ground vehicle standards newsletter · 2018. 1. 27. · ground vehicle standards newsletter volume...
TRANSCRIPT
Ground Vehicle Standards NewsletterVolume 1, Issue 1 March 2010
Creating harmonized standards solutions. Moving the on- and off-road vehicle industry forward.
New standard defines electric-vehicle charging couplerSAE International has released a standard that provides a standard interface between plug-in hybrid and battery-electric vehicles, and electrical charging systems.
Standard J1772™, “SAE Electric Vehicle Conductive Charge Coupler,” spells out the general physical, electrical and performance requirements for the coupler, which consists of a connector and vehicle inlet. The purpose of the standard is to define a common electric-vehicle charging network, thereby reducing costs and increasing convenience for owners of electric vehicles.
“SAE International has long been at the forefront of standards development for the automotive industry. This important new standard continues that tradition,” David L. Schutt, PhD, Chief Executive Officer of SAE International said. “I applaud the work of the industry leaders from around the world who developed this standard, helping to ensure that today’s and tomorrow’s vehicles are ready to meet the needs of the consumer and the marketplace, and helping to positively shape the future of transportation.”
SAE International is a leading standards organization identified in the NIST Framework and Roadmap for Smart Grid Interoperability Standards for Interoperability Standards to Support Plug-In Electric Vehicles and as collaborators for Energy Storage Interconnection guidelines.
Gery Kissel is Chair of the SAE Hybrid Task Force. He explained that consistency and reliability are key goals of the new standard. “By standardizing, you’re reducing costs and allowing everyone to use the same connector. All of the charging equipment you would pull up to in public would have identical connectors, so any vehicle could use one. It will be a consistent, reliable interface,” Kissel said.
In the process of SAE J1772™ development, a production tooled coupler has passed testing by Underwriters Laboratories for safety and durability.
SAE J1772™ standard was developed by the SAE Hybrid J1772 Task Force in cooperation with major automotive OEMs and suppliers, charging equipment manufacturers, national labs, utility companies, universities and standards organizations from North America, Europe and Asia.
Learn more: • ThedocumentwasapprovedinJanuary2010andcanbepurchased at www.sae.org/technical/standards/J1772_201001• ForinformationonSAEInternational’sinvolvementintheSmartGrid visit www.sae.org/smartgrid• ReadmoreaboutthisnewstandardatAutomotive Engineering International Online: www.sae.org/mags/aei/7479• SAEInternationaltohostvehiclebatterysummitinShanghai. See page 1 of this newsletter
J1772 specifies a five-pin connector for delivering 120 or 240 V. (General Motors)
Phot
o fro
m A
utom
otive
Eng
ineer
ing In
tern
ation
al On
line,
15-J
an-2
010
12:0
9 G
MT
Issue Highlights: New committee formed to create vehicle battery standards .........................................................................C2SAE to host Vehicle Battery Summit in Shanghai ...1New & Revised SAE Technical Standards ...................2 Test results of low GWP refrigerant for mobile air-conditioning released .................................................4 SAE recommended practice puts new shine on corrosion testing ................................................................5SAE standard serves as basis for on-highway motorcycle sound legislation ..........................................6Document Sponsors; Corporate Support ..............8, 9Standards Hot Spot at SAE 2010 World Congress ............................................................................11 Call for Volunteers ............................................................11What’s new? Who’s new? ............................................13 Volunteer Awards ............................................................10
World Headquarters, 400 Commonwealth Dr., Warrendale, PA 15096 USA; 1-724-776-4841Automotive Headquarters, 755 W. Big Beaver, Suite 1600, Troy, MI 48084 USA; 1-248-273-2494www.sae.org
New committee formed to create vehicle battery standardsFrom Automotive Engineering International Online, 18-Nov-2009 15:36 GMT
The continued development of advanced battery technologies will play a critical role as vehicle manufacturers increase the availability of hybrid-electric vehicles and amp up efforts to commercialize vehicles that rely largely or fully on the battery as a propulsion power source, according to SAE International. To help standardize development, SAE is forming a Vehicle Battery Standards Committee.
We, along with the Alliance of Automobile Manufacturers (Alliance) and the Association of International Automobile Manufacturers (AIAM), recognize the importance that batteries and battery technology play in the design and development of new vehicles,” said David L. Schutt, Ph.D., Chief Executive Officer, SAE International. “SAE International has long been at the forefront of standards development, and we feel that this committee will fill a crucial need in the development of this technology.”
The battery committee initially will focus on standardizing battery performance and safety, and it will ensure harmonization with other standards-development activities in the U.S. and around the world.
“AIAM members look forward to the opportunity to participate in the new SAE Vehicle Battery Standards Committee,” said Michael J. Stanton, President and CEO of AIAM. “The work of this committee will be of great value to vehicle and battery manufacturers and, in particular, will help assure appropriate levels of safety are incorporated into battery systems for vehicle propulsion.”
The SAE Vehicle Battery Standards Committee will report to the SAE Motor Vehicle Council, which is responsible for development of all passenger-car, light-duty-truck, and van standards within SAE International.
“The Alliance of Automobile Manufacturers fully supports the creation by SAE of a new Vehicle Battery Standards Committee,” said the Alliance’s Robert Strassburger, Vice President of Safety and Harmonization. “This is consistent with SAE’s traditional role of drawing together leading industry experts to develop standards that help guide the auto industry with state-of-the-art design practices. Advanced battery technology is one of the most important technical issues being addressed by Alliance members today. SAE’s involvement will complement Alliance members’ actions already in place to develop electric vehicle technologies with a high level of safety.”
Revised document defines vehicle dimensions facilitating comparisons within and across OEMsSAE Recommended Practice J1100, issued by the Human Accommodations and Design Devices Committee, defines a set of measurements and standards procedures for motor vehicles. When applied consistently, it facilitates vehicle-to-vehicle comparisons within an OEM as well as provides a means to compare vehicle dimensions across OEM’s. This revision harmonizes the procedures between SAE and the Global Car manufacturer’s Information Exchange (GCIE), a consortium of OEM’s that exchange dimensional information and original data.
With common definitions, vehicle manufacturers do not need to maintain one set of design dimensions for SAE reporting and a separate set for data exchange between manufacturers.
The dimensions in this practice can be applied to an actual vehicle or in a CAD system whether an OEM uses the original H-Point Machine (HPM) defined in SAE J826 or the newer second generation machine (HPM-II) defined in SAE J4002. Similarly, head contour clearances and outward visibility targets can be determined regardless of the revision level an OEM may require of SAE J941 and SAE J1052.
In 2009, foot controls and pedal spacing dimensions were expanded to include codes congruent with ISO3409. Dimensions used to evaluate the location of the foot controls relative to one another or relative to the driver were retained; however, the dimension codes were revised to reflect the component being measured.
SAE J1100 - Motor Vehicle Dimensions, published in November 2009, was sponsored by Neil E. Mitchell, General Motors Company.
1
SAE International to Host Vehicle Battery Summit in ShanghaiScheduled for 1-3 September 2010, in Shanghai, China, SAE will host an international Summit that will bring together some of the world’s most highly regarded engineers, scientists, and corporate decision makers from the battery, automotive, power storage and mining industries. Participants will present an assessment of current and future Li-ion battery systems capabilities and alternatives as well as their marketplace and supply chain implications.
The Summit is chaired by Dr. Menahem Anderman, President of Advanced Automotive Batteries USA and founder of Total Battery Consulting, Inc. Dr. Anderman a veteran battery consultant is known in the industry for organizing the annual Advanced Automotive Battery Conferences (AABC) and for publishing multi-client studies assessing advanced vehicle market and technology with emphasize on energy storage. Dr. Anderman is organizing an exceptional roster of more than twenty expert speakers representing some of the key international players in vehicle battery and related industries.
Designed for corporate-level engineering and business decision makers, the program highlights the emerging Chinese market but will also discuss technological advances and worldwide market growth, exploring their implications for the global marketplace and thereby providing the insight required for optimum business decision making. It will review battery manufacturing in China and elsewhere, battery reliability, safety, cost, performance, and standardization, among others.
The Summit will provide an exclusive opportunity to interact with corporate technology peers from the automotive OEM, the battery components and manufacturing industry, and the lithium mining industry. The event will include opportunities for corporate sponsorships and exhibits as well as technology related poster sessions.
The Summit is organized in cooperation with Advanced Automotive Batteries USA and the China Automotive Technology and Research Center (CATARC). It is co-sponsored by the Society of Automotive Engineers of China (SAE-China) and will be held at the Shanghai Marriott Hongqiao Hotel.
Visit http://www.sae.org/events/battery for more details as they become available.
SAE: A Global Partner in Standards Development
In addition to the maintenance and development of its family of technical standards, SAE International is also an active partner with other standards development organizations, government agencies, and regulatory bodies to support the newest, most robust, and comprehensive standards products for a changing global marketplace.
• USDepartmentofTransportation• SocietyofAutomotiveEngineersofJapan(JSAE)• GermanElectricalandElectronicManufacturersAssociation(ZVEI)• USFederalHighwayAdministration• ChinaAutomotiveTechnology&ResearchCenter(CATARC)• NationalHighwayTrafficSafetyAdministration• KoreanAgencyforTechnologyandStandards(KATS)• USDepartmentofEnergy• JapanAutomobileResearchInstitute(JARI)• USEnvironmentalProtectionAgency• BrasilianNationalStandardsOrganization(ABNT)• AmericanNationalStandardsInstitute(ANSI)• AutomotiveElectronicsCouncil(AEC)• InternationalOrganizationforStandardization(ISO);USrepresentative
2
New & Revised SAE Technical Standards (Nov 2009 – Jan 2010) Council: Materials, Processes & Parts Doc Pub Date Status Title Responsible Committee J323 NOV09 Revised Test Method for Determining Cold Textile And Flexible Plastics Cracking of Flexible Plastic Materials J855 NOV09 Revised Test Method of Stretch and Set of Textile And Flexible Plastics Textiles and Plastics
J441 NOV09 Revised Cut Wire Shot Surface Enhancement
J2597 JAN10 Issued Computer Generated Shot Peening Surface Enhancement Saturation Curves
J935 NOV09 Reaffirmed High-Strength Carbon and Alloy Carbon And Alloy Steels Die Drawn Steels
J403 DEC09 Revised Chemical Compositions Carbon And Alloy Steels of SAE Carbon Steels
J2816 DEC09 Issued Guide for Reliability Analysis Using Ground Vehicle Reliability the Physics-of-Failure Process
J515 JAN10 Revised Specification for O-Ring Materials Hydraulic Tube Fittings Used with Hydraulic Connectors
Council: Motor Vehicle Doc Pub Date Status Title Responsible CommitteeJ850 NOV09 Revised Fixed Rigid Barrier Collision Tests Impact And Rollover Test Proced Stds
J2481 NOV09 Revised Dynamic Simulation Sled Testing Impact And Rollover Test Proced Stds
J1538 JAN10 Revised Glossary of Automotive Inflatable Inflatable Restraints Restraint Systems
J2802 JAN10 Issued Blind Spot Monitoring System Safety And Human Factors Steering (BSMS): Operating Characteristics and User Interface J1100 NOV09 Revised Motor Vehicle Dimensions Human Accom And Design Devices Stds
J2540/2 NOV09 Revised ITIS Phrase Lists (International Advanced Traveler Information Systems Traveler Information Systems) J2735 NOV09 Revised Dedicated Short Range Dedicated Short Range Communications Communication Tech (DSRC) Message Set Dictionary
J2402 JAN10 Revised Road Vehicles - Symbols for Controls And Displays Standards Controls, Indicators, and Tell-tales J1474 DEC09 Revised Heavy-Duty Nonmetallic Engine Cooling Systems Standards Cooling Fans--Material, Manufacturing and Test Considerations
J216 JAN10 Revised Motor Vehicle Glazing – Electrical Glazing Materials Standards Circuits
J2261 JAN10 Revised Stop Lamps and Front- and Heavy Duty Lighting Rear-TurnSignal Lamps for Use Standards on Motor Vehicles 2032 mm or More in Overall Width J2530 NOV09 Revised Aftermarket Wheels—Passenger Wheel Standards Cars and Light Truck—Performance Requirements and Test Procedures
3
J1982 JAN10 Revised Nomenclature - Wheels for Wheel Standards Passenger Cars, Light Trucks, and Multipurpose Vehicles
J649 JAN10 Revised Automatic Transmission Automatic Transmission Transaxle Functions – Terminology J2275 JAN10 Revised Internal Combustion Engines – Piston And Ring Standards Piston Ring-Grooves
J2602-3 JAN10 Issued File Structures for a Node Vehicle Architecture For Capability File (NCF) Data Communications J2716 JAN10 Revised SENT - Single Edge Nibble Transmission Vehicle Architecture For for Automotive Applications Data Communications J1699/3 DEC09 Revised Vehicle OBD II Compliance Vehicle E E System Test Cases Diagnostic Standards J551/17 JAN10 Revised Vehicle Electromagnetic Immunity – Electromagnetic Compatibility (EMC) Power Line Magnetic Fields J2464 NOV09 Revised Electric and Hybrid Electric Vehicle Battery Standards Vehicle Rechargeable Energy Storage System (RESS) Safety and Abuse Testing
J1459 DEC09 Revised V-Ribbed Belts and Pulleys Belt Drive (Automotive)Systems
Council: Truck & Bus Doc Pub Date Status Title Responsible CommitteeJ1911 NOV09 Revised Test Procedure for Air Reservoir Truck And Bus Brake Supply Capacity—Truck and Bus And Control Components
J1772 JAN10 Revised SAE Electric Vehicle and Plug in Hybrid Hybrid Electric Vehicle Conductive Charge Coupler
J2191 JAN10 Revised Recommended Practice for Truck And Bus Electrical Systems Identification Of Standardized Truck and Tractor Electrical Circuits
Council: Specialized Vehicle & Equipment Doc Pub Date Status Title Responsible CommitteeJ2120 NOV09 Reaffirmed Personal Watercraft— Personal Watercraft Electrical Systems
J755 DEC09 Revised Marine Propeller-Shaft Ends Marine Technical Steering and Hubs
J2656 JAN10 Revised Fastener Part Standard – Hexagon Ship Systems - Fasteners Socket, Square Head, and Slotted Headless Set Screws - Inch Dimensioned
Council: Construction, Agricultural & Off-Road MachineryDoc Pub Date Status Title Responsible CommitteeJ817 DEC09 Reissued Engineering Design Serviceability Machine Technical Steering Guidelines—Construction and Industrial Machinery—Maintainability Index—Off-Road Work Machines
J2129 JAN10 Revised Guidelines for Requests Received Construction Agricultural from Outside Sources for the And Off Road Machinery Council CONAG Council to Originate or Review Technical Reports
4
Test results of low GWP refrigerant for mobile air-conditioning releasedA Cooperative Research Program conducted through SAE International to investigate the safety and environmental performance of a new refrigerant for mobile air conditioning systems, announced in November 2009 the successful completion of its research. Based on these results, the sponsors of the SAE CRP1234 have concluded that HFO-1234yf can be used as the global replacement refrigerant in future mobile air conditioning systems. From the evaluation and test results it has been concluded that HFO-1234yf can be safely accommodated through established industry standards and practices for vehicle design, engineering, manufacturing, and service.
The report is the third SAE report to evaluate the new refrigerant. The recent two-year long global research program was to determine the safety and environmental characteristics of HFO-1234yf. These investigations have confirmed that HFO-1234yf is an environmentally friendly refrigerant suitable for use in direct expansion Mobile Air Conditioning (MAC) systems. HFO-1234yf is a non Ozone Depleting Substance with a Global Warming Potential (GWP) of 4. In comparison, the current refrigerant, R-134a, has a GWP of 1430.
As part of the studies the automotive industry conducted evaluations on a variety of vehicle applications. Additional testing and research was conducted at internationally recognized laboratories to verify worldwide acceptance for one common global replacement refrigerant. The vehicle OEMs evaluated the investigations conducted by Gradient LLC (USA), Exponent Engineering and Scientific Consulting (USA), Creative Thermal Solutions [CTS] (USA), Institut National de l’Environnement Industriel et des Risques [INERIS] (France), – Institut fur Luft und Kältetechnik - Dresden [ILK- Dresden] (Germany), TNO (The Netherlands), Underwriters Laboratories (USA), WIL Research Laboratories (USA), Det Norske Veritas (Norway/Japan), Hamner Institutes for Health Sciences (USA) and Hughes Associates Inc. in USA.
The results from the CRP1234 programs that investigated the new refrigerant for use in mobile air conditioning systems (cars and light trucks) are available on-line at www.sae.org/standardsdev/tsb/cooperative/crp1234-3.pdf
Extensive testing supported by multimillion dollar (USA) funding and in-kind support for SAE CRP1234 projects has been provided by 15 vehicle OEMs (from China, France, Germany, India, Italy, Japan, Korea, Sweden, UK, and USA,) and 18 Tier one suppliers (from Asia, Europe, and USA).
An economical pathway for joint venture research: the Cooperative Research Program of SAE
Cooperative research ventures serve to bring more minds to the challenges and issues faced by industry. The result is a more robust project than each participating organization could complete independently. The pooling of financial resources also affords each participant more efficient use of their research budgets and eliminates duplication of efforts. Whether moving forward on the development of fuel cell standards…researching alternative refrigerants to HFC 134a…or developing a database of human body measurements to foster ergonomic designs, SAE’s Cooperative Research Program can assist your company in its collaborative research needs.
To learn more contact Gary Pollak, Program Manager +1-724-772-7196; [email protected]
5
SAE recommended practice puts new shine on corrosion testingExcerpted from Automotive Engineering International Online, 08-Sep-2009 16:29 GMT
A new SAE recommended practice (J2721 - Recommended Corrosion Test Methods for Commercial Vehicle Components) aims to improve the corrosion resistance of parts and assemblies used in medium- and heavy-duty trucks, trailers, and buses. The tests, with an emphasis on in-lab work, incorporate recurring conditions such as corrosive chemicals, drying, humidity, and abrasive exposure, as well as variations in the environment.
“Vehicle corrosion standards available today do not provide suitable coverage for new de-icing chemicals and application methods, nor do they adequately account for aggravating effects such as temperature extremes, abrasion, and mechanical stress,” said Vern Caron, Chair of the SAE Truck and Bus Corrosion Committee, which developed SAE J2721. “This standard was developed to address these issues and also to provide a methodology for evaluating laboratory results and correlating these results with field performance.”
Components at different locations on the vehicle require different tests, according to Caron, Director of Electronics for the ArvinMeritor Commercial Vehicle Systems group. “We needed to account for that, and this standard does.”
Caron and other industry corrosion-conscious engineers initially believed that a standard on brake corrosion was needed but upon further investigation saw that the corrosion problem on commercial vehicles was more widespread.
One of the decisions made by the committee was that components should be designed with corrosion resistance that will protect against worst-case environmental conditions. And so the lab tests provided for under the standard represent worst-case, if not necessarily real-world, conditions.Caron said the next phase of the committee’s work will be to run sample corrosion coupons to “keep updating the correlation between what’s going on in the field with the lab results.”
This recommended practice does not address the chemistry of corrosion or methods of corrosion prevention. For information in these areas, SAE J447 is one source.
Corrosion on commercial vehicles has been getting worse over the past five to 10 years, according to Caron, and for many reasons. One is greater restrictions on the use of certain chemicals effective for corrosion resistance, such as hexavalent chromium, and greater use of certain chemicals by road departments to keep roads clear of snow and ice, such as magnesium chloride. “Magnesium chloride sticks to vehicles more than sodium chloride does,” he said.
Another possible contributing factor to increased corrosion is that some component suppliers try to save costs by paring back on corrosion coatings with the idea that the OEM customer can coat the part. “Unfortunately, the material gets corroded on the shipping dock before the OEM gets a hold of it,” Caron said.
And, aside from actual causes of increased corrosion, there is the issue of heightened expectation of customers regarding corrosion. “People are simply expecting things to last longer,” said Caron. “If you go back 20 years, we didn’t have brakes that could go to 500,000 miles. So, the perception is that corrosion is worse.”
Delivery options for SAE Technical Standards
• HandbookSupplements(HS)–Boundcollectionsoftechnologyrelatedstandardsandreports offered at less than the collective price of the individual standards in the collection.• JPaks-OnlineStandardsPlans–Acustomizablesubscriptionplanthatletsyoupayforjust the documents you need and use, full text search capabilities and an alert page keep you aware of changes and updates.• StandardsonCD-ROM–AnentireSAEstandardslibraryinamediumthatisfast,easytouse and remains current throughout the year.• Databasesandcustomizablecorporatesolutions.
For detailed information, visit http://www.sae.org/standards
6
SAE standard serves as basis for on-highway motorcycle sound legislationFrom SAE Update, November 2009
The American Motorcyclist Association (AMA) has developed model legislation for use by cities seeking a simple, consistent, and economical way to deal with sound complaints related to on-highway motorcycles within the larger context of excessive sound from all sources.
The model legislation offers an objective method for municipal jurisdictions to evaluate motorcycle sound through science-based measurement. It is based on SAE International’s new J2825 standard, “Measurement of Exhaust Sound Pressure Levels of Stationary On-Highway Motorcycles.” The AMA produced similar model legislation for off-highway motorcycles several years ago.
“Many cities and other jurisdictions already have excessive sound laws on the books, but when they get citizen complaints about loud motorcycles, they sometimes decide to single out the riding public with unfair or overly restrictive ordinances and laws,” said Imre Szauter, AMA Government Affairs Manager. “We believe that motorcycles shouldn’t be singled out, but should be regulated as part of a comprehensive sound management policy that also addresses cars, trucks, leaf blowers, generators, and other sources of excessive sound.”
The J2825 standard, issued by SAE’s Motorcycle Technical Steering Committee in May, is based on a comprehensive study of a wide variety of on-highway motorcycles. It establishes instrumentation, test site, test conditions, procedures, measurements, and sound level limits.
“Too many times, jurisdictions responding to citizen complaints about excessive motorcycle sound create laws that simply don’t work in the real world,” Szauter said. “They either set an unreasonable decibel limit, leave it up to a police officer to subjectively decide whether a bike is too noisy, or come up with another plan that is arbitrary or unworkable. Our model legislation is objective, workable, and fair.”
The model legislation adopts the SAE J2825 standard for stationary on-highway motorcycle sound testing, specifies the type of sound meter to be used, and allows for each city to specify the penalties for violating the law. Szauter stressed, however, that the sound-testing procedures and decibel limits established in the SAE J2825 standard should remain unchanged to ensure that the law remains objective and fair.
Under the SAE J2825 standard, decibel limits range from 92 dBA at idle for all motorcycles, to up to 100 dBA at certain rpm for various motorcycles, depending on the type of engine.
In 2003, the AMA organized the National Summit on Motorcycle Sound to bring together riders and user organizations, representatives of the motorcycle manufacturers, the aftermarket industry, racing promoters, government agencies, law enforcement, and others to develop proposals regarding the increasingly controversial issue of excessive motorcycle sound. The creation of a new on-highway motorcycle sound measurement procedure was a top recommendation of the summit’s Motorcycle Sound Working Group.
“The motorcycling community, local governments, and police officers have sought a practical sound field test for streetbikes for many years, and now it exists, thanks to a collaboration between the Motorcycle Industry Council and the SAE,” Szauter said. “The next step is for jurisdictions struggling with motorcycle sound complaints to adopt fair and objective laws, and the AMA is providing the tool for them to do that.”
Engineering Aids from SAE
SAE provides products that support testing procedures set forth in SAE standards, Recommended Practices, Information Reports, and other SAE documents including the OSCAR H-Point Machine, which is used in the design of seating and interior packages and in conjunction with SAE J 826 (rev. 1995), FMVSS regulations, and ISO standards—making it the required design and auditing tool for current production.
Also available is the newly designed HPM II H-Point Machine, which includes enhancements over the OSCAR H-Point machine for use in advance design applications.
Available at www.sae.org/servlets/otherProductList?PROD_TYP=EA
7
Gain a competitive advantage. Impact your bottom line. Invest in standards.Standards. The workhorse documents that commonize practices, processes, and products throughout the ground vehicle industry are also paramount to the advancement of technology. Standards documents are more than the practices of today. They account for history and anticipate the future of technology, regulation, and business. The direct benefits of standards are simple in concept but extraordinary in their global impact toward ever-safer, cleaner, more efficient worldwide transportation.
Technical standards enable and enhance:• consistentandclearexpectationsforproductperformanceandreliability• regulatorycompliance• consistentproductquality• compatibilityandinteroperability• moreefficientprocurement
Standardization also:• lowerstradebarriers• lowerspurchasingcosts• decreasesdesigntime• promotesinnovation• increasesnewtechnologyspeedtomarket
Because industry can rely on standards for globally harmonized solutions to common issues, individual companies can devote more time and resources to advance their proprietary technology. In this way, standards help foster competition, which advances the collective technology of industry and in turn, creates the need for new and revised standards. This has been the cycle for ground vehicle standards solutions.
And, at the heart of those solutions is SAE International, the recognized leader in mobility engineering for over 100 years. It plays the central role in developing North American automotive standards and a key role in bringing US documents to the global standards table, working hand-in-hand with the global community to advance industry.
While participation in the standards development process helps the advancement of the industry it can also contribute to the advancement of your company and personal career.
Corporate Benefits• Inputintothedirectionofthestandards• Competitiveintelligencethroughadvanceknowledgeofstandarddirection• Advancewarningofpendingregulationsandinfluenceoverthetechnicalbasisoftheregulation• Insightintothecompetitiveenvironment• Productliabilityprotections• Strongrelationshipswithcustomersandsuppliers• Associationwiththeleadingsocietyforadvancingmobilitytechnology
Individual Benefits• Professionaldevelopmentfromcontinuousworkingcontactwithpeers• Peerrecognitionforadvancingyourindustry’ssectorstechnologies• Excellentnetworkingandlearningopportunitiesfromproductdevelopers/usersaroundtheworld• Discoveremergingtechnologies• Contributetotheindustry’sbodyoftechnicalknowledge
To learn more about SAE Technical Standards Development—and for a schedule of Technical Committee meetings—visit us on the web at www.sae.org/standardsdev
Become a better you. Volunteer for an SAE Standards Development Committee.
8
Carlos Agudelo, Link Testing Laboratories IncPoul Andersen, Poul Andersen ConsultingDaniel W Arens, Baldwin Filters IncTed Armbruster, Worthington IndustriesRichard Batzer Lawrence C BibowDarko Brozovic, Usm Precision ProductsPeter J Byk Jack M Champaigne, Electronics IncMark Costin, General MotorsKevin Davis, Air-Way Manufacturing CorpErnest DeVincent, Getrag CorpPaul J Depinet, Denton ATD IncRandy L Dickerman, Chrysler Group LLCDaniel H Doughty, Battery Safety Consulting IncErnest G Dykeman, IntertekDarren Erickson, PACCAR IncCharles K Evans, Ford Motor CoJames D Fait, U-Haul IntlSteve Ferrero, EVONIK CYRO LLCPeter Filip, Southern Illinois Univ at CarbondaleDaniel Fritz DavidGamble,JohnDeere&CoRobert D Gillespie, Premier Shot CompanyC Greening Charles J GroellerThomas Haley, Vermeer CorporationJohn Hall, JCH Consulting CompanyThomas E Heck, Hayes Lemmerz Intl IncSiegfried Herliczek RyanHoover,IMMI(IndianaMills&MfgInc)Stein E Husher, KEVA EngineeringAnnett Irwin, General Motors LLCRichardWJob,RichardWJob&AssociatesDavid C Kelley, Subcarrier Systems CorpJohn R KinstlerGery Kissel, General Motors CorpRichard Edward Kuhlman, Afton Chemical CorpLee F Lackey, Noregon Systems IncRichard A Lanpheer Robert Larson, Exponent IncJames M Lawlis, Ford Motor Co
James W Lewis, Northrop Grumman Shipbldg Newport NewsMichael Lyons, Caterpillar IncGreg Lytle, Solvay Solexis IncThomas J Marhevko, National Marine Manufacturers AssocJoel Markowitz, Metropolitan Trans CommissionJames McGowan, TRW Vehicle Safety Systems IncJamesCMiller,Deere&CompanyLewis Miller, LBX Company LLCDanny Minikey, Gentex CorpNeil Mitchell, General Motors LLCLuis Moreiras Kin P Moy, Youngston State UniversityHiralal Patel, Parker Hannifin CorpJerome L Pfeifer Michael Piscitelli, Sapphire Technical Solutions LLC Dan Earl Richardson, Cummins IncNathan Roulson, Ford Motor CompanyGary L Rupp Lane Salins Daniel J Selke, Mercedes-Benz USA LLCJeffery D Smith, Vee EngineeringBrian Spahn, Ford Motor CoDouglas J Stein, Autoliv ASPJoseph Stratton, Leading Edge HydraulicsRuss Sweet George Szabo, Cooper Standard AutomotiveJames Szudy, Bendix Commercial Vehicle Systems LLCLaurie A Tessman, Timken Company (The)Robert Van Houten, Republic Engineered Products LLCMark WilkinsonEugene E Williams, Horton Fan Systems IncJerold A Yachetta, Truck-Lite Co IncMarkPZachos,DearbornGroupInc
Volunteer recognition: Document Sponsors (Aug 2009 - Jan 2010)The SAE Standards Development Program thanks its Document Sponsors. These individuals have served not only as active committee members but have dedicated their time and talent in guiding the development of standards documents from the preparation of all drafts through balloting and publication.
9
Allison Transmission AM General LLC American Honda Motor Company Inc American Trucking Associations Applied Process Inc Arctic Cat Inc Association of Equipment Manufacturers Bendix Commercial Vehicle Systems LLC BorgWarner Inc BRP US Inc. Cequent Chrysler Group LLC CM Automotive Systems Inc Coleman Cable Inc. Compact Power Inc DENSO International America Inc Delphi CorporationDura Automotive Systems Inc East Penn Manufacturing Company Electric Power Research Institute Electronics Inc Elite Electronic Engineering Inc EVM Incorporated
Ford Motor Company General Motors LLC Haltermann Products Hoffman Engineering CorporationInternationalTruck&EngineCorporationL E Jones Co Magna International Inc MTG Moltec Nissan Motor Co Ltd Nxtgen Emission Controls Inc Peening Technologies Pierce Manufacturing Inc Powertech Labs Inc SnowmobileSafety&CertificationCommitteeTest Engineering Inc TI Automotive Timken Company Toyota Boshoku CorporationToyota Motor CorporationVector CANtech Inc Weldon Technologies Inc Yamaha Motor Corporation USA
Acknowledgement: 2009 Corporate SupportSAE International wishes to acknowledge those companies who contributed to the funding of the 2009 SAE Standards Development Program. Thank you for helping write the future of the ground vehicle industry.
Since 1905, SAE International has been providing the common engineering requirements for new mobility products, advanced technologies, and applications. It is uniquely positioned to provide innovative standards solutions to the global on- and off-road industries and their engineering challenges.
For automotive vehicles, SAE plays the central role in developing essential North American emissions and safety standards to meet some of the most stringent regulations in the world. Through ISO, it plays a key role in bringing standards for and from the United States market to the global table. As the center of expertise on Commercial Vehicle/ConAgg standards development, many of its standards are adopted by ANSI and ISO.
SAE offers a full suite of standards capabilities—committee management, consensus-based standards development, consortium administration, cooperative research, and database development—providing industry, companies, and individuals with extensive opportunities to participate, infl uence, grow, and prosper.
For On- and Off-Road Harmonized Standards Solutions, All Roads Lead to SAE
www.sae.org071608
10
Standards Consortium Administration
With over a century of experience providing the common engineering requirements for new mobility vehicles, SAE can be a key component in developing any consortium-based activity, providing the expertise and worldwide technological and human resources to help you turn your vision into a successful operating reality.
Each client maintains its desired degree of autonomy, flexibility, and control. Client/project-tailored services include:
• Alegalframework• Fiscaloversight• Policyandproceduredevelopment• Publishinganddistributionservices• Marketingandpublicrelationsactivities
Volunteer spotlight: SAE AwardsSAE/InterRegs Standards and Regulations Award for Young Engineers This award annually recognizes a practicing engineer under the age of 40 who is involved in standards, regulations or conformity assessment systems which improved safety or reduced emissions in a ground vehicle mobility product. It was established by InterRegs and the SAE Foundation as a way to reward participation in standards and regulations by young engineers.
2010 Recipient Praveen Anumolu, Northrop Grumman Corp.
2009 Recipient David L. Hung, Visteon Corp.
Technical Standards Board Outstanding Contribution Award This award recognizes individuals for outstanding service in the technical committee activities of the Society. This includes valuable contributions to the work of SAE technical committees, unusual leadership in the activities of an SAE technical committee, significant contributions as a representative of the Society to the accomplishments of technical committees of other organizations or of government agencies, and outstanding contributions to SAE technical committee work in the form of research, test methods and procedures, and/or development of standards. It is administered by the SAE Technical Standards Board.
2009 RecipientsRhonda L. Brender, Delphi Corp., Motor Vehicle Council
Dr. Mark Costin, General Motors, Motor Vehicle Council
Gregory V. Gillham,DetroitDieselCorp.,Truck&BusCouncil
Dewey Paul Szemenyei,AftonChemicalCorp.,Fuels&LubricantsCouncil
James Szudy,BendixCommercialVehicleSystemsLLC,Truck&BusCouncil
Steve Blanchard,Caterpillar(retired),ConstructionAgricultural&Off-RoadMachineryCouncil
Certificates of Appreciation • fromtheConstruction,Agricultural,&Off-RoadMachineryCounciltoRon Crawford, Stan Lew, and Rick Weires for their devoted work to the standards committees• fromtheTruck&BusCounciltoRich Kempf for his devoted work to and past chairmanship of the standards committees
11
Standards Hot Spot located in the technology lounges at SAE 2010 World Congress
New to the SAE 2010 World Congress insert htperlink www.sae.org/congress/ are the Technology Lounges, technology-focused lounges focusing on Safety and Testing; Powertrain Fuels and Lubricants, Emissions, and Environment; and Electronics, Integrated Design for Manufacturing, Materials, and Sustainability. Open to all attendees throughout the day, located near session rooms, and intended to create an informal gathering
and networking space for those with common interests, the lounges will also house “Chats with the Experts” discussion groups and the “Standards Hot Spot.”
The Standards Hot Spot is where SAE standards committee members and prospective committee participants can meet informally with colleagues—SAE volunteers who create standards for the industry—and the SAE staff team who can help you learn more about Standards Technical Committees. Open April 13-15, Tuesday through Thursday from 7:30 a.m. to 5:30 p.m., the Standards Hot Spot Lounge will offer standards writing committees and guests refreshments, SAE materials, information, and staff support.
Approximately 60 SAE standards technical committees will meet during Congress (April 13-15, Cobo Center, Detroit MI, USA) including the Motor Vehicle Council which is made up of Chassis, electrical, Powertrain, Vehicle engineering and Vehicle safety, as well as Materials committees. Visit the www.sae.org/congress/ for a complete list of committee meetings that will take place during Congress week.
Call for volunteersExperts in vehicle service, towing & collision repair soughtThe Service Development Steering committee is seeking experts in service engineering, vehicle towing and collision repair to identify the need for and develop new Standards and Recommended Practices that will reduce the cost and difficulty of diagnosing, servicing, maintaining and repairing the new technologies emerging on light highway vehicles.
The Service Development Steering Committee is responsible for developing and maintaining SAE Standards, Recommended Practices, and Information Reports related to the maintenance and repair of current and future highway vehicles. The scope of our committee currently focuses on three areas: service, vehicle towing and collision repair.
Contact: Cindy Reese at [email protected]
Candidates sought for cellular task forceThe task force is seeking candidates to fill roles for members and liaison committees.
Participants will shape the development of standards for global testing procedures, environmental, operational specifications and best practices around the design, integration and installation of embedded modules in ground based vehicles.
“Members” will contribute to the work of the technical committee, vote on all technical report ballots in a timely manner, and maintain active participation on a respective technical committee. Membership on a technical committee requires chairman approval. “Liaisons” will provide coordination with parallel activities occurring in the government, other agencies and related SAE technical committees. Liaisons receive technical report ballots and may provide comments; however, their approval or disapproval is not tabulated in the approval requirements.
Contact: Committee Chairman, Allan Breitmayer at [email protected] on page 12
12
Those with bar-coding knowledge neededJ1877-Recommende Practice for Bar-Coded Vehicle Identification Number Label, issued by the VIN-WMI Technical committee, is in need of immediate review.
This SAE Recommended Practice describes the basic content requirements, bar-code specifications, and functional test specification of the vehicle identification number (VIN) label. On the vehicle, the VIN label is to be mounted in a readily accessible location bar-code scanning. This document specifies a permanent label for the standard vehicle identification number that can be automatically identified through a bar-coded format.
Contact: Micheline Brussow at [email protected]
New active-safety committee formedUnder the direction of the SAE Motor Vehicle Council, a new group called the Active Safety Committee has been formed. It is responsible for developing and maintaining SAE standards, recommended practices, and information reports related to the design, operation, and evaluation of vehicular active safety systems features. The committee will cooperate, provide inputs, and be a liaison with committees from other councils and groups (i.e., International Standards Organization).
Contact: Nikki Ameredes at [email protected]
Assistance needed with revision of Hydraulic Committee documentsThe Hydraulics Committee of the Construction, Agriculture, and Off-Road Machinery (ConAg)Council is looking for experts who can assist with the revision of the following documents:
J1117—Method of Measuring and Reporting the Pressure Differential-Flow Characteristics of a Hydraulic Fluid Power Valve J1165—Reporting Cleanliness Levels of Hydraulic Fluids J1176—External Leakage Classifications for Hydraulic Systems J1227—Assessing Cleanliness of Hydraulic Fluid Power Components and Systems J1235—Measuring and Reporting the Internal Leakage of a Hydraulic Fluid Power Valve J1276—Standardized Fluid for Hydraulic Component Tests J1277—Method for Assessing the Cleanliness Level of New Hydraulic Fluid J1333—Hydraulic Cylinder Rod Corrosion Test J1334—Hydraulic Cylinder Integrity TestJ1335—Hydraulic Cylinder No-Load Friction TestJ1336—Hydraulic Cylinder Leakage TestJ1374—Hydraulic Cylinder Rod Seal Endurance Test Procedure J1447—Fire-Resistant Fluid Usage in Hydraulic Systems of Off-Road Work Machines J1614—Wiring Distribution Systems for Construction, Agricultural, and Off-Road Work Machines J214—Hydraulic Cylinder Test Procedure [Combined with J1334]J744—HydraulicPumpandMotorMounting&DriveDimensionsJ745—Hydraulic Power Pump Test Procedure J746—Hydraulic Motor Test Procedures J747—Control Valve Test Procedure J748—Hydraulic Directional Control Valves, 3000 Psi Maximum J931—Hydraulic Power Circuit Filtration.
Contact: Cindy Reese at [email protected]
Continued from page 11
13
What’s new? Who’s new?Chairs and Vice Chairs
Mike Lyons, Chair – Truck and Bus Control and Communications Network CommitteeGreg Kreczko, Chair – Truck and Bus Air Brake Tubing and Tube Fitting CommitteeTy Lasky, Vice Chair – Truck and Bus Event Data Recorder CommitteeBill Johnson, Chair – Operator Protection Advisory GroupTroy Bateman, Chair – Operator Protection – Braking CommitteeWalt Ross, Chair – Operator Protection – Lighting Committee
Chassis Systems Group Task ForceAftermarket Wheel Test Certification Conformance Task Force
Documents in progress Truck and Bus Council
J1939-14 - Physical Layer, 500K bits/s – Truck and BusJ2848-2 - Tire Pressure Systems - Maintenance Type for Medium and Heavy Duty Highway VehiclesJ2891 - Auxiliary Power Unit Electrical Interface Requirements for Class Eight TrucksJ2898 - Hydraulic Hybrid Vehicle TerminologyJ2899 - Maximum Readjustment Strokes for Air Brake ActuatorsJ2902 - Air Disc Brake Actuator Test Procedure, Truck-Tractor, Bus and TrailerJ2910 - Design and Test of Hybrid Electric Trucks and Buses for Electrical SafetyJ2917 - Occupant Restraint and Equipment Mounting Integrity – Frontal Impact System-Level Ambulance Patient CompartmentJ2918 - Engine-Off Cab Heating and Air Conditioning Systems Test Procedure and Performance Requirements— Trucks with and Without SleepersJ2932 – Air Disc Brake Actuator Test Requirements
Chassis Systems GroupJ2879 - Automotive Hydraulic Brake System - Metric Hydraulic Tube Connections for Inverted FlaresJ2909 – Light Vehicle Stopping DistanceJ2923 - Brake Drag Measurement Test Procedure for Vehicles Below 4 540 kg GVWRJ2928 - Rotor/Drum Crack and Strength Dynamometer Test ProcedureJ2933 - Verification of brake rotor modal frequenciesJ3001 - Brake Shim Damping ProcedureJ3002 - Dynamometer Low-Frequency Brake Noise Test Procedure
ConAg CouncilJ2895 - Requirements for LED “White” Lighting Assemblies Used on Construction and Industrial Machinery
Service Development Steering CommitteeJ2892 - Graphics-Based Service Documentation
Upcoming Standards Technical Committee Meetings
A current schedule can be found on the SAE website.
www.sae.org/standardsdev/
Gro
und
Veh
icle
Sta
ndar
ds C
omm
ittee
s 3/23
/09
.
Com
mon
Tes
ts T
echn
ical
Ste
erin
g C
mte
H
ydra
ulic
s El
ectri
cal C
ompo
nent
s C
old
Wea
ther
Ope
ratio
ns
Hum
an F
acto
rs T
echn
ical
Adv
isor
y G
rp
Mac
hine
Con
trols
– O
pera
tor
Mac
hine
Dis
play
s and
Sym
bols
O
pera
tor S
eatin
g an
d R
ide
O
pera
tor A
ccom
mod
atio
n
Mac
hine
Tec
hnic
al S
teer
ing
Cm
te
Load
ers,
Cra
wle
rs, S
crap
ers &
A
ttach
men
ts
Swee
per,
Cle
aner
& M
achi
nery
Indu
stria
l Equ
ipm
ent
Fore
stry
& L
oggi
ng E
quip
men
t Ex
cava
tors
R
oadb
uild
ing
Mac
hine
ry
Tire
& R
im
Tren
chin
g &
Bor
ing
O
pera
tor P
rote
ctio
n Te
ch A
dvis
ory
Grp
Pe
rson
al P
rote
ctio
n (G
ener
al)
Bra
king
Li
ghtin
g an
d M
arki
ng
Prot
ectiv
e St
ruct
ures
So
und
Leve
l Tec
hnic
al S
teer
ing
Cm
te
Ear
th M
ovin
g M
achi
nery
Sou
nd L
evel
B
ack-
up a
nd F
orw
ard
War
ning
Ala
rms
Con
stru
ctio
n, A
gric
ultu
ral &
O
ff-R
oad
Mac
hine
ryC
ounc
ilPe
rson
al W
ater
craf
t Sm
all E
ngin
e &
Pow
ered
Equ
ip
Snow
mob
ile
Spec
ial P
urpo
se V
ehic
le
Mot
orcy
cle
Tech
nica
l Ste
erin
g C
mte
M
otor
cycl
e So
und
M
arin
e Te
chni
cal S
teer
ing
Cmte
M
arin
e En
gine
Fue
l Sys
tem
s M
arin
e El
ectri
cal S
yste
ms
Trai
ler
Goo
sene
ck &
Fift
h W
heel
Tr
aile
r Dyn
amic
s C
onve
ntio
nal T
owin
g to
20,
000
lbs
Trai
ler T
erm
inol
ogy
Ship
Sys
tem
s & E
quip
Ste
erin
g C
mte
Fl
uid
Syst
ems &
Com
pone
nts
Fast
ener
sSy
stem
Cle
anlin
ess a
nd F
ilter
Spec
ializ
ed V
ehic
le &
Eq
uipm
ent C
ounc
ilA
utom
otiv
e C
orro
sion
& P
reve
ntio
n
Aco
ustic
al M
ater
ials
Fast
ener
sM
etal
s Tec
hnic
al E
xecu
tive
Stee
ring
Cm
te
C
arbo
n &
Allo
y St
eels
Met
als T
est P
roce
dure
s
Aut
omot
ive
Iron
& S
teel
Cas
tings
Shee
t & S
trip
Stee
l
Elev
Tep
Pro
p of
Fer
rous
Met
als
Aut
omot
ive
Adh
esiv
es &
Sea
lant
s Pl
astic
sSp
line
B92
Sp
ring
Stee
ring
Cm
te
C
oil S
prin
g
Le
af S
prin
g
Pn
eum
atic
Spr
ing
Tors
ion
Bar
Spr
ing
& S
tabi
lizer
Bar
s Te
xtile
& F
lexi
ble
Plas
tics /
IFA
I V
ibra
tion
Con
trol
Flui
d Co
nduc
tors
Con
nect
ors S
teer
ing
Cm
te
C1 H
ydra
ulic
Tub
e Fi
tting
s
C2 H
ydra
ulic
Hos
e &
Hos
e Fi
tting
s
C3 T
rain
ing
& E
duca
tion
C5 M
etal
lic T
ubin
g
Cm
te o
n A
utom
otiv
e R
ubbe
r Spe
cs
Non
-Hyd
raul
ic H
ose
Hos
e/C
lam
p Pe
rfor
man
ce &
Com
patib
ility
Fa
tigue
Des
ign
& E
val A
dviso
ry G
roup
Surf
ace
Enha
ncem
ent
M
ater
ial P
rope
rties
Stru
ctur
al A
naly
sis
Fa
tigue
Life
time
Pred
ictio
ns
R
oad
Load
Dat
a A
cqui
sitio
n
C
ompo
nent
Tes
ting
& S
imul
atio
n
Sque
ak a
nd It
ch C
ompa
tibili
ty T
ask
Forc
e G
roun
d V
ehic
le R
elia
bilit
y
Mat
eria
ls, P
roce
sses
& P
arts
C
ounc
ilA
dvan
ced
& H
ybrid
Pow
ertra
in A
dvis
ory
Grp
Alte
rnat
ive
Fuel
s
Axl
e
C
lutc
h, T
rans
mis
sion
& P
ower
Tak
e-O
ff
En
gine
s
Hyb
rid a
nd E
lect
ric V
ehic
le
H
ybrid
Ele
ctrif
ied
Acc
esso
ries
H
ybrid
Com
m N
etw
ork
for P
ower
Mgm
t
Hyb
rid S
afet
y
H
ybrid
Ene
rgy
Stor
age
Hyd
raul
ic H
ybrid
s B
ody
& O
ccup
ant E
nviro
nmen
t Adv
isor
y G
rp
Tr
uck
Cras
hwor
thin
ess
Win
dshi
eld
Wip
ers &
Clim
ate
Con
trol
Hum
an F
acto
rs
Elec
trica
l/Ele
ctro
nic
Adv
isor
y G
roup
Low
Spe
ed C
omm
unic
atio
ns N
etw
ork
Con
trol a
nd C
omm
unic
atio
ns N
etw
ork
Even
t Dat
a R
ecor
der
Elec
trica
l Sys
tem
s B
rake
and
Sta
bilit
y C
ontro
l Adv
isory
Gro
up
Fo
unda
tion
Bra
ke
B
rake
Act
uato
r
Bra
ke S
yste
ms
El
ectro
nica
lly C
ontro
lled
Brak
e Sy
stem
s
Bra
ke S
uppl
y an
d C
ontro
l
Hyd
raul
ic B
rake
Whe
el
St
abili
ty C
ontro
l Sys
tem
s
Air
Brak
e Tu
bing
& T
ube
Fitti
ngs
Tota
l Veh
icle
Adv
isor
y G
roup
Tire
Pre
ssur
e M
anag
emen
t Sys
tem
s
Corr
osio
n
V
ehic
le C
hara
cter
izat
ion
Coup
ling
& In
terc
hang
eabi
lity
Noi
se, V
ibra
tion
and
Har
shne
ss (N
VH
)
Aer
odyn
amic
s/Fu
el E
cono
my
Tire
Mot
or V
ehic
le C
ounc
ilTr
uck
& B
us C
ounc
il
Cha
ssis
Syst
ems G
roup
B
rake
For
um S
teer
ing
Cm
te
Bra
ke L
inin
gs S
tand
ards
D
ynam
omet
er T
est C
ode
Stan
dard
s R
oad
Test
Pro
cedu
res S
tand
ards
B
rake
NV
H S
tand
ards
H
ighw
ay T
ire F
orum
Ste
erin
g C
mte
V
ehic
le D
ynam
ics S
tand
ards
W
heel
Sta
ndar
dsH
ydra
ulic
Bra
ke A
ctua
ting
Foru
m A
dviso
ry G
rp
B
rake
Flu
ids S
tand
ards
Aut
omot
ive
Bra
ke &
Ste
erin
g H
ose
Hyd
raul
ic B
rake
Com
pone
nts
Pow
erSt
eerin
g Pu
mp
Noi
seSt
eerin
gC
mte
Veh
icle
Eng
inee
ring
Sys
tem
s C
omfo
rt &
Con
veni
ence
A
dapt
ive
Dev
ices
A
dvan
ced
Trav
eler
Info
rmat
ion
Syst
ems
Con
trols
& D
ispl
ays
Coo
ling
Syst
ems
Ded
icat
ed S
hort
Ran
ge C
omm
unic
atio
ns
Hum
an A
ccom
mod
atio
ns D
esig
n D
evic
es
Inte
rior C
limat
e C
ontro
l So
und
Sign
alin
g A
dvis
ory
Gro
up
Spee
dom
eter
& O
dom
eter
V
olat
ile O
rgan
ic C
ompo
unds
Ex
teri
or a
nd P
erfo
rman
ce
Gla
zing
Mat
eria
ls
Ligh
t Dut
y V
ehic
le P
erfo
rman
ce &
Eco
nom
y
M
easu
rem
ents
Li
ght V
ehic
le E
xter
ior S
ound
Li
ghtin
g Co
ordi
natin
g A
dviso
ry G
roup
H
eavy
Dut
y Li
ghtin
g St
anda
rds
Roa
d Ill
umin
atio
n D
evic
es S
tand
ards
Si
gnal
ing
and
Mar
king
Dev
ices
Sta
ndar
ds
Test
Met
hods
and
Equ
ipm
ent S
tand
ards
Em
erge
ncy
War
ning
Lig
hts a
nd D
evic
es
Ligh
ting
Mat
eria
ls S
tand
ards
In
tern
atio
nal L
ight
ing
Adv
isory
Gro
up
Ligh
ting
Stan
dard
Pra
ctic
es
Inte
rnat
iona
l Coo
pera
tion
R
oad
Veh
icle
Aer
odyn
amic
s To
w V
ehic
le T
raile
r Rat
ing
W
IN/W
MI
Wip
erSt
anda
rds
Pow
ertr
ain
Syst
ems G
roup
A
ir C
lean
er T
est C
ode
Stan
dard
s A
ll W
heel
Driv
etra
in S
tand
ards
A
utom
atic
Tra
nsm
issi
on F
rictio
n
Aut
omat
ic T
rans
mis
sion
Tra
nsax
le
Clu
tch
Stan
dard
s C
VT
Tran
smis
sion
s D
iese
l Exh
aust
Afte
rtrea
tmen
t D
iese
l Fue
l Inj
ectio
n Eq
uipm
ent
Driv
elin
e
Engi
ne P
ower
Tes
t Cod
e
Filte
r Tes
t Met
hods
Fu
el S
yste
ms
Gas
olin
e Fu
el In
ject
ion
H
ybrid
Bat
tery
Abu
se
E
mis
sion
s
Elec
tric
Mot
or R
atin
g
C
onne
ctor
Com
mun
icat
ions
Ig
nitio
n Sy
stem
s Le
v II
Fill
er P
ipe
Ass
embl
y
Man
ual T
rans
mis
sion
Tra
nsax
le
Perm
eatio
n Pi
ston
Rin
g Po
wer
Tes
t Cod
e
Tran
smis
sion
Axl
eD
rivel
ine
Coo
pera
tive
Res
earc
h Pr
ojec
ts
Alte
rnat
ive
Ref
riger
ants
Hig
h St
rain
Rat
e Pl
astic
s C
RP1
234y
f Alt
Ref
riger
ant A
sses
smen
t
IMA
C C
RP1
50 L
ow G
WP
Alt
Ref
riger
ants
Ass
essm
ent
ITS
Proj
ects
G
age
R&
R o
f HPM
Oto
lotic
Tra
uma
H
igh
Tem
pera
ture
Bat
tery
Stu
dy
CA
ESA
R
Emer
genc
y V
ehic
le L
ight
ing
Ergo
nom
ics
Truc
k C
ab A
nthr
opom
etric
Stu
dy
V
ehic
le S
ound
Lev
el fo
r Ped
estri
ans
H
2Fu
el C
ell S
tatio
n B
reak
away
s, H
oses
, Fitt
ings
and
Noz
zles
Pl
astic
s Sui
tabl
e fo
r use
with
H2
Stan
dard
s Der
ivat
ive
Prog
ram
sH
orse
pow
er C
ertif
icat
ion
H
-Poi
nt M
achi
nes
J274
6 So
ftwar
e A
sses
smen
t Rep
osito
ry
W
MI/V
IN
On
Boa
rd D
iagn
ostic
s Dat
abas
es
WM
C/P
IN
Veh
icle
Saf
ety
Syst
ems
Acc
iden
t Inv
estig
atio
n &
Rec
onstr
uctio
n
Driv
er V
isio
n
Res
train
ts S
yste
m S
tand
ards
Ste
erin
g
Chi
ld R
estra
ints
B
elt S
yste
ms
Infla
tabl
e R
estra
ints
Sa
fety
Sys
tem
s Com
pone
nts A
dvis
ory
Gro
up
Hum
an B
iom
echa
nics
& S
imul
atio
n
Ste
erin
g C
mte
Dum
my
Test
ing
& E
quip
Dum
my
Dev
Eva
l Adv
isor
y G
roup
Impa
ct &
Rol
love
r Tes
t Pro
cedu
res
S
afet
y Te
st In
stru
men
tatio
n
Safe
ty &
Hum
an F
acto
rs S
teer
ing
Cm
te
Veh
icle
Sou
nd fo
r Ped
estri
ans (
VSP
)
Elec
tric
al S
yste
ms G
roup
A
utom
otiv
e El
ectro
nic
Syst
ems R
elia
bilit
y
Circ
uit P
rote
ctio
n &
Sw
itch
Dev
ices
El
ectri
cal D
istri
butio
n Sy
stem
s El
ectro
mag
netic
Com
patib
ility
(EM
C)
Elec
troni
c D
esig
n A
utom
atio
n
Embe
dded
Sof
twar
e
Star
ter M
otor
St
orag
e B
atte
ry
Veh
icle
Arc
hite
ctur
e fo
r Dat
a C
omm
unic
atio
ns
Veh
icle
E/E
Sys
tem
s Dia
gnos
tic
Veh
icle
Ele
ctric
Pow
er S
uppl
y
Veh
icul
ar F
lat P
anel
Dis
play
V
ehic
le E
vent
Dat
a In
terf
ace
Fuel
Cel
ls St
anda
rds C
mte
Em
issi
ons
P
erfo
rman
ce
In
terf
ace
Sa
fety
Aut
omot
ive
Qua
lity
& P
roce
ss
Impr
ovem
ent C
omm
ittee
Fuel
s & L
ubri
cant
s Cou
ncil
Tech
nica
l Com
mitt
ee 1
– E
ngin
e Lu
bric
atio
n Te
chni
cal C
omm
ittee
3 –
Driv
elin
e &
Cha
ssis
Lub
ricat
ion
Tech
nica
l Com
mitt
ee 7
- Fu
els
Tech
nica
l Com
mitt
ee 8
– A
viat
ion
Pist
on F
uels
and
Lub
rican
ts
Indu
stria
l Lub
rican
ts
Nik
ki A
mer
edes
– n
amer
edes
@sa
e.or
g Ja
ck P
okrz
ywa
– ja
ckp@
sae.
org
Serv
ice
Dev
elop
men
t Tec
hnic
al
Stee
ring
Com
mitt
ee
Serv
ice
Col
lisio
n
Tow
abili
ty
Gra
phic
s Bas
ed S
ervi
ce In
fo
Patri
cia
Ebej
er –
peb
ejer
@sa
e.or
g
Car
olin
e M
icha
els -
car
olin
emic
hael
s@sa
e.or
g
Deb
bie
Bro
oks –
bro
ok@
sae.
org
Gar
y Po
llak
- gar
y@sa
e.or
g
Mic
helin
e B
russ
ow -
mbr
usso
w@
sae.
org
Jana
Wrig
ht –
jwrig
ht@
sae.
org
Cin
dy R
eese
– c
rees
e@sa
e.or
g
Kris
Sid
dall
– ks
idda
ll@sa
e.or
g
Jill
Kqi
raj –
gjy
sta@
sae.
org
Con
tact
Info
rmat
ion:
SA
E In
tern
atio
nal
(248
) 273
-245
5 w
ww
.sae.
org
Gro
und
Vehi
cle
Sta
ndar
ds C
omm
ittee
s &
Sta
ff C
onta
cts
Mat
ch y
our e
xper
tise
with
the
man
y SA
E Te
chni
cal S
tand
ards
Dev
elop
men
t Com
mitt
ees
ha
t are
writ
ing
the
com
mon
eng
inee
ring
requ
irem
ents
for t
he a
dvan
cem
ent o
f the
gro
und
vehi
cle
indu
stry
.