great parts for great engines clevite … · great parts for great engines gen iii & early iv...

HEAVY DUTY REPLACEMENT PARTS OFFERING AFTERMARKET

GREAT PARTS FOR GREAT ENGINESGEN III & EARLY IV SERIES 60®

CLEVITE REPLACEMENT PARTS FOR

The Detroit Diesel® Series 60® engines proved an immediate success from the start of production in 1987 – and in the 20+ years that followed, more than one million engines were produced. For 12 of those years it claimed the position as the most popular truck engine in the world. Available in 11.1L, 12.7L and 14.0L displacements, the Series 60 was the first production heavy duty diesel with fully integrated electronic controls and it offered excellent fuel optimization. It is still considered one of the best engines in the market after more than two decades.

The Series 60 transitioned successfully into off-highway markets as well. It delivered up to 825 horsepower and was available for Truck, Bus, Construction & Industrial, Gen Sets, and Marine applications.

The B50 life (the point which 50% of the engines are still running and 50% require a rebuild) of a Series 60 diesel engine is 1.2 million miles – that’s the highest in the heavy duty industry.

With this type of endurance, it makes economic sense to rebuild these engines with the right parts so you can ensure the same longevity experienced on the original build. MAHLE Clevite now offers sleeve assemblies and complete engine kits for the 12.7L Gen III and Early Gen IV engines.

Liner: Patented design for increased strength The new Clevite® liner design (patent pending) features a non-directional “High-Flow Liner Cooling Gallery” that increases stiffness and reduces liner distortion. To ensure these liners exhibit increased wear resistance and limited thermal growth in the high temperature operating environments, premium Bainatic materials are used. Using Bainatic materials instead of gray cast-iron material increases the overall cost of production, however, the benefits greatly outweigh the cost.

Piston: Crown-Forged steel crown with a phosphate coating The piston includes a manganese phosphate coating for two reasons. First, it serves as a soft coating that “wicks” oil into

the pin joint and aids lubrication of the pin bore. The coating process actually etches the base material and the phosphate, which is a soft crystal, grows on the etched surface. One small drop of oil on the phosphate coating quickly expands over a large area as the oil is absorbed. The phosphate is compressed by the pin and is retained by the micro peaks and valleys [~10 microns] of the etched surface preventing an unwanted steel to steel contact.

Second, it serves as a rust preventative until installation. This is the reason the whole piston is coated and not the just the pin bore.

Rings: Chrome-faced for long life Both compression rings are chrome-faced ductile iron to ensure long life and durability. Piston Oilers: Included for Upgrade All Clevite sleeve assemblies include a new piston oiler and bolt for engine upgrades.

Piston Pins: Two different pin designs The two pin designs available for the 11.1L and 12.7L are referred to as light and heavy. A light pin has a 1.020”/26mm center hole and the heavy pin has a .860”/22mm center hole.

Detroit Diesel® and Series 60® are registered trademarks of the Detroit Diesel Corporation. These trademarks and the Detroit Diesel part references are used only for reference to the parts they replace. These products are not made or authorized by Detroit Diesel Corporation.

GREAT PARTSFOR GREAT ENGINES!

2 | CLEVITE® REPLACEMENT PARTS FOR SERIES 60

ENGINE KITS

Qty Part # Description 468-

1094

468-

1095

468-

1096

468-

1097

468-

1098

468-

1099

468-

1100

468-

1101

468-

5094

468-

5095

468-

5096

468-

5097

468-

5098

468-

5099

468-

5100

468-

5101

6 226-1990 Cylinder Kit [OE#23532561] 22mm Heavy Pin, 15.0:1 CR • • • •

6 226-1991 Cylinder Kit [OE#23532883] 26mm Light Pin, 15.0:1 CR, Before 9/02 • • • •

6 226-1992 Cylinder Kit [OE#23532562] 22mm Heavy Pin, 16.5:1 CR • • • •

6 226-1993 Cylinder Kit [OE#23532885] 26mm Light Pin, 16.5:1 CR, Before 9/02 • • • •

1 MS-2093P* Main Bearing Set [OE#8929680(1) + 8929670(6)] • • • • • • • • • • • • • • • •

1 TW-600S Thrust Washer Set [OE#8929085(2)] • • • • • • • • • • • • • • • •6 CB-1836P* Connecting Rod Bearing Set

[OE#23526142] • • • • • • • • • • • • • • • •1 FS54157 Set, Overhaul-Full Set

[OE#23532720] HS & CS may be substituted

• • • • • • • •1 HS54157 Set, Head [OE#23532333] • • • • • • • •1 VS50278 Set, Valve Cover [OE#23516322]

Gray, 4 Bolt • • • • • • • •1 VS50404 Set, Valve Cover [OE#23522269]

Black, 10 Bolt ○ ○ ○ ○ ○ ○ ○ ○1 OS32204 Set, Oil Pan [OE#8929102] Gray • • • • • • • • • • • • • • • •1 67744 Seal, Crankshaft Rear

[OE#23513578] Double Lip • • • •1 67745 Seal, Crankshaft Front

[OE#23518355] • • • •1 GS33539 Bolt Set, Cylinder Head

[OE#23530768(38)] • • • • • • • •6 GS33448 Injector O-Ring Set

[OE#’s 23511870(1) + 5234702(1) + 5234699(2) + 5104701(1)] • • • • • • • •

7 SH-1986 Camshaft Bearing [OE#8929690] 2 shells per package • • • • • • • •

* Undersize substitutions available○ Optional, contact Customer Service

11.1L & 12.7L “STANDARD” AND “PREMIUM” INFRAME AND OVERHAUL KITSMAHLE Clevite replacement kits for the Detroit Diesel Series 60® are offered in two levels – standard and premium.

� Standard kits [listed in black] do not include rocker cover gaskets, injector o-rings, head bolts, cam bearings or seals – they must be purchased separately.

� Premium kits [listed in blue] include the rocker cover gaskets, injector o-rings, head bolts, cam bearings and seals.

CLEVITE® REPLACEMENT PARTS FOR SERIES 60 | 3

INFRAME ENGINE KITS

Qty Part # 468-

5104

468-

5105

468-

5106

468-

5107

468-

5108

468-

5109

468-

5110

468-

5111

468-

5112

468-

5113

468-

5114

468-

5115

468-

5116

468-

5117

468-

5118

468-

5119

468-

5120

468-

5121

468-

5122

468-

5123

468-

5124

468-

5125

468-

5126

468-

5127

6 226-2043 • • • • • •6 226-2044 • • • • • •6 226-2045 • • • • • •6 226-2046 • • • • • •1 MS-2093P* • • • • • • • •1 MS-2310P* • • • • • • • •1 MS-2313P* • • • • • • • •1

TW-600S/TW-600S-10 • • • • • • • •

1 TW-696S • • • • • • • •1 TW-700S • • • • • • • •6 CB-1902P* • • • • • • • • • • • • • • • • • • • • • • • •1 HS54157 • • • • • • • • • • • • • • • • • • • • • • • •1 OS32382 • • • • • • • • • • • • • • • • • • • • • • • •1 OS32204 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○1 VS50278 • • • • • • • • • • • •1 VS50404 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○1 67745 • • • • • • • • • • • •1 67744 • • • • • • • • • • • •1 GS33539 • • • • • • • • • • • •6 GS33633 • • • • • • • • • • • •7 SH-1986 • • • • • • • • • • • •

*Undersize substitutions available○ Optional, contact Customer Service

14.0L “STANDARD” AND “PREMIUM” INFRAME KITSMAHLE Clevite replacement kits for the Detroit Diesel Series 60® are offered in two levels – standard and premium.




OVERHAUL ENGINE KITS

Qty Part # 468-

1104

468-

1105

468-

1106

468-

1107

468-

1108

468-

1109

468-

1110

468-

1111

468-

1112

468-

1113

468-

1114

468-

1115

468-

1116

468-

1117

468-

1118

468-

1119

468-

1120

468-

1121

468-

1122

468-

1123

468-

1124

468-

1125

468-

1126

468-

1127

6 226-2043 • • • • • •6 226-2044 • • • • • •6 226-2045 • • • • • •6 226-2046 • • • • • •1 MS-2093P* • • • • • • • •1 MS-2310P* • • • • • • • •1 MS-2313P* • • • • • • • •1

TW-600S/TW-600S-10 • • • • • • • •

1 TW-696S • • • • • • • •1 TW-700S • • • • • • • •6 CB-1902P* • • • • • • • • • • • • • • • • • • • • • • • •1 FS54157A • • • • • • • • • • • • • • • • • • • • • • • •1 OS32382 • • • • • • • • • • • • • • • • • • • • • • • •1 OS32204 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○1 VS50278 • • • • • • • • • • • •1 VS50404 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○1 67745 • • • • • • • • • • • •1 67744 • • • • • • • • • • • •1 GS33539 • • • • • • • • • • • •- GS33633 ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲

7 SH-1986 • • • • • • • • • • • •*Undersize substitutions available○ Optional, contact Customer Service▲ Included in FS set

14.0L “STANDARD” AND “PREMIUM” OVERHAUL KITSMAHLE Clevite replacement kits for the Detroit Diesel Series 60® are offered in two levels – standard and premium.




ENGINE KITSPART # DESCRIPTION APPLICATION NOTES

468-1082 Overhaul Kit 11.1L, 12.L, 226-1938, Crownless 2.5mm, Non-TLC, Narrow

468-1083 Overhaul Kit 11.1L, 12.L, 226-1941, Crownless 3.5mm, Non-TLC, Narrow

468-1084 Overhaul Kit 11.1L, 12.L, 226-1938, Crownless 2.5mm, Non-TLC, Wide

468-1085 Overhaul Kit 11.1L, 12.L, 226-1941, Crownless 3.5mm, Non-TLC, Wide

468-1086 Overhaul Kit 11.1L, 12.L, 226-1937, Crownless 2.5mm, TLC, Narrow

468-1087 Overhaul Kit 11.1L, 12.L, 226-1940, Crownless 3.5mm, TLC, Narrow

468-1088 Overhaul Kit 11.1L, 12.L, 226-1937, Crownless 2.5mm, TLC, Wide

468-1089 Overhaul Kit 11.1L, 12.L, 226-1940, Crownless 3.5mm, TLC, Wide

468-1094 Overhaul Kit 11.1L, 12.L, 226-1990, Premium Kit 15.0:1 CR, 22mm, Heavy Pin

468-1095 Overhaul Kit 11.1L, 12.L, 226-1990, Basic Kit 15.0:1 CR, 22mm, Heavy Pin

468-1096 Overhaul Kit 11.1L, 12.L, 226-1991, Basic Kit 15.0:1 CR, 26mm, Light Pin, Before 9/02

468-1097 Overhaul Kit 11.1L, 12.L, 226-1992, Basic Kit 16.5:1 CR, 22mm, Heavy Pin

468-1098 Overhaul Kit 11.1L, 12.L, 226-1993, Basic Kit 16.5:1 CR, 26mm, Light Pin, Before 9/02

468-1099 Overhaul Kit 11.1L, 12.L, 226-1991, Premium Kit 15.0:1 CR, 26mm, Light Pin, Before 9/02

468-1100 Overhaul Kit 11.1L, 12.L, 226-1992, Premium Kit 16.5:1 CR, 22mm, Heavy Pin

468-1101 Overhaul Kit 11.1L, 12.L, 226-1993, Premium Kit 16.5:1 CR, 26mm, Light Pin, Before 9/02

468-1104 Overhaul Kit 14.0L, 226-2043, Basic Kit 15.0:1 CR, Early Mains




468-1108 Overhaul Kit 14.0L, 226-2043, Basic Kit 15.0:1 CR, Main Notched




468-1112 Overhaul Kit 14.0L, 226-2043, Basic Kit 15.0:1 CR, Main Unnotched




468-1116 Overhaul Kit 14.0L, 226-2043, Premium Kit 15.0:1 CR, Early Mains




468-1120 Overhaul Kit 14.0L, 226-2043, Premium Kit 15.0:1 CR, Main Notched




468-1124 Overhaul Kit 14.0L, 226-2043, Premium Kit 15.0:1 CR, Main Unnotched




468-5082 Inframe Kit 11.1L, 12.L, 226-1938, Crownless 2.5mm, Non-TLC, Narrow

468-5083 Inframe Kit 11.1L, 12.L, 226-1941, Crownless 3.5mm, Non-TLC, Narrow

468-5084 Inframe Kit 11.1L, 12.L, 226-1938, Crownless 2.5mm, Non-TLC, Wide

468-5085 Inframe Kit 11.1L, 12.L, 226-1941, Crownless 3.5mm, Non-TLC, Wide


ENGINE KITS CONT’DPART # DESCRIPTION APPLICATION NOTES

468-5086 Inframe Kit 11.1L, 12.L, 226-1937, Crownless 2.5mm, TLC, Narrow

468-5087 Inframe Kit 11.1L, 12.L, 226-1940, Crownless 3.5mm, TLC, Narrow

468-5088 Inframe Kit 11.1L, 12.L, 226-1937, Crownless 2.5mm, TLC, Wide

468-5089 Inframe Kit 11.1L, 12.L, 226-1940, Crownless 3.5mm, TLC, Wide

468-5094 Inframe Kit 12.7L, 226-1990, Premium Kit 15.0:1 CR, 22mm, Heavy Pin

468-5095 Inframe Kit 12.7L, 226-1990, Basic Kit 15.0:1 CR, 22mm, Heavy Pin

468-5096 Inframe Kit 12.7L, 226-1991, Basic Kit 15.0:1 CR, 26mm, Light Pin, Before 9/02

468-5097 Inframe Kit 12.7L, 226-1992, Basic Kit 16.5:1 CR, 22mm, Heavy Pin

468-5098 Inframe Kit 12.7L, 226-1993, Basic Kit 16.5:1 CR, 26mm, Light Pin, Before 9/02

468-5099 Inframe Kit 12.7L, 226-1991, Premium Kit 15.0:1 CR, 26mm, Light Pin, Before 9/02

468-5100 Inframe Kit 12.7L, 226-1992, Premium Kit 16.5:1 CR, 22mm, Heavy Pin

468-5101 Inframe Kit 12.7L, 226-1993, Premium Kit 16.5:1 CR, 26mm, Light Pin, Before 9/02

468-5104 Inframe Kit 14.0L, 226-2043, Basic Kit 15.0:1 CR, Early Mains




468-5108 Inframe Kit 14.0L, 226-2043, Basic Kit 15.0:1 CR, Main Notched




468-5112 Inframe Kit 14.0L, 226-2043, Basic Kit 15.0:1 CR, Main Unnotched




468-5116 Inframe Kit 14.0L, 226-2043, Premium Kit 15.0:1 CR, Early Mains




468-5120 Inframe Kit 14.0L, 226-2043, Premium Kit 15.0:1 CR, Main Notched




468-5124 Inframe Kit 14.0L, 226-2043, Premium Kit 15.0:1 CR, Main Unnotched




See pages 3,4 &5 for more detailed kit information.


CYLINDER COMPONENTSPART # DESCRIPTION NOTES OE REFERENCE

224-3305 Piston Skirt 11.1L, 12.7L + 50 Series 8.5L; Gen 1,2, For Cross Head Pistons, Ductile Iron 23516681

224-3581 Piston Crown 11.1L, 12.7L + 50 Series 8.5L; Ferrotherm 23530599

224-3582 Piston Crown 11.1L, 12.7L + 50 Series 8.5L; Ferrotherm 23530601

224-3583 Skirt 11.1L, 12.7L + 50 Series 8.5L; Gen 3, Aluminum, Used with Forged Crown 23521802

224-3627 Piston Assembly 11.1L, 12.7L + 50 Series 8.5L; 22mm, Heavy Pin, 15.0:1 CR, Crown Marked 23530599

23530666

224-3628 Piston Assembly 11.1L, 12.7L + 50 Series 8.5L; 26mm, Light Pin, 15.0:1 CR, Before 9/02, Crown Marked 23530599

23532882

224-3629 Piston Assembly 11.1L, 12.7L + 50 Series 8.5L; 22mm, Heavy Pin, 16.5:1 CR, Crown Marked 23530601/23530727

23530668

224-3630 Piston Assembly 11.1L, 12.7L + 50 Series 8.5L; 26mm, Light Pin, 16.5:1 CR, Before 9/02, Crown Marked 23530601/23530727

23532884

224-3738 Piston Assembly 14.0L; 15.0:1 CR, Bushingless 23530660, 23530596

224-3738X Piston Crown 14.0L; 15.0:1 CR, Bushingless 23530595

224-3739 Piston Assembly 14.0L; 16.0:1 CR, Oval, Bushingless 23530662, 23530598

224-3739X Piston Crown 14.0L; 16.0:1 CR, Oval, Bushingless 23530597

224-3740 Piston Assembly 14.0L; 16.0:1 CR, Cut Back 23530664, 23527775

224-3740X Piston Crown 14.0L; 16.0:1 CR, Cut Back 23527774

224-3741 Piston Assembly 14.0L; 15.1:1 CR, Marine 3mm Top Ring 23533453. 23530767

224-3741X Piston Crown 14.0L; 15.1:1 CR, Marine 3mm Top Ring 23530766

224-3743X Skirt 14.0L 23529997

226-1937 Sleeve Assembly 11.1L, 12.7L + 50 Series 8.5L; 2.5mm TLC; Crownless 23532557/23532555

226-1938 Sleeve Assembly 11.1L, 12.7L + 50 Series 8.5L; 2.5mm Non-TLC; Crownless 23519625

226-1940 Sleeve Assembly 11.1L, 12.7L + 50 Series 8.5L; 3.5mm TLC; Crownless 23523952/23532556

226-1941 Sleeve Assembly 11.1L, 12.7L + 50 Series 8.5L; 3.5mm Non-TLC; Crownless 23519637/23532591

226-1990 Cylinder Kit 11.1L, 12.7L + 50 Series 8.5L; 15.0:1 CR, 22mm, Heavy Pin 23532561

226-1991 Cylinder Kit 11.1L, 12.7L + 50 Series 8.5L; 15.0:1 CR, 26mm, Light Pin, Before 9/02 23532883

226-1992 Cylinder Kit 11.1L, 12.7L + 50 Series 8.5L; 15.5:1 CR, 22mm, Heavy Pin, 23532562

226-1993 Cylinder Kit 11.1L, 12.7L + 50 Series 8.5L; 16.5:1 CR, 26mm, Light Pin, Before 9/02 23537594

226-2043 Cylinder Kit 14.0L; 15.0:1 CR , 99-01, Bushingless, Non-EGR 23530661

226-2044 Cylinder Kit 14.0L; 16.0:1 CR, Oval, 99-06 Non-EGR-US Engine 23530663

226-2045 Cylinder Kit 14.0L; 16.0:1 CR, Cut back, 02 to 04 EGR, US Engine 23530665

226-2046 Cylinder Kit 14.0L; 15.1:1 CR, Marine 3mm Top Ring 23533452

226-4558 Cylinder Liner 11.1L, 12.7L + 50 Series 8.5L; Non-TLC 23532361/23532468

226-4573 Cylinder Liner 11.1L, 12.7L + 50 Series 8.5L; Clevite Patent Pending TLC design 23531502/23531249

226-4583 Cylinder Liner 14.0L; Clevite Patent Pending TLC design 23531504

247-5069 Crankshaft 11.1L; 12 Hole 8929238/23515597

247-5070 Crankshaft 12.7L; 12 Hole, 47mm Rod Bearings 8929239/23515599

247-5223 Crankshaft 12.7L; Std. Mains, .010 Rods, Wide Rod Journal, 6 Hole 23515598

247-5224 Crankshaft 14.0L 23527225

S41891 Cylinder Ring Set 11.1L, 12.7L + 50 Series 8.5L; 2.5mm Top Ring 23503747

S41892 Cylinder Ring Set 11.1L, 12.7L + 50 Series 8.5L; 3.5mm Top Ring 23505729

S42132 Cylinder Ring Set 14.0L; 3mm Top Ring 23533510

S42133 Cylinder Ring Set 14.0L 23531252


CYLINDER COMPONENTS BEARINGSPART # DESCRIPTION NOTES OE REFERENCE

CB-1662P Con. Rod Set 11.1L, 12.7L + 50 Series 8.5L; 43.29mm Wide, Early Narrow Style, 50mm Oil Hole

8929710/Up 8929556(1) + lwr 8929557(1)

CB-1662P-10 Con. Rod Set 11.1L, 12.7L + 50 Series 8.5L; 43.29mm Wide, Early Narrow Style, 50mm Oil Hole

8929711/Up 8929714(1) + lwr 8929715(1)

CB-1792P Con. Rod Set 11.1L, 12.7L + 50 Series 8.5L; 47.37mm Wide, Grooved Upper, Late Wide style

23515581

CB-1792P-.25mm Con. Rod Set 11.1L, 12.7L + 50 Series 8.5L; 47.37mm Wide, Grooved Upper, Late Wide style

23515582

CB-1792P-.50mm Con. Rod Set 11.1L, 12.7L + 50 Series 8.5L; 47.37mm Wide, Grooved Upper, Late Wide style

23515583

CB-1836P Con. Rod Set 11.1L, 12.7L + 50 Series 8.5L; 47.14mm Wide, No Groove in Upper, Drilled Rod

23535745(2)

CB-1836P-.25mm Con. Rod Set 11.1L, 12.7L + 50 Series 8.5L; 47.14mm Wide, No Groove in Upper, Drilled Rod

23535746(2)

CB-1836P-.50mm Con. Rod Set 11.1L, 12.7L + 50 Series 8.5L; 47.14mm Wide, No Groove in Upper, Drilled Rod

23527063(2)

CB-1902P Con. Rod Set 14.0L; Drilled Upper & Lower 23535741(2)

CB-1902P-.25mm Con. Rod Set 14.0L; Drilled Upper & Lower 23535742(2)

CB-1902P-.50mm Con. Rod Set 14.0L; Drilled Upper & Lower 23532254(2)

MS-2092P Main Set 50 Series 8.5L 8929670(4) + 8929680(1)

MS-2092P-10 Main Set 50 Series 8.5L 8929671(4) + 8929681(1)

MS-2092P-20 Main Set 50 Series 8.5L 8929672(4) + 8929682(1)

MS-2093P Main Set 11.1L, 12.7L, 14.0L; Uses TW-600S 8929680(1) + 8929670(6)/23533252(7) + 23533252(6) - 23533263(1)

MS-2093P-10 Main Set 11.1L, 12.7L, 14.0L; Uses TW-600S 8929681(1) + 8929671(6)

MS-2093P-20 Main Set 11.1L, 12.7L, 14.0L; Uses TW-600S 8929682(1) + 8929672(6)

MS-2310P Main Set 14.0L; w/Machined Notches, Uses TW-696S 23533252(7) + 23533259(7)

MS-2310P-10 Main Set 14.0L; w/Machined Notches, Uses TW-696S

MS-2310P-20 Main Set 14.0L; w/Machined Notches, Uses TW-696S

MS-2313P Main Set 14.0L; Without Machined Notches, Uses TW-700S

23533252(6) + 23533259(6) + 23532926(1) + 23533263(1)

MS-2313P-10 Main Set 14.0L; Without Machined Notches, Uses TW-700S

MS-2313P-20 Main Set 14.0L; Without Machined Notches, Uses TW-700S

SH-1986 Camshaft, Individual 11.1L, 12.7L, 14.0L + 50 Series 8.5L 8929690

TW-600S Thrust Washer Sets 11.1L, 12.7L, 14.0L; Set of 2, for MS-2093P 8929085(2)

TW-600S+10 Thrust Washer Sets 11.1L, 12.7L, 14.0L; Set of 2, for MS-2093P 8929085(.010)(2)

TW-696S Thrust Washer Sets 14.0L; W/Machined Notches, for MS-2310P 23530554(2) + 23530555(2)

TW-700S Thrust Washer Sets 14.0L; Without Machined Notches, for MS-2313P

8929085(4)


GASKETSPART # DESCRIPTION NOTES OE REFERENCE

54157 Set, Cylinder Head 11.1L, 12.7L, 14.0L; 8 Steam Hole 23530421

67744 Seal, Crankshaft Rear 11.1L, 12.7L, 14.0L + 50 Series 8.5L; Double Lip, Wet

23513578

67745 Seal, Crankshaft Front 11.1L, 12.7L, 14.0L + 50 Series 8.5L; Includes Repair Sleeve

23518355

B45895 Valve Stem Seal 11.1L, 12.7L, 14.0L + 50 Series 8.5L 23516483

B45914 Valve Stem Seal 11.1L, 12.7L, 14.0L + 50 Series 8.5L 23523930

CS54157A Set, Lower 11.1L, 12.7L, 14.0L + 50 Series 8.5L N/A

FS54157 Set, Overhaul-Full Set 11.1L, 12.7L; Consolidate Set 23532720/23532332/23512691

FS54157A Set, Overhaul-Full Set 14.0L; For EGR 23536443

GS33448 Injector O Ring Set 11.1L, 12.7L + 50 Series 8.5L; 1 Required Per Cylinder

23511870(1) +5234702(1) +5234699(2) +5104701(1)

GS33539 Bolt Set, Cylinder Head 11.1L, 12.7L, 14.0L; 38 Per Set 23530768(38)

GS33633 Injector O Ring Set 14.0L; For One Injector 23537111

HS54157 Set, Cylinder Head Set 11.1L, 12.7L, 14.0L ; Consolidate Set 23532333/ 23536442

MS19666 Set, Exhaust Manifold 11.1L, 12.7L, 14.0L + 50 Series 8.5L 23533983(3)

OS32204 Set, Oil Pan 11.1L, 12.7L, 14.0L ; Gray 8929102

OS32204-1 Set, Oil Pan 11.1L, 12.7L, 14.0L; Gray, Pan Gasket Only 8929102(1) +8929344(2) +8929347(2)

OS32382 Set, Oil Pan 11.1L, 12.7L, 14.0L; Black, 23522279(1) +23514465(1) + 23505992(1) +8929344(2) +8929347(1)

VS50278 Set, Valve Cover 11.1L, 12.7L, 14.0L; Gray, 4 Bolt 23516322

VS50404 Set, Valve Cover 11.1L, 12.7L, 14.0L + 50 Series 8.5L; Black, 10 Bolt

23522269

Victor Reinz and the Victor Reinz trademark are property of Dana Limited and used under license to MAHLE Clevite Inc.

ANCILLARY CONT’D

PART # DESCRIPTION NOTES OE REFERENCE

211-3313 Valve, Exhaust 11.1L, 12.7L, 14.0L + 50 Series 8.5L; 1.5760" Head Dia., .3421" Stem, 8.498" Lth. 30 Degree Seat, for Valves Marked H or U on Head, Valve Only, Order Locks Separately, (2)216-5001 Keepers

8929590/23501577

211-3345 Valve, Intake 11.1L, 12.7L, 14.0L + 50 Series 8.5L; 1.7320" Head Dia., .3421" Stem, 8.498" Lth., 30 Degree Seat, Valve Only, Order Locks Separate, Add (2)216-5001 Keepers

8929589/23501576

212-1462 Spring, Valve 11.1L, 12.7L, 14.0L + 50 Series 8.5L; Yellow Stripe, Intake & Exhaust, 14L from 2003

8929415

216-5001 Valve Locks 11.1L, 12.7L, 14.0L + 50 Series 8.5L 8929573

217-4076 Valve Guide 11.1L, 12.7L, 14.0L + 50 Series 8.5L 23518571

218-8002 Insert, Valve Seat 11.1L, 12.7L, 14.0L + 50 Series 8.5L; Exhaust, 1.6285" OD,1.357" ID, 0.249" Lth.

8929126

218-8002.010 Insert, Valve Seat 11.1L, 12.7L, 14.0L + 50 Series 8.5L; Exhaust, 1.6385" OD,1.357" ID, 0.249" Lth.

8929628


8929629

TURBOCHARGERS

ANCILLARY


PART # NOTES OE REFERENCE

098TC21003000 12.7L, 14.0L; With EGR 23534775

098TC21003100 12.7L, 14.0L; With EGR, Reman 23534775

098TC24130000 12.7L, 14.0L; Non-Wastegated 95-04 8929507, 8929797, 8929903, 23504967, 23504966

098TC24131000 12.7L, 14.0L; Non-Wastegated 95-04 8929435, 8929796, 8929902, 23503732

098TC24132000 12.7L, 14.0L; Non-Wastegated 95-04 23508410, 23508411

098TC24133000 12.7L, 14.0L; Non-Wastegated 95-04 23508405,23515894, 23518695, 23508406. 23528029, 23521167

098TC24136000 12.7L, 14.0L; Non-Wastegated 95-04 23516431, 23515635, 23515636

098TC24137000 12.7L, 14.0L; Non-Wastegated 95-04 23518588, 23518597, 23523197

098TC25592000 12.7L, 14.0L; Wastegated 95-04 23522188, 23522189, 23522190, 23522306, 23522312, 23522781, 23523040, 23523478, 23525462, 23525463, 23526016, 23526017, 23526271, 23526272, 23526679, 23526680, 23526681, 23526682, 23526683, 23526684, 23526685, 23526692, 23528052, 23528053, 23528054, 23528055, 23528058, 23528060, 23528062, 23528064, 23528066, 23528067, 23528069

098TC25606000 12.7L, 14.0L; Wastegated 95-04 23515635. 23518588, 23518597, 23528059

ANCILLARY CONT’D

TURBOCHARGERS

PART # DESCRIPTION NOTES OE REFERENCE


8929630

218-8003 Insert, Valve Seat 11.1L, 12.7L, 14.0L + 50 Series 8.5L; Intake, 1.8195" OD, 1.571" ID, 0.283" Lth

8929127

218-8003.010 Insert, Valve Seat 11.1L, 12.7L, 14.0L + 50 Series 8.5L; Intake, 1.8295" OD, 1.571" ID, 0.283" Lth

8929625


8929626


8929627

223-1845 Piston Pin 11.1L, 12.7L + 50 Series 8.5L; For Crosshead 8929087

223-1850 Piston Pin 11.1L, 12.7L + 50 Series 8.5L; 1.023"/26mm ID, Light, Lth. 4.170"/106mm

23521649

223-1851 Piston Pin 11.1L, 12.7L + 50 Series 8.5L; 0.866"/22mm ID, Heavy, Lth. 4.170"/106mm

23525168

223-1933 Piston Pin 14.0L; 4.319"/109.70mm Lth. 23539049

223-4000 Piston Oiler 11.1L, 12.7L, 14.0L + 50 Series 8.5L 23528493

223-5512 Piston Bolts 11.1L, 12.7L, 14.0L + 50 Series 8.5L 8929337

223-7207 O-Ring Kit 11.1L, 12.7L, 14.0L + 50 Series 8.5L 8929013(1 ) + 8929176(2)


ww

w.m

ahle-aftermarket.com

HD

-4-712

MAHLE Clevite Inc.

23030 MAHLE Drive

Farmington Hills, MI 48335

United States

Phone +1 (800) 338-8786

MAHLE Clevite Canada, ULC

3365 Mainway, Unit #2

Burlington, ON L7M 1A6

Canada

Phone +1 (800) 531-4847

Fax +1 (905) 335-5388

MAHLE Aftermarket S de RL de CV

Km. 53.750 Carretera México-Toluca

Zn Ind. Dona Rosa ,Letra E, Interior 1A

Col. Parque Industrial Lerma, 52000, Lerma, Mexico

Teléfono: +52 722 2624530,

Fax: +52 722 2624550

great parts for great engines clevite … · great parts for great engines gen iii & early iv...

Documents