guide to evolution tek screws for heavy · pdf fileevolution supertek screws use as an...
TRANSCRIPT
guide to evolutiontek screws for heavy steel
Cop
yrig
ht ©
201
1 Ev
olut
ion
Fast
ener
s (U
K) L
td. A
ll rig
hts
rese
rved.
Premium quality is something we take very seriously at Evolution and our ISO 9001 certification demonstrates this. We are dedicated to ensuring quality in everything we do, from our products to our Customer Services and Marketing Support.
We are committed to ensuring the quality of our products at every stage in the production process. From initial product design, to prototype testing, through the manufacturing process to final testing and distribution of approved fasteners.
We believe in the quality of our products but don’t just take our word for it! If you would like some samples to try them for yourself: call +44 (0)141 647 7100 or e-mail [email protected]
evolution quality
Evolution Fasteners (UK) Ltd stock a wide range of high performance, self-drilling tek screws specifically designed for a variety of applications in heavy steel i.e. 3.5mm to 22.0mm thick steel.
This guide outlines key application and product information for our: • supertek screws• hex head tek screws• bi-metal hex head tek screws• bi-metal wing-drill tek screws• wing-drill tek screws• low profile tek screws
Also included is further information about the 500/1,000hr EvoshieldTM coating used on our tek screws.
guide to evolution tek screwsfor heavy steel
evolution technical support Product technical and performance information is available in our product datasheets which are downloadable from the Tech Support area of our website www.evolutionfasteners.co.uk
The qualified engineers in our in-house Technical Department are available to:
• provide technical advice and calculations • carry out in-situ testing to support our products• discuss your requirements for individual projects• design and manufacture bespoke fasteners
For further technical information or specific queries about the use of our products, please contact our Technical Department:call +44 (0)141 647 7100 or e-mail [email protected]
evolutionsupertek screws
use as an alternative to ‘shot-fire’ in thicker steels up to 22.0 thick.
use in roofing and cladding applications where thicker steels are used.
fastening brick ties where steel is too hard for ‘normal’ tek screws.
use in super hard problem steels with a high percentage of re-constituted material.
designed for:
range information:
Product Code Size Box Qty Carton Qty Washer Ø Effective Thread length Drilling Capacity
TSHW5.5-50-7 5.5 x 50mm 100 1,400 N/A 25mm 3.5mm - 18.5mm
TSBW5.5-50-7 5.5 x 50mm 100 1,400 16mm 21mm 3.5mm - 18.5mm
TSHW6.3-60-8 6.3 x 60mm 100 1,000 N/A 32mm 4.0mm - 22.0mm
With washer
Without washer
evolution technical support Available with (16mm bonded EPDM washer) or without washer
Unique spiral, supertek drill tip enables stress free drilling in the hardest steels without overheating
Superior, more consistent performance in heavier steels when compared with ‘shot-fire’
Labour saving: will self-drill through standard 12mm structural steel in just 6 seconds
1,000hr silver EvoshieldTM coating for maximum corrosion protection
key product features:
evolution hex head tek screws
key product features:
Available with (16mm bonded EPDM washer) or without washer
Washer acts as isolation between substrate and fixture and as a weatherseal
Super hard, super sharp drill tip
Aggressive thread form design ensures consistent tapping and superb holding power
500hr silver EvoshieldTM coating for superior corrosion protection
Hex Head Tek Screws without Washer Product Code Size Box Qty Carton Qty Effective Thread Length Recommended Drill SpeedTSHW5.5-32-5 5.5 x 32mm 100 2,400 12mm 1,500 - 2,500 RPM
TSHW5.5-38-5 5.5 x 38mm 100 2,400 18mm 1,500 - 2,500 RPM
TSHW5.5-50-5 5.5 x 50mm 100 2,400 30mm 1,500 - 2,500 RPM
TSHW5.5-75-5 5.5 x 75mm 100 1,400 55mm 1,500 - 2,500 RPM
TSHW5.5-100-5 5.5 x 100mm 100 1,400 80mm 1,500 - 2,500 RPM
range information:
Hex Head Tek Screws with WasherProduct Code Size Washer
ØBox Qty Carton Qty Effective Thread Length Recommended Drill Speed
TSBW5.5-38-5 5.5 x 38mm 16mm 100 2,400 15mm 1,500 - 2,500 RPM
TSBW5.5-50-5 5.5 x 50mm 16mm 100 1,400 27mm 1,500 - 2,500 RPM
TSBW5.5-60-5 5.5 x 60mm 16mm 100 1,400 37mm 1,500 - 2,500 RPM
TSBW5.5-70-5 5.5 x 70mm 16mm 100 1,400 47mm 1,500 - 2,500 RPM
TSBW5.5-85-5 5.5 x 85mm 16mm 100 1,400 62mm 1,500 - 2,500 RPM
TSBW5.5-100-5 5.5 x 100mm 16mm 100 1,400 80mm 1,500 - 2,500 RPM
fixing cladding/roofing applications to steel purlins or rails 4.0mm - 12.5mm thick.
designed for:
fixing liner panels and general components to steel 4.0mm - 12.5mm thick.
designed for:
With washer
Without washer
evolution bi-metal hex head tek screws
use with systems containing aluminium sheeting/panelling.
designed for:
Bi-metal Hex Head Tek Screws with WasherProduct Code Size Washer
ØBox Qty Carton Qty Recommended
Drill SpeedEffective Thread
Length
BMBW5.5-38-5 5.5mm x 38mm 16mm 200 2,000 1,500 - 2,500 RPM 12mmBMBW5.5-65-5 5.5mm x 65mm 16mm 100 1,000 1,500 - 2,500 RPM 42mm
BMBW5.5-100-5 5.5mm x 100mm 16mm 100 1,000 1,500 - 2,500 RPM 80mm
range information:
Hex Head Tek Screws without Washer Product Code Size Box Qty Carton Qty Effective Thread Length Recommended Drill SpeedTSHW5.5-32-5 5.5 x 32mm 100 2,400 12mm 1,500 - 2,500 RPM
TSHW5.5-38-5 5.5 x 38mm 100 2,400 18mm 1,500 - 2,500 RPM
TSHW5.5-50-5 5.5 x 50mm 100 2,400 30mm 1,500 - 2,500 RPM
TSHW5.5-75-5 5.5 x 75mm 100 1,400 55mm 1,500 - 2,500 RPM
TSHW5.5-100-5 5.5 x 100mm 100 1,400 80mm 1,500 - 2,500 RPM
range information:
Hex Head Tek Screws with WasherProduct Code Size Washer
ØBox Qty Carton Qty Effective Thread Length Recommended Drill Speed
TSBW5.5-38-5 5.5 x 38mm 16mm 100 2,400 15mm 1,500 - 2,500 RPM
TSBW5.5-50-5 5.5 x 50mm 16mm 100 1,400 27mm 1,500 - 2,500 RPM
TSBW5.5-60-5 5.5 x 60mm 16mm 100 1,400 37mm 1,500 - 2,500 RPM
TSBW5.5-70-5 5.5 x 70mm 16mm 100 1,400 47mm 1,500 - 2,500 RPM
TSBW5.5-85-5 5.5 x 85mm 16mm 100 1,400 62mm 1,500 - 2,500 RPM
TSBW5.5-100-5 5.5 x 100mm 16mm 100 1,400 80mm 1,500 - 2,500 RPM
key product features:
Available with (16mm bonded EPDM washer) or without washer
Washer acts as isolation between substrate and fixture and as a weatherseal Super hard, super sharp drill tip will self-drill through 4.0mm - 12.5mm thick steel Aggressive thread form design ensures consistent tapping and superb holding power
Stainless steel shank married to carbon steel drill point then bright zinc plated
The best of both worlds: superior drilling performance without sacrificing corrosion protection
With washer
Without washer
Bi-metal Hex Head Tek Screws without WasherProduct Code Size Box Qty Carton Qty Recommended Drill Speed Effective Thread LengthBMHH5.5-38-5 5.5mm x 38mm 200 2,000 1,500 - 2,500 RPM 15mmBMHH5.5-50-5 5.5mm x 50mm 100 1,000 1,500 - 2,500 RPM 30mm
fixing timber or composites to 4.0mm - 12.5mm thick steel.
designed for:
evolutionwing-drill tek screws
key product features:
range information:
Precision formed reamer wings prevent timber jacking during use Super hard, super sharp drill tip will self-drill through up to 100.0mm timber into 4.0mm - 12.5mm steel
Stick fit recess ensures stable driving characteristics
500hr silver EvoshieldTM coating for superior corrosion protection
Product Code Size Box Qty Carton Qty Effective Thread Length Recommended Drill Speed Timber Thickness
TSTF5.5-42-5 5.5 x 42mm 100 2,400 13mm 1,500 - 2,500 RPM 10.0 - 13.0mm
TSTF5.5-65-5 5.5 x 65mm 200 2,800 28mm 1,500 - 2,500 RPM 10.0 - 28.0mm
TSTF5.5-85-5 5.5 x 85mm 100 1,400 50mm 1,500 - 2,500 RPM 30.0 - 50.0mm
TSTF5.5-100-5 5.5 x 100mm 100 1,400 65mm 1,500 - 2,500 RPM 45.0 - 65.0mm
TSTF5.5-135-5 5.5 x 135mm 100 1,200 100mm 1,500 - 2,500 RPM 45.0 - 100.0mm
evolution bi-metal wing-drill tek screws
use in aggressive timber treatments e.g. ACQ or salt based. Also suitable for use in hardwoods with high tannin content.
designed for:
range information: Product Code Size Box Qty Carton Qty Effective Thread
LengthRecommended
Drill SpeedTimber Thickness
BMWD5.5-65-5 5.5mm x 65mm 100 1,000 28mm 1,500 - 2,500 RPM 10.0 - 28.0mm
BMWD5.5-85-5 5.5mm x 85mm 100 1,000 50mm 1,500 - 2,500 RPM 30.0 - 50.0mm
BMWD5.5-135-5 5.5mm x 135mm 100 1,000 100mm 1,500 - 2,500 RPM 45.0 - 100.0mm
key product features:
Precision formed reamer wings prevent timber jacking during use
Super hard, super sharp drill tip will self-drill through up to 100.0mm timber into 4.0mm - 12.5mm steel
Stick fit recess ensures stable driving characteristics
Stainless steel shank married to carbon steel drill point then bright zinc plated
The best of both worlds: superior drilling performance without sacrificing corrosion protection
What is EvoshieldTM
EvoshieldTM is our trade marked fastener coating. EvoshieldTM is a non-organic, tri-layered ceramic surface coating developed to attain optimum performance in the various pollutive and atmospheric conditions that cause corrosion. Layer 1: metallic zinc Layer 2: high-grade anti-corrosion chemical conversion film Layer 3: baked ceramic top coating
The distinguishing feature of EvoshieldTM is the tight joining of the baked ceramic top coating and the chemical conversion film thanks to the cross-linking effect. These layers are bonded together with the metallic zinc layer through chemical reactions, and this unique method of combining layers results in a rigid and dense combination of the coating films. EvoshieldTM treatment does not attribute its anti-corrosion properties to merely a single material, but the synergy of these three layers, which combined have superb rustproof qualities. Compatible with metal coated and painted surfaces, fasteners coated with EvoshieldTM are resistant to acid and alkaline attack, galvanic corrosion and hydrogen embrittlement. These fasteners conform to corrosive gas test standard (Kesternich) DIN50018 and give a salt spray fog test to exceed (JISZ2731) 1,000 hours (ASTM B117).
range information:
evolution low profile tek screws
fixing steel to 4.0mm - 12.5mm thick steel e.g. standing seam and clip fix systems.
designed for:
Product Code Size Box Qty Carton Qty Head Style Effective Thread Length Recommended Drill SpeedTSLP5.5-38-5 5.5 x 38mm 200 4,800 Low Profile Wafer 30mm 1,500 - 2,500 RPM
range information:
key product features:
Low profile head suitable for use where minimum head height is required
Stick-fit recess ensures stable driving characteristics
Super hard, super sharp drill tip 500hr silver EvoshieldTM coating for superior corrosion protection
range information:
E-mail: [email protected] Tel: +44 (0)141 647 7100 Fax: +44 (0)141 647 5100