grab kits - ab sealsabseals.com.au/wp-content/uploads/2015/07/ab-seals-grab-kits-ver...220 nitrile...

Ver 15.06.25 1

AB SEALS PTY. LTD. ABN 14 602 544 632

SEALS YOU CAN RELY ON

GRAB KITS O-RINGS

BONDED WASHERS, FLANGE SEALS

FITTINGS SEALS

O-RING TOOLS, LUBRICANTS

EFFECTIVE 1ST JANUARY 2015

3 Welch St

Underwood QLD 4119

Ph 07 3341 1200

Fax 07 3341 9399

Email [email protected]

1/1880 Hume Hwy

Campbellfield VIC 3061

Ph 03 9357 0451

Fax 03 9357 5876

Email [email protected]

Ver 15.06.25 2

We are proud to announce the release of a new range of Maxi O-Ring kits, possible the most comprehensive

kits available in the Australian marketplace. Each consists of 5 compartmented assortment boxes contained in a

rugged carry case. These are a must for any service van or as a workshop stock assortment.

Ver 15.06.25 3

ORK-MAXI FITTING $ 775.10 2

965 Assorted O-Rings (Nitrile 90 Duro), Flaretites, D-Rings, Bonded Washers, Retainers to suit UNO, SAE & Cat Flanges, BSP, ORFS, JIC fittings

UNO O-RINGS NITRILE 90 DURO

TO SUIT QTY TO SUIT QTY

0.437" -07 20 1.062" -17 20

0.562" -09 20 1.312" -21 5

0.750" -12 20 1.625" -26 5

0.875" -14 20 1.875" -30 5

SAE FLANGE O-RINGS NITRILE 90 DURO

0.500" -08 20 2.000" -32 10

0.625" -10 20 2.500" -40 10

0.750" -12 20 3.000" -48 2

1.000" -16 20 3.500" -56 2

1.250" -20 20 4.000" -64 2

1.500" -24 20 5.000" -80 2

BSP O-RINGS NITRILE 90 DURO

0.125" -02 20 1.000" -16 20

0.250" -04 20 1.250" -20 20

0.375" -06 20 1.500" -24 20

0.500" -08 20 2.000" -32 5

0.750" -12 20

ORFS O-RINGS NITRILE 90 DURO

0.562" -09 20 1.187" -19 20

0.687" -11 20 1.437" -23 20

0.812" -13 20 1.687" -27 20

1.000" -16 20 2.000" -32 20

JIC FLARETITE SEALS

0.437" -07 5 1.062" -17 5

0.562" -09 5 1.312" -21 5

0.750" -12 5 1.625" -26 5

0.875" -14 5

D-RINGS TO SUIT CAT FLANGES

0.750" 5 1.500" 3

1.000" 5 1.750" 2

1.250" 5 2.000" 2

BSP BONDED WASHERS

0.125" -02 10 0.750" -12 10

0.250" -04 10 0.875" -14 10

0.375" -06 10 1.000" -16 10

0.500" -08 10 1.250" -20 5

0.625" -10 10 1.500" -24 5

BSP RETAINING RINGS

0.125" -02 10 0.750" -12 10

0.250" -04 10 1.000" -16 10

0.375" -06 10 1.250" -20 5

0.500" -08 10 1.500" -24 5

Ver 15.06.25 4

ORK-MAXI IMP N7 $ 398.28 2

1195 Imperial British Standard Nitrile 70 Duro O-Rings

220 Nitrile 90 Duro O-Rings to suit SAE-J518c Flanges and UNO fittings

ORK-MAXI IMP N9 $ 423.33 2

1195 Imperial British Standard Nitrile 90 Duro O-Rings

220 Nitrile 90 Duro O-Rings to suit SAE-J518c Flanges and UNO fittings

Contents of both ORK-MAXI IMP kits are listed below as arranged in kit.

We will also offer these kits in Viton 75 & 90 Duro, Neoprene 70 Duro, EPDM 75 Duro, Silicone 70 Duro and

Nitrile 90 Duro Contoured Backups on request.

Empty boxes and Cases are available as a set (ORK-MAXI BOX) @ $100.00 per set.

UNO / BOSS O-RINGS

903 25 908 25

904 25 910 25

905 25 912 15

906 25 916 10

SAE FLANGE O-RINGS

BS210 10 BS222 5

BS214 10 BS225 5

BS219 10 BS228 5

1/16" CROSS SECTION

BS006-018 25 BS022-028 15

BS019-021 20 BS029-030 10

3/32 CROSS SECTION

BS109-118 25 BS131 10

BS119-120 20 BS133 10

BS121-127 15 BS135 5

BS128 10

1/8" CROSS SECTION

BS210-214 20 BS228 10

BS215-222 15 BS232 10

BS223-224 10 BS236 10

BS226 10

Ver 15.06.25 5

ORK-MAXI MET N7 $ 658.23 2

Contains

1350 European Standard Metric Nitrile 70 Duro O-Rings sorted by cross section

Contents of ORK-MAXI MET listed below as arranged in kit

1.00MM CROSS SECTION

ID (MM) QTY ID (MM) QTY ID (MM) QTY

10.00 10 16.00 10 23.00 10

12.00 10 18.00 10 24.00 10

14.00 10 20.00 10


21.00 10 24.00 10 28.00 10

22.00 10 26.00 10 30.00 10


3.00 25 14.00 25 27.00 15

4.00 25 16.00 25 28.00 15

5.00 25 17.00 25 30.00 15

6.00 25 19.00 25 32.00 15

8.00 25 20.00 20 33.00 15

10.00 25 22.00 20 35.00 15

11.00 25 24.00 20 38.00 10

13.00 25 25.00 15 41.00 10


8.00 25 21.00 25 33.00 15

10.00 25 22.00 25 35.00 15

11.00 25 24.00 20 36.00 15

13.00 25 25.00 20 38.00 10

14.00 25 27.00 15 40.00 10

16.00 25 28.00 15 43.00 10

18.00 25 30.00 15 46.00 10

19.00 25 32.00 15 49.00 10


19.00 20 30.00 15 41.00 10

21.00 20 32.00 15 44.00 10

22.00 20 33.00 15 50.00 10

24.00 20 35.00 15 57.00 10

25.00 20 36.00 15 70.00 10

27.00 15 38.00 15 82.00 10

28.00 15

Ver 15.06.25 6

AB SEALS O-RING KITS These kits are assembled in house by AB Seals and are available in 20 compartment clear boxes 355mm x

275mm x 55mm. They can be provided with customized color lid inserts showing you logo and contact details.

ORK-ORFS/UNO/SAE $ 157.50 2

Can be Supplied Marked with J.I.Case, Caterpillar or John Deere equivalent numbers

Contains

20 each Nitrile 90 Duro O-Rings for ORFS -09 to -27

20 each Nitrile 90 Duro O-Rings for SAE-J518c-12 to -20 Code 61 & 62 Flanges

20 each Nitrile 90 Duro O-Rings for UNO -07 to -21

10 each Nitrile 90 Duro O-Rings for UNO -26 to -30

ORK-ORFS/UNO/SAE V9 $ 986.65 2

Can be Supplied Marked with J.I.Case, Caterpillar or John Deere equivalent numbers

Contains

20 each Viton 90 Duro O-Rings for ORFS -09 to -27

20 each Viton 90 Duro O-Rings for SAE-J518c-12 to -20 Code 61 & 62 Flanges

20 each Viton 90 Duro O-Rings for UNO -07 to -21

10 each Viton 90 Duro O-Rings for UNO -26 to -30

ORK-BSP FITTING $ 198.79 2

Contains

20 each Nitrile 90 Duro O-Rings for BSP-02 to -32

5 each Bonded Washers for BSP-02 to -16

4 each metal Retainer Rings (used with O-Rings) for BSP-04 to -16

ORK-BWBSP $ 251.06 2

Contains



ORK-BWM $ 301.50 2

Contains

10 each Bonded Washers for M5 to M30

5 each Bonded Washers for M33 to M48

ORK-1/8 N7 $ 178.87 2

Contains

Total of 300 British Standard Imperial Nitrile 70 Duro O-Rings

BS209 to BS228

ORK-1/8 N9 $ 226.57 2

Contains


BS209 to BS228

Ver 15.06.25 7

ORK-1/8 BU $ 329.30 2

Contains

Total of 300 British Standard Imperial Nitrile Contoured Backups

BS209 to BS228

ORK-1/8 E7 $ 558.43 2

Contains

Total of 300 British Standard Imperial EPDM 75 Duro O-Rings

BS209 to BS228

ORK-1/8 V7 $ 1356.02 2

Contains

Total of 300 British Standard Imperial Viton 75 Duro O-Rings

BS209 to BS228

ORK-1/8 S7 $ 752.50 2

Contains

Total of 300 British Standard Imperial Silicone 70 Duro O-Rings

BS209 to BS228

CATERPILLAR EQUIVALENT O-RING KITS O-Ring kits are supplied in sturdy briefcase type boxes, with the smaller sizes contained in sturdy Ziploc bags.

D-Ring kits are supplied in compartmented boxes. Caterpillar numbers are listed as a reference only, all parts

are aftermarket.

ORK-4C4782 $ 250.43 2

Contains

570 Nitrile O-Rings in the 32 most popular Caterpillar sizes, covering fittings, valves and pumps

ORK-4C8253 $ 457.11 2

Contains

148 yellow Silicone O-Rings in 32 popular Caterpillar sizes, all listed by Caterpillar equivalent part number

ORK-4C4784 $ 250.43 2

Contains

10 each 1P3700 to 1P3707 ( to 2 1/8) D-Rings

5 each 1P3708 to 1P3709 (2 to 2 ) D-Rings

Ver 15.06.25 8

At AB Seals we are happy to design and assemble custom grab kits from our huge range of stock lines. These

can be labeled with your own part numbers for each item and supplied with a full color laminated lid inserts.

These can also bear your company logos and contact details.

Some of our existing customized kits include special material O-Ring kits, washer assortments, complete

machinery spare part and service kits. The only limitation is if the parts will fit!

Our standard container is 20 compartments and measures 355mm x 275mm x 55mm, but many others are

available at short lead times.

Any standard Nitrile O-Ring kit can also be converted to the corresponding backup kit or

alternative material kit providing all components are available

Ver 15.06.25 9

These sets of 5 o-ring kits represent the best value for money.

5 complete grab kits for the same price as one genuine kit.

No compromises made on material quality.

We buy in bulk to pass the savings onto you.

ORK-OK2SETN7 SET OF 5 O-RING GRAB KITS NITRILE 70 DURO

CONTAINS THE FOLLOWING KITS:

1/16 CROSS SECTION IMPERIAL (OK22N7 @ $ 41.60 CODE 2)


GENERAL IMPERIAL ASSORTMENT (OK21N7 @ $ 41.60 CODE 2)

GERMAN STANDARD METRIC (OK25N7 @ $ 41.60 CODE 2)

JAPANESE STANDARD JIS METRIC (OK24N7 @ $ 41.60 CODE 2)

ONLY $125.00 PER SET CODE 4

ORK-OK2SETN9 SET OF 5 O-RING GRAB KITS NITRILE 90 DURO

CONTAINS THE FOLLOWING KITS:



GENERAL IMPERIAL ASSORTMENT (OK23N9 @ $ 54.30 CODE 2)

GERMAN STANDARD METRIC (OK24N9 @ $ 54.30 CODE 2)

JAPANESE STANDARD JIS METRIC (OK25N9 @ $ 54.30 CODE 2)

ONLY $135.00 PER SET CODE 4

Ver 15.06.25 10

GENERIC O-RING KITS

ORK-IMP N7 $ 71.00 2

Contains


BS006 to 012 (20 each)

BS110 to 116 (13 each)

BS210 to 222 (10 each)

BS325 to 327 (7 each)

ORK-IMP V7 $ 376.54 2

Contains

Total of 382 British Standard Imperial Viton 75 Duro O-Rings

Sizes as per ORK-IMP N7

ORK-IMP C7 $ 296.28 2

Contains

Total of 382 British Standard Imperial Neoprene 70 Duro O-Rings


ORK-IMP E7 $ 312.80 2

Contains

Total of 382 British Standard Imperial EPDM 80 Duro O-Rings


ORK-IMP S7 $ 504.33 2

Contains

Total of 382 British Standard Imperial Silicone 70 Duro O-Rings


ORK-BU $ 238.50 2

Contains

Total of 364 British Standard Imperial contoured Nitrile Backups

BS006 to 012 (10 each)

BS110 to 116 (14 each)

BS210 to 222 (14 each)

ORK-BUT $ 504.87 2

Contains

Total of 364 British Standard Imperial Solid PTFE Backups

Sizes as per ORK-BU

ORK-QUAD $ 238.50 2

Contains



Ver 15.06.25 11

ORK-JIS $ 199.16 2

Contains

Total of 444 Japanese Industrial Standard Nitrile 70 Duro O-Rings

P003-N7 to P025-N7

G025-N7 to G060-N7

ORK-JIS N9 $ 212.21 2

Contains

Total of 444 Japanese Industrial Standard Nitrile 90 Duro O-Rings

P003-N7 to P025-N7

G025-N7 to G060-N7

ORK-MET N7 $ 71.00 2

Contains

Total of 428 Metric European standard Nitrile 70 Duro O-Rings

5 x 2 to 13 x 2 (6 sizes)

10 x 2.5 to 22 x 2.5 (9 sizes)

19 x 3 to 38 x 3 (13 sizes)

39 x 4 to 48 x 4 (4 sizes)

ORK-9A $ 190.80 2

Contains


3 x 2 to 78 x 2 (60 sizes)

ORK-9B $ 190.80 2

Contains


3 x 3 to 78 x 3 (60 sizes)

Ver 15.06.25 12

O-RING CORD SPLICING KITS ORK-IMP SPLICING $ 79.84 2

Contains

Extruded Nitrile 70 Duro O-Ring Cord

1 metre each of 1/16 nom., 3/32 nom., 1/8 nom., 3/16 nom., nom.

20g adhesive, knife, cutting guide

ORK-MET SPLICING $ 79.84 2

Contains

Extruded Nitrile 70 Duro O-Ring Cord

1 metre each of 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 5mm, 5.7mm, 7mm

20g adhesive, knife, cutting guide

A great investment for a mobile operation.

Each kit contains lengths of quality Nitrile (NBR) o-ring cord, a knife and a bottle of adhesive bond.

Measure the length of o-ring you require, put the cord into the cutting block to make a clean cut and then bond

the ends of the cord together.

In no time at all you will have a custom made o-ring to fix your job.

Not suitable for o-rings in dynamic applications.

Ver 15.06.25 13

TOOLS & LUBRICANTS We are also able to offer a range of picks and O-Ring measuring tools

CONE-9U5155 $ 109.84 4

Just check your section in the notches on the base and then drop the O-Ring over the cone until it rest neatly on

a step and read your size number. Covers 184 common Imperial British standard sizes

TOOL-ORING CHART A2 $ 15.75 0

Set of 3 A2 laminated sheets showing exact Imperial size O-Ring profiles.

KC-16390 $ 26.36 0

Set of 4 Chrome Vanadium tipped

picks

KC-10419 $ 38.36 0

Set of 4 picks, Phillip #0, 3mm

Blade, T15 & T20 Star drivers in

plastic case

TOOL-PICKSET-8PCE $ 54.54 0

Set of 8 heavy duty picks in a blow molded case

Ver 15.06.25 14

AB Seals are proud to offer Point-Of-Sale stands

featuring blister packs of the most common fitting O-

Rings and seals.

We supply the complete stand, with signs, hooks and 2

complete sets of blister packed parts as listed below. All

packs are available separately to restock, with an easy to

use reorder form.

Parts include

O-Rings to suit

BSP -02, -04, -06, -08, -12, -16, -20, -24, -32

SAE-J518C flanges -08, -12, -16, -20, -24, -32, -40

UNO -07, -09, -12, -14, -17, -21, -26, -30

ORFS -09, -11, -13, -16, -19, -23, -32 Flaretite Seals to suit

JIC-07, -09, -12, -14, -17, -21, -26, -30 Bonded Washers to suit

BSP -02, -04, -06, -08, -10, -12, -14, -16, -20, -24 Retaining Rings to suit

BSP -02, -04, -06, 08, -12, -16, -20, -24 D-Rings to suit

Cat flanges , 1, 1 , 1 , 1 , 2, 2 , 2

All packs are labeled with the pack part number, the

fitting type, dash number and fractional size, and qty

contained. Stand can also be supplied with customized

blister pack labels showing your address and a contact

phone number. Please specify on ordering if you wish to

take this option.

This entire unit is available for just $ 567.84 + GST (CODE 1) (Part number complete POS-FITTING STAND)

Ver 15.06.25 15

AB Seals is also sells individual blister packs from the stand for use at your sales counter.

The initial range includes seals and O-Rings for common hydraulic fittings as detailed below. All parts

are labeled with the pack part number, fitting type, dash number and fractional size, and quantity

contained.

The blisterpacks are suitable for use with our mesh stands or any standard mesh slat wall or loop

hooks.

The initial range consists of 66 products as detailed overleaf, which include

O-Rings for BSP, UNO, SAE, ORFS

Flaretite seals for JIC

Cat D-Rings

BSP Retaining rings

BSP Bonded washers

Plumbing O-Rings and washers

GrabnGo Handipaks are a great way to save time

and effort on counter sales - simply identify the

fitting size and type and direct the customer to the

correct Handipak conveniently located in you sales

area.

Blisterpacks come as standard as shown above but

can be supplied with customized labels showing

your logo and contact number. Total packs must

be ordered in multiples of 30 (ie30, 60, 90 of any

combination of packs) to allow for printing of

custom labels.

Ver 15.06.25 16

GRABnGO HANDIPAKS

ALL PACKS ARE PRICE CODE 2

PART NUMBER DESCRIPTION LIST PART NUMBER DESCRIPTION LIST

PACK-ORBSP02 1/8" BSP O-RING $2.50

PACK-FTJIC30 1 7/8" JIC FLARETITE $41.22


PACK-BWBSP02 1/8" BSP DOWTY $5.62







PACK-ORBSP16 1" BSP O-RING $7.49


PACK-ORBSP20 1 1/4" BSP O-RING $8.75


PACK-ORBSP24 1 1/2" BSP O-RING $9.99


PACK-ORBSP32 2" BSP O-RING $12.50

PACK-BWBSP16 1" BSP DOWTY $7.49

PACK-ORSAE08 1/2" FLANGE O-RING $5.01

PACK-BWBSP20 1 1/4" BSP DOWTY $11.24

PACK-ORSAE12 3/4" FLANGE O-RING $6.25

PACK-BWBSP24 1 1/2" BSP DOWTY $12.50

PACK-ORSAE16 1" FLANGE O-RING $7.49

PACK-RRBSP02 1/8" BSP RETAINER $7.49

PACK-ORSAE20 1 1/4" FLANGE O-RING $5.01




PACK-ORSAE32 2" FLANGE O-RING $7.49




PACK-ORUNO07 7/16" UNO O-RING $3.74

PACK-RRBSP16 1" BSP RETAINER $5.01


PACK-RRBSP20 1 1/4" BSP RETAINER $6.25


PACK-RRBSP24 1 1/2" BSP RETAINER $6.25


PACK-CATD12 3/4 D-RING $11.24

PACK-ORUNO17 1 1/16" UNO O-RING $11.24

PACK-CATD16 1" D-RING $12.50


PACK-CATD20 1 1/4 D-RING $6.25


PACK-CATD24 1 1/2" D-RING $6.25



PACK-ORFS09 9/16" ORFS O-RING $2.50

PACK-CATD32 2" D-RING $7.49


PACK-CATD36 2 1/4 D-RING $8.75



PACK-ORFS16 1" ORFS O-RING $3.74

PACK-OR08 #8 TAP SPINDLE O-RING $2.50

PACK-ORFS19 1 3/16" ORFS O-RING $5.01

PACK-OR08.5 #8.5 TAP SPLINDLE O-RING $2.50


PACK-OR09 #9 GARDEN HODE O-RING $2.50


PACK-OR10 #10 LAUNDRY ARM O-RING $2.50

PACK-ORFS32 2" ORFS O-RING $6.25

PACK-OR14 #14 PLUMBERS O-RING $2.50

PACK-FTJIC07 7/16" JIC FLARETITE $9.99

PACK-SPOUT ASST ASSORTED SPOUT O-RINGS $2.50


PACK-TAP ASST ASSORTED TAP O-RINGS $2.50


PACK-GARDEN TAP NUT NUT & TAIL WASHERS $2.50

PACK-FTJIC14 7/8" JIC FLARETITE $12.50 PACK-H'HOLD TAP

WASHER FIBRE BODY WASHER 1/2"TAP $3.12

PACK-FTJIC17 1 1/16" JIC FLARETITE $16.24 PACK-GARDEN TAP

WASHER FIBRE BODY WASHER 5/8"TAP $2.50

PACK-FTJIC21 1 5/16" JIC FLARETITE $18.73 PACK-13MM BODY

WASHER EZKLEEN BODY WASHER $3.12

PACK-FTJIC26 1 5/8" JIC FLARETITE $22.48

PACK-BODY WASHR ASST ASSORTED FIBRE WASHERS $5.01

Ver 15.06.25 17

We recommend the following high performance lubricants.

Molytec Silicone Lubricant is a hi-performance, translucent

paste, which is non-toxic, and has an operating range of -50 to

+200 C. Silicone Lubricant has very good water repellency, is

oxidation resistant and has good adherence to dry surfaces. It is

resistant to tracking and demonstrates very low volatility.

This is an ideal assembly and operating lubricant for all oil

resistant seals and O-Rings.

Available as

25g tube Moly-M897 $ 7.65 + gst

100g tube Moly-M813 $ 22.68 + gst

500g tub Moly-M814 $ 76.41 + gst

2kg tub Moly-M815 $ 289.86 + gst

All prices are Code 4

Magnalube-G Teflon Based Grease is one of the best operating

lubricants available in the marketplace.

It constantly deposits a Teflon film on the contact surface surfaces

which continually lubricates and protects against corrosion and wear.

Magnalube-G is water resistant and will not migrate from hot

surfaces. It is serviceable under load conditions to 7000 psi and is both

mechanically and chemically stable. Operating range is from -40to

+290 C.

4 cc Blister Tube $ 5.75 + gst

21 g Tube $ 11.82 + gst

100 g Jar $ 9.56 + gst

250 g Jar $ 23.02 + gst

450 g Cartridge $ 36.42 + gst

500 g Tin $ 41.42 + gst

1 kg Tin $ 75.34+ gst

4 kg Tin $ 273.02 + gst

All prices are Code 4

grab kits - ab sealsabseals.com.au/wp-content/uploads/2015/07/ab-seals-grab-kits-ver...220 nitrile...

Documents