gp000004

8/7/2019 GP000004

http://slidepdf.com/reader/full/gp000004 1/11

Source Reference Addresses

GP 00-00-04

Version 1

March 2002

Scope

[I] The full names, acronyms, and addresses of technical society and trade association codes,standards and specifications along with other documents which are cited as references in the Global

Practices (GPs) are listed herein.

If the required standard is not available from your local information center, it may be obtained fromthe issuing agency or from:

Global Engineering Documents

15 Inverness Way, EastEnglewood, CO 80112

Phone: (800) 854-7179Fax: (303) 397-2740

or

Information Center

ExxonMobil Research and Engineering Co.

1545 Route 22 East, Clinton Township

Annandale, NJ 08801Phone: (908) 730-2755

Fax: (908) 730-2756

8/7/2019 GP000004


GP 00-00-04 Source Reference Addresses March 2002

All Business Sectors ExxonMobil Development Company of 11

For ExxonMobil Use Only Version 1

Standards Organizations

Acronym Organization

ABMA American Bearing Manufacturing Association (AFBMA)2025 M Street, NW, Suite 800

Washington, D.C. 20036-2422Phone: (202) 367-1155

Fax: (202) 367-2155

ACGIH American Conference of Governmental

Industrial Hygienists

1330 Kemper Meadow DriveCincinnati, Ohio 45240

Phone: (513) 742-2020Fax: (513) 742-3355

ACI American Concrete Institute

38800 Country Club DriveP.O. Box 9094

Farmington Hills, Michigan 48333

Phone: (248) 848-3700Fax: (248) 848-3701

AEIC Association of Edison Illuminating Cos.

P.O. Box 2641Birmingham, Alabama 35291-0992

Phone: (205) 257-2530

Fax: (205) 257-2540

AFIAP French Institute of Pressure Vessel EngineersMaison de la Mecanique

39-41 Louis Blanc92400 Courbevoie, France

Phone: 33-1-47-17-62-73

Fax: 33-1-47-17-62-77

AFNOR Association Francaise de Normalization 11, avenue Francis de Pressense

93571 Saint-Denis la Plaine Cedex

Paris, FrancePhone: 33-1-41-62-80-00

Fax: 33-1-49-17-90-00

AGMA American Gear Manufacturers Association 1500 King Street, Suite 201

Alexandria, Virginia 22314

Phone: (703) 684-0211Fax: (703) 684-0242

8/7/2019 GP000004






AISC American Institute of Steel Construction

1 East Wacker Drive, Suite 3100Chicago, Illinois 60601

Phone: (312) 670-2400

Fax: (312) 670-5403ALPEMA Aluminum Plate-Fin Heat Exchanger Manufacturer’s Association

29 Clevelands

Abingdon, Oxfordshire, OX14 2EQ, United Kingdom

Phone: 44-1235-525-955

Fax: 44-1235-200-906

AMCA Air Movement and Control Association 30 W. University Drive

Arlington Heights, Illinois 60004

Phone: (708) 394-0150

Fax: (708) 253-0088

ANSI American National Standards Institute, Inc.

25 West 43rd Street, 4th Floor New York, New York 10036

Phone: (212) 642-4900

Fax: (212) 398-0023

API American Petroleum Institute

Global Engineering Documents

15 Inverness Way East

Englewood, Colorado 80112-5776Phone: (800) 854-7179

Fax: (303) 397-2740

ASCE American Society of Civil Engineers

1801 Alexander Bell DriveReston, Virginia 20191-4400Phone: (800) 548 2723; (703) 295-6300

Fax: (703) 295-6222

ASHRAE American Society of Heating, Refrigeration and Air Conditioning Engineers 1791 Tullie Circle NE

Atlanta, Georgia 30329-2305

Phone: (404) 636-8400Fax: (404) 321-5478

ASME American Society of Mechanical Engineers 22 Low Drive, Box 2300

Fairfield, New Jersey 07007-2300

Phone: (973) 882-1167Fax: (973) 882-1717

ASQ American Society for Quality 600 North Plankinton Avenue

Milwaukee, Wisconsin 53203-3005Phone: (800) 248-1946; (414) 272-8575

Fax: (414) 272-1734

ASTM American Society for Testing and Materials

8/7/2019 GP000004






100 Barr Harbor Drive

West Conshohocken, Pennsylvania 19428-2959Phone: (610) 832-9585

Fax: (610) 832-9555

AWPA American Wood-Preservers' AssociationP.O. Box 5690

Granbury, Texas 76049-0690

Phone: (817) 326-6300

Fax: (817) 326-6306

AWS American Welding Society Inc. 550 NW LeJeunne Road

Miami, Florida 33135Phone: (800) 443-9353

Fax: (305) 443-7559Publications Phone: (800) 334-9353

AWWA American Water Works Association

6666 West Quincy AvenueDenver, Colorado 80235

Phone: (303) 794-7711

Fax: (303) 794-7310

BSI British Standards Institution 12110 Sunset Hills Road, Suite 140

Reston, Virginia 20190

Phone: (800) 862-4977; (703) 437-9000Fax: (703) 437-9001

CENELEC European Committee for Electrotechnical Standardization 35 Rue de Stassart

B-1050, Brussels, Belgium

Phone: 32-2-519-6871Fax: 32-2-519-6919

CEMA Conveyor Equipment Manufacturers Assn.

6724 Lone Oak Blvd. Naples, Florida 34109

Phone: (941) 514-3441

Fax: (941) 514-3470

CFR Code of Federal Regulations National Archives and Records Administration700 Pennsylvania Avenue, N.W.

Washington, D.C. 20408

Phone: (800) 234-8861CHI Chlorine Institute

2001 L Street NW No. 506


Phone: (202) 775-2790Fax: (202) 223-7225

CICIND International Committee on Industrial Chimneys

(Comite International Des Chimne’es Industrielle) Mr. J. Roberts, Secretary

8/7/2019 GP000004






Perran House, Barnaby Mead

Gillingham, Dorset SP8 4AL, United KingdomPhone: 44-1747-82-1315

Fax: 44-1747-82-1315

CSA Canadian Standards Association 178 Rexdale Boulevard

Etobicoke (Toronto)

Ontario, Canada M9W 1R3

Phone: (416) 747-4000(800) 463-6727

CSI Construction Specifications Institute

99 Canal Center Plaza, Suite 300Alexandria, Virginia 22314

Phone: (800) 689-2900; (703) 684-0300Fax: (703) 684-0465

CTI Cooling Tower Institute

530 Wells Fargo Drive, Suite 218Houston, Texas 77090

Phone: (281) 583-4087

Fax: (281) 537-1721

DIN Din Deutsches Institut fur Normung E.V.

Burggrafenstr. 6

D-10787 Berlin, Germany

Phone: 49-30-2601-0Fax: 49-30-2601-1231

EBSI ExxonMobil Biomedical Sciences, Inc.

Mettlers Road CN 2350

East Millstone, New Jersey 08875-2350

Phone: (732) 873-6091

EEMUA Engineering Equipment and Materials Users Association

45 Beech Street

London, EC2Y 8AD, United Kingdom(OCMA Specifications available from EEMUA)

Phone: 44-20-7628-7878

Fax: 44-20-7628-7862

EJMA Expansion Joint Manufacturers Association

25 N. BroadwayTarrytown, New York 10591-3201

Phone: (914) 332-0040

Fax: (914) 332-1541ERA ERA (Electric Research Association) Technology, Ltd.

Clive Road

Leatherhead, Surrey, KT227SA, United Kingdom

Phone: 44-1372-36-7000Fax: 44-1372-36-7091

FSA Fluid Sealing Association

994 Old Eagle School RoadSuite 1019

8/7/2019 GP000004






Wayne, Pennsylvania 19087

Phone: (610) 971-4850Fax: (610) 971-4859

HI Hydraulic Institute

9 Sylvan WayParsippany, New Jersey 07054-3802

Phone: (973) 267-9700

Fax: (973) 267-9055

HSE Health and Safety Executive

St. Dunstans House

201-211 Borough High Street

London SE1 1GZ, United KingdomPhone: 44-20-7556-2100

Fax: 44-20-7556-2200

IBN Institute Belge de Normalization Avenue de la Brabanconne, 29

1000 Bruxelles, BelgiumPhone: 32-2-738-01-05

Fax: 32-2-733-42-64

ICBO International Conference of Building Officials

5360 South Workman Mill Road

Whittier, California 90610

(Uniform Building Code available from ICBO)

Phone: (310) 699-0541Fax: (310) 692-3854

IEC International Electrotechnical Commission

Publications available from

National Standards Organizations

(ANSI, BSI, VDE-VERLAG, etc.)

ICEA Insulated Cable Engineers Association

P.O. Box 1568

Carrollton, Georgia 30117Phone: (770) 830-0369

Fax: (770) 830-8501

IEEE Institute of Electrical and Electronics Engineers, Inc. 445 Hoes Lane, P.O. Box 1331

Piscataway, New Jersey 08855-1331Phone: (732) 981-0060

Fax: (732) 981-1721

ISA International Society for Measurement and Control(previously Instrument Society of America) P.O. Box 12277

Research Triangle Park, North Carolina 27709

Phone: (919) 549-8411Fax: (919) 549-8288

ISO International Organization for Standardization

1, rue de Varembe, Case postale 56CH-1211 Geneva 20, Switzerland

8/7/2019 GP000004






Phone: 41-22-749-01-11

Fax: 41-22-733-34-30

JIS Japanese Industrial Standards

1-24, Akasaka 4, Minatoku

Tokyo, Japan 107-8440Phone: 81-3-3583-8000

Fax: 81-3-3586-2014

MIL STD Military Standard (USA) Commanding Officer

Naval Publications and Forms Center

5801 Tabor Avenue

Philadelphia, Pennsylvania 19120

MPTA Mechanical Power Transmission Association 6724 Lone Oak Blvd.

Naples, Florida 34109Phone: (941) 514-3441

Fax: (941) 514-3470

MSS Manufacturers Standardization Society of the Valve and Fittings Industry 127 Park Street, NE

Vienna, Virginia 22180Phone: (703) 281-6613

Fax: (703) 281-6671

NACE National Association of Corrosion Engineers Intl. 1440 South Creek Drive

Houston, Texas 77084-4906

Phone: (281) 228-6200Fax: (281) 228-6300

NEMA National Electrical Manufacturers Association 1300 N. 17th StreetRoslyn, Virginia 22209

Phone: (702) 841-3200

Fax: (702) 841-3300

NETA InterNational Electrical Testing Association

P.O. Box 687, 106 Stone Street

Morrison, Colorado 80465Phone: (303) 697-8441

Fax: (303) 697-8431

NFPA National Fire Protection Association One Batterymarch Park

P.O. Box 9101Quincy, Massachusetts 02269-9101

Phone: (617) 770-3000

Fax: (617) 770-0700

NIS National Institute of Standards

100 Bureau Drive MS 2100

Gaithersburg, MD 20899-2100

Phone: (301) 975-4000

8/7/2019 GP000004


8/7/2019 GP000004






TEMA Tubular Exchanger Manufacturers Association

25 North BroadwayTarrytown, New York 10591

Phone: (914) 332-0040

Fax: (914) 332-1541UL Underwriters Laboratories, Inc.

Comm 2000

1418 Brook Drive

Downer’s Grove, Illinois 60515

Phone: (800) 853-3503Fax: (800) 853-3512

UNI Ente Nazionale Italiano Di Unificazione

Sede di Milano/ Milan Headquarters

via Battistotti Sassi 11/b

20133 Milano, ItalyPhone: 39-2-70024-1

Fax: 39-2-70106-106

USDI United States Department of the Interior 1849 C Street, N.W.


Phone: (202) 208-3100

VDE Verband Deutscher Elektrotechniker

VDE - VERLAG, GmbH

Bismarckstr 33Berlin, D-10625, Germany

VPS Voluntary Product Standard

Standards Management Program (NIST)

Gaithersburg, Michigan 20899Phone: (301) 975-4025Fax: (301) 963-2871

WP Witherby Publishers

32-36 Aylesbury StreetLondon, EC1R 0ET, United Kingdom

Phone: 44 20 7251 5341

Fax: 44 20 7251 1296

[I] ANSI: Documents listed in the Global Practices which are identified by the sponsor's designation preceded by the organization's acronym and ANSI are also available from ANSI (example,

ANSI/AWWA C 106). In most cases, such documents are also available from national standards

organizations (BSI, DIN, JIS, etc.).

8/7/2019 GP000004





Record of Change

Common

Version 1 Date: 3/02

Location Action Description

8/7/2019 GP000004





Attachment: Purpose Codes Definitions

Code Description

C Assigned to paragraphs containing specifications whose primary purpose is reduced costs.Reduced cost in this context refers to initial investment cost and does not include Life-Cycle cost

considerations. Life-Cycle cost considerations are captured under reliability, maintainability, or

operability purpose codes.

E Assigned to paragraphs containing specifications whose primary purpose is driven by

environmental considerations. Environmental considerations typically include specificationsintended to protect against emissions/leakage to the air, water, and/or soil. Deviations from the

specifications contained in such paragraphs require formal review and approval according to

local environmental policy.

I Assigned to paragraphs that provide only clarifying information such as Scope statements,

definitions of terms, etc.

M Assigned to paragraphs containing specifications whose primary purpose is to provide for maintainability of equipment or systems. Maintainability provisions are those that facilitate the

performance of maintenance on equipment/systems either during downtimes or during on-stream

operations.

O Assigned to paragraphs containing specifications whose primary purpose is to assure operability

of equipment or systems. Operability is the ability of the equipment/system to performsatisfactorily even though conditions are off-design, such as during startups, process swings,

subcomponent malfunction, etc.

R Assigned to paragraphs containing specifications whose primary purpose is to improve or assure

the reliability of equipment or systems. Reliability is a measure of the ability of

equipment/systems to operate without malfunction or failure between planned maintenanceinterventions.

S Assigned to paragraphs containing specifications whose primary purpose is avoidance of

personnel or operational safety incidents. Any deviation from the specifications contained insuch designated paragraphs requires formal review and approval according to local safety policy.

Personnel Safety: Refers to the avoidance of recordable personnel injuries; i.e., burns, cuts,abrasions, inhalation, or exposure to dangerous substances, etc., that could

result in medical treatment, restricted work, lost-time incidents, or

fatalities.

Operational Safety: Refers to the prevention and control of process releases, fires, explosions,etc.