grunfoss

13
Printed from Grundfos CAPS Product name Phase U [V] Pump outlet Q actual [m³/h] H actual [m] Energy [kWh/a] Price + energy TPE 40-230/2-S 3 380-480 DN 40 9 15 1960 On request 1/13

Upload: bassouad

Post on 08-Apr-2015

120 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: grunfoss

Printed from Grundfos CAPS

Product name Phase U [V] Pumpoutlet

Q actual[m³/h]

H actual [m] Energy [kWh/a] Price + energy

TPE 40-230/2-S 3 380-480 DN 40 9 15 1960 On request

1/13

Page 2: grunfoss

Printed from Grundfos CAPS

Installation and Input Sizing Results

Pump Curve Dimensional Drawing

Flow (Q): 9 m³/h Head (H): 15 m

Pumped liquid: HYCOOL 20

Max. operation pressure: 10 barMin. inlet pressure: 1.5 bar

Product number: 96275447 Type: TPE 40-230/2-S Quantity: 1 Supply: 380-480 V Motor: 1.1 kW speed controlled Flow: 9 m³/h ( max. +12 %) Head: 15 m ( max. +25 %) Power P1: 1.12 kWEta pump: 50.2 %Eta pump+motor: 39.6 % =Eta pump * Eta motorEta total: 39.6 % =Eta relative to the duty pointEnergy consumption: 1960 kWh/YearCO2 emission: 1120 kg/YearPrice: On request EUR Energy cost: 196 EUR /Year

Load profile 1 2 3 4 Flow 100 75 50 25 %Head 100 100 100 100 %P1 1.12 0.9 0.708 0.538 kWTime 600 600 600 600 h/YearEnergy consumption 672 540 425 323 kWh/Year

Q(m³/h)0 2 4 6 8 10 12 14

H(m)

0

4

8

12

16

20

24

P(kW)

0

0.4

0.8

1.2

1.6

88 %

100 %

1234

TPE 40-230/2-SQ = 9 m³/hH = 15 mn = 88 % / 44 HzViscosity = 3.2 mm²/sDensity = 1206 kg/m³

Eta pump = 50.1 %Eta pump+motor = 39.6 %

320

RP 1/4

6814

1

439

160

120

102 102

132

40

178167167

M12

167 167

132

132

132

2/13

Page 3: grunfoss

Printed from Grundfos CAPS

Position Qty. Description Single Price

1 Price on requestTPE 40-230/2-SProduct No.: 96275447Single-stage, centrifugal, in-line, single-headpump.

The in-line design with opposite suction and discharge ports enables mounting in pipework oron a concrete foundation.

The shaft seal is a corrosion resistant maintenance-free mechanical seal.

The pump is fitted with an IEC-flanged three-phaseMGE motor with frequency converter andPI-controller integrated in the motor terminal box. No additional motor protection is required asboth motor and electronics are protected by integrated overload and temperature protection.

A differential pressure transmitter fitted on thepump registers the differential pressure acrossthe pump and enables constant pressure or proportional pressure control of the pump.

A control panel enables setting of required setpoint as well as setting of pump to MIN or MAXoperation or to STOP. The control panel has indicator lights for "Operation" and "Fault".

Communication with the pump is possible by meansof Grundfos R100 Remote Control enabling furthersettings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption".

The terminal box holds terminals for the connection of :

- Pump start/stop (potential-free contact),- external remote setpoint setting via analog

signal, 0 - 5 V, 0 - 10 V, 0(4) - 20 mA,- 5 V voltage supply for setpoint potentiometer,

Imax = 5 mA,- differential pressure sensor factory-fitted,- input for forced control to MIN or MAX

(potential-free contact),- potential-free fault signal relay with

changeover contact,- RS485 GENIbus.

Liquid:Liquid temperature range: -25 .. 90 °CDensity : 1206 kg/m³Kinematic viscosity: 3.17 mm²/s

Technical:Speed for pump data: 2835 rpmRated flow: 12 m³/hResulting flow of the pump: 9 m³/hRated head: 17 mResulting head of the pump: 15 mType of shaft seal: RUUECurve tolerance: ISO 9906 Annex A

Materials:Material, pump housing: Cast iron

EN-JL1040 DIN W.-Nr.25 B ASTM

Material, impeller: Stainless steel1.4301 DIN W.-Nr.

3/13

Page 4: grunfoss

Printed from Grundfos CAPS

Position Qty. Description Single Price

304 AISI

Installation:Maximum ambient temperature: 40 °CSystem pressure: 16 barMax pressure at stated temp: 16 / 90 bar / °CMin inlet pressure: -0.8 barStandard, pipe connection: DINSize, pipe connection: DN 40Pressure stage, pipe connec.: PN 6 / PN 10Flange size for motor: FT100

Electrical data:Motor type: MGE90SAP2 : 1.1 kWMains frequency: 50 HzRated voltage: 3 x 380-480 VRated current: 2,60-2,30 ACos phi - power factor: 0,88-0,77Rated speed: 360-3430 rpmEnclosure class (IEC 34-5): IP55Insulation class (IEC 85): F

Others:Net weight: 45.8 kgGross weight: 49.2 kgShipping volume: 0.091 m³

4/13

Page 5: grunfoss

Printed from Grundfos CAPS

Position Qty. Description Single Price

1 Price on requestTPE 40-230/2-S

Note! Product picture may differ from actual product

Product No.: 96275447Single-stage, centrifugal, in-line, single-headpump.

The in-line design with opposite suction and discharge ports enables mounting in pipework oron a concrete foundation.

The shaft seal is a corrosion resistant maintenance-free mechanical seal.

The pump is fitted with an IEC-flanged three-phaseMGE motor with frequency converter andPI-controller integrated in the motor terminal box. No additional motor protection is required asboth motor and electronics are protected by integrated overload and temperature protection.

A differential pressure transmitter fitted on thepump registers the differential pressure acrossthe pump and enables constant pressure or proportional pressure control of the pump.

A control panel enables setting of required setpoint as well as setting of pump to MIN or MAXoperation or to STOP. The control panel has indicator lights for "Operation" and "Fault".

Communication with the pump is possible by meansof Grundfos R100 Remote Control enabling furthersettings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption".

The terminal box holds terminals for the connection of :

- Pump start/stop (potential-free contact),- external remote setpoint setting via analog

signal, 0 - 5 V, 0 - 10 V, 0(4) - 20 mA,- 5 V voltage supply for setpoint potentiometer,

Imax = 5 mA,- differential pressure sensor factory-fitted,- input for forced control to MIN or MAX

(potential-free contact),- potential-free fault signal relay with

changeover contact,- RS485 GENIbus.

Liquid:Liquid temperature range: -25 .. 90 °CDensity : 1206 kg/m³Kinematic viscosity: 3.17 mm²/s

5/13

Page 6: grunfoss

Printed from Grundfos CAPS

Position Qty. Description Single Price

Technical:Speed for pump data: 2835 rpmRated flow: 12 m³/hResulting flow of the pump: 9 m³/hRated head: 17 mResulting head of the pump: 15 mType of shaft seal: RUUECurve tolerance: ISO 9906 Annex A

Materials:Material, pump housing: Cast iron

EN-JL1040 DIN W.-Nr.25 B ASTM

Material, impeller: Stainless steel1.4301 DIN W.-Nr.304 AISI

Installation:Maximum ambient temperature: 40 °CSystem pressure: 16 barMax pressure at stated temp: 16 / 90 bar / °CMin inlet pressure: -0.8 barStandard, pipe connection: DINSize, pipe connection: DN 40Pressure stage, pipe connec.: PN 6 / PN 10Flange size for motor: FT100

Electrical data:Motor type: MGE90SAP2 : 1.1 kWMains frequency: 50 HzRated voltage: 3 x 380-480 VRated current: 2,60-2,30 ACos phi - power factor: 0,88-0,77Rated speed: 360-3430 rpmEnclosure class (IEC 34-5): IP55Insulation class (IEC 85): F

Others:Net weight: 45.8 kgGross weight: 49.2 kgShipping volume: 0.091 m³

6/13

Page 7: grunfoss

Printed from Grundfos CAPS

Q(m³/h)0 2 4 6 8 10 12 14

H(m)

0

4

8

12

16

20

24

P(kW)

0

0.4

0.8

1.2

1.6

88 %

100 %

1234

TPE 40-230/2-S

P2 = 884 WP1 = 1.12 kW

Q = 9 m³/hH = 15 mn = 88 % / 44 HzViscosity = 3.2 mm²/sDensity = 1206 kg/m³

Eta pump = 50.1 %Eta pump+motor = 39.6 %

Description ValueProduct name: TPE 40-230/2-S A-F-A RUUEProduct No: 96275447EAN number: 5700830062487 Technical:Speed for pump data: 2835 rpmRated flow: 12 m³/hResulting flow of the pump: 9 m³/hRated head: 17 mHead max: 230 dmResulting head of the pump: 15 mType of shaft seal: RUUECurve tolerance: ISO 9906 Annex APump No: 96463795Pump version: A Materials:Material, pump housing: Cast iron

EN-JL1040 DIN W.-Nr.25 B ASTM

Material, impeller: Stainless steel1.4301 DIN W.-Nr.304 AISI

Material code: A Installation:Maximum ambient temperature: 40 °CSystem pressure: 16 barMax pressure at stated temp: 16 / 90 bar / °CMin inlet pressure: -0.8 barStandard, pipe connection: DINConnect code: FSize, pipe connection: DN 40Pressure stage, pipe connec.: PN 6 / PN 10Flange size for motor: FT100 Liquid:Liquid temperature range: -25 .. 90 °CDensity: 1206 kg/m³Kinematic viscosity: 3.17 mm²/s Electrical data:Motor type: MGE90SAP2: 1.1 kWMains frequency: 50 HzRated voltage: 3 x 380-480 VRated current: 2,60-2,30 ACos phi - power factor: 0,88-0,77Rated speed: 360-3430 rpmEnclosure class (IEC 34-5): IP55Insulation class (IEC 85): FMotor No: 85775805 Others:Net weight: 45.8 kgGross weight: 49.2 kgShipping volume: 0.091 m³Config. file no: 96280119

7/13

Page 8: grunfoss

Printed from Grundfos CAPS

96275447 TPE 40-230/2-S

Q(m³/h)0 2 4 6 8 10 12 14

H(m)

0

4

8

12

16

20

24

P(kW)

0

0.4

0.8

1.2

1.6

88 %

100 %

1234

TPE 40-230/2-S

P2 = 884 WP1 = 1.12 kW

Q = 9 m³/hH = 15 mn = 88 % / 44 HzViscosity = 3.2 mm²/sDensity = 1206 kg/m³

Eta pump = 50.1 %Eta pump+motor = 39.6 %

8/13

Page 9: grunfoss

Printed from Grundfos CAPS

96275447 TPE 40-230/2-S

P2(kW)0 0.2 0.4 0.6 0.8 1 1.2

cos phieta

0

0.2

0.4

0.6

0.8

1

I(A)

0

1

2

3

4

5

n(rpm)

500

1000

1500

2000

2500

P1(kW)

0

1

2

P1

I

n

cos phi

eta

TPE 40-230/2-S + MGE90SA 1.1 kW 3* 400 V, 50 Hz

n = 100 %

9/13

Page 10: grunfoss

Printed from Grundfos CAPS

Note! All units are in [mm] unless others are stated.

96275447 TPE 40-230/2-S

320

RP 1/4

6814

1

439

160

120

102 102

132

40

178167167

M12

167 16713

2

132

132

10/13

Page 11: grunfoss

Printed from Grundfos CAPS

Note! All units are in [mm] unless others are stated.

96275447 TPE 40-230/2-S

-A

CONNECTION

7: SENSOR INPUT

8: +24V

9: GND

FOR PC-TOOL

2: RUN/STOP

3: GND

4: SETPOINT

5: +10V

6: GND

10K

96086116

B

A

+OU

T

+OU

T

- A A

1: DIGITAL INPUT

CONNECTION FORGRUNDFOS SENSOR

OPTIONAL

+

4-20M0/4-20M

0-10V

10/0-10V0/4-20M

MAX:250V/2A AC1MIN: DC 5V/1MA

SEE NAMEPLATEFOR FUTHER DATA

SUPPLY:

SIGNAL RELAY:

L1 L

2 L3

NC

C N

O

STOP

RUN

A:RS485

Y:SHIELD

B:RS485

11/13

Page 12: grunfoss

Printed from Grundfos CAPS

96275447 TPE 40-230/2-S

Input

Select Type of InstallationInstallation Type Primary system only One Chiller

Your RequirementsFlow (Q) 9 m³/hHead (H) 15 mPumped liquid HYCOOL 20 Min. liquid temperature -10 °CLiquid temperature during operation -10 °CMax. liquid temperature 50 °CMax. operation pressure 10 barMin. inlet pressure 1.5 barMax. inlet pressure 1.5 bar

Control Mode Constant Curve Type of Frequency Converter

Edit Load ProfileYearly operation time 100 daysLoad profile Standard profile Consumption Q1 100 %Consumption Q2 75 %Consumption Q3 50 %Consumption Q4 25 %Consumption Q1 9 m³/hConsumption Q2 6.75 m³/hConsumption Q3 4.5 m³/hConsumption Q4 2.25 m³/hTime T1 600 h/aTime T2 600 h/aTime T3 600 h/aTime T4 600 h/a

Configuration Single Preferred number of poles

Pump designPump material Inline Yes End Suction, Close Coupled Yes End Suction, Long Coupled Yes With spacer coupling Yes

Operational ConditionsFrequency 50 HzPhase 1 or 3 Starting method 3 Phase Min. power limit for SD start 5.5 kWVoltage 1 x 230 or 3 x 400 VAmbient temperature 20 °C

Hit list settingsAllow uncontrolled No Max. hits per product group 2 Max. hits total 8 Evaluation criterion Price + energy costsEnergy price 0.1 EUR/kWhCalculation period 15 years

Load Profile

1 2 3 4 Flow 100 75 50 25 %Head 100 100 100 100 %P1 1.12 0.9 0.708 0.538 kWTime 600 600 600 600 h/YearEnergy consumption 672 540 425 323 kWh/Year

Sizing result

Type TPE 40-230/2-S Quantity 1 Supply 380-480 V Motor 1.1 kW speed controlled Flow 9 m³/h ( max. +12 %) Head 15 m ( max. +25 %) Max. velocity 1.99 m/sMin.inlet pressure -0.8 bar ( 50 °C, against

atmosphere)Power P1 1.12 kWPower P2 0.884 kWEta pump 50.2 %Eta motor 78.9 %Eta pump+motor 39.6 % =Eta pump * Eta motorEta total 39.6 % =Eta relative to the duty pointEnergy consumption 1960 kWh/YearCO2 emission 1120 kg/YearPrice On request EUR Energy cost 196 EUR /YearPrice + energy costs On request EUR /15 YearsLife cycle cost On request EUR /15 Years

The shown results are only valid for Newtonian liquids!

Q(m³/h)0 2 4 6 8 10 12

H(m)

0

4

8

12

16

20

P(kW)

0

0.4

0.8

1.2

88 %

100 %

1234

TPE 40-230/2-SQ = 9 m³/hH = 15 mn = 88 % / 44 HzViscosity = 3.2 mm²/sDensity = 1206 kg/m³

Eta pump = 50.1 %Eta pump+motor = 39.6 %

12/13

Page 13: grunfoss

Printed from Grundfos CAPS

Load profile Q

[m³/h]

0t

[h]

9.0

600

6.8

1200

4.5

1800

2.3

2400

1 2 3 4 Flow 100 75 50 25 %Head 100 100 100 100 %P1 1.12 0.9 0.708 0.538 kWTime 600 600 600 600 h/YearEnergy consumption 672 540 425 323 kWh/Year

Total head 15 m

Dimensioning flow 9 m³/h

13/13