grain r stored grain management grain sense

crop-protector.com Stored Grain Management GRAIN R Grain Sense iGRAIN MOISTURE SENSOR CABLE ADVANCED DIGITAL GRAIN AND AIR MOISTURE MONITORING General description Moisture Sensor Cable Ventilation Fan Aeration fan • Avoid shrinkage through moisture monitoring • Reliable GRAIN moisture tracking • Connects to the standard iGRAIN network boxes MASTER-HUB and SUB-HUB The iGRAIN MOISTURE SENSOR CABLE is an advanced grain monitoring tool. It measures the ambient relative humidity at different points in the grain bin. The relative humidity can be calculated into grain moisture using the EMC curve (Equilibrium Moisture Concentration). Usually the top sensor is placed just under the silo roof so the head space relative humidity is monitored and applied in the iGRAIN MANAGER SOFTWARE to control the roof vent fans. Since small fluctuations in the EMC value corresponds to a very specific calibration curve, it is important that the user selects the correct grain type from the set-up menu, in the iGRAIN MANAGER SOFTWARE. In the iGRAIN MANAGER SOFTWARE the trend curves for the grain moisture can be seen. Recording of the grain moisture enables the iGRAIN system to perform the aeration so that shrinkage due to loss of moisture can be minimized. The Moisture Cables are available for different maximum tensile strength using 10,8 and 13 mm conduit cable and it can be configured to meet the customers exact requirement. ADVANTAGES Technical specifications The moisture Sensor Cables are connected to a PC with the iGRAIN DASH BOARD MANAGER Software. The communication with the sensors is by means of the iGRAIN data network via the Master-Hub(s) and Sub-Hubs. The Master-Hub collects data from the Sub-Hubs that are connected to the moisture cables. Sensor Cables: Diameter 10.8mm, tensile strength 2.000 Kg, max. 24 Meter length, max 3 sensors Diameter 13mm, tensile strength 3.000 Kg, max. 35 Meter length, max 7 sensors Each Sensor cable may have from 1 to 4 Moisture sensors There is a fixation eye at the bottom of the Sensor Cable Sensors: Grain Moisture: 8 to 24% Moisture, Head Space Humidity sensor: 2 – 99%rH Grain Moisture Sensor Grain Moisture Sensor Head-space Humidity Sensor [email protected] 6

Upload: others

Post on 15-May-2022

13 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

TRANSCRIPT

Page 1: GRAIN R Stored Grain Management Grain Sense

crop-protector.com

Stored Grain ManagementGRAIN R Grain Sense

iGRAIN MOISTURE SENSOR CABLEADVANCED DIGITAL GRAIN AND AIR MOISTURE MONITORING

General description

Moi

stur

e Se

nsor

Cab

Ventilation Fan

Aerationfan

• Avoid shrinkage through moisture monitoring• Reliable GRAIN moisture tracking• Connects to the standard iGRAIN network boxes MASTER-HUB and SUB-HUB

The iGRAIN MOISTURE SENSOR CABLE is an advanced grain monitoring tool. It measures the ambient relative humidity at different points in the grain bin. The relative humidity can be calculated into grain moisture using the EMC curve (Equilibrium Moisture Concentration).

Usually the top sensor is placed just under the silo roof so the head space relative humidity is monitored and applied in the iGRAIN MANAGER SOFTWARE to control the roof vent fans.

Since small fluctuations in the EMC value corresponds to a very specific calibration curve, it is important that the user selects the correct grain type from the set-up menu, in the iGRAIN MANAGER SOFTWARE.

In the iGRAIN MANAGER SOFTWARE the trend curves for the grain moisture can be seen.

Recording of the grain moisture enables the iGRAIN system to perform the aeration so that shrinkage due to loss of moisture can be minimized.The Moisture Cables are available for different maximum tensile strength using 10,8 and13 mm conduit cable and it can be configured to meet the customers exact requirement.

ADVANTAGES

Technical specificationsThe moisture Sensor Cables are connected to a PC with the iGRAIN DASH BOARD MANAGER Software. The communication with the sensors is by means of the iGRAIN data network via the Master-Hub(s) and Sub-Hubs. The Master-Hub collects data from the Sub-Hubs that are connected to the moisture cables.

Sensor Cables: Diameter 10.8mm, tensile strength 2.000 Kg, max. 24 Meter length, max 3 sensors Diameter 13mm, tensile strength 3.000 Kg, max. 35 Meter length, max 7 sensors Each Sensor cable may have from 1 to 4 Moisture sensors There is a fixation eye at the bottom of the Sensor Cable

Sensors: Grain Moisture: 8 to 24% Moisture, Head Space Humidity sensor: 2 – 99%rH

Grain Moisture Sensor

Head-space Humidity Sensor

[email protected]

Sealing Concrete and Steel Grain Storage - OSU Stored ...storedproducts.okstate.edu/sprec/Sealing Concrete and Steel Grain... · Sealing Concrete and Steel Grain Storage Oklahoma

Suppression of bruchids infesting stored grain legumes ...~ioïogicaï control of pest Bruchidae may provide an important management strategy against infestation of stored grain legumes,

Successful management of strongly phosphine resistant stored grain pests

Stored Grain - Purdue Extension Entomologyextension.entm.purdue.edu/publications/E-262.pdf · · 2013-10-23Stored Grain Department of Entomology ... Cowpea grain stored after harvest

MANAGING STORED GRAIN - Grain Dryer and Grain Drying … · 2019-03-21 · L1109 2007/2 Rev. 3 MANAGING STORED GRAIN Basic Principles Grain will deteriorate faster as temperature

STORED GRAIN PEST MANAGEMENTparb.agripunjab.gov.pk/system/files/Stored Grain Pest Management.p… · ¾ The adult and grub feed on the grain by making a small hole and cause 10- 15

Stored Grain Advisor Pro: Decision support system …...Journal of Stored Products Research 43 (2007) 375–383 Stored Grain Advisor Pro: Decision support system for insect management

ABIOTIC AND BIOTIC CHARACTERISTICS OF GRAIN STORED IN ... · Abiotic (nonliving) and biotic (living) variables were measured in grain bulks stored in 13 temporary grain bins on farms