grade 80 fittings - yoke lifting products and us rigging ... · pdf file1600 east mcfadden...
TRANSCRIPT
1600 East McFadden Ave. Santa Ana, CA 92705Toll Free: 1-888-260-7444 • Local: 714-545-7444
www.yokeusa.com
IL
D
IW
D
IL
IW
iw
ild
IWD
IL
ß
NEVER EXCEED PUBLISHED WORKING LOAD LIMITWARNING
Grade 80 Fittings
Extra width inside allows better works on large crane hooks.
Oblong Master Link, Code "MF". Connected to Chain with "YA" connecting link.
※ Forged Oblong Master Links. ※※ Welded Oblo ng Master Links. Design factor 4:1 proof tested and certified Tested acc. to EN 1677-1
* Forged Oblong Master Links. ★ Design factor 5:1 Proof tested and certified WLL=Working Load Limit Tested ace. to EN 1677-1
★ Proof tested and certified WLL=Working Load Limit
Oblong Master Link with Flat. Code"MFF"Connected to Chain with "YO" Omega Link.
Enlarge Oblong Master Link Assembly. Code" MFA"Designed for use with chain & wire rope.
Item No.TradeSize
Chain Size(inch)
WorkingLoad Limit Dimensions (inch) N.W.
inch 1-Leg 2-Leg Lbs* IL IW D Lbs8-003-06 ※ 3/8 7/32 -- 3,000 3.94 2.36 0.43 0.48-003-0806 ※ 1/2 1/4~5/16 7/32 4,920 4.72 2.76 0.55 0.98-003-1008 ※ 5/8 3/8 1/4~5/16 6,600 5.51 3.15 0.67 1.58-003-13 ※ 3/4 1/2 -- 10,320 5.91 3.54 0.75 2.48-003-1310 ※ 7/8 1/2 3/8 14,040 6.30 3.74 0.87 3.38-003-16 ※ 1 5/8 -- 24,360 7.48 4.33 0.98 4.98-003-1613 ※ 1-1/8 5/8 1/2 27,000 7.09 4.13 1.10 6.28-003-19 ※ 1-1/4 3/4 -- 35,160 7.87 4.72 1.18 8.48-003-2216 ※ 1-3/8 7/8 5/8 42,000 9.45 5.51 1.34 12.18-003-26 ※ 1-1/2 1 -- 47,880 9.84 5.91 1.50 15.48-003-2619 ※ 1-5/8 1 3/4 60,600 9.84 5.91 1.57 17.68-003-3222 ※ 1-3/4 1-1/4 7/8 62,520 11.81 7.09 1.77 28.08-003-3226 ※ 2 1-1/4 1 97,680 13.77 7.67 1.96 36.68-003-3632 ※ 2-1/4 -- 1-1/4 119,400 16.14 8.66 2.28 57.38-003-40 ※ 2-3/4 -- -- 178,200 19.29 10.43 2.75 100.1
Item No.TradeSize
Chain Size(inch)
WorkingLoad Limit Dimensions (inch) N.W.
inch 1-Leg 2-Leg Lbs* IL IW D Lbs8-003F-06 ※ 3/8 7/32 -- 3,000 3.94 2.36 0.43 0.48-003F-0806 ※ 1/2 1/4~5/16 7/32 4,920 4.72 2.76 0.55 0.98-003F-1008 ※ 5/8 3/8 1/4~5/16 6,600 5.51 3.15 0.67 1.58-003F-1310 ※ 7/8 1/2 3/8 14,040 6.30 3.74 0.87 3.38-003F-1613 ※ 1-1/8 5/8 1/2 27,000 7.09 4.13 1.10 5.98-003F-2216 ※ 1-3/8 3/4 5/8 42,000 9.45 5.51 1.34 12.18-003F-2619 ※ 1-5/8 1 3/4 60,600 9.84 5.91 1.57 17.4
Item No.WLL(Lbs)
ß 0-45°WLL(Lbs)ß 45° -60°
ForGrade 80
Chain (inch) Dimensions (inch) N.W.4:1 5:1 4:1 5:1 3 or 4 legs D IW IL d iw il Lbs
8-007-06 3.4 2.7 7,000 5,600 7/32 0.63 2.40 4.72 0.51 1.97 3.54 2.68-007-08 4.2 3.4 17,600 14,100 1/4~5/16 0.87 3.54 6.38 0.79 2.76 5.50 3.38-007-10 6.8 5.4 23,300 18,700 3/8 1.10 4.33 7.87 0.87 2.76 5.51 7.98-007-13 11.5 9.2 37,200 29,800 1/2 1.42 5.50 10.63 1.10 3.54 7.28 12.18-007-16 18.8 15.0 47,100 37,700 5/8 1.57 6.10 11.02 1.26 4.33 7.87 26.58-007-20 29.3 23.4 57,500 46,000 3/4 1.77 6.89 12.60 1.42 4.92 8.86 51.88-007-22 36.4 29.1 73,600 58,900 7/8 1.97 7.68 13.78 1.57 5.12 10.24 71.28-007-26 51.9 41.5 99,600 79,700 1 2.36 8.66 16.14 1.87 7.68 13.78 134.58-007-32 69.6 55.6 132,000 105,600 1-1/4 2.76 10.43 19.29 2.36 8.66 16.14 223.3
92
1600 East McFadden Ave. Santa Ana, CA 92705Toll Free: 1-888-260-7444 • Local: 714-545-7444www.yokeusa.com
A
B
K
T
A
H
L
G
D
R
W
K
NEVER EXCEED PUBLISHED WORKING LOAD LIMITWARNING
Grade 80 Fittings
Grade 80 Lifting Chain, Natural Finish. Code "Y"
Clevis Master Link. Code "YG"
D Master Link. Code "DA"
★ Design factor 4:1 proof tested and certified Tested ace. to DIN EN 1677-1
★ Design factor 4:1 proof tested and certified Tested ace. to DIN EN 1677-1
★ Design factor 5:1 Proof tested and certified Tested ace. to EN 1677-1
Item No.Working
Load LimitWire Dia A B
LengthPer drum N.W.
LbsLbs* tonnes* inch inch inch meters ft Per ft
8-009-06 2,500 1.12 7/32 0.71 0.31 500 1,804 1.78-009-07 3,500 1.5 9/32 0.83 0.36 500 1,640 2.28-009-08 4,500 2.0 5/16 0.95 0.41 350 1,148 3.18-009-10 7,100 3.15 3/8 1.18 0.51 250 820 4.88-009-13 12,000 5.3 1/2 1.54 0.67 150 492 8.28-009-16 18,100 8.0 5/8 1.89 0.82 100 328 12.58-009-20 28,300 12.5 3/4 2.36 1.02 60 197 19.68-009-22 34,200 15.0 7/8 2.60 1.13 50 164 23.88-009-26 47,700 21.2 1 3.07 1.33 30 98 33.38-009-32 72,300 31.5 1-1/4 3.78 1.64 25 82 49.6
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch A K L G T H Lbs
8-059-07 4,500 2.0 1/4~5/16 0.35 3.90 3.15 2.56 0.59 0.59 0.98-059-10 7,100 3.15 3/8 0.43 4.92 3.94 3.15 0.75 0.71 1.88-059-13 12,000 5.3 1/2 0.55 6.62 5.35 4.25 0.98 0.87 3.38-059-16 18,100 8.0 5/8 0.71 7.80 6.50 4.88 1.07 1.02 5.3
Item No.Working
Load Limit Dimensions (inch) N.W.Lbs* tonnes* A D K R Lbs
8-056-14 5,500 2.5 2.17 0.55 2.68 0.94 0.68-056-17 8,800 4.0 2.52 0.67 2.56 1.14 1.38-056-22 17,600 8.0 2.99 0.87 3.66 1.30 2.48-056-26 22,000 10.0 2.64 1.02 3.58 1.34 3.78-056-28 26,400 12.0 3.19 1.10 4.37 1.61 4.28-056-32 35,200 16.0 3.98 1.38 5.20 1.97 8.6
93
1600 East McFadden Ave. Santa Ana, CA 92705Toll Free: 1-888-260-7444 • Local: 714-545-7444
www.yokeusa.com
B
A
K
D
D
B
A
K
KD
P
T
8-PM015
NEVER EXCEED PUBLISHED WORKING LOAD LIMITWARNING
Grade 80 Fittings
Connecting Link, Code " YA "
★ Design factor 4:1 proof tested and certified Tested ace. to DIN EN 1677-1
Connecting Link, Dacormet®Surface Finish.**
★ Design factor 4:1 proof tested and certified Tested ace. to DIN EN 1677-1
Omega Link. Code"YO"
★ Design factor 4:1 proof tested and certified Tested ace. to DIN EN 1677-1
special pin and sleeve designed for more often re-use purpose.
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch K A D B Lbs
8-015-05 1,500 0.8 3/16 1.39 0.39 0.24 0.51 0.08 8-015-06 2,100 1.12 7/32 1.73 0.59 0.28 0.67 0.28-015-07 4,500 2.0 1/4~5/16 2.25 0.71 0.35 0.89 0.48-015-10 7,100 3.15 3/8 2.68 0.99 0.50 1.06 0.78-015-13 12,000 5.3 1/2 3.58 1.19 0.62 1.38 1.58-015-16 18,100 8.0 5/8 3.94 1.42 0.75 1.51 2.48-015-20 28,300 12.5 3/4 4.80 1.65 0.87 1.81 4.28-015-22 34,200 15.0 7/8 5.98 1.93 0.94 2.32 6.68-015-26 47,700 21.2 1 6.38 2.17 1.19 2.44 10.48-015-32 72,300 31.5 1-1/4 7.96 2.72 1.42 3.11 19.4
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch K A D B Lbs
8-M015-05 1,500 0.8 3/16 1.39 0.39 0.24 0.51 0.08 8-M015-06 2,100 1.12 7/32 1.73 0.59 0.28 0.67 0.28-M015-07 4,500 2.0 1/4~5/16 2.25 0.71 0.35 0.89 0.48-M015-10 7,100 3.15 3/8 2.68 0.99 0.50 1.06 0.78-M015-13 12,000 5.3 1/2 3.58 1.19 0.62 1.38 1.58-M015-16 18,100 8.0 5/8 3.94 1.42 0.75 1.51 2.48-M015-20 28,300 12.5 3/4 4.80 1.65 0.87 1.81 4.28-M015-22 34,200 15.0 7/8 5.98 1.93 0.94 2.32 6.68-M015-26 47,700 21.2 1 6.38 2.17 1.19 2.44 10.48-M015-32 72,300 31.5 1-1/4 7.96 2.72 1.42 3.11 19.4
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch K D T P Lbs
8-018-06 2,100 1.12 7/32 1.18 0.83 0.35 0.31 0.28-018-07 4,500 2.0 1/4~5/16 1.42 1.06 0.44 0.35 0.48-018-10 7,100 3.15 3/8 1.73 1.26 0.59 0.47 0.98-018-13 12,000 5.3 1/2 2.17 1.65 0.67 0.62 1.88-018-16 18,100 8.0 5/8 2.72 1.96 0.89 0.71 3.38-018-20 28,300 12.5 3/4 2.79 2.28 1.08 0.85 4.6
94
D
K
H
T
P
A
P
K
H
T
A
PP
NEVER EXCEED PUBLISHED WORKING LOAD LIMITWARNING
Copyright © 2012YOKE Industrial Corp.All Rights Reserved.
Grade 80 FittingsHow to use YOKE Self Locking Hook?
★ Design factor 4:1 proof tested and certified Tested ace. to DIN EN 1677-1
★ Design factor 4:1 proof tested and certified Tested ace. to DIN EN 1677-1
Eye Self Locking Hook. Code "YC"
Clevis Self Locking Hook. Code"YD"
Push trigger to open Hook
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W. Lbs* tonnes* inch K P A D T H Lbs
8-025-06 2,100 1.12 7/32 4.33 1.14 0.83 0.39 0.59 0.75 1.18-025-07 4,500 2.0 1/4~5/16 5.35 1.34 0.98 0.44 0.79 0.94 1.88-025-10 7,100 3.15 3/8 6.57 1.77 1.26 0.51 1.02 1.19 3.18-025-13 12,000 5.3 1/2 8.15 2.13 1.56 0.62 1.19 1.57 6.48-025-16 18,100 8.0 5/8 9.92 2.44 2.05 0.83 1.42 1.93 12.68-025-20 28,300 12.5 3/4 11.10 3.54 2.52 0.91 1.91 2.36 18.78-025-22 34,200 15.0 7/8 12.56 3.14 2.75 0.94 2.12 2.48 27.68-025-26 47,700 21.2 1 13.50 3.90 3.15 0.98 2.20 2.72 32.08-025-28 55,100 24.8 1-1/8 15.80 4.72 3.54 1.10 2.48 3.18 54.9
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch A K P T H Lbs
8-026-06 2,100 1.12 7/32 0.24 3.94 1.14 0.59 0.75 1.18-026-07 4,500 2.0 1/4~5/16 0.35 4.69 1.34 0.79 0.94 1.88-026-10 7,100 3.15 3/8 0.43 5.63 1.77 1.02 1.19 3.18-026-13 12,000 5.3 1/2 0.55 7.05 2.13 1.19 1.57 6.48-026-16 18,100 8.0 5/8 0.71 8.35 2.44 1.42 1.93 12.48-026-20 28,300 12.5 3/4 0.83 9.56 3.54 1.91 2.36 19.48-026-22 34,200 15.0 7/8 0.95 10.70 3.14 2.12 2.48 28.2
951600 East McFadden Ave. Santa Ana, CA 92705Toll Free: 1-888-260-7444 • Local: 714-545-7444www.yokeusa.com
1600 East McFadden Ave. Santa Ana, CA 92705Toll Free: 1-888-260-7444 • Local: 714-545-7444
www.yokeusa.comNEVER EXCEED PUBLISHED WORKING LOAD LIMITWARNING
Grade 80 Fittings
Swivel Self Locking Hook, with brass bushing. Code" YE "
Swivel Self Locking Hook, with ball bearing. Code "YEN"Ball bearing performs to fully swivel under load.
Shank Self Locking Hook. Code "YEA"
★ Design factor 4:1 proof tested and certified Tested ace. to DIN EN 1677-1
★ Design factor 4:1 proof tested and certified Tested ace. to DIN EN 1677-1
** d min. = the smallest shank dimension after machining. Note: After machining the shank, proof loading must be carried out.★ Design factor 4:1
WARNING INFORMATION:This hook is a positioning device and is not intended to rotate under load. For swivel hooks designed to rotate under load, see pages 92 8-027N .
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W. Lbs* tonnes* inch K P B A D T H Lbs
8-027-06 2,100 1.12 7/32 5.86 1.14 0.87 1.26 0.44 0.59 0.75 1.58-027-07 4,500 2.0 1/4~5/16 7.32 1.34 1.14 1.42 0.51 0.79 0.94 2.68-027-10 7,100 3.15 3/8 8.66 1.77 1.34 1.63 0.62 1.02 1.19 4.48-027-13 12,000 5.3 1/2 10.51 2.09 1.70 1.81 0.83 1.19 1.57 9.08-027-16 18,100 8.0 5/8 12.91 2.44 1.97 2.36 0.91 1.42 1.93 15.98-027-20 28,300 12.5 3/4 15.28 3.54 3.23 2.91 1.02 1.91 2.36 24.98-027-22 34,200 15.0 7/8 17.99 3.14 3.74 3.82 1.30 2.12 2.48 39.58-027-26 47,700 21.2 1 21.06 3.90 4.53 4.13 1.65 2.20 2.72 62.4
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W. Lbs* tonnes* inch K P B A D T H Lbs
8-027N-06 2,100 1.12 7/32 5.86 1.14 0.87 1.26 0.44 0.59 0.75 1.58-027N-07 4,500 2.0 1/4~5/16 7.32 1.34 1.14 1.42 0.51 0.79 0.94 2.68-027N-10 7,100 3.15 3/8 8.66 1.77 1.34 1.63 0.62 1.02 1.19 4.48-027N-13 12,000 5.3 1/2 10.51 2.09 1.70 1.81 0.83 1.19 1.57 9.08-027N-16 18,100 8.0 5/8 12.91 2.44 1.97 2.36 0.91 1.42 1.93 16.18-027N-20 28,300 12.5 3/4 15.28 3.54 3.23 2.91 1.02 1.91 2.36 25.18-027N-22 34,200 15.0 7/8 17.99 3.14 3.74 3.82 1.30 2.12 2.48 39.98-027N-26 47,700 21.2 1 21.06 3.90 4.53 4.13 1.65 2.20 2.72 65.0
Item No.Working
Load Limit Dimensions (inch) N.W.Lbs* tonnes* K P K1 D d min.** T H Lbs
8-024-06 2,100 1.12 3.54 1.14 1.46 0.83 0.44 0.59 0.75 1.18-024-07 4,500 2.0 4.53 1.38 1.69 1.98 0.51 0.79 0.94 2.08-024-10 7,100 3.15 5.31 1.77 1.89 1.14 0.62 1.02 1.19 3.38-024-13 12,000 5.3 6.73 2.09 2.52 1.34 0.79 1.19 1.57 6.68-024-16 18,100 8.0 8.03 2.44 2.95 1.46 0.98 1.42 1.93 12.18-024-20 28,300 12.5 8.62 3.54 3.54 1.69 1.50 1.91 2.36 19.08-024-22 34,200 15.0 9.88 3.14 4.53 2.01 1.77 2.12 2.48 26.08-024-26 47,700 21.2 10.67 3.90 5.94 2.56 1.97 2.20 2.72 37.2
96
1600 East McFadden Ave. Santa Ana, CA 92705Toll Free: 1-888-260-7444 • Local: 714-545-7444www.yokeusa.com
A
K
H
T
P P
AD
B
K
H
P
T
AD
B
K
H
T
P
NEVER EXCEED PUBLISHED WORKING LOAD LIMITWARNING
Grade 80 Fittings
★ Design factor 4:1 proof tested and certified Tested ace. to DIN EN 1677-1
★ Design factor 4:1 proof tested and certified Tested ace. to DIN EN 1677-1
★ Design factor 4:1 proof tested and certified Tested ace. to DIN EN 1677-1
Clevis Swivel Self Locking Hook, with ball bearing. Code " KP "Ball bearing performs to fully swivel under load
Eye Swivel Hook, with brass bushing. Code " YSW "
Eye Swivel Hook, with ball bearing. Code "YSWN " Ball bearing performs to fully swivel under load.
WARNING INFORMATION:This hook is a positioning device and is not intended to rotate under load. For swivel hooks designed to rotate under load, see pages 93 8-049N.
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch A K P T H Lbs
8-022-06 2,100 1.12 7/32 0.24 6.14 1.14 0.59 0.75 1.88-022-07 4,500 2.0 1/4~5/16 0.35 7.40 1.34 0.79 0.94 2.98-022-10 7,100 3.15 3/8 0.43 8.46 1.77 1.02 1.19 4.98-022-13 12,000 5.3 1/2 0.55 10.83 2.13 1.19 1.57 9.98-022-16 18,100 8.0 5/8 0.71 12.72 2.44 1.42 1.93 17.48-022-20 28,300 12.5 3/4 0.83 16.45 3.54 1.91 2.36 27.6
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W. Lbs* tonnes* inch K P B A D T H Lbs
8-049-06 2,100 1.12 7/32 5.35 0.94 0.88 1.26 0.44 0.64 0.74 1.38-049-07 4,500 2.0 1/4~5/16 6.10 1.02 1.06 1.42 0.51 0.71 0.87 1.98-049-10 7,100 3.15 3/8 7.44 1.42 1.46 1.63 0.62 0.91 1.14 3.58-049-13 12,000 5.3 1/2 9.17 1.65 1.57 1.81 0.83 1.10 1.38 7.18-049-16 18,100 8.0 5/8 11.02 1.97 1.97 2.36 0.91 1.38 1.73 11.78-049-20 28,300 12.5 3/4 14.00 2.20 3.23 2.91 1.02 1.91 2.56 20.3
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W. Lbs* tonnes* inch K P B A D T H Lbs
8-049N-06 2,100 1.12 7/32 5.35 0.94 0.88 1.26 0.44 0.64 0.74 1.38-049N-07 4,500 2.0 1/4~5/16 6.10 1.02 1.06 1.42 0.51 0.71 0.87 2.08-049N-10 7,100 3.15 3/8 7.44 1.42 1.46 1.63 0.62 0.91 1.14 3.58-049N-13 12,000 5.3 1/2 9.17 1.65 1.57 1.81 0.83 1.10 1.38 7.58-049N-16 18,100 8.0 5/8 11.02 1.97 1.97 2.36 0.91 1.38 1.73 11.78-049N-20 28,300 12.5 3/4 14.00 2.20 3.23 2.91 1.02 1.91 2.56 20.5
97
1600 East McFadden Ave. Santa Ana, CA 92705Toll Free: 1-888-260-7444 • Local: 714-545-7444
www.yokeusa.com
D
A
K
H
T
P1
D
A
K
H
T
P
D
A
K
H
T
P
NEVER EXCEED PUBLISHED WORKING LOAD LIMITWARNING
Grade 80 Fittings
to protect latch to protect latch
★ Design factor 4:1 proof tested and certified Tested ace. to DIN EN 1677-1
★ Design factor 4:1 proof tested and certified Tested ace. to DIN EN 1677-1
★ Design factor 4:1 proof tested and certified Tested ace. to DIN EN 1677-1
Eye Sling Hook, with latch. Code "YP"
Eye Sling Hook,with latch. Code "EL"
Eye Foundry Hook. Code "YN"
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch K P1 A D T H Lbs
8-044/S-06 2,100 1.12 7/32 3.15 0.94 0.79 0.35 0.63 0.79 0.78-044/S-07 4,500 2.0 1/4~5/16 3.86 1.18 0.98 0.43 0.75 0.91 1.18-044/S-10 7,100 3.15 3/8 4.76 1.42 1.26 0.59 0.91 1.22 2.08-044/S-13 12,000 5.3 1/2 5.98 1.69 1.57 0.71 1.10 1.50 4.28-044/S-16 18,100 8.0 5/8 7.20 1.85 1.97 0.87 1.29 1.85 7.18-044/S-20 28,300 12.5 3/4 8.54 1.77 2.36 1.06 1.69 1.89 12.68-044/S-22 34,200 15.0 7/8 9.45 2.75 2.01 1.26 1.97 2.44 20.18-044/S-26 47,700 21.2 1 10.63 3.15 2.60 1.34 2.36 3.15 30.08-044/S-32 72,300 31.5 1-1/4 13.86 4.49 3.50 1.57 2.56 3.39 41.2
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch K P A D T H Lbs
8-039-06 2,100 1.12 7/32 3.15 0.90 0.78 0.35 0.63 0.75 0.78-039-07 4,500 2.0 1/4~5/16 4.29 1.10 1.02 0.62 0.94 0.90 1.58-039-10 7,100 3.15 3/8 5.39 1.29 1.33 0.76 1.02 1.18 2.68-039-13 12,000 5.3 1/2 6.81 1.57 1.65 0.90 1.37 1.45 5.58-039-16 18,100 8.0 5/8 7.28 1.73 2.04 1.10 1.41 1.81 8.2
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch K P A D T H Lbs
8-047-07 4,500 2.0 1/4~5/16 4.84 2.44 0.94 0.47 0.79 1.18 1.58-047-10 7,100 3.15 3/8 5.91 2.87 1.26 0.59 0.94 1.34 2.98-047-13 12,000 5.3 1/2 7.09 3.50 1.56 0.75 1.34 1.65 5.38-047-16 18,100 8.0 5/8 8.46 3.94 1.96 0.98 1.63 1.97 8.88-047-20 28,300 12.5 3/4 9.76 4.41 2.36 1.10 1.81 2.25 20.7
98
1600 East McFadden Ave. Santa Ana, CA 92705Toll Free: 1-888-260-7444 • Local: 714-545-7444www.yokeusa.com
P1
T
H
K
A
G
KL
W
A
C
M
K
H
T
P
A
NEVER EXCEED PUBLISHED WORKING LOAD LIMITWARNING
Grade 80 Fittings
Clevis Sling Hook,with latch. Code"YM"
Clevis Shackle. Code"YR"
Clevis C Hook. Code"FE"
★ Design factor 4:1 proof tested and certified Tested ace. to DIN EN 1677-1
★ Design factor 4:1 proof tested and certified Tested ace. to DIN EN 1677-1
★ Design factor 4:1 proof tested and certified Tested ace. to DIN EN 1677-1
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch A K P1 T H Lbs
8-043/S-06 2,100 1.12 7/32 0.24 3.07 0.87 0.59 0.70 0.78-043/S-07 4,500 2.0 1/4~5/16 0.35 3.74 1.18 0.75 0.91 1.38-043/S-10 7,100 3.15 3/8 0.43 4.72 1.42 0.91 1.14 2.68-043/S-13 12,000 5.3 1/2 0.55 5.79 1.73 1.10 1.50 5.18-043/S-16 18,100 8.0 5/8 0.71 6.65 1.81 1.54 1.65 8.48-043/S-20 28,300 12.5 3/4 0.83 7.87 2.20 1.85 2.01 14.8
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch A K P T H Lbs
8-097-07 4,500 2.0 1/4~5/16 0.35 3.15 0.75 0.71 0.87 1.18-097-10 7,100 3.15 3/8 0.43 4.13 1.02 0.94 1.02 2.08-097-13 12,000 5.3 1/2 0.55 5.43 1.34 1.26 1.34 4.68-097-16 18,100 8.0 5/8 0.71 6.69 1.50 1.46 1.77 7.9
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W. Lbs* tonnes* inch A K L W G M C Lbs
8-066-07 4,500 2.0 1/4~5/16 0.35 2.32 1.38 1.30 1.34 0.63 3.11 0.98-066-10 7,100 3.15 3/8 0.43 3.07 1.89 1.46 1.57 0.79 3.66 1.88-066-13 12,000 5.3 1/2 0.55 3.86 2.52 1.93 1.73 0.87 4.65 3.18-066-16 18,100 8.0 5/8 0.71 4.41 2.72 2.36 2.13 1.10 5.55 5.5
99
1600 East McFadden Ave. Santa Ana, CA 92705Toll Free: 1-888-260-7444 • Local: 714-545-7444
www.yokeusa.com
A
K
T
C
P
E
L
D
B
NEVER EXCEED PUBLISHED WORKING LOAD LIMITWARNING
Grade 80 Fittings
Clevis Forest Hook. Code"YT"
Clevis Choker. Code"YF"
Item No.8-Tag-03Sling Tag, Aluminum.
Item No.8-Tag-04Sling Tag, Stainless
★ Design factor 4:1 proof tested and certified Tested ace. to DIN EN 1677-1
★ Design factor 4:1 proof tested and certified Tested ace. to DIN EN 1677-1
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch K P T A C Lbs
8-075-06 2,100 1.12 7/32 1.85 0.31 0.67 0.31 1.02 0.78-075-07 4,500 2.0 1/4~5/16 2.28 0.39 0.71 0.35 1.26 1.18-075-10 7,100 3.15 3/8 3.23 0.47 0.83 0.51 1.77 2.08-075-13 12,000 5.3 1/2 3.93 0.62 1.06 0.55 1.85 3.7
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch L B E D Lbs
8-091-06 3,500 1.5 7/32~1/4 3.09 0.57 0.35 0.63 1.18-091-08 4,500 2.0 5/16 3.23 0.61 0.37 0.67 1.3
100
1600 East McFadden Ave. Santa Ana, CA 92705Toll Free: 1-888-260-7444 • Local: 714-545-7444www.yokeusa.com
P
K
A
G
F
A
K
H
P
L
F
F D
E
A
B
C
NEVER EXCEED PUBLISHED WORKING LOAD LIMITWARNING
Grade 80 Fittings
Spring Locking Pin, for safety purpose.
Push to Release
Eye Grab Hook. Code"YH"
Clevis Grab Hook.Code "YK"
Clevis Clutch - Locking Type. Code"KCK"
Not for use with Omega Link Item. 8-018 No reduction of working load limit, thanks to supporting wings which prevent chain link deformation.
Not for use with Omega Link Item. 8-018 No reduction of working load limit, thanks to supporting wings which prevent chain link deformation.
★ Size 32mm supplied without flat wing.★ Design factor 4:1 proof tested and certified.
Tested ace. to DIN EN 1677-1
★ Design factor 4:1 proof tested and certified. Tested ace. to DIN EN 1677-1
★ Design factor 4:1 proof tested and certified. Tested ace. to DIN EN 1677-1
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch P A G K F Lbs
8-041-06 2,100 1.12 7/32 0.31 0.51 0.31 2.01 0.98 0.48-041-07 4,500 2.0 1/4~5/16 0.39 0.59 0.35 2.36 1.18 0.78-041-10 7,100 3.15 3/8 0.51 0.79 0.51 3.22 1.61 1.38-041-13 12,000 5.3 1/2 0.63 0.98 0.59 4.02 2.05 3.18-041-16 18,100 8.0 5/8 0.79 1.18 0.79 5.16 2.24 4.98-041-20 28,300 12.5 3/4 0.91 1.49 0.91 5.75 2.87 8.48-041-22 34,200 15.0 7/8 1.02 1.50 1.02 6.42 2.76 10.18-041-26 47,700 21.2 1 1.14 1.81 1.26 8.07 3.94 22.78-041-32 72,300 31.5 1-1/4 1.53 2.28 1.61 10.51 5.00 44.1
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch P A F K H L Lbs
8-042-06 2,100 1.12 7/32 0.31 0.28 0.98 1.61 0.63 3.11 0.48-042-07 4,500 2.0 1/4~5/16 0.39 0.35 1.18 2.17 0.98 3.66 0.78-042-10 7,100 3.15 3/8 0.51 0.47 1.61 3.03 1.38 5.04 1.88-042-13 12,000 5.3 1/2 0.63 0.59 2.09 3.82 1.65 5.98 3.58-042-16 18,100 8.0 5/8 0.79 0.67 2.22 4.47 1.77 7.66 6.28-042-20 28,300 12.5 3/4 0.91 0.91 3.86 4.88 2.13 8.54 11.0
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch A B C D E F Lbs
8-061-06 2,100 1.12 7/32 0.28 0.28 0.39 0.28 0.71 1.97 0.78-061-07 4,500 2.0 1/4~5/16 0.37 0.37 0.40 0.39 0.94 2.22 1.18-061-10 7,100 3.15 3/8 0.47 0.45 0.45 0.47 1.10 2.59 2.08-061-13 12,000 5.3 1/2 0.59 0.59 0.63 0.63 1.54 3.46 4.68-061-16 18,100 8.0 5/8 0.71 0.83 0.72 0.75 1.90 4.06 8.28-061-20 28,300 12.5 3/4 0.91 0.91 0.91 0.83 2.17 5.18 12.6
101
1600 East McFadden Ave. Santa Ana, CA 92705Toll Free: 1-888-260-7444 • Local: 714-545-7444
www.yokeusa.com
A
C
B
E
FD
G
K
A
T
F
B
C
A
LK
NEVER EXCEED PUBLISHED WORKING LOAD LIMITWARNING
Grade 80 Fittings
Clevis Clutch. Code "KC"
Eye Shortening Hook. Code"KD"
Clevis Traveling Clutch. Code "KR"
★ Design factor 4:1 proof tested and certified. Tested ace. to DIN EN 1677-1
★ Design factor 4:1 proof tested and certified. Tested ace. to DIN EN 1677-1
★ Design factor 4:1 proof tested and certified. Tested ace. to DIN EN 1677-1
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch A,B C D E F Lbs
8-060-06 2,100 1.12 7/32 0.26 0.31 0.28 0.43 1.77 0.48-060-07 4,500 2.0 1/4~5/16 0.34 0.39 0.35 0.63 2.44 1.18-060-10 7,100 3.15 3/8 0.49 0.55 0.47 0.98 3.43 2.28-060-13 12,000 5.3 1/2 0.65 0.67 0.59 1.26 4.53 4.48-060-16 18,100 8.0 5/8 0.81 0.75 0.75 1.54 5.63 7.18-060-20 28,300 12.5 3/4 0.85 0.91 0.87 1.81 5.98 10.8
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch K G A T F Lbs
8-062-06 2,100 1.12 7/32 2.13 1.50 0.79 0.39 1.38 0.48-062-07 4,500 2.0 1/4~5/16 2.64 1.93 0.98 0.47 1.73 1.18-062-10 7,100 3.15 3/8 2.95 2.36 1.26 0.55 2.24 2.08-062-13 12,000 5.3 1/2 4.17 3.15 1.57 0.75 2.87 4.28-062-16 18,100 8.0 5/8 5.16 3.82 1.97 0.87 3.46 7.78-062-20 28,300 12.5 3/4 6.30 4.49 2.36 1.06 4.21 12.8
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch K A B C L Lbs
8-064-06 2,100 1.12 7/32 2.52 0.28 1.22 0.31 3.39 0.48-064-07 4,500 2.0 1/4~5/16 2.87 0.39 1.73 0.39 4.09 0.98-064-10 7,100 3.15 3/8 3.23 0.43 2.40 0.51 4.76 1.5
102
1600 East McFadden Ave. Santa Ana, CA 92705Toll Free: 1-888-260-7444 • Local: 714-545-7444www.yokeusa.com
A
PLK
BC
HT
L
A
K
B
NEVER EXCEED PUBLISHED WORKING LOAD LIMITWARNING
Grade 80 Fittings
Clutch Sling Hook - Locking Clutch. Code"EF"
New Solution Old Fashion
★ Design factor 4:1 proof tested and certified. Tested ace. to DIN EN 1677-1
Double End Claw, with fixed pin. Code"KT"
★ Design factor 4:1 proof tested and certified. Tested ace. to DIN EN 1677-1
Patent
INNOVATION
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch A B C K H P L T Lbs
8-077-06 2,100 1.12 7/32 0.28 0.28 0.67 4.00 0.71 0.85 5.33 0.61 1.18-077-07 4,500 2.0 1/4~5/16 0.38 0.40 0.94 4.85 0.93 1.04 6.75 0.72 1.8 8-077-10 7,100 3.15 3/8 0.47 0.47 1.10 5.85 1.34 1.32 8.40 0.93 3.88-077-13 12,000 5.3 1/2 0.60 0.63 1.14 7.05 1.46 1.71 10.06 1.18 7.58-077-16 18,100 8.0 5/8 0.80 0.75 1.90 8.36 1.66 1.80 12.00 1.54 12.4
ItemNo.Working
LoadLimit
ForGrade80
Chain Dimensions(inch) N.W.Lbs* tonnes* inch A K B L Lbs
8-065-06 2,100 1.12 7/32 0.28 2.87 1.46 3.70 0.78-065-07 4,500 2.0 1/4~5/16 0.39 3.90 1.89 4.88 1.38-065-10 7,100 3.15 3/8 0.51 4.88 2.36 6.10 2.78-065-13 12,000 5.3 1/2 0.59 5.91 2.95 7.68 5.78-065-16 18,100 8.0 5/8 0.75 7.60 3.70 9.72 11.5
103
1600 East McFadden Ave. Santa Ana, CA 92705Toll Free: 1-888-260-7444 • Local: 714-545-7444
www.yokeusa.com
B
A
C
L F D
E
D
K
F
E
G
A
H
C
NEVER EXCEED PUBLISHED WORKING LOAD LIMITWARNING
Grade 80 Fittings
Shortening Clutch. Code"EX"
Shortening Clutch, with Half Link
★ Design factor 4:1 proof tested and certified. Tested ace. to DIN EN 1677-1
★ Design factor 4:1 proof tested and certified. Tested ace. to DIN EN 1677-1
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch A B C D E F Lbs
8-072-07 4,500 2.0 1/4~5/16 0.47 0.79 0.39 0.91 2.76 5.00 1.38-072-10 7,100 3.15 3/8 0.51 1.02 0.47 1.14 3.43 6.18 2.48-072-13 12,000 5.3 1/2 0.59 1.30 0.63 1.46 4.53 7.95 5.38-072-16 18,100 8.0 5/8 0.83 1.54 0.75 1.81 5.63 10.00 10.1
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch A X D B C D E F Lbs
8-078-07 4,500 2.0 1/4~5/16 0.47 0.79 0.39 0.91 2.76 0.89 0.35 5.04 1.58-078-10 7,100 3.15 3/8 0.51 1.02 0.47 1.14 3.43 1.06 0.50 6.06 2.98-078-13 12,000 5.3 1/2 0.59 1.30 0.63 1.46 4.53 1.38 0.62 7.99 6.28-078-16 18,100 8.0 5/8 0.83 1.54 0.75 1.81 5.63 1.51 0.75 9.76 11.7
104
1600 East McFadden Ave. Santa Ana, CA 92705Toll Free: 1-888-260-7444 • Local: 714-545-7444www.yokeusa.com
A
A
8-067-45LT
8-067-45RH
8-067-STR
NEVER EXCEED PUBLISHED WORKING LOAD LIMITWARNING
Grade 80 Fittings
Eye Container Hook. Code"KA"
Clevis Container Hook. Code"KB"
Clevis Container Link. with spring gate, Code"KU"
★ Design factor 4:1 proof tested and certified.
★ Design factor 4:1 proof tested and certified. Tested ace. to DIN EN 1677-1
★ Design factor 4:1 proof tested and certified. Tested ace. to DIN EN 1677-1
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch A P C T H K Lbs
8-068-13 12,000 5.3 1/2 0.59 2.17 2.05 1.10 1.73 7.48 7.8
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch A P C T H Lbs
8-069-13 12,000 5.3 1/2 0.55 5.55 2.24 2.56 4.92 4.0
Item No. DSC.Working
Load Limit Dimensions (inch) N.W.Lbs* tonnes* K E F T G H Lbs
8-067-STR Straight 28,000 12.5 7.56 2.76 1.81 0.98 2.95 1.89 8.68-067-45LT Left 45ª 28,000 12.5 7.56 2.76 1.81 0.98 2.95 1.89 8.68-067-45RH Right 45ª 28,000 12.5 7.56 2.76 1.81 0.98 2.95 1.89 8.6
105
1600 East McFadden Ave. Santa Ana, CA 92705Toll Free: 1-888-260-7444 • Local: 714-545-7444
www.yokeusa.com
A
DB
K
H
T
P
T
H
C
A
KP
L
W
D
E
S
H
P
A
NEVER EXCEED PUBLISHED WORKING LOAD LIMITWARNING
Grade 80 Fittings
Container Hook. Code "KL"
Shackle Eye Swivel Hook, with brass bushing. Code "YSWX"
Sliding Choke Hook. Code "KF"
★ Design factor 4:1 proof tested and certified. Tested ace. to DIN EN 1677-1
★ Design factor 4:1 proof tested and certified. Tested ace. to DIN EN 1677-1
★ Design factor 5 : 1
WARNING INFORMATION:This hook is a positioning device and is not intended to rotate under load.
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch A K H P I D L W Lbs
8-073-16 18,100 8.0 5/8 1.93 7.44 1.97 2.28 1.61 1.26 10.31 1.73 8.2
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch A K H P I D W Lbs
8-048-16 18,100 8.0 5/8 10.03 1.97 1.10 1.10 1.10 1.38 1.73 13.0
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch A E P S H Lbs
8-074-09/13 3,300 1.5 3/8 0.63 3.43 0.71 0.71 0.94 1.38-074-09/16 4,850 2.2 9/16 0.83 3.86 0.79 0.87 1.14 2.0
106
1600 East McFadden Ave. Santa Ana, CA 92705Toll Free: 1-888-260-7444 • Local: 714-545-7444www.yokeusa.com
A
K
K
C
T
P
K
W
E
W
K
NEVER EXCEED PUBLISHED WORKING LOAD LIMITWARNING
Grade 80 Fittings
Twist Eye Choke Hook. Code "KE"
Rapid Double End Choker. Code "KS"
Barrel Hook. Code "KK"
★ Design factor 4:1 proof tested and certified. Tested ace. to DIN EN 1677-1
★ Design factor 4:1 proof tested and certified.
★ Design factor 5:1 proof tested and certified.
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch K C A Lbs
8-063-07 4,500 2.0 1/4~5/16 3.74 0.75 1.28 0.98-063-10 7,100 3.15 3/8 4.57 0.83 1.61 1.88-063-13 12,000 5.3 1/2 5.91 1.06 1.97 4.48-063-16 18,100 8.0 5/8 7.28 1.26 2.64 6.8
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch E K W Lbs
8-071-07 3,500 1.6 1/4 1.50 5.24 1.97 2.0
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch K P W T Lbs
8-076-0.5 1,100 0.5 5/16 2.83 0.75 0.71 0.47 0.98-076-01 2,200 1.0 1/2 2.83 0.75 0.71 0.79 1.18-076-02 4,400 2.0 5/8 3.50 0.75 1.02 1.10 2.48-076-04 8,800 4.0 3/4 4.29 0.98 1.34 1.26 4.2
107
1600 East McFadden Ave. Santa Ana, CA 92705Toll Free: 1-888-260-7444 • Local: 714-545-7444
www.yokeusa.com
D
L
KM
T
P
H
NEVER EXCEED PUBLISHED WORKING LOAD LIMITWARNING
Grade 80 Fittings
Shank Sling Hook. Code "FH"
Tractor Hook. Code "FG"
**d min.: the smallest shank dimension after machining.Note: After machining the shank proof loading must be carried out.★ Design factor 4:1
★ Design factor 4:1 proof tested and certified.
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch K P D T H L d min*** M Lbs
8-045-10 7,100 3.15 3/8 8.31 1.65 1.38 1.26 1.69 1.81 M20 5.51 3.5
Item No.Working
Load Limit Dimensions (inch) N.W.Lbs* tonnes* K P B A T L Lbs
8-092-38 18,700 8.5 7.2 1.18 1.69 1.26 1.65 10.43 12.48-092-48 24,200 11 8.4 1.30 1.69 1.26 1.81 11.81 15.4
108
1600 East McFadden Ave. Santa Ana, CA 92705Toll Free: 1-888-260-7444 • Local: 714-545-7444www.yokeusa.com
A
BOL
C
W
OL
W
D
C
B
E
F
P
G
A
K
H
T
D
NEVER EXCEED PUBLISHED WORKING LOAD LIMITWARNING
Grade 80 Fittings
Eye Swivels.
Quick Connector. Code "EM"
Quick Hook. Code "FA"
★ Design factor 4:1 proof tested and certified. Tested ace. to DIN EN 1677-1
★ Design factor 5:1 proof tested and certified.
★ Design factor 4:1 proof tested and certified.
WARNING INFORMATION:This hook is a positioning device and is not intended to rotate under load.
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch A B C W OL Lbs
8-080-06 2,100 1.12 7/32 0.86 4.72 1.26 2.17 5.63 1.38-080-07 4,500 2.0 1/4~5/16 1.14 5.51 1.42 2.36 6.50 2.28-080-10 7,100 3.15 3/8 1.34 6.54 1.63 2.87 7.80 3.18-080-13 12,000 5.3 1/2 1.70 8.35 1.81 3.46 10.00 6.68-080-16 18,100 8.0 5/8 1.97 9.84 2.35 4.21 11.65 10.18-080-20 28,300 12.5 3/4 3.23 13.26 2.91 5.00 15.20 16.88-080-22 34,200 15.0 7/8 3.74 16.22 3.82 6.61 18.52 40.18-080-26 47,700 21.2 1 4.53 20.43 4.13 8.31 23.70 80.3
Item No.Working
Load Limit Dimensions (inch) N.W.Lbs* tonnes* OL B C D E F W Lbs
8-089-10 6,600 3.0 4.53 3.15 1.61 1.18 0.1 0.98 2.76 1.58-089-13 11,000 5.0 5.35 3.74 1.88 1.42 0.1 1.18 3.15 2.68-089-16 17,600 8.0 6.10 4.25 1.97 1.65 0.1 1.41 3.78 4.4
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch P G D A T H K Lbs
8-093-10 7,100 3.15 3/8 0.47 0.79 0.59 1.26 0.83 0.91 3.00 0.98-093-13 12,000 5.3 1/2 0.55 1.10 0.71 1.50 0.98 1.10 3.66 2.08-093-16 18,100 8.0 5/8 0.67 1.26 0.87 1.97 1.26 1.34 4.65 3.88-093-19 25,500 11.5 3/4 0.83 1.50 1.02 2.32 1.42 1.73 5.67 7.3
109
1600 East McFadden Ave. Santa Ana, CA 92705Toll Free: 1-888-260-7444 • Local: 714-545-7444
www.yokeusa.com
1600 East McFadden Ave. Santa Ana, CA 92705Toll Free: 1-888-260-7444 • Local: 714-545-7444www.yokeusa.com
AD
K
W
B
D
A
K
H
T
P
NEVER EXCEED PUBLISHED WORKING LOAD LIMITWARNING
Grade 80 Fittings
How to use YOKE Web Sling Connector?
Web Sling Connector.
Eye Self Locking Webbing Hook. Code "FT"
★ Design factor 4:1 proof tested and certified. Tested ace. to DIN EN 1677-1
★ Design factor 4:1 proof tested and certified. Tested ace. to DIN EN 1677-1
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch A B D K W Lbs
8-016-06 2,100 1.12 7/32 0.59 0.67 0.28 2.16 1.54 0.48-016-07 4,500 2.0 1/4~5/16 0.71 0.89 0.35 2.44 1.57 0.78-016-10 7,100 3.15 3/8 0.99 1.06 0.50 3.07 1.85 1.38-016-13 12,000 5.3 1/2 1.19 1.38 0.62 3.74 2.09 2.48-016-16 18,100 8.0 5/8 1.42 1.51 0.75 4.53 2.64 4.48-016-20 28,300 12.5 3/4 1.65 1.81 0.87 5.20 3.15 7.18-016-22 34,200 15.0 7/8 1.93 2.32 0.94 7.36 4.92 16.38-016-26 47,700 21.2 1 2.17 2.44 1.19 8.23 5.91 25.38-016-32 72,300 31.5 1-1/4 2.72 3.11 1.42 10.98 7.48 40.6
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch K P A D T F Lbs
8-029-10 7,100 3.15 3/8 6.69 1.50 1.26 0.51 1.26 1.65 5.5
111
K
T
H
W
P
AD
B
K
H
T
W
P
K
A
D
NEVER EXCEED PUBLISHED WORKING LOAD LIMITWARNING
Copyright © 2012YOKE Industrial Corp.
All Rights Reserved.
Grade 80 Fittings
Flat Webbing Choker. Code "FN"
Flat Webbing Choker. Code "FM"
Bolt Anchor. Code "DC"
Patent■No. : Germany 40144213.8 Taiwan 90301916
★ Design factor 4:1 proof tested and certified.
★ Design factor 4:1 proof tested and certified.
★ Design factor 5:1
Item No.Working
Load Limit Dimensions (inch) N.W.Lbs* tonnes* K P W T H Lbs
8-030-01 2,200 1 3.11 1.02 1.73 0.83 1.02 1.88-030-02 4,400 2 3.43 1.34 2.80 0.98 1.38 3.58-030-03 6,600 3 3.78 1.46 4.02 1.14 1.50 5.38-030-05 11,000 5 6.10 1.77 673 1.57 1.97 17.2
Item No.Working
Load Limit Dimensions (inch) N.W.Lbs* tonnes* K P B A D W T H Lbs
8-031-02 4,400 2.0 5.51 1.73 0.94 3.19 0.55 3.15 1.57 1.73 4.6
Item No.Working
Load Limit Dimensions (inch) N.W.Lbs* tonnes* K A D Lbs
8-036-05 5,500 2.5 2.32 2.17 0.55 1.58-036-06 7,050 3.2 2.95 2.56 0.55 1.58-036-07 9,260 4.2 3.35 3.15 0.63 2.78-036-10 9,260 4.2 4.29 4.13 0.63 3.18-036-12 14,100 6.4 5.31 5.20 0.79 4.98-036-15 14,100 6.4 6.77 6.30 0.79 7.1
1121600 East McFadden Ave. Santa Ana, CA 92705Toll Free: 1-888-260-7444 • Local: 714-545-7444
www.yokeusa.com
1600 East McFadden Ave. Santa Ana, CA 92705Toll Free: 1-888-260-7444 • Local: 714-545-7444www.yokeusa.com
W
K
H
T
P
NEVER EXCEED PUBLISHED WORKING LOAD LIMITWARNING
Grade 80 Fittings
Round Sling Self Locking Hook.
★ Design factor 4:1 proof tested and certified.
YOKE Roundsling Self Locking Hook is designed in a way to solve your synthetic end-fitting problems. The Roundsling Self Locking Hook presents following utmost benefits :1. The Round Shape is designed to provide great protection to your synthetic roundsling on everyloading.2. Offer complete range of hooks from 1 tonnes up to 21.2 tonnes.3. Assembly is fast and easy with only a hammer required.4. The hook with Self■Locking■function meets real
safe and safer required.5. Acquired certificate approved by BG German
company.6. Patent : Taiwan, China, France, Germany, Italy,
Japan, USA, UK, Switzerland, and Sweden.
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch K P W T H Lbs
8-028-06 2,100 1.12 7/32 5.43 1.14 1.54 0.59 0.75 1.38-028-07 4,500 2.0 1/4~5/16 6.65 1.34 1.57 0.79 0.94 2.48-028-10 7,100 3.15 3/8 7.72 1.77 1.85 1.02 1.19 4.08-028-13 12,000 5.3 1/2 9.96 2.13 2.09 1.19 1.57 7.98-028-16 18,100 8.0 5/8 12.00 2.44 2.64 1.42 1.93 15.28-028-20 28,300 12.5 3/4 12.91 3.54 3.15 1.91 2.36 23.68-028-22 34,200 15.0 7/8 16.38 3.14 4.92 2.12 2.48 39.08-028-26 47,700 21.2 1 18.07 3.90 5.91 2.20 2.72 53.1
113
D
H
KP
T
B
W
D
H
KP
T
B
W
H
T
PK
D
B
w
H
T
PK
D
B
w
T
H
w
K
D
B
P
NEVER EXCEED PUBLISHED WORKING LOAD LIMITWARNING
Copyright © 2012YOKE Industrial Corp.
All Rights Reserved.
Grade 80 Fittings
Shackle Swivel Self Hook, with brass bushing. Code "EH"
Shackle Swivel Self Hook, with ball bearing. Code " EHN "Ball bearing performs to fully under load
Shackle Swivel Hook, with brass bushing. Code " EHY "
Shackle Swivel Hook, with ball bearing. Code " EHYN "Ball bearing performs to fully swivel under load.
★ Design factor 4:1 proof tested and certified. Tested ace. to DIN EN 1677-1
★ Design factor 4:1 proof tested and certified. Tested ace. to DIN EN 1677-1
★ Design factor 4:1 proof tested and certified. Tested ace. to DIN EN 1677-1
★ Design factor 4:1 proof tested and certified. Tested ace. to DIN EN 1677-1
WARNING INFORMATION:This hook is a positioning device and is not intended to rotate under load. For swivel hooks designed to rotate under load, see pages 110 8-020N.
WARNING INFORMATION:This hook is a positioning device and is not intended to rotate under load. For swivel hooks designed to rotate under load, see pages 110 8-021N.
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W. Lbs* tonnes* inch B D K P T H W Lbs
8-020-07 4,500 2.0 9/16~5/8 1.77 0.75 8.03 1.34 0.79 0.94 0.83 3.18-020-10 7,100 3.15 3/4 2.36 0.79 9.57 1.77 1.02 1.19 1.06 6.08-020-13 12,000 5.3 7/8~1 2.95 0.87 12.09 2.13 1.19 1.57 1.34 11.5
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W. Lbs* tonnes* inch B D K P T H W Lbs
8-021-07 4,500 2.0 9/16~5/8 1.77 0.75 6.77 1.02 0.71 0.87 0.83 2.48-021-10 7,100 3.15 3/4 2.36 0.79 8.43 1.42 0.91 1.14 1.06 5.18-021-13 12,000 5.3 7/8~1 2.95 0.87 10.43 1.65 1.10 1.38 1.34 9.5
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W. Lbs* tonnes* inch B D K P T H W Lbs
8-021N-07 4,500 2.0 9/16~5/8 1.77 0.75 6.77 1.02 0.71 0.87 0.83 2.48-021N-10 7,100 3.15 3/4 2.36 0.79 8.43 1.42 0.91 1.14 1.06 5.18-021N-13 12,000 5.3 7/8~1 2.95 0.87 10.43 1.65 1.10 1.38 1.34 9.7
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W. Lbs* tonnes* inch B D K P T H W Lbs
8-020N-07 4,500 2.0 9/16~5/8 1.77 0.75 8.03 1.34 0.79 0.94 0.83 3.18-020N-10 7,100 3.15 3/4 2.36 0.79 9.57 1.77 1.02 1.19 1.06 6.28-020N-13 12,000 5.3 7/8~1 2.95 0.87 12.09 2.13 1.19 1.57 1.34 11.7
1141600 East McFadden Ave. Santa Ana, CA 92705Toll Free: 1-888-260-7444 • Local: 714-545-7444
www.yokeusa.com
1600 East McFadden Ave. Santa Ana, CA 92705Toll Free: 1-888-260-7444 • Local: 714-545-7444www.yokeusa.com NEVER EXCEED PUBLISHED WORKING LOAD LIMIT
WARNING
Grade 80 Fittings
YOKE "BSI" Insulated Swivels and Fittings
● The perfect system for universal coupling of components to chain, wire rope and synthetic slings.
● Heavy hoisting with a strong but lightweight system. All components are forged high alloy steel compatible with forged chain and fittings.
● Assembly is fast and easy with only a hammer required.
● Individual swivels & components are 100% proof load tested to a minimum of 2.5 times the working load limit.
● All "BSI" Swivels are individually tested during manufacturing to assure insulating properties. A insulated test certif icate is packaged with each unit shipped.
● YOKE "BSI" Insulated Swivels are designed with ball bearing which performs to fully swivel under Load.
● Acquired certificate approved by BG German company.
115
1600 East McFadden Ave. Santa Ana, CA 92705Toll Free: 1-888-260-7444 • Local: 714-545-7444
www.yokeusa.com
K
H
T
NEVER EXCEED PUBLISHED WORKING LOAD LIMITWARNING
Grade 80 Fittings
Coupling Self Locking Hook. Code "YL"
YOKE's innovative, fine design with " Coupling Pin " system hook is able to solve any of your problems in Chain, Wire Rope and Synthetic Slings. The hook :1. Create safer lifting with the use of " Self Locking " system.2. Assembly is fast and easy with only a hammer required.3. Acquired certificate approved by BG German company.4. Patent :Taiwan, China, France, Germany, Italy, Japan,USA, UK,
Switzerland, and Sweden.
★ Design factor 4:1 proof tested and certified. Tested ace. to DIN EN 1677-1
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch K P T H Lbs
8-023-06 2,100 1.12 7/32 4.12 1.14 0.59 0.75 1.18-023-07 4,500 2.0 1/4~5/16 5.35 1.34 0.79 0.94 1.88-023-10 7,100 3.15 3/8 6.06 1.77 1.02 1.19 3.18-023-13 12,000 5.3 1/2 7.95 2.13 1.19 1.57 6.48-023-16 18,100 8.0 5/8 9.53 2.44 1.42 1.93 11.98-023-20 28,300 12.5 3/4 10.12 3.54 1.91 2.36 17.98-023-22 34,200 15.0 7/8 11.97 3.15 2.12 2.48 24.78-023-26 47,700 21.2 1 12.95 3.90 2.20 2.72 32.2
116
WT
H
K
A
L
D
WT
H
LK
NEVER EXCEED PUBLISHED WORKING LOAD LIMITWARNING
Copyright © 2012YOKE Industrial Corp.All Rights Reserved.
Grade 80 Fittings
Insulated Blank Swivels. with ball bearing, Code " BSI "Individually tested to resist 1500 Volts insulated with Test Certifi cate.Design for protection of overhead crane during welding operations on suspended loads.
Coupling Master Link. Code "EC"
Closed Coupling Master Link. Code "ECO"
★ Design factor 4:1 proof tested and certified. Tested ace. to DIN EN 1677-1
★ Design factor 4:1 proof tested and certified. Tested ace. to DIN EN 1677-1
★ Design factor 4:1 proof tested and certified. Tested ace. to DIN EN 1677-1
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch D L Lbs
8-088-07 4,500 2.0 1/4~5/16 1.97 2.95 1.18-088-10 7,100 3.15 3/8 2.44 3.70 2.48-088-13 12,000 5.3 1/2 3.03 4.84 5.18-088-16 18,100 8.0 5/8 3.70 5.63 9.38-088-20 28,300 12.5 3/4 4.29 6.46 14.1
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch K W T H A Lbs
8-051-07 4,500 2.0 1/4~5/16 3.94 1.97 0.59 0.59 0.59 0.78-051-10 7,100 3.15 3/8 5.00 2.56 0.75 0.75 0.79 1.58-051-13 12,000 5.3 1/2 5.71 2.83 0.93 0.87 0.98 2.28-051-16 18,100 8.0 5/8 6.85 3.15 0.98 1.02 1.18 3.58-051-20 28,300 12.5 3/4 7.95 4.09 1.22 1.42 1.42 6.6
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch K W T H L Lbs
8-052-07 4,500 2.0 1/4~5/16 3.94 1.97 0.59 0.59 3.07 0.78-052-10 7,100 3.15 3/8 5.00 2.56 0.75 0.75 3.98 1.58-052-13 12,000 5.3 1/2 5.71 2.83 0.91 0.87 4.45 2.48-052-16 18,100 8.0 5/8 6.85 3.15 0.98 1.02 5.39 3.88-052-20 28,300 12.5 3/4 7.95 4.09 1.22 1.42 6.50 6.6
1171600 East McFadden Ave. Santa Ana, CA 92705Toll Free: 1-888-260-7444 • Local: 714-545-7444www.yokeusa.com
K
H
T
P
L1
D
L2
W
PP
NEVER EXCEED PUBLISHED WORKING LOAD LIMITWARNING
Copyright © 2012YOKE Industrial Corp.
All Rights Reserved.
Grade 80 Fittings
Shank Coupling. Code "EA"
Coupling Sling Hook. Code "EB"
Round Sling Coupling. Code "YW"
** d min.: the smallest shank dimension after machining. Note: After machining the shank, proof loading must be carried out.
★ Design factor 4:1 proof tested and certified. Tested ace. to DIN EN 1677-1
★ Design factor 4:1 proof tested and certified.
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch D d min.** L1 L2 Lbs
8-050-07 4,500 2.0 1/4~5/16 1.18 0.51 2.72 0.91 1.18-050-10 7,100 3.15 3/8 1.38 0.63 2.76 1.26 1.58-050-13 12,000 5.3 1/2 1.65 0.78 4.13 1.54 3.58-050-16 18,100 8.0 5/8 1.97 0.98 4.72 1.81 5.78-050-20 28,300 12.5 3/4 2.95 1.18 3.54 2.32 12.4
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch K P T H Lbs
8-055-07 4,500 2.0 1/4~5/16 3.66 1.18 0.75 0.91 0.98-055-10 7,100 3.15 3/8 4.53 1.42 0.91 1.22 2.08-055-13 12,000 5.3 1/2 5.55 1.65 1.10 1.42 4.08-055-16 18,100 8.0 5/8 6.54 1.85 1.26 1.77 6.68-055-20 28,300 12.5 3/4 7.52 2.05 1.69 1.89 10.4
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch K W A B Lbs
8-053-06 2,100 1.12 7/32 1.30 1.54 0.59 0.87 0.48-053-07 4,500 2.0 1/4~5/16 1.30 1.57 0.71 0.94 0.48-053-10 7,100 3.15 3/8 1.65 1.85 0.98 1.14 0.98-053-13 12,000 5.3 1/2 2.01 2.09 1.18 1.38 1.58-053-16 18,100 8.0 5/8 2.48 2.64 1.42 1.73 2.98-053-20 28,300 12.5 3/4 2.87 3.15 1.65 2.05 4.68-053-22 34,200 15.0 7/8 4.37 4.92 1.97 2.83 12.68-053-26 47,700 21.2 1 5.08 5.91 2.17 3.39 20.18-053-32 72,300 31.5 1-1/4 6.50 7.48 2.72 3.35 29.5
1181600 East McFadden Ave. Santa Ana, CA 92705Toll Free: 1-888-260-7444 • Local: 714-545-7444
www.yokeusa.com
D
K L
A
NEVER EXCEED PUBLISHED WORKING LOAD LIMITWARNING
Copyright © 2012YOKE Industrial Corp.All Rights Reserved.
Grade 80 Fittings
Half Coupling Link, with Coupling Pin and Sleeve Locking. Code "BST"
★ Design factor 4:1 proof tested and certified. Tested ace. to DIN EN 1677-1
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch K A D L Lbs
8-054-06 2,100 1.12 7/32 0.67 0.59 0.28 0.87 0.28-054-07 4,500 2.0 1/4~5/16 0.89 0.71 0.35 1.10 0.28-054-10 7,100 3.15 3/8 1.06 0.98 0.50 1.30 0.48-054-13 12,000 5.3 1/2 1.38 1.18 0.62 1.77 0.98-054-16 18,100 8.0 5/8 1.51 1.42 0.75 1.97 1.38-054-20 28,300 12.5 3/4 1.81 1.65 0.87 2.36 2.48-054-22 34,200 15.0 7/8 2.32 1.93 0.94 3.00 3.88-054-26 47,700 21.2 1 2.44 2.19 1.19 3.20 6.08-054-32 72,300 31.5 1-1/4 3.11 2.72 1.42 4.00 11.0
1191600 East McFadden Ave. Santa Ana, CA 92705Toll Free: 1-888-260-7444 • Local: 714-545-7444www.yokeusa.com
1600 East McFadden Ave. Santa Ana, CA 92705Toll Free: 1-888-260-7444 • Local: 714-545-7444
www.yokeusa.com
D
L1
L
H
T
L1
D
L
HT
AD
L
H
T
NEVER EXCEED PUBLISHED WORKING LOAD LIMITWARNING
Grade 80 Fittings
Insulated Swivels, with Shank & Coupling Sling Hook.
Insulated Swivels, with Shank & Coupling Self Locking Hook.
Insulated Swivels, with Half Link & Coupling Self Locking Hook.
★ Design factor 4:1 proof tested and certified
★ Design factor 4:1 proof tested and certified
★ Design factor 4:1 proof tested and certified Tested acc. to EN 1677-1
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch K T H D L1 Lbs
8-132-07 4,500 2.0 1/4~5/16 10.47 0.75 0.91 1.18 2.72 4.08-132-10 7,100 3.15 3/8 12.20 0.91 1.22 1.38 2.76 6.48-132-13 12,000 5.3 1/2 16.10 1.10 1.42 1.65 4.13 12.88-132-16 18,100 8.0 5/8 18.66 1.26 1.77 1.97 4.72 22.78-132-20 28,300 12.5 3/4 19.76 1.69 1.89 2.95 3.54 37.7
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch L T H D L1 Lbs
8-121-07 4,500 2.0 1/4~5/16 12.20 0.79 0.94 1.16 2.72 5.18-121-10 7,100 3.15 3/8 13.78 1.02 1.19 1.38 2.76 7.38-121-13 12,000 5.3 1/2 18.50 1.19 1.57 1.65 4.13 15.48-121-16 18,100 8.0 5/8 21.69 1.42 1.93 1.97 4.72 29.18-121-20 28,300 12.5 3/4 22.36 1.91 2.44 2.95 3.54 46.3
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch L T H A D Lbs
8-122-07 4,500 2.0 1/4~5/16 9.41 0.79 0.94 0.71 0.35 4.28-122-10 7,100 3.15 3/8 11.10 1.02 1.19 0.99 0.50 6.28-122-13 12,000 5.3 1/2 14.61 1.19 1.57 1.19 0.62 13.78-122-16 18,100 8.0 5/8 17.13 1.42 1.93 1.42 0.75 24.98-122-20 28,300 12.5 3/4 18.98 1.91 2.44 1.65 0.87 37.9
120
1600 East McFadden Ave. Santa Ana, CA 92705Toll Free: 1-888-260-7444 • Local: 714-545-7444www.yokeusa.com
L
AD
L
W
HT
t
Wt
L
H
T
NEVER EXCEED PUBLISHED WORKING LOAD LIMITWARNING
Grade 80 Fittings
Insulated Swivels, with 2 Half Links.
Insulated Swivels, with Open Master Link & Coupling Self Locking Hook.
Insulated Swivels, with Open Master Link & Sling Hook.
★ Design factor 4:1 proof tested and certified Tested acc. to EN 1677-1
★ Design factor 4:1 proof tested and certified Tested acc. to EN 1677-1
★ Design factor 4:1 proof tested and certified Tested acc. to EN 1677-1
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch L T H W t Lbs
8-125-07 4,500 2.0 1/4~5/16 10.51 0.75 0.91 1.97 0.59 3.58-125-10 7,100 3.15 3/8 13.19 0.91 1.22 2.56 0.75 6.28-125-13 12,000 5.3 1/2 16.14 1.10 1.42 2.83 0.91 11.98-125-16 18,100 8.0 5/8 19.06 1.26 1.77 3.15 0.98 20.38-125-20 28,300 12.5 3/4 21.97 1.69 1.89 4.09 1.22 33.1
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch L T H W t Lbs
8-124-07 4,500 2.0 1/4~5/16 12.20 0.79 0.94 1.97 0.59 4.68-124-10 7,100 3.15 3/8 14.72 1.02 1.19 2.56 0.75 7.38-124-13 12,000 5.3 1/2 18.54 1.19 1.57 2.83 0.91 14.68-124-16 18,100 8.0 5/8 22.05 1.42 1.93 3.15 0.98 25.68-124-20 28,300 12.5 3/4 24.57 1.91 2.44 4.09 1.22 41.7
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch L A D Lbs
8-123-07 4,500 2.0 1/4~5/16 5.16 0.71 0.35 1.58-123-10 7,100 3.15 3/8 6.38 0.99 0.50 3.38-123-13 12,000 5.3 1/2 8.43 1.19 0.62 7.38-123-16 18,100 8.0 5/8 9.57 1.42 0.75 12.88-123-20 28,300 12.5 3/4 11.22 1.65 0.87 20.3
121
wt
L
DA
W
D
P K
D
K
H
WT
NEVER EXCEED PUBLISHED WORKING LOAD LIMITWARNING
Copyright © 2012YOKE Industrial Corp.
All Rights Reserved.
Grade 80 Fittings
Insulated Swivels, with Open Master Link & Half Link.
Insulated Swivels, with Half Link & Web Sling Connector.
Open Master Link with Half Link.
★ Design factor 4:1 proof tested and certified Tested acc. to EN 1677-1
★ Design factor 4:1 proof tested and certified
★ Design factor 4:1 proof tested and certified Tested acc. to EN 1677-1
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch L A D W t Lbs
8-126-07 4,500 2.0 1/4~5/16 7.95 0.71 0.35 1.97 0.59 2.98-126-10 7,100 3.15 3/8 10.04 0.98 0.50 2.56 0.75 4.48-126-13 12,000 5.3 1/2 12.32 1.18 0.62 2.83 0.91 9.08-126-16 18,100 8.0 5/8 14.49 1.42 0.75 3.15 0.98 15.28-126-20 28,300 12.5 3/4 16.81 1.65 0.87 4.09 1.22 24.5
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch K W T H D Lbs
8-128-07 4,500 2.0 1/4~5/16 4.76 1.97 0.59 0.59 0.35 0.98-128-10 7,100 3.15 3/8 5.87 2.56 0.75 0.75 0.50 1.88-128-13 12,000 5.3 1/2 7.36 2.83 0.91 0.87 0.62 3.38-128-16 18,100 8.0 5/8 8.50 3.15 0.98 1.02 0.75 5.38-128-20 28,300 12.5 3/4 9.92 4.09 1.22 1.42 0.87 8.6
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch D K P W Lbs
8-130-07 4,500 2.0 1/4~5/16 0.35 5.35 2.99 1.57 1.88-130-10 7,100 3.15 3/8 0.50 6.69 3.70 1.85 4.08-130-13 12,000 5.3 1/2 0.62 8.62 4.84 2.09 7.98-130-16 18,100 8.0 5/8 0.75 10.08 5.59 2.64 14.38-130-20 28,300 12.5 3/4 0.87 11.61 6.46 3.15 22.3
1221600 East McFadden Ave. Santa Ana, CA 92705Toll Free: 1-888-260-7444 • Local: 714-545-7444
www.yokeusa.com
WT
H
K
D
D
K
H
T
P
W
t
K
H
T
P
NEVER EXCEED PUBLISHED WORKING LOAD LIMITWARNING
Copyright © 2012YOKE Industrial Corp.All Rights Reserved.
Grade 80 Fittings
Closed Master Link with Half Link.
Sling Hook with Half Link.
Coupling Self Locking Hook with Open Master Link.
★ Design factor 4:1 proof tested and certified Tested acc. to EN 1677-1
★ Design factor 4:1 proof tested and certified Tested acc. to EN 1677-1
★ Design factor 4:1 proof tested and certified Tested acc. to EN 1677-1
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch K W T H D Lbs
8-129-07 4,500 2.0 1/4~5/16 4.76 1.97 0.59 0.59 0.35 0.98-129-10 7,100 3.15 3/8 5.86 2.56 0.75 0.75 0.50 2.08-129-13 12,000 5.3 1/2 7.36 2.83 0.91 0.87 0.62 3.38-129-16 18,100 8.0 5/8 8.50 3.15 0.98 1.02 0.75 5.38-129-20 28,300 12.5 3/4 9.92 4.09 1.22 1.42 0.87 8.6
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch K P T H D Lbs
8-131-07 4,500 2.0 1/4~5/16 4.84 1.18 0.75 0.91 0.35 1.38-131-10 7,100 3.15 3/8 5.87 1.42 0.91 1.22 0.50 2.48-131-13 12,000 5.3 1/2 7.36 1.65 1.10 1.42 0.62 4.98-131-16 18,100 8.0 5/8 8.50 1.85 1.26 1.77 0.75 9.98-131-20 28,300 12.5 3/4 9.92 2.05 1.69 1.89 0.87 15.7
Item No.Working
Load Limit
ForGrade 80
Chain Dimensions (inch) N.W.Lbs* tonnes* inch K T H W t Lbs
8-127-07 4,500 2.0 1/4~5/16 8.98 0.79 0.94 1.97 0.59 2.78-127-10 7,100 3.15 3/8 10.55 1.02 1.19 2.56 0.75 4.68-127-13 12,000 5.3 1/2 13.50 1.19 1.57 2.83 0.91 8.68-127-16 18,100 8.0 5/8 16.06 1.42 1.93 3.15 0.98 16.58-127-20 28,300 12.5 3/4 17.64 1.91 2.44 4.09 1.22 25.6
1231600 East McFadden Ave. Santa Ana, CA 92705Toll Free: 1-888-260-7444 • Local: 714-545-7444www.yokeusa.com
NEVER EXCEED PUBLISHED WORKING LOAD LIMITWARNING
Copyright © 2012YOKE Industrial Corp.
All Rights Reserved.
Grade 80 Fittings
124
A
Tap Size
K
H
D
W
J
B
A B D H J K W8-9400-05 No.10 — 32UNF 5 11 8 14 5 26 9 0.018-9400-06 1/ 4 — 28UNF 7 16 11 19 6 32 12 0.038-9400-08 5/16 — 24UNF 9 19 13 21 8 37 15 0.058-9400-10 3/ 8 — 24UNF 11 22 16 22 10 41 18 0.088-9400-11 7/16 — 20UNF 13 26 18 25 11 48 21 0.128-9400-13 1/ 2 — 20UNF 14 29 21 28 13 48 24 0.168-9400-16 5/ 8 — 18UNF 17 35 27 31 16 95 30 0.39
A B D H J K W8-9400-05 No.10 — 32UNF 0.20 0.45 0.32 0.57 0.19 1.03 0.37 0.028-9400-06 1/ 4 — 28UNF 0.29 0.63 0.42 0.75 0.25 1.25 0.19 0.078-9400-08 5/16 — 24UNF 0.35 0.76 0.50 0.81 0.31 1.44 0.60 0.118-9400-10 3/ 8 — 24UNF 0.44 0.88 0.63 0.87 0.37 1.63 0.69 0.188-9400-11 7/16 — 20UNF 0.50 1.01 0.72 0.99 0.44 1.89 .081 0.268-9400-13 1/ 2 — 20UNF 0.56 1.13 0.81 1.11 0.50 1.89 0.94 0.358-9400-16 5/ 8 — 18UNF 0.69 1.38 1.06 1.20 0.63 3.73 1.19 0.86
Yoke End (clevis end),Threaded
● Forged, low carbon steel.
● Adjustable yoke wnds (also) called "clevis ends") are typically assembled to the end of a rod, pope, tube or cable linkage and are then attached via a clevis pin to a mounting point.
ITEM No. Tap Size Dimensions (inch) N.W.Lbs
ITEM No. Tap Size Dimensions (mm) N.W.Kg
1600 East McFadden Ave. Santa Ana, CA 92705Toll Free: 1-888-260-7444 • Local: 714-545-7444
www.yokeusa.com