grove gmk4115 - iron stag crane service, incironstagcrane.com/charts/115t-grove-gmk4115.pdf ·...
TRANSCRIPT
Grove GMK4115Product Guide
Features
• 100 t (115 USt) capacity
• 11,3 m - 52 m (37 ft - 171 ft) six-section full-powerMEGAFORM™ boom with TWIN-LOCK™ pinning
• 10 m - 17 m (33 ft - 56 ft) hydraulic offset bi-fold swingaway
• 2x5 m (16 ft) intermediate lattice inserts
• 26,1 t (57,500 lb) counterweight withhydraulic removal system
• MEGATRAK™ independent hydro-pneumatic suspension
Grove GMK4115 11THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane
Load chartMain boom
OutriggersCounterweight
Pounds x 1000Boom Extension
Feet 37.1 49.7 62.8 76.3 90.0 103.8 116.5 131.3 144.9 158.0 170.6 Feet
8 * 230.0 810 161.0 146.0 138.0 123.0 1015 126.0 123.0 115.0 108.0 93.0 1520 101.0 102.0 95.0 89.0 84.0 71.0 56.0 41.8 2025 85.0 85.0 80.0 75.0 72.0 65.0 52.0 41.8 32.2 2530 73.0 70.0 65.0 62.0 58.0 47.0 41.0 32.2 25.4 21.0 3035 63.0 62.0 56.0 54.0 53.0 42.0 37.8 32.2 25.4 21.0 3540 52.0 49.0 48.0 47.0 37.6 34.2 31.4 25.4 21.0 4045 43.2 42.6 41.6 41.6 34.0 31.0 28.8 25.4 21.0 4550 37.8 37.8 36.0 36.2 30.8 28.4 26.4 24.2 21.0 5055 32.6 32.4 31.8 28.0 25.6 24.2 22.6 20.8 5560 28.4 29.6 28.2 25.6 23.2 21.8 21.0 19.6 6065 24.8 26.2 25.2 24.0 21.4 20.2 19.4 18.4 6570 23.4 22.4 22.8 19.8 18.8 18.0 17.4 7075 20.8 19.8 21.0 18.4 17.4 16.8 16.4 7580 18.6 18.8 16.6 16.0 15.4 15.2 8085 17.8 16.8 15.4 14.6 14.2 14.0 8590 16.2 15.2 14.6 13.2 12.8 12.6 9095 13.8 13.6 12.2 11.8 11.8 95
100 12.4 12.6 11.2 11.0 11.0 100105 11.8 10.6 10.2 10.2 105110 10.8 10.2 9.6 9.8 110115 9.8 9.8 9.2 9.0 115120 9.0 8.6 8.0 120125 8.2 8.0 7.2 125130 7.6 7.2 6.6 130135 6.6 5.8 135140 6.0 5.2 140145 4.6 145150 4.2 150155 3.6 155
*Over rear with special equipment
11,3 m - 52 m (37 ft - 171 ft)
26 082 kg(57,500 lb)
360˚7,0 m(23 ft)100%
18
Load chartHydraulic offset swingaway
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane
OutriggersCounterweight
Pounds x 1000Boom Extension
Feet 170.6 + 32.8 170.6 + 55.8 170.6 + 72.2 170.6 + 88.6 Feet0° 0°-20° 20°-40° 0° 0°-20° 20°-40° 0° 0°-20° 20°-40° 0° 0°-20° 20°-40°
35 10.8 3540 10.8 10.8 7.4 5.8 4045 10.8 10.8 7.4 5.8 4.0 4550 10.8 10.8 10.0 7.4 5.8 4.0 5055 10.8 10.8 10.0 7.7 7.4 5.8 4.0 5560 10.8 10.8 10.0 7.4 7.4 5.8 5.8 4.0 6065 10.8 10.8 10.0 7.4 7.4 5.8 5.8 4.0 6570 10.8 10.8 10.0 7.4 7.4 6.2 5.8 5.8 4.0 4.0 7075 10.8 10.8 10.0 7.4 7.4 6.2 5.8 5.8 5.6 4.0 4.0 7580 10.8 10.8 10.0 7.4 7.4 6.2 5.8 5.8 5.6 4.0 4.0 4.0 8085 10.8 10.4 10.0 7.4 7.4 6.2 5.8 5.8 5.6 4.0 4.0 4.0 8590 10.4 10.0 9.8 7.4 7.2 6.2 5.8 5.8 5.6 4.0 4.0 9095 10.0 9.8 9.6 7.4 7.2 6.0 5.8 5.8 5.6 4.0 4.0 4.0 95
100 9.4 9.4 9.2 7.4 7.0 6.0 5.8 5.8 5.6 4.0 4.0 4.0 100105 9.0 9.0 9.0 7.4 6.8 6.0 5.8 5.8 5.6 4.0 4.0 4.0 105110 8.4 8.6 8.6 7.4 6.8 5.8 5.8 5.8 5.6 4.0 4.0 4.0 110115 8.0 8.2 8.4 7.2 6.6 5.8 5.8 5.6 5.6 4.0 4.0 4.0 115120 7.4 7.6 8.0 6.8 6.4 5.8 5.8 5.6 5.4 4.0 4.0 4.0 120125 7.0 7.0 7.6 6.6 6.4 5.8 5.6 5.4 5.2 4.0 4.0 4.0 125130 6.4 6.4 6.8 6.4 6.2 5.6 5.4 5.2 5.0 4.0 4.0 4.0 130135 5.8 5.8 6.2 6.0 6.0 5.6 5.2 5.0 5.0 4.0 4.0 4.0 135140 5.0 5.0 5.4 5.6 5.6 5.6 5.0 4.8 4.8 4.0 4.0 4.0 140145 4.6 4.6 4.8 5.0 5.0 5.6 4.8 4.6 4.6 3.8 3.8 3.8 145150 4.0 4.0 4.4 4.4 4.4 5.2 4.2 4.2 4.6 3.6 3.6 3.6 150155 3.4 3.4 3.8 4.0 4.0 4.6 3.8 3.8 4.4 3.6 3.6 3.6 155160 3.0 3.0 3.6 3.6 4.2 3.4 3.4 4.0 3.2 3.2 3.4 160165 2.6 2.6 3.0 3.0 3.6 2.8 2.8 3.6 2.8 2.8 3.4 165170 2.2 2.2 2.6 2.6 3.2 2.4 2.4 3.0 2.4 2.4 3.0 170175 1.8 1.8 2.2 2.2 2.8 2.0 2.0 2.6 2.0 2.0 2.6 175180 1.4 1.4 2.0 2.0 1.8 1.8 2.2 1.6 1.6 2.2 180185 1.6 1.6 1.8 1.8 185190 1.4 1.6 190
52 m (171 ft) 26 082 kg(57,500 lb)
360˚7,0 m(23 ft)100%
10-17-22-27 m(32.8-55.8-72.3-88.6 ft)
Hydraulic luffing stationary
Grove GMK4115 19THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane
Load chartHydraulic offset swingaway
OutriggersCounterweight
Pounds x 1000Boom Extension
Feet 170.6 + 32.8 170.6 + 55.8 170.6 + 72.2 170.6 + 88.6 Feet0°-20° 20°-40° 0°-20° 20°-40° 0°-20° 20°-40° 0°-20° 20°-40°
35 3540 10.8 4045 10.8 4550 10.8 9.4 5055 10.8 9.4 7.2 5560 10.8 9.4 7.2 5.8 6065 10.8 9.4 7.2 5.8 6570 10.8 9.4 7.2 6.0 5.8 4.0 7075 10.8 9.4 7.2 6.0 5.8 5.2 4.0 7580 10.4 9.4 7.2 6.0 5.8 5.2 4.0 4.0 8085 10.0 9.4 7.0 6.0 5.8 5.2 4.0 4.0 8590 9.6 9.4 6.8 5.8 5.8 5.2 4.0 4.0 9095 9.2 9.2 6.6 5.8 5.8 5.2 4.0 4.0 95
100 8.8 8.8 6.4 5.6 5.8 5.2 4.0 4.0 100105 8.6 8.6 6.2 5.6 5.8 5.2 4.0 4.0 105110 8.2 8.2 6.0 5.4 5.6 5.2 4.0 4.0 110115 7.8 8.0 6.0 5.4 5.4 5.2 4.0 4.0 115120 7.4 7.6 5.8 5.4 5.2 5.2 4.0 4.0 120125 6.6 7.2 5.6 5.2 5.0 5.0 4.0 4.0 125130 6.0 6.4 5.6 5.2 5.0 4.8 4.0 4.0 130135 5.4 5.8 5.4 5.2 4.8 4.8 3.8 3.8 135140 4.8 5.2 5.2 5.2 4.6 4.6 3.8 3.8 140145 4.4 4.6 4.8 5.0 4.4 4.4 3.6 3.6 145150 3.8 4.2 4.2 4.8 4.2 4.4 3.4 3.4 150155 3.4 3.6 3.8 4.4 3.6 4.2 3.4 3.4 155160 3.0 3.4 4.0 3.2 3.8 3.2 3.2 160165 2.6 3.0 3.6 2.8 3.4 2.8 3.2 165170 2.2 2.6 3.2 2.4 3.0 2.4 3.0 170175 1.8 2.2 2.8 2.0 2.6 2.0 2.6 175180 1.4 2.0 1.8 2.2 1.6 2.2 180185 1.6 1.8 1.8 185190 1.4 1.6 190
52 m (171 ft) 26 082 kg(57,500 lb)
360˚7,0 m(23 ft)100%
10-17-22-27 m(32.8-55.8-72.3-88.6 ft)
Hydraulic luffing loads luffing
10
Working rangeMain boom
Hei
ght
from
the
gro
und
in fe
et
180
160
140
120
100
80
60
40
20
0
160 140 120 100 80 60 40 20 0
Operating radius in feet from axis of rotation
82°170.6'
158.0'
144.49'
131.3'
116.5'
103.8'
90.0'
76.3'
62.8'
49.7 '
37.1'
11,3 m - 52 m (31 ft - 171 ft) main boom
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane
16
Working rangeHydraulic offset swingaway
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane
52 m (171 ft) main boom with hydraulic luffing 10 m (32.8 ft) and 17 m (55.8 ft) swingaway
Hei
ght
from
the
gro
und
in fe
et
240
220
200
180
160
140
120
100
80
60
40
20
0
200 180 160 140 120 100 80 60 40 20 0
Operating radius in feet from axis of rotation
+55.8'
+32.8'
170.6'
0°20°
40°
Grove GMK4115 17THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane
Working rangeHydraulic offset swingaway
52 m (171 ft) main boom with hydraulic luffing 17 m (55.8 ft) swingaway and two 5 m (16 ft) inserts
Hei
ght
from
the
gro
und
in fe
et
Boo
m a
nd e
xten
sion
leng
th in
feet
260
240
220
200
180
160
140
120
100
80
60
40
20
0
200 180 160 140 120 100 80 60 40 20 0
Operating radius in feet from axis of rotation
170.6 '
0°20°
40°
+88.6'
5Grove GMK4115L *Denotes optional equipment
EKS 5 with full graphic display3,3 m (10.8 ft) side-stowed 3-sheave heavy duty jibAdditional fuel tank for superstructure 185 L (49 gal) integrated in swingaway
Specifications
24V system with three phase alternator, 28V/80A. 2 batteries 12V/170 Ah.
Electrical system
Carrier
Box type, torsion resistant frame is fabricated from high strength steel.
Chassis
Four hydraulic single stage outrigger beams with vertical cylinders and outrigger pads, 500 mm (19.7 in) square. Outrigger can be set in 5 positions:Full 7 m (23 ft)Partial 6 m (19.6 ft)Partial 5 m (16.4 ft)Partial 4 m (13.2 ft)Retracted 2,6 m (8.4 ft)Independent horizontal and vertical movement controlled from each side of carrier and the superstructure cab. Electronic crane level indicators. Includes outrigger monitoring system.
Outrigger system
Base boom mounted work lightsBoom mounted aircraft warning lightStainless steel exhaust system with spark arrestorDiesel heater, also serves as engine preheater includes 24 hour timer for preheaterEngine independent propane gas cab heaterAdditional worklight for superstructure cabStereo radio/CD playerAir conditioningDrive and steer control for superstructure
*Optional equipment
Superstructure continued
Hoist
Main and auxiliary hoist are powered by axial piston motor with planetary gear and multiple disc brake. “Thumb-thumper” hoist drum rotation indicator alerts operator of hoist movement.
Main AuxiliaryLine length: 255 m 255 m
(837 ft) (837 ft)Rope diameter: 17 mm 17 mmLine speed: 120 m/min 120 m/min
(394 fpm) (394 fpm)Line pull: 56 kN 56 kN
(12,589 lb) (12,589 lb)
Mercedes-Benz OM 460 LA direct injected with 315 kW (422 bhp) at 1800 rpm.Max torque: 2000 Nm (1549 ft-lb) at 1300 rpm.Engine emission: EUROMOT/EPA/CARB Tier IVi (non-road)
Engine
Lifting capacity Sheaves Weight
Parts of line
Possible load with the crane*
100 t(110 USt) 7 1000 kg
(2200 lb) 2-1582 t
(90 USt)
63 t(70 USt) 5 750 kg
(1653 lb) 2-1161 t
(67 USt)
40 t(44 USt) 3 550 kg
(1213 lb) 1-739 t
(43 USt)
20 t(22 USt) 1 300 kg
(661 lb) 1-317 t
(18.7 USt)
8 t(8.8 USt) H/B 200 kg
(440 lb) 15,7 t
(6.3 USt)
* varies depending on national regulations
*Optional hookblocks
400 L (106 gal). Supplies superstructure and carrier engines.
Fuel tank capacity
Daimler Chrysler, G240-1616 forward and 2 reverse speeds2 speed transfer case
Transmission
8x6x8
Drive/steer