gs products catalog 2013
TRANSCRIPT
-
8/11/2019 GS Products Catalog 2013
1/40
-
8/11/2019 GS Products Catalog 2013
2/40
GS PINSETTER PARTS
GS FEATURED PRODUCTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
ELEVATOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
TRANSPORT BAND ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
SETTING TABLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
BALL CUSHION & PIT CURTAIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
SWEEP WAGON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
DRIVE FRAME ASSEMBLY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
DISTRIBUTOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
BALL ACCELERATOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
ELECTRICAL BOX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26TOOLS & MAINTENANCE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
INDEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
SAFETY PROCEDURES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
BRUNSWICK ELECTRONIC REPAIR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
T A B L E O F C O N T E N T S
-
8/11/2019 GS Products Catalog 2013
3/40
www.brunswickbowling.com | 1
N O B O D Y K N O W S P I N S E T T E R S L I K E
B R U N S W I C K K N O W S P I N S E T T E R S
Brunswick introduced its first automatic pinsetter in 1956and has been on the leading
edge of pinsetter innovation ever since. Nobody knows pinsetters like Brunswick knows
pinsetters. So when it comes to OEM parts to support the maintenance and repair of
your pinsetters, Genuine Brunswick Parts are the obvious choice.
Brunswick engineers and mechanics work with suppliers to ensure the parts to support
both the A2and GSseries of pinsetters are exactly what is required in form, fit and
function. Brunswick designed the pinsetters, so who better to provide the parts needed
to ensure the pinsetters meet your expectations.
For some of the most critical parts necessary to achieve great pinsetter performance,
Brunswick has stepped it up a notch with Advanced Performance Genuine Brunswick
parts. Advanced Performance Genuine Brunswick parts are the cream of the crop and
are all backed by at least a 1-year warranty. Like all Genuine Brunswick parts, they are
the originals precision engineered for your equipment, refined with knowledge that can
only be drawn from over 50years of experience in the parts business.
To further enhance our knowledge of pinsetter operations we make a point of listening to
and working with the mechanics who spend their working days with the machines. Over
the years they have taught us a lot about the practical aspects of pinsetter operations.
And in many instances mechanics have given Brunswick ideas for new or improved
products that we have adopted. As you look through this catalog you will see many parts
that were the brainchild of mechanics.
Buy Genuine Brunswick Parts and rest assured you are getting the highest-quality parts,
designed to keep your center running smoothly.
-
8/11/2019 GS Products Catalog 2013
4/40
2 | www.brunswickbowling.com
SETTING TABLE CABLE ASSEMBLY (NEX GEN)
See page 8for additional information.
47245420004
G S > F E A T U R E D P R O D U C T S
PIN FEED EXTENDER KIT
See page 4for additional information.
47862507000
ADVANCED PERFORMANCE STATUS LIGHT BULBS
See page 4for additional information.
47861047000
24volt LED bulbs only (2pack)
GUTTER ADAPTER
See page 14for additional information.
47041721002
ADVANCED PERFORMANCE CHAIN GEAR
See page 16for additional information.
47075474009
GSX SWITCH FINGER
See page 10for additional information.
47054982002
-
8/11/2019 GS Products Catalog 2013
5/40
www.brunswickbowling.com | 3
ADVANCED PERFORMANCE
NEX GEN REAR DISPLAY PACKAGE
See pages 4 & 26for additional information.
47861048401
NEX GEN FIRMWARE (4.95.26)
See pages 4 & 26for additional information.
47862877402
ADVANCED PERFORMANCE
OEM TRANSPORT BAND
See page 6for additional information.
11635201000 Short Pit
11053581000 Long Pit
ADVANCED PERFORMANCE
IMPACT STRIP (PAIR)
See page 12for additional information.
47026102009
UNIVERSAL PIN STATION
See page 18for additional information.
47094792009 2, 3, 4, 8, 9pin location (shown large)
47094793009 1, 5, 6pin location (not shown)
47094794009 7, 10 pin location (not shown)
GSX PIN CLEANER KIT MOP COVERS
See page 22for additional information.
47860012000 Pkg of 2
-
8/11/2019 GS Products Catalog 2013
6/40
4 | www.brunswickbowling.com
ELEVATOR CHAIN REPAIR KIT
Repairs stretched chains which cause elevatorjams. Kit contains tool and master link with pin.
47013871004Master link with pin only
47013872004Elevator chain break tool only
47013873004
G S > E L E V AT O R
NO STEP STICKER
No Step label for Pin DeectorSupport Bracket.
11682569000
PIN FEED EXTENDER KIT
Improves elevator pin loading eciencywhich decreases pin distributor timeouts by up to 90%.
Kits are packaged for lane pairs
Comes with instructions
Requires purchase of one drill xtureper center (47862508000). Soldseparately and includes instructions
47862507000
ADVANCED PERFORMANCE
NEX GEN REAR DISPLAY PACKAGE
Reduce down time and improve safetywith GS Rear Displays.
View errors or error codes from theback of the machine
Nex Gen package includes updatedrmware
47861048401Nex Gen
47861046000 Consolidated(See page 28for additional information)
NEX GEN FIRMWARE UPGRADE (4.95.26)
Easy to replace rmware provides newfeatures and options:
Fine tune table position aer a non-strikerst ball to improve pin collection and
loading eciency, while noticeably reducingpinseer noise in the center
Choose to drop the rake when the lane isturned o, reducing ball jams and protectingsta working in the pit area
The ball accelerator can immediately shutdown upon detection of an associated error,providing additional protection for motorsand equipment
A new timing option will return a ball evenaer the lane has been turned o
47862877402
STATUS LIGHT BULBS
Extend the life of a trouble light - up to50,000hours (24volt assemblies only).
4701564600424volt assembly series 466and above
4701381700412volt assembly series 42 and below
4701468700412volt assembly series 43465
47223170000
12volt LED bulb only (2pack) 47861047000
ADVANCED PERFORMANCE24volt LED bulb only (2pack)
-
8/11/2019 GS Products Catalog 2013
7/40
www.brunswickbowling.com | 5
FOUL
LINE
FOUL
LINE
GSX ELEVATORFull schematics are available
at www.brunswickbowling.com
NEW
NEW
NEW
NEW
1 47015646004 24Volt Trouble LightAssembly Nex Gen
1 47014687004 12Volt Trouble LightAssembly Consolidated
1 47-861047-000 AP - 24Volt LED Bulb (Pkg of 2)1 47223170000 12Volt Bulb2 47014017003 Shovel Guide3 47013951003 Wedge Guide4 47014008003 5/8" Chain w/ Shovel Pins5 47014060003 Ejector
6 47014917009 Pin Count Switch GS96and prior6 47014918003 GS98/GSX7 47014761003 Centering Guides8 47013532009 Pin Shovel Assembly8 47011049001 Pin Shovel Only9 47013992001 LH Front Pin Deflector10 47013991001 RH Front Pin Deflector11 47862507000 Pin Feed Extender Kit11 47862508000 Drill Fixture, Pin Feed Extender12 47024036002 Pin Deflector Support Bracket
13 47023986001 RH Pin Deflector13 47023987001 LH Pin Deflector14 47014009004 Spacer15 47023660004 Cushion Cap16 47861048401 AP - Nex Gen Rear Display17 47861046000 AP - Consolidated Rear Displ18 47013990002 Elevator Guard19 47011053004 Deflection Chain Gear20 47011130004 Bearing Bolt21 47014921000 Rplcmnt Arm-Pin Counter S
PART INDEX
-
8/11/2019 GS Products Catalog 2013
8/40
6 | www.brunswickbowling.com
G S > T R A N S P O R T B A N D A S S E M B LY
VBELT PULLEY
OEM V belt pulley, for transportband drive.
47024004003
THREADED ROD
OEM threaded rod for transportband bearing housing.
47024093004
SIDE FRAME REPAIR KIT
This kit repairs stripped or missinginsert nuts on the transport bandside frames.
Nut plate has peel and stick tapefor easy installation
Kit comes with one plate and oneM10x 60mm socket at head screw
47276153009
CERTIFIED TRANSPORT BAND
Utilize this lower cost belt that stillmaintains the performance of GSpinseers.
Double-nger splice construction withwider joint provides more surfacecontact, relieving impact stress moreeectively
Thicker material gives the belt higherultimate tensile strength and higherbearing load
Use with Pin Feed Extender Kit (pg. 4)to minimize time outs
11635201100 Short Pit (1440 mm x 2020mm)
ADVANCED PERFORMANCE
OEM TRANSPORT BAND
Brunswicks best transport band!Improve performance with thistop of the line transport band.Made to stringent specications toassure it will run straight and willnot stretch, assuring long life.
Use with Pin Feed Extender Kit (pg. 4)to minimize time outs
11635201000 Short Pit (1440 mm x 2020mm)
11053581000 Long Pit (1440 mm x 2450mm)
-
8/11/2019 GS Products Catalog 2013
9/40
www.brunswickbowling.com | 7
GSX TRANSPORT BAND ASSEMBLYFull schematics are available
at www.brunswickbowling.com
1 47025175003 LH Rear Board Assy, odd lane1 47025176003 RH Rear Board Assy, even lane2 11052401001 Sltd. Pan Hd. Screw
8mm x50mm (GS-92)2 11052929000 Sltd. Pan Hd. Screw
10mm x 50mm (GS-96& above)3 11052150001 Finishing Washer 8mm (GS-92)3 47024740004 Finishing Washer
5.3mm x28mm x10.2mm(GS-96& above)
4 47023663004 Rubber Washer (GS-92)4 47024739004 Rubber Washer (GS-96& above)5 11052019001 Flat Washer (GS-92)5 47024741004 Flat Washer (GS-96& above)6 47024744009 Board Screw Kit 10mm7 47023959003 Front Board Assembly8 47023915004 Rubber Spacer9 11135400000 Rubber Well Nut, Series 4376
9 47276153009 Side Frame Repair Kit10 11635201000 AP - OEM Transport Band Belt10 11635201100 Certified Transport Band Belt11 47025051001 LH Short Roller Assy (Rear)11 47024905001 RH Short Roller Assy (Rear)12 47024736009 LH Transport Band Side Frame13 11051858001 Retaining Ring 15mm14 47020942003 Roller15 47020943004 Roller Bushing16 47861011001 Flat Washer 17mm (Pkg of 10)17 47023981002 Roller Assy, 3-stud (Front)18 47023933004 Shaft - Front19 47025178003 Bearing (3-Stud)20 47020908003 End Cap w/Bearing (2-Stud)21 47023982004 Spacer Bushing - 13mm22 47024735009 RH Transport Band Side Frame23 47024094003 Housing23 11430055000 Deep Groove Ball Bearing
23 11051902001 Retaining Ring 52mm24 47024330004 V-Belt Pulley 100mm25 11053909000 V-Belt (use 100mm Pulle25 11053910000 V-Belt (use 125mm Pulle25 47025049004 V-Belt Pulley 125mm26 47024309004 Spring27 11052050001 Flat Washer 10.5mm28 47024093004 Threaded Rod 10mm x 129 11051703001 Hex Nut10mm30 47274332002 Bearing Block Repair Kit31 47861018001 Sltd. Pan Hd. Screw
8mm x60mm (GS-92)31 11052930000 Hx Hd. Cap Screw
10mm x60mm (GS-96&32 47025157004 Spacer Bushing -21mm33 47860013000 ORing4/pkg)
PART INDEX
-STUDOLD
-STUD
NEW
-
8/11/2019 GS Products Catalog 2013
10/40
8 | www.brunswickbowling.com
G S > S E T T I N G T A B L E
SETTING TABLE REPAIR KIT
GS SERIES 13 THROUGH 574
Used to prevent the back portion ofthe GS-Series pinseers seing tablefrom bending upward due to pin impact.If excessive, this bending can obstructmovement and improper operation ofthe spoing tong.
Uses 7existing holes and 2new holesdrilled through the table frame. Therepair plate aaches to the boom ofthe seing table across the entire widthof the frame (from 7pin to 10pin) using9 - hex socket, athead screws
47275850009
SETTING TABLE REPAIR KIT
GSX/CPO SERIES 424 AND ABOVE
Used between the rear swing shamounting support brackets for extrasupport.
Bent or broken supports will not allowthe swing shas of the table to operatecorrectly during pinseer operation,leading to wobbling pins when a newrack is set
Hardware included
47275620009
LINK ASSEMBLY
Keep one of these links in your GSXspare parts inventory at all times.
Allows for stable connection from oneswing sha to the other
Provides adjustment to pin spoingfrom front to back on the pin deck whennew pins are spoed on the pin deck
47055002002
SETTING TABLE CABLE ASSEMBLY (NEX GEN)
Based on eld feedback, this assembly hasbeen improved to provide added exibilityand protection. Additionally, to reducemovement and wear, the cable aachmenthas been modied for an optimized t.
Standard on productionpinseers series 686and above
47245420004
TABLE LATCH
Does your table try and set pins on therst ball cycle? if so your table latch maybe broken. From mechanics requests wehave increased the radius on this partto make it stronger and less prone tobreakage.
47051674004
SETTING TABLE LEVER
Improved design with extra materialand radius to the tab area of this part.
Secures pin holders in the horizontalposition during pinseer operation
Tab connects to the seing table latchassembly
47054989001
ADVANCED PERFORMANCE
GS OVERSIZE SPOTTING TONG DAMPER
Extends life and eliminates pinseerdowntime with these oversize tongs.
Used on all series GS machines,including GSX
Ships in packages of ten
47051758500 Vinyl Black
47051758600 Urethane Clear
-
8/11/2019 GS Products Catalog 2013
11/40
www.brunswickbowling.com | 9
1 47055177001 Setting Table Assembly
1 47055166009 Setting Table Complete2 47245164001 Setting Table Harness3 47275620009 Setting Table Repair Kit4 47053513009 Toothed Rack (center)5 47051565002 Toothed Rack (front)6 47051635001 Geared Rack7 47861008001 Truss Hd. Screw 6mm x16mm8 47051625004 Shaft Support10 11051743001 Locknut6mm11 47071615004 Square Shaft Gear12 11051878001 Truss Hd. Screw 8mm x45mm13 47052021004 Spacer Bushing14 47052020004 Gear15 47052022004 Spacer Ring16 11052017001 Flat Washer 8.4mm
17 11051744001 Locknut8mm
18 11052019001 Flat Washer 8.4mm19 47051617004 Spacer Bushing20 47051616004 Gear21 47051682004 Stop22 11051877001 Truss Hd. Screw 6mm x25mm23 11051877001 Truss Hd. Screw 6mm x25mm24 47051632004 Gear25 47051633004 Spacer Bushing26 11052037001 Flat Washer 6.4mm27 47243027004 Switch - Complete28 47053812004 Switch Protector29 47055117009 Spotting Tong (1,4,5,6)29 47055118009 Spotting Tong (2,3,7,8,9,10)30 47054896002 R.H.Tong31 47055148002 L.H. Tong
32 47051758003 Damper
32 47051758600 AP - Oversized Urethane D32 47051758500 AP - Oversized PVC Damp33 47054902002 Deck Plate34 47054897003 L.H. Spotting Tong Pivot35 47054898003 R.H. Spotting Tong Pivot36 11053478001 Speed Nut 8mm37 47051762004 Connecting Link38 47054900003 LH Lever (1, 4, 5, 6)38 47054901003 RH Lever ( 2, 3, 7, 8, 9, 10)39 47054899003 Gear40 11054459000 Self Tapping,
Torx Screw K60x16mm
PART INDEX
1
GSX SETTING TABLEFull schematics are available
at www.brunswickbowling.com
-
8/11/2019 GS Products Catalog 2013
12/40
10 | www.brunswickbowling.com
G S > S E T T I N G T A B L E
TUBE GUIDE
Provides long-lasting consistentsupport for table seing and reseingof pins.
47085349003
SWITCH ACTUATOR
Improved pin holder switch actuationreliability. Flaer contact surface of theswitch actuator reduces double loadingof the seing table pinholders.
47054985001
MICRO SWITCH
OEM pin holder micro switches. Single, forGS 92and earlier, Double for GS 96and 98,and GSX for all GSX machines.
47054700004 Double (Shown large)
47053635004 Single, cherry
47055323004 GSX
47860015000 Series 478and below
PINHOLDER SOLENOID
Prevent seing table jams with
these solenoids. Solenoid comes with the plunger
Powerful solenoid made from highgrade iron
Designed to activate pin holder pingrippers properly long term
99060242004For tables with round swing shas
99060351004For tables with square swing shas
TECH TIP
If you receive a Multiple Spoing TongSwitch Error Code /76, you may wantto add a garden hose washer to the top
of the large gear at the le side of theseing table. By adding the garden hosewasher under the nut and washer, you
will prevent the gear rack from bouncing
o the stop blocks acting like a secondclutch for the gear racks.
GSX TABLE SAFETY SUPPORT
This support prevents the seing tablefrom falling while the pinseer is in thehome position for maintenance needs.It improves maintenance safety, andprevents pinseer damage.
Easily installs on pinseer
Only for use with the GSX Tower-downPinseers
Includes installation instructions
47860011000
GSX SWITCH FINGER
Prevent broken or worn switch ngerleading to pin loading errors with thisimproved design.
Allows for extended wear
Check pinholders for worn componentsregularly for ultimate performance
47054982002
PINHOLDER ASSEMBLY COMPLETE
47053850009- GS-10and GS-92(universal electrical system)
47054699009- GS-96- GS-98
47055314009- GS-X/CPO
PIN HOLDER WITH DAMPERS
47054689009- GS-10, GS-92, GS-96 GS-98
47054980201- GS-X/CPO
-
8/11/2019 GS Products Catalog 2013
13/40
www.brunswickbowling.com | 11
GSX SETTING TABLEFull schematics are available
at www.brunswickbowling.com
1 47050308004 Damper2 47054980201 Pin Holder w/Damper GS-X3 47054981002 Pin Gripper4 11055500001 Hex Nut 6mm5 47054986004 Grip Ring6 47054982002 Switch Finger7 47052124004 Counter Weight8 47055005004 Tension Spring9 47054984004 Gear10 47055323004 Micro Switch
11 47055001004 Clip (Micro Switch)12 47055008004 Tension Spring13 47054988003 Switch Button14 47054985001 Switch Actuator15 47055006004 Torsion Spring16 47055328003 Connector Clip17 47054983002 Drive18 47054987004 Solenoid Spring19 47055004004 Solenoid Plunger19 99090349004 O-Ring for Plunger
20 99060351004 Solenoid - Only21 47055785004 Mount Plate - Steel22 47055003004 Mount Plate23 47861040001 Washer 6.1mm (Pkg of10)24 11051014001 Hx Hd. Cap Screw 6mm x425 47860005000 Pivot Pin (Pkg of10)26 47054298001 Pin Detector Plate w/Pin27 47055314009 Pinholder Assembly - GS-
PART INDEX
1
-
8/11/2019 GS Products Catalog 2013
14/40
12 | www.brunswickbowling.com
G S > B A L L C U S H I O N & P I T C U R TA I N
BALL DOOR FLAP KIT
Minimize pins in the ball door.
47274888009
IMPACT STRIP
Inspect and keep damaged impact stripsreplaced at all times as part of normalmaintenance to the ball cushion assembly.
Damaged impact strips can lead topossible ball and pin damage
Made to withstand repeated ballimpacts to the pit cushion
47021010003
PIT CURTAIN
Smooth surface is easy to clean,non-marking, and oil resistant.
47021084004
BALL CUSHION BOARD WITH FACING
Minimize ball energy with thisspecial cushion facing.
Cushion molded to board toprevent delaminating
Includes 47274888009ball door ap kit
47025044009 LH
47025045009 RH
ADVANCED PERFORMANCE
BALL CUSHION FRAME
Eliminate risk of failed Ball CushionFrame with a design that conformsto stringent specications.
This frame has increased materialthickness where necessary
Made from high grade steel
Improved welding and shockmounting system
47025639009
ADVANCED PERFORMANCE
IMPACT STRIP (PAIR)
Lasts 35times longer than the originalimpact strips
Made from ultra-high molecular weightpolyethylene
Save time checking and replacing worn parts
Avoid costly damage from broken strips
47026102009
CUSHION ADJUSTMENTHARDWARE KIT
Reduce wear on the Cushion Rubber Bumper 11053578000 . Worn cushion bumpers cancreate ball return issues.
47862108000
BALL CUSHION HYDRAULIC SHOCK
ASSEMBLYCOMPLETE
Preserve pit cushions with properly maintained
shocks. For all GS pinseer models. 47861049009 Replacement O-Ring (5/pkg)
99026121000
-
8/11/2019 GS Products Catalog 2013
15/40
www.brunswickbowling.com | 13
GSX BALL CUSHION & PIT CURTAINFull schematics are available
at www.brunswickbowling.com
1 47025639009 AP - Ball Cushion Frame w/ Bracket2 47021872003 Top Ball Cushion Board3 47025045009 RH Ball Cushion Board
with Facing, even lane3 47025044009 LH Ball Cushion Board
with Facing, odd lane4 47274888009 Ball Door Flap Kit5 47021010003 Impact Strip (Black)6 11051055001 Hx Hd. Cap Screw 8mm x 60mm7 47023660004 Cap8 11052018001 Flat Washer 10.5mm9 11051744001 Locknut8mm10 11052618001 Carriage Bolt10mm x50mm11 11051745001 Locknut10mm
12 47020953004 Stop Collar13 99010108004 Bearing14 47020947003 Bearing Block15 11053578000 Rubber Bumper16 11051704001 Hex Nut 8mm17 47021466001 Bearing Block18 11051706001 Hex Nut 12mm19 47861010001 Flat Washer 13mm (Pkg of 20)20 11051703001 Hex Nut 10mm21 11051771001 Lockwasher 10mm22 11052050001 Flat Washer 10.5mm23 11051012001 Hx Hd. Cap Screw 10mm x70mm24 11051564009 Sckt Hd. Cap Screw 12mm x60mm25 11051772001 Lockwasher 12mm
26 47020948003 Transverse Bar26 47024077003 Transverse Bar, Short Pit27 47862108000 Cushion Adjustment Hard28 11052015001 Flat Washer 13mm29 47021110004 Spacer30 11051071001 Hex Hd. Cap ScrewM10 x631 47025638004 Spacer32 11051058001 Hex Hd. Cap Screw10mm x33 47071602004 Compression Spring34 99026121000 Ball Cushion Hydraulic Ass35 11055351000 Sealing Ring, all GS Shock36 47021108004 Spacer37 47025637003 Bracket
PART INDEX
-
8/11/2019 GS Products Catalog 2013
16/40
14 | www.brunswickbowling.com
G S > S W E E P W A G O N
SWEEP SHOCK ABSORBER
Strong plunger shamanufactured from highgrade steel.
Keeps GS sweep performingat a high level
47861049009Replacement O-Ring (5/pkg)
99046122000
SWEEP RELEASE ASSEMBLY
Complete assembly, including alllinkages and solenoid.
Easy to change and repair if necessary
47041794009 Tower Up
47045566009 Tower Down
PLASTIC ROLLER
Keeps the sweep wagonoperating smoothly.
99040249004
SWEEP WAGON FRAME
Built to provide years of serviceand smooth operation of thesweep assembly. Broken or bentframes may cause excess wear tothe plastic rollers or put stress onthe sweep drive motor to operateeectively.
47045010002
RETAINING CLIP (15MM)
A must have for the spare partsinventory, keeps the linkage inplace for smooth sweep operation.
11051869000
TECH TIP
Occasionally the sweep
on the GS pinseerwill stay down at the
end of a cycle causing
the pin light to stay
on and the pinseernot to generate an
error code on the
pinseer electronics.The problem can be
solved by reducing
the excessive swing
of the sweep release
assembly, adjusting the
sweep release tipper
position in relationship
to the tipper roller, and
adjusting the forward
position of the sweep.
GUTTER ADAPTER
OEM guer adapter for sweepboard. Now made of strongermaterial to last even longer.
47041721002
-
8/11/2019 GS Products Catalog 2013
17/40
www.brunswickbowling.com | 15
1 47045010002 Sweep Wagon (Frame only)2 47044927003 Sweep Board Only (Grey)
for GS-98, GS-X2 47044802009 Sweep Board w/Felt (Brown)3 47045082004 Sweep Board Decal (GS-98)3 47045373004 Sweep Board Decal (GS-X)4 11052601001 Carriage Bolt 8mm x 30mm5 11052614001 Carriage Bolt 6mm x 40mm6 47041721002 Gutter Adapter7 11052037001 Flat Washer 6.4mm8 11051743001 Locknut 6mm
9 47044979004 Rubber Bumper10 47044978004 Foot Cap11 11051744001 Locknut 8mm12 99040249004 Plastic Roller Assembly13 47861010001 Flat Washer 13mm (Pkg of 20)14 11051070001 Hx Hd. Cap Screw 12mm x 60mm15 11051747001 Locknut 12mm16 11051010001 Hx Hd. Cap Screw 8mm x 20mm17 11052019001 Flat Washer 8.4mm18 11051770001 Lockwasher 8mm19 47041774004 Bracket
20 47042056003 L.H. Pusher Rod21 11051869000 Retaining Ring 15mm22 99010103004 Plastic Bearing23 47861029001 Flat Washer 16mm (Pkg o24 11051852001 Retaining Ring 17mm25 47861011001 Flat Washer 17mm (Pkg of26 46040170004 Roller27 47041526004 R.H. Pusher Rod28 11052034001 Flat Washer29 11051786001 Cotter Pin
PART INDEX
GSX SWEEP WAGONFull schematics are available
at www.brunswickbowling.com
GS-**
GS-**
1
-
8/11/2019 GS Products Catalog 2013
18/40
16 | www.brunswickbowling.com
G S > D R I V E F R A M E A S S E M B LY
PINION SHAFT
Used in the pulley drive assembly toallow for correct operation of the up anddown movement of the seing table andcorrect liing of the sweep assembly atthe end of the pinseer cycle.
47071705004
GEAR ASSEMBLY WITH HUB
Used in conjunction with the pinion sha 47071705004in the pulley drive assembly
to allow for correct operation of the seingtable and sweep.
Supplied with hub for ease of replacement
47071702003
STROKE LIMITER SHOCK ABSORBER
Stroke limiter shock will ensure the seing tablefunctions correctly all the time.
Designed with no reservoir
Strong plunger sha manufactured from highgrade steel
47861049009 Replacement O-Ring (5/pkg) 99076123000 For series 442and below 99076120000 For series 443and above
VBELTS
Provide the important power necessary to run the
GS machines. Oers increased exibility and reducesheat build-up that extends the life of the belt.
11053901000 10mm x6mm x875mm Distributor Sweep/Motor Drive
11053902000 10mm x6mm x1160mm Setting Table Drive
11053903000 13mm x8mm x1375mm Distributor Shaft Drive
11053904000 10mm x6mm x950mm Ball Accelerator 50Cycle
11053905000 10mm x6mm x1900mm Elevator Drive
11053907000 10mm x6mm x925mm Ball Accelerator 60Cycle
11053909000 10mm x6mm x2560mm Transport Band Drive (110mm Pulley)
11053910000 10mm x6mm x2650mm Transport Band Drive (125mm Pulley)
DRIVE MOTORS
Designed and tested to meet themost rigorous requirements.
Available in two dierent voltagesto meet multiple needs
Seing table and sweep motors includeheavy duty brake for improved reliabilityand durability
OEM design
Sweep Motor 99040293004 1/4H.P. 208VAC 99040241004 1/4H.P. 230/380VAC (Shown)
Distributor Motor 99040295004 1/2H.P. 208VAC 99040113002 1/2H.P. 230/380VAC (Shown)
Table Motor 99040294004 1/2H.P. 208VAC (Shown) 99040116002 1/2H.P. 230/380VAC
GS MOTOR STRAIN RELIEF
Used on both ABT and Siemens Motorsand on all GS Series pinseers.
11055080000
ADVANCED PERFORMANCE
GS METAL PINION GEAR
Used on all Tower Up pinseers.
Heavy-duty Seing Table pinion gearreplaces the OEM plastic gear forextended life and beer performance
47071449609
ADVANCED PERFORMANCE
CHAIN GEAR
Based on eld feedback, this newlyre-designed assembly includes two set screwsto reduce stress on the gear, key, and sha.
Compatible with all GS-Series Tower DownPinseer models
Now standard on production pinseers
series 687and above Metric Key 11053503000for gear
47075474009
-
8/11/2019 GS Products Catalog 2013
19/40
www.brunswickbowling.com | 17
GSX DRIVE FRAME ASSEMBLYFull schematics are available
at www.brunswickbowling.com
1 11053507000 Key 8mm x7mm x3mm2 47075476004 Shaft3 47085348003 Bearing Housing4 11430051000 Bearing5 11430052000 Bearing6 47075482002 Guide Beam7 11053507000 Key 8mm x7mm x30mm8 47071591004 Sprocket Shaft9 47075488004 5/8" Chain10 11051852001 Retaining Ring 17mm11 47011053004 Sprocket12 11600500000 Master Link (3-Piece)13 47070386004 Counter Weight14 47075486004 Chain15 11051856001 Retaining Ring 25mm
16 47075474009 AP - Chain Gear (with set screws)17 47075473003 Switch Support18 47243028004 OOR Switch Tower Down19 47085449003 Support Rod20 47085349003 Tube Guide21 47085436003 R.H. Guide Support Bracket21 47085430003 L.H. Guide Support Bracket22 11051070001 Hx Hd Cap Screw 12mm x60mm23 47075356003 Crank24 11051747001 Locknut 12mm25 47861031001 Flat Washer 18mm (Pkg of 10)26 47075352004 Pivot Bearing27 11051062001 Hx Hd Cap Screw 12mm x25mm28 11051772001 Lockwasher 12mm29 47861010001 Flat Washer 13mm (Pkg of 20)
30 47075357003 Crank Arm31 11054300001 Cotter Pin 2mm32 11053493000 Key 8mm x7mm x45mm33 47243028004 TS-2Switch34 47243028004 Cherry Switch
(Silver, Consolidated, Nex Ge34 47073534004 A Switch (Red Box)35 47243029004 Magnetic B, C, D Switch
(Silver, Consolidated, Nex Ge35 47072307004 Reed Switch (Red Box)36 47071879003 Cam37 47075188001 Frame (Fixed B-Switch)37 47071876001 Frame (Adjustable B-Switch)
PART INDEX
-
8/11/2019 GS Products Catalog 2013
20/40
18 | www.brunswickbowling.com
G S > D I S T R I B U T O R
UNIVERSAL RELEASE LEVER
Wider buon improves performanceby minimizing release levers slipping
o pin grippers. Used on all universalpin stations.
47095154009 Complete
47094782003 Buon only
SQUARE SPINDLE
Prevent pin station housing andretaining pin wear with this squarespindle complete with a bushing oneach end.
47094790009
RETAINING BOW EXTENDER SLEEVE
Minimizes pin station jams.
No more diving pins in the4,7,10positions
Packaged 6per pack
47862931000
REAR DISTRIBUTOR DRIVE PULLEY
OEM pulley 162mm for 15mmpolycord belt.
47024839002
UNIVERSAL PIN STATION
Redesigned with an improved steelpin release lever aachment pivot.
Universal Housing Only 47094778001
Steel Sha 47861045000 (Pkg of 10)
Retaining Ring 47861044000 (Pkg of 20)
Plastic Retaining BowBushing 47861043000 (Pkg of 10)
47094792009 2, 3, 4, 8, 9pin location (shown large)
47094793009 1, 5, 6pin location (not shown)
47094794009 7, 10 pin location (not shown)
SLIDER ASSEMBLY
Long design improves reliability bycentering pin movement to the pin holder.
Minimizes distributor jams and tableswitch problems
Manufactured from impact resistantpolyethylene
Easy to install
47091284002 Complete
47091277002 Mount only
47095609002 Slider only
TWOPIECE SPUR GEAR
Prevent pinseer down situationsby keeping a couple of easy to installtwo-piece gears on hand. These are
great temporary replacements thatdo not require removal of the frontor rear distributor sha for installation.
Hardware included
To order permanent replacements:Spur Gear 47090547004 forFront Distributor GearSpur Gear 47093900003 forRear Distributor Gear
47275746009 Front Distributor Sha
47274669004 Rear Distributor Sha
-
8/11/2019 GS Products Catalog 2013
21/40
www.brunswickbowling.com | 19
GSX DISTRIBUTORFull schematics are available
at www.brunswickbowling.com
1 47092206004 Shaft2 11051018001 Hex Head Screw6mm x20mm3 11052037001 Flat Washer6.4mm4 47094712003 Bracket5 11051743001 Locknut6mm6 47093587004 Dowel Pin3mm x15mm7 47090969003 Pin Stop8 47093760002 Pin Shield (7)8 47091890002 Pin Shield (2, 3, 8, 9, 10)8 47092211002 Pin Shield (1, 6)9 47095609002 Slider Only10 11051515001 Socket Head Screw6mm x18mm11 11051520001 Socket Head Screw6mm x20mm12 47091277002 Slider Mount
13 11052019001 Flat Washer8.4mm14 11054449000 Hx Hd. Self-Tapping Screw K70x18mm15 47091284002 Slider Assembly Complete16 47092415003 Pulley with Bearing17 11051852001 Retaining Ring17mm18 11051546001 Hex Head Screw5mm x40mm19 47092300004 Polycord12mm x44meters Lg19 47092300005 Polycord13mm x20meters Lg20 47093547004 Gear21 11052039001 Flat Washer5.3mm22 11051742001 Locknut5mm23 11051856001 Retaining Ring25mm24 47861028001 Shim Washer25mm x36mm x1mm25 11053903000 V-Belt13mm x8mm x1375mm
26 47090989002 Double Pulley27 47094353004 PVC Spacer28 47094346003 Bearing Shell w/ Shoul29 11430013000 Bearing30 47094351003 Washer31 47093863003 Round Belt Pulley31 47275748009 2-Piece Pulley Repair K32 47093874004 Clamp33 47094347003 Bearing Shell34 47095050003 Plastic Bearing35 47090547004 Spur Gear w/25mm Co35 47275746009 Two Piece Gear Kit36 47094349001 Front Shaft Assembly37 47275730009 Distributor Repair Kit
PART INDEX
DISTRIBUTOR
REPAIR KIT INCLUDES
HARDWARE
-
8/11/2019 GS Products Catalog 2013
22/40
20 | www.brunswickbowling.com
G S > D I S T R I B U T O R
GSX SHARK FIN
Machined with strong material toimprove the durability of the shark n.
47095106001
RUBBER MOUNT
Absorbs vibration between theelevator and shark assembly whilehelping to prevent wear of theassemblies.
11053579000
SOLENOID
GSX original equipment sharkswitch solenoid.
99060387004
POLYCORD 15MM
Minimize pins in ball door with morepower and speed.
Made from non-stretch high gradepolyurethane
See page 28for belt trim tool
47024838005 7meter length
ROUND BELT GEARED PULLEY
GSX original equipment shark switchrear geared pulley assembly.
47095744004
POLYCORD 12MM
Use the original distributor belt.
Minimal stretching for increased lifeand performance
See page 28for belt trim tool
47275804009 20meter length
47092300004 44 meter length
SMART SHARK GUIDES
Complete with a radius at thebed to prevent cracking.
47095103001 LH
47095104001 RH
POLYCORD 13MM
Improve distributor performance with alarger diameter polycord.
Improve pin transfer throughout therecomended distributor
See page 28for belt trim tool
4709230000520meter length
-
8/11/2019 GS Products Catalog 2013
23/40
www.brunswickbowling.com | 21
GSX DISTRIBUTORFull schematics are available
at www.brunswickbowling.com
1 47095108001 Shark Switch Assembly2 11051026001 Hex Head. Screw 8mm x40mm3 11051770001 Lock Washer 8mm4 11052019001 Flat Washer 8.4mm5 47093925004 Spacer6 47093906001 R.H. Pin Guide Wedge7 11051744001 Lock Nut 8mm8 11052006001 Washer 8.4mm9 11051704001 Hex Nut 8mm
10 47095104001 R.H.Guide11 11051010001 Hex Hd. Cap Screw8mm x20mm12 47095106001 Fin Switch13 11053579000 Rubber Mount14 47092300004 Polycord 12mm x44Meters Lg15 11430007000 Bearing16 99090348004 Spring17 47095111004 Solenoid Plunger18 99060387004 Solenoid Consolidated/Nex Gen
19 47095103001 L.H. Guide20 47093929001 L.H. Pin Guide Wedge21 11051081001 Hex Head. Screw8mm x1022 47095112004 Spacer - short23 47095109004 Spacer - long24 47095105003 Slide25 47095107003 Housing26 47095744004 Round Belt Geared Pulley
PART INDEX
1
-
8/11/2019 GS Products Catalog 2013
24/40
22 | www.brunswickbowling.com
OVERFLOW CHUTE PIN WIPE FOR
METAL CHUTE
Improve pin performance by keepingthem clean with this easy to install,long lasting, and washable Pin Wipe.
Cloth ts the metal overow chuteused on GSX pinseers
Packaged one per bag
47092527000
G S > D I S T R I B U T O R
OEM OVERFLOW SOCK
Improved OEM sock has a lockingstrap to keep socks from swingingexcessively as pins exit.
Help prevent pin and transport bandwear
Oers a reinforced boom, slowingpin entrance onto the transport band
47022531000
GSX PIN CLEANER KIT MOP COVERS
Improve pin appearance while removingdirt from your system.
Contains two mop covers and instructions
Replacement mop covers for OverowSock Pin Cleaner Kit - 47275812009
47860012000 Pkg of 2
ADVANCED PERFORMANCE
OVERFLOW CHUTE PIN WIPE
FOR PLASTIC CHUTE
Improve cleanliness andperformance of pins with this easyto install, long lasting and washableadvanced pin wipe.
Used on GS machines, series 406and above, including GSX
Cloth ts the plastic overow chuteused on GSX pinseers
Packaged 2cloths per bag
47860003000
OVERFLOW CHUTE ASSEMBLY WITHOUT SOCK
Prevent disruption in distributor overow.
Polyethylene design eliminates noise
Shock mounted for durability
47095739009 LH
47095740009 RH
ADVANCED PERFORMANCE
OVERFLOW SOCK PIN CLEANER KIT
Improve pin appearance with this easyto install and maintain pin cleaner.
Mounting plates eliminate need forVelcro
Pockets on both sides of mountingplates allowing cover to be ippedwhen one side is dirty
47275812009
ADVANCED PERFORMANCE
OVERFLOW CHUTE UPGRADE KIT
Reduces stress by using cushionedmounts to secure the front and rearof the overow chutes to the mountinglocations of the pinseer. Must be usedwith: L.H. Overow Chute 47095738001and R.H. Overow Chutes 47095737001.Includes all mounting hardware andinstructions to upgrade older style chutes.NOTE:Overow Chutes 47095739009
and 47095740009must be replaced withthe overow chute numbers above whenusing this upgrade kit.
47275731009
-
8/11/2019 GS Products Catalog 2013
25/40
www.brunswickbowling.com | 23
GSX DISTRIBUTORFull schematics are available
at www.brunswickbowling.com
1 47095740009`R.H. Chute Assembly w/out Sock1 47095739009 L.H Chute Assembly w/out Sock2 47095738001 L.H. Plastic Chute - Only2 47095737001 R.H. Plastic Chute - Only3 47860003000 AP - Pin Wipe4 47095727004 Pressure Plate5 11051743001 Locknut 6mm6 47861001001 R.O. Hex Hd. Cap Screw
5mm x 25mm (Pkg of10)
7 11052039001 Flat Washer 5.3mm8 11052938001 Flat Hd. Screw 8mm x 12mm9 47095726004 Mounting Plate10 11053588000 Rubber Bumper 30mm x 20mm11 11051742001 Locknut 5mm12 47095728004 Angle Bracket13 11051744001 Locknut 8mm14 11051038001 Hex Hd. Cap Screw8mm x 16mm
15 47093749004 Bracket16 11603301000 Overflow Chute Clamp17 47022531000 Sock (Black)17 47092529600 Sock - Heavy Duty (White)18 11053587000 Rubber Bumper 25mm x 119 47095729004 Mounting Bracket20 11051035001 Hex Hd. Cap Screw 6mm x
PART INDEX
-
8/11/2019 GS Products Catalog 2013
26/40
24 | www.brunswickbowling.com
G S > B A L L A C C E L E R A T O R
ACCELERATOR MOTOR208/230/380
GSX original equipment acceleratormotor.
Rigorously tested to assure long life
For series 420and below, order motor99040295004
99030363004
TENSION SPRING (BALL DOOR)
Stretched or weak tension springs cancause ball calls at the ball door. Replacethis spring with new for optimal operation.
47034767004
EJOTPLASTIC NUTS 3.5
Keep your ball door protector plate tight
with these nut plates. Replace loose, stripped or broken nut
plates with new to keep your Ball DoorProtect Plate from failing prematurely
11055800000
MOUNT BUSHING FOR ACCELERATOR MOTOR
Accelerator Motor Mount Bushing for GSseries 419and below
Keep your accelerator belt adjusted properlyand motor moving freely by replacing thesebushings
99010123004
PROTECTOR WEDGE
Upper Ball Door Protector Wedges.
Missing or broken protector wedges cancause ball, pin and ball door assemblydamage
Check and replace when worn
47021620002 LH
47021619002 RH
PROTECTIVE COVER
Used to protect the ball rods of theaccelerator.
Defective or broken protective coverscan lead to scratching bowling balls
Allows for smooth transition from theball accelerator to the return track
Pack of 4
47862787000
BALL DOOR SOLENOID
Original equipment Ball Door Solenoid. Powerful solenoid made from high
grade iron
Designed to activate ball doormechanism under the highest load
Designed housing minimizesmalfunction due to dirty/oilyenvironmental conditions
Also used in GS Drive Frame Assemblyand Sweep Release Assembly
99070356004
ACCELERATOR NONSLIP PLATE
Provides a secure surface for walking
and climbing on top of accelerator. Canbe installed on any GS pinseer.
47862932000
ACCELERATOR FLAT BELT
Minimizes stretching to ensure long life.Produced from engineered materials.
10635127000
PROTECTOR PLATES
Protects the ball doors from directimpact from pins and bowling balls.
47035240001 L.H. 10Pin Side (Shown) 47035241001 R.H. 7Pin Side
-
8/11/2019 GS Products Catalog 2013
27/40
www.brunswickbowling.com | 25
GSX BALL ACCELERATORFull schematics are available
at www.brunswickbowling.com
1 47862932000 Accelerator Non-Slip Plate2 11054466000 Plastic Fastener Screw3 47035240001 Protector Plate,10pin side3 47035241001 Protector Plate,7pin side4 47031796002 Holder5 99060219004 Solenoid Assembly
6 47031797002 Locking Bolt7 47033558009 RH Locking Mechanism Complete7 47033557009 LH Locking Mechanism Complete8 47031822004 Lever9 47030276004 Ball Door Arm Tension Spring10 47031058001 Arm (use for RH and LH)
11 47031056003 LH Ball Door Key11 47031055003 RH Ball Door Key12 47031054002 Ball Door (use for RH and L13 47033556009 RH Ball Door with Arm13 47033555009 LH Ball Door with Arm
PART INDEX
-
8/11/2019 GS Products Catalog 2013
28/40
26 | www.brunswickbowling.com
G S > E L E C T R I C A L B O X
TRANSFORMER ASSEMBLY SINGLE
Insure you have the correct power for criticalelectronic functions of the GSX pinseer.
Direct replacement for GSX Nex Gen Boxesequipped with a single transformer
47142659000
GSX FUSES
Make sure you have the correct amp fuses at all times.This is a must have for your spare parts inventory.
Using the incorrect fuse may lead to CPUor High voltage PCB failures
All fuses come 5per package
3.15 AMP FUSE
Used to protect the output functions
of the CPU PCB. 47862854000
8 AMP CERAMIC FUSE
Used on the High Voltage PCB, these fusesprotect the clockwise and counter clockwisedirectional phases of the table motor for apair of pinseers.
47862855000
EMERGENCY STOP CONTACTOR
Used in conjunction with the emergencystop switches on the p inseer, this will killpower to both pinseers. This is a must havefor your spare parts inventory for the GSXpinseer.
47142712000
LCD NEX GEN PACKAGE
Direct replacement for the LCD display ofthe Nex Gen box. Includes wiring harness.
47862100000
TRANSFORMER ASSEMBLY DOUBLE
Direct replacement for GSXNex Gen boxes equippedwith two transformers.
47142692000
TECH TIP
If you are unable to scroll through the dierent modes on thekeypad of the Nex Gen box, check the reset buon on theFrameworx ball rack. The reset buon may be stuck in thepushed in position and needs to reset to the normal position.
EMERGENCY STOP UPGRADE KIT
Safety is the number one priority whileworking on or around pinseers. This kitwill add emergency stop switches andmotor contactor functions to older GSXpinseers.
Includes complete instructions and all partsneeded to upgrade one pair of pinseers
47862867000
.5 AMP SLOW BLOW FUSE
Used on the High Voltage PCB to protectthe pin light circuitry.
47862856000
ADVANCED PERFORMANCE
REAR DISPLAY PACKAGE FOR
GS CONSOLIDATED ELECTRONICS
PINSETTERS
This was designed to allow thefunctions of the consolidated box tobe located at the rear of the pinseer.Comes complete with all mountinghardware and rear display for easymounting to the elevator.
47861046000
ADVANCED PERFORMANCE
NEX GEN REAR DISPLAY PACKAGE
Very useful upgrade for customers toallow all functions of the Nex Gen boxto be performed from the rear of the pinseer.Mounts to the elevator of the pinseer,mounting hardware included. Perfect for
centers where the sot wall interferes withdirect access to theNex Gen Box mounted at the front of thepinseer.
47861048401
11616034000 Replacement Toggle Switch
47862877402 Nex Gen Firmware (4.95.26)
-
8/11/2019 GS Products Catalog 2013
29/40
www.brunswickbowling.com | 27
GSX ELECTRICAL BOXFull schematics are available
at www.brunswickbowling.com
1 47862866402 Nex Gen Controller Assembly2 47862857000 Keyboard Membrane3 11615511000 ON/OFF Toggle Switch w/Nut4 47142594000 Switch Guard5 47142664000 LH Pin Light Power Cable6 47142660000 Black Power Switch/Cable
(single transformer Nex Gen)7 47142663000 AC Power In Cable Assembly8 47142659000 Harness Transformer Assembly8 47142692000 Transformer/Harness - Double
(Dual Transformer Nex Gen)
9 47142657000 LH Harness Deck PowerMotor Assmbly
10 47142661000 LH Harness Sweep MotorPower Assembly
11 47142657010 RH Harness Deck PowerMotor Assmbly
12 47142661010 RH Harness Sweep MotorPower Assembly
13 47142664010 RH Pin Light Power Cable14 47142736402 CPU PCB Nex Gen Controller15 47862854000 Fuse 3.15A, 250V(Pkg of 5)
16 47862855000 Fuse 8A 250V, Fast Blow (Pk17 47862856000 Fuse .5A, 250V, Slow Blow (P18 47142700000 CPU to High Voltage Logic
Cable Assembly 14"19 47862859000 High Voltage PCB Nex Gen C20 47142693000 Transformer to CPU Cable21 47862863000 I/O PCB Assembly22 11615048000 Lockout Power Switch - Red
PART INDEX
-
8/11/2019 GS Products Catalog 2013
30/40
28 | www.brunswickbowling.com
G S > T O O L S & M A I N T E N A N C E
NONLITHIUM GREASE
Recommended grease for GS pinseers.
Lubricate parts appropriately
For use on non-metal parts
11676361000
SPUD WRENCH
This tool combines 13mm and 17mmtwelve point sockets in one tool. Use onetool for GS pinseer maintenance.
47900011000
POLYCORD ROUND BELT TRIM TOOL
Makes the trimming process painless.Simply wrap the tool around the weldbead, rotate the tool and cut the oldbead away.
47860009000
47860009001 Replacement Blades - Pkg of 2
GAUGE BLOCK
Perform GS adjustments with this easy to useall-in-one tool. Use for pin detector, seing
table lowest position, seing table highestposition, transport band tension spring, pincount switch, shovel guide, distributor guidewedge to elevator adjustments and more.
47900012000METRIC TOOL KIT
All the metric tools needed tomaintain the GS pinseer.
47273865009
METRIC HARDWARE KIT
Includes everything needed toservice a GS pinseer. Includes1,316pieces of 126commonly usedhardware items: Chain Links, HexHead Cap Screws, Coer Pins,Socket Head Cap Screws, Hex Nuts,Self Locking Nuts, Lock Washers,Internal and External RetainingRings, Roll Pins, Speed Nuts, FlatWashers, Keys, and Allen Wrench set.
47860002000
-
8/11/2019 GS Products Catalog 2013
31/40
www.brunswickbowling.com | 29
BELT WELD KITS
This kit contains all the items neededto repair a poly cord. Kit contains beltwelding iron, belt welding clamp, andbelt cuer. Also available separately:
47094208004Belt Welding Iron Only 220v
47094211004Iron Only 110v
47093876004 Belt Cuer
47862770000Belt Welding Clamp
47096295004 OEM Replacement Tipfor 110and 220volt
47093877004 220 volt kit
47094206004 110 volt kit (Shown)
GS ELECTRICAL TOOL KIT
This kit contains all the specialtools required to remove andreplace all the cable terminalsassociated with theGSX-X pinseer. Includes:Molexextractor, Molex Crimper,Miller Cuer/Stripper, RoundExtractor, Digital Multi-meter,Molex Terminals, Femail Mini
Fit Terminals, Pin Terminals, andother extraction tools.
47862804000
TERMINAL37 PIN ON SETTING TABLE 11615101000 Male
GS PREVENTATIVE MAINTENANCEWALL CHART
Reusable 24" x 36" chart showsBrunswicks recommendedpreventative maintenance schedulefor daily, weekly, monthly, quarterly,bi-yearly, and yearly items.
Allows for recording of progressusing water-soluble markers.
Marks wipe o easily using a dampcloth.
47902401000
BELT WELDING INSTALLATION TOOL
Makes it easy to properly tensionbelts while in place on the pinseer.Instructions included.
47860001000
CABLE TERMINAL TOOLS
Required tools for repairingGS pinseer cable connectors.
57900102000 Molex round extractor
57900103000 Molex Crimper
57900108000 Miller Cuer/Stripper
NYOGEL 788 LUBRICANT
Prevent damage to plastic parts byusing the correct type of lubricants.
Used to lubricate pin station pivotpoints in the distributor area oranywhere plastic part pivot pointsneed lubrication
Also used in old style pin ball wizardmotors with plastic internal gearing
11676308000
BALLAST
For 230volt Pinlight.
47226294004 OEM Replacement
-
8/11/2019 GS Products Catalog 2013
32/40
30 | www.brunswickbowling.com
10-635 127-000 ACCELERATOR FLAT BELT 24
11-051010-001 HEX HEAD CAP SCREW 8MM X 20MM 15, 21
11-051012-001 HEX HEAD CAP SCREW 10MM X 70MM 13
11-0510 14-00 1 HEX HEAD CAP SCREW 6MM X 45MM 11
11-051018-001 HEX HEAD CAP SCREW 6MM X 20MM 19
11-051026-001 HEX HEAD CAP SCREW 8MM X 40MM 21
11-051035-001 HEX HEAD CAP SCREW 6MM X 16MM 23
11-051038-001 HEX HEAD CAP SCREW 8MM X 16MM 23
11-051055-001 HEX HEAD CAP SCREW 8MM X 60MM 13
11-051058-001 HEX HEAD CAP SCREW 10MM X 55MM 13
11-051062-001 HEX HEAD CAP SCREW 12MM X 25MM 17
11-051070-001 HEX HEAD CAP SCREW 12MM X 60MM 15, 17
11-051071-001 HEX HEAD CAP SCREW M10 X 60MM 13
11-051081-001 HEX HEAD CAP SCREW 8MM X 100MM 21
11-0515 15-001 SOCKET HEAD SCREW 6MM X 18MM 19
11-051520-001 SOCKET HEAD SCREW 6MM X 20MM 19
11-051546-001 HEX HEAD CAP SCREW 5MM X 40MM 19
11-051564-009 SOCKET HEAD SCREW 12MM X 60MM 13
11-051703-001 HEX NUT 10MM 7, 13
11-051704-001 HEX NUT 8MM 13, 21
11-051706-001 HEX NUT 12MM 13
11-051742-00 1 LOCKNUT 5MM 19, 23
11-051743-00 1 LOCKNUT 6MM 9, 15, 19, 23
11-051744- 001 LOCKNUT 8MM 9, 13, 15, 21, 23
11-051745-00 1 LOCKNUT 10MM 13
11-051747-001 LOCKNUT 12MM 15, 17
11-051770-001 LOCKWASHER 8MM 15, 21
11-051771-001 LOCKWASHER 10MM 13
11-051772-001 LOCKWASHER 12MM 13, 17
11-051786-001 COTTER PIN 15
11-0518 52-001 RETAINING RING 17MM 15,
17,
1911-0518 56-0 01 RETAINING RING 25MM 17, 19
11-0518 58-0 01 RETAINING RING 15MM 7
11-0518 69-00 0 RETAINING RING 15MM 14, 15
11-0518 77-001 TRUSS HD. SCREW 6MM X 25MM 9
11-0518 78-00 1 TRUSS HEAD SCREW 8MM X 45MM 9
11-0519 02-001 RETAINING RING 52MM 7
11-052006-001 WASHER 8.4MM 21
11-052015 -001 FLAT WASHER 13MM 13
11-05201 7-001 FLAT WASHER 8.4MM 9
11-05201 8-00 1 FLAT WASHER 10.5MM 13
11-052019 -001 FLAT WASHER 8.4MM 7, 9, 15, 19, 21
11-05203 4-00 1 FLAT WASHER 15
11-052037- 001 FLAT WASHER 6.4MM 9, 15, 19
11-052039 -001 FLAT WASHER 5.3MM 19, 23
11-052050 -001 FLAT WASHER 10.5MM 7, 13
11-052150 -001 FINISHING WASHER 8MM (GS-92) 7
11-052401- 001 SLOTED PAN HEAD SCREW 8MM X 50MM (GS-92) 7
11-05260 1-001 CARRIAGE BOLT 8MM X 30MM 15
11-0526 14-00 1 C ARRIAGE BOLT 6MM X 40MM 15
11-0526 18-00 1 CARRIAGE BOLT 10MM X 50MM 13
11-052929 -000 SLOTED PAN HEAD SCREW 10MM X 50MM 7
11-052930-000 HEX HEAD CAP SCREW 10MM X 60MM 7
11-05293 8-001 FLAT HEAD SCREW 8MM X 12MM 23
11-053478-001 SPEED NUT 8MM 9
11-053493 -000 KEY 8MM X 7MM X 45MM 17
11-053503-000 METRIC KEY 16
11-053507- 000 KEY 8MM X 7MM X 30MM 17
11-05357 8-000 CUSHION RUBBER BUMPER 12, 13
11-053579-000 RUBBER MOUNT 20, 21
11-0535 81-00 0 OEM TRANSPORT BAND - LONG PIT 3, 6
11-0535 87-000 RUBBER BUMPER 25MM X 15MM 23
11-053588-000 RUBBER BUMPER 30MM X 20MM 23
11-0539 01-00 0 V-BELT 16
11-0539 02-000 V-BELT 16
11-0539 03-000 V-BELT 16, 19
11-0539 04-0 00 V-BELT 16
11-0539 05-000 V-BELT 16
11-0539 07-000 V-BELT 16
11-053909-000 V-BELT 7, 16
11-0539 10-00 0 V-BELT 7, 16
11-054300-001 COTTER PIN 2MM 17
11-054 449- 000 HEX HEAD SELF-TAPPING SCREW K70 X 18MM 19
11-054 459-000 SELF TAPPING, TORX SCREW K60 X 16MM 9
11-054466-000 PLASTIC FASTENER SCREW 25
11-055351-000 SEALING RING, ALL GS SHOCKS 13
11-055500-001 HEX NUT 6MM 11
11-0558 00-0 00 EJOT-PLASTIC NUTS 3.5 24
11-135400 -000 RUBBER WELL NUT, SERIES 43-76 7
11-430007-000 BALL BEARING 21
11-430013-000 BALL BEARING 19
11-430051-000 BALL BEARING 17
11-430052-000 BALL BEARING 17
11-430055- 000 DEEP GROOVE BALL BEARING 711-600500-000 MASTER LINK (3-PIECE) 17
11-603301-000 OVERFLOW CHUTE CLAMP 23
11-6150 48-0 00 LOCKOUT POWER SWITCH - RED 27
11-615 101-0 00 TERMINAL-37 PIN ON SETTING TABLE 29
11-6155 11-00 0 ON/OF F TOGGLE SWITCH W/NUT 27
11-616034-000 REPLACEMENT TOGGLE SWITCH 26
11-6352 01-000 AP - OEM TRANSPORT BAND BELT 3, 6, 7
11-6352 01-100 CERTIFIED TRANSPORT BAND BELT 6, 7
11-676308-000 NYOGEL 788 LUBRICANT 29
11-676361-000 NON-LITHIUM GREASE 28
11-682569-000 NO STEP STICKER 4
46-040170-004 ROLLER 15
47-011049- 001 PIN SHOVEL ONLY 5
47-011053-004 DEFLECTION CHAIN GEAR 5, 17
47-011130 -004 BEARING BOLT 5
47-013532-0 09 PIN SHOVEL ASSEMBLY 5
47-013817-0 04 STATUS LIGHT BULB 4
47-01387 1-004 MASTER LINK WITH PIN 4
47-013872- 004 ELEVATOR CHAIN BREAK TOOL 4
47-013873 -004 ELEVATOR CHAIN REPAIR KIT 4
47-013951- 003 WEDGE GUIDE 5
47-013990 -002 ELEVATOR GUARD 5
PART # DESCRIPTION PAGE PART # DESCRIPTION PAGE
-
8/11/2019 GS Products Catalog 2013
33/40
www.brunswickbowling.com | 31
47-013991- 001 RH FRONT PIN DEFLECTOR 5
47-013992-0 01 LH FRONT PIN DEFLECTOR 5
47-014008-003 5/8 CHAIN W/ SHOVEL PINS 5
47-014009 -004 SPACER 5
47-014017-0 03 SHOVEL GUIDE 5
47-014060-003 EJECTOR 5
47-01468 7-004 TROUBLE LIGHT ASSEMBLY - CONSOLIDATED 4, 5
47-014761-0 03 CENTERING GUIDES 5
47-014917-009 PIN COUNT SWITCH - GS 96 AND PRIOR 5
47-014918- 003 GS 98/GSX 5
47-014921-0 00 REPLACEMEN T ARM FOR PIN COUNTER SWITCH 5
47-015646 -004 TROUBLE LIGHT ASSEMBLY - NEX GEN 4, 5
47-020908 -003 END CAP W/BEARING (2-STUD) 7
47-020942-003 ROLLER 7
47-020943- 004 ROLLER BUSHING 7
47-020947-00 3 BEARING BLOCK 13
47-020948-003 TRANSVERSE BAR 13
47-020953-004 STOP COLLAR 13
47-021010 -003 IMPACT STRIP 12, 13
47-02108 4-00 4 PIT CURTAIN 12
47-021108-004 SPACER 13
47-021110-004 SPACER 13
47-021466-001 BEARING BLOCK 13
47-021619 -002 PROTECTOR WEDGE - RH 24
47-021620 -002 PROTECTOR WEDGE - LH 24
47-021872- 003 TOP BALL CUSHION BOARD 13
47-022531-000 OEM OVERFLOW SOCK 22, 23
47-023660-004 CUSHION CAP 5, 13
47-023663 -004 RUBBER WASHER (GS-92) 7
47-023915- 004 RUBBER SPACER 7
47-023933-004 SHAFT - FRONT 747-023959- 003 FRONT BOARD ASSEMBLY 7
47-023981 -002 ROLLER ASSY, 3-STUD (FRONT) 7
47-023982- 004 SPACER BUSHING - 13MM 7
47-023986-001 RH PIN DEFLECTOR 5
47-023987-0 01 LH PIN DEFLECTOR 5
47-024004- 003 V-BELT PULLEY 6
47-024036- 002 PIN DEFLECTOR SUPPORT BRACKET 5
47-024077-003 TRANSVER SE BAR, SHORT PIT 13
47-024093-0 04 THREADED ROD 10MM X 140MM 6, 7
47-024094-003 HOUSING 7
47-024309-00 4 SPRING 7
47-024330-00 4 V-BELT PULLEY 100MM 7
47-024735-00 9 RH TRANSPORT BAND SIDE FRAME 7
47-024736-0 09 LH TRANSPORT BAND SIDE FRAME 7
47-024739-0 04 RUBBER WASHER (GS-96 & ABOVE) 7
47-024740-004 FINISHING WASHER 5.3MM X 28MM X 10.2MM 7
47-024741-004 FLAT WASHER (GS-96 & ABOVE) 7
47-024744-009 BOARD SCREW KIT 10MM 7
47-024838- 005 POLYCORD 15MM 20
47-024839- 002 REAR DISTRIBUTOR DRIVE PULLEY 18
47-024905-001 RH SHORT ROLLER ASSY (REAR) 7
47-025044 -009 BALL CUSHION BOARD WITH FACING - LH 12, 13
47-025045-0 09 BALL CUSHION BOARD WITH FACING - RH 12, 13
47-025049- 004 V-BELT PULLEY 125MM 7
47-025051- 001 LH SHORT ROLLER ASSY (REAR) 7
47-025157-00 4 SPACER BUSHING - 21MM 7
47-025175- 003 LH REAR BOARD ASSY, ODD LANE 7
47-025176- 003 RH REAR BOARD ASSY, EVEN LANE 7
47-025178-003 BEARING (3-STUD) 7
47-025638 -004 SPACER 13
47-025639 -009 AP - BALL CUSHION FRAME WITH BRACKET 12, 13
47-026102- 009 IMPACT STRIP (PAIR) 3, 12
47-030276- 004 BALL DOOR ARM TENSION SPRING 25
47-031054- 002 BALL DOOR (USE FOR RH AND LH) 25
47-031055-0 03 RH BALL DOOR KEY 25
47-031056-003 LH BALL DOOR KEY 25
47-031058- 001 ARM (USE FOR RH AND LH) 25
47-031796-002 HOLDER 25
47-031797-002 LOCKING BOLT 25
47-031822-004 LEVER 25
47-033555-0 09 LH BALL DOOR WITH ARM 25
47-033556- 009 RH BALL DOOR WITH ARM 25
47-033557-009 LH LOCKING MECHANISM COMPLETE 25
47-033558- 009 RH LOCKING MECHANISM COMPLETE 25
47-034767-00 4 TENSION SPRING (BALL DOOR) 24
47-035240-0 01 PROTECTOR PLATE, 10 PIN SIDE 24, 25
47-035241-001 PROTECTOR PLATE, 7 PIN SIDE 24, 25
47-041526-004 R.H. PUSHER ROD 15
47-041721- 002 GUTTER ADAPTER 2, 14, 15
47-041774-00 4 BRACKET 15
47-041794- 009 SWEEP RELEASE ASSEMBLY - TOWER UP 14
47-042056-003 L.H. PUSHER ROD 15
47-044 802-00 9 SWEEP BOARD W/FELT (BROWN) 1547-044927-00 3 SWEEP BOARD ONLY (GREY) FOR GS-98, GS-X 15
47-044978-004 FOOT CAP 15
47-044979-004 RUBBER BUMPER 15
47-045010- 002 SWEEP WAGON FRAME 14, 15
47-045082- 004 SWEEP BOARD DECAL (GS-98) 15
47-045373- 004 SWEEP BOARD DECAL (GS-X) 15
47-045566-0 09 SWEEP RELEASE ASSEMBLY - TOWER DOWN 14
47-050308-004 DAMPER 11
47-051565-0 02 TOOTHED RACK (FRONT) 9
47-051616-004 GEAR 9
47-051617-0 04 SPACER BUSHING 9
47-051625-004 SHAFT SUPPORT 9
47-051632-004 GEAR 9
47-051633- 004 SPACER BUSHING 9
47-051635-001 GEARED RACK 9
47-051674-00 4 TABLE LATCH 8
47-051682-004 STOP 9
47-051758- 003 DAMPER 9
47-051758- 500 AP - GS OVERSIZE SPOTTING TONG DAMPER 8, 9
47-051758- 600 AP - GS OVERSIZE SPOTTING TONG DAMPER 8, 9
47-051762-0 04 CONNECTING LINK 9
47-052020-004 GEAR 9
PART # DESCRIPTION PAGE PART # DESCRIPTION PAGE
-
8/11/2019 GS Products Catalog 2013
34/40
32 | www.brunswickbowling.com
47-052021-0 04 SPACER BUSHING 9
47-052022-0 04 SPACER RING 9
47-052124-00 4 COUNTER WEIGHT 11
47-053513-0 09 TOOTHED RACK (CENTER) 9
47-053635- 004 MICRO SWITCH - SINGLE, CHERRY 10
47-053812- 004 SWITCH PROTECTOR 9
47-053850- 009 PINHOLDER ASSEMBLY - GS-10 AND GS-92 10
47-054298- 001 PIN DETECTOR PLATE W/PIN 11
47-054689 -009 PIN HOLDER W/ DAMPERS - GS-10, GS-92, GS-96 - GS-98 10
47-054699 -009 PINHOLDER ASSEMBLY - GS-96 - GS-98 10
47-054700- 004 MICRO SWITCH - DOUBLE 10
47-054896-002 R.H.TONG 9
47-054897-0 03 L.H. SPOTTING TONG PIVOT 9
47-054898-003 R.H. SPOTTING TONG PIVOT 9
47-054899-003 GEAR 9
47-054900-003 LH LEVER (1, 4, 5, 6) 9
47-054901-0 03 RH LEVER ( 2, 3, 7, 8, 9, 10) 9
47-054902-0 02 DECK PLATE 9
47-054980-201 PIN HOLDER W/ DAMPERS - GS-X/CPO 10, 11
47-054981-002 PIN GRIPPER 11
47-054982-0 02 GSX SWITCH FINGER 2, 10, 11
47-054983-002 DRIVE 11
47-054984-004 GEAR 11
47-054985- 001 SWITCH ACTUATOR 10, 11
47-054986-004 GRIP RING 11
47-054987-00 4 SOLENOID SPRING 11
47-054988 -003 SWITCH BUTTON 11
47-054989- 001 SETTING TABLE LEVER 8
47-055001-0 04 CLIP (MICRO SWITCH) 11
47-055002-00 2 LINK ASSEMBLY 8
47-055003-0 04 MOUNT PLATE 1147-055004-004 SOLENOID PLUNGER 11
47-055005-0 04 TENSION SPRING 11
47-055006- 004 TORSION SPRING 11
47-055008- 004 TENSION SPRING 11
47-055117-009 SPOTTING TONG (1,4,5,6) 9
47-055118- 009 SPOTTING TONG (2,3 ,7,8,9,10) 9
47-055148-002 L.H. TONG 9
47-055166- 009 SETTING TABLE COMPLETE, GS-10/GS 98 9
47-055177-00 1 SETTING TABLE ASSEMBLY, GSX 9
47-055314-0 09 PINHOLDER ASSEMBLY - GS-X/CPO 10, 11
47-055323-0 04 MICRO SWITCH - GSX 10, 11
47-055328-0 03 CONNECTOR CLIP 11
47-055785-0 04 MOUNT PLATE - STEEL 11
47-070386 -004 COUNTER WEIGHT 17
47-071449 -609 GS METAL PINION GEAR 16
47-071591-004 SPROCKET SHAFT 17
47-071602-004 COMPRESSION SPRING 13
47-071615-004 SQUARE SHAFT GEAR 9
47-071702- 003 GEAR ASSEMBLY WITH HUB 16
47-071705-004 PINION SHAFT 16
47-071876 -001 FRAME (ADJUSTABLE B-SWITCH) 17
47-071879-003 CAM 17
47-072307-00 4 REED SWITCH (RED BOX) 17
47-073534 -004 A SWITCH (RED BOX) 17
47-075188-001 FRAME (FIXED B-SWITCH) 17
47-075352-00 4 PIVOT BEARING 17
47-075356- 003 CRANK 17
47-075357-003 CRANK ARM 17
47-075473- 003 SWITCH SUPPORT 17
47-075474-009 AP - CHAIN GEAR 2, 16, 17
47-075476-0 04 SHAFT 17
47-075482-002 GUIDE BEAM 17
47-075486-004 CHAIN 17
47-075488-004 5/8 CHAIN 17
47-085348-003 BEARING HOUSING 17
47-085349-003 TUBE GUIDE 10, 17
47-085430-003 L.H. GUIDE SUPPORT BRACKET 17
47-085436-003 R.H. GUIDE SUPPORT BRACKET 17
47-085449-003 SUPPORT ROD 17
47-090547-00 4 SPUR GEAR WITH 25MM COLLAR 18, 19
47-090969 -003 PIN STOP 19
47-090989-002 DOUBLE PULLEY 19
47-091277- 002 SLIDER ASSEMBLY - MOUNT ONLY 18, 19
47-091284 -002 SLIDER ASSEMBLY - COMPLETE 18, 19
47-091890-002 PIN SHIELD (2, 3, 8, 9, 10) 19
47-092206-004 SHAFT 19
47-092211- 002 PIN SHIELD (1, 6) 19
47-092300 -004 POLYCORD 12MM 19, 20, 21
47-092300 -005 POLYCORD 13MM 19, 20
47-092415-003 PULLEY WITH BEARING 19
47-092527-000 OVERFLOW CHUTE PIN WIPE FOR METAL CHUTE 22
47-092529- 600 SOCK - HEAVY DUTY (WHITE) 23
47-093547-00 4 GEAR 1947-093587-0 04 DOWEL PIN 3MM X 15MM 19
47-093749-004 BRACKET 23
47-093760- 002 PIN SHIELD (7) 19
47-09386 3-003 ROUND BELT PULLEY 19
47-093874-00 4 CLAMP 19
47-093876- 004 BELT CUTTER 29
47-09387 7-004 BELT WELD KIT - 220 VOLT 29
47-093900-003 SPUR GEAR 18
47-093906-001 R.H. PIN GUIDE WEDGE 21
47-093925- 004 SPACER 21
47-093929-001 L.H. PIN GUIDE WEDGE 21
47-094206- 004 BELT WELD KIT - 110 VOLT 29
47-094208 -004 BELT WELDING IRON ONLY - 220 VOLT 29
47-094211- 004 IRON ONLY 110 VOLT 29
47-094346 -003 BEARING SHELL WITH SHOULDER 19
47-094347-003 BEARING SHELL 19
47-094349- 001 FRONT SHAFT ASSEMBLY 19
47-094351- 003 WASHER 19
47-094353-0 04 PVC SPACER 19
47-094712-003 BRACKET 19
47-094778-001 UNIVERSAL HOUSING 18
47-094782- 003 UNIVERSAL RELEASE LEVER - BUTTON ONLY 18
PART # DESCRIPTION PAGE PART # DESCRIPTION PAGE
-
8/11/2019 GS Products Catalog 2013
35/40
www.brunswickbowling.com | 33
47-094790 -009 SQUARE SPINDLE 18
47-094792-0 09 UNIVERSAL PIN STATION 3, 18
47-094793- 009 UNIVERSAL PIN STATION 3, 18
47-094794 -009 UNIVERSAL PIN STATION 3, 18
47-095050-003 PLASTIC BEARING 19
47-095103- 001 SMART SHARK GUIDE - LH 20, 21
47-095104 -001 SMART SHARK GUIDE - RH 20, 21
47-095105-003 SLIDE 21
47-095106-001 GSX SHARK FIN 20, 21
47-095107-003 HOUSING 21
47-095108 -001 SHARK SWITCH ASSEMBLY 21
47-095109 -004 SPACER - LONG 21
47-095111-004 SOLENOID PLUNGER 21
47-095112- 004 SPACER - SHORT 21
47-095154-009 UNIVERSAL RELEASE LEVER - COMPLETE 18
47-095609 -002 SLIDER ASSEMBLY - SLIDER ONLY 18, 19
47-095726- 004 MOUNTING PLATE 23
47-095727-0 04 PRESSURE PLATE 23
47-095728-004 ANGLE BRACKET 23
47-095729-004 MOUNTING BRACKET 23
47-095737-001 R.H. OVERFLOW CHUTES 22, 23
47-095738-001 L.H. OVERFLOW CHUTE 22, 23
47-095739 -009 OVERFLOW CHUTE ASSEMBLY WITHOUT SOCK - LH 22 , 23
47-095740-00 9 OVERFLOW CHUTE ASSEMBLY WITHOUT SOCK - RH 22 , 23
47-095744-0 04 ROUND BELT GEARED PULLEY 20, 21
47-096295 -004 OEM REPLACEMENT TIP FOR 110 AND 220 VOLT 29
47-142594-000 SWITCH GUARD 27
47-142657-000 LH HARNESS DECK POWER MOTOR ASSMBLY 27
47-142657-010 RH HARNESS DECK POWER MOTOR ASSMBLY 27
47-142659-000 HARNESS TRANSFORME R ASSEMBLY 26, 27
47-142660-0 00 BLACK POWER SWITCH/CABLE 2747-142661-00 0 LH HARNESS SWEEP MOTOR POWER ASSEMBLY 27
47-142661-01 0 RH HARNESS SWEEP MOTOR POWER ASSEMBLY 27
47-142663-00 0 AC POWER IN CABLE ASSEMBLY 27
47-142664-000 LH PIN LIGHT POWER CABLE 27
47-142664-010 RH PIN LIGHT POWER CABLE 27
47-142692-000 TRANSFORME R/HAR NESS - DOUBLE 26, 27
47-142693-000 TRANSFORME R TO CPU CABLE 27
47-142700-00 0 CPU TO HIGH VOLTAGE LOGIC CABLE ASSEMBLY 14 27
47-142712-00 0 EMERGENCY STOP CONTACTOR 26
47-142736-4 02 CPU PCB NEX GEN CONTROLLER 27
47-223170-00 0 12 VOLT BULB 4, 5
47-226294-0 04 BALLAST FOR 230 VOLT PINLIGHT 29
47-243027-004 SWITCH - COMPLETE 9
47-243028-0 04 OOR SWITCH TOWER DOWN 17
47-243029- 004 MAGNETIC B, C, D SWITCH 17
47-245164- 001 SETTING TABLE HARNESS 9
47-245420-00 4 SETTING TABLE CABLE ASSEMBLY (NEX GEN) 2, 8
47-273865-0 09 METRIC TOOL KIT 28
47-274332-002 BEARING BLOCK REPAIR KIT 7
47-274669- 004 TWO-PI ECE SPUR GEAR - REAR 18
47-27488 8-009 BALL DOOR FLAP KIT 12, 13
47-275620-009 SETTING TABLE REPAIR KIT 8, 9
47-275730-00 9 DISTRIBUTOR REPAIR KIT 19
47-275731-009 AP - OVERFLOW CHUTE UPGRADE KIT 22
47-275746-009 T WO PIECE SPUR GEAR - FRONT 18, 19
47-275748-009 2-PIECE PULLEY REPAIR KIT 19
47-275804-0 09 POLYCORD 12MM 20
47-275812-009 AP - OVERFLOW SOCK PIN CLEANER KIT 22
47-275850-009 SETTING TABLE REPAIR KIT 8
47-276153-009 SIDE FRAME REPAIR KIT 6, 7
47-86000 1-000 BELT WELDING INSTALLATION TOOL 29
47-860002-000 METRIC HARDWARE KIT 28
47-860003-000 AP - PIN WIPE 22, 23
47-860005 -000 PIVOT PIN - PKG OF 10 11
47-86000 9-00 0 POLYCORD ROUND BELT TRIM TOOL 28
47-860009-001 REPLACEMENT BLADES - PKG OF 2 28
47-86001 1-000 GSX TABLE SAFETY SUPPORT 10
47-860012 -000 GSX PIN CLEANER KIT MOP COVERS 3, 22
47-860013 -000 O-RING - PKG OF 4 7
47-860015 -000 MICRO SWITCH - SERIES 478 AND BELOW 10
47-861001-001 R.O. HEX HEAD CAP SCREW 5MM X 25MM 23
47-86100 8-00 1 TRUSS HEAD SCREW 6MM X 16MM 9
47-861010 -001 FLAT WASHER 13MM - PKG OF 20 13, 15, 17
47-86101 1-001 FLAT WASHER 17MM - PKG OF 10 7, 15
47-861018 -001 SLOTED PAN HEAD SCREW 8MM X 60MM 7
47-861028 -001 SHIM WASHER 25MM X 36MM X 1MM 19
47-861029 -001 FLAT WASHER 16MM - PKG OF 10 15
47-861031 -001 FLAT WASHER 18MM - PKG OF 10 17
47-86104 0-001 WASHER 6.1MM - PKG OF 10 11
47-861043- 000 PLASTIC RETAINING BOW BUSHING 18
47-861044-000 RETAINING RING 18
47-861045-000 STEEL SHAFT 18
47-86104 6-00 0 AP - CONSOLIDATED REAR DISPLAY PACKAGE 4,
5,
2647-861047-0 00 AP - STATUS LIGHT BULB - 24 VOLT LED 2, 5
47-86104 8-40 1 AP - NEX GEN REAR DISPLAY PACKAGE 3, 4, 5, 26
47-861049 -009 O-RING - PKG OF 5 12, 14, 16
47-862100 -000 LCD NEX GEN PACKAGE 26
47-86210 8-000 CUSHION ADJUSTMENT HARDWARE KIT 12, 13
47-862507-0 00 PIN FEED EXTENDER KIT 2, 4, 5
47-862508-000 DRILL FIXTURE 4, 5
47-862770-000 BELT WELDING CLAMP 29
47-862787-0 00 PROTECTIVE COVER 24
47-862804-000 GS ELECTRICAL TOOL KIT 29
47-862854 -000 3.15 AMP FUSE 26, 27
47-862855-000 8 AMP - CERAMIC FUSE 26, 27
47-862856 -000 .5 AMP - SLOW BLOW FUSE 26, 27
47-862857-000 KEYBOARD MEMBRANE 27
47-862859- 000 HIGH VOLTAGE PCB NEX GEN CONTROLLER 27
47-862863 -000 I/O PCB ASSEMBLY 27
47-86286 6-402 NEX GEN CONTROLLER ASSEMBLY 27
47-86286 7-000 EMERGENCY STOP UPGRADE KIT 26
47-86287 7-402 NEX GEN FIRMWARE (4.95.2 6) 3, 4, 26
47-862931- 000 RETAINING BOW EXTENDER SLEEVE 18
47-862932- 000 ACCELERATOR NON-SLIP PLATE 24, 25
47-900011-000 SPUD WRENCH 28
PART # DESCRIPTION PAGE PART # DESCRIPTION PAGE
-
8/11/2019 GS Products Catalog 2013
36/40
34 | www.brunswickbowling.com
47-900012- 000 GAUGE BLOCK 28
47-902401-0 00 GS PREVENTATIVE MAINTENANCE WALL CHART 29
57-900102-000 MOLEX ROUND EXTRACTOR 29
57-900103-000 MOLEX CRIMPER 29
57-900108-000 MILLER CUTTER/STRIPPER 29
99-010103-004 PLASTIC BEARING 15
99-010108-004 BEARING 13
99-0 10123- 004 ACCELERATOR MOTOR MOUNT BUSHING 24
99-02 6121- 000 BALL CUSHION HYDRAULIC SHOCK ASSEMBLY 12, 13
99-03 0363- 004 ACCELERATOR MOTOR-208/230/ 380 24
99-040113-002 DISTRIBUTOR MOTOR 16
99-040116-002 TABLE MOTOR 16
99-040241-004 SWEEP MOTOR 16
99-0 40249-00 4 PLASTIC ROLLER ASSEMBLY 14, 15
99-040293-004 SWEEP MOTOR 16
99-040294-004 TABLE MOTOR 16
99-0 40295- 004 ACCELERATOR MOTOR 16, 24
99-046122-000 SWEEP SHOCK ABSORBER 14
99-060219-004 SOLENOID ASSEMBLY 25
99-060242-004 PINHOLDER SOLENOID 10
99-060351-004 PINHOLDER SOLENOID 10, 11
99-0 60387-0 04 SOLENOID CONSOLIDATED/NEX GEN 20, 21
99-070356-004 BALL DOOR SOLENOID 24
99-076120-000 STROKE LIMITER SHOCK ABSORBER 16
99-076123-000 STROKE LIMITER SHOCK ABSORBER 16
99-090348-004 SPRING 21
99-090349-004 O-RING FOR PLUNGER 11
PART # DESCRIPTION PAGE PART # DESCRIPTION PAGE
-
8/11/2019 GS Products Catalog 2013
37/40
www.brunswickbowling.com | 35
PART # DESCRIPTION PAGE PART # DESCRIPTION PAGE
-
8/11/2019 GS Products Catalog 2013
38/40
36 | www.brunswickbowling.com
S A F E T Y P R O C E D U R E S
Pinseer Safety Regulations
The head mechanic must teach all personnel who will workon the pinseer enough about the machine to preventaccidents through ignorance.
Always open the pinseer circuit breaker or disconnectthe pinseer power plug from the electrical box beforeworking on the machine.
When the pinseer shuts itself o electrically, be sureto open the circuit breaker and disconnect the pinseerpower plug from the electrical box before looking for, andclearing, the cause of the jam.
Always reach over or around the machine assemblies,never through or between the shas, arms and levers.
Use the appropriate rods to securely lock the rakecompression spring guide tube before maintaining therake or deck.
The desk person must never turn on a machine from themanagers control desk without rst making sure that noone is working on the machine.
Position the rake in its down position when working on thefront of the machine to prevent being hit by a bowling ball.
When more than one person is working on the machines,never turn on a machine without checking to see ifeveryone is clear of the machine.
Under no circumstances allow an unqualied person towork on the pinseer.
Safety Tips & General Safety RegulationsFollowing basic safety procedures can help avoid
injury. As with all machinery, there is an element ofrisk working on the pinseer if the rules of safetyare disregarded. Common sense, a knowledgeof pinseers and a knowledge of basic safetyprocedures will prevent injury to personnel workingon the machines.
Wear the proper clothing whenworking on the pinseer. Dont wearneckties or loose clothing that mayget caught in the machine. Wearpants without cus to prevent
tripping. Wear shoes with safety,non-slip soles.
Use the right tool for each job toprevent injury to yourself and to themachine. Remove all tools from thepinseer before turning it on.
Avoid the use of cleaners that aretoxic.
To prevent slipping, immediatelywipe up any oil or liquids that havespilled.
Store oily rags and any othercombustibles in a reproofcontainer.
When the safety guards areremoved from the pinseer, beextra cautious while the pinseeris turned on. Replace the guardsimmediately when the work iscomplete.
Partial schematics are listed in each section.For full pinseer and bowling schematics,visit our website at www.brunswickbowling.com/service-support/tech-support
-
8/11/2019 GS Products Catalog 2013
39/40
www.brunswickbowling.com | 37
SUPPORTING YOUR NEEDS
Since 1968, Brunswick Electronic Repair hassupported Brunswick scoring equipment.Currently, we support repairs on productsfrom 1985through today including:
AS 80/90, ASK
FRAMEWORX
CLASSIC
VECTOR
We also repair electronic productsrelated to Electronic Triggering, Telefouls,Pinball Wizard, GS Pinseers, Envoy andAuthority22lane machines.
GETTING YOU UP AND RUNNING FAST!
We understand that electronic repairscan mean costly down time, which is whywe oer three convenient methods ofexchange and repair:
PRESHIP EXCHANGE
You can request rebuilt assembly fromour stock be pre-shipped to your center.Geing you from down and out to up andrunning fast!
ASSEMBLY EXCHANGE
You send in a repairable assembly, inexchange we send you a previously rebuiltunit back.
ASSEMBLY REPAIR
You send in an assembly for repair, werepair that unit and send it back in operatingcondition.
OUR WORK IS GUARANTEED
Our goal is to ship you a high-quality, readyto use assembly. We back it up with a90-day warranty on our rebuilt assemblymaterials and workmanship. We trust youwont need it.
GET STARTED
To place an order or receive additional information contact us at:
In North America Brunswick Electronic Repair
Brunswick Bowling & Billiards525West Laketon Ave.
Muskegon, MI 49441
Toll Free 24hrs: 8009372695
Direct Dial: 2317253370
Fax: 2317254778
Email: [email protected]
Website: hp://www.brunswickbowling.com
In Canada French/English spoken
Striker Bowling Solutions9 505 Iroquois Shore Road
Oakville, ON Canada L6H 2R3
Tool Free: 8002322369 ext. 5
Fax: 8667892695
Outside of North America: contact your localauthorized Brunswick Distributor
-
8/11/2019 GS Products Catalog 2013
40/40
Go to www.brunswickbowling.com/contact/sale-rep/ to find a local Brunswick Sales Representative
Velcro is a registered trademark of Velcro Industries. Nylatron is a registered trademark of Quadrant. Molex is a registered t rademark of Molex Incorporated.Kevlar, Teflon, Delrin, and Zytel are registered trademark s of E.I. du Pont de Nemours and Company. Dyalon is a registered trademark of Thombert Incorporated.Allen-Bradley is a registered trademark of Rockwell Automation, Inc. Federal Pacific is a registered trademark of American Circuit Breaker Corporation. USBCis a registere d trademar k of United States Bowli ng Congress Inc Windows is a registered trademark of Microsoft Corporation in the United States and/or other
NORTH AMERICA
525 West Laketon Avenue
Muskegon, MI 49441-2601 USA
1800YesBowl (Options 1,1,*)12317254966 (Options 1,1,*)
www.brunswickbowling.com
EUROPE
Brunswick GmbH
Ginnheimer Strasse 6
D-65760 Eschborn Germany+496196472713
ASIA PACIFIC
Brunswick Bowling
29 Loyang Drive
Republic of Singapore, 508944+6598515582
LATIN AMERICA
525 West Laketon Avenue
Muskegon, MI 49441-2601 USA
12317253466