Summary of INTECSEA Global Technology WorkshopPHILIP COOPER, GLOBAL TECHNOLOGY DIRECTOR | 13:30-14:00

Phil will provide a brief overview of each topic presented during the week by our experts at the internal workshop. All topics that Phil highlights will be represented

by an expert in the room, who will be available to discuss their presentation with you, on a one-on-one basis.

Topics include:• Lifecycle Data Management• Alternative Jumper Design - Eliminating Metrology• The State-of-the-Art Damped Motion FPSO (DM-FPSO)

• Gas Processing including CNG, GTL, LNG• Mooring System Reliablility• Response Based Analysis of Floating Systems• Field Observations of As-Laid Pipeline Embedment• Numerical Analysis of Anchor Dragging• Pipeline Dynamic On-Bottom Stability Assessment• Fiber Optic Cable Leak Detection Systems• Acoustic-Induced-Vibration Fatigue Life Assessment• HISC Performance Validation of DSS Girth Welds • Subsea Processing Techno-economics • Probability Bounds Analysis for Quantitative Risk Analysis• JIP Update

Reliability-Based Qualification of New Subsea HardwareSARIA MOHAMMED, HOUSTON | 14:00-14:30

Reliability data is typically generated from field performance over an extended period of time. New unproven technologies are subjected to qualification tests to demonstrate

functional operation and adherence to specification. For new technologies there understandably exists a limited number of recognized standard tests to verify and qualify a design. Qualification testing is limited by both time and cost, and has

historically focused on verifying product functional performance rather than reliability. There is a clear need for a statistical-based method to quantify a minimum sample size and test duration from which to derive meaningful reliability data.

This presentation describes a methodology for assessing new technologies and identifying relevant tests that assist in determining a substantiated reliability value which can then be used when considering unproven technologies.

GLOBAL TECHNOLOGY OPEN HOUSEThursday 5th March, 2015 12:30 - 17:00Kuala Lumpur Convention Centre (KLCC) Room 406 & 407 Followed by refreshments at Skybar at 17:30

Welcome and IntroductionSTEVE LEE, SENIOR VICE PRESIDENT ASIA & MIDDLE EAST 12:30 - 13:30 LUNCH WILL BE SERVED IN KLCC CORE AREA

Steve has over 24 years’ experience in the oil and gas industry, covering engineering, construction and project

management of subsea pipelines, marginal fields and deepwater developments. He joined INTECSEA in 1996,

and over the years has held various positions in Houston and Malaysia. Steve served as Location Manager for

WorleyParsons Kuala Lumpur before stepping into the Senior Vice President role.

14:30 - 15:00 NETWORKING BREAK

State-of-the-art ECA for CRA PipelinesJOE TRAN , PERTH | 15:00-15:30

CRA clad or lined pipelines are increasingly required to handle corrosive fluids from HTHP fields. Available welding consumables for CRA girth welds do not ensure strength

overmatch with the steel backing pipe. This makes it more difficult to demonstrate girth weld integrity, especially when

strain levels exceed yield in installation or operation. Joe will explain how INTECSEA has developed efficient but rigorous methods to perform ECA using full 3D FEA methods, which have been applied to multiple projects in Australia and beyond. This has helped operators and contractors to select the best welding consumable and establish workable weld defect size limits, so that lay rates – and hence costs – are contained.

Probabilistic Pipeline Life PredictionPREMKUMAR THODI, ST JOHN’S | 15:30 - 16:00

Many offshore pipelines are approaching or beyond their intended design life. Other pipelines are required to operate at increased temperatures after many years in service. As these assets

age or their operating conditions become more severe, the risk of leak or rupture must be understood and managed in order to avoid environmental and safety hazards. Inspection

methods exist that can identify and quantify corrosion, cracking or other deterioration. This paper presents a methodology for assessing the condition of ageing pipelines and determining the remaining life that supports extended operation without compromising safety and reliability. Applying this methodology would facilitate a well-informed decision which enables stakeholders to determine the best strategy for maintaining the integrity of ageing pipelines.

Advances in Subsea Power DistributionMATAI WILSON, HOUSTON | 16:00-16:30

Deepwater offshore real estate is in short supply and not all deepwater developments will sustain a host facility. Therefore, deepwater tiebacks must be considered. In particular,

deepwater challenges drive production complexities such as artificial lift requirements to offset tight formations with low productivity indices. Subsea power distribution offers a way to minimize a tieback’s impact to an existing or future host, and may prove to be a key factor in enabling challenging deepwaer tiebacks with extremely limited infrastructure options.Subsea power distribution involves the marinization

of bulky topside energy conversion equipment for placement subsea and locally to driven artificial lift equipment, such as downhole ESPs and mudline pumps. Subsea power distribution also streamlines umbilical requirements by supplying bulk power via a single power umbilical that is distributed to subsea energy conversion components (variable speed drives) via subsea switchgear (circuit breakers). The topside savings on space and deck load can be significant, not to mention the CAPEX and Installation savings with a reduced power umbilical compliment. Subsea power distribution may offer the much needed life support for numerous marginal deepwater developments that might otherwise remain stranded.

GLOBAL TECHNOLOGY OPEN HOUSE

www.intecsea.com/technology

technology@intecsea.com

16:30 - 17:00 PANEL DISCUSSION