greensmart™ - sit ipi system - travis dealer...and stepper motor and fan control module with a...
TRANSCRIPT
GreenSmart™ - SIT IPI System
56Copyright © 3/5/2009 - Travis Industries Certified Factory Training Program
What is GreenSmart™?
This patent-pending, GreenSmart™ System is the most innovative collectionof components, controls and technology of any gas-burning stoves, inserts orfireplaces we have ever made. This assembly embodies our most popularinnovations with a twist, and a wide array of thrilling new breakthroughs. Webelieve these components and controls will make homeowners everywherecovet these gas-burning designs.
GreenSmart Standard Features:
Choice of Pilots – GreenSmart IPI or Continuous Pilot: Allows you to run yourfireplace in either standing pilot mode - where the pilot flame continually stayson, ideal during periods of extreme cold when a draft is needed for safe, properoperation – or in the GreenSmart mode, where the pilot flame ignites via anintermittent pilot spark that does not run continually and thus conserves energywhen the fireplace is not being operated. The GreenSmart system includesa battery back-up, ensuring proper ignition even during power outages.
Incredible Turn-Down Ratio: An electric servo motor turns off the rear burnerwhile leaving the front burner on for an attractive flame appearance when heatoutput is not the priority. This feature offers a turn-down ratio of up to 72percent. This feature works with all three GreenSmart split-flow burners andoffers a more efficient way to heat the room by only burning the correct amountof fuel to keep a constant temperature; so this is another smarter, greener wayto enjoy fire in the home.
Air Shutter Adjustment Levers: Both the front and rear burner air shutteradjustments are external to the firebox and just behind the concealment door. Each lever is color coded to for easy identification of the front burner (red)and rear burner (yellow), when adjustments to the fire are needed. This featureeliminates the need to turn the unit off, cool down, and remove the glass andlogs before adjusting.
GreenSmart™ - SIT IPI System
57Copyright © 3/5/2009 - Travis Industries Certified Factory Training Program
Accent Light: Standard feature in all GreenSmart stoves, fireplaces and inserts.
Glide-Away™ Concealment Door: On some models, the control area is hiddenby the external front faceplate but the various valves and wiring can still be seenthrough the grill. In an effort to provide an elegant final appearance, a concealmentdoor conveniently opens/closes for easy access if control adjustments are desired.
Drop-Down Concealment Door: On some models, the control area is hiddenby a concealment door that conveniently drops-down for easy access if controladjustments are desired.
Automatic Control Panel Lighting: When the concealment door is opened,control panel lighting is automatically triggered to make any adjustments easy duringa low light environment in the home.
Choice of GreenSmart Split-Flow Burners:
Dancing-Fire™ Split-Flow Burner: The Dancing-Fire is a split-flow steel burnerwhere the two separate burners can be operated together for maximum heat outputand flame appearance; or with only the front burner for a magnificent turn-downratio. This flexibility allows for a continual flame appearance when lower heat outputis needed; and when combined with the GreenSmart™ Remote – provides a smarter,greener way to heat the home.
Ember-Fyre™ Split-Flow Burner: The award-winning Ember-Fyre™ gas burnertechnology, known for its gorgeous, dancing yellow-flame fire with flickering embers– is a split-flow ceramic burner where the two separate burners can be operatedtogether for maximum heat output and flame appearance. This elite burner is theideal choice for ultimate GreenSmart performance.
Diamond-Fyre™ Split-Flow Burner: The Diamond-Fyre™ split-flow burner combinesa reflective glass floor with subtle uplighting for a contemporary presentation of lightwith fire.
GreenSmart™ - SIT IPI System
58Copyright © 3/5/2009 - Travis Industries Certified Factory Training Program
Basic GreenSmart Control System:
This control panel is located under the front of the appliance, and is operated manually. Ithas five components:
• Blower Manual Control
• Accent Light Manual Control
• Flame Adjustment: Variable flame adjustments using manually-operated regulator.
• Pilot Selection: Two position rocker switch.
· GreenSmart Cartridge
A. Comfort Control: This ON/OFF rocker switch electronically turns the rear portion of the burner on/off.
B. AA Battery Tray: Easy access from battery pack
C. Main Burner Switch: This switch turns the burner on/off.
Upgrade GreenSmart Remote Control System:
This option includes a hand-held remote, a receiver, a control module, the upgradeGreenSmart cartridge and a wire harness. All basic features are controlled via thehand-held remote control, with two additional exciting features:
• Thermostat Mode
• Smart Thermostat Mode: this allows the heating appliance to automatically • adjust the flame height based on the temperature set via the GreenSmart remote
• • control’s thermostat. So if a temperature of 68 degrees is set, the heating appliance• will automatically adjust the flame height to regulate and maintain the set temperature.• The burner will modulate from low to high, or high to low until the set temperature
• • is reached, thus conserving fuel and maximizing heating ability to extend the viewing• pleasure of the fire. All other systems are controlled manually via the remote, as well.
SIT IPI Gas Valves
Copyright © 3/5/2009 - Travis Industries Certified Factory Training Program 59
GreenSmart™ - SIT IPI System
SIT Valve For IPI System
60
GreenSmart™ - SIT IPI System
Copyright © 3/5/2009 - Travis Industries Certified Factory Training Program
Parts of the Valve
61
GreenSmart™ - SIT IPI System
Copyright © 3/5/2009 - Travis Industries Certified Factory Training Program
1. ON/OFF Solenoid EV1 Terminal
2. ON/OFF Solenoid EV2 Terminal
3. Inlet Pressure Test Point
4. Outlet Pressure Test Point
5. Pressure Regulator Adjustment Screw
6. Pilot Adjusting Screw
7. Pilot Outlet
8. Main Gas Inlet
9. Main Gas Outlet
10.-11. Ground Connection
12. Mounting Holes
64
GreenSmart™ - SIT IPI System
Copyright © 3/5/2009 - Travis Industries Certified Factory Training Program
65
GreenSmart™ - SIT IPI System
Copyright © 3/5/2009 - Travis Industries Certified Factory Training Program
Split Flow Valve
66
GreenSmart™ - SIT IPI System
Copyright © 3/5/2009 - Travis Industries Certified Factory Training Program
Spark Rod Pilot Sensor
Pilot Ground
67
GreenSmart™ - SIT IPI System
Copyright © 3/5/2009 - Travis Industries Certified Factory Training Program
Continuous Pilot
GreenSmart Pilot
68
GreenSmart™ - SIT IPI System
Copyright © 3/5/2009 - Travis Industries Certified Factory Training Program
Comfort Control™
69
GreenSmart™ - SIT IPI System
Copyright © 3/5/2009 - Travis Industries Certified Factory Training Program
Main Burner
70
GreenSmart™ - SIT IPI System
Copyright © 3/5/2009 - Travis Industries Certified Factory Training Program
MainBurner
AA BatteryTray
ComfortControl
71
GreenSmart™ - SIT IPI System
Copyright © 3/5/2009 - Travis Industries Certified Factory Training Program
SIT Module
73
GreenSmart™ - SIT IPI System
Copyright © 3/5/2009 - Travis Industries Certified Factory Training Program
Transmitter (Remote Control with LCD Display)
The Proflame Transmitter uses a streamline design with a simplebutton layout and informative LCD display with blue back light (Fig.1). The transmitter is powered by 3 AAA type batteries. A Modekey is provided to index between the features and a Thermostatkey is used to turn on/off or index though thermostat functions (Fig.1 & 2).
Fig. 1: Proflame Transmitter
74
GreenSmart™ - SIT IPI System
Copyright © 3/5/2009 - Travis Industries Certified Factory Training Program
LCD Display
75
GreenSmart™ - SIT IPI System
Copyright © 3/5/2009 - Travis Industries Certified Factory Training Program
Receiver
The Proflame Receiver (Fig. 3) connects directly to the gas valveand stepper motor and Fan Control Module with a wiring harness.The receiver is powered by 4 AA type batteries. The receiveraccepts commands via radio frequency from the Transmitter tooperate the appliance in accordance with the particular Proflamesystem configuration. The receiver three position slider switch canbe set to one of three positions ON (Manual Override), Remote(Remote control) or OFF.
Fig. 3: Proflame Receiver Body
76
GreenSmart™ - SIT IPI System
Copyright © 3/5/2009 - Travis Industries Certified Factory Training Program
Fan Control Module (Proflame GTMF only)
Fan Control Module (FCM) offers the added ability to control thefan speed from off through six (6) speeds, a remotely actuated 120Voutlet and a constantly powered 120V outlet. The FCM providesDC power to the receiver allowing the batteries to be used onlywhen line power is interrupted or lost (Fig. 4).
Fig. 4: Fan Control Module
78
GreenSmart™ - SIT IPI System
Copyright © 3/5/2009 - Travis Industries Certified Factory Training Program
Remote Receiver
79
GreenSmart™ - SIT IPI System
Copyright © 3/5/2009 - Travis Industries Certified Factory Training Program
Fan Controller
81
GreenSmart™ - SIT IPI System
Copyright © 3/5/2009 - Travis Industries Certified Factory Training Program
Turn on the Appliance
Press the ON/OFF key on the transmitter. The transmitter will showall active Icons on the screen. At the same time the receiverconnects the thermopile to the gas valve millivolt coil and theappliance main burner turns on. A single “beep” from the receiverwill confirm reception of the command.
Display Fahrenheit or Celsius
Temperature Indication Display
With the system in the “OFF” position, press the Thermostat Keand the Mode Key at the same time. Look at the LCD screen onthe transmitter to verify that a C or F is visible to the right of theRoom Temperature display. (Fig. 7)
Fig. 7: Remote Control display in Farenheit and Celsius
82
GreenSmart™ - SIT IPI System
Copyright © 3/5/2009 - Travis Industries Certified Factory Training Program
Turn off the Appliance
Press the ON/OFF key on the transmitter. The transmitter LCDdisplay will only show the room temperature and Icon (Fig. 8). Atthe same time the receiver disconnects the thermopile from thegas valve millivolt coil and the appliance burner turns off. A single“beep” from the receiver confirms reception of the command.
ON/OFF
Turn on the Appliance
Press the ON/OFF key on the transmitter. The transmitter displaywill show all active Icons on the screen. At the same time thereceiver connects the thermopile to the gas valve millivolt coil andthe appliance main burner turns on. A single “beep” from thereceiver will confirm reception of the command.
Fig. 8: Remote Control display
83
GreenSmart™ - SIT IPI System
Copyright © 3/5/2009 - Travis Industries Certified Factory Training Program
Remote Flame Control
Proflame GT: With the system on, and the flame present in theappliance, pressing the Down Arrow Key will turn off the flame whilethe remote wystem is still on. If the Up Arrow Key is pressed while inthe above descrived stat the flame will come on. (Fig. 9A & 9D)
Proflame GTM & GTMF: Has six (6) flame levels. With the systemon and the flame level at the maximum in the appliance, pressing theDown Arrow Key once will reduce the flame height by one step untilthe flame is turned off. The Up Arrow Key will increase the flame heighteach time it is pressed. If the Up Arrow Key is pressed while thesystem is on but the flame is off, the flame will come on in the highposition. (Fig. 9) A single “beep” will confirm reception of the command.
Flame Controls
84
GreenSmart™ - SIT IPI System
Copyright © 3/5/2009 - Travis Industries Certified Factory Training Program
Room Thermostat (Transmitter Operation)The Remote Control can operate as a room thermostat. The thermostatcan be set to a desired temperature to control the comfort level in a room.
To activate this function, press the Thermostat Key (Fig.1). The LCD displayon the Transmitter will change to show that the room thermostat is “ON”and the set temperature is now displayed (Fig. 10). To adjust the settemperature, press the Up or Down Arrow Keys until the desired settemperaure is displayed on the LCD screen of the Transmitter (Fig. 11).
Thermostat Mode
85
GreenSmart™ - SIT IPI System
Copyright © 3/5/2009 - Travis Industries Certified Factory Training Program
Smart Thermostat (Transmitter Operation)(Proflame GTM & GTMF only)The Smart Thermostat function adjusts the flame height in accordance tothe difference between the set point temperature and the actual roomtemperature. As the room temperature gets closer to the set point theSmart Function will modulate the flame down. To activate this function,press the Thermostat Key (Fig. 1) until the word “Smart” appears to theright of the temperature bulb graphic (Fig. 12). To adjust the set temperature,press the Up or Down Key Arrows until the desired set temperature isdisplayed on the LCD Screen o fthe Transmitter (Fig. 13).
Smart Thermostat Mode
86
GreenSmart™ - SIT IPI System
Copyright © 3/5/2009 - Travis Industries Certified Factory Training Program
Fan Speed Control (Proflame GTMF only)
If the appliance is equipped with a hot air circulating fan, the speedof the fan can be controlled by the Proflame System. The fanspeed can by adjusted through six (6) speeds. To activate thisfunction use the Mode Key (Fig. 1) to index to the fan control Icon(Fig. 14). Use the Up or Down Arrow Keys (Fig. 1) to turn on, offor adjust the fan speed (Fig. 15). A single “beep” will confirmreception of the command.
Fan Speed Control
87
GreenSmart™ - SIT IPI System
Copyright © 3/5/2009 - Travis Industries Certified Factory Training Program
Remote Actuated 120V Auxiliary Outlet (Proflame GTMF only)
The auxiliary function controls the AUX power outlet on the FanControl Module. To activiate this function use the Mode Key (Fig.1) to index to the AUX Icon (Fig. 16 &17). Pressing the Up ArrowKey will activate the outlet. Pressing the Down Arrow Key will turnthe outlet off. A single “beep” will confirm the reception of thecommand.
Auxiliary Outlet Control Lights
88
GreenSmart™ - SIT IPI System
Copyright © 3/5/2009 - Travis Industries Certified Factory Training Program
Key Lock
This function will lock the keys to avoid unsupervised operation.To activate this function, press the MODE and UP Keys at thesame time (Fig. 18). To de-activate this function, press the MODEand UP Keys at the same time.
Key Lock Mode
89
GreenSmart™ - SIT IPI System
Copyright © 3/5/2009 - Travis Industries Certified Factory Training Program
Low Battery Power Detection
Transmitter
The life span of the remote control batteries depends on variousfactors: quality fo the batteries used, the number of ignitions of theappliance, the number of changes to the room thermostat set point,etc. When the transmitter batteries are low, and Icon will appearon the LCD display of the transmitter (Fig.19) before all batterypower is lost. When the batteries are replaced this Icon will disappear.
Low Battery Indicator
90
GreenSmart™ - SIT IPI System
Copyright © 3/5/2009 - Travis Industries Certified Factory Training Program
SIT Valve For IPI System
91
GreenSmart™ - SIT IPI System
Copyright © 3/5/2009 - Travis Industries Certified Factory Training Program
Valve OFF
92
GreenSmart™ - SIT IPI System
Copyright © 3/5/2009 - Travis Industries Certified Factory Training Program
Pilot Ignition
93
GreenSmart™ - SIT IPI System
Copyright © 3/5/2009 - Travis Industries Certified Factory Training Program
Main Burner ON
94
GreenSmart™ - SIT IPI System
Copyright © 3/5/2009 - Travis Industries Certified Factory Training Program
95
GreenSmart™ - SIT IPI System
Copyright © 3/5/2009 - Travis Industries Certified Factory Training Program
96
GreenSmart™ - SIT IPI System
Copyright © 3/5/2009 - Travis Industries Certified Factory Training Program
97
GreenSmart™ - SIT IPI System
Copyright © 3/5/2009 - Travis Industries Certified Factory Training Program
98
GreenSmart™ - SIT IPI System
Copyright © 3/5/2009 - Travis Industries Certified Factory Training Program
99
GreenSmart™ - SIT IPI System
Copyright © 3/5/2009 - Travis Industries Certified Factory Training Program
100
GreenSmart™ - SIT IPI System
Copyright © 3/5/2009 - Travis Industries Certified Factory Training Program
101
GreenSmart™ - SIT IPI System
Copyright © 3/5/2009 - Travis Industries Certified Factory Training Program
102
GreenSmart™ - SIT IPI System
Copyright © 3/5/2009 - Travis Industries Certified Factory Training Program
103
GreenSmart™ - SIT IPI System
Copyright © 3/5/2009 - Travis Industries Certified Factory Training Program
104
GreenSmart™ - SIT IPI System
Copyright © 3/5/2009 - Travis Industries Certified Factory Training Program