gs engineering s.r.l. engineering s.r.l. foratrice manuale a una testa single-head manual drilling...
TRANSCRIPT
MOTORE ELETTRICO-
ELECTRIC MOTOR
LEVA PER FORATURA VERTICALELEVER FOR VERTICAL DRILLING
FRESA-
DRILLING BIT
LATERAL VIEW
MANOVELLA PER FRESATURA SOTTOSQUADRO-
ROTATING CRANK FOR UNDRCUT DRILLING
14
121
104
75
30/9
0
40
VISTA LATERALE-
LATERAL VIEW
GRUPPO ELETTROVALVOLE-
ELECTROHYDRAULIC VALVE GROUP
VISTA FRONTALE-FRONT VIEWSEZIONE VERTICALE-VERTICAL SECTION
GRUPPO FORANTE-
DRILLING HEAD
MOTORE MANDRINO-
ELECTRIC MOTOR
CENTRALINA OLEODINAMICA-
HYDRAULIC CENTRAL PUMP UNIT
SOFFIETTI DI PROTEZIONE GUIDA-
RAILS PROTECTIONS
274
214
160
70 -
BE
NC
H H
EIG
TH
110
Foratrice manuale a testa singola per fori "GSD"Single-head manual drilling machine for "GSD" holes
Foratrice automatica a due teste per fori "GSD"Twin-head automatic drilling machine for "GSD" holesForatrice automatica a due teste a lavoro in cantiereTwin-head automatic drilling machine working at site
Egyptian Embassy – Berlin (Germany)Teatro Alla Scala – Milano (Italy)
BANK OF CHINA Heahquarter buildingBeijing - China
UCSF BIULDING 24A/BSan Francisco - CA (USA)
UCLA WESTWOOD REPLACEMENT HOSPITALLos Angeles - CA (USA)
Egyptian Embassy – Berlin (Germany)
Ar
tw
or
k -
Ma
rc
o D
azzi
- 3
92
0
2 0
4 0
92
internet: www.gsengineeringsrl.it
v.le XX Settembre, 177/B54031 Avenza-Carrara (MS) - ITALYtel. (39) 0585 856667 - Fax (39) 0585 856669e-mail: [email protected]
GS engineering s.r.l.
Foratrice manuale a una testaSingle-head manual drilling machine
GSD is a special anchoring system for stone cladding.It allows an hidden fixing on the back of the stone slabs with very high safetyfactors against pull-out failure. The main features of the GSD fixings are:
NO INTERNAL STRESSES IN THE BASE MATERIAL (STRESS-LESS ANCHOR), THEREFORE IT ALLOWS HIGH SAFETYFACTORS OF THE FIXINGS
VERY EASY AND FAST INSTALLATION WITH PNEUMATIC TOOL
IT CAN BE DIRECTLY INSTALLED IN THE WORKSHOP BECAUSE THERE ARE NO PROJECTING PARTS FROM THE SLAB SURFACE,THEREFORE THERE ARE NO PROBLEMS FOR PACKING AND SHIPPING
RECOMMENDED FOR SAFE FIXINGS UNDER HEAVY LOADS, SPECIALLY FOR THIN MATERIAL THICKNESS
FAST AND EFFECTIVE FOR ASSEMBLING WITHOUT USE OF ADHESIVES
1 - Stainless Steel AISI 304 (A2)Material
Ecole Budé– Petit Lancy, Geneve (Switzerland)
Cubix – Alexanderplatz, Berlin (Germany)
RAIL RESTRAINTBRACKET
THERMALINSULATION
RESTRAINTANCHOR
SUPPORTANCHOR
IMPALA BLACKGRANITE
GSD M8x12
GSD M8x12
RAIL SUPPORTBRACKET
VERTICALRAIL
EXPANSION BOLT170
ANTISLIDINGBOLT
SUPPORTANCHOR
GSD M8x15
GSD M8x15
RESTRAINTANCHOR
RESTRAINTANCHOR
VERTICALRAIL
CAPAO BONITOGRANITE
RAIL SUPPORTBRACKET
THERMALINSULATION
Egyptian Embassy – Berlin (Germany)
Bodio Center – Milano (Italy)
Banca Unione di Credito – Lugano (Switzerland)
FIXING BRACKET
GRANITE
RESTRAINTANCHOR
SUPPORTANCHOR
THERMALINSULATION
GSD M8x15
EXPANSION BOLT
GSD M8x15
110
GRANITEJAMB
FIXINGBRACKET
ASSEMBLYBRACKET
GSD M8x15 GRANITE
WINDOWFRAME
GSD M8x15
GSD M8x15
EXPANSION BOLT
THERMALINSULATION
GSD Stone anchor GSD Stone anchor GSD Stone anchor
1. Drilling 2. Setting 3.Locking 4.Locked anchorUse special shapeddiamond tool type GSD.See drilling instructions.
Drive the GSDanchor to thefull hole depth
VERY EASY AND FASTINSTALLATION WITHPNEUMATIC TOOLSee locking instructions.
The anchor deformationprovides a stress-lessfixing in the base material.
Installation technique
P
V
t s
Dd
hth
GSD Bracket -Stress Analysis
GSD Anchor - Stress Analysis
Ecole Budé– Petit Lancy, Geneve (Switzerland)
GSD anchor - Dimensions
M8x21
30Grey Quartzite
GSD M6x6
M8x10
M6x20 30 10.1
14.0
M8x10
11.8
7.4
7.5
100
For hole dimensions and tolerances see Drilling Data Sheet
M8x10 20 6.6
12 N. A.
5.0
5.3
8.4
Gres Porcellanato ceramic tile
Cottostone agglomerate N. A.R
(1) Average strength according to ASTM C1354. Values are only indicative.
4.2
16.0
4.5
4.5
4.8
4.040
309.75.3 13.2M8x15
M8x10 7.119
M8x10 5.2
M8x21
8.1
Botticino limestone M8x21 N. A.
Moca Cream limestoneM8x15M8x21 40 N. A.
N. A.
M8x15 N. A.11.5
M6x6 1.5
Roman Travertine
Tyndall limestone
Impala Black granite12.7
N. A.Lasa White marble M8x15 30
17.440
20
N. A.New Imperial Red granite 20
M8x15
N. A.
1 - Stainless Steel AISI 304 (A2)2 - Stainless Steel AISI 316 (A4)
Texas Pink granite M8x15 30
N. A.40
N. A.Pietra di Vicenza limestone 50
N. A.Bianco Sardo granite 20
M8x15 30
N. A.
GSD M8x21
Capao Bonito granite 35M8x15
N. A.Tarn Grey granite M8x15 30
White Carrara marble N. A.M8x15 30N. A.20 3.3
Basaltina
GSD M6x20
Material
30
13 251814 15M8GSD M8x15
13 30
59M6 1212
1814 20M8
8
1016
151814M8GSD M8x10 1814
5M6 12 1016 23
25
min.materialthicknessmm
ht smin.threadeddepthmm
boltthread
MholediameterØmm
groovediameterØmm
drillingdepth
mm
max.fixingthicknessmm
h tDd
Type
Type
(1)
shearstrengthV (kN)
pull-outstrengthP (kN)
GSDtype
stonethicknessmm
GSD anchor - strength