gps accessoryguide 20120928
TRANSCRIPT
-
5/20/2018 GPS AccessoryGuide 20120928
1/14
Date Code 20120928 Accessory Guide SEL Satellite-Synchronized Clock
GPS Clock Features and Benefits ReliableExceed IEEE and IEC Relay Standards. Apply in harsh substation environments.
Exceed IEEE C37.90 and IEC 60255 protective relay standards. Accurate operation from 40 to+80 C.
Accurate. Apply for synchrophasor, relay event correlation, and other high-accuracy timing needs.Demodulated IRIG-B time code outputs with 100 ns accuracy meet requirements for existing andfuture timing applications.
SEL-2407Satellite-Synchronized Clock SEL-2404 Satellite-Synchronized Clock
Universal power supply operates from 18300 Vdcand 85264 Vac.
Provides six demodulated IRIG-B time-code out-puts. Three of the six outputs are user-selectable for1 PPS or 1kPPS output.
See time from 200 feet away, even in direct sunlight,with bright, easy-to-read, three-inch LED digits.
Provides four demodulated IRIG-B outputs.
SEL-2401 Satellite-Synchronized Clock SEL-3401 Digital Clock Display
Connect to a satellite-synchronized clock for a high-accuracy time display.
Accepts IRIG-B time-code input.
Outputs IRIG-B through either a single RJ45 con-nector (surface mount) or four BNC connectors(rack mount).
Ideal for small substations or situations where ahigh-quality time signal is required.
Provides a single demodulated IRIG-B output.
SEL Satellite-Synchronized ClocksAccessory Guide
-
5/20/2018 GPS AccessoryGuide 20120928
2/14
2
SEL Satellite-Synchronized Clocks Accessory Guide Date Code 20120928
Powering the GPS Clocks
Powering the GPS Clocks
SEL-9321 Low-VoltageDC Power Supply
Figure 1 SEL-9321 Low-Voltage DC Power Supply
The SEL-9321 is for use with the SEL-2401 +5 Vdc terminal only.
Wall Power Adapter
Figure 2 Wall Power Adapter for Use With the SEL-2401 and SEL-3401(SEL Part Number 230-0604)
Table 1 Low-Voltage DC Power Supply Configuration
SEL Part Number Description
SEL-932130X Low-voltage dc power supply; 48/125 Vdc or 125 Vac
SEL-932160X Low-voltage dc power supply; 125/250 Vdc or Vac
Table 2 Wall Power Adapter
SEL Part Number Description
230-0604 15 Vdc power supply, 120240 Vac input, tinned leads
240-1654 International plug adapter kit (UK, EU, AUS)
-
5/20/2018 GPS AccessoryGuide 20120928
3/14
3
Date Code 20120928 Accessory Guide SEL Satellite-Synchronized Clock
GPS Signal-Acquisition Accessories
GPS Signal-Acquisition Accessories
Antennas
Figure 3 Low-Profile GPS Antenna 5 V, 33 dB Gain(SEL Part Number 235-0209)
Figure 4 Low-Profile GPS Antenna Dimensions
-
5/20/2018 GPS AccessoryGuide 20120928
4/14
4
SEL Satellite-Synchronized Clocks Accessory Guide Date Code 20120928
GPS Signal-Acquisition Accessories
Figure 5 Low-Profile GPS Antenna Mounting (SEL Part Number
915900044)
Figure 6 Low-Profile Antenna Mounting Dimensions
-
5/20/2018 GPS AccessoryGuide 20120928
5/14
5
Date Code 20120928 Accessory Guide SEL Satellite-Synchronized Clock
GPS Signal-Acquisition Accessories
Figure 7 Low-Profile Antenna Mounting Assembly
Figure 8 Bullet GPS Antenna, 5 V, 40 dB Gain (SEL Part Number 235-0113)Sat. Antenna 1
Item Part Number Description QTY.
1 190-2984 BRACKET, ANTENNA MOUNT 1
2 235-0209 GPS, ANTENNA, 5V, 33 dB 1
w
q
-
5/20/2018 GPS AccessoryGuide 20120928
6/14
6
SEL Satellite-Synchronized Clocks Accessory Guide Date Code 20120928
GPS Signal-Acquisition Accessories
Figure 9 Bullet GPS Antenna Dimensions
Figure 10 Bullet Antenna Surface Mounting Assembly(SEL Part Number 915900043)
Item Part Number Description QTY.1 191-0100 MAST, POLE MOUNT 1
2 190-2984 BRACKET, ANTENNA MOUNT 1
3 190-2986 BRACKET, STEPPED, U-BOLT MOUNT 1
4 144-2002 U-BOLT, 1.75", SS 1
5 144-2002_Nut NUT, 1/4-20, 18-8 SS 2
q
t
r
ew
-
5/20/2018 GPS AccessoryGuide 20120928
7/14
7
Date Code 20120928 Accessory Guide SEL Satellite-Synchronized Clock
Coaxial Cable, Connectors, and Accessories
Figure 11 Bullet Antenna Pipe Mounting Assembly(SEL Part Number 915900043)
Coaxial Cable, Connectors, and Accessories
Figure 12 RG-6 Cable With TNC Connectors on Both Ends
q
t
r
u
y
e
w
Up to 2" pipePipe is not included in antennamounting kit
Item Part Number Description QTY.1 190-2984 BRACKET, ANTENNA MOUNT 12 191-0100 MAST, POLE MOUNT 13 190-2986 BRACKET, STEPPED, U-BOLT MOUNT 14 144-2002 U-BOLT, 1.75", SS 1
5 144-2002_Nut NUT, 1/4-20, 18-8 SS 26 pipe UP TO 2" PIPE 17 144-2004 CLAMP, WORM-DRIVE, PIPE, 3.125-6" 1
Table 3 Cables, Connectors, and Accessories
SEL Part Number Description
C960 RG-6 cable with TNC connectors on both ends (antenna to clock),
0.345 m (1150 feet) (Figure 12)
C961 Low-loss LMR 400UF cable with TNC connectors on both ends
(for longer antenna/clock separation), 92 m maximum (300 feet)
200-2005 Gas tube coaxial surge protector (Figure 13)
200-2006 Mounting bracket for surge protector (Figure 14)
-
5/20/2018 GPS AccessoryGuide 20120928
8/14
8
SEL Satellite-Synchronized Clocks Accessory Guide Date Code 20120928
Coaxial Cable, Connectors, and Accessories
Figure 13 Gas Tube Coaxial Surge Protector
Figure 14 Surge Protector Mounting Dimensions
-
5/20/2018 GPS AccessoryGuide 20120928
9/14
9
Date Code 20120928 Accessory Guide SEL Satellite-Synchronized Clock
Time-Distribution Accessories
Time-Distribution Accessories
Figure 15 RG-58 Cable With BNC Connectors on Both Ends
Figure 16 BNC Terminator, 50
Table 4 Coaxial Cable, Connectors, and Accessories
SEL Part Number Description
SEL-C953 RG-58 cable with BNC connectors on both endsa(Figure 15)
a. Demodulated output: 40 m (130 feet) maximum. Modulated output: 130 m (425 feet)
maximum.
SEL-C962 RG-58 cable with BNC connector to tinned wiresa
SEL-C963 RG-58 cable with tinned leads on both ends
240-1799 BNC Tee, Female, Male, Female (equipment mount)
240-1801 BNC Tee, Female, Female, Male (equipment mount)
240-1802 BNC Tee, Female, Female, Female (in-line cables, three-way
splice)
240-1800 BNC terminator, 50
915900036 Wire-lead terminator, 50
240-1850 BNC/TNC removal tool
-
5/20/2018 GPS AccessoryGuide 20120928
10/14
10
SEL Satellite-Synchronized Clocks Accessory Guide Date Code 20120928
Time-Distribution Accessories
Figure 17 Wire-Lead Terminator, 50
Figure 18 BNC Tee, F/M/F
Figure 19 BNC Tee, F/F/M
Figure 20 BNC Tee, F/F/F (Three-Way Splice)
-
5/20/2018 GPS AccessoryGuide 20120928
11/14
1
Date Code 20120928 Accessory Guide SEL Satellite-Synchronized Clock
Communications Accessories
Communications Accessories
SEL-C662 USB-to-Serial-Port Cables
Figure 21 SEL-C662 Cable
Connect to a PC USB port to communicate with an SEL-2401,
SEL-2404, or SEL-2407 GPS clock
Additional cable: SEL-C234A serial-to-serial
Fiber-Optic Cables
Figure 22 SEL-C807 or SEL-C808 62.5 m Multimode Fiber-Optic Cable
Improve safety and signal integrity
Use optical fiber instead of wire to protect personnel and
equipment, eliminate electromagnetic interference, and
increase reliability.
For use with the optional SEL-2407 fiber-optic port
Optical interface connector: ST
Optical protocol: SEL-2812 compatible
Order finished cables built to your length specifications
SEL-2407 Mounting Brackets
Figure 23 SEL-2407 With 1U Half-Rack Mounting Bracket (P1436)
-
5/20/2018 GPS AccessoryGuide 20120928
12/14
12
SEL Satellite-Synchronized Clocks Accessory Guide Date Code 20120928
SEL-9929 Satellite-Synchronized Clock Display Kit
Figure 24 1U Half-Rack Mounting Bracket Dimensions
SEL-9929 Satellite-Synchronized Clock Display Kit
This kit includes the following items:
SEL-3401 Digital Clock Display
SEL-2401 Satellite-Synchronized Clock (displays time in
12- or 24-hour format modes)
GPS Antenna
-
5/20/2018 GPS AccessoryGuide 20120928
13/14
1
Date Code 20120928 Accessory Guide SEL Satellite-Synchronized Clock
SEL-5860 Time Service Software
SEL-C960 Antenna Cable
SEL-C962 Coaxial Cable
Wall Power Adapters (2)
Antenna Mounting Bracket
SEL-5860 Time Service SoftwareFree of charge!
Connect the SEL-2407 or SEL-2404 to a PC and download the
SEL-5860 Time Service Software to provide the PC with the
accurate date and time
Assign the PC as a server providing Simple Network Time
Protocol (SNTP) to a connected network
Requires Windows2000 or later in the PC and firmware
version R106 or later when using the SEL-2407
-
5/20/2018 GPS AccessoryGuide 20120928
14/14
Date Code 20120928 Accessory Guide SEL Satellite-Synchronized Clock
2012 by Schweitzer Engineering Laboratories, Inc. All rights reserved.
All brand or product names appearing in this document are the trademark or registeredtrademark of their respective holders. No SEL trademarks may be used without writtenpermission. SEL products appearing in this document may be covered by U.S. and Foreignpatents.
Schweitzer Engineering Laboratories, Inc. reserves all rights and benefits afforded under
federal and international copyright and patent laws in its products, including without lim-itation software, firmware, and documentation.
The information in this document is provided for informational use only and is subject to
change without notice. Schweitzer Engineering Laboratories, Inc. has approved only theEnglish language document.
This product is covered by the standard SEL 10-year warranty. For warranty details, visitwww.selinc.com or contact your customer service representative. *PLS00073*
SCHWEITZER ENGINEERING LABORATORIES2350 NE Hopkins Court Pullman, WA 99163-5603 USA
Phone: +1.509.332.1890 Fax: +1.509.332.7990
Internet: www.selinc.com E-mail: [email protected]
Equipment components are sensitive to electrostatic discharge(ESD). Undetectable permanent damage can result if you do not useproper ESD procedures. Ground yourself, your work surface, andthis equipment before removing any cover from this equipment. Ifyour facility is not equipped to work with these components, contactSEL about returning this device and related SEL equipment forservice.
! CAUTION
Operator safety may be impaired if the device is used in a mannernot specified by SEL.
! WARNING
Les composants de cet quipement sont sensibles aux dchargeslectrostatiques (DES). Des dommages permanents non-dcelablespeuvent rsulter de labsence de prcautions contre les DES.Raccordez-vous correctement la terre, ainsi que la surface detravail et lappareil avant den retirer un panneau. Si vous ntes pasquips pour travailler avec ce type de composants, contacter SELafin de retourner lappareil pour un service en usine.
! ATTENTION
La scurit de loprateur peut tre compromise si lappareil estutilis dune faon non indique par SEL.
! AVERTISSEMENT
14 Notes
Notes