great britain and ireland€¦ · matt knight, automation engineer arburg ltd warwick arburg ltd...
TRANSCRIPT
3
Introduction
Dear Customer,The trademark of the ARBURG ALLROUNDER is its versatility
and flexibility. It is important therefore that you, the end user,
should be able to obtain a full understanding and appreciation
of its full capability.
For this particular reason ARBURG Ltd have put together this booklet to offer you
and your technicians the possibility of participating in training courses which will
enable you to acquire all the skills required to work with the ALLROUNDER range
of injection moulding machines.
Contained within this booklet is the current ARBURG training programme subdi-
vided into different courses according to your specific requirements. These courses
cover a wide cross section of disciplines from the general practice of injection
moulding through to in depth theoretical and ‘hands on’ training on the ma-
chines.
Should you have questions or require any further information please do not
hesitate to contact us.
Yours faithfully
Colin Tirel
Managing Director
ARBURG LIMITED
4
Courses are arranged according
to demand. Please E-Mail your request
to [email protected] or telephone
01926 457000
Times and Duration
for courses at Warwick:
Day 1: 9.30–16.30
Day 2: 9.30–16.30
Times and Duration for courses at
customer’s premises:
Dependant on course and location.
Costs:
Two day course at ARBURG Ltd
£ 400.00 per delegate & VAT subject
to a minimum of 3 attendees.
Three day course at ARBURG Ltd.
£ 600.00 per delegate & VAT.
Included in the price is a detailed course
book, lunch and beverage subject to a
minimum of 3 attendees.
Two day course conducted at customer
premises in Wales and England £
1350.00 per course & VAT.
Three day courses at customer site
from £2000
Training courses conducted at cus-
tomer premises in Ireland and Scotland
prices upon request. Course enquiries
are also possible via our website.
Note:
All courses are available subject to
machine availability and a minimum
number of participants having regis-
tered.
Should you require advice on the suit-
ability of courses for your requirements
please contact either Mr. R Hambrook
(Service Manager) or Mr. Derek
Cheetham (Applications Engineer).
General course enquiries should be
made to Donna White.
All enquiries regarding training at
customer premises should be made to
Mr. R Hambrook.
Special bespoke machine training
courses or information seminars can
be arranged for individual customers
at our facility at a cost of £ 650 per
day irrespective of number of person-
nel but a maximum of 6 is recom-
mended.
Worldwide standards:
ARBURG places high demands on its
trainers. All our courses are carried
out according to a unified standard
worldwide.
General Information
5
Accommodation:
We have listed for your information
a list of local hotels and contact
telephone/fax numbers.:
It is the customer’s responsibility to
arrange their accommodation and the
payment of same.
In the case of late bookings we can of
course assist with hotel booking but
on the strict understanding that hotel
costs will be settled by the customer
on departure.
The Falstaff, Leamington Spa
Approx. 2 miles from ARBURG Ltd
Tel.: 01926 312044
Fax: 01926 450574
The Holiday Inn Express,
Warwick
Approx. 4 miles from ARBURG Ltd
Reservations: 0800 897121
The Angel, Leamington Spa
Approx. 2 miles from ARBURG Ltd
Tel.: 01926 881296
Premier Inn, Leamington Spa
Approx. 2 miles from ARBURG Ltd.
Tel.: 0044 8715279380
Travelodge, Leamington Spa
Approx. 2 miles from ARBURG Ltd.
Tel.: 0044 8719846239
Local Hotel Information
6
Spares Department: 01926 457021
Darren Hunt, Spares
Service Department: 01926 457031
Robin Hambrook, Service Manager
Roger Talbot, Service Controller
Kim Sharpe, Internal Engineer
Stephen Redman-Windsor,
Service Contract and Support
General: 01926 457000
Colin Tirel, Managing Director
Louise Horne, Finance Controller
Donna White, PA to the directors
Derek Cheetham, Applications Eng.
Matt Knight, Automation Engineer
ARBURG Ltd Warwick
ARBURG Ltd
Tachbrook Park Drive
Warwick CV34 6RH
Tel.: 01926 457000
Fax: 01926 457030
www.arburg.co.uk
E-Mail: [email protected]
ARBURG Ltd
Sales Department:
01926 457001
Simon Wrighton, Sales Director
David Kenny, New M/C Sales
Vince Crossan, New M/C Sales
Training Place/Address/Contact List
7
Basic courses p. 10
Introductory course on machine operation
Machine adjustment courses p. 11
Main course on machine adjustment and
programming
Service training p. 12-13
Electrical and hydraulic machine appreciation course
Plastics technology course p. 14
Clamp and injection data considerations and
applications
Information seminar p. 15
One-day seminars on the SELOGICA control and
ARBURG ALS host computer system
Courses on robotic systems p. 16
Six-axis robotic systems, MULTILIFT V /
MULTILIFT SELECT, MULTILIFT H
G
M
SC
KT
I
HP
We are also pleased to offer individualised courses upon request, with customer-specific content. These courses can be held either at your premises or at ARBURG.
Machine
Service
One-day seminar
Technology
Automation
Overview Courses
8
Course objective: Basic principles of injection moulding machines
and control systems
Target group: Those new to the injection moulding sector,
machine operators
Prerequisites: No previous knowledge required
Course duration: 2 days
Course fee: £ 400.00
Documents: Course folder with accompanying texts and CD
Note: To enhance your knowledge, we also recommend participation in the
machine adjustment courses
G Basic courses
Machine Control Code
ALLROUNDER A SELOGICA direct G-A d
ALLROUNDER E SELOGICA direct G-E
ALLROUNDER H SELOGICA direct G-H
ALLROUNDER GE SELOGICA direct G-GE
ALLROUNDER S SELOGICA direct G-S
Course content
• Design of the injection moulding machine
• Injection moulding process
• Basic principles of the control system and the control panels
• Typical plastics processing requirements
• Practical situations: starting / ending the injection moulding
process, troubleshooting / fault remedy, mould changes, changing
the moulding material with cylinder and screw cleaning
• Machine maintenance
Course description
9
Course objective: Adjustment an injection moulding
machine independently
Target group: Installation technicians, machine operator
Prerequisites: Basic knowledge of injection moulding
Course duration: 3 days
Course fee: £ 600.00
Documents: Course folder with accompanying texts and CD
MMachine adjustment courses
Machine Control Code
ALLROUNDER A SELOGICA direct M-A d
ALLROUNDER E SELOGICA direct M-E
ALLROUNDER H SELOGICA direct M-H
ALLROUNDER GE SELOGICA direct M-GE
ALLROUNDER S SELOGICA direct M-S
Course content
• Typical machine features
• Programming the control system
• Setting up the clamping unit and the injection unit
• Adopting the set values
• Quality monitoring and data recording / backup
• Machine maintenance
Course description
10
Course objective: Working with the hydraulic circuit diagram, knowledge
of the hydraulic machine sequence, fast fault detection and rectification
Target group: Service personnel, fitters, electricians, electronics engineers
Prerequisites: Basic knowledge of hydraulics, mechanics
Course duration: 2 days
Course fee: £ 400.00
Documents: Course folder with accompanying text and data medium
Service courses hydraulics / mechanicsSC H/M
Machine Control Code
ALLROUNDER S SELOGICA direct SCS H/M
Course content
• Explanation of the hydraulic circuit diagram
• Explanation of the most important function screens of the
SELOGICA and SELOGICA direct control system
• Pump control
• Operating principle of the injection and clamping units
• Regulating valves
• Measurement and diagnostic options
Course description
11
Course objective: Working with the electric circuit diagram, knowledge
of the electric machine sequence, fast fault detection and rectification
Target group: Service personnel, electricians, electronics engineers
Prerequisites: Knowledge of electrics and electronics
Course duration: 2 days
Course fee: £ 400.00
Documents: Course folder with accompanying text and data medium
Service courses electrics, electronics SC EL
Machine Control Code
ALLROUNDER S SELOGICA direct SCS EL
Course content
• Explanation of the electric circuit diagram
• Explanation of the most important function screens of the SELOGICA
and SELOGICA direct control system
• Machine sequence, block diagrams
• Regulating valves
• Measurement and diagnostic options
Course description
12
Course objective: Introduction to injection moulding materials and processing
Target group: Installation technicians, machine operators, production managers,
controllers, sales, designers, planners
Prerequisites: Basic knowledge of injection moulding and
injection moulding materials
Course duration: 2 days
Course fee: £ 400.00
Documents: Course folder with accompanying texts and CD
KT 1Plastics technology coursesInjection moulding materials / injection moulding process
Technology Code
Injection moulding materials /
injection moulding process KT 1
Course content
Injection moulding materials
• Structure / properties of the plastics
• Condition ranges / fine structure of plastics
• Overview of the most important plastics
Injection moulding process
• Design of the injection moulding machine
• Various injection moulding processes
• Process parameters and their influence on moulded parts
Course description
13
Seminar objectives: Familiarisation with the SELOGICA /
SELOGICA direct user interface
Target group: The seminars are aimed at all those wishing to familiarise them-
selves with the advantages of the SELOGICA / SELOGICA direct control systems
Seminar duration: 1 day (9.00 a.m. - 3 p.m.) per seminar
Tuition fee: Free of charge
Documents: Detailed seminar documentation
I SELSELOGICA information seminars
Subject Code
SELOGICA direct control system options I SEL d
Course content
• Requirements on the plastic parts
• Influence of the injection moulding machine on the moulded parts
• Design of the injection unit and clamping unit
• Function of the control hydraulics of the SELOGICA / SELOGICA direct
control system (control and operating concepts, selection and configuration
of mould, product and order-specific machine equipment, sequence
programming, machine movement parameter programming, programming
monitoring / documentation / help functions, examples of programming
steps when setting up the mould, summary of the SELOGICA /
SELOGICA direct control system)
Course description
14
Course objective: Unaided programming of the ARBURG robotic system
MULTILIFT V, SELECT and H
Target group: Programmers of MULTILIFT robotic systems
Requirements: Basic knowledge in the operation of injection moulding machines
Course duration: 3 days
Course fee: £ 600.00
Documents: Course folder and CD
RP MLCourse on robotic systemsMULTILIFT Programmer - Level 1
Robotic system Control Code
MULTILIFT V, SELECT SELOGICA ‘direct’ RP ML-V1
Course content
• Operation of the vertically (V) operating MULTILIFT V or
the horizontally (H) operating MULTILIFT H
• Programming of the MULTILIFT on ALLROUNDERs
• Various practical applications: teach-in programming,
programming of sequences, patterned part set-down and
monitoring functions
• Function description of the inputs and outputs
• Data set management
• Maintenance and inspections of the safety equipment
Course description
16
M40
A425
A425
A445
A429
A452
A452
N
S
EW
1 km
2000 ft
52.27339,-1.54449
ARBURG Ltd.Tachbrook Park Drive | Warwick CV34 6RH
Euro
pa
Way
Old Warwick RdMyton Rd
Stra
tfor
d Rd
Banburg Rd
Emscote Rd
ARBURG Ltd
Tachbrook Park Drive
Warwick CV34 6RH
Tel.: 01926 457000
Fax: 01926 457030
www.arburg.co.uk
E-Mail: [email protected]
Location map
Your signature is an acceptance to our non-liability with regard to personal
damage within our premises
To: ARBURG Ltd, Donna White +44 (0) 1926 457020
or post (in separate envelope) to: ARBURG Ltd, Tachbrook Park Drive,
Warwick, CV34 6RH, Attention: Donna White
from: (please complete this form)
O/N Position
Company:
Address:
Telephone: Fax:
Customer number:
I/We will arrive on:
and depart on:
Date Signature
Course Date Participant`s Names
Enrolment for Training Course Fax
© 2019 ARBURG GmbH + Co KG | All data and technical information have been compiled with great care. However we accept no responsibility for correctness. Individual illustrations and information may deviate from the actual delivery condition of the machine. The relevant valid operating instructions are applicable for the installation and operation of the machine.
Scan this code to visit our Media Centre: in-depth,
captivating, entertaining.
ARBURG Ltd.Tachbrook Park Drive
Warwick CV34 6RHTel.: +44 (0) 1926 457 000
6800
17_G
B_10
2019
· Su
bjec
t to
alte
ratio
ns
Pr
inte
d in
Ger
man
y