ground support products - pt nusantara sangga bumi · ground support products and accessories for...
TRANSCRIPT
![Page 1: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/1.jpg)
A comprehensive range of ground support products and accessories for the international and domestic mining sectors.
A Division of Fero Group
Ground Support Products
![Page 2: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/2.jpg)
www.fero.com.au
Fero Group is a leading provider of steel products and anti-corrosion services to the underground mining,construction and infrastructure sectors. A dynamic, innovative and customer-focused company and we pride ourselves on our ability to respond to the needs of our clients.With 38 years’ of experience in the industry we know that quality and value are important to our customers. Stringent internal quality control procedures and inspections demand the highest standard of product and our highly skilled and experienced technical experts work to deliver complete customer satisfaction and personalised solutions.
Fero also provide the advantage of a single supply chain through integrated specialised steel manufacturing and anti-corrosion service divisions. The ability to manufacture, hot-dip galvanise and provide stock inventory from packing to despatch, all under one roof, not only reduces cost, it reduces the often critical factor of turn-around times.Fero is committed to superior customer service, the highest quality products and workmanship and time and cost advantages.
![Page 3: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/3.jpg)
Contents
1.0 ROCK BOLTS
1.1 Friction Stabilisers 3 1.2 Wriggle Bolts 11 1.3 Threaded Bar (Solid Bolts) 19 1.4 Cable Bolts 27
2.0 SURFACE SUPPORT
2.1 Strata Support Plates 35 2.2 Strata Mesh 43
3.0 CHEMICALS
3.2 Grouts 51 3.3 Shotcrete Admixtures 57
4.0 ACCESSORIES 63
www.fero.com.au
Corporate Office & Manufacturing Facility WESTERN AUSTRALIA44 Chisholm Crescent Kewdale WA 6105Tel: +618 9453 0000 Fax: +618 9453 0050
Manufacturing Facility QUEENSLAND9 Boron Street Narangba QLD 4504Tel: +617 3888 4533 Fax: +617 3888 4790
Branch Locations AUSTRALIAKalgoorlie WABurnie TASBendigo VICMount Isa QLDTownsville QLD
For further information and ordering contact: [email protected]
1
![Page 4: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/4.jpg)
2
www.fero.com.au
![Page 5: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/5.jpg)
Friction stabilisers provide instant ground support and offer the advantage of a single pass installation.
A Division of Fero Group
1.1 Friction Stabilisers
![Page 6: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/6.jpg)
4 www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
Friction stabilisers are made from high tensile steel that is roll-formed into a tubular section containing a continuous longitudinal opening along the length of the tube. A steel ring is fixed to the collar end of the tube and when the stabiliser is installed onto the stabiliser plate it establishes a compressive force against the rock. The ring-in combination with a pull collar also enables load testing once the bolt has been installed. The tapered end of the friction stabiliser enables easy insertion into the drilled hole. Friction stabilisers can also be manufactured with no taper for installation direct into paste.
The compression of the tubular shape of the bolt into a slightly smaller diameter hole generates a load transfer from the steel to the rock. The tubular shape of the bolt enables increased contact of the steel against the rock generating radial pressure and creating frictional resistance to the pull-out load of the tube from the hole.
When additional load bearing capacity is required, friction stabilisers can be grouted.
Once installed load pull-out capacity can be tested as required by attaching a pull collar to the steel ring fixed to the collar end of the friction stabiliser and measuring with a pull testing unit. Friction stabiliser bolts can be installed with either hand held or mechanised equipment such as Jumbos.
Fero friction stabilisers are manufactured to exceed Australia’s high quality standards and are quality tested in-house and in-situ. Contact the Fero Strata technical services team for technical and product advice, operator training and in-situ-testing.
Contact the Fero Strata team for more information at [email protected]
1.1 Features
Provide instant ground support
Single pass installation
Made from high tensile steel
Able to be tested in situ
Available in hot dip galvanised or untreated steel
Available in a range of sizes
1.0 Friction Stabilisers Friction stabilisers have been used by the metaliferous mining and tunneling industry for decades and are considered the simplest and most cost effective form of ground support
Ring end
Taper end
A range of accessories available
![Page 7: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/7.jpg)
5www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
1.2 Friction Stabiliser Range
Fero Strata friction stabilisers are manufactured in 33, 39 and 47mm diameters and various lengths. Lengths typically range from 600mm to 3000mm in 300mm increments. Other lengths and customised product to suit specific requirements are available on request. Fero friction stabilisers are available in galvanised or untreated steel in packs of 150 or 300 for 33mm stabilisers.
33mm Stabiliser The 33mm friction stabiliser is primarily used to establish ground support when hand-held mining operations (Air Leg mining) are required.
39mm Stabiliser A 39mm stabiliser is primarily used for securing strata mesh by installing into existing 47mm Friction Stabiliser in conjunction with a smaller plate. Longer lengths are also used as primary ground support when drilling smaller diameter holes.
47mm Stabiliser The 47mm friction stabiliser is used as a primary support in mechanised jumbo development and production mining.
![Page 8: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/8.jpg)
6 www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
FS33 Minimum
FS33 Typical
FS39 Minimum
FS39 Typical
FS40 Minimum
FS40 Typical
FS45 Minimum
FS45 Typical
FS47 Minimum
FS47 Typical
Physical Properties
Stabiliser Diameter (mm) - 33 - 39 40 - 45 - 47
Steel Thickness (mm) - 2.3 - 2.3 - 3.2 - 3.2
Mass per metre (kg) - 1.53 - 1.75 - 2.4 - 2.74 - 2.74
Installation Details
Hole Diameter Range (mm) - 29-31 - 35-38 - 41-43 - 43-45
Mechanical Properties
Yield Strength (MPa) 415 510 415 510 350 460 350 450 350 450
Yield Force (Metric Tonne) 8.5 10.4 9.3 11.4 9.7 13.0 12.3 15.8 12.3 15.8
Ultimate Tensile Strength (MPa) 510 600 510 600 430 520 460 520 460 520
Ultimate Tensile Force (Metric Tonne) 10.4 12.2 11.4 13.4 11.9 15.8 16.1 18.2 16.1 18.2
Cross sectional area (mm2) - 204 - 223 - - 350 - 350
Elongation on 80mm sample (%) 16 - 16 - 20 - 20 - 20 -
Testing Standards
Material
Galvanising
Welding
2.0 Physical & Technical Properties
3.0 Associated Accessories
Fero Strata manufactures and supplies a comprehensive range of accessories for use with friction stabilisers. It is recommended that friction stabilisers be used with associated Fero Strata products.
For more detailed information contact the Fero Strata technical services team to ask for a Fero Accessories brochure.
Email: [email protected]
AS1594/AS2505/AS1391/AS1365
AS4680
AS1554 Part 1 2004
![Page 9: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/9.jpg)
7www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
3.1 Stabiliser Plates
Fero manufactures a range of stabiliser and duplex plates for use with friction stabilisers, wriggle bolts and cable bolts.
Fero Strata stabiliser plates are designed in-house and quality tested to a high-load capacity to provide optimal surface support in a range of ground conditions. Fero stabiliser plates are available to suit any bolt type and diameter in the Fero range. Strata plates most typically used with friction stabilisers are:
125 or 150 Stabiliser Plate A general purpose plate, both the 125 and 150 stabiliser plates are manufactured from 4mm material to suit 33mm and 39mm friction stabilisers; and can be used with a 47mm friction stabiliser. The dome assists in stabiliser alignment and provides additional strength. The hanger lug provides support of service products.
300 Duplex Stabiliser Plate The duplex plate is a 4mm thick 125 or 150 stabiliser plate welded to a 1.9mm thick 300 x 280mm strata plate, the pressed rib sections in the 1.9mm material provide additional strength and minimise deformation upon installation. The Duplex plate gives greater surface coverage when supporting strata-mesh or when used directly on rock surface. User friendly round edges for increased safety and mesh protection.
200 or 225 Stabiliser Plate A specialised plate, the 200 and 225 stabiliser plate is also manufactured from 4mm material. The 225 stabiliser plate was developed as a cost saving alternative to the duplex plate. The 225 plate provides slightly less surface coverage than the duplex plate. However, as it is made entirely from 4mm material, it provides higher grade coverage over a larger surface area than the larger 1.9mm material area of the duplex plate.
The plate is designed to deform during the installation process to prevent damage to strata- mesh and to minimise point loading of the ring. The 200 or 225 plate is typically used with 47 mm stabiliser but can also be used with 33mm and 39mm friction stabiliser. Dual hanger lugs provide extra versatility for support of service products.
300 Strata Plate This lighter gauge 1.9mm plate is used when greater surface coverage is required in fractured ground. The plate is manufactured with four pressed rib sections on the outer perimeters of the plate to provide more strength to the lighter gauge material. The 300 strata plate can be used with any size bolt and in conjunction with smaller diameter plates
![Page 10: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/10.jpg)
8 www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
3.2 Driver Tools
Fero supplies a full range of purpose designed driver tools for use with both mechanised and hand-held bolting equipment. Fero driver tools and spiral bar are manufactured from high grade heat treated steel. Threading meets Australian Standards AS1275. Fero Driver Tools are supplied loose per unit. Other packing quantities are available on request.
Driver Tools for Fero friction stabilisers include:
33mm Stabiliser Driver Tool The 33mm stabiliser driver tool fits directly into the chuck of the hand-held unit and is available in male and female configurations to suit the 22mm hex adaptor.
39mm & 47mm Stabiliser Driver Tools Our 39 or 47mm stabiliser driver tools are attached to the rock drill by a spiral bar. This allows the stabiliser driver tool to extend outside the front centraliser for ease of installation of friction stabilisers. Available in an R38 or T38 thread.
Spiral Bar The spiral bar is manufactured with a cold rolled thread over its entire length and supplied in standard lengths of 3100mm or 3600mm. The spiral bar is cut to the desired length on the mine site and used as a joiner between the rock drill and the 39mm and 47mm stabiliser driver tool.
3.3 Drill Bit Gauge
3.4 Pull Testing Collars
The pull collar is placed on the friction stabiliser during the installation process to enable the load capacity of the bolt to be pull tested and verify the effectiveness of friction stabiliser upon completion of installation and periodically over time. Fero Strata supplies either carbon hollow bar or forged pull collars to fit 33mm, 39mm and 47mm diameter friction stabilisers. Available untreated or hot-dip galvanised in packs of 50.
The diameter of the drill hole is critical for ensuring the effectiveness of the friction stabiliser. A bit gauge is used to measure the diameter of the drill bit which drills the hole for the friction stabiliser to be inserted into. The drill hole diameter should be slightly smaller (typically 2-4mm smaller) than the friction stabiliser to be used. In soft ground it may be necessary to further reduce the bit size to increase contact between the steel and the hole thus generating greater load transfer and increasing pull-out load.
Spiral Bar39 & 47mm Stabiliser Driver Tool33mm Stabiliser Driver Tool Pull Testing Collars
![Page 11: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/11.jpg)
9www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
3.5 Pull Testing Unit
Pull testing equipment is essential to verify friction stabiliser and other rock bolt system performance. Fero supplies both hand operated and battery operated pull testing units for in-situ testing of most rock bolt systems. The unit is easily transportable. Alternatively, the Fero Strata technical service team can provide full underground pull testing services.
4.0 Product Codes, Weights & Pack Sizes
Fero Product Code
Fero Product Description
Diameter (mm)
Length (mm)
Surface Finish
Weight Each (kg)
Pack Qty
Pack Weight (kg)
Ring Colour ID
FS33-0900 Friction Stabiliser 33 x 900 33 900 Un-Treated 1.50 300 450 -
FS33-1500 Friction Stabiliser 33 x 1500 33 1500 Un-Treated 2.40 300 720 -
FS33-1800 Friction Stabiliser 33 x 1800 33 1800 Un-Treated 2.75 300 825 -
FS33-0900G Friction Stabiliser 33 x 900 - HDG 33 900 Hot Dip Galvanised 1.50 300 450 -
FS33-1500G Friction Stabiliser 33 x 1500 - HDG 33 1500 Hot Dip Galvanised 2.50 300 750 -
FS33-1800G Friction Stabiliser 33 x 1800 - HDG 33 1800 Hot Dip Galvanised 3.00 300 900 -
FS39-0600 Friction Stabiliser 39 x 600 39 600 Un-Treated 1.20 150 180 -
FS39-0900 Friction Stabiliser 39 x 900 39 900 Un-Treated 1.70 150 255 -
FS39-2400 Friction Stabiliser 39 x 2400 39 2400 Un-Treated 4.25 150 638 -
FS39-0600G Friction Stabiliser 39 x 600 - HDG 39 600 Hot Dip Galvanised 1.20 150 180 -
FS39-0900G Friction Stabiliser 39 x 900 - HDG 39 900 Hot Dip Galvanised 1.70 150 255 -
FS39-2400G Friction Stabiliser 39 x 2400 - HDG 39 2400 Hot Dip Galvanised 4.50 150 675 -
FS40-900G Friction Stabiliser 40 x 900 - HDG 40 900 Hot Dip Galvanised 2.25 150 338 -
FS40-2400G Friction Stabiliser 40 x 2400 - HDG 40 2400 Hot Dip Galvanised 6 150 900 -
FS45-2400G Friction Stabiliser 45 x 2400 - HDG 45 2400 Hot Dip Galvanised 6.95 150 1043 Blue
FS47-0900 Friction Stabiliser 47 x 900 47 900 Un-Treated 2.50 150 375 -
FS47-1800 Friction Stabiliser 47 x 1800 47 1800 Un-Treated 5.10 150 765 -
FS47-2100 Friction Stabiliser 47 x 2100 47 2100 Un-Treated 6.10 150 915 -
FS47-2400 Friction Stabiliser 47 x 2400 47 2400 Un-Treated 6.70 150 1005 -
FS47-3000 Friction Stabiliser 47 x 3000 47 3000 Un-Treated 8.60 150 1290 -
FS47-0900G Friction Stabiliser 47 x 900 - HDG 47 900 Hot Dip Galvanised 2.75 150 413 -
FS47-1800G Friction Stabiliser 47 x 1800 - HDG 47 1800 Hot Dip Galvanised 5.20 150 780 Red
FS47-2100G Friction Stabiliser 47 x 2100 - HDG 47 2100 Hot Dip Galvanised 6.20 150 930 Green
FS47-2400G Friction Stabiliser 47 x 2400 - HDG 47 2400 Hot Dip Galvanised 6.95 150 1043 -
FS47-3000G Friction Stabiliser 47 x 3000 - HDG 47 3000 Hot Dip Galvanised 8.80 150 1320 Yellow
![Page 12: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/12.jpg)
10
www.fero.com.au
![Page 13: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/13.jpg)
Wriggle Bolts are a simple and effective system that enables resin bolting in large holes for long-term support.
A Division of Fero Group
1.2 Wriggle Bolts
![Page 14: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/14.jpg)
12 www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
It is Fero’s unique wriggle system that makes this bolt so effective. The distorted or wriggled section of the bolt increases the effective diameter of the bolt in order to maximise load transfer and assist in resin mixing. The end-shear assembly assists in shredding resin packaging to eliminate gloving. The wriggle section of the bolt assists in mixing the two component polyester resin capsules – resulting in a solid anchor and additional load transfer. Fero Wrigglebolts are offered with a continuous hot rolled T20 or T25 thread over the entire length of the bar or with a rolled 250mm left hand M24 thread.
Fero also manufacture and supply a de-bonded wriggle bolt. The de-bonded section on the wriggle bolt T20, T25 or N24 prevents grout or resin setting around this section of the bar, allowing for the bolt to yield under strata movement.
Manufactured and supplied from Fero Strata’s Perth and Brisbane operations, wriggle bolts are supplied with a pinned nut and dome ball washer as standard and are bound with steel strap and timber packaging for safe transport. The pinned nut eliminates the need to store loose inventory and provides a ready to use torque nut.
Fero wriggle bolts are manufactured to meet Australia’s high quality standards and are extensively quality tested in-house. Field testing has proven the wriggle bolt to be highly effective in both manual and mechanical operations. Our galvanised product provides additional protection in corrosive environments.
Our technical services team are available to provide technical and product advice, operator training and in-situ-pull testing.
Contact the Fero Strata team for more information at [email protected]
1.0 Wriggle Bolts The Fero wriggle bolt has been specifically designed for use in long-term or permanent strata reinforcing of underground mining and tunnelling excavations. This system is highly effective for operations requiring the advantages of resin anchors.
1.1 Features
Provides solid anchor & additional load transfer
Shear end to cut through resin packaging
The wriggles assist in mixing the resin
Comes standard with torque nut (pinned nut & dome ball washer)
Available in threaded bar version
Available in hot dip galvanised or untreated steel
Available in deformed bar version with a rolled left hand thread
Pinned Nut End
Shear End
![Page 15: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/15.jpg)
13www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
1.2 Wriggle Bolt Range
Fero manufactures and supplies wriggle bolts in a thread bar and deformed bar version with a rolled left hand thread in a range of lengths from 1.2m to 3m or can be custom-made to suit various ground conditions.
The type of ground where wriggle bolts may be used should be evaluated to determine the correct length and diameter of wriggle bolt required. The wriggle bolt system will provide a higher load capacity in unstable ground and soft strata may require a longer anchorage length. Pull tests should be performed to determine yield and resin anchorage capabilities.
Wriggle Bolt T20 and T25 Manufactured as a continuous hot-rolled thread, the 20mm and 25mm thread bar provides support in a variety of hole depths in all ground conditions. The continuous thread on the entire length of the bolt provides greater flexibility when tensioning in a range of hole lengths.
Wriggle Bolt N24 The deformed bar has 250mm of rolled left hand thread providing more threads per centimetre, and a greater load capacity. Fero wriggle bolts are available in galvanised or untreated steel in packs of 100.
Wriggle Bolt De-Bonded The de-bonded section on the wriggle bolt T20, T25 or N24 prevents grout or resin setting around this section of the bar, allowing the bar to elongate when placed under yield.
![Page 16: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/16.jpg)
14 www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
Fero Strata manufactures and supplies a range of specifically designed accessories for use with wriggle bolts. It is recommended that wriggle bolts are used with associated Fero Strata products.
For more detailed information talk to one of our team or ask for a Fero Accessories brochure.
Email: [email protected]
2.0 Physical & Technical Properties
3.0 Associated Accessories
T20 Minimum
T20 Typical
T25 Minimum
T25 Typical
N24 Minimum
N24 Typical
Physical Properties
Core Diameter (mm) 19.3 19.5 24.4 24.7 23 23.5
Overall Bar Diameter (mm) 22.2 22.5 28.1 28.5 26 27
Effective Wriggle Diameter (mm) - 31 - 33 - 33
Effective Wriggle Length (mm) - 500 - 500 - 500
Thread Pitch, LHT (mm) - 10 - 12.5 - 3
Hex Nut Size (A/F - mm) - 36 - 41 - 36
Pin Nut - Typical Break out Torque (Nm) - 80 - 80 - 80
Weight Per Metre (kg) - 2.48 - 3.85 - 3.55
Installation Details
Optimum Hole Diameter (mm) - 33 - 35 - 35
Mechanical Properties
Yield Strength (MPa) 500 550 500 550 500 550
Yield Force (Metric Tonne) 15.8 17.3 24.6 27.1 22.5 24.8
Tensile Strength (Mpa) 600 650 600 650 600 650
Tensile Force (Metric Tonne) 18.9 20.5 29.5 32.0 27.0 29.3
Cross sectional area (mm2) - 315 - 492 - 450
Uniform Elongation, Agt (%) 10 12 10 12 5 7
Testing Standards
Material AS4671Galvanising AS4680Threading AS1275
![Page 17: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/17.jpg)
15www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
3.1 Strata Support Plates Range
Fero Strata manufactures and supplies a range of support plates for use with wriggle bolts including:
150mm Dome Plate Dome Plates are primarily used when increased load capacity is required. It is the dome shape of this 150 x 8mm general purpose plate that increases the load capacity. Dome Plates are primarily used in conjunction with domed barrel and wedge or a dome ball washer in the installation of solid bolts and cable bolts. Fero can also supply dome plates in a range of thickness and size as per customer requests.
Duplex Franklin Plate The Duplex Plate is a 5mm thick Franklin Plate welded to a 1.9mm thick 300 x 280mm strata plate, the pressed rib sections in the 1.9mm material provide additional strength and minimise deformation upon installation. The Duplex Plate gives greater surface coverage when supporting strata-mesh or when used directly on rock surface. User friendly round edges for increased safety and mesh protection.
300 Strata Plate This lighter gauge 1.9mm plate is used when greater surface coverage is required in fractured ground. The plate is manufactured with four pressed rib sections on the outer perimeters of the plate to provide more strength to the lighter gauge material. The 300 strata plate can be used with any size bolt and in conjunction with smaller diameter plates.
Franklin Plate Fero’s Franklin Plate is another purpose designed product developed in-house. The Franklin Plate is a 5mm ribbed support plate that provides a high load capacity but is more cost effective and stronger than the similar load bearing capacity 8mm dome plate.
This high load and ribbed support plate is used in conjunction with a domed barrel and wedge or dome ball washer in the installation of wriggle bolts, solid bolts and cable bolts. The ribs provide additional strength to the 5mm material, enabling the plate to carry loads in excess of 200kN – therefore eliminating the need to use an 8mm dome plate.
![Page 18: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/18.jpg)
16 www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
Hanger Nuts
Fero supplies a full range of purpose designed driver tools for use with both mechanised and hand-held bolting equipment. Threading meets Australian Standards AS1275. Fero Driver Tools are supplied loose per unit, with other packing quantities available on request. Driver Tools for use with Fero Wriggle bolts include:
Resin Bolt Driver Tools Used for mechanised installation (jumbo) of wriggle bolts and other solid bolts that come standard with a pinned nut. Resin Bolt Drivers are available in R38 or T38 thread and in various lengths (Standard lengths 500mm, 600mm, 720mm and 900mm; with other lengths available upon request and to suit different Hex nut sizes.
Fero can also apply standard driver tools for use with Air-Leg mining equipment. The driver tool is inserted directly into the Air-Leg chuck.
3.2 Driver Tools 3.3 Resin Anchors
Resin anchors are used to secure wriggle bolts and solid bolts to provide roof support in underground mining and tunnelling. Fero supplies an extensive range of resin anchors to suit all types of bolting patterns and strata conditions. (See Resin brochure for more details)
3.4 Resin Anchor Insertion System
Various size tubes and lengths available to suit a range of resin diameters. The insertion system ensures quick, safe, efficient insertion of the resin capsule into the hole. (See Resin brochure for more details)
Resin AnchorDriver Tool
Available in both D series and W series, hanger nuts screw onto the thread of the solid bolt to support cabling and other services. Various nut size and thread combinations are available to suit any rock bolt in the Fero Strata range. We can also customise hanger nuts to suit various applications. Standard sizes and other sizes readily available.
3.5 Hanger Nuts
![Page 19: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/19.jpg)
17www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
Fero Product Code
Fero Product Description
Length (mm)
Surface Finish
Weight Each (kg)
Pack Qty
Pack Weight (kg)
FWBT20-1800C Wrigglebolt T20 x 1800 c/w Pinned Nut & Dome Ball Washer 1800 Un-Treated 4.8 100 475
FWBT20-2400C Wrigglebolt T20 x 2400 c/w Pinned Nut & Dome Ball Washer 2400 Un-Treated 6.3 100 625
FWBT20-3000C Wrigglebolt T20 x 3000 c/w Pinned Nut & Dome Ball Washer 3000 Un-Treated 7.8 100 775
FWBT20-1800CG Wrigglebolt T20 x 1800 c/w Pinned Nut & Dome Ball Washer - HDG 1800 Hot Dip Galvanised 5.0 100 500
FWBT20-2400CG Wrigglebolt T20 x 2400 c/w Pinned Nut & Dome Ball Washer - HDG 2400 Hot Dip Galvanised 6.6 100 660
FWBT20-3000CG Wrigglebolt T20 x 3000 c/w Pinned Nut & Dome Ball Washer - HDG 3000 Hot Dip Galvanised 8.2 100 820
FWBT25-1800C Wrigglebolt T25 x 1800 c/w Pinned Nut & Dome Ball Washer 1800 Un-Treated 7.2 100 720
FWBT25-2400C Wrigglebolt T25 x 2400 c/w Pinned Nut & Dome Ball Washer 2400 Un-Treated 9.6 100 955
FWBT25-3000C Wrigglebolt T25 x 3000 c/w Pinned Nut & Dome Ball Washer 3000 Un-Treated 11.9 100 1185
FWBT25-1800CG Wrigglebolt T25 x 1800 c/w Pinned Nut & Dome Ball Washer - HDG 1800 Hot Dip Galvanised 7.6 100 760
FWBT25-2400CG Wrigglebolt T25 x 2400 c/w Pinned Nut & Dome Ball Washer - HDG 2400 Hot Dip Galvanised 10.0 100 1000
FWBT25-3000CG Wrigglebolt T25 x 3000 c/w Pinned Nut & Dome Ball Washer - HDG 3000 Hot Dip Galvanised 12.5 100 1245
FWBN24-1800C Wrigglebolt N24 x 1800 c/w Pinned Nut & Dome Ball Washer 1800 Un-Treated 6.8 100 680
FWBN24-2400C Wrigglebolt N24 x 2400 c/w Pinned Nut & Dome Ball Washer 2400 Un-Treated 9.0 100 900
FWBN24-3000C Wrigglebolt N24 x 3000 c/w Pinned Nut & Dome Ball Washer 3000 Un-Treated 11.2 100 1120
FWBN24-1800CG Wrigglebolt N24 x 1800 c/w Pinned Nut & Dome Ball Washer - HDG 1800 Hot Dip Galvanised 7.3 100 725
FWBN24-2400CG Wrigglebolt N24 x 2400 c/w Pinned Nut & Dome Ball Washer - HDG 2400 Hot Dip Galvanised 9.6 100 960
FWBN24-3000CG Wrigglebolt N24 x 3000 c/w Pinned Nut & Dome Ball Washer - HDG 3000 Hot Dip Galvanised 11.9 100 1190
4.0 Product Codes, Weights & Pack Sizes
![Page 20: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/20.jpg)
18
www.fero.com.au
![Page 21: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/21.jpg)
Threaded Bar Bolts are effective in both manual and mechanical operations and can be installed with either resin or cementitious grouts.
A Division of Fero Group
1.3 Threaded Bar Bolts
![Page 22: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/22.jpg)
20 www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
Fero manufactures and supplies threaded bar bolts with a T20, T25 or T32 left-hand continuous thread profile. The continuous hot rolled thread provides good load transfer properties and a high flexibility in fragile ground and various hole sizes.
Fero also provides a conventional Rebar Threaded bar bolt manufactured from N24 deformed bar provided with a cold rolled left-hand thread (on one or both ends of the bar), that provides more threads per centimetre, resulting in a greater load capacity. The N24 deformed bar can be used with mechanical anchors.
Threaded bar bolts can be supplied with a combined pinned nut & dome ball washer or loose with components (nut and dome ball washer).
Manufactured to meet Australia’s high quality standards, Fero Strata quality tests all products to make sure they meet if not exceed these standards. Our threaded bar bolt products are tried and tested in the field and are proven to be highly effective in both manual and mechanical operations. Our galvanised product provides additional protection in corrosive environments.
The Fero Strata technical services team are available to provide technical and product advice, operator training and in-situ-testing.
Contact the Fero Strata team for more information at [email protected]
1.0 Threaded Bar Bolts Threaded Bar Bolts are designed to provide ground support for underground mining development, production headings and underground tunnelling.
1.1 Features
Available in component form
Can be supplied with pinned nut & dome ball washer or as bar only
Provides solid anchor and additional load transfer
Available untreated or hot-dip galvansied
Threaded Bar T20
M24 Rolled LHT
![Page 23: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/23.jpg)
21www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
Thread bar T20, T25 and T32 Manufactured as a continuous hot-rolled left-hand thread, the 20mm, 25mm and 32mm thread bar provides support in a variety of hole depths and diameters in all ground conditions. Thread bar can be supplied as bar only or complete with pinned nut and dome ball washer.
1.2 Threaded Bar Bolts Range
Fero manufactures and supplies a range of threaded bar bolts, various lengths and diameters are available to suit ground conditions. Strata conditions should be evaluated as softer ground may require a longer anchorage length. Pull tests should be performed to determine yield and resin anchorage capabilities.
Threaded bar bolts are manufactured in a Thread bar or Deformed bar version with various diameters and lengths. Lengths typically range from 1200mm to 3000mm in 300mm increments. Other lengths and customised product to suit specific requirements are available on request. Threaded bar bolts are available un-treated or hot dip galvanisd and supplied in packs of 100, threaded bar bolts complete with pinned nut and dome ball washer are also supplied in packs of 100. Other packing quantities are available on request.
ReBar Bolt The ReBar threaded bar bolt is made from N24 deformed bar and has a cold rolled left-hand thread (on one or both ends) that provides more threads per centimeter, resulting in a greater load capacity. Fero ReBar bolts are available in galvanised or untreated steel in packs of 100.
![Page 24: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/24.jpg)
22 www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
2.0 Physical & Technical Properties
3.0 Associated Accessories
T20 Minimum
T20 Typical
T25 Minimum
T25 Typical
T32 Minimum
T32 Typical
N24 Minimum
N24 Typical
Physical Properties
Bolt Core Diameter (mm) 19.3 19.5 24.4 24.7 30.05 31.35 23 23.5
Overall Bar Diameter 22.2 22.5 28.1 28.5 36.7 37.2 26 27
Thread Pitch, LHT (mm) - 10 - 12.5 - 16 - 3
Weight Per Metre (kg) - 2.48 - 3.85 - 6.31 - 3.48
Mechanical Properties
Yield Strength (MPa) 500 550 500 550 500 550 500 550
Yield Force (Metric Tonne) 15.8 17.3 24.6 27.1 40.3 44.3 22.5 24.8
Tensile Strength (MPa) 600 650 600 650 600 650 600 650
Tensile Force (Metric Tonne) 18.9 20.5 29.5 32.0 48.3 52.3 27.0 29.3
Cross sectional area (mm2) - 315 - 492 - 805 - 450
Uniform Elongation (%) 10 12 10 12 10 12 5 7
Testing Standards
Material AS4671
Galvanising AS4680
Fero Strata manufactures and supplies a comprehensive range of accessories for use with threaded bar bolts. It is recommended that threaded bar bolts be used with associated Fero Strata products.
For more detailed information contact the Fero Strata technical services team of ask for a Fero Accessories brochure.
Email: [email protected]
![Page 25: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/25.jpg)
23www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
3.1 Strata Support Plates Range
Dome Plate Dome plates are primarily used when increased load capacity is required. It is the dome shape of this 150mm x 8mm general purpose plate that increases the load capacity. Dome plates are primarily used in conjunction with domed barrel and wedge or a dome ball washer in the installation of threaded bar bolts and cable bolts. Fero can also supply dome plates in a range of thickness and size as per customer requests.
300 Strata Plate This lighter gauge 1.9mm plate is used when greater surface coverage is required in fractured ground. The plate is manufactured with four pressed rib sections on the outer perimeters of the plate to provide more strength to the lighter gauge material. The 300 strata plate can be used with any size bolt and in conjunction with smaller diameter plates.
Franklin Plate Fero’s franklin plate is another purpose designed product developed in-house. The franklin plate is a 5mm ribbed support plate that provides a high load capacity but is more cost effective and stronger than the similar load bearing capacity 8mm dome plate.
This high load and ribbed support plate is used in conjunction with a domed barrel and wedge or dome ball washer in the installation of wriggle bolts, threaded bar bolts and cable bolts. The ribs provide additional strength to the 5mm material, enabling the plate to carry loads in excess of 200kN – therefore eliminating the need to use an 8mm dome plate.
Duplex Franklin Plate The duplex plate is a 5mm thick fanklin plate welded to a 1.9mm thick 300 x 280mm strata plate, the pressed rib sections in the 1.9mm material provide additional strength and minimise deformation upon installation. The duplex plate gives greater surface coverage when supporting strata-mesh or when used directly on rock surface. User friendly round edges for increased safety and mesh protection.
![Page 26: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/26.jpg)
24 www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
3.4 Driver Tools
Fero supplies a full range of purpose designed driver tools for use with both mechanised and hand-held bolting equipment. Threading meets Australian Standards AS1275. Fero Driver Tools are supplied loose per unit, with other packing quantities available on request. Driver Tools for use with threaded bar bolts include:
Spin Adaptors Spin adaptors are used to install threaded bar bolts supplied without a standard pinned nut. Primarily used for hand held installation with Air Leg, spin adaptors are available in female configurations to suit the 22mm Hex adaptor.
Resin Bolt Driver tools Used for mechanised installation (jumbo) of wriggle bolts and other threaded bar bolts that come standard with a pinned nut. Resin bolt drivers are available in R38 or T38 thread and in various lengths (Standard lengths 500mm, 600mm, 720mm and 900mm; with other lengths available upon request and to suit different Hex nut sizes.
3.2 Nuts – Mining
The nut is attached to the threaded end of the bolt and is used to secure the plate during the installation of rock bolts. Fero also offer a one piece Dome ball nut which assists with better alignment of the bolt and plate, as well as eliminating the need to carry two inventory items on site (nut & dome ball washer). Fero nuts are available in a range of sizes and thread directions (both left-hand and right-hand thread). Nuts can be supplied untreated or hot-dip galvanised which is recommended in corrosive environments. Standard sizes in table below with other sizes readily available.
3.3 Dome Ball Washers
The dome ball washer is used in conjunction with the nut and the compatible dome plate. The dome ball washer assists in better alignment of the bolt and plate and maximising of load transfer. Standard sizes in table below with other sizes readily available.
Spin AdaptorsNut c/w Dome Ball WasherNuts - Mining Dome Ball Washer
![Page 27: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/27.jpg)
25www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
3.7 Resin Insertion System
3.5 Couplers 3.6 Resin Anchors
Fero supplies various size tubes and lengths available to suit a range of resin diameters. The insertion system ensures quick, safe, efficient insertion of the resin capsule into the hole (See Resins brochure for more details).
Couplers enable bolts to be joined to enable longer length bolting in confined spaces. Primarily used when headroom is limited, bolts are threaded from each end of the coupler so equal bolt threading is obtained. Manufactured from high tensile steel and available untreated or hot-dip galvanised.
Resin anchors are used to secure wriggle bolts and threaded bar bolts to provide roof support in underground mining and tunnelling. Fero supplies an extensive range of resin anchors to suit all types of bolting patterns and strata conditions (See Resins brochure for more details).
Mechanical AnchorsHanger Nuts
3.8 Hanger Nuts 3.9 Mechanical Anchors M16, M20 & M24
Available in both D series and W series, hanger nuts screw onto the thread of the threaded bar bolts to support cabling and other services. Various nut size and thread combinations are available to suit any rock bolt in the Fero Strata range. We can also customise hanger nuts to suit various applications. Standard sizes are depicted below with other sizes readily available.
Quick and easy to install, mechanical anchors provide immediate point anchored load bearing support and are best suited to medium to hard rock types. Once inserted in the hole at the end of the threaded bar bolts or eye bolt, the mechanical anchor is tensioned. Load bearing capacity will depend on ground type.
Resin Anchor
![Page 28: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/28.jpg)
26 www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
Fero Product Code
Fero Product Description
Length (mm)
Surface Finish
Weight Each (kg)
Pack Qty
Pack Weight (kg)
FTBT20-1200 Threaded Bar T20 x 1200 1200 Un-Treated 3.0 100 300
FTBT20-1800 Threaded Bar T20 x 1800 1800 Un-Treated 4.5 100 450
FTBT20-2400 Threaded Bar T20 x 2400 2400 Un-Treated 6.0 100 600
FTBT20-3000 Threaded Bar T20 x 3000 3000 Un-Treated 7.5 100 750
FTBT20-1500G Threaded Bar T20 x 1500 - HDG 1500 Hot Dip Galvanised 4.0 100 400
FTBT20-1800G Threaded Bar T20 x 1800 - HDG 1800 Hot Dip Galvanised 4.8 100 475
FTBT20-2400G Threaded Bar T20 x 2400 - HDG 2400 Hot Dip Galvanised 6.4 100 635
FTBT20-3000G Threaded Bar T20 x 3000 - HDG 3000 Hot Dip Galvanised 8.0 100 795
FTBT20-1800C Threaded Bar Bolt T20 x 1800 c/w Pinned Nut & Dome Ball Washer
1800 Un-Treated 4.8 100 475
FTBT20-2400C Threaded Bar Bolt T20 x 2400 c/w Pinned Nut & Dome Ball Washer
2400 Un-Treated 6.3 100 625
FTBT20-3000C Threaded Bar Bolt T20 x 3000 c/w Pinned Nut & Dome Ball Washer
3000 Un-Treated 7.8 100 775
FTBT20-1500CG Threaded Bar Bolt T20 x 1500 c/w Pinned Nut & Dome Ball Washer - HDG
1500 Hot Dip Galvanised 4.3 100 425
FTBT20-1800CG Threaded Bar Bolt T20 x 1800 c/w Pinned Nut & Dome Ball Washer - HDG
1800 Hot Dip Galvanised 5.0 100 500
FTBT20-2400CG Threaded Bar Bolt T20 x 2400 c/w Pinned Nut & Dome Ball Washer - HDG
2400 Hot Dip Galvanised 6.6 100 660
FTBT20-3000CG Threaded Bar Bolt T20 x 3000 c/w Pinned Nut & Dome Ball Washer - HDG
3000 Hot Dip Galvanised 8.2 100 820
FTBT25-2400 Threaded Bar T25 x 2400 2400 Un-Treated 9.3 100 925
FTBT25-3000 Threaded Bar T25 x 3000 3000 Un-Treated 11.6 100 1155
FTBT25-2400G Threaded Bar T25 x 2400 - HDG 2400 Hot Dip Galvanised 9.7 100 970
FTBT25-3000G Threaded Bar T25 x 3000 - HDG 3000 Hot Dip Galvanised 12.2 100 1215
FTBT25-2400C Threaded Bar Bolt T25 x 2400 c/w Pinned Nut & Dome Ball Washer
2400 Un-Treated 9.6 100 955
FTBT25-3000C Threaded Bar Bolt T25 x 3000 c/w Pinned Nut & Dome Ball Washer
3000 Un-Treated 11.9 100 1185
FTBT25-2400CG Threaded Bar Bolt T25 x 2400 c/w Pinned Nut & Dome Ball Washer - HDG
2400 Hot Dip Galvanised 10.0 100 1000
FTBT25-3000CG Threaded Bar Bolt T25 x 3000 c/w Pinned Nut & Dome Ball Washer - HDG
3000 Hot Dip Galvanised 12.5 100 1245
FTBT32-4000CG Threaded Bar Bolt T32 x 4000 c/w Pinned Nut & Dome Ball Washer - HDG
4000 Hot Dip Galvanised 27.6 50 1380
FRBN24M241- 2400 Rebar Bolt N24 x 2400 c/w Rolled M24 Thread, 1 End 2400 Un-Treated 8.7 100 865
FRBN24M241-2400G Rebar Bolt N24 x 2400 c/w Rolled M24 Thread, 1 End - HDG 2400 Hot Dip Galvanised 9.4 100 935
FRBN24M241-2400C Rebar Bolt N24 x 2400 c/w Rolled M24 Thread, 1 End Pinned Nut & Dome Ball Washer
3000 Un-Treated 9.0 100 900
FRBN24M241-2400CG Rebar Bolt N24 x 2400 c/w Rolled M24 Thread, 1 End Pinned Nut & Dome Ball Washer - HDG
3000 Hot Dip Galvanised 9.6 100 960
4.0 Product Codes, Weights & Pack Sizes
![Page 29: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/29.jpg)
Designed for metaliferous mining and civil construction reinforcement in areas of strata movement.
A Division of Fero Group
1.4 Cable Bolts
![Page 30: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/30.jpg)
28 www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
Manufactured using 15.2mm compact strand, cable bolts are available in single or twin strand options at pre cut lengths or as continuous roll of single strand at various lengths.
Cable bolts can also be supplied with bulbed sections in various configurations per metre. The bulbs provide radial confinement once grouted. This is achieved through the grouted bulb section acting as a wedge resulting in an increased effectiveness of load transfer.
Fero also supplies mechanical anchored cable bolts, which have been designed for areas where immediate support is required. The mechanical anchored cable bolts can be tensioned immediately and grouted at a later stage. Tensile strength does not reach capacity until the grout has completely cured. In competent ground, the specially designed mechanical anchor supports the ultimate tensile strength of the strand.
Garford Cable Bolts are designed and manufactured to international quality accredited standards: ISO:9001 and Australian standards: AS/NZS 4672.1.2.
Fero also supplies a full range of accessories, including various barrel and wedges, numerous plate designs, rolls of grout and breather tube and hole-plugging products such as cotton waste.
Our technical services team is available to provide technical and product advice and operator training. Contact the Fero Strata team for more information.
1.0 Cable Bolts Cable Bolts have been used extensively in mining and civil construction around the world since the early 1970s. Garford is the main supplier of Cable Bolts in Australia and Fero is an authorised distributor of Garford products.
1.1 Features
Single strand or twin strand options available in various lengths
Plain or bulbed options available, with bulb spacing of more than one metre available on request
Fish hooks fitted to cables for retention in holes prior to grouting
Single or double tails on twin strand cables for tensioning
De-Bonded cable bolts available
Continuous rolls of either plain or bulb single strand cable available for mechanised bolting
Plain and Bulbed Cable Bolts
Mechanical anchored cable bolt
![Page 31: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/31.jpg)
29www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
1.2 Cable Bolt Range
Fero supply a full range of Garford 15.2mm compact strand cable bolts, including single and twin, plain or bulbed and both 15.2mm compact plain strand mechanical anchor and compact ball-bearing mechanical anchor cable bolts.
Pre-cut 15.2 mm cable bolts are supplied as a single unit complete with a fish hook to anchor the cable into the borehole prior to grouting. Fero also offer continuous cable rolls up to 1300m in length.
Cable bolts can also be supplied pre-assembled with grout and breather tube attached.
Mechanical Anchored Cable Bolts Mechanical anchored cable bolts have a specially designed mechanical anchor, and provide a 300 Kn minimum ultimate tensile strength. Two types of mechanical anchors are available to suit either a 48mm or 64mm hole. Mechanical anchored or compact ball-bearing mechanical anchor cable bolts can be used when the bond between the plain strand and the grout is not sufficient to transfer the full potential load to the bolt. The compact ball-bearing mechanical anchored cable bolt is bulbed, with ball bearings inserted into the bulbs, and can be fully tensioned without the bulbs collapsing.
Supplied in any required length and in coiled bundles of 50, with other packing quantities are available on request.
Plain and Bulbed Cable Bolts Commonly used to supplement existing strata reinforcement, plain and bulbed 15.2mmm compact strand cable bolts are available in a variety of precut lengths or in continuous rolls. The bulbed diameter ranges from 26mm to 28mm with up to 6 bulbs per meter available. The diameter of the bulb can be altered to meet individual requirements. Individual lengths of up to six metres are strapped in bundles of 50. Individual lengths of six metres and over are coiled in bundles of 25. Other packing quantities are available on request.
Cable bolts can be debonded on request for use in yielding ground conditions.
![Page 32: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/32.jpg)
30 www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
2.0 Physical & Technical Properties
3.0 Associated Accessories
Fero Strata manufactures and supplies a comprehensive range of accessories for use with cable bolts. It is recommended that cable bolts be used with associated Fero Strata products.
For more detailed information contact the Fero Strata technical services team of ask for a Fero Accessories brochure.
Email: [email protected]
Plain Cable Bulbed Cable Point Anchored Cable
Minimum Typical Minimum Typical Minimum Typical
Physical Properties
Cable Type Low Relaxation Seven Wire Steel Strand
Low Relaxation Seven Wire Steel Strand
Seven Wire Compact Strand
Cable diameter (mm) - 15.2 - 15.2 - 15.2
Bulb diameter (mm) 26 28 26 28 26 28
Weight per Metre (kg) - 1.125 - 1.125 1.18
Mechanical Properties
Yield Force at 0.2% (Metric Tonne)
21 24 21 24 21 28
Tensile Strength (MPA) - 1850 - 1850 - 1820
Tensile Force (Metric Tonne) 25 27 25 27 30 31
Cross sectional area (mm2) - 143 - 143 - 143
![Page 33: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/33.jpg)
31www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
3.1 Fixing Plates
3.2 Cable Anchors (Barrel & Wedge)
Dome Plates Dome plates are primarily used when increased load capacity is required. It is the dome shape of this 150mm x 8mm general purpose plate that increases the load capacity. Dome plates are primarily in conjunction with domed barrel and wedge or a dome ball washer in the installation of solid bolts and cable bolts. Fero can also supply dome plates in a range of thicknesses and sizes as per customer requests.
Used to secure the cable bolt against the plate and rock surface, Fero’s flat and dome barrel and wedge provide support at the collar of the hole and are available to suit various cable diameters.
Flat barrels and wedges are used for the installation of flat plates, while dome barrels and wedges are available to suit dome plates when anchoring cable bolts. The dome barrel allows the cable bolt to distribute the load evenly on the plate when pre-stressed. Wedges can be supplied in 3-leaf or 2-leaf configurations with an o-ring or circlip. Wedges are machined with serrations on the inside which are case hardened allowing the wedge serrations to grip onto the cable during the pre-stressing process.
Flat Plates Available in standard sizes of 8-12mm thick and from 150mm to 300mm, with 22mm hole diameters and either one, two holes or slot holes, this general purpose plate is used with flat barrel and wedges in cable bolt installations. Fero can also supply flat plates in a range of thicknesses and sizes as per customer requests.
![Page 34: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/34.jpg)
32 www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
3.4 Breather & Grout Tubes 3.6 Cable Bolt Tensioner
5 3.5 Cotton Waste
Manufactured from high-density polyethylene material to resist abrasions and crushing, breather and grout tubes are usually used to pump cementitious grouts for rock and cable bolt applications. The breather tube works in conjunction with the Grout Tube to allow air to escape from the bolt hole and provides a positive indication of grouting progress. Standard sizes are available with other sizes readily available.
Fero supplies industry standard hydraulic 10 Tonne & 25 Tonne tensioners designed for 15.2mm cable bolts. Manufactured to withstand the demands of underground mining, the tensioner is designed to tension 15.2mm cable up to 10 or 25 tonnes and can be used for 12.7mm cable. The unit has an operating pressure of 80-120psi, weighs approximately 8kg and has a standard 3m length hose and a pressure gauge to enable accurate tensioning. Fero also offer a full range of spares to suit cable tensioners such as jaws, seal kits, nose cones, scraper seals and jack inner guide.
Cotton waste is used to bung holes to prevent grout escaping.
3.3 Grout Anchors
Cementitious anchoring grouts are used to secure cable bolts and solid bolts and as well as general strata injection and consolidation applications.
Fero’s cement anchoring range includes products suitable for manual and mechanised bolt grouting. Cement anchoring grouts should be mixed with potable water. Cement grouts should be stored in original packaging in dry conditions. High temperature or humidity may reduce the shelf life.
Cable Bolt Tensioner Cotton Waste
![Page 35: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/35.jpg)
33www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
4.0 Product Codes, Weights & Pack Sizes
Fero Product Code
Fero Product Description
Weight Each (kg)
Pack Size Pack Weight
Colour Code
Cable Bolts - Continuous
FCBC1B-500M Cable Bolt, Continuous 15.2mm One Bulb/Mtr x 500Mtrs 575 1 575 -
FCBC1B-650M Cable Bolt, Continuous 15.2mm One Bulb/Mtr x 650Mtrs 690 1 690 -
FCBC1B-700M Cable Bolt, Continuous 15.2mm One Bulb/Mtr x 700 Mtrs 805 1 805 -
FCBC1B-850M Cable Bolt, Continuous 15.2mm One Bulb/Mtr x 850 Mtrs 978 1 978 -
FCBC2B-700M Cable Bolt, Continuous 15.2mm Two Bulb/Mtr x 700 Mtrs 805 1 805 -
Cable Bolts - Pre-Cut
FCBS1B-6500 Cable Bolt, Single 15.2mm One Bulb/Mtr x 6500mm 8 25 188 Red
FCBS1B-10000 Cable Bolt, Single 15.2mm One Bulb/Mtr x 10000mm 12 25 289 White
FCBT1B-6000 Cable Bolt, Twin 15.2mm One Bulb/Mtr x 6000mm 14 25 345 Red
FCBT1B-6300 Cable Bolt, Twin 15.2mm One Bulb/Mtr x 6300mm 14 25 362 Red
FCBT1B-6500 Cable Bolt, Twin 15.2mm One Bulb/Mtr x 6500mm 15 25 374 Red
FCBT1B-9000 Cable Bolt, Twin 15.2mm One Bulb/Mtr x 9000mm 21 25 518 Brown
FCBT1B-10000 Cable Bolt, Twin 15.2mm One Bulb/Mtr x 10000mm 23 25 575 White
Cable Bolts - AssembledFCBT1BGB-6300 Cable Bolt, Twin 15.2mm One Bulb/Mtr c/w Grout & Breather Tube
x 6300mm15 40 605 Red
FCBT1BGB-9300 Cable Bolt, Twin 15.2mm One Bulb/Mtr c/w Grout & Breather Tube x 9300mm
22 40 893 Brown
FCBTDBBE-8000 Cable Bolt, Twin 5M Debonded + Swage,2M bulbed, 2B/M, 1M Tail, c/w Bulbed Ends - 8000mm
18 25 450 -
Cable Bolts - Point Anchored
FCBSM51-6500 Cable Bolt, Single 15.2mm Mechanical Anchor M51 x 6500mm 8 195 -
FCBSM64-6500 Cable Bolt, Single 15.2mm Mechanical Anchor M64 x 6500mm 8 195 -
![Page 36: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/36.jpg)
34
www.fero.com.au
![Page 37: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/37.jpg)
Fero Strata Plates offer optimal surface support when used in conjunction with Fero friction stabilisers, wriggle bolts, solid bolts and cable bolts.
A Division of Fero Group
2.1 Strata Support Plates
![Page 38: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/38.jpg)
36 www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
Fero strata plates are designed in-house and quality tested to a high-load capacity to ensure optimal surface support in a range of ground conditions. Each plate type is available in a range of dimensions to suit any bolt type and diameter in the Fero range.
All strata plates are available with hanger lugs for the support of service products and are available untreated or hot-dip galvanised for protection of the plate in corrosive environments. Field testing has proven Fero Strata plates to be highly effective.
Strata plates are manufactured to our strict quality standards, and meet if not exceed Australian quality standards and are subject to stringent in-house quality testing.
Fero Strata has also been developed as a research and development unit and can assist in the development of specific product requirement. The 225 stabiliser plate is an example of this. Having been developed as a cost effective alternative to the duplex stabiliser plate for a specific client the plate is now a staple in the Fero strata plates range.
Contact the Fero Strata technical services team for technical and product advice and operator training for any or all of our products.
Contact the Fero Strata team for more information at [email protected]
1.1 Features
Comprehensive range
Quality tested in-house
Hot-dip galvanised and untreated steel available
Various packing quantities available on request
Supplied bundled and strapped on wooden pallets
All plates incorporate hanging lug for service lines (other than Flat plate)
1.0 Fixing Plates Fero Strata manufactures and supplies a comprehensive range of strata plates for use with Fero friction stabilisers, wriggle bolts, solid bolts, cable bolts and other specialty bolts
![Page 39: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/39.jpg)
37www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
1.2 Plate Range
Fero strata plates are designed in-house and quality tested to an effective load capacity to provide optimal surface support in a range of ground conditions. Fero strata plates are available to suit any bolt type and diameter in the Fero range.
125 and 150 Stabiliser Plates A general purpose plate, both the 125 and 150 stabiliser plates are manufactured from 4mm material to suit 33mm and 39mm friction stabilisers; and can be used with a 47mm friction stabiliser. The dome assists in stabiliser alignment and provides additional strength. The hanger lug provides support of service products.
300 Strata plate This lighter gauge 1.9mm plate is used when greater surface coverage is required in fractured ground. The plate is manufactured with four pressed rib sections on the outer perimeters of the plate to provide more strength to the lighter gauge material. The 300 strata plate can be used with any size bolt and in conjunction with smaller diameter plate.
Duplex Stabiliser Plate The duplex plate is a 4mm thick 125 or 150 stabiliser plate welded to a 1.9mm thick 300 x 280mm strata plate, the pressed rib sections in the 1.9mm material provide additional strength and minimise deformation upon installation. The Duplex plate gives greater surface coverage when supporting strata-mesh or when used directly on rock surface. User friendly round edges for increased safety and mesh protection.
200 and 225 Stabiliser Plates A specialised plate, the 200 and 225 stabiliser plate is also manufactured from 4mm material. The 225 stabiliser plate was developed as a cost saving alternative to the duplex stabiliser plate. The 225 plate provides slightly less surface coverage than the duplex plate. However, as it is made entirely from 4mm material, it provides higher grade coverage over a larger surface area than the larger 1.9mm material area of the duplex plate. The plate is designed to deform during the installation process to prevent damage to strata-mesh and to eliminate point loading of the Friction Stabiliser ring. The 200 or 225 plate is typically used with 47 mm stabiliser but can also be used with 33mm and 39mm friction stabiliser. Dual hanger lugs provide extra versatility for support of service products.
![Page 40: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/40.jpg)
38 www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
Franklin Plate Fero’s Franklin plate is another purpose designed product developed in-house. The Franklin plate is a 5mm ribbed support plate that provides a high load capacity but is more cost effective and stronger than the similar load bearing capacity 8mm dome plate. This high load and ribbed support plate is used in conjunction with a domed barrel and wedge or dome ball washer in the installation of wriggle bolts, solid bolts and cable bolts. The ribs provide additional strength to the 5mm material, enabling the plate to carry loads in excess of 200kN – therefore eliminating the need to use an 8mm dome plate.
Duplex Franklin Plate The Duplex plate is a 5mm thick Franklin plate welded to a 1.9mm thick 300 x 280mm strata plate, the pressed rib sections in the 1.9mm material provide additional strength and minimise deformation upon installation. The Duplex plate gives greater surface coverage when supporting strata-mesh or when used directly on rock surface. User friendly round edges for increased safety and mesh protection.
Dome Plates Dome plates are primarily used when increased load capacity is required. It is the dome shape of this 150 x 8mm general purpose plate that increases the load capacity. Dome plates are primarily used in conjunction with domed barrel and wedge or a dome ball washer in the installation of solid bolts and cable bolts. Fero can also supply Dome plates in a range of thickness and size as per customer requests.
Flat Plates Available in standard sizes of 8-12mm thick and from 150mm to 300mm, with 22mm hole diameter and either one, two or slot holes for tensioning, this general purpose plate is used with flat barrel and wedges in cable bolt installations. Fero can also supply flat plates in a range of thickness and size as per customer requests.
![Page 41: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/41.jpg)
39www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
3.0 Physical Properties, Product Codes, Weights & Pack Sizes
Fero Product Code
Fero Product Description
Hole Diameter (mm)
Length x Width (mm)
Material Thickness (mm)
Surface Finish
Weight Each (kg)
Pack Size
Pack Weight (kg)
FSP1504-33 150 Stabiliser Plate (33) 35.5 150x150 4 Un-Treated 0.72 1200 865
FSP1504-33G 150 Stabiliser Plate (33) - HDG 35.5 150x150 4 Hot Dip Galvanised 0.78 1200 930
FSP1504-39 150 Stabiliser Plate (39) 42.5 150x150 4 Un-Treated 0.72 1200 865
FSP1504-39G 150 Stabiliser Plate (39) - HDG 42.5 150x150 4 Hot Dip Galvanised 0.78 1200 930
FSP1504-47 150 Stabiliser Plate (47) 49.5 150x150 4 Un-Treated 0.72 1200 865
FSP1504-47G 150 Stabiliser Plate (47) - HDG 49.5 150x150 4 Hot Dip Galvanised 0.78 1200 930
FSP2004-47 200 Stabiliser Plate (47) 49.5 200x200 4 Un-Treated 1.22 750 915
FSP2004-47G 200 Stabiliser Plate (47) - HDG 49.5 200x200 4 Hot Dip Galvanised 1.36 750 1020
FSP2254-33 225 Stabiliser Plate (33) 35.5 225x225 4 Un-Treated 1.62 600 970
FSP2254-33G 225 Stabiliser Plate (33) - HDG 35.5 225x225 4 Hot Dip Galvanised 1.70 600 1020
FSP2254-39 225 Stabiliser Plate (39) 42.5 225x225 4 Un-Treated 1.62 600 970
FSP2254-39G 225 Stabiliser Plate (39) - HDG 42.5 225x225 4 Hot Dip Galvanised 1.70 600 1020
FSP2254-45G 225 Stabiliser Plate (45) - HDG 48 225x225 4 Hot Dip Galvanised 1.70 600 1020
FSP2254-47 225 Stabiliser Plate (47) 49.5 225x225 4 Un-Treated 1.62 600 970
FSP2254-47G 225 Stabiliser Plate (47) - HDG 49.5 225x225 4 Hot Dip Galvanised 1.70 600 1020
Fero Product Code
Fero Product Description
Hole Diameter (mm)
Length x Width (mm)
Material Thickness (mm)
Surface Finish
Weight Each (kg)
Pack Size
Pack Weight (kg)
FDP15008 150 Dome Plate x 8mm (32) 32 150x150 8 Un-Treated 1.52 600 910
FDP15008G 150 Dome Plate x 8mm (32) - HDG 32 150x150 8 Hot Dip Galvanised 1.56 600 935
FDP20008 200 Dome Plate x 8mm (32) 32 200X200 8 Un-Treated 2.55 400 1020
FDP200084 200 Dome Plate x 8mm (32) - HDG 32 200x200 8 Hot Dip Galvanised 2.76 400 1105
Stabiliser Plates
Dome Plates
![Page 42: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/42.jpg)
40 www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
Fero Product Code
Fero Product Description
Hole Diameter (mm)
Length x Width (mm)
Material Thickness (mm)
Surface Finish
Weight Each (kg)
Pack Size
Pack Weight (kg)
FFP1500822-1 150 Flat Plate x 8mm (22), 1 Hole 1 x 22 150x150 8 Un-Treated 1.42 1000 1415
FFP1500822-2 150 Flat Plate x 8mm (22), 2 Holes 2 x 22 150x150 8 Un-Treated 1.42 1000 1415
FFP1501022-1 150 Flat Plate x 10mm (22), 1 Hole 1 x 22 150x150 10 Un-Treated 1.79 700 1250
FFP1501022-1G 150 Flat Plate x 10mm (22), 1 Hole - HDG 1 x 22 150x150 10 Hot Dip Galvanised 1.79 700 1255
FFP1501022-2 150 Flat Plate x 10mm (22), 2 Holes 2 x 22 150x150 10 Un-Treated 1.79 700 1255
FFP1501022-2G 150 Flat Plate x 10mm (22), 2 Holes - HDG 2 x 22 150x150 10 Hot Dip Galvanised 1.88 700 1315
FFP1501222-1 150 Flat Plate x 12mm (22), 1 Hole 1 x 22 150x150 12 Un-Treated 2.14 700 1500
FFP15012SL-1 150 Flat Plate x 12mm Slot Hole 1 x Slot Hole 150x150 12 Un-Treated 2.14 700 1500
FFP2000822-1 200 Flat Plate x 8mm (22), 1 Hole 1 x 22 200x200 8 Un-Treated 2.55 500 1275
FFP2000822-1G 200 Flat Plate x 8mm (22), 1 Hole - HDG 1 x 22 200x200 8 Hot Dip Galvanised 2.76 500 1380
FFP2000822-2 200 Flat Plate x 8mm (22), 2 Holes 2 x 22 200x200 8 Un-Treated 2.55 500 1275
FFP2000822-2G 200 Flat Plate x 8mm (22), 2 Holes - HDG 2 x 22 200x200 8 Hot Dip Galvanised 2.76 500 1380
FFP2001022-1 200 Flat Plate x 10mm (22), 1 Hole 1 x 22 200x200 10 Un-Treated 3.17 500 1585
FFP2001022-1G 200 Flat Plate x 10mm (22), 1 Hole - HDG 1 x 22 200x200 10 Hot Dip Galvanised 3.53 500 1765
FFP2001022-2 200 Flat Plate x 10mm (22), 2 Holes 2 x 22 200x200 10 Un-Treated 3.17 500 1585
FFP2001022-2G 200 Flat Plate x 10mm (22), 2 Holes - HDG 2 x 22 200x200 10 Hot Dip Galvanised 3.53 500 1765
FFP2500822-1 250 Flat Plate x 8mm (22), 1 Hole 1 x 22 250x250 8 Un-Treated 3.96 500 1980
FFP2501022-1 250 Flat Plate x 10mm (22), 1 Hole 1 x 22 250x250 10 Un-Treated 4.95 400 1980
FFP2501022-2 250 Flat Plate x 10mm (22), 2 Holes 2 x 22 250x250 10 Un-Treated 4.95 400 1980
FFP3000822-1 300 Flat Plate x 8mm (22), 1 Hole 1 x 22 300x300 8 Un-Treated 5.72 300 1715
FFP3001022-1 300 Flat Plate x 10mm (22), 1 Hole 1 x 22 300x300 10 Un-Treated 7.18 200 1435
FFP3001022-2 300 Flat Plate x 10mm (22), 2 Holes 2 x 22 300x300 10 Un-Treated 7.18 200 1435
Fero Product Code
Fero Product Description
Hole Diameter (mm)
Length x Width (mm)
Material Thickness (mm)
Surface Finish
Weight Each (kg)
Pack Size
Pack Weight (kg)
FFRP1504-43 150 Franklin Plate (43) 39 150x150 4 Un-Treated 0.72 1200 865
FFRP1504-439 150 Franklin Plate 43 150x150 4 Hot Dip Galvanised 0.78 1200 930
FFRP1505-43 150 Franklin Plate (43) 43 150x150 5 Un-Treated 0.90 1200 1085
FFRP1505-434 150 Franklin Plate (43)-HDG 43 150x150 5 Hot Dip Galvanised 0.97 1200 1165
Flat Plates
Franklin Plates
![Page 43: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/43.jpg)
41www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
Fero Product Code
Fero Product Description
Hole Diameter (mm)
Length x Width (mm)
Material Thickness (mm)
Surface Finish
Weight Each (kg)
Pack Size
Pack Weight (kg)
FSP324-50 300 Strata Plate x 240 (50) 50 300x240 1.9 Un-Treated 1.17 700 820
FSP324-50G 300 Strata Plate x 240 (50) - HDG 50 300x240 1.9 Hot dip Galvanised 1.25 700 875
FSP324-50PG 300 Strata Plate 240 (50) - Galv 50 300x240 1.9 Galvanised 1.17 700 820FSP328-50 300 Strata Plate (50) 50 300x280 1.9 Un-Treated 1.28 700 895FSP328-50PG 300 Strata Plate (50) - Galv 50 300x280 1.9 Hot dip Galvanised 1.28 700 895
FSP328-50G 300 Strata Plate (50) - HDG 50 300x280 1.9 Galvanised 1.36 700 955
Strata Plates
Fero Product Code
Fero Product Description
Hole Diameter (mm)
Length x Width (mm)
Material Thickness (mm)
Surface Finish
Weight Each (kg)
Pack Size
Pack Weight (kg)
Top Bottom Top Bottom
FDSP32815-33300 Duplex Stabiliser Plate (33)
35.5 150 x 150 300 x 280 4 1.9 Un-Treated 2.03 300 610
FDSP32815-33G300 Duplex Stabiliser Plate (33) - HDG
35.5 150 x 150 300 x 280 4 1.9 Hot dip Galvanised 2.13 300 640
FDSP32815-39300 Duplex Stabiliser Plate (39)
42.5 150 x 150 300 x 280 4 1.9 Un-Treated 2.03 300 610
FDSP32815-39G300 Duplex Stabiliser Plate (39) - HDG
42.5 150 x 150 300 x 280 4 1.9 Hot dip Galvanised 2.13 300 640
FDSP32815-47300 Duplex Stabiliser Plate (47)
49.5 150 x 150 300 x 280 4 1.9 Un-Treated 2.03 300 610
FDSP32815-47G300 Duplex Stabiliser Plate (47) - HDG
49.5 150 x 150 300 x 280 4 1.9 Hot dip Galvanised 2.13 300 640
FDDP328158-32300 Duplex Dome Plate (32)
32 150 x 150 300 x 280 8 1.9 Un-Treated 2.72 300 815
FDDP328158-32G300 Duplex Dome Plate (32) - HDG
32 150 x 150 300 x 280 8 1.9 Hot dip Galvanised 2.90 300 870
FDFP328154-43300 Duplex Franklin Plate (43)
43 150 x 150 300 x 280 4 1.9 Un-Treated 2.03 300 610
FDFP328154-43G300 Duplex Franklin Plate (43) - HDG
43 150 x 150 300 x 280 4 1.9 Hot dip Galvanised 2.13 300 640
Duplex Plates
![Page 44: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/44.jpg)
42
www.fero.com.au
![Page 45: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/45.jpg)
Fero Strata Mesh and Strap are designed to provide additional underground surface support when rock bolting.
A Division of Fero Group
2.2 Strata Mesh & Strap
![Page 46: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/46.jpg)
44 www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
Strata Mesh, Strap and W-Strap are used in conjunction with friction stabilisers and other rock bolts to provide additional coverage in ground conditions where bolts and support plate cover is not sufficient. The ability to overlap the products enables continuous coverage of the rock surface.
Fero Strata Mesh is manufactured in house at our Perth and Brisbane manufacturing facilities using the latest in electric resistance welding technology. This enables Fero to manufacture Strata Mesh up to 6 metres in length and 2.4 metres wide, and to customise product in a range of configurations to assist in optimising bolting patterns. The mesh is manufactured with minimal overhang of line and cross wires to eliminate material handling injuries on site.
Strata Strap is used in conjunction with friction stabilisers and rock bolts to provide additional ground support by increasing the area of support provided and conforming to major irregularities in the rock. Fero’s strata strap range includes W-Strap and Strata Mesh Strap, which was developed as an alterantive to conventional W-Strap whereby the wire construction allows for simpler hole alignment. Strata Mesh Strap can also be supplied with an arch for use in shotcreting of pillars.
To ensure a consistently high quality product, Strata Mesh is weld-shear tested in-house every 300 sheets and torque tested every 50 sheets.
Strata Mesh and strap are available in untreated steel, pre-galvanised or hot-dip galvanised.
Contact the Fero Strata team for more information at [email protected]
1.0 Strata Mesh & Strata Strap Fero Strata Mesh, Strata Strap and W-Strap are designed to provide a safer work environment by ensuring the surface support of the underground mine or tunnel.
1.1 Features
Provides a safer work environment
Manufactured in a comprehensive range of spacing configurations to optimise bolting patterns
Quality tested to the highest standards in-house
Available untreated steel, pre-galvanised and hot dip galvanised
Provides continuous coverage
Strata Mesh is turned and stacked providing more compact packs for efficient transport
![Page 47: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/47.jpg)
45www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
1.2 Strata Mesh Range
1.3 Strata Strap Range
Fero Strata manufactures and supplies a variety of Strata Mesh products appropriate for a range of ground conditions. Strata Mesh is available in a range of wire diameter and crosswire apertures and can be custom produced to suit specific site requirements.
Strata Mesh can be manufactured and supplied as pre-treated galvanised product to assist in the protection of the mesh in corrosive environments. Black Strata Mesh, also known as ‘Bright’ is a more cost effective product, however it does not offer the same level of protection in corrosive environments. With an additional anti-corrosive aluminium coating, Innogal mesh provides a higher level of protection in highly corrosive environments.
Contact the Fero Strata Team for further details.
Fero Strata manufactures and supplies a variety of StrataMesh products appropriate for a range of ground conditions. Strata-mesh is available in a range of diameter wire and crosswire apertures and can be custom produced to suit specific site requirements.
StrataMesh can be manufactured and supplied as pre-treated galvanised product to assist in the protection of the mesh in corrosive environments. Black StrataMesh, also known as ‘Bright’ is a more cost effective product. However, it does not offer the same level of protection in corrosive environments. With an additional anti-corrosive aluminium coating, Innogal provides a higher level of protection in highly corrosive environments.
Contact the Fero Strata team for further details.
Strata Mesh & Strap Strata Mesh is primarily used in conjunction with rock bolts when additional support is required in underground mining and tunnelling. The mesh straps are pulled into the rock surface by rock bolts and conform to irregularities in the rock. Ranging from 4-8mm diameter linewire and crosswire with standard 100 x 100 apertures, Strata Mesh can be customised to suit specific mine site requirements. The wire construction method of the strap allows greater flexibility in hole alignment and fit to the irregularities with the rock surface. Can be supplied in bright wire, galvanised or hot dip galvanised coatings
W-Strap Fero W-Strap is rolled from 1.9mm steel coil and shaped to form a ‘W’ with multi-holes spaced 300mm apart. The W shape of the strap grips the rock surface and increases the area of support when used in conjunction with rock bolts. W-Strap is supplied in standard lengths of 2.4m, 3m and 6m with other lengths available on request and can be supplied in un-treated pre-galvanised or Hot Dip Galvanised coatings.
Chain Link Mesh Chain link mesh offers an economical and durable solution for underground surface support. Fero offers chain link mesh in a standard galvanised finish in a variety of continuous roll size configurations to suit specific mine requirements. Standard widths include 1.8 and 2.4m and standard length rolls 10m, 15m and 20m.
![Page 48: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/48.jpg)
46 www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
The ground support mesh manufactured and supplied by Fero Strata for both domestic and international mining markets is manufactured under strict controlled conditions to meet the stringent requirements of mining ground support applications.
The ground support mesh manufactured at Fero is subjected to rigorous in-house testings (refer to table below). These tests are conducted at our Western Australian based Laboratory located at our Kewdale facility as well as periodic testing at NATA accredited laboratories, ensuring compliance is met and maintained.
2.0 Physical/Technical Properties & Testing
Test Type On-Line Test Off-Line Test
Calibrated or Non-Calibrated Spanner Test
Weld Shear Strength
Frequency 50 sheets 300 sheets
Mesh Type Min. Torque Value (all welds on one cross wire)
Min. Shear value kN
FSG224, FSB224, FSG234 20 5.0
FSG445, FSB445 35 8.0
FSG445A, FSB445A 40 9.5
FSSB448, FSSHDG448 50 23.0
Ground Support Mesh Testing Program
Strata Mesh & Strap
Galvanised TYPICAL
Strata Mesh & Strap Bright
TYPICAL
Mechanical Properties
Yield Strength of Wire (MPa) 350 450
Tensile Strength of Wire (MPa) 550 500
![Page 49: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/49.jpg)
47www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
3.0 Product Codes, Weights & Pack Sizes
Strata Mesh Product Code IdentificationMesh Type
Coating Finish
Line Wire Spacing
Cross Wire Spacing
Wire Diameter
Mesh Length
Mesh Width
FS - StrataMesh B - Bright Wire (Untreated) 2 - 2” or 50mm 2 - 2” or 50mm 4 - 4mm 30 - 3000m 17 - 1700mm
FR - Reinforcing Mesh G - Galvanised (Pre-Galvanised Wire) 3 - 3” or 75mm 3 - 3” or 75mm 5 - 5mm 40 - 4000mm 24 - 2400mm
HDG - Hot Dip Galvanised 4 - 4” or 100mm 4 - 4” or 100mm 5A - 5.6mm 45 - 4500mm
8 - 8mm 60 - 6000mm
FS Mesh Type
G Coating Finish
4 Line Wire Spacing
4 Cross Wire Spacing
5A Wire Diameter
30 Mesh Length
24 Mesh Width
Example FSG445A3024 - Strata Mesh 3000 x 2400 x 5.6mm - Galv
Fero Product Code
Fero Product Description
Strata Mesh Size (length x width) (mm)
Surface Finish
Weight /Sheet (kg)
Pack Size
Pack Weight (kg)
FSB4456017 Strata Mesh 6000 x 1700 x 5mm 6000 x 1700 Bright Wire 33 50 1650
FSB4453024 Strata Mesh 3000 x 2400 x 5mm 3000 x 2400 Bright Wire 23 50 1150
FSB4454024 Strata Mesh 4000 x 2400 x 5mm 4000 x 2400 Bright Wire 31 50 1550
FSB4454524 Strata Mesh 4500 x 2400 x 5mm 4500 x 2400 Bright Wire 35 50 1750
FSB4456024 Strata Mesh 6000 x 2400 x 5mm 6000 x 2400 Bright Wire 46 50 2300
FSG4454017 Strata Mesh 4000 x 1700 x 5mm - Galv 4000 x 1700 Galvanised Wire 22 50 1100
FSG4454517 Strata Mesh 4500 x 1700 x 5mm - Galv 4500 x 1700 Galvanised Wire 25 50 1250
FSG4456017 Strata Mesh 6000 x 1700 x 5mm - Galv 6000 x 1700 Galvanised Wire 33 50 1650
FSG4453024 Strata Mesh 3000 x 2400 x 5mm - Galv 3000 x 2400 Galvanised Wire 23 50 1150
FSG4454024 Strata Mesh 4000 x 2400 x 5mm - Galv 4000 x 2400 Galvanised Wire 31 50 1550
FSB445A3024 Strata Mesh 3000 x 2400 x 5.6mm 3000 x 2400 Bright Wire 29 50 1450
FSB445A3624 Strata Mesh 3600 x 2400 x 5.6mm 3600 x 2400 Bright Wire 35 50 1750
FSB445A4024 Strata Mesh 4000 x 2400 x 5.6mm 4000 x 2400 Bright Wire 39 50 1950
FSG445A3017 Strata Mesh 3000 x 1700 x 5.6mm - Galv 3000 x 1700 Galvanised Wire 21 50 1050
FSG445A4017 Strata Mesh 4000 x 1700 x 5.6mm - Galv 4000 x 1700 Galvanised Wire 28 50 1400
FSG445A4517 Strata Mesh 4500 x 1700 x 5.6mm - Galv 4500 x 1700 Galvanised Wire 31 50 1550
FSG445A5817 Strata Mesh 5800 x 1700 x 5.6mm - Galv 5800 x 1700 Galvanised Wire 40 50 2000
FSG445A6017 Strata Mesh 6000 x 1700 x 5.6mm - Galv 6000 x 1700 Galvanised Wire 41 50 2050
FSG445A3024 Strata Mesh 3000 x 2400 x 5.6mm - Galv 3000 x 2400 Galvanised Wire 29 50 1450
FSG445A3524 Strata Mesh 3500 x 2400 x 5.6mm - Galv 3500 x 2400 Galvanised Wire 34 50 1700
FSG445A3624 Strata Mesh 3600 x 2400 x 5.6mm - Galv 3600 x 2400 Galvanised Wire 35 50 1750
FSG445A3824 Strata Mesh 3800 x 2400 x 5.6mm - Galv 3800 x 2400 Galvanised Wire 37 50 1850
Strata Mesh & Strata Strap
![Page 50: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/50.jpg)
48 www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
Fero Product Code
Fero Product Description
Chain Link Mesh Size (length x width) (mm)
Surface Finish
Wire Diameter (mm)
FCLWMG3A3004 Chain Link Wire Mesh 30 Mtrs x 4 Mtrs x 3.15mm - Galv 30000 x 4000 Galvanised Wire 3.15mm
Chain Link Mesh
Fero Product Code
Fero Product Description
W-Strap Size (length x width) (mm)
Surface Finish
Material Thickness (mm)
Hole Size (mm)
Weight /Strap (kg)
Pack Size
Pack Weight (kg)
FWS280-2400 W-Strap 280 x 2400 (50) 280 x 2400 Un-Treated 1.9 50 10.9 50 545
FWS280-2400G W-Strap 280 x 2400 (50) - HDG 280 x 2400 Hot Dip Galvanised 1.9 50 11.8 50 590
FWS280-2400PG W-Strap 280 x 2400 (50) - Galv 280 x 2400 Galvanised 1.9 50 10.9 50 545
FWS280-3000 W-Strap 280 x 3000 (50) 280 x 3000 Un-Treated 1.9 50 13.6 50 680
FWS280-3000G W-Strap 280 x 3000 (50) - HDG 280 x 3000 Hot Dip Galvanised 1.9 50 14.7 50 735
FWS280-3000PG W-Strap 280 x 3000 (50) - Galv 280 x 3000 Galvanised 1.9 50 13.6 50 680
FWS280-3600G-S W-Strap 280 x 3600 (Slot Hole) - HDG 280 x 3600 Hot Dip Galvanised 1.9 300 x 50 17.7 50 885
FWS280-3600-S W-Strap 280 x 3600 (Slot Hole) 280 x 3600 Un-Treated 1.9 300 x 50 16.4 50 820
FWS280-6000 W-Strap 280 x 6000 (50) 280 x 6000 Un-Treated 1.9 50 27.3 50 1365
FWS280-6000G W-Strap 280 x 6000 (50) - HDG 280 x 6000 Hot Dip Galvanised 1.9 50 29.5 50 1475
FWS280-6000PG W-Strap 280 x 6000 (50) - Galv 280 x 6000 Galvanised 1.9 50 27.3 50 1365
FWS280-6000PG-S W-Strap 280 x 6000 (Slot Hole) - Galv 280 x 6000 Galvanised 1.9 300 x 50 27.3 50 1365
FWS280-3600PG W-Strap 280 x 3600 (50) - Galv 280 x 3600 Galvanised 1.9 50 16.4 50 820
FWS280-3600PG-S W-Strap 280 x 3600 (Slot Hole) - Galv 280 x 3600 Galvanised 1.9 300 x 50 16.4 50 820
W-Strap
Fero Product Code
Fero Product Description
Strata Mesh Size (length x width) (mm)
Surface Finish
Weight /Sheet (kg)
Pack Size
Pack Weight (kg)
FSG445A4024 Strata Mesh 4000 x 2400 x 5.6mm - Galv 4000 x 2400 Galvanised Wire 39 50 1950
FSG445A4224 Strata Mesh 4200 x 2400 x 5.6mm - Galv 4200 x 2400 Galvanised Wire 41 50 2050
FSG445A4524 Strata Mesh 4500 x 2400 x 5.6mm - Galv 4500 x 2400 Galvanised Wire 44 50 2200
FSG445A5824 Strata Mesh 5800 x 2400 x 5.6mm - Galv 5800 x 2400 Galvanised Wire 56 50 2800
FSG445A6024 Strata Mesh 6000 x 2400 x 5.6mm - Galv 6000 x 2400 Galvanised Wire 58 50 2900
FSSHDG4482403 Strata Mesh Strap 2400 x 300 x 8mm - HDG 2400 x 300 Hot Dip Galvanised 8 25 200
FSSHDG4483504 Strata Mesh Strap 3500 x 400 x 8mm - HDG 3500 x 400 Hot Dip Galvanised 13 25 325
FSSHDG4486004 Strata Mesh Strap 6000 x 400 x 8mm - HDG 6000 x 400 Hot Dip Galvanised 22 25 550
FSSHDG4C64860045 Strata Mesh Strap 6000 x 450 x 8mm c/w Cntr app 150 - HDG 6000 x 450 Hot Dip Galvanised 25 25 625
FSSAB445200030D18 Strata Mesh Strap Arch 2000 x 300 x 5mm, Depth 180mm 2000 x 300 Bright Wire 3 25 75
FSSAG445200030D18 Strata Mesh Strap Arch 2000 x 300 x 5mm, Depth 180mm - HDG 2000 x 300 Hot Dip Galvanised 4 25 100
Strata Mesh & Strata Strap
![Page 51: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/51.jpg)
49www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
Strata Mesh Size (Length x Width) FERO ID Colour3000mm x 1700mm Fero4000mm x 1700mm Fero4500mm x 1700mm Fero5800mm x 1700mm Fero6000mm x 1700mm Fero3000mm x 2400mm Fero3500mm x 2400mm Fero3600mm x 2400mm Fero3800mm x 2400mm Fero4000mm x 2400mm Fero4200mm x 2400mm Fero4500mm x 2400mm Fero6000mm x 2400mm Fero
Fero Strata Mesh Colour ID
![Page 52: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/52.jpg)
50
www.fero.com.au
![Page 53: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/53.jpg)
Fero Strata’s cementitious grout range can be used to secure solid bolts and cable bolts as well as general strata injection and consolidation applications.
A Division of Fero Group
3.1 Specialised Grouts
![Page 54: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/54.jpg)
52 www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
1.1 FeaturesFero’s Strata’s cementitious grout range includes products suitable for manual and mechanised bolt grouting and backfilling and cavity filling.
High Yield Grout not only provides a high volume yield, it is easy to mix and place and rapid setting provides a quick seal. While Fero Strata Cable Bolt Grout S is a thixotropic grout providing a high strength and long life product.
Cement based anchoring grouts should be mixed with potable water and should be stored in original packaging in dry conditions. High temperature or humidity may reduce the shelf-life.
Fero Strata grout anchoring products are manufactured to meet Australian mining industry requirements.
Our technical service team has extensive knowledge and experience in grout anchoring products and their applications and are available to provide technical and product advice to suit strata conditions.
Contact the Fero Strata team for more information at [email protected]
1.0 Specialised Grouts Specialised grouts are used in the underground mining industry for a variety of applications from securing bolts through to consolidation of rock.
High performance
Safe and reliable
Ready to use
Able to be tested in situ
Packaged 20 Kg bags or 1.2 ton bulker bags
![Page 55: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/55.jpg)
53www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
1.2 Product Range
Advantages
Easy to mix and placeHigh volume yield Rapid gelling providing quick seals Lightweight - reducing stress concentration in strataCohesive - easily pumped without segregation Shrinkage compensated – ensures good adhesion to substrate.Provides superior long term stability.Provides high early compression strength
High Yield Grout High Yield Grout is a durable, low density high yield cementitious pumpable grout suitable for a number of different mining and civil applications including back filling, cavity filling, seals and stoping. Fero Strata grout products should be mixed with potable water. Grouts should be stored in original packaging in dry conditions, as high temperature or humidity may reduce shelf life.
Advantages
Excellent pumping ability Thixotropic properties, restricts flow to surrounding areas.Economical, low wastage High ultimate strength and durability ensure long term life Working time more than one hour at 20°C making cleaning of pumps and hoses easyVery good bond to steel
Fero Strata Cable Bolt Grout S is a thixotropic grout used to anchor cable bolts and other rock bolts in top down grouting of long tendons.
The low viscosity of the product restricts flow to surrounding areas ensures low wastage, but maintains excellent pumping properties. Providing a good bond to steel the product provides a high ultimate strength and durability to ensure a long life.
![Page 56: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/56.jpg)
54 www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
2.0 Physical & Technical Properties
2.1 High Yield Grout
The strength and density of the grout is determined by the powder to water ratio. In general terms, the lower the water to powder ratio the higher the compressive strength, density and durability of the grout.
It is recommended that laboratory and field testing is undertaken to determine optimum yield as results can be affected by variables such as the type of pump used, its efficiency and the rate of pumping; water content and quality; ambient temperature; volume of grout placed and placing techniques.
Mixing and Placement Fero Strata recommends high yield grout be mixed and placed with suitable grout mixing and pumping equipment.
Any regulation of the pump must be done prior to and during filling to ensure uniformity of the product.
Product Form Water: Powder Ratio 2:1 1.5:1 1:1
High Yield Grout High Yield Grout 1000 Powder Fresh Wet Density, kg/m3 1200 1300 1400
Approx Yield, 20kg bags/m3 20 26 35
Approx Gel Time @25ºC 7 - 10 5 - 7 3 - 5
Compressive Strength (50mm cubes air cured @25ºC)
Age (days) Typical (MPa)
1 day 1.5 4 8
7 days 2.5 6 15
28 days 6 14 25
![Page 57: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/57.jpg)
55www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
Mixing and Placing Cable Bolt Grout S is a ready to use powder requiring only the addition of clean potable water. The water to powder ratio is determined by the desired grout consistency. An average guide is 7-8 litres of water per 20kg bag. Avoid using excess water and discard material that has been left standing for more than an hour.
When placing, the grout is pumped into the filling tube until the bore hole is completely filled, encasing the cable or rock bolt.
Any remaining grout should be removed from tools, pump and lines immediately after use with clean water.
2.2 Fero Strata Cable Bolt Grouts
The thixotropic qualities of the product restrict flow to surrounding areas, ensuring low wastage, and it offers the advantage of providing excellent pumping ability.
A working time of more than one hour at 20°C makes the cleaning of the pump and hose easy.
Product Form Age vs Compressive Strength - 20kgs powder: 8lts water
High Yield Grout Cablebolt Grout S1000 Powder 4hrs 1Mpa 1day 25Mpa
6hrs 4Mpa 7days 55Mpa
8hrs 8Mpa 28days 75Mpa
Product Code Product Description Pack Size Pack weight (Kg)
FHYG1000-20 High Yield Grout 1000 (20 Kg) 20Kg Bag 20
FHYG1000-1200 High Yield Grout 1000 (1200 Kg) 1.2 Tonne Bulk Bag 1200
FCGS1000-20 Cablebolt Grout S1000 (20 Kg) 20Kg Bag 20
3.0 Product Codes, Weights & Pack Size
![Page 58: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/58.jpg)
56
www.fero.com.au
![Page 59: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/59.jpg)
Shotcrete admixtures work to alter the viscosity of cementitious materials to provide flexibility when shotcreting.
A Division of Fero Group
3.2 Shotcrete Admixtures
![Page 60: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/60.jpg)
58 www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
Accelerators reduce the time of the shotcrete curing process and make spraying of concrete on vertical and overhead surfaces possible. Rapid setting assists with early strength development and maximises the performance of this form of ground support. Shotcrete stabilisers extend the useful life of the shotcrete and plasticisers are added when water reduction characteristics are required.
Fero supplies a range of shotcrete admixture products including accelerators, stabiliser, plasticiser and mix enhancer to meet the demands of the mining and construction industries. All shotcrete admixtures are supplied in liquid form.
All Fero Strata products are manufactured to the highest quality and our admixture products are no different, with Fero Strata Shotcrete Admixtures made in accordance with AS1478.
Our technical service team has extensive knowledge and experience in shotcrete admixtures and is available to provide technical and product advice and can conduct site trials to determine the correct dosage required to suit strata conditions.
Contact the Fero Strata team for more information at [email protected]
Shotcrete Admixtures Chemical admixtures have been used in the Australian underground mining industry and tunnelling since the 1990’s.
1.0 Product Range
Accelerators
AF2000 Suitable for both mining and tunnelling applications, AF 2000 is a high quality alkali free liquid accelerator for shotcrete systems, used to secure and stabilise the strata in underground construction.
AF3000 Suitable for both mining and tunnelling applications, AF 3000 is a high performance alkali free liquid accelerator for shotcrete systems, used to secure and stabilise the strata in underground construction.
![Page 61: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/61.jpg)
59www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
Features
Long shelf life Alkali free No agitation required Rapid acceleration assists with high early strength Reduces rebound Improves bond when sprayed overhead Suitable for use with wet substrates Appearance translucent
Application details It is recommended AF 2000 be applied using an Accelerator dosing unit. Wash down substrate either with hydro-scaler or high-pressure hose. Ensure that dust and all loose debris have been removed prior to application.
Shotcrete Mix Enhancer
Shotcrete Mix mls per m3
Poorly graded aggregates 300-1000mls
For improved pump-ability 1000-2000mlsTo replace silica fume 2000-5000mls
Application details It is recommended that site trials be undertaken to determine the correct dose rate required as dosage rate can range from 1-5 litres per cubic metre depending on requirements.
ME2000 ME2000 is a unique liquid polymer chemical admixture specifically designed for use in pre-mixed wet shotcrete. ME2000 enhances the mix by increasing the stickiness of the shotcrete and making it more cohesive, which reduces rebound and assists when spraying overhead. The density of the product is approximately 1kg per litre at 23 degrees Celsius.
![Page 62: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/62.jpg)
60 www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
Shotcrete Stabiliser
Application details Add the required dose of ST2000 to the shotcrete mix with the head water at the batch plant. Ensure product is distributed evenly in the shotcrete mix.
It is important to note that ST2000 should be added prior to adding any plasticisers.
ST2000 Fero Strata ST2000 is a liquid admixture that suspends the cement hydration process in shotcrete; thereby extending the shotcrete’s useful life without effecting performance. ST2000 enables the hydration process to be reactivated several hours or even days later, allowing on-site transportation and flexibility.
Features
Chloride free Suitable for wet shotcrete applications Hydration process can be re-activated from 3 – 72 hours Following initial application Extends useable life of shotcrete to allow for work interruptions Provides for flexible delivery and application options Will not affect the quality of the concrete when mixed and applied correctly
Features
Produces a high quality, high flow cohesive shotcrete mix Enables mixing water to be reduced significantly Provides high early strength gain of shotcrete Allows for quicker placement and reduced curing times
Shotcrete Super Plasticiser
Application details The dosage rate of SP2000 depends largely on the extent of flow and water reduction required. In general, SP2000 should be added at approximately 400 - 1000mls per 100kg of cementitious material.
It is recommended that on-site trials be undertaken to determine correct dosage rate.
SP2000 SP2000 is a ready to use liquid high range water reducer commonly known as Super plasticiser for use in shotcrete. SP2000 can be used for all pre-mixed shotcrete where high flow ability and water reduction characteristics are required. SP2000 is suitable for tunnel linings and underground mining applications. It is also suitable for concrete in civil works.
![Page 63: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/63.jpg)
61www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
2.0 Physical & Technical Properties
Product Form Density PH Value Appearance Dose
Accelerators
Shotcrete Accelerator AF 2000 Liquid 1.35 kg/Ltr Alkali Free Translucent 4% - 6% by weight of cement
Shotcrete Accelerator AF 3000 Liquid 1.4 kg/Ltr Alkali Free Translucent 4% - 6% by weight of cement
Stabiliser
Shotcrete Stabiliser ST 2000 Liquid 1.1 kg/m3* 3** Red 200 - 2000 mls per 100 kg of cementitious material
Plasticiser
Shotcrete SP 2000 Liquid 1.2 kg/m3* 8 - 10** Clear Brown 40 - 100 mls per 100kg of cementitious material
Mix Enhancer
Shotcrete SP 2000 Liquid 1.0 kg/m3* 8.5** Light Green 40 - 100 mls per 100kg of cementitious material
* Density @ 23oC ** PH Value @ 23oC
3.0 Product Codes, Weights & Pack Sizes
Fero Product Code
Fero Product Description
Pack Size
Pack Weight (kg)
FSAAF2000-1000 Shotcrete Accelerator AF 2000 (1000 Ltrs) 1000 Ltr Pallecon 1380
FSAAF2000-L Shotcrete Accelerator AF 2000 (Bulk Ltrs) Bulk Delivery per Litre 1.35
FSAAF3000-1000 Shotcrete Accelerator AF 3000 (1000 Ltrs) 1000 Ltr Pallecon 1430
FSAAF3000-L Shotcrete Accelerator AF 3000 (Bulk Ltrs) Bulk Delivery per Litre 1.4
FSS2000-1000 Shotcrete Stabiliser ST 2000 (1000 Ltrs) 1000 Ltr Pallecon 1260
FSSP2000-1000 Shotcrete SP 2000 (1000 Ltrs) 1000 Ltr Pallecon 1160
FSME2000-1000 Shotcrete ME 2000 (1000 Ltrs) 1000 Ltr Pallecon 1160
![Page 64: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/64.jpg)
62
www.fero.com.au
![Page 65: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/65.jpg)
Fero manufactures and supplies a comprehensive choice of accessories to complement our range of ground support products.
A Division of Fero Group
4.0 Accessories
![Page 66: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/66.jpg)
64 www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
As an integrated division of the larger Fero Group, Fero Strata provides the competitive advantage of a single supply chain including specialised and customised steel manufacturing and anti-corrosion service divisions.
In addition to a complete range of steel ground support products, Fero Strata also provides an extensive and complementary range of accessories. Our technical services team is available to provide advice and operator training for any of our product range.
Contact the Fero Strata team for more information at [email protected]
1.0 Product Range
1.0 Overview Fero Strata is a leading manufacturer and supplier of ground support products and accessories to the Australian underground mining industry.
Fero Strata manufactures and supplies a comprehensive range of ground support accessories to suit a variety of ground types and conditions. It is recommended that Fero Strata accessories are used with Fero Strata products.
Our comprehensive range includes:
1.1 Driver Tools Fero supplies a full range of purpose designed driver tools, to install friction stabilisers, wriggle bolts, thread bar and other specialty bolts, for use with both mechanised and hand-held bolting equipment. Threading meets Australian Standards AS1275. Fero Driver Tools are supplied loose per unit. Other packing quantities are available on request.
1.1.1 Driver Tools for Fero Friction Stabilisers include:
33mm Stabiliser Driver ToolThe 33mm stabiliser driver tool fits directly into the chuck of the air leg rock drill and is available in male and female configurations to suit the 22mm hex adaptor.
39mm & 47mm Stabiliser Driver Tools Our 39 or 47mm stabiliser driver tools are attached to the rock drill by a spiral bar. This allows the stabiliser driver tool to extend past the front centraliser for ease of installation of friction stabilisers. These are available in a R38 or T38 thread.
![Page 67: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/67.jpg)
65www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
Driver Tools Product Code
Product Description
Length (mm)
Thread Form Driven End
Bolt End
Bolt Type
Weight Each (kg)
FDSM-33 Driver Tool, 33 stabiliser (Male Hex) 835 Male 22 Hex n/a Friction Stabiliser 33 1.5
FDSF-33 Driver Tool, 33 stabiliser (Female Hex) 835 Female 22 Hex n/a Friction Stabiliser 33 1.5
FDSR38-39 Driver Tool, 39 Stabiliser (R38 Thread) 175 Female R38 n/a Friction Stabiliser 39 1.7
FDST38-39 Driver Tool, 39 Stabiliser (R38 Thread) 175 Female T38 n/a Friction Stabiliser 39 1.7
FDSR38-47 Driver Tool, 47 Stabiliser (R38 Thread) 175 Female R38 n/a Friction Stabiliser 47 1.8
FDST38-47 Driver Tool, 47 Stabiliser (T38 Thread) 175 Female T38 n/a Friction Stabiliser 47 1.8
FDRB36AFR38-50 Driver Tool, Resin Bolt 36AF Nut (R38 Thread) x 500mm 500 Female R38 36AF Wriggle Bolt T20 & N24 6.7
FDRB36AFT38-50 Driver Tool, Resin Bolt 36AF Nut (T38 Thread) x 500mm 500 Female T38 36AF Wriggle Bolt T20 & N24 6.7
FDRB36AFR38-65 Driver Tool, Resin Bolt 36AF Nut (R38 Thread) x 650mm 600 Female R38 36AF Wriggle Bolt T20 & N24 8.6
FDRB36AFT38-65 Driver Tool, Resin Bolt 36AF Nut (T38 Thread) x 650mm 600 Female T38 36AF Wriggle Bolt T20 & N24 8.6
FDRB36AFR38-72 Driver Tool, Resin Bolt 36AF Nut (T38 Thread) x 720mm 720 Female R38 36AF Wriggle Bolt T20 & N24 10.4
FDRB36AFT38-72 Driver Tool, Resin Bolt 36AF Nut (T38 Thread) x 720mm 720 Female T38 36AF Wriggle Bolt T20 & N24 10.4
FDRB36AFR38-90 Driver Tool, Resin Bolt 36AF Nut (R38 Thread) x 900mm 900 Female R38 36AF Wriggle Bolt T20 & N24 12.3
FDRB36ATR38-90 Driver Tool, Resin Bolt 36AF Nut (T38 Thread) x 900mm 900 Female T38 36AF Wriggle Bolt T20 & N24 12.3
FDRB36A22HEXM-50 Driver Tool, Resin Bolt 36AF Nut (Male 22 Hex) x 500mm 500 Male 22 Hex 36AF Wriggle Bolt T20 & N24 5
FDSA22HEXF-T20 Driver Tool, T20 Spin Adapter (Female 22 Hex) 100 Female 22 Hex T20 Thread Bar T20 0.6
1.1.2 Driver Tools for use with Fero Wriggle Bolts & Solid Bolts include:Spin Adaptors Spin adaptors are used to install solid bolts supplied without a standard pinned nut. Primarily used for hand held installation with Air Leg, spin adaptors are available in female configurations to suit the 22mm Hex adaptor.
Resin Bolt Driver Tools Used for mechanised installation (jumbo) of wriggle bolts and other solid bolts that come standard with a pinned nut. Resin bolt drivers are available in R38 or T38 thread and in various lengths (Standard lengths 500mm, 600mm, 720mm and 900mm; with other lengths available upon request and to suit different Hex nut sizes. Fero can also supply standard driver tools for use with Air-Leg mining equipment. The driver is inserted directly into the Air-Leg chuck.
![Page 68: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/68.jpg)
66 www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
1.2 Spiral BarThe spiral bar is manufactured with a cold rolled thread over its entire length and supplied in standard lengths of 3100mm or 3600mm. The spiral bar is cut to the desired length on the mine site and is used to connect the rock drill and the 39mm or 47mm stabiliser driver tool.
Spiral Bar Product Code
Product Description
Length (mm)
Thread Type
Weight Each (kg)
FSBR38-3100 Spiral Bar, R38 Thread x 3100 3100 R38 20
FSBR38-3600 Spiral Bar, R38 Thread x 3600 3600 R38 23.5
1.3 Pull Testing CollarsThe pull collar is placed on the friction stabiliser during the installation process to enable the load capacity of the bolt to be pull tested. This will verify the effectiveness of the friction stabiliser upon completion of installation and periodically over time. Fero Strata supplies both carbon hollow bar or drop forged pull collars to fit 33mm, 39mm and 47mm diameter friction stabilisers. Available untreated or hot-dip galvanised in packs of 50.
Pull Collars Product Code
Product Description
Internal Diameter (mm)
Material Type
Length (mm)
Pack Weight (kg)
Pack Size
FPC33G Pull Collar 33mm - HDG 35 Machined 40 32.5 50
FPC39G Pull Collar 39mm - HDG 41 Machined 40 32.5 50
FPC47G Pull Collar 47mm - HDG 50 Machined 40 32.5 50
FPCF47G Pull Collar 47mm Forged - HDG 50 Forged 40 17.5 50
1.4 Pull Test EquipmentPull testing is essential to verify rock bolt system performance. Fero supplies both hand-operated and battery operated pull testing units for on-site testing of most rock bolt systems. The kit is easily
transportable. Alternatively the Fero technical services team can provide a full underground pull testing service.
![Page 69: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/69.jpg)
67www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
Drill Bit Gauge Product Code
Product Description
Weight Each (kg)
Pack Size
FDBG-33 Drill Bit Gauge - 33mm Friction Stabiliser 0.3 1
FDBG-39 Drill Bit Gauge - 39mm Friction Stabiliser 0.3 1
FDBG-47 Drill Bit Gauge - 47mm Friction Stabiliser 0.3 1
1.5 Drill Bit GaugeThe diameter of the drill hole is critical for ensuring the effectiveness of the friction stabiliser. A bit gauge is used to measure the diameter of the drill bit which drills the hole for the friction stabiliser to be inserted into. The drill hole should be slightly,smaller (typically 2-4mm smaller) than the friction stabiliser to be used. In soft ground it may be necessary to further reduce the bit size to increase contact between the steel and the hole thus generating greater load transfer and increasing pull-out load.
1.6 Cable Anchors (Barrel & Wedges)Used to secure cable bolt against the plate and rock surface, Fero’s flat and dome barrel and wedge provide support at the collar of the hole and are available to suit various cable diameters.
Flat barrels and wedges are used for the installation of flat plates, while dome barrels and wedges are available to suit dome plates when anchoring cable bolts. The dome barrel allows the cable bolt to distribute the load evenly on the plate when pre-stressed. Wedges can be supplied in 3-leaf or 2-leaf configurations with an o-ring or circlip. Wedges are machined with serrations on the inside, which are case hardened allowing the wedge serrations to grip onto the cable during the pre-stressing process.
Cable Anchors Product Code
Product Description
Cable Diameter (mm)
Barrel Length (mm)
Barrel Diameter (mm)
No. Wedges
Weight Each (kg)
Pack Size
FCBA15-2F Cable Anchor, 15.2mm Flat Barrel and 2-piece Wedge Set 15.2mm 45 42 2 15 30
FCBA15-2D Cable Anchor, 15.2mm Dome Barrel and 2-piece Wedge Set 15.2mm 45 42 2 15 30
FCBA15-3F Cable Anchor, 15.2mm Flat Barrel and 3-piece Wedge Set 15.2mm 45 42 3 15 30
FCBA15-3D Cable Anchor, 15.2mm Dome Barrel and 3-piece Wedge Set 15.2mm 45 42 3 15 30
![Page 70: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/70.jpg)
68 www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
1.7 WedgesWedges are predominantly used to secure solid bolts and eye bolts that come with a slotted end, also used to support L and U-pins into drilled holes.
Wedges Product Code
Product Description
Wedge Length (mm)
Wedge Diamter (mm)
Material Type
Weight Each (kg)
Pack Size
FWS18150 Wedge, Steel 18mm Diameter x 150 Long 150 18 Steel 12 50
FWS18180 Wedge, Steel 18mm Diameter x 180 Long 180 18 Steel 14.5 50
FWS20150 Wedge, Steel 20mm Diameter x 150 Long 150 20 Steel 14.5 50
FWW25250 Wedge, Wood 25mm x 50mm x 250mm Long 250 25 Wood 20 50
1.8 Eye BoltsGenerally used for hanging of light services in mining applications, Fero manufactures and supplies 16mm, 20mm and 24mm eye bolts in various lengths with an eye loop welded at one end. Eye bolts are supplied with a rolled metric right-hand-thread to suit our range of mechanical anchors or with a slot end to suit wedges. Manufactured from deformed bar, Fero eye bolts are available in untreated or galvanized
Eye Bolts Product Code
Product Description
Bar Diameter (mm)
Overall Length (mm)
Thread Type
Material Type
Weight Each (kg)
FEBN16M16R-500 Eye Bolt N16 c/w M16 RHT x 500 16 500 M16 RHT N-Class Deformed Bar 1.5
FEBN20M20R-500 Eye Bolt N20 c/w M20 RHT x 500 20 500 M20 RHT N-Class Deformed Bar 2.6
FEBN24M24R-500 Eye Bolt N24 c/w M24 RHT x 500 24 500 M24 RHT N-Class Deformed Bar 4
FEBN16M16R-600 Eye Bolt N16 c/w M16 RHT x 600 16 600 M16 RHT N-Class Deformed Bar 1.6
FEBN20M20R-600 Eye Bolt N20 c/w M20 RHT x 600 20 600 M20 RHT N-Class Deformed Bar 2.7
FEBN24M24R-600 Eye Bolt N24 c/w M24 RHT x 600 24 600 M24 RHT N-Class Deformed Bar 4.4
FEBN24S-600 Eye Bolt N24 Slot x 600 24 600 Slot (150mm Long x 2.5mm wide) N-Class Deformed Bar 4.4
FEBN24M24R-900 Eye Bolt N24 c/w M24 RHT x 900 24 900 M24 RHT N-Class Deformed Bar 5.5
FEBN16M16R-1200 Eye Bolt N16 c/w M16 RHT x 1200 16 1200 M16 RHT N-Class Deformed Bar 2.6
FEBN24M24R-1200 Eye Bolt N24 c/w M24 RHT x 1200 24 1200 M24 RHT N-Class Deformed Bar 7.5
FEBN24S-1200 Eye Bolt N24 Slot x 1200 24 1200 Slot (150mm Long x 2.5mm wide) N-Class Deformed Bar 7.5
and are typically used with a mechanical anchor to enable instant use. Standard sizes in table below with other sizes readily available.
Wedges can be supplied in either wood or steel versions. Standard sizes in table below with other sizes readily available.
![Page 71: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/71.jpg)
69www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
1.9 Service HangersService hangers are available incorporating multiple hook configurations and are typically attached to enable the hanging of multiple service lines such as water, electrical cables
Service Hangers Product Code
Product Description
Length (mm)
Eye ID (mm)
No. Hangers
Hanger ID (mm)
Weight Each (kg)
Pack Size
FSH3H Service Hanger, 3 Hook 800 50 3 120 1 50
FSH4H Service Hanger, 4 Hook 1000 50 4 120 2 50
1.10 L&U PinsL-shaped and U-shaped pins used for hanging cables and other services. Fero manufactures and supplies 16mm, 20mm, 24mm and 32mm L&U Pins are available in various lengths and
L&U Pins Product Code
Product Description
Bar Diameter (mm)
Length (mm)
Return (mm)
Material Type Weight Each (kg)
FLPN16-600100 L - Pin N16 x 600 x 100 16 600 100 N-Class Deformed Bar 1.1
FLPN20-650200 L - Pin N20 x 650 x 200 20 650 200 N-Class Deformed Bar 2.1
FLPR22-600100 L - Pin R22 x 600 x 100 22 600 100 Round Bar 2
FLPR22-600200 L - Pin R22 x 600 x 200 22 600 200 Round Bar 2.1
FLPN24-600230 L - Pin N24 x 600 x 230 24 600 230 N-Class Deformed Bar 2.6
FLPN24-600300 L - Pin N24 x 600 x 300 24 600 300 N-Class Deformed Bar 3.1
FLPN32-450230 L - Pin N32 x 450 x 230 32 450 230 N-Class Deformed Bar 4.1
FLPR33-450230 L - Pin R33 x 450 x 230 33 450 150 Round Bar 4.3
FUPN28-600275150 U - Pin N28 x 600 x 275 x 150 28 600 150 N-Class Deformed Bar 6.1
width configurations. Manufactured from deformed bar Fero L&U Pins are available in untreated or galvanized. Standard sizes in table below with other sizes readily available.
and compressed air. Available in untreated or galvanized, standard sizes in table below with other sizes readily available.
![Page 72: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/72.jpg)
70 www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
http://maps.gstatic.com/intl/en_au/mapfiles/transparent.png
1.11 Hanger NutsAvailable in both D series and W series, hanger nuts screw onto the thread of the solid bolt to support cabling and other services. Various nut size and thread combinations are available to suit any rock bolt in the Fero Strata range. We can also customise hanger nuts to suit various applications. Standard sizes are in the table below with other sizes readily available.
Hanger Nuts Product Code
Product Description
Nut Length (mm)
Hex Diamter (mm)
Thread Type
Hanger Type
Pack Weight (kg)
Pack Size
FNHT20L-W Nut, Hanger T20 LHT - W Series 44 36 A/F T20 LHT W 22 50
FNHT20L-WZ Nut, Hanger T20 LHT - W Series - Zinc 44 36 A/F T20 LHT W 22 50
FNHT20L-D Nut, Hanger T20 LHT - D Series 44 36 A/F T20 LHT D 18 50
FNHT20L-DZ Nut, Hanger T20 LHT - D Series - Zinc 44 36 A/F T20 LHT D 18 50
1.12 Scaling Bars (Steel & Aluminium)Fero scaling bars are used to remove loose rocks in underground mining and tunneling operations. Lightweight yet robust, scaling bar tips are either hot forged or heat treated and are available with a straight and bent tip. Grades offered include mild steel round bar, hex steel and seamless aluminum tube. Standard sizes in table below with other sizes readily available.
Product Code Product Description
Length (mtrs)
Weight (kg)
Material Type Pack Quantity
FSBA-1800 Scaling Bar, Aluminium x 1800 1.8 3.6 Aluminium Each
FSBA-2400 Scaling Bar, Aluminium x 2400 2.4 7.3 Aluminium Each
FSBA-3000 Scaling Bar, Aluminium x 3000 3.0 6.0 Aluminium Each
FSBA-4000 Scaling Bar, Aluminium x 4000 4.0 8.0 Aluminium Each
FSBR24-1200 Scaling Bar, R24 Steel x 1200 1.2 3.7 Steel Each
FSBR24-1500 Scaling Bar, R24 Steel x 1500 1.5 4.6 Steel Each
FSBR24-1800 Scaling Bar, R24 Steel x 1800 1.8 5.5 Steel Each
FSBR24-2100 Scaling Bar, R24 Steel x 2100 2.1 6.4 Steel Each
FSBR24-2400 Scaling Bar, R24 Steel x 2400 2.4 7.3 Steel Each
![Page 73: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/73.jpg)
71www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
http://maps.gstatic.com/intl/en_au/mapfiles/transparent.png
1.13 Breather & Grout TubesManufactured from high-density polyethylene material to resist abrasions and crushing, breather and grout tubes are usually used to pump cementitious grouts for rock and cable bolt applications. The breather tube works in
conjunction with the Grout Tube to allow air to escape from the bolt hole and provides a positive indication of grouting progress. Standard sizes in table below with other sizes readily available.
Breather & Grout Tube Product Code
Product Description
Nut Length (mm)
Tube ID (mm)
Tube OD (mm)
Weight Each (kg)
FBT13-300 Breather Tube, 13mm x 300 Mtrs 300 10 13 15.6
FGT20-200 Grout Tube, 20mm x 200 Mtrs 200 17 20 16.4
1.14 Nuts - MiningThe nut is attached to the threaded end of the bolt and is used to secure the plate during the installation of rock bolts.
Fero also offer a one piece Dome ball nut which assists with better alignment of the bolt and plate, as well as eliminating the need to carry two inventory items on site (nut & dome ball washer).
Fero nuts are available in a range of sizes and thread directions (both left-hand and right-hand thread). Nuts can be supplied untreated or hot-dip galvanised which is recommended in corrosive environments. Standard sizes in table below with other sizes readily available.
Nuts Product Code
Product Description
Nut Length (mm)
Hex Diameter
Thread Type
Pack Weight (kg)
Pack Size
FNT20L Nut, T20LHT 44 36AF T20LHT 12.5 50
FNT20LZ Nut, T20 LHT - Zinc 44 36AF T20LHT 12.5 50
FNT25L Nut, T25 LHT 57 41AF T25LHT 20 50
FNT25LZ Nut, T25 LHT - Zinc 57 41AF T25LHT 20 50
FNM24L Nut, M24 x 3.0mm Pitch LHT 24 36A/F M24LHT 7 50
FNM24LZ Nut, M24 x 3.0mm Pitch LHT - Zinc 24 36A/F M24LHT 7 50
FNDBT20L Nut c/w Dome Ball Washer - T20 LHT, 1 piece 44 36A/F T20LHT 17 50
FNDBT20LG Nut c/w Dome Ball Washer T20 LHT, 1-piece HDG 44 36A/F T20LHT 17 50
FNDBT25L Nut c/w Dome Ball Washer - T25 LHT, 1 piece 57 41AF T35LHT 33 50
FNDBT25LG Nut c/w Dome Ball Washer - T25 LHT, 1 piece HDG 57 41AF T25 LHT 33 50
Nut c/w Dome Ball Washer - T20 LHT
Nut - T20 LHT
![Page 74: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/74.jpg)
72 www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
1.15 Dome Ball WashersThe dome ball washer is used in conjunction with the nut and the compatible dome plate. The dome ball washer assists in better alignment of the bolt and plate and maximising of load transfer. Standard sizes in table below with other sizes readily available.
Dome Ball Washers Product Code
Product Description
Height (mm)
Overall Diameter (mm)
Hole Size (mm)
Pack Weight (kg)
Pack Size
FDBW24 Washer, Dome Ball 24mm 24 55 29 12.5 50
FDBW24Z Washer, Dome Ball 24mm - Zinc 24 55 29 12.5 50
1.16 Mechanical AnchorsQuick and easy to install, mechanical anchors provide immediate point anchored load bearing support and are best suited to medium to hard rock types. Once inserted in the hole at the end of the solid bolt or eye bolt, the mechanical anchor is tensioned. Load bearing capacity will depend on ground type. Standard sizes in table below with other sizes readily available.
Mechanical Anchors Expansion Shell Product Code
Product Description
Anchor Length (mm)
Wedge Length (mm)
Bolt Diameter (mm)
Thread Profile
Optimum Hole Diameter (mm)
Pack Weight (kg)
Pack Size
FMAM16R32 Anchor, Mechanical M16 x 32mm RHT Bail Type 98 57 16 M16 RHT 35 5.5 25
FMAM20R32 Anchor, Mechanical M20 x 32mm RHT Bail Type 83 54 20 M20 RHT 35 4.8 15
FMAM24R43 Anchor, Mechanical M24 x 43mm RHT Bail Type 119 76 24 M24 RHT 43 6.9 15
![Page 75: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/75.jpg)
73www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
1.17 CouplersCouplers enable bolts to be joined to enable longer length bolting in confined spaces. Primarily used when headroom is limited, bolts are threaded from each end of the coupler so equal bolt threading is obtained. Manufactured from high tensile steel and available untreated or hot-dip galvanised.
1.18 Cable Bolt TensionerFero supplies industry standard hydraulic 10 tonne & 25 tonne tensioners designed for 15.2mm cable bolts. Manufactured to withstand the demands of underground mining, the tensioner is designed to tension 15.2mm cable up to 10 or 25 tonnes and can be used for 12.7mm cable. The unit has an operating pressure of 80-120psi weighs approximately 8kg and has a standard 3m length hose and a pressure gauge to enable accurate tensioning. Fero also offer a full range of spares to suit cable tensioners such as jaws, seal kits, nose cones, scraper seals and jack inner guide.
Cable Tensioners Product Code
Product Description
FCT10T Cable Tensioner, 10 Tonne
FCT10T-J Cable Tensioner, 10 Tonne - Jaws
FCT10-SK Cable Tensioner, 10 Tonne -Seal Kit
FCT10-NC Cable Tensioner, 10 Tonne - Nose Cone
FCT10-IGS Cable Tensioner, 10 Tonne - Inner Guide Spring
FCT10-IGT Cable Tensioner, 10 Tonne - Inner Guide Tube
FCT25T Cable Tensioner, 25 Tonne
FCT25T-J Cable Tensioner, 25 Tonne - Jaws
FCT25-SK Cable Tensioner, 25 Tonne -Seal Kit
FCT25-NC Cable Tensioner, 25 Tonne - Nose Cone
FCT25-IGS Cable Tensioner, 25 Tonne - Inner Guide Spring
FCT25-IGT Cable Tensioner, 25 Tonne - Inner Guide Tube
![Page 76: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/76.jpg)
74 www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
1.19 Grout Pump & MixerPrimarily used for post grouting of cable bolts and friction stabilisers, Fero supplies an integrated portable pneumatic grout pump and mixer unit for injection grouting.
Designed specifically for the underground mining industry, the unit has a 160 litre capacity, 5HP Air motor, an 11:1 reduction gearbox and an operating pressure of 100psi, discharge pressure 400psi and a nominal 35 litre per minute output.
Grout Mixer & Pump Product Code
Product Description
FGM5HPC Grout Mixer, Complete
FGM5HPGB Grout Mixer, 5 HP Air Motor & Gear Box (Only)
FGM5HP-RK Grout Mixer, 5HP Air Motor - Repair Kit (Complete)
FGPSSC Grout Pump, Complete
FGPSSW Grout Pump, Stainless Steel Wet End (Only)
FGPSS-RKW Grout Pump, Stainless Steel Wet End - Repair Kit (Cup Seals)
FGPSS-RKH Grout Pump, Stainless Steel Wet End - Repair Kit (Head)
1.20 Cotton WasteCotton waste is used to bung holes to prevent grout escaping when post grouting cable bolts.
Cotton Waste Product Code
Product Description
Weight (Kg)
F COTTWAS-10 Cotton Waste, Bag 10
1.21 MethocelAn additive recommended for efficient grouting of cable bolts, Methocel works to prevent segregation of water and cement and reduces grout shrinkage during curing. This ensures the required anchorage and load transfer is achieved.
Methocel Product Code
Product Description
Bag Size (grams)
Weight each (kg)
FMC150G-4KG Methocel, 150 Gram Bags (4 Kg) 150 4
FMC150G-9KG Methocel, 150 Gram Bags (9 Kg) 150 9
FMC80G-8KG Methocel, 80 Gram Bags (9 Kg) 80 8
![Page 77: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/77.jpg)
75www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
1.22 Copper ScraperA length of copper wire used to clear blast holes in preparation of charging, copper scapers are available in quantities as required.
Copper Scrapper Product Code
Product Description
Overall Length (mm)
Pack Weight (kg)
Pack Size
FSC900-0.8 Scraper, Copper 900 x 0.8mm 900 6 10
FSC1800-0.8 Scraper, Copper 1800 x 0.8mm 1800 10 10
1.23 Riser LaddersFero supplies a range of interlocking ladder systems for underground mining and tunnelling, these are available in various lengths, material grades and quantities as required.
Riser Ladders Product Code
Product Description
Overall Length (mm)
Weight each (kg)
FRLS-3000 Riser Ladder, Steel x 3000 3000 15
FRLW-3000 Riser Ladder, Wood x 3000 3000 24
FRLW-6000 Riser Ladder, Wood x 6000 6000 48
![Page 78: Ground Support Products - PT Nusantara Sangga Bumi · ground support products and accessories for the international ... bolt into a slightly smaller diameter hole generates a load](https://reader031.vdocuments.us/reader031/viewer/2022020217/5d18921288c99313688dea18/html5/thumbnails/78.jpg)
76 www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.
A Division of Fero Group
For further information and ordering contact: [email protected]
www.fero.com.au
Corporate Office & Manufacturing Facility WESTERN AUSTRALIA44 Chisholm Crescent Kewdale WA 6105Tel: +618 9453 0000 Fax: +618 9453 0050
Manufacturing Facility QUEENSLAND9 Boron Street Narangba QLD 4504Tel: +617 3888 4533 Fax: +617 3888 4790
Branch Locations AUSTRALIAKalgoorlie WABurnie TASBendigo VICMount Isa QLDTownsville QLD