Assemble part 1. Set aside

Assemble part 5. Add weights before sealing then set aside.

Assemble parts 9 and 10. Set aside.

1

2

3

Assemble parts 2, 3 and 4. Tip: Put the double adhesive on the bigger tab instead, for a cleaner nish.

Assemble parts 6 and 8. Glue part 8 to the end of part 6.

4

5

6

Glue parts 5 and 4 to parts 9 and 10. Assemble part 6 to come out of the pots hole. Dont glue anything.

Assemble part 7 to cover the pot, aligning the 1 markers. Pull out part 8 to come out of the horizontal slit. Glue part 7 tabs to part 1.

Glue part 5 to the inside of part 1, aligning to the marker outside.

7

8

Assemble parts 11 and 12.

Assemble parts 13 and 14, then glue together.

Glue 11 to 2, and 12 to 3.

Glue part 5 to the inside of part 1, aligning to the marker outside.

Add glue

9

10

11

Glue parts 2 and 3 to parts 9 and 10. Glue part 13 to part 12s planes. Glue part 8 to the bottom of part 14.

Assemble parts 18 and 19. Glue to part 11s planes.

Glue 11 to 2, and 12 to 3.

Add double adhesive tape Glue carefully to this spot.

Glue carefully to this spot.

12 13

14 15

Glue part 25 together and cut, then glue to part 20 to form the crown. Set aside.

Glue part 25 together, then glue to part 17.

Glue the scalp of part 20 to the inside of part 17, then glue all tabs together to form the head.

Note: The mouth in the nal template is in a new position that will not match the pictures.

16

17

18

Glue 27, 28, and 29 together, the cut along. Assemble 21-24. Connect 21 to 22 and 23 to 24.

Make a spring from parts 15 and 16.

Glue spring to part 18. Glue the head onto the spring.

19 20

21

22

Glue the arms and branches to the body.