gujarat state electricity corporation ltd. wanakbori ... · kheda payable at dena bank, wtps 2....

“SAVE ENERGY FOR BENEFIT OF SELF AND NATION”

GUJARAT STATE ELECTRICITY CORPORATION LTD.

WANAKBORI THERMAL POWER STATION Taluka: Thasra Dist : Kheda Pin: 388 239

Telephone No. 02699-235 522 Fax No. 02699-235 607

E-Mail: [email protected] [email protected] Web Site: www.gsecl.in

RFQ-14613E, SUPPLY OF NEOPRENE RUBBER GASKET AND O-RINGS FOR GUN AND

HAG POWER CYLINDER AT WTPS

Signature of the bidder

With company' seal

CHIEF ENGINEER (C&O), GSECL,WANAKBORI THERMAL POWER STATION, INVITES

TENDERS FROM INTERESTED BIDDERS, FOR SUPPLY OF ABOVE MATERIAL. THE DETAILS OF THE SAME ARE GIVEN BELOW.

BIDDERS SHOULD SUBMIT THE DOWNLOADED DOCUMENTS, DULY FILLED,

STAMPED AND SIGNED, AS PER THE INSTRUCTIONS GIVEN HERE UNDER.

1 Estimated Cost 81680

2 Last date of issue of tender NOT APPLICABLE

3 Last date of submission of TECHNICAL BID & PRICE BID (By R.P.A.D. Only)

Up to 3.00 p.m. on OR before DUE DATE

4 Date of opening (if possible) TECHNICAL BID ONLY

3.30 p.m. On DUE DATE

5 Time limit for completion 03 MONTHS

6 Earnest Money Deposit 820

7 Security Deposit 10% OF THE END COST

8 Tender fee by Cash/DD 500

9 Delivery of goods (A) Sample Approval within YES(FOR ITEM NO.4 TO 8)

(A) Bulk Supply (After Approval of sample)

03 MONTHS

10 Validity of rates 120 DAYS

1. Tender Fee (non refundable) will be accepted by Demand Draft only. The DD should be

drawn in favour of Gujarat State Electricity Corporation Limited, TA-Thasra Dist. - Kheda payable at DENA BANK, WTPS

2. Earnest Money Deposit (refundable)will be accepted either by Demand Draft in favour of Gujarat State Electricity Corporation Limited, TA-Thasra Dist. - Kheda payable at DENA BANK, WTPS or by Bank Guarantee of any of the nationalized/Approved Bank of GSECL. GSECL has right to reject any or all tenders without assigning any reason thereof is reserved by competent authority. DD No. and Bank Guarantee No. & date should be mentioned on envelope invariably on Technical Bid Cover as well as main Cover.









With company' seal

3. Please submit Technical Bid (this document) along with Commercial Terms and

conditions and annexures duly filled and signed/stamped in Technical bid cover. Price Bid (Schedule B) & Form A must be kept in separate cover. Both the above covers (i.e. Technical Bid & Price Bid cover) are to be kept in a Big envelope super scribing the tender number, subject & due date of opening.

4. Vendor registration with GSECL is not compulsory required for submitting the Tender. 5. Bidders are advised to visit our above websites regularly up to opening of bid for

corrigendum if any & submit corrected copy of tender (otherwise their offer will not be considered for opening) & extension of due date.

Postal Address: Gujarat State Electricity Corporation Limited Wanakbori Thermal Power Station TA-Thasra Dist. - Kheda 388 239









With company' seal

TECHNICAL BID Sr. No. Description of Material Qty. Reqd Unit

1 NEOPRANE RUBBER INSERTION SHEET 1.5 MM

THICK 12 Kilogram

2 100% SYNTHETIC NEOPRENE RUBBER SHEET SIZE 3

MM 60 Kilogram

3 100% NEOPRENE RUBBER SHEET 1MTRX2MTRX5MM

THICK 20 Kilogram

4 100 % VITON RUBBER " O " - RING FOR GUN POWER

CYLINDER - TYPE - 1 AS PER DRG. NO.- WTPS / ST - II

/ 002 / 858

120 Number

5 100 % VITON RUBBER " O " - RING FOR GUN POWER

CYLINDER - TYPE - 3 AS PER DRG. NO.- WTPS / ST - II

/ 002 / 858

60 Number

6 100 % VITON RUBBER 'O' - RING FOR HOT AIR GATE

POWER CYLINDER - TYPE-II AS PER -DRAWING NO.-

WTPS/ST-II/002/813 R2 FOR STAE-II,UNIT 4,5, & 6.

60 Number

7 100 % VITON RUBBER 'O' -RING FOR HOT AIR GATE

POWER CYLINDER - TYPE I AS PER - DRAWING NO. -

WTPS/ST-II/002/813 R2 FOR STAGE-II, UNIT 4,5, & 6.

140 Number

8 PISTON ROD PACKING DERLHIN NYLON CAGE FOR

HOT AIR GATE 3 - WAY MANUAL OPERATING

VALVE - (MOV ) - ITEM NO. - 9 AS PER DRG. NO. -

WTPS / ST - II / 002 / 901

100 Number

Note:

(1) Please offer for our required specifications only. (2)Please quote your rate, terms & condition in our prescribed forms & shall be duly filled & signed by bidder with company's round seal. (3)Bidder shall have to fill up the attached Annexure-'A' with Duly Signed & same is to be submitted along with Technical Bid. (4)You shall have to furnish the "Integrity Pact" duly sealed and signed and submit along with









With company' seal

technical bid.(Annexture-B). (5)Please clearly mention the make/makes for which rates offered by you. (6)The successful Bidder Shall Have To Submit the Sample Of Ordered item no. 4 to 8 only for our approval before bulk supply. (7) The successful bidder shall have to furnish the test-certificate of ordered items along with supply.

TECHNICAL SPECIFICATIONS:-

FOR ITEM NO 01 TO 03 -Temp. withstand capacity -140 deg. - Elongation percentage: 57 % FOR ITEM NO 04 : 100 % VITON 'O'- RING FOR GUN POWER CYLINDER SPECIFICATIONS :- Material : 100 % Viton Hardness : SHORE- A 75 to 85 Temp. Withstand : 200 Deg. C , Dimensions : Type- I As per Drg No.WTPS/ST-II/002/858 (Attached here with) FOR ITEM NO 05 : 100 % VITON 'O' RING FOR GUN POWER CYLINDER SPECIFICATIONS :- As per above Item SR. No.(1) except , Dimensions : Type- 3 As per Drg No.WTPS/ST-II/002/858(Attached here with) FOR ITEM NO 06 : 100 % VITON 'O' RING FOR HOT AIR GATE POWER CYLINDER SPECIFICATIONS :- As per above Item SR. No.(1) except , Dimensions : Type- II As per Drg No.WTPS/ST-II/002/813 R2(Attached here with) FOR ITEM NO 07 : 100 % VITON 'O' RING FOR HOT AIR GATE POWER CYLINDER SPECIFICATIONS :- As per above Item SR. No.(1) except , Dimensions : Type- I As per Drg No.WTPS/ST-II/002/813 R2(Attached here with)









With company' seal

FOR ITEM NO 08 : SUPPLY OF PISTON ROD PACKING DERLHIN NYLON CAGE FOR HOT AIR GATE MANUAL SOLENOID VALVE. SPECIFICATIONS :- Dimensions : As per Item No.(9) of Drg No.WTPS/ST-II/002/901(Attached here with)

I/C CHIEF ENGR (C&O) GSECL, WTPS

Contractor's Signature With date and seal RFQ No. : 14613









With company' seal

gujarat state electricity corporation ltd. wanakbori ... · kheda payable at dena bank, wtps 2....

Documents