFormAnCe - 4 Pole - 50Hz

Page 12: h SINGLE HEAD PUMPS IN-LINE ELECTRONIC CONTROL

Øg

o x pR1/8"

PG

x a

rm

l1 b2 b1 hmax

hmax

b 4

l 0

Ø18

Ød

ØK

ØD

DN

nxdL

5050

e

c

f

référence Commandea Øa1 b1 b4 hmax  c e f Øg l0 m (t) (u) x masse

O° kgSIE204-22/11-BV 110 350 145 389 296 180 172 78 258 440 190 60 195 110 181SIE205-21/11-BV 120 350 145 389 296 160 170 70 258 440 190 61 195 110 184SIE205-22/15-BV 120 350 145 417 296 160 170 70 313 440 190 61 195 110 213SIE206-17/11-BV 110 350 126 389 296 180 195 60 258 430 215 78,0 194 120 173SIE206-20/15-BV 130 350 150 417 296 200 225 50 313 475 245 70,0 195 110 220SIE206-21/18.5-BV 130 350 150 417 296 200 225 50 313 475 245 70,0 195 110 251SIE206-22/22-BV 130 350 150 439 328 200 225 50 351 475 245 70,0 195 110 283SIE208-16/11-BV 120 350 136 389 296 180 173 72 258 440 200 75,0 194 120 182SIE208-17/15-BV 120 350 136 417 296 180 173 72 313 440 200 75,0 194 120 211SIE208-19/18.5-BV 145 350 157 417 296 220 208 62 313 500 230 78,0 195 120 257SIE208-20/22-BV 145 350 157 439 328 220 208 62 351 500 230 78,0 195 120 289SIE210-14.5/11-BV 120 350 159 389 296 200 226 60 258 500 250 110 194 135 190SIE210-15/15-BV 120 350 159 417 296 200 226 60 313 500 250 110 194 135 219SIE210-16/18.5-BV 120 350 159 417 296 200 226 60 313 500 250 110 194 135 250SIE210-16.5/22-BV 120 350 159 439 328 200 226 60 351 500 250 110 194 135 282SIE410-27/11-BV 180 350 188 389 296 240 236 114 258 550 260 88 195 120 204SIE415-22/11-BV 200 350 202 389 296 260 284 116 258 700 310 113 195 130 237SIE415-25/15-BV 230 350 278 417 296 288 304 146 313 700 330 113 214 135 339SIE415-26/18.5-BV 230 350 278 417 328 288 304 146 313 700 330 113 214 135 372SIE415-27/22-BV 230 350 278 439 328 288 304 146 351 700 330 113 214 135 379SIE420-24/15-BV 245 350 281 417 296 330 270 165 313 800 370 138 214 140 400SIE420-25/18.5-BV 245 350 281 417 328 330 270 165 313 800 370 138 214 140 434SIE420-26/22-BV 245 350 281 439 328 330 270 165 351 800 370 214 441

SIE BV/ED

12

eleCtriCAl And dimensionAl CHArACteristiCs

oder referencea Øa1 b1 b4 hmax  c e f Øg l0 m (t) (u) x mass

O° kg

53, bd de la République - Espace Lumière - Bât. 6 - 78403 Chatou Cedex - FRANCE(no Indigo) sAlmson Contact : +33 (0)820 0000 44

Fax. : +33 (0)1 30 09 82 82 | www.salmson.com