gprs remote terminal unit - usriot en_v1.0.pdfgprs remote terminal unit usr-pdu ... android and mac...
TRANSCRIPT
LonHand Series product user manual www.usr.so
Jinan USR IOT Technology Limited 1/12 [email protected]
GPRS Remote Terminal Unit
USR-PDU
File version: V1.0
LonHand Series product user manual www.usr.so
Jinan USR IOT Technology Limited 2/12 [email protected]
Content
GPRS Remote Terminal Unit ..................................................................................................1
Quick start ............................................................................................................................3
Product Description ...............................................................................................................8
Instruction .....................................................................................................................8
Features.........................................................................................................................9
Parameters .....................................................................................................................9
Packing list ....................................................................................................................9
USR-PDU application structure ...............................................................................................9
Configuration Introductions .................................................................................................. 10
Contact .............................................................................................................................. 11
Disclaimer .......................................................................................................................... 11
Update History .................................................................................................................... 12
LonHand Series product user manual www.usr.so
Jinan USR IOT Technology Limited 3/12 [email protected]
Quick start
1. Install SIM card.
Use a needle or similar tool to push the yellow spot on the right side of the SIM base, then SIM
cutting ferrule is open. SIM card should be put into the cutting ferrule. Ensure metal face upside,
push the cutting ferrule back. The antenna uses SMA female receptacle. Revolve the TNC male head
to antenna female receptacle, and ensure it is tightened, in case it affects the signal quality. The SIM
card should have GPRS flow.
2. Install LonHand software.
You can download LonHand software from official website
http://www.usr.so/Download/117.html, click on the floppy symbol then download LonHand
software. We supply back-end server and software on different platforms such as Windows, IOS,
Android and MAC system. Install it on your computer or your cell phone or your pad.
LonHand Series product user manual www.usr.so
Jinan USR IOT Technology Limited 4/12 [email protected]
IOS system users can download software from App store for free. Because there are few
differences of software interface between IOS system and Android system, we will illustrate
how to use it on iphone, as an reference to android system users.
LonHand software are green edition, if you do not need just delete its installation directory and
its shortcut icon(windows system).
3. Open LonHand software. Slide to the fourth page, click on start button.
4. There are three options at the bottom of interface: Devices, User, and More. Click on User, enter
user page. Register an account on our server, the account and password should be 4 to 8 bit
string, and they are case sensitive. Login your account, now we use my account as an example.
LonHand Series product user manual www.usr.so
Jinan USR IOT Technology Limited 5/12 [email protected]
5. Enter Devices page. Click the add button on the top right corner, popup a box as bellow.
6. Input the MAC address and serial number of USR-PDU, you can also scan QR code to add the
device when use an mobile phone with the scan function. Just click on the QR code symbol,
scan the label on the PDU. Click ok, add the device.
LonHand Series product user manual www.usr.so
Jinan USR IOT Technology Limited 6/12 [email protected]
7. Insert the plug of the USR-PDU into the power socket. Wait for a moment, the internal GPRS
module starts to work and connects to server. The Led will turn blue after it has built connection
with server. And on your phone the remote control symbol turn blue.
8. Click on its name enter Source Control page. In this page you are able to control the output,
click on the button on right side, the button change blue and the output is enabled. Click it again,
the button change glue and the output is disabled.
LonHand Series product user manual www.usr.so
Jinan USR IOT Technology Limited 7/12 [email protected]
9. Click lock button , users can lock the state of output. You can’t control the output after you
lock the output state. This is very useful for preventing mistake operation. Click the lock button
again, the output is unlocked, users can control the output again.
10. Users can implement timing tasks. Click on timer button , pop up timer task page, click
on the add button on top right corner, pop timer setting dialog box. You can set up to 5 timing
tasks.
LonHand Series product user manual www.usr.so
Jinan USR IOT Technology Limited 8/12 [email protected]
11. If you use a computer to add USR-PDU, when you want to control it by phone
remotely, just get activated devices, then you can control. If you have changed the
picture or name of the device, you need save activated devices.
Product Description
Instruction
USR-PDU is a device used to monitor and control devices through the mobile phone operator's
network, with data transmission using GPRS. The device will automatically connect to the server
supplied by our company. You can use LonHand software on different platforms such as Windows,
Android, IOS, MAC system for remote control.
LonHand Series product user manual www.usr.so
Jinan USR IOT Technology Limited 9/12 [email protected]
Features
As an wireless control power distribution unit, USR-PDU has advantages as follow:
Four frequencies for all countries
Easy to use, no need to configure
Support GPRS/GSM network, do not support CDMA/EDEG/3G
One relay controls output
Use MD251 industrial module
Use single module embedded protocol stack, no external CPU, higher stability
Embedded TCP/IP protocol stack and GPRS technology
Support remote parameters settings, can close the output by SMS
Support public and APN network access
Register an account, do remote observation and control using software anywhere at anytime
Matched sucker antenna, convenient for customers install and use.
Parameters
Dimension: 485*44*44mm(L*W*H)
Working Voltage: AC 220V/50HZ 110V/60HZ
Output Current:10A
Max power: 2500W
Working temperature: -40~80Celsius
Storage temperature: -40~80Celsius
Storage humidity: 5%~95%RH
Working Frequency: 850/900/1800/1900MHZ
Support LonHand system ( Windows/MAC/IOS/Android/HTML 5 web control)
Support change output port state via SMS, support SMS password authentication
Packing list
1. USR-PDU * 1 (with plastic shell)
2. GPRS antenna (SMA Interface)
USR-PDU application structure
USR-PDU are easy to use, users do not need any configuration to access our public servers.
LonHand Series product user manual www.usr.so
Jinan USR IOT Technology Limited 10/12 [email protected]
Configuration Introductions
USR-PDU supports configuration via SMS, such as APN and device password, supports changing
the output state through SMS to control equipment and supports SMS password authentication.
Format:
PSW,CMD
PSW - Password, device will execute command when the message begins with the correct password.
The password does not exceed 5 characters in length, case sensitive, default as admin.
CMD – Control command.
Such as: admin, SETOUT1, means the output is set to the ON state.
Command for set APN account:
AT+CSTT=”APN”,”NAME”,”PSW”
APN: APN account
NAME: User name
PSW: APN password
Above items is provided by local operators.
Command for set device password:
LonHand Series product user manual www.usr.so
Jinan USR IOT Technology Limited 11/12 [email protected]
AT+CIPSW=PSW
PSW: Device password; If need control device by SMS after modifying the password, you should
use the new password. Setting will fail if the password beyond five characters
Control Command
set output as ON:
SETOUT1 return:SETOUT1 OK
set output as OFF:
RESETOUT1 return:RESETOUT1 OK
Example for SMS controlling:
Contact
Company: Jinan USR IOT Technology Limited
Address: 1-728, Huizhan Guoji Cheng, Gaoxin Qu, Jinan, Shandong, China
Tel: 86-531-55507297, 86-531-88826739
Web: www.usr.so
Email: [email protected], [email protected]
Disclaimer
This document provides information about USR-PDU, this document does not grant any license to
intellectual property rights. Except the responsibility declared in the product sale clause, USR does
not assume any other responsibilities. In addition, USR does not make any warranties for the sale
and use of this product, including the suitability of the product for a particular purpose,
LonHand Series product user manual www.usr.so
Jinan USR IOT Technology Limited 12/12 [email protected]
merchantability or fitness for any patent, copyright or other intellectual property infringement, etc.
USR may make changes to specifications and product descriptions without notice.
Update History
V1.0 2014-07-18 First edition publish