gts cst simulationsgts 300 kv p-gun cst microwave studio simulations gabriel palacios...
TRANSCRIPT
![Page 2: GTS CST simulationsGTS 300 kV p-gun CST microwave studio simulations Gabriel Palacios gpala001@odu.edu 06/16/18](https://reader036.vdocuments.us/reader036/viewer/2022062519/61288940cd019b1eac189923/html5/thumbnails/2.jpg)
Summary
• Solidworks• Geometry modifications
• CST• Details of simulation
• Electric field and potential plots
• Additional slides
![Page 3: GTS CST simulationsGTS 300 kV p-gun CST microwave studio simulations Gabriel Palacios gpala001@odu.edu 06/16/18](https://reader036.vdocuments.us/reader036/viewer/2022062519/61288940cd019b1eac189923/html5/thumbnails/3.jpg)
Solidworks geometry modifications:
![Page 4: GTS CST simulationsGTS 300 kV p-gun CST microwave studio simulations Gabriel Palacios gpala001@odu.edu 06/16/18](https://reader036.vdocuments.us/reader036/viewer/2022062519/61288940cd019b1eac189923/html5/thumbnails/4.jpg)
Solidworks geometry modifications:As Fay suggested, it was better to separate the model into pieces. Specially the small parts near the Kovar ring, the cathode triple-point junction and added a cylinder for the field maps at the cathode-anode gap.
![Page 5: GTS CST simulationsGTS 300 kV p-gun CST microwave studio simulations Gabriel Palacios gpala001@odu.edu 06/16/18](https://reader036.vdocuments.us/reader036/viewer/2022062519/61288940cd019b1eac189923/html5/thumbnails/5.jpg)
Solidworks geometry modifications:…and added a cylinder for very fine meshing to obtain very fine field maps at the cathode-anode gap.
![Page 6: GTS CST simulationsGTS 300 kV p-gun CST microwave studio simulations Gabriel Palacios gpala001@odu.edu 06/16/18](https://reader036.vdocuments.us/reader036/viewer/2022062519/61288940cd019b1eac189923/html5/thumbnails/6.jpg)
CST materials: PEC• Steel for all metal components with
Perfect electric conductor (PEC). Since this is a preset we don’t need to define anything. Also, Thermal, Mechanical and Density properties are not included in the calculation.
![Page 7: GTS CST simulationsGTS 300 kV p-gun CST microwave studio simulations Gabriel Palacios gpala001@odu.edu 06/16/18](https://reader036.vdocuments.us/reader036/viewer/2022062519/61288940cd019b1eac189923/html5/thumbnails/7.jpg)
• For black alumina I used the same parameters as in COMSOL.
• ε=8.4
• σ=2E-12 [S/m]
CST materials: Insulator
![Page 8: GTS CST simulationsGTS 300 kV p-gun CST microwave studio simulations Gabriel Palacios gpala001@odu.edu 06/16/18](https://reader036.vdocuments.us/reader036/viewer/2022062519/61288940cd019b1eac189923/html5/thumbnails/8.jpg)
• For rubber I used the same parameters as in COMSOL.
• ε=2.37
• σ=1E-14 [S/m]
CST materials: Insulator
![Page 9: GTS CST simulationsGTS 300 kV p-gun CST microwave studio simulations Gabriel Palacios gpala001@odu.edu 06/16/18](https://reader036.vdocuments.us/reader036/viewer/2022062519/61288940cd019b1eac189923/html5/thumbnails/9.jpg)
• For vacuum cylinder and soroundings.
• ε=1.0
• σ=0 [S/m]
CST materials: Insulator
![Page 10: GTS CST simulationsGTS 300 kV p-gun CST microwave studio simulations Gabriel Palacios gpala001@odu.edu 06/16/18](https://reader036.vdocuments.us/reader036/viewer/2022062519/61288940cd019b1eac189923/html5/thumbnails/10.jpg)
CST mesh:
• The mesh was separated into (maybe too many) pieces. :P
• The important part is, I only set some individual parts that require fine detail and left the rest to be auto-meshed.
![Page 11: GTS CST simulationsGTS 300 kV p-gun CST microwave studio simulations Gabriel Palacios gpala001@odu.edu 06/16/18](https://reader036.vdocuments.us/reader036/viewer/2022062519/61288940cd019b1eac189923/html5/thumbnails/11.jpg)
CST mesh: Pierce geometry
• The front Pierce geometry has a maximum step width of 0.01m.
![Page 12: GTS CST simulationsGTS 300 kV p-gun CST microwave studio simulations Gabriel Palacios gpala001@odu.edu 06/16/18](https://reader036.vdocuments.us/reader036/viewer/2022062519/61288940cd019b1eac189923/html5/thumbnails/12.jpg)
CST mesh: Cathode triple-point
• The cathode triple-point has a maximum step width of 0.001 [m].
![Page 13: GTS CST simulationsGTS 300 kV p-gun CST microwave studio simulations Gabriel Palacios gpala001@odu.edu 06/16/18](https://reader036.vdocuments.us/reader036/viewer/2022062519/61288940cd019b1eac189923/html5/thumbnails/13.jpg)
CST mesh: Cylinder for field maps
• The cylinder for field maps has a maximum step width of 0.0002 [m].
![Page 14: GTS CST simulationsGTS 300 kV p-gun CST microwave studio simulations Gabriel Palacios gpala001@odu.edu 06/16/18](https://reader036.vdocuments.us/reader036/viewer/2022062519/61288940cd019b1eac189923/html5/thumbnails/14.jpg)
CST mesh: Upper Kovar ring
• The Kovar ring that holds the insulator to the upper flange has a maximum step width of 0.001 [m].
![Page 15: GTS CST simulationsGTS 300 kV p-gun CST microwave studio simulations Gabriel Palacios gpala001@odu.edu 06/16/18](https://reader036.vdocuments.us/reader036/viewer/2022062519/61288940cd019b1eac189923/html5/thumbnails/15.jpg)
CST mesh: Anode and beam-line
• The anode and beam line have a maximum step width of 0.001 [m].
![Page 16: GTS CST simulationsGTS 300 kV p-gun CST microwave studio simulations Gabriel Palacios gpala001@odu.edu 06/16/18](https://reader036.vdocuments.us/reader036/viewer/2022062519/61288940cd019b1eac189923/html5/thumbnails/16.jpg)
CST mesh: Insulator
• The insulator has a maximum step width of 0.001 [m].
![Page 17: GTS CST simulationsGTS 300 kV p-gun CST microwave studio simulations Gabriel Palacios gpala001@odu.edu 06/16/18](https://reader036.vdocuments.us/reader036/viewer/2022062519/61288940cd019b1eac189923/html5/thumbnails/17.jpg)
CST mesh: Rubber plug
• The rubber plug has a maximum step width of 0.01 [m].
![Page 18: GTS CST simulationsGTS 300 kV p-gun CST microwave studio simulations Gabriel Palacios gpala001@odu.edu 06/16/18](https://reader036.vdocuments.us/reader036/viewer/2022062519/61288940cd019b1eac189923/html5/thumbnails/18.jpg)
CST simulation: Background
• The background is defined as vacuum.
![Page 19: GTS CST simulationsGTS 300 kV p-gun CST microwave studio simulations Gabriel Palacios gpala001@odu.edu 06/16/18](https://reader036.vdocuments.us/reader036/viewer/2022062519/61288940cd019b1eac189923/html5/thumbnails/19.jpg)
CST simulation: Boundaries
• The boundaries are set to ground except the top and the back of the beam line
![Page 20: GTS CST simulationsGTS 300 kV p-gun CST microwave studio simulations Gabriel Palacios gpala001@odu.edu 06/16/18](https://reader036.vdocuments.us/reader036/viewer/2022062519/61288940cd019b1eac189923/html5/thumbnails/20.jpg)
CST simulation: Potential
• I defined the potential in three parts:• Chamber, upper flange, Kovar
ring, anode and beam-pipe at 0 [V]
![Page 21: GTS CST simulationsGTS 300 kV p-gun CST microwave studio simulations Gabriel Palacios gpala001@odu.edu 06/16/18](https://reader036.vdocuments.us/reader036/viewer/2022062519/61288940cd019b1eac189923/html5/thumbnails/21.jpg)
CST simulation: Potential
• I defined the potential in three parts:• Also the NEG’s at 0 [V]
![Page 22: GTS CST simulationsGTS 300 kV p-gun CST microwave studio simulations Gabriel Palacios gpala001@odu.edu 06/16/18](https://reader036.vdocuments.us/reader036/viewer/2022062519/61288940cd019b1eac189923/html5/thumbnails/22.jpg)
CST simulation: Potential
• I defined the potential in three parts:• Cathode electrode (including
Pierce geometry), shield and high voltage cable at -300 [kV]
![Page 23: GTS CST simulationsGTS 300 kV p-gun CST microwave studio simulations Gabriel Palacios gpala001@odu.edu 06/16/18](https://reader036.vdocuments.us/reader036/viewer/2022062519/61288940cd019b1eac189923/html5/thumbnails/23.jpg)
CST simulation: Solver
• Used the Low frequency as suggested by Fay.
• Did not use the adaptative mesh refinement this time.
![Page 24: GTS CST simulationsGTS 300 kV p-gun CST microwave studio simulations Gabriel Palacios gpala001@odu.edu 06/16/18](https://reader036.vdocuments.us/reader036/viewer/2022062519/61288940cd019b1eac189923/html5/thumbnails/24.jpg)
CST results: Potential
![Page 25: GTS CST simulationsGTS 300 kV p-gun CST microwave studio simulations Gabriel Palacios gpala001@odu.edu 06/16/18](https://reader036.vdocuments.us/reader036/viewer/2022062519/61288940cd019b1eac189923/html5/thumbnails/25.jpg)
CST results: Electric field norm
![Page 26: GTS CST simulationsGTS 300 kV p-gun CST microwave studio simulations Gabriel Palacios gpala001@odu.edu 06/16/18](https://reader036.vdocuments.us/reader036/viewer/2022062519/61288940cd019b1eac189923/html5/thumbnails/26.jpg)
CST results: Electric field norm
Cathode- anode gap close up.
![Page 27: GTS CST simulationsGTS 300 kV p-gun CST microwave studio simulations Gabriel Palacios gpala001@odu.edu 06/16/18](https://reader036.vdocuments.us/reader036/viewer/2022062519/61288940cd019b1eac189923/html5/thumbnails/27.jpg)
CST results:• The results for electric field
magnitude and potential plotted as false color. Also produced 2D and 3D field maps for the cathode-anode gap.
![Page 28: GTS CST simulationsGTS 300 kV p-gun CST microwave studio simulations Gabriel Palacios gpala001@odu.edu 06/16/18](https://reader036.vdocuments.us/reader036/viewer/2022062519/61288940cd019b1eac189923/html5/thumbnails/28.jpg)
Photocathode-anode line:The data for the following plots was taken along a horizontal line from the center of the photocathode to the back of the chamber passing through the anode center as shown in the red line
![Page 29: GTS CST simulationsGTS 300 kV p-gun CST microwave studio simulations Gabriel Palacios gpala001@odu.edu 06/16/18](https://reader036.vdocuments.us/reader036/viewer/2022062519/61288940cd019b1eac189923/html5/thumbnails/29.jpg)
Photocathode-anode line :• This image shows the electric field Ey component in MV/m as a function of position on the z axis.
-1.5
-1
-0.5
0
0.5
1
1.5
0.06 0.08 0.1 0.12 0.14 0.16 0.18 0.2
z[m]
Ey [MV/m]
![Page 30: GTS CST simulationsGTS 300 kV p-gun CST microwave studio simulations Gabriel Palacios gpala001@odu.edu 06/16/18](https://reader036.vdocuments.us/reader036/viewer/2022062519/61288940cd019b1eac189923/html5/thumbnails/30.jpg)
Photocathode-anode line :• This image shows the electric field Ez component in MV/m as a function of position on the z axis.
-7
-6
-5
-4
-3
-2
-1
0
0.06 0.08 0.1 0.12 0.14 0.16 0.18 0.2
z[m]
Ez [MV/m]
![Page 31: GTS CST simulationsGTS 300 kV p-gun CST microwave studio simulations Gabriel Palacios gpala001@odu.edu 06/16/18](https://reader036.vdocuments.us/reader036/viewer/2022062519/61288940cd019b1eac189923/html5/thumbnails/31.jpg)
Future steps
• Recalculate for the white insulator case and obtain field maps.
• Use to investigate the upper flange triple-point.
• Get fields on the insulator surface for insulator studies.
![Page 32: GTS CST simulationsGTS 300 kV p-gun CST microwave studio simulations Gabriel Palacios gpala001@odu.edu 06/16/18](https://reader036.vdocuments.us/reader036/viewer/2022062519/61288940cd019b1eac189923/html5/thumbnails/32.jpg)
Fin.
![Page 33: GTS CST simulationsGTS 300 kV p-gun CST microwave studio simulations Gabriel Palacios gpala001@odu.edu 06/16/18](https://reader036.vdocuments.us/reader036/viewer/2022062519/61288940cd019b1eac189923/html5/thumbnails/33.jpg)
CST frame of reference:
y
z
x
X goes into the page.