green design
DESCRIPTION
Green Design. aka Design for Environment, Sustainable Design. Sustainable?. Rates of use of renewable resources should not exceed their rates of regeneration; Rates of use of nonrenewable resources should not exceed the rate at which sustainable renewable substitutes are developed; - PowerPoint PPT PresentationTRANSCRIPT
![Page 1: Green Design](https://reader036.vdocuments.us/reader036/viewer/2022062816/56815058550346895dbe57fb/html5/thumbnails/1.jpg)
Green Designaka Design for Environment,
Sustainable Design
![Page 2: Green Design](https://reader036.vdocuments.us/reader036/viewer/2022062816/56815058550346895dbe57fb/html5/thumbnails/2.jpg)
![Page 3: Green Design](https://reader036.vdocuments.us/reader036/viewer/2022062816/56815058550346895dbe57fb/html5/thumbnails/3.jpg)
![Page 4: Green Design](https://reader036.vdocuments.us/reader036/viewer/2022062816/56815058550346895dbe57fb/html5/thumbnails/4.jpg)
![Page 5: Green Design](https://reader036.vdocuments.us/reader036/viewer/2022062816/56815058550346895dbe57fb/html5/thumbnails/5.jpg)
Sustainable?
• Rates of use of renewable resources should not exceed their rates of regeneration;
• Rates of use of nonrenewable resources should not exceed the rate at which sustainable renewable substitutes are developed;
• Rates of pollution emission should not exceed the assimilative capacity of the environment
![Page 6: Green Design](https://reader036.vdocuments.us/reader036/viewer/2022062816/56815058550346895dbe57fb/html5/thumbnails/6.jpg)
Deforestation
![Page 7: Green Design](https://reader036.vdocuments.us/reader036/viewer/2022062816/56815058550346895dbe57fb/html5/thumbnails/7.jpg)
![Page 8: Green Design](https://reader036.vdocuments.us/reader036/viewer/2022062816/56815058550346895dbe57fb/html5/thumbnails/8.jpg)
![Page 9: Green Design](https://reader036.vdocuments.us/reader036/viewer/2022062816/56815058550346895dbe57fb/html5/thumbnails/9.jpg)
![Page 10: Green Design](https://reader036.vdocuments.us/reader036/viewer/2022062816/56815058550346895dbe57fb/html5/thumbnails/10.jpg)
![Page 11: Green Design](https://reader036.vdocuments.us/reader036/viewer/2022062816/56815058550346895dbe57fb/html5/thumbnails/11.jpg)
Environmental Impact
• Environmental impact=Population x GDP/person x environmental impact/unit of per capita GDP
![Page 12: Green Design](https://reader036.vdocuments.us/reader036/viewer/2022062816/56815058550346895dbe57fb/html5/thumbnails/12.jpg)
Life Cycle Assessment (LCA)
• Describe which emissions will occur and which raw materials are used during the life of a product. This is usually referred to as the inventory step.
• Assess what the impacts of these emissions and raw material depletions are. This is referred to as the impact assessment step.
![Page 13: Green Design](https://reader036.vdocuments.us/reader036/viewer/2022062816/56815058550346895dbe57fb/html5/thumbnails/13.jpg)
Life Cycle Assessment is multidisciplinary
• Technosphere: The modelling of technical systems, such as production processes, transport processes
• Ecosphere: The modelling of environmental mechanisms ("what happens with an emission?").
• Valuesphere: Dealing with subjective choices. This includes weighting of impact categories, selection of time horizon.
![Page 14: Green Design](https://reader036.vdocuments.us/reader036/viewer/2022062816/56815058550346895dbe57fb/html5/thumbnails/14.jpg)
![Page 15: Green Design](https://reader036.vdocuments.us/reader036/viewer/2022062816/56815058550346895dbe57fb/html5/thumbnails/15.jpg)
LCA for new Honda Insight(simplified: energy only)
Al Steel Rubber MPG Gasoline Total Kwh
Saved Kwh
Kg mat’l used in Honda
336 336 168
Kwh per Kg to produce
6.6 .66 3
Kwh/gal 34.8
Honda, Kwh LCA
2218 222 504 51 68200 71143 87023
Subaru Kwh LCA
0 0 0 22 158166 158166
![Page 16: Green Design](https://reader036.vdocuments.us/reader036/viewer/2022062816/56815058550346895dbe57fb/html5/thumbnails/16.jpg)
LCA for Insight (cont.)
• Each Kwh of energy saved, prevents .65 kg of CO2 being added to the atmosphere.
• So, saving 87023 Kwh over the lifetime of the Insight means 56 metric tons less CO2 in the atmosphere
• For comparison, the world adds 30 billion tons of CO2 per year
![Page 17: Green Design](https://reader036.vdocuments.us/reader036/viewer/2022062816/56815058550346895dbe57fb/html5/thumbnails/17.jpg)
1. Don’t design products, but life cyclesDon’t design "green" products. Instead, design environmentally sound product life cycles. Think about all material inputs and energy use of a product during its whole life cycle. From cradle to grave, or even better from cradle to cradle! One way to document your findings is the MET matrix (Materials, Energy, Toxicity). Enter some of the most important facts in a matrix:
MET Materials Energy Toxicity
Production
Use
Disposal
![Page 18: Green Design](https://reader036.vdocuments.us/reader036/viewer/2022062816/56815058550346895dbe57fb/html5/thumbnails/18.jpg)
2. Don’t design products, but services
People do not always want a product. They want a solution for a certain problem. A service rather than a product can be the right solution. For example, a car sharing system is a solution for people that need a car occasionally. Zipcar is becoming popular in Boston, where parking space is at a premium. You can use one of the cars in your neighborhood when you need it.
![Page 19: Green Design](https://reader036.vdocuments.us/reader036/viewer/2022062816/56815058550346895dbe57fb/html5/thumbnails/19.jpg)
3. Natural materials are not always better
It is a common belief that "natural" materials are more environmentally friendly than "artificial" or man made materials. Is this always true?
Of course, the production of 1 kg of wood causes less emissions
than the production of 1 kg of plastic. But what about the paint to preserve the wood,
the energy needed to dry, the sawing losses? In some products, you would need about ten times as much
wood as plastic. Plastics can often be recycled, wood cannot.
![Page 20: Green Design](https://reader036.vdocuments.us/reader036/viewer/2022062816/56815058550346895dbe57fb/html5/thumbnails/20.jpg)
4. Energy consumption: often underestimated
If a product consumes energy in the use phase, it’s likely that its energy consumption has greater environmental impact than the materials used. 10 kWh electricity needs 2 kg of oil. Making 1 kg of plastic needs 1.5 to 2.5 kg of oil. A coffee machine uses 300 kWh electricity during its lifetime, equal to 60 kg of oil. For the production of the machine less than 1 kg of plastic is used
![Page 21: Green Design](https://reader036.vdocuments.us/reader036/viewer/2022062816/56815058550346895dbe57fb/html5/thumbnails/21.jpg)
5. Increase product life time
You can influence the product life time in several ways: Make it more durable from a technical point of view,
or make it upgradeable (allowing installation of the latest chip in a computer).
More importantly, try to design the product in such a way that
people will feel attached to it. Many products are thrown away not because they are broken, but because owners got bored with them.
![Page 22: Green Design](https://reader036.vdocuments.us/reader036/viewer/2022062816/56815058550346895dbe57fb/html5/thumbnails/22.jpg)
6. Use a minimum of material
Using less materials may seem obvious, but it can be difficult to do. Often you can reduce the amount of material by critically looking at dimensions, required strength and production techniques.
-shape (ribs, bosses, forming of sheet metal) reduce req’d thickness-substitution of materials with less environmental impact
It can even be beneficial to use materials that have a high environmental load per kilogram, if you can save weight. This is particularly true in transport, where less weight means less fuel consumption.
![Page 23: Green Design](https://reader036.vdocuments.us/reader036/viewer/2022062816/56815058550346895dbe57fb/html5/thumbnails/23.jpg)
7. Make your product recyclable
Most products can be recycled, but relatively few are.
You can increase the chance that the product will be recycled: Products that can be disassembled easily
and have a high yield are preferred for recycling. Metals can be effectively recycled.
-Copper components reduce recyclability of steel-Recycling aluminum saves a lot of energy compared to smelting
Make sure thermoplastics can be recycled:-Do not use a lacquer or paper stickers on plastic-Do not combine different plastics.
Thermosets cannot be effectively recycled.Paper can be recycled, but fiber length decreases with each pass
![Page 24: Green Design](https://reader036.vdocuments.us/reader036/viewer/2022062816/56815058550346895dbe57fb/html5/thumbnails/24.jpg)
8. Use recycled materials
Do not only make your product recyclable, but use recycled materials.
Don’t specify “virgin material”; specify performance instead of source.
Demand for recycled materials encourages recycling.
And there are energy economies:Aluminum from ore requires 13 kwh/kgRecycled aluminum requires .65 kwh/kg
Virgin rubber requires 10 kwh/kgRecycled rubber requires 3 kwh/kg
![Page 25: Green Design](https://reader036.vdocuments.us/reader036/viewer/2022062816/56815058550346895dbe57fb/html5/thumbnails/25.jpg)
9. Replace toxic and hazardous materials
Aramid fibers replace asbestos in automotive brake liningsHydrofluorocarbons replace chlorofluorocarbons in air conditionersHydrofluoroalkanes replace chlorofluorocarbons in aerosol cansCitrus-oil cleaners replace toxics like CCl4Silver replaces lead in plumbing solderZinc and nickel replace cadmium plating for screws and nuts
![Page 26: Green Design](https://reader036.vdocuments.us/reader036/viewer/2022062816/56815058550346895dbe57fb/html5/thumbnails/26.jpg)
10. Ask stupid questions!
Very often decisions are based on common practice: "We have always done it this way and it has always worked well".
Remember that Design for Environment is relatively new. Many existing products were designed without consideration
of their environmental impact.
You can make huge improvements in the environmental performance of products, with consequential cost savings, by simply asking "Why?".
![Page 27: Green Design](https://reader036.vdocuments.us/reader036/viewer/2022062816/56815058550346895dbe57fb/html5/thumbnails/27.jpg)
LCA Software• Most projects involve such a large number of inputs and
outputs, that software has become available to keep track of it all.
• One package is SimaPro, available from Pre Consultants (www.pre.nl)
• Another is TEAM, from Ecobilan (www.ecobilan.com/uk_team.php)
• A longer list at www.howproductsimpact.net/box/home/lcasoftware.htm
![Page 28: Green Design](https://reader036.vdocuments.us/reader036/viewer/2022062816/56815058550346895dbe57fb/html5/thumbnails/28.jpg)
You can contact sustainable design organizations
A couple of them are:
O2: an international organization. The US affiliate is at www.O2-usa.org
Centre for Sustainable Design, UK at www.cfsd.org.uk
![Page 29: Green Design](https://reader036.vdocuments.us/reader036/viewer/2022062816/56815058550346895dbe57fb/html5/thumbnails/29.jpg)
Bibliography
• Design For Environment. T. E. Graedel and Allenby, B. R. Prentice Hall 1998.
• Cradle to Cradle: Remaking the Way We Make Things. W. McDonough and M. Braungart, 2002.
• Natural Capitalism: Creating the Next Industrial Revolution - Paul Hawken, Amory Lovins, L. Hunter Lovins