h-moss wl-series wireless controls fast private office application replace wall switch with receiver...
TRANSCRIPT
![Page 1: H-MOSS WL-Series Wireless Controls FAST Private Office Application Replace wall switch with receiver switch and position sensor to "see" occupant's hands. FLEXIBLE](https://reader033.vdocuments.us/reader033/viewer/2022060718/607ec32b9592d02bf2165f82/html5/thumbnails/1.jpg)
Wiring Device-Kellems
®H-MOSS® WL-Series Wireless ControlsApplication Guide
Fast Flexible Functional
![Page 2: H-MOSS WL-Series Wireless Controls FAST Private Office Application Replace wall switch with receiver switch and position sensor to "see" occupant's hands. FLEXIBLE](https://reader033.vdocuments.us/reader033/viewer/2022060718/607ec32b9592d02bf2165f82/html5/thumbnails/2.jpg)
H-MOSS® Occupancy Sensors WL-Series Wireless Controls
*Clear Connect™ is a registered trademark of Lutron Electronics Co., Inc.
Meet Wired Controls' New Companion There are many retrofit applications where running the extra wiring
for traditional occupancy sensors is difficult or impossible. This is
where Hubbell’s WL-Series Wireless Controls shine by eliminating
sensor wiring. Deploy Hubbell’s popular wired controls where you
can and then utilize WL-Series Controls in the areas that have hard
ceilings, asbestos, or poor switch locations.
Wireless is FastThe WL-Series sensors install and setup fast. A typical installation
involves only replacing the existing wall switch and pairing the
desired battery powered sensor. These controls utilize a simplified
2-button, 6-second press and hold, commissioning procedure.
There is no need for remotes, computers, smartphones, or any other
device to setup the system.
Wireless is FlexibleThese battery operated sensors allow for painless reconfigurations
and repositioning. This benefits applications such as open office
areas, museum exhibits, and production or test lab environments.
Adding, removing, and moving sensors can easily be done by
maintenance personnel because they are battery powered,
eliminating any need for additional wiring.
Wireless is FunctionalThe WL-Series sensors are designed for ultra-low power
consumption which translates into a ten year battery life. They also
combine advanced Digital Signal Processing (DSP) with Passive
Infrared (PIR) technology to maximize sensitivity to the movement
of heat emitted from people occupying a space. Commands
are wirelessly transmitted up to 60ft. over the low interference
434MHz band to associated Clear Connect® enabled devices that
automatically turn off lights and other non essential loads.
Key Benefits• Eliminate the need to run extra wiring
• Get off the job site quickly
• Avoid asbestos mitigation issues
• Non-invasive
• Support highly reconfigured spaces
Create more complex setups easily
• Multi-way switching • Daylight harvesting • Plug controls
Easy Installation
Flexible Easily add, move or change sensors
Fast Six second press and hold setup
Functional Ten year battery life
2
S
81S
9 1516
4
T
111825
5
W
121926
6
Th
132027
222923
30
3
M
10172431
F
142128
7
3 92
10 1617
5121926
6132027
7142128
233024
31
4111825
152229
81
3 92
10 1617
5121926
6132027
7142128
233024
4111825
152229
81
2 81
9 1516
4111825
5121926
6132027
222923
30
310172431
142128
7
6 125
13 1920
81
1522
92
1623
103
1724 26
27
7142128
1825
114
7 136
14 2021
92
162330
103
172431
114
1825 27
28
81
152229
1926
125
81
147
15 2122
103
172431
114
1825
125
1926 28
29
92
162330
2027
136
6 125
13 1920
81
152229
92
162330
103
1724 26
27
7142128
1825
114
125
1992
162330
103
172431
261825
114
61320
81
15222927
7142128
103
177142128
81
152229
24162330
92
41118
613202725
5121926
114
1881
152229
92
162330
2524
103
51219
714212826
6132027
103
177142128
81
152229
2431
162330
92
41118
613202725
5121926
17
January
S ST W ThM FMay
S ST W ThM FFebruary
S ST W ThM FJune
S ST W ThM FJuly
S ST W ThM F
S ST W ThM F
August
S ST W ThM FSeptember
S ST W ThM FOctober
S ST W ThM FNovember December
S ST W ThM FMarch
S ST W ThM FApril
10+
![Page 3: H-MOSS WL-Series Wireless Controls FAST Private Office Application Replace wall switch with receiver switch and position sensor to "see" occupant's hands. FLEXIBLE](https://reader033.vdocuments.us/reader033/viewer/2022060718/607ec32b9592d02bf2165f82/html5/thumbnails/3.jpg)
www.hubbell-wiring.com
FAST Private Office ApplicationReplace wall switch with receiver switch and position sensor to "see" occupant's hands.
FLEXIBLEBreak Room ApplicationEasily add daylight harvesting without running additional wires.
FUNCTIONALRest Room ApplicationUtilize remote mounted control unit and multiple sensors to ensure occupant coverage.
WLP450C
LineVoltage
WLS1278xx
Window
WLP2500W
WLDH
Line Voltage
(2) WLS1278xx
Window Window
WLP2500W
WLC316R
Line Voltage
![Page 4: H-MOSS WL-Series Wireless Controls FAST Private Office Application Replace wall switch with receiver switch and position sensor to "see" occupant's hands. FLEXIBLE](https://reader033.vdocuments.us/reader033/viewer/2022060718/607ec32b9592d02bf2165f82/html5/thumbnails/4.jpg)
H-MOSS® Occupancy Sensors WL-Series Wireless Controls
Wireless Ceiling Mount SensorDescription Coverage Color Catalog Number
Ceiling mount 360° 324-676 ft2 White WLP450C
Wireless Wall Mount SensorDescription Coverage Color Catalog Number
Wall mount 180° 3000 ft2 White WLP3000W
Corner mount 90° 2500 ft2 White WLP2500W
Hallway Up to 150 linear feet
White WLP150H
Compatible Controls: WLS1278xx switch, WLC316R control unit, or any Lutron Clear Connect Enabled Control Device
Wireless Daylight SensorDescription Color Catalog NumberDaylight sensor 0–107,000 Lux (0-10,000 fc)
White WLDH
Compatible Controls: WLS1278xx switch, WLC316R control unit, or any Lutron Clear Connect Enabled Control Device
Wireless Wall SwitchesDescription Color Catalog Number
8A Lighting, 3A Fan (1/10 HP motor, 120V only), Spec Grade Electronic Switch 120–277V, No Neutral Wire Required
IvoryWhite
WLS1278IWLS1278W
Accessory Switch 120V IvoryWhite
WLAS120IWLAS120W
Accessory Switch 277V IvoryWhite
WLAS277IWLAS277W
Compatible Transmitters: WLP series and WLDH sensors or any Lutron Clear Connect Enabled Sensor
Wireless Control UnitDescription Catalog NumberWireless load control unit with isolated relay
WLC316R
Compatible Transmitters: WLP series and WLDH sensors or any Lutron Clear Connect Enabled Sensor
Sensor Coverage Chart (for sensor mounted in center of room)
Ceiling height
Maximum room dimensions for complete floor coverage*
8 ft (2.4 m) 18 ft x 18 ft (5.5 m × 5.5 m) 324 ft2 (30.2 m2)9 ft (2.7 m) 20 ft x 20 ft (6.1 m × 6.1 m) 400 ft2 (37.2 m2)10 ft (3.0 m) 22 ft x 22 ft (6.7 m × 6.7 m) 484 ft2 (44.9 m2)12 ft (3.7 m) 26 ft x 26 ft (7.9 m × 7.9 m 676 ft2 (62.4 m2)
*12 ft (3.7 m) is the recommended maximum mounting height
11'7'
8'
6'12’
WLP450C
Setup Procedure
Coverage Patterns
WLP3000W
WLP150H
10'
150'
7'
150'
0
10'
150'
7'
150'
0
Side View
Top View
60'50'
25'18'
25'18'
0'
0
750'
60'
* Sensor mounting shown at 7 ft (2.1 m). Mounting height should be between 6 and 8 ft (1.6 and 2.4 m).
Side View
Top View
35'
50'
0
735'
50'
* Sensor mounting shown at 7 ft (2.1 m). Mounting height should be between 6 and 8 ft (1.6 and 2.4 m).
Side View
WLP2500W
Top View
2) Press and hold for 6 seconds until lights flash to confirm pairing
1) Press and hold switch for 6 seconds until LED flashes
3) Repeat process for additional sensors
Minor motion
Major motion
Ordering Information
*Clear Connect™ is a registered trademark of Lutron Electronics Co., Inc.
www.hubbell-wiring.com
Hubbell Wiring Systems • Hubbell Incorporated (Delaware) • 40 Waterview Drive • Shelton, CT 06484 • Phone (800) 288-6000 • FAX (800) 255-1031 Printed in U.S.A. Specifications subject to change without notice. ® is a registered trademark of Hubbell Incorporated. WLFHM003 1/13