gr-1600xl - tadano · 2020. 2. 5. · switch, outrigger controls, free swing / lock swing selector...

Note : Dimension is with boom angle at -1.5 degree.

GENERAL DIMENSIONS

Turning radius (26.5R25☆☆ Tires)6 wheel steer2 wheel steer

32' 6"48'11"

SPEC. SHEET NO. GR-1600-3-00104/ES-01

Overall lengthOverall widthOverall heightCarrier lengthfor traveling

53' 1-3/8"10'10-1/2"12' 5"

27' 1-1/4"

approx. 16,190approx. 3,315approx. 3,785

approx. 8,260

Feet

9.914.9

Meter FeetMeter

OPTIONAL WEIGHT 11.1 t (24,500 lbs)

5,50

0 (1

8'1/

2")

7,30

0 (2

3'11

-3/8

")8,

200

(26'

10-7

/8")

2,99

0 (9

'9-3

/4")

4,860 (15'11-1/8")4,165 (13'8")

4,520 (14'10") 4,505 (14'9-1/4")4,600 (15'1")

13,050–61,000 (42'9-3/4"–200'1-1/2")2,400 (7'10-3/8")

3,78

5 (1

2'5"

)

11.9

º

16.2

º

3,500 (11'5-3/4")

12.6

º

17.4

º

2,010 (6'7-1/8") 1,100 (3'7-1/4")

10,155 (33'3-3/4")2,000 (6'6-3/4") 2,145 (7'1/4")4,000 (13'1-1/2")8,045 (26'4-7/8")

16,190 (53'1-3/8")

2,599 (8'6-1/4")

3,315 (10'10-1/2")

(φ1'

10-1

/2")

5

70

GR-1600XL(Left-hand drive)

160 Ton (145 Metric Ton) Capacity

HYDRAULIC ROUGH TERRAIN CRANE

DIMENSIONS

Speci�cations are subject to change without notice.

-2 -


BOOM6 sections boom of round box construction with 7 sheaves at boom head, extended by single telescoping cylinder.2 easily removable wire rope guards, rope dead end provided on both sides of boom head. Boom telescope sections are supported by wear pads both vertically and horizontally. Fully retracted length....... 13.1 m (42.8') Fully extended length ...... 61.0 m (200.1') Extension speed.............. 47.9 m (157.3') in 450 s Sheave root diameter ...... 0.400 m (15-3/4")

BOOM ELEVATIONBy a double acting hydraulic cylinder with holding valve. Boom angle indicator.Automatic speed reduction and slow stop function. Boom angle ..................... -1.5–81.5º Boom raising speed ........ 20º to 60º in 28 s

JIB2 stage bi-fold lattice type, offset angle (5–40º) by tilt cylinder.Single sheave at the head of both jib sections. Stowed alongside base boom section. Assistant cylinders for mounting and stowing, controlled at right side of superstructure.Self stowing jib mounting pins. Length ............................. 10.3 m, 18.0 m (33.8', 59.1') Offset............................... 5–40˚ Sheave root diameter ...... 0.440 m (17-5/16")

INSERT JIB (OPTION)Insert lattice jib can be used for reaching higher place. Length .................. 7.0 m (1 pce.), 14.0 m (2 pcs.), (23.0', 45.9')

SHORT JIB (OPTION)2 sheaves, heavy lifting jib can be used for lifting lifting heavy load in tight spaces. Length ............................ 3.6 m (11.8') Offset.............................. 20º, 40º Sheave root diameter ..... 0.419 m (16-1/2")

AUXILIARY LIFTING SHEAVE (SINGLE TOP)Single sheave, mounted to main boom head for single line work (stowable). Root diameter.................. 0.440 m (17-5/16")

ANTI-TWO BLOCK DEVICEPendant type over-winding cut out device with audio-visual (FAILURE lamp/BUZZER) warning system.

SLEWINGHydraulic axial piston motor driven through planetary slewing speed reducer. Continuous 360º full circle slewing on ball bearing turn table at 1.3min-1 {rpm}. Equipped with manually locked/released slewing brake. A 360º positive swing lock manually engaged in cab. Twin slewing system: Free slewing or lock slewing controlled by selector switch on front console. Slewing speed................. 1.3 min-1 {rpm}

COUNTERWEIGHTStandard weight ...................18,200 kg (40,100 lbs)Extra weight right (option) ..... 5,550 kg (12,250 lbs)Extra weight left (option)........ 5,550 kg (12,250 lbs)

WINCHMAIN WINCHVariable speed type with grooved drum driven by hydraulic axial piston motor through speed reducer. Power load lowering and raising. Equipped with automatic brake (neutral brake) and counterbalance valve. Controlled independently of auxiliary winch. Equipped with cable follower and drum rotation indicator.

MAIN DRUM Root diameter x wide ............. 0.382 m (15") x 0.742 m (29-1/4") Wire rope diameter x length ........ 19 mm (3/4") x 320 m (1,050') Drum capacity ........................................ 394 m (1293'), 7 layers Maximum single line pull (1st layer).............9,900 kg (21,800 lbs) Maximum permissible linepull wire strength...7,200 kg (15,900 lbs)

AUXILIARY WINCHVariable speed type with grooved drum driven by hydraulic axial piston motor through speed reducer.Power load lowering and raising. Equipped with automatic brake (neutral brake) and counterbalance valve. Controlled independently of main winch. Equipped with cable follower and drum rotation indicator.

AUXILIARY DRUM Root diameter x wide ............. 0.382 m (15") x 0.742 m (29-1/4") Wire rope diameter x length ........... 19 mm (3/4") x 225 m (738') Drum capacity ........................................ 394 m (1293'), 7 layers Maximum single line pull (1st layer).............9,900 kg (21,800 lbs) Maximum permissible linepull wire strength...7,200 kg (15,900 lbs)

WIRE ROPENon-rotating 19 mm (3/4") 7x35 class.Breaking Strength 36,000 kg (79,400 lbs)

HOOK BLOCKS100 metric ton (110 ton, option) .... 7 sheaves with hook block and

safety latch.45 metric ton (50 ton, option) ........ 3 sheaves with hook block and

safety latch.7.2 metric ton (7.9 ton, option) ...... Weighted hook with swivel and

safety latch.

HYDRAULIC SYSTEMPUMPS2 variable piston pumps for crane functions.Tandem gear pump for steering, swing and optional equipment. Powered by carrier engine. Pump disconnect for crane isengaged/ disengaged by rotary switch from operator's cab.

CONTROL VALVESMultiple valves actuated by pilotpressure with integral pressure relief valves.

RESERVOIR763 lit. (202 gallon) capacity. External sight level gauge.

FILTRATIONBETA10=10 return �lter, full �ow with bypass protection, located inside of hydraulic reservoir. Accessible for easy replacement.

OIL COOLERAir cooled fan type.

CAB AND CONTROLSBoth crane and drive operations can be performed from onecab mounted on rotating superstructure.

15º tilt, Left side, 1 man type, steel construction with sliding door access and safety glass windows opening at side. Door window is powered control. Windshield glass window and roof glass window are shatter-resistant. Tilt-telescoping steering wheel. Adjustable control lever stands for swing, boom elevating, boom telescoping, auxiliary winch and main winch. Control lever stands can change neutral positions and tilt for easy access to cab. 3 way adjustable operator's seat with high back, headrest and armrest. Engine throttle knob. Foot operated controls: boom elevating boom telescoping, service brake and engine throttle. Hot water cab heater and air conditioning.

Dash-mounted engine start/stop, monitor lamps, cigarettelighter, drive selector switch, parking brake switch, steering mode select switch, power window switch, pump engaged/ disengaged switch, swing brake switch, telescoping/auxiliary winch select switch, outrigger controls, free swing / lock swing selector switch, eco mode switch, high speed winch (main/aux) switch and ashtray.

Instruments - Torque converter oil temperature, engine watertemperature, air pressure, fuel, speedometer, tachometer, hour meter and odometer / tripmeter. Hydraulic oil pressure is monitored and displayed on the AML-C display panel.

-3 -


CRANE SPECIFICATIONS

CARRIER SPECIFICATIONS

Tadano electronic LOAD MOMENT INDICATOR system(AML-C) including:

• Control lever lockout function with audible and visual pre-warning

• Boom position indicator• Outrigger state indicator• Boom angle / boom length / jib offset angle / jib length / load

radius / rated lifting capacities / actual loads read out• Ratio of actual load moment to rated load moment indication• Automatic speed reduction and slow stop function on boom

elevation and slewing• Working condition register switch• Load radius / boom angle / tip height / slewing range preset

function• External warning lamp• Tare function• Fuel consumption monitor• Main winch / auxiliarly winch select• Drum rotation indicator (audible and visible type) main and

auxiliary winch

TADANO AML-C monitors outrigger extended length and automatically programs the corresponding "RATED LIFTING CAPACITIES" table.

Operator's right hand console includes transmission gear selector and sight level bubble. Upper console includes working light switch, roof washer and wiper switch emergency outrigger set up key switch, jib equipped/removed select switch, eco mode switch, high speed winch (main / aux) switch, Cab tilt switch. Slewing lock lever.

NOTE: Each crane motion speed is based on unladen conditions.

TYPERear engine, left hand steering, driving axle 2-wayselected type by manual switch, 6x2 1st drive, 6x4 1st and 3rd drive.

FRAMEHigh tensile steel, all welded mono-box construction.

ENGINEModel MITSUBISHI 6M60-TL (Tier2)Type Direct injection dieselNo. of cylinders 6Combustion 4 cycle, turbo charged and after cooledBore x Stroke, mm. (in) 118 x 115 (4.646 x 4.528)Displacement, liters (cu. in) 7.54 (460)Air inlet heater 24 volt preheatAir cleaner Dry type, replaceable elementOil �lter Full �ow with replaceable elementFuel �lter Full �ow with replaceable elementFuel tank, liters (gal.) 300 (79.2), right side of carrierCooling Liquid pressurized, recirculating by-passRadiator Fin and tube core, thermostat controlledFan, mm (in.) Suction type, 6-blade, 600 (23.6) dia.Starting 24 voltCharging 24 volt system, negative groundBattery 2-120 amp. HourCompressor, air, l /min (CFM) 830 (29) at 2,600 rpmOutput, Max. kW (HP) Gross 200 (267) at 2,600 rpmTorque, Max. Nm (ft-lb) 785 (579) at 1,400 rpmCapacity, liters (gal.)

Cooling water 13 (3.4)Lubrication 13–15 (3.4–4.0)Fuel 300 (79.2)

TRANSMISSIONElectronically controlled full automatic transmission. Torque converter driving full powershift with driving axle selector. 5 forward and 2 reverse speeds, constant mesh.

2 speeds - high range - 2 wheel drive; 4 wheel drive3 speeds - low range - 4 wheel drive

TRAVEL SPEED15 km/h (9.3 mph) with counterweight4 km/h (2.5 mph) without counterweight

GRADE ABILITY (tanθ) - 44% (with counterweight 29.3 t (64,600 lbs)), 52% (with counterweight 18.2 t (40,100 lbs)), 30%** Machine should be operated within the limit of engine crankcase

design (17º: MITSUBISHI 6M60-TL).

AXLE1st: Full �oating type, steering and driving axle with planetary reduction and open differential. 2nd: Steering and not driving axle.3rd: Full �oating type, steering and driving axle with planetary reduction and open differential.

STEERINGHydraulic power steering controlled by steering wheel. Four steering modes available: 2 wheel front, 4 wheel rear, 6 wheel coordinated and 6 wheel crab.

SUSPENSION1st: Rigid mounted to frame. 2nd and 3rd: "Hydro-Pneumatic suspension cylinders" with

levering adjustment and oscillation.

BRAKE SYSTEMSService: Air over hydraulic disc brakes onall 6 wheels. Parking/Emergency: Spring applied-air released brake acting on input shaft of 1st and 3rd axle. Auxiliary: Electro- pneumatic operated exhaust brake.

TIRES - 26.5R25☆☆ Air pressure: 650 kPa (94 psi)

OUTRIGGERSFour hydraulic, beam and jack outriggers.Vertical jack cylinders equipped with integral holding valve. Each outrigger beam and jack is controlled independently from cab.Beams extend to 8.2 m (26'10-7/8") center-line and retract to within 3.315 m (10' 10-1/2") overall width with �oats.Outrigger boxes are self-removable for ease of transportation. Outrigger jack �oats are attached thus eliminating the need of manually attaching and detaching them. Controls and sight bubble located in superstructure cab. Four outrigger extension lengths are provided with corresponding "RATED LIFTING CAPACITIES" for crane duty in con�ned areas.Min. Extension 2.99 m (9' 9-3/4") center to centerMid. Extension 5.50 m (18' 1/2") center to centerMid. Extension 7.30 m (23'11-3/8") center to centerMax. Extension 8.20 m (26'10-7/8") center to centerFloat size (Diameter) 0.57 m (1'10-1/2")

-3 -

STANDARD EQUIPMENT- Six section extended boom by single telescoping cylinder

13.1 m–61.0 m (42.8'–200.1')- 10.3 m (33.8') or 18.0 m (59.1') bi-fold lattice jib, offset angle (5–40º)

by tilt cylinder.- Quick reeving type bi-fold jib- Anti-Two block device (overwind cutout)- Mirror for main and auxiliary winch- Work lights- Variable speed main winch with grooved drum, cable follower and

320 m of 19 mm (1050' of 3/4") cable.- Variable speed auxiliary winch with grooved drum, cable follower and

225 m of 19 mm (738' of 3/4") cable.- Drum rotation indicator (audible,visible and thumper type) main and

auxiliary winch- Auxiliary lifting sheave (single top) stowable- 2-speed winch- Tadano twin swing system and 360º positive swing lock- Positive control- Hydraulic oil cooler- 15º tilt cab- 3 way adjustable cloth seat with armrests, high back and seat belt- Tilt-telescoping steering wheel- Tinted safety glass and sun visor- Front windshield wiper and washer- Roof window wiper and washer- Power window (cab door )- Cigarette lighter and ashtray- Cab �oor mat- Pump disconnect in operator's cab- Air conditioner (hot water heater and cooler)- Full instrumentation package- Self centering �nger control levers with pilot control- Control pedals for boom elevating and boom telescoping- Low oil pressure/high water temp. warning device (visual)- 2nd and 3rd steer centering light- Air cleaner dust indicator- Tadano electronic load moment indicator system (AML-C)- Tare function

- Boom angle indicator- Outrigger extension length detector- Electronic crane monitoring system- Rear view mirrors (right and left side)- Fenders- Air dryer- Complete highway light package- Towing hooks-Front and rear- Hook block tie down (front bumper)- Weighted hook storage compartment- Halogen head lamp- Self-removable outrigger boxes- Independently controlled outriggers- Four outrigger extension positions- Self-storing outrigger pads- Electronic controlled automatic transmission driven by torque

converter- 6 x 4 x 6 drive/steer- 1st axle: open differential- 3rd axle: open differential- Automatic rear axle oscillation lockout system- 26.5R25☆☆ tires- Disc brakes- Water separator with �lter (high �ltration)- Back-up alarm- 24 volt electric system- Tool storage compartment- Tire in�ation kit- Mitsubishi 6M60-TLA3B turbo charged after cooled engin (267HP)

with exhaust brake- Engine over-run alarm- Lifting eyes- Fuel consumption monitor- Eco mode system- Self-removable counterweight

OPTIONAL EQUIPMENT

LINE SPEEDS AND PULLS DRUM WIRE ROPE CAPACITIES

- Additional weight 11.1 t (24,500 lbs)- Removable boom system- Working lamp with remort controller- Boom and jib mounted aircraft warning light- Wind speed indicator- Emergency steering system- Over-unwinding prevention- Insert jib- Short jib

- 100 metric ton (110 ton) - 7 sheaves with hook block and safety latch- 45 metric ton (50 ton) - 3 sheaves with hook block and safety latch- 7.2 metric ton (7.9 ton) - Weighted hook with swivel and safety latch- Telematics (machine data logging and monitoring system) with

HELLO-NET via internet (availability depends on countries)- Outrigger load display and warning- Inclinometer (electronic inclination indicator)

HOISTING PERFORMANCE

- Maximum permissible line pull wire strength.7,200 kg (15,900 lbs) with 7 x 35 class rope.

1 Line speed based only on hook block, not loaded.2 Developed by machinery with each layer of wire rope, but not based

on rope strength or other limitations in machinery or equipment.3 Seventh layer of wire rope are not recommended for hoisting

operations.

LayerLine speeds1 Line pulls Available2

1st2nd3rd4th5th6th

7th3

Lbs.21,80019,90018,20016,80015,60014,60013,700

kgf9,9009,0108,2707,6407,0906,6206,210

F.P.M253276299318341361384

m/min77849197104110117

F.P.M354384413446476505535

m/min108117126136145154163

DRUM DIMENSIONS (Main and auxiliary)

Root diameterLengthFlange diameter

Inch15

29-1/426-5/8

mm382742677

Wireropelayer

Total wire ropeRope per layer

Main or auxiliary winch - 0.382 m (15") drum Main and auxiliary drum grooved lagging19 mm (3/4") wire rope

1234567

Meter44.848.652.556.360.163.967.7

Meter44.893.4

145.9202.2262.3326.2393.9

Feet147.0159.4172.2184.7197.2209.6222.1

Feet147.0306.4478.7663.4860.6

1070.21292.3

LowLow High

-4 -


BOOM

SINGLE TOP

JIB

Hydraulic offset jibCounterweight 29.3 t

0.6 m

Approx.2.6 m

Approx. 3.3 m

Approx.2.3 m

LIFT

ING

HE

IGH

T (m

)

LOAD RADIUS (m)

85

80

75

70

65

60

55

50

45

40

35

30

25

20

15

10

5

050 10 15 20 25 30 35 40 45 50 55 60 65

16°

30°

40°

50°

33°

45°

10°

0°

20°

61.0-m Boom

57.0-m Boom

52.6-m Boom48.2-m Boom





81.5°

70°

60°

61.0-m Boom + 18.0-m JIB

61.0-m Boom + 10.3-m JIB

40°20°5°

-5 -

GR-1600XL WORKING RANGE CHARTSPEC. SHEET NO. GR-1600-3-00104/ES-01

NOTE: Boom and jib geometry shown are for unloaded condition and machine standing level on �rm supporting surface.Boom de�ection and subsequent radius and boom angle change must be accounted for when applying load to hook.

BOOM

SINGLE TOP

JIB

Hydraulic offset jib

Counterweight 29.3 t

Approx.2.6 m

Approx. 3.3 m

Approx.2.3 m

0.6 m

7.0 m Insert jib *Option

LIFT

ING

HE

IGH

T (m

)

LOAD RADIUS (m)


61.0-m Boom 48°

50°

60°

70°

81.5°

61.0-m Boom + 7.0-m INSERT JIB + 18.0-m JIB

85

80

75

70

60 0

5

10

15

20

25

30

35

40

45

50

55

60

65

555045403530252015100 5 65

90

40°20°5°

-6 -


Hydraulic offset jib 14.0 m Insert jib *OptionCounterweight 29.3 t

BOOM

SINGLE TOP

JIB

Approx.2.6 m

Approx. 3.3 m

Approx.2.3 m

0.6 mLIFT

ING

HE

IGH

T (m

)

LOAD RADIUS (m)


61.0-m Boom

55°

58°

60°

61.0-m Boom + 14.0-m INSERT JIB + 18.0-m JIB

81.5°

70°

5°

40°20°

85

90

85

80

75

70

60 0

5

10

15

20

25

30

35

40

45

50

55

60

65

555045

90

65403530252015100 5

-7 -



BOOM

SINGLE TOP

JIB

Short jib *OptionCounterweight 29.3 t

Approx.2.6 m

Approx. 3.3 m

Approx.2.3 m

0.6 m

LIFT

ING

HE

IGH

T (m

)

LOAD RADIUS (m)

50 10 15 20 25 30 35 40 6545 50 55

65

60

55

50

45

40

35

30

25

20

15

10

5

060

70

61.0-m Boom + 3.6-m JIB

81.5°

70°

50°

60°

40°

30°

20°

40°

-8 -


-9-

GR-1600XL RATED LIFTING CAPACITIES (IN METRIC TON)SPEC. SHEET NO. GR-1600-3-00104/ES-01

13.1 m 17.4 m 21.8 m 26.2 m 30.6 m 35.0 m 39.4 m 43.8 m 48.2 m 52.6 m 57.0 m 61.0 m

**145.0*110.6*101.5

93.685.979.373.568.363.759.656.052.746.837.3

90.790.790.790.183.778.173.268.364.160.056.453.147.341.737.133.427.8

79.079.079.079.079.075.871.066.763.660.256.553.247.541.937.333.527.623.321.3

37.066.066.066.066.066.063.560.557.855.352.947.241.637.534.328.424.020.618.416.3

37.048.248.248.248.248.248.248.248.044.841.637.733.928.024.321.318.516.114.112.3

8.2

35.235.238.737.535.935.235.235.235.233.231.528.424.320.918.115.713.612.811.410.1

8.4

30.130.130.129.527.926.224.422.720.919.317.816.515.414.112.310.8

9.68.57.66.8

22.123.923.922.922.021.019.217.115.414.012.711.710.810.0

9.28.67.97.16.45.8

17.218.918.918.416.915.514.312.911.810.810.1

9.48.88.27.46.66.15.85.34.8

13.515.015.015.014.113.112.111.210.4

9.68.88.27.77.36.96.35.65.04.54.13.72.8

12.012.012.012.011.210.4

9.89.18.58.07.47.06.55.85.24.64.13.73.22.82.52.2

10.410.410.410.2

9.69.08.47.87.36.76.25.85.45.04.64.13.63.22.82.42.11.8

**Over front with special equipment *With special Equipment

AB

A: Boom length (m)B: Load radius (m)

Boom

NOTE: In this table, the thick line which divides strength area and stability area is not shown because the �gure of this table is indicated the best performance at the same boom length among the plural telescopic boom patterns.

COUNTERWEIGHT 29.3 t (64,600 lbs)ON OUTRIGGERS FULLY EXTENDED 8.2 m (26'10-7/8'') SPREAD

360º ROTATION (Unit: x 1,000 kg)

2.503.003.504.004.505.005.506.006.507.007.508.009.00

10.0011.0012.0014.0016.0018.0020.0022.0024.0026.0028.0030.0032.0034.0036.0038.0040.0042.0044.0046.0048.0050.0052.0054.0056.00

(42.8') (57.2') (71.6') (86.1') (100.5') (114.9') (129.3') (143.7') (158.1') (172.5') (187.0') (200.1')


81.58180797877767573706865636058555350484543403835333028252320G

RC

W R W R W14.715.617.218.820.521.923.324.527.331.033.537.239.242.544.547.249.251.653.355.656.958.960.161.662.764.0

5.55.55.55.55.55.45.25.04.84.34.13.83.63.33.12.82.72.42.22.01.81.61.41.11.00.8

17.418.619.921.222.624.425.326.729.333.035.438.840.943.846.048.650.452.854.356.457.859.560.762.163.0

5.55.55.45.25.04.94.74.64.44.03.83.63.43.13.02.72.62.32.11.91.81.51.31.10.9

20.421.122.624.025.226.527.828.931.334.837.040.142.245.147.049.651.153.454.856.8

5.15.04.94.74.64.54.44.24.03.83.63.43.33.02.92.72.52.22.11.9

COUNTERWEIGHT 29.3 t (64,600 lbs)ON OUTRIGGERS FULLY EXTENDED 8.2 m (26'10-7/8") SPREAD

360º ROTATION61.0-m (200.1') Boom + 10.3-m (33.8') Hydraulic offset jib

20º Tilt 40º Tilt5º Tilt

81.58180797877767573706865636058555350484543403835333028252320G

RC

W R W R W12.913.715.216.718.219.620.822.124.628.230.633.836.139.141.243.945.648.249.651.753.155.056.257.858.860.261.062.162.763.5

6.26.26.26.26.26.26.05.85.45.04.74.34.23.93.73.53.33.12.92.62.42.22.01.71.61.31.21.11.00.9

15.716.517.919.320.621.923.224.326.830.332.435.637.740.642.545.246.949.250.652.754.055.756.858.359.260.461.262.0

6.26.26.15.95.75.65.45.24.94.64.34.03.93.73.53.33.22.92.82.52.42.11.91.61.51.31.21.0

18.719.320.621.923.024.325.426.628.932.134.237.139.041.943.746.147.749.951.253.1

5.85.75.55.45.25.14.94.84.64.34.13.83.73.53.43.23.12.92.72.5

57.0-m (187.0') Boom + 10.3-m (33.8') Hydraulic offset jib20º Tilt 40º Tilt5º Tilt

81.58180797877767573706865636058555350484543403835333028252320G

RC

W R W R W11.312.013.414.816.117.518.819.622.025.727.931.033.236.037.840.442.044.445.948.049.351.152.253.754.755.956.857.858.459.2

7.27.27.27.27.27.27.26.96.55.95.65.25.04.64.44.13.93.73.53.23.02.72.52.22.01.71.61.41.31.2

14.315.016.317.618.819.921.122.324.427.629.832.734.637.539.241.743.345.546.948.850.051.752.854.255.156.357.057.9

7.27.27.27.06.86.66.46.25.85.45.24.84.64.44.23.93.83.53.33.02.92.62.42.11.91.71.51.4

17.418.019.220.321.422.523.624.626.729.631.634.336.138.840.442.744.146.147.449.3

6.86.76.56.36.15.95.85.65.45.04.84.54.44.24.03.83.63.43.23.0



20º Tilt

1

40º Tilt5º Tilt

81.58180797877767573706865636058555350484543403835333028252320G

RC

W R W R W

11.813.415.617.219.320.722.824.126.027.229.030.131.732.734.135.136.537.238.439.039.940.541.2

12.812.211.310.810.19.69.08.78.27.97.67.47.17.06.86.66.56.46.36.05.75.65.4

8.99.3

10.110.911.912.613.314.115.617.919.321.422.824.826.027.929.030.731.733.234.235.436.337.538.239.239.840.5

10.610.510.210.09.79.59.39.18.78.27.97.67.47.16.96.76.56.46.36.16.16.05.95.95.85.85.85.6

11.311.712.513.214.014.815.516.217.619.721.022.924.226.027.228.929.931.432.433.8

7.37.27.17.06.96.96.86.76.56.36.26.16.05.95.85.75.75.75.65.6

35.0-m (114.9') Boom + 10.3-m (33.8') Hydraulic offset jib20º Tilt

2

1 1

40º Tilt5º Tilt

- 10 -

Jib

C: Loaded boom angle (º)R: Load radius (m)W: Rated lifting capacity (Unit: x 1,000 kg)G: Number of parts of line


81.58180797877767573706865636058555350484543403835333028252320G

RC

W R

1 1

1 1

W R W17.118.019.921.623.425.026.828.531.435.638.442.144.748.450.553.755.658.359.962.463.965.8

3.73.73.73.73.73.73.73.73.53.23.12.82.72.52.32.11.91.71.51.31.20.9

22.022.724.726.327.929.330.932.335.039.041.345.347.550.852.955.857.560.061.463.765.066.8

3.73.73.73.73.63.53.43.33.12.92.72.62.52.32.22.01.81.61.41.21.10.8

27.128.029.631.132.534.035.336.439.242.644.948.150.353.355.157.659.161.162.564.3

3.23.23.13.13.03.03.02.92.82.62.52.42.32.22.11.91.71.51.41.1


360º ROTATION61.0-m (200.1') + 18.0-m (59.1') Hydraulic offset jib


81.58180797877767573706865636058555350484543403835333028252320G

RC

W R W R W14.615.017.218.820.321.923.525.028.132.234.838.541.044.546.649.751.554.155.958.259.661.763.064.765.9

4.04.04.04.04.04.04.04.04.03.73.53.33.23.02.92.72.52.22.11.81.71.51.31.00.9

20.020.822.523.825.426.728.229.632.336.238.642.144.447.549.652.554.156.658.060.361.563.164.365.766.6

4.04.04.03.93.83.73.63.63.53.33.23.02.92.72.62.52.32.11.91.71.61.31.20.90.8

24.725.527.028.329.731.032.333.435.939.441.844.746.849.751.554.155.457.558.860.6

3.33.33.23.23.23.13.13.03.02.92.82.82.72.62.52.42.22.01.91.7


81.58180797877767573706865636058555350484543403835333028252320G

RC

W R W R W13.714.516.117.619.220.522.023.426.430.034.636.238.441.643.746.548.451.052.654.956.358.259.661.462.564.065.066.1

4.74.74.74.74.74.74.74.74.64.34.24.03.83.63.43.23.02.72.52.32.21.91.71.41.31.11.00.8

18.819.621.122.423.825.026.327.730.133.736.039.441.344.546.549.550.853.154.556.657.859.560.662.163.164.365.0

4.44.44.34.24.14.03.93.93.73.53.43.33.23.13.13.02.82.52.42.22.01.71.51.31.21.00.9

23.223.925.226.427.728.929.931.233.436.638.741.543.546.248.050.351.853.755.056.8

3.43.43.43.33.33.33.23.23.13.03.02.92.92.82.82.82.72.42.32.1




81.58180797877767573706865636058555350484543403835333028252320G

RC

W R W R W9.29.6

10.711.712.713.614.615.617.420.121.824.426.028.429.932.133.635.637.038.840.041.643.744.245.146.447.248.248.849.6

6.46.46.46.46.46.46.46.46.05.65.35.04.84.64.44.24.13.93.83.73.63.53.43.33.33.23.23.13.13.1

13.614.015.016.016.917.818.619.521.423.825.527.929.431.633.135.136.538.339.641.242.243.644.545.846.547.548.148.8

5.45.35.25.15.04.84.74.64.54.24.13.93.83.63.63.43.43.33.33.23.23.13.13.13.13.13.13.1

17.918.419.320.120.921.722.523.324.927.128.530.632.034.035.337.138.139.740.742.0

3.73.73.63.63.63.53.53.53.43.33.23.23.23.13.13.03.03.03.03.0


- 11 -

Jib

C: Loaded boom angle (º)R: Load radius (m)W: Rated lifting capacity (Unit: x 1,000 kg)G: Number of parts of line

- 12 -


81.581807978777675737068656360585553504845434038353330282523

19.320.322.424.326.328.129.831.434.639.442.246.549.253.255.658.960.863.765.5

3.13.13.13.13.13.02.92.82.62.42.22.01.91.81.71.51.31.10.9

24.325.327.429.130.732.634.135.638.542.945.749.752.256.058.261.363.165.7

2.92.92.92.82.72.72.62.52.32.12.01.91.81.71.61.41.21.0

29.130.031.933.635.136.538.039.542.046.048.552.154.457.759.762.464.166.4

2.62.62.62.62.52.42.32.32.12.01.91.81.71.61.51.31.20.9

C:R:W:G:

Loaded boom angle (º)Load radius (m)Rated lifting capacity (Unit: x 1,000 kg)Number of parts of line

G 1

RC 5º Tilt

61.0-m (200.1') Boom + 7.0-m (23.0') Insert jib + 18.0-m (59.1') Hydraulic offset jib20º Tilt 40º Tilt

W R W R W81.581807978777675737068656360585553504845434038353330282523

17.518.420.322.223.925.727.428.931.936.339.343.245.749.652.055.457.360.061.864.165.7

3.43.43.43.43.43.43.33.23.02.82.72.52.32.22.12.01.81.51.41.11.0

22.323.225.126.928.530.031.532.935.940.042.746.649.152.554.757.859.762.263.565.767.2

3.23.23.23.23.13.02.92.82.72.52.42.32.22.01.91.81.71.51.21.00.8

27.027.929.531.232.534.035.636.839.543.445.849.151.554.556.659.360.762.964.266.2

2.72.72.72.72.62.62.62.52.42.32.22.12.11.91.91.81.61.41.20.9

G 1

RC 5º Tilt


W R W R W


360º ROTATION Insert jib: Option

Insert jib: Option

81.581807978777675737068656360585553504845434038353330282523

15.816.718.520.121.823.425.126.529.433.436.240.242.546.148.451.553.456.157.860.261.663.664.9

3.93.93.93.93.93.93.93.83.63.33.23.02.82.72.62.42.22.01.81.61.41.10.9

20.821.623.424.826.327.829.230.633.337.339.843.445.749.051.354.256.158.460.062.063.265.066.2

3.63.63.63.53.43.33.23.13.02.82.72.52.42.32.32.22.11.81.71.41.20.90.8

25.125.827.428.930.331.632.934.136.640.242.445.747.950.852.855.557.159.360.662.4

2.82.82.82.82.82.72.72.62.52.42.32.22.22.12.12.02.01.81.61.3

G 1

RC 5º Tilt


W R W R W81.581807978777675737068656360585553504845434038353330282523

10.110.812.013.114.315.416.417.519.622.624.527.429.232.033.636.237.840.241.643.845.147.048.249.950.952.253.154.254.9

5.45.45.45.45.45.45.35.14.84.34.03.73.53.23.02.82.72.62.52.42.32.22.12.12.02.02.01.91.9

14.715.316.517.618.619.620.621.623.626.528.431.132.835.336.939.240.742.944.246.247.349.050.051.452.353.454.054.9

4.54.54.54.44.24.14.03.83.63.33.23.02.82.72.62.42.42.32.22.12.12.02.01.91.91.91.91.9

19.419.921.022.022.923.824.825.727.430.031.734.035.637.939.341.342.644.445.447.0

3.33.33.33.23.23.13.03.02.82.72.62.52.42.32.22.22.12.12.02.0

G 1

RC 5º Tilt


W R W R W


360º ROTATION

Jib

- 13 -


81.581807978777675737068656360585553504845434038353330282523

21.522.725.027.129.731.433.535.438.944.047.151.954.859.161.565.0

2.12.12.12.12.12.12.12.01.91.71.51.41.31.21.00.8

26.427.529.831.833.835.637.439.042.547.150.254.757.461.463.8

2.12.12.12.12.12.01.91.81.71.51.41.31.21.11.0

32.133.135.036.838.540.041.743.246.250.353.257.159.663.365.3

2.12.12.02.01.91.81.81.71.61.41.31.21.11.10.9

C:R:W:G:


G 1

RC 5º Tilt

61.0-m (200.1') Boom + 14.0-m (45.9') Insert jib + 18.0-m (59.1') Hydraulic offset jib

20º Tilt 40º TiltW R W R W

81.581807978777675737068656360585553504845434038353330282523

19.920.922.924.926.728.630.232.235.540.343.547.950.654.857.260.763.065.8

2.82.82.72.72.62.52.42.42.22.01.91.71.61.51.41.21.10.8

24.525.527.629.531.132.834.636.139.443.846.951.153.757.559.863.265.067.9

2.42.42.42.42.32.22.22.12.01.81.71.61.51.41.31.21.00.8

29.630.632.634.035.837.238.840.243.147.250.053.856.259.861.764.566.268.8

2.22.22.22.12.12.02.01.91.81.71.61.51.41.41.31.11.00.8

G 1

RC 5º Tilt



COUNTERWEIGHT 29.3 t (64,600 lbs) ON OUTRIGGERS FULLY EXTENDED 8.2 m (26'10-7/8") SPREAD

360º ROTATION

81.581807978777675737068656360585553504845434038353330282523

18.019.020.822.624.226.227.829.332.537.140.144.347.050.853.356.958.861.763.666.267.9

3.23.23.13.02.92.92.82.72.52.32.22.01.91.81.71.61.41.21.10.90.8

22.423.425.326.928.430.131.733.236.140.443.247.249.753.455.759.261.263.965.567.9

2.72.72.72.62.52.52.42.32.22.01.91.81.71.61.51.51.41.21.00.9

27.528.230.131.533.134.535.937.340.243.946.650.252.555.957.860.962.664.966.368.6

2.42.42.42.32.32.22.12.12.01.81.81.71.61.51.41.41.31.11.00.9

G 1

RC 5º Tilt



81.581807978777675737068656360585553504845434038353330282523

12.012.814.115.416.617.819.120.122.625.928.131.333.436.438.341.142.945.547.149.551.053.154.356.157.358.859.760.961.6

4.44.44.44.34.24.03.93.73.53.12.92.72.52.32.11.91.81.71.61.51.41.41.31.21.21.11.11.11.0

16.417.118.419.620.822.023.024.226.429.631.734.736.739.341.243.945.648.049.551.653.054.956.057.658.559.860.561.5

3.63.63.63.53.43.33.13.02.92.62.42.22.11.91.81.71.61.51.41.31.31.21.21.21.11.11.11.0

21.221.923.024.125.226.127.228.330.233.135.037.739.542.043.645.947.349.450.752.5

2.92.92.92.82.72.62.52.52.32.12.01.91.81.71.61.51.41.41.31.3

G 1

RC 5º Tilt



COUNTERWEIGHT 64,600 lbs (29.3 t)ON OUTRIGGERS FULLY EXTENDED 26'10-7/8'' (8.20 m) SPREAD

360º ROTATION

Jib

Insert jib: Option

Insert jib: Option

- 14 -


81.581807978777675737068656360585553504845434038353330282520

14.114.816.117.418.519.720.922.024.327.429.532.534.437.239.041.643.245.346.748.749.951.752.854.355.256.6

9.49.29.08.78.48.17.87.57.06.35.95.35.04.54.33.93.73.12.72.32.01.71.51.21.00.8

15.616.217.518.719.820.922.123.225.328.530.433.435.237.939.542.143.545.546.848.850.051.8

9.29.18.88.58.27.97.77.46.96.25.85.34.94.54.23.93.52.92.62.21.91.6

C:R:W:G:


G 2

RC 20º Tilt

61.0-m (200.1') Boom + 3.6-m (11.8') Short jib40º Tilt

W R W81.581807978777675737068656360585553504845434038353330282520

12.713.314.515.516.617.818.819.922.025.026.929.831.634.235.938.339.942.043.345.246.448.149.250.651.652.853.654.656.0

10.810.710.310.09.69.39.08.78.17.46.96.36.05.45.14.74.54.03.63.12.82.42.21.91.71.51.41.21.0

13.614.215.416.417.618.619.620.722.725.727.630.332.234.636.338.640.142.143.445.246.448.1

10.510.310.09.69.39.08.78.47.97.36.86.25.95.45.14.74.53.93.53.02.72.3

G 2

RC 20º Tilt

57.0-m (187.0') Boom + 3.6-m (11.8') Short jib

52.6-m (172.5') Boom + 3.6-m (11.8') Short jib 35.0-m (114.9') Boom + 3.6-m (11.8') Short jib

40º TiltW R W


360º ROTATION

81.581807978777675737068656360585553504845434038353330282520

11.211.812.913.915.016.017.018.019.922.724.427.028.731.132.735.036.538.439.741.542.644.245.246.647.548.749.450.451.7

13.112.912.412.011.611.210.710.39.68.68.07.36.96.36.05.65.34.74.33.83.43.02.72.42.21.91.81.61.4

12.112.713.814.815.816.817.818.720.623.324.827.629.231.633.135.336.738.639.841.542.644.2

12.612.411.911.511.110.810.410.09.38.47.97.26.86.35.95.55.24.64.23.63.32.9

G 2

RC 20º Tilt 40º Tilt

W R W81.581807978777675737068656360585553504845434038353330282520

6.56.87.58.28.99.5

10.210.812.114.015.317.118.319.921.022.523.524.925.827.127.929.029.830.831.432.332.933.634.6

22.222.021.721.321.020.720.420.119.618.918.518.017.716.916.315.214.112.611.810.810.29.48.98.38.07.67.37.06.5

6.97.27.98.69.29.9

10.511.212.514.315.617.418.620.221.322.923.825.126.027.228.029.2

18.017.917.717.517.417.217.116.916.716.316.215.915.815.615.514.913.812.511.710.710.19.3

G 4

RC 20º Tilt 40º Tilt

W R W


360º ROTATION

Jib

Short jib: Option

Short jib: Option

Overfront

360˚ OverRear

Approx.10˚

Approx.10˚

WARNING AND OPERATING INSTRUCTIONSFOR ON RUBBER LIFTING CAPACITIES

1. Rated lifting capacities on-rubber do not exceed 75% of tipping loads as determined by SAE J765-Crane Stability Test Code.

2. On rubber lifting is only permitted without couterweight and stationary. Creep operation is prohibited.Rated lifting capacities shown in the chart are based on the condition that crane is set on �rm level surfaces with suspension lock applied. Those above thick lines are based on tire capacity and those below, on crane stability. They are based on actual load radius increased by tire deformation and boom de�ection.

3. If the suspension lock cylinders contain air, the axle will not be locked completely and rated lifting capacities may not be obtainable. Bleed the cylinders according to the operation safety and maintenance manual.

4. Rated lifting capacities are based on proper tire in�ation, capacity and condition. Damaged tires are hazardous to safe operation of crane.

5. Tires shall be in�ated to correct air pressure.

6. Over front operation shall be performed within 10 degrees in front of chassis.

7. On rubber lifting with "jib" is not permitted. Maximum permissible boom length is 21.8 m (71.6').

8. When making lift on rubber stationary, set parking brake.9. The mass of the hook (1,080 kg (2,381 lbs) for 100 metric ton

(110 ton) capacity, 300 kg (661 lbs) for 7.2 metric ton (7.9 ton) capacity), slings and all similarly used load handling devices must be considered as part of the load and must be deducted from the lifting capacities.

10. For rated lifting capacity of single top, reduce the rated lifting capacities of relevant boom according to a weight reductions for auxiliary load handling equipment. Capacities of single top shall not exceed 7,200 kg (15,900 lbs) including main hook.

11. The lifting capacity data stowed in the LOAD MOMENT INDICATOR (AML-C) is based on the standard number of parts of line listed in the chart. Standard number of parts of line for on rubber operation should be according to the following table.

Tires26.5R25☆☆☆

Air Pressure650 kPa (94 psi)

GR-1600XL RATED LIFTING CAPACITIES (IN METRIC TON)

WITHOUT COUNTERWEIGHT ON-RUBBER STATIONARYA

B

2.503.003.504.004.505.005.506.006.507.007.508.009.00

10.0011.0012.00

73716866636158555249464335

000004

0000454

0000

904

000004

0000

454

0000904

10.010.010.010.010.09.28.06.95.95.14.33.31.8

10.010.010.010.010.010.09.58.47.46.55.85.13.72.41.5

10.010.010.010.010.010.010.09.18.17.46.65.94.63.42.41.7

A: Boom length (m)B: Load radius (m)C: Loaded boom angle (º)D: Minimum boom angle (º)

for indicated length (no load)E: Number of parts of line

Telescoping conditions (%)

C (42.8')13.1 m

Over front and rear 360º Rotation

17.4 m 21.8 m

0 40 50 47 56 59

(57.2') (42.8')13.1 m 17.4 m 21.8 m

(57.2')(71.6')787674727169676563615957534944

D

Tele. 1Tele. 2Tele. 3Tele. 4Tele. 5

E

C80797876757472716968676562595652

737168666361585552

10.010.09.98.06.45.14.03.02.1

10.010.010.09.78.16.85.74.73.93.12.41.7

10.010.010.010.0

9.07.76.65.64.84.13.32.71.7

(71.6')787674727169676563615957

80797876757472716968676562

C C C C

Boom length13.1 m (42.8') to 21.8 m (71.6')

Number of parts of line4

NOTE: The lifting capacity data stowed in the LOAD MOMENT INDICATOR (AML-C) is based on the standard number of parts of line listed in the chart.Standard number of parts of line for on-rubber operation should be according to the chart.

-15-


WARNING AND OPERATING INSTRUCTIONSFOR LIFTING CAPACITIES

GENERALRATED LIFTING CAPACITIES apply only to the machine as originally manufactured and normally equipped by TADANO LTD. Modi�cations to the machine or use of optional equipment other than that speci�ed can result in a reduction of capacity.Hydraulic cranes can be hazardous if improperly operated or maintained. Operation and maintenance of this machine must be in compliance with information in the Operation and Maintenance Manual supplied with the crane. If this manual is missing, order a replacement through the distributor.The operator and other personnel associated with this machine shall fully acquaint themselves with the latest applicable ASME B30.5 safety standards for cranes as mentioned in OSHA CFR29 part 1926.

SET UPRated lifting capacities on the load chart are the maximum allowable crane capacities, are based on the machine standing level on �rm supporting surface under ideal job conditions. Depending on the nature of the supporting surface, it may be necessary to have structural supports under the outrigger �oats or tires to spread the loads to a larger surface.For outrigger operation, outriggers shall be properly extended with tires free of supporting surface before operating crane.

OPERATIONRated lifting capacities have been tested to and meet minimum requirements of SAE J1063-Cantilevered Boom Crane Structures Method of Test.Rated lifting capacities do not exceed 85% of the tipping load on outriggers fully extended as determined by SAE J765-Crane Stability Test Code.Rated lifting capacities for partially extended outriggers are determined from the formula, Rated Lifting Capacities=(Tipping Load - 0.1 x Tip Reaction)/1.25.Rated lifting capacities above thick lines in the chart are based on crane strength and those below, on its stability. They are based on actual load radius increased by boom de�ection.The weight of handling device such as hook blocks, slings, etc., must be considered as part of the load and must be deducted from the lifting capacities.Rated lifting capacities are based on freely suspended loads and make no allowance for such factors as the effect of wind, sudden stopping of loads, supporting surface conditions, in�ation of tires, operating speeds, side loads, etc. Side pull on the boom or jib is extremely dangerous.Such action can damage the boom, jib or slewing mechanism, and lead to overturning the crane.Rated lifting capacities do not account for wind on lifted load or boom. We recommend against working under the conditions that the load is out of control due to a strong wind.During boom lift, consider that the rated lifting capacity is reduced by 50% when the wind speed is 9 m/s (20 mph) to 12 m/s (27 mph); reduced by 70% when the wind speed is 12 m/s (27 mph) to 14 m/s (31 mph). If the wind speed is 14 m/s (31 mph) or over, stop operation. During jib lift, stop operation if the wind speed is 9 m/s (20 mph) or over.

Rated lifting capacities at load radius shall not be exceeded. Do not tip the crane to determine allowable loads.Do not operate at boom lengths, radii, or boom angle, where no capacities are shown. Crane may overturn without any load on the hook.When boom length is between values listed, refer to the rated lifting capacities of the next longer and next shorter booms for the same radius. The lesser of the two rated lifting capacities shall be used.When making lifts at a load radius not shown, use the next longer radius to determine allowable capacity.Load per line should not exceed 7,200 kg (15,900 lbs) for main winch and auxiliary winch.Check the actual number of parts of line with LOAD MOMENT INDICATOR (AML-C) before operation. Maximum lifting capacity is restricted by the number of parts of line of LOAD MOMENT INDICATOR (AML-C). Limited capacity is as determined from the formula, Single line pull for main winch 7,200 kg (15,900 lbs) x number of parts of line.The boom angle before loading should be greater to account for de�ection. For rated lifting capacities, the loaded boom angle and the load radius is for reference only.Do not operate extension or retraction of the boom with loads.For lifting capacity of single top, deduct the weight of the load handling equipment from the rated lifting capacity of the boom.For the lifting capacity of single top, the net capacity shall not exceed 7,200 kg (15,900 lbs) including main boom hook mass attached to the boom.When the base jib or top jib or both jibs are removed, set the jib state switch to the REMOVED position.When erecting and stowing jib, be sure to retain it by hand or by other means to prevent its free movement.Use "ANTI-TWO-BLOCK DEVICE" disable switch when erecting and stowing jib and when stowing hook block. While the switch is pushed, the winch does not stop, even when overwind condition occurs.For selected boom length or less with jib, rated lifting capacities are determined by loaded boom angle only in the column headed "selected boom + jib".Outriggers shall be extended 8.2 m (26' 10-7/8") spread when installing or removing removable counterweight.

DEFINITIONSLoad Radius: Horizontal distance from a projection of the axis of rotation to supporting surface before loading to the center of the vertical winch line or tackle with load applied.Loaded Boom Angle: The angle between the boom base section and the horizontal, after lifting the rated lifting capacity at the load radius.Working Area: Area measured in a circular arc about the centerline of rotation.Freely Suspended Load: Load hanging free with no direct external force applied except by the winch line.Side Load: Horizontal side force applied to the lifted load either on the ground or in the air.

1.

2.

3.

1.

2.

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.15.

16.

17.

18.

19.

20.

1.

2.

3.

4.

5.

-16-


WARNING AND OPERATING INSTRUCTIONS FOR USING THE LOAD MOMENT INDICATOR (AML-C)

GR-1600XL Axle weight distribution chart

GVW

Kilograms

1st 2nd

Basic machine

Hydrauric offset jib

Remove: 1. 7.2 metric ton (7.9 ton) hook block2. 100 metric ton (110 ton) hook block3. Counterweight 11,100 kg (24,500 lbs)4. Counterweight 18,200 kg (40,100 lbs)5. Front and rear outrigger boxes and beams 6. Auxiliary Winch & wire rope7. Boom and Jib

-300-1,080

-11,120-18,160-8,962-1,202

-17,424

-421-1,7713,3515,473

-3,463490

-22,543

61346

-7,236-11,816-2,750

-8462,559

91,154 29,398 30,640

3nd

61346

-7,236-11,816-2,750

-8462,559

31,116

GVW

Pounds

1st 2nd

-661-2,381

-24,515-40,036-19,758-2,650

-38,413

-928-3,9047,388

12,066-7,6351,080

-49,699

134763

-15,953-26,050-6,063-1,8655,642

200,960 64,812 67,550

3nd

134763

-15,953-26,050-6,063-1,8655,642

68,599

Set AML select keys in accordance with the actually operating crane conditions and don't fail to make sure, before crane operation, that the displays on front panel are correct.When operating crane on outriggers:

• Set P.T.O. switch to "ON".• Press the outrigger state select key to register for the

outrigger operation. If the display agrees with the actual state, press the set key to register. After the completion of the registration, the pop-up window closes.

• Press the lift state select key to register the lift state to be used (single top / jib / boom).

• Each time the lift state select key is pressed, the display changes. If the display agrees with the autual state, press the set key to register. After the completion of the registration, the pop-up window closes.

• When erecting and stowing jib, select the status of jib set (Jib lift indicator symbol �ickers).

When operating crane on rubber:• Set P.T.O. switch to "ON".• Press the outrigger state select key to register for the on

rubber operation. Each time the outrigger state select key is pressed, the display changes. Select the stationary operation, the on rubber state indicative symbol �ickers.

• Press the lift state select key to register the lift state.However, pay attention to the following.For stationary operation.

• The front and rear capacities are attainable only when the over front or rear position. The front capacities are attainable only when the over front position symbol comes on. When the boom is more than 2 degrees from centered over front of chassis, 360º capacities are in effect.

• When a load is lifted in the front or rear position and then swung to the side area, make sure the value of the LOAD

MOMENT INDICATOR (AML-C) is below the 360º lifting capacity.This machine is equipped with an automatic slewing stop device. (For the details, see Operation and Maintenance Manual.) But, operate very carefully because the automatic slewing stop does not work in the following case.

• During on-rubber operation.• When the "P.T.O" switch is set to "OVERRIDE" and the

"OVERRIDE" key switch outside the cab is on.During crane operation, make sure that the displays on front panel are in accordance with actual operating conditions.The displayed values of LOAD MOMENT INDICATOR (AML-C) are based on freely suspended loads and make no allowance for such factors as the effect of wind, sudden stopping of loads, supporting surface conditions, in�ation of tire, operating speed, side loads, etc.For safe operation, it is recommended when extending and lowering boom or slewing, lifting loads shall be appropriately reduced.LOAD MOMENT INDICATOR (AML-C) is intended as an aid to the operator. Under no condition should it be relied upon to replace use of capacity charts and operating instruction. Sole reliance upon LOAD MOMENT INDICATOR (AML-C) aids in place of good operating practice can cause an accident. The operator must exercise caution to assure safety.

1.

2.

3.

4.

5.

6.

7.


-17-

4-12, Kamezawa 2-chome,Sumida-ku, Tokyo 130-0014, Japan

Tel : +81-(0)3-3621-7750Fax: +81-(0)3-3621-7785

http://www.tadano.com/[email protected] Printed in Japan

2016-5-1E-mail

URL

(International Sales Division)

gr-1600xl - tadano · 2020. 2. 5. · switch, outrigger controls, free swing / lock swing selector...

Documents