gruppo aturia product overview - tapflo.rs · the ehedg certification of our aseptic diaphragm pump...

Gruppo Aturia product overview

2

Tapflo SerbiaTapflo Group is one of the leading manufacturers of industrial pumps in Europe. With more than 30 years of working experience with different types of pumps, we can be your reliable partner regarding the choosing, installation and main-tenance of the industrial equipment. Tapflo d.o.o. Novi Sad is a subsidiary company, branch office opened in Serbia, who is in charged for selling and distribution of pumps and accessorize for the EX-YU countries. We offer high quality products, operational reliability, low cost maintenance and 24h technical consulting. Our premises are located near the city center, so you can visit us any time in case you need additional information and support which pump is the perfect choice for your specific application and industry.

Tapflo qualityThe Tapflo pump is usually an essential part in the process with hazardous fluids. We always strive to supply the safest

and most environmental friendly solution for these fluids. As a part of our safety thinking, we are in the frontline following important standards, guidelines and directives. Many of our products comply with the EC ATEX directive for equipment in explosion hazardous environments. All our pumps are of course CE marked and followed by our comprehensive instruction manuals. Tapflo is an ISO 9001:2001 certified company. The EHEDG certification of our aseptic diaphragm pump was achieved in 2009

The history of TapfloTapflo was founded in Kungälv (north of Gothenburg), Sweden 1985 and has since then been working with design and manufacture of air operated diaphragm pumps. The product range has grown from a few plastic models, to complete PE & PTFE, metal and sanitary series and lately also with complete ranges of centrifugal pumps. Tapflo has now esta-blished sales offices in 20 countries and independent distributors in another 30 countries - spare parts and pumps are available worldwide.

Since 2012 Tapflo is the official and exclusive partner of Gruppo Aturia.

Aturia began to operate in the Centrifugal Pumps sector in 1927 and became a leader in the Submersible Electric Pumps field by patenting the Submersible Motor in 1946. In 1960 it extended its markets to countries in the Mediterranean, America and Asia. Over time Aturia acquired four top Italian companies: Rotos (1990), Marelli (1990), Audoli & Bertola (2003) and Aris Chiappa (2009).

Rotos was set up in 1919 and manufactured electrical motors, monobloc pumps, multistage pumps and vertical pumps. In 1962 it entered French group GUINARD and became a development centre for multistage pumps. Based on this experience, it started to produce pumps for the process industry (ISO 2858 and API 610). In 2005 it started to produce magnetic drive pumps in its plant based in glio di Po.

Founded in 1891, it began to manufacture electrical motors and centrifugal pumps in 1898. The company was acquired by Aturia together with Rotos in 1990. Thanks to this acquisition, Gruppo Aturia extended its range of products considerably by including GIEM and ITEM’s pumps (monobloc pumps, split case pumps and large-capacity pumps).

The company started producing vertical pumps in 1890 and over the years it strengthened its presence on the market in terms of applications for the heavy industry (steel plants, cooling systems, power plants and the marine sector). Gruppo Aturia acquired Audoli & Bertola in 2003, thus improving its presence in the industrial sector. Its office in Turin is currently a centre of excellence for fire-fighting systems (NFPA20, FM).

G. Chiappa Fonderie was established in Turin in 1921 as a steel plant and started to manufacture bronze, aluminium and cast iron casts. In 1940 it began to produce vertical pumps.For over forty years, in partnership with the world’s top gas turbine manufacturers, it has been developing pumps specifically designed for lubrication services.

3

Index

About Tapflo and Gruppo Aturia .........................................................................................2

Certified Quality System/Quality Control ...........................................................................4

A flexible and integrated cycle: from engineering to final testing........................................4

Where do you use Gruppo Aturia pumps?..........................................................................5

Submersible pumps.......................................................................................................................6

• Submersible pumpsets..........................................................................................................................7

• Submersible rewindable motors..........................................................................................................7

Surface applications......................................................................................................................8

• Monobloc centrifugal pumpsets DIN 24255 - EN 733..................................................................9

• Monobloc centrifugal pumpsets ”IN LINE”.......................................................................................9

• Horizontal centrifugal single stage pumps DIN 24255 - EN 733..............................................10

• Centrifugal multistage radial pumps.................................................................................................10

• Horizontal centrifugal split case pumps, double suction.................................................................11

• Vertical turbine pumps........................................................................................................................11

Process applications....................................................................................................................12

• Process pumps API 610.....................................................................................................................13

• Multistage vertical pumps in barrel..................................................................................................15

• Single stage centrifugal pumps for aggressive liquids ISO 2858, ISO 5199.............................16

• Vertical single stage pumps ISO 2858............................................................................................16

• Metallic magnetic drive sealless centrifugal and turbine pumps...................................................17

• ELV/PEN propeller pumps ............................................................................19

Fire fighting..................................................................................................................................20

• Horizontal split case type centrifugal fire pumps............................................................................22

• Vertical shaft, turbine type centrifugal fire pumps...........................................................................23

4

Certified Quality System/Quality ControlGruppo Aturia’s commitment to improve Quality has been acknowledged by the Lloyd’s Register Group with the “Quality System” certification.

The pumps’ performance is checked in the Testing Room.

The wide range of NC machines allows operators to easily achieve the precision requested to process the components.

The IT management system and the collection of processing data also allows to trace products at every stage of the process.

A flexible and integrated cycle: from engineering to final testingThe product cycle begins in the ”Engineering Department”, where its technicians collect all inputs directly from the other managers. Starting from a large data base including more than one thousand hydraulics, Aturia can find always the best solution. Thanks to its long experience, Gruppo Aturia can today design pumps for special fluids with power up to 1000 kW, pressure up to 150 bar, low NPSH, with and without seal and temperature up to 500°C.To meet market needs, which require deliveries in shorter and shorter times, Gruppo Aturia invests in a large stock of components. The quick assembly of components assures a prompt delivery of the pump. Furthermore the large availability of stocked components guarantees a timely supply of any spare part required.At the end of the production cycle, the pump can be pain-ted according to Company standards or to Customer’s specifications.The packing, always carefully made, will efficiently protect the product and guarantee its perfect conditions at delivery.

5

Where do you use Gruppo Aturia pumps?Gruppo Aturia pumps are some of the most versatile pumps on the market today. They can be used in a variety of installations in numerous applications.

Various liquidsGruppo Aturia pumps are compatible with a very wide range of liquids: Water, sea and river water Corrosive and chemical aggressive High and low viscous Abrasive Flammable, toxic

Below you will find some of the most common applications:

Water systems

Civil and industrial plants

Naval

Energy

Mining

Oil and Gas

O�-shoreinfrastructures

O�-shoreinfrastructures

IndustryChemical and petrochemical plants

O�-shoreinfrastructuresOn-shore infrastructures

HeatingAir-conditioning

Petrochemicalindustries

Industrial plants

Re�neries

Civil plants

6

Submersible

The installation of submersible electric pumps, for more than 60 years, has allowed Gruppo Aturia to acquire countless applied experiences in practically all fields in which these pumps are required. Submersible pumps, simply born to lift well water, have first replaced deep well vertical pumps. Through the use of different materials such as bronze, cast stainless steel and Duplex they are now successfully used in heavy applications where a high reliability is required, such as Mine, Off-Shore, Industry, Navy. The installation of submersible pumps in suitable vertical or horizontal cylindrical tanks allows silent- operating pressure lifting systems in a more reduced space compared to the traditional solutions with surface pumps.In order to offer customers hydraulic characteristics with best efficiency, the wide range of capacities and heads is covered by over five hundred types of submersible pumpsets. In the last years, adopting a new design, Aturia has introduced a range of motors suitable for hot waters.

SUBMERSIBLE PUMPS

7

Submersible

submersible pumpsets

Size 6”-14” 14”-25”

Poles 2 4

Capacity [m3/h] 7 - 800 up to 1800

Head [m] 10 - 700 up to 160

Power [kW] up to 400 up to 300

Voltage [V] 200 - 1000

Frequency [Hz] 50 - 60

submersible rewindAble

motors

Size 6”-8”-10”-12”-14” 8”-16”

Poles 2 4

Power [kW] 4 - 400 12 - 400

Voltage [V] 220 - 1000


Special ConstructionWater temperature up to 70 0СPower up to 1000 kWVoltage up to 10 000 V

CAst iron pumpsets

bronZe, stAinless steel / dupleX pumpsets

8

Surface

SURFACE APPLICATIONSGruppo Aturia offers a wide range of surface pumps answering to the needs of manifold and important productive fields. Monobloc pumps are used in building such as water distribution systems, heating, air conditioning. Single stage and split case pumps are used in pumping stations, Fire-Fighting service and industry for clean water when large flows and limited heads are required. Multistage pumps are used in pumping stations, as well as for artificial snowing, for reverse osmosis and for more sophisticated duties such as boiler feed. Vertical pumps are used in recirculation systems for industrial water, in power plants,in steel mills, in drainage systems and in fish farming installations.

9

Surface

monobloC CentrifuGAl pumpsets din 24255 - en 733

monobloC CentrifuGAl pumpsets ”in line”

Construction Casing Cast Iron

Impeller Cast Iron/Bronze/St.Steel

Shaft Chromium Steel

Seal Mechanical

Electric Motor IP55 - Class F



Shaft Chromium Steel

Seal Mechanical

Electric Motor IP55 - Class F

Size [DN] 32-150

Poles 2 4

Capacity [m3/h] 1,5 - 210 1,5 - 300

Head [m] 4 - 68 2 - 22

Nom.Pressure [bar] 10/16


Impeller Diam. [mm] up to 250

Voltage [V] 220-240/380-415


Temperature [0С] -10/+130

Size [DN] 25-100 25-200

Poles 2 4

Capacity [m3/h] 2 - 300 1 - 600

Head [m] 6 - 92 2 - 22




Voltage [V] 220-240/380-415



10

Surface

horiZontAl CentrifuGAl sinGle stAGe pumps din 24255 - en 733

CentrifuGAl multistAGe rAdiAl pumps



Shaft Steel

Seal Mechanical

Construction

CasingCast Iron/ Nodular Cast Iron/Carbon Steel/St.Steel/Duplex

Diffuser/Impeller

Cast Iron/Bronze/St.Steel/ Duplex

Shaft Steel/St.Steel

Seal Mechanical/Packing

Size [DN] 25-125 25-250

Poles 2 4

Capacity [m3/h] 3 - 400 3 - 840

Head [m] up to 390 up to 250


Impeller Diam. [mm] up to 320 up to 415

Special ConstructionPressure [bar] up to 100 up to 60Water temperature up to 180 0С

Available with ATEX CertificationAvailable with ATEX Certification

Size [DN] 32 -200 32 - 250

Poles 2 4

Capacity [m3/h] 6 - 330 3 - 1380

Head [m] 9 - 92 2 - 90






11

Surface

Size [DN] 100 - 2000

Capacity [m3/h] 10 - 25000

Head [m] 3 - 600


Power [kW] up to 1000


Temperature [0С] +60

horiZontAl CentrifuGAl split CAse pumps, double suCtion

VertiCAl turbine pumps

Construction

CasingCast Iron/ Nodular Cast Iron/Car-bon Steel/St.Steel/Duplex

Impeller Cast Iron/Bronze/St.Steel/ Duplex

Shaft Steel


Size [DN] 150 - 600

Capacity [m3/h] 200 - 4000

Head [m] 10 - 200


Power [kW] up to 900



Available with ATEX Certification

Construction

CasingCast Iron/ Nodular Cast Iron/Car-bon Steel/St.Steel/Duplex

Impeller Cast Iron/Bronze/St.Steel/ Duplex



2 poles 4 poles

m3/h

6-8 poles

12

Process

PROCESS APPLICATIONSROTOS, thanks to the long experience gained working in the “Guinard Group”, operates in fields characterized by extre-mely heavy duties, requiring high-tech pumps according to international standards foreseen for such applications. Pumps manufactured in compliance with API 610, ISO 2858 and ISO 5199 standards find their natural application in the most important chemical and petrochemical installation as well as in oil refineries. Magnetic Drive pumps, manufactured in compliance with API 685 and ISO 2858 standards where the utmost reliability and safety is required when pumping dangerous chemical (inflammable, toxic) products. “Barrel pump” versions are studied for an efficient pumping of liqui-fied gases and volatile liquids. Other special fields such as geothermy, reverse osmosis, off-shore, cryogenic fluids and so on, will find in the ROTOS range the suitable pump to satisfy any particular application need.

13

Process

These “heavy duty” type centrifugal pumps are designed for high efficiency industrial services under extreme temperature ranging from -100°C up to +500°C. These pumps provide the answer to a wide variety of pumping problems from the most difficult liquefied gases at low temperatures, to the similarly difficult con-ditions of service of the petroleum industry where liquids have to be pumped at temperatures well in excess of their ignition point.Between these two extreme cases, there is an important range of liquid where the pumping temperature is close to the boiling point causing dangerous hydraulic reactions at the impeller eye, the effects of which could not be withstood by a standard pump. These pumps are the result of long practical experience gained in actual operation on these conditions over many years in main industrial installations.Rugged design together with the highest quality modern production techniques make these pumps suitable for heavy duty pumping.

proCess pumps Api 610

EASY MAINTENANCE

QUICK INSPECTIONThe use of a spacer type coupling allows dismantling of the pump without disconnecting the casing from the base or from the piping. Easy acces to the seal. For packing seal,the gland is in two parts, an arrange-ment wich permits replacement of the packing rings without dismantling the pump. Corrosion of the rota-ting assambly is eliminatedbecause the shaft, impeller key and screws are all made from stainless steel.

STANDARDIZATION OF COMPONENTSFor the wole range of these pumps, the number of bearing houses, shafts and dtuffing boxes has been standardized.This offers two advantages: 1° Spares facilityThe spares being common to seve-ral types of pumps, spares stock may be reduced to a bare minimum. 2° Easy modificationShould the user wish to modify the pump characteristics or the seal only the corre-sponding parts need to be ordered.

TYPE OF SEALSTo get the perfect tightness, can be used different types of seals.• Single mechanical seal • Double mechanical seal • Cartridge seal• Packing by request

14

Process

seCtionAl drAwinGs

SMKM Single stage • End Suction • Top Discharge • Beaing house cooling

SMKM Single stage • End Suction • Top Discharge • No bearing house cooling

• KSMKM Single stage • Two end bearing houses • Top Suction • Top Discharge • Bearing house cooling

KSMKM Two stage • Two end bearing houses • Top Suction • Top Discharge • Bearing house cooling

FGB – Barrel • Stuffing box vibration level to API

610 • Sleeve protected shaft in bearing

areas • Keyed impellers • Impeller & Casing wearing rings• Below mounting suction nozzle for

special applications

15

Process

proCess pumps Api 610

Size [DN] 1 1/2” - 14”

Poles 2 4

Capacity [m3/h] 8 - 1500 4 - 1300

Head [m] 10 - 350 5 - 130

Nom.Pressure [bar] 50




Construction

Casing St.Steel

Impeller St.Steel

Shaft Steel

Seal Mechanical

NotesOthers material follow API 610Vertical barrel construction for low NPSH servicesAvailable with ATEX Certification

Construction

CasingCast Iron/Nodular Cast Iron/Carbon Steel/ St.Steel/Duplex

ImpellerCast Iron/Bronze/St.Steel/Duplex

Shaft Alloyed Steel

Seal Mechanical

Barrel Steel

multistAGe VertiCAl pumps in bArrel

Size [DN] 6” - 18” 6” - 28”

Poles 2 4

Capacity [m3/h] up to 200 up to 1000





NotesOthers material follow API 610Available with ATEX Certification

16

Process

VertiCAl sinGle stAGe pumpsiso 2858

Construction

Casing St.Steel/Duplex

Impeller St.Steel/Duplex

Shaft St.Steel

Seal Mechanical


Size [DN] 32 - 100 32 - 300

Poles 2 4

Capacity [m3/h] 5 - 330 3 - 1300






sinGle stAGe CentrifuGAl pumps for AGGressiVe liquids

iso 2858, iso 5199

Construction

Casing St.Steel/Duplex

Impeller St.Steel/Duplex

Shaft St.Steel

Seal Mechanical

NotesSpecial Construction: Other AlloysAvailable with Magnetic DriveAvailable with ATEX Certification

Size [DN] 32 - 100 32 - 300

Poles 2 4

Capacity [m3/h] 5 - 330 3 - 1300






17

Process

speCiAl eXeCutions

ROTOS seal-less Mag-Drive pumps are now available in 18 different designs with over 250 basic models. This vast pump range allows our Engineering department to meet your exact process requirements. All ROTOS seal-less pumps and equipments are engineered to comply with latest Industrial Pump.

• ISO - Seal-less centrifugal magnetic drive pumps• API 685 - Seal-less MDP pumps for Petroleum Industry

In addition ROTOS produces custom engineered models for the most demanding applications:

• STM Seal-less regenerative turbine magnetic drive alloy pumps• PTM Seal-less regenerative turbine magnetic drive non-metallic pumps• SVM Seal-less rotary vane magnetic drive alloy pumps• PCM Seal-less centrifugal magnetic drive non-metallic pumps• SDM Seal-less centrifugal magnetic drive alloy pumps

seAl-less VertiCAl pumps

Seal-less Vertical Pumps, ensure leak-proof handling of cor-rosives. The heavy duty shaft is supported by ball bearings without bushings to wear; shaft deflection is theeby eliminated.

FEATURES• Non-cantilevered shaft • Hermetically sealed column • Heavy duty column shaft with oversized ball bearings • Modular impeller allows for modifying performances • Compact, high torque magnetic coupling with reduced

mass

Seal-less Vertical Pumps, ensure leak-proof handling of cor-rosives. The heavy duty shaft is supported by ball bearings without bushings to wear; shaft deflection is theeby eliminated.PCMV Pumps are fabricated from solid thermoplastic material to resist internal or external corrosion. The hermetically sealed column is permanently isolated from corrosive liquid or fumes.

FEATURES• Non-cantilevered shaft • Hermetically sealed column • Heavy duty column shaft with oversized ball bearings• Exclusive solid machined thermoplastic casing and

impeller components • Oversized, high purity ceramic thrust bearings and shaft • Modular impeller allows for modifying performances

seAl-less Api pumps

END SUCTION API 685 Seal-leas Pumps, are designed to meet critical nozzle loading and working pressure require-ments of API 685 standards.

FEATURES• Over designed pump casings and baseplates • Heavy duty containment housing for optimum safety • External lubrication systems maintains highest pressure

differential; allowing fordeadheading and flw or pres-sure monitoring

• Dual back-pull-out (access hydraulic end or power frame)

SEAL-LESS MULTISTAGE BARREL API Pumps are built for reliable, leak-proof operation in high discharge head app-lications.

FEATURES• Between bearings support with no overhung loads • Staggered volutes minimize residual radial loads • Dynamically balanced, back-to-back impellers for

minimal axial load • TOP-TOP Suction - Discharge• Heavy duty barrel casing • Working temperature up to 250 °C • Flow up to 200 m3/h • Head up to 500 m

mAGnetiC driVe seAl-less pumps

18

Process

metAlliC mAGnetiC driVe seAlless CentrifuGAl And turbine

pumps

plAstiC mAGnetiC driVe seAlless CentrifuGAl And turbine

pumps

Construction

Casing St.Steel

Impeller St.Steel

Shaft St.Steel

Bearing Silicon CarbideThrust Bearing Silicon CarbideMagnetic Drive CoSm

NotesSpecial Construction: Incoloy825-Hastelloy (C)Available with ATEX Certification

Construction Casing PP и PVDFImpeller PP и PVDF

Shaft Alumina or Silicon Carbide

Bearing PTFEC or Silicon Carbide

Thrust Bearing PTFEC or Silicon Carbide

Magnetic Drive FeBNe


Discharge nozzles 32 - 100

Poles 2 4

Capacity [m3/h] 8 - 200 3 - 100



Max. Pressure [bar] 25


Max.Temperature [0С] 300

Discharge nozzles 32 - 80

Poles 2 4

Capacity [m3/h] 1 - 100 1 - 60

Head [m] 4 - 45 1 - 11


Max. Pressure [bar] 10


Max.Temperature [0С] 100

19

Process

Pump unitThe pump is composed by:• Bowl.• Column pipe.• Discharge head with discharge elbow above or under

floor level, according to the requirements.

BowlThe bowl is composed by:• Suction bell.• Propeller or blades mounted on the proper hub.• Diffuser.The propeller blades can rotate around their axis.During mounting the blades can be positioned find locked according to the required conditions of service. Pump sizes over ”ELV 600” can be manufactured for blades adjustment during pump running. This operation can be made manually (by means of proper hand wheel) or automatically (by electric actuator). This advantage is considerable on plants where the capacity is subject to big variations.

Column pipeThe column pipe is composed by:• Conveying pipe.• Shaft.• Shaft bearing retainer.

Discharage headThe discharge head is composed by:• Support frame.• Discharge elbow: under or above floor level.• Motor stool.• Flexible coupling.• Axial thrust supporting unit, including grease or oil lub-ricated roller bearings:

When handling clear or slightly loaded liquids, the guide bearings in the column pipe are lubricated by the pumped liquid; in case of other special liquids our technical department will propose the proper solution.

Propeller pumps can be driven by:• Directly coupled electric motor.• Electric motor through reduction gear.• Diesel engine through right angle gear box.

elV/pen propeller pumps

Water scooping machines able to lift big quantities of fluid at low heads. The performance curves show the difference between these units and the centrifugal types of pumps, i.e. high brake horse power at low capacities.Taking into consideration what said above, it is important not to install gate valves, valves or other instruments on the delivery pipe to avoid the decrease of capacity and the consequent increase of pump brake horse power with motor overloading when the valves are partially or totally closed.

FIELD OF APPLICATIONThe capacity to pump big quantities of liquid at low heads allows the application of these pumps in various services. The most important are:

• Agriculture - irrigation of wide surfaces.

• Land reclamation - land reclamation and drainage of marsh land or areas subject to floods.

• Ecology - transfer or movement of big water quantities, anyhow treated or to be treated.

• Shipyards - dry docks pumping down.

They find also large application in the feeding of canals and transfer of fluvial or sea water. Capacities range from 200 up to 30.000 m3/h against heads from 1 up to 8 meters at one stage, and up to 16 m at two stages.

20

Firefighting

FIRE FIGHTING APPLICATIONSWith ”Audoli&Bertola” Division, Gruppo Aturia operates in the Fire-Fighting field as supplier of water fire fighting packages fully in compliance with the European Standards (EN 12845 e EN 12259-12) and the American Standards (NFPA 20). Audoli&Bertola technical skill allows to easily operate in building and industrial fields and to meet the hardest specifications required by refineries, petrochemical industries, off-shore, platform and on-shore plants.Audoli&Bertola has developed a product range for explosion proof areas: a lot of packages have been realized with diesel engines and gas engines suitable to operate in EExd IIBorC Atex classification area.Gruppo Aturia offers a wide range of centrifugal pumps for fire fighting application, both in vertical and in horizontal construction.

Audoli&Bertola is the only European Pumps Manufacturer to have obtained from ”Factory Mutual” the approval for:

- Vertical Turbine Pumps: from 500 GPM to 4000 GPM, at 50 and 60 Hz.- Split-Case Pumps: from 750 GPM to 2000 GPM, at 50 and 60 Hz.

PUMPING SYSTEMS: SPLIT CASE PUMPS

21

Firefighting

PUMPING SYSTEMS: VERTICAL PUMPS

22

Firefighting

FM Approved horizontal split-case type centrifugal fire pumps are relatively simple to operate and repair. These pumps have a two-part casing divided in a horizontal plane through the shaft center line. They are well suited to fire protection service where a water supply is obtainable under a positive head.

HORIZONTAL SPLIT CASE TYPE CENTRIFUGAL FIRE PUMPS

2 poles

PDN 150-300L 750-1000 USGPM

PDN 150-300M 1000-1250 USGPM

PDN 150-300H 1250-1500 USGPM

PDN 200-300M 2000 USGPM

4 poles

PDN 200-250B 1250-2000 USGPM

23

Firefighting

VERTICAL SHAFT, TURBINE TYPE CENTRIFUGAL FIRE PUMPS

Vertical shaft, turbine type centrifugal fire pumps have submerged impellers contained in a series-bowl assembly at the bottom of a vertical shaft. The de-sign is similar to pumps used extensively for industrial and municipal service. These pumps are FM Approved for discharging water from lakes, streams, open sumps, drilled wells and other equivalent subsurface sources. Each pump consists of a discharge head, motor stand, column pipe, line shaft, bowl as-sembly and suction strainer. For electric drive, FM Approved pumps must be used with a vertical, electric motor. For internal-combustion-engine drive, FM Approved pumps must be connected to the FM Approved engine through an FM Approved right-angle gear drive.

4 poles

VAB 152 500 - 750 USGPM

VAB 180 750 -1250 USGPM

VAB 200 1000 -1500 USGPM

VAB 250 1500 - 2500 USGPM

VAB 251 1500 - 2500 USGPM

VAB 302 2500 - 4000 USGPM

www.tapflo.rs

Novi Sad

Beograd

Priština

gruppo aturia product overview - tapflo.rs · the ehedg certification of our aseptic diaphragm pump...

Documents