gp percussion dp778tn double bass pedal assembly … · step 1 — gp percussion dp778tn double...

6
GP Percussion DP778TN Double Bass Pedal Assembly Technique Assemble and install GP Percussion's double bass pedal into a drumkit. Written By: James Pearson Hughes GP Percussion DP778TN Double Bass Pedal Assembly Technique © iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 6

Upload: vohuong

Post on 19-Jul-2018

235 views

Category:

Documents


4 download

TRANSCRIPT

GP Percussion DP778TN Double Bass PedalAssembly Technique

Assemble and install GP Percussion's double bass pedal into a drumkit.

Written By: James Pearson Hughes

GP Percussion DP778TN Double Bass Pedal Assembly Technique

© iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 6

Step 1 — GP Percussion DP778TN Double Bass Pedal Assembly Technique

Lay everything out

Step 2

Remove the drum key and Allen wrenches from the right side of the primary pedal.

GP Percussion DP778TN Double Bass Pedal Assembly Technique

© iFixit — CC BY-NC-SA www.iFixit.com Page 2 of 6

Step 3

Slide the ends of the long black connector onto the sides of the pedals.

Both sides of the connection are shaped like a half-circle, so they can only connect in the properorientation.

Ensure all the screws on the connector are pointing up. To do so, you will need to "wind" thesecondary pedal up manually before attaching the connector.

GP Percussion DP778TN Double Bass Pedal Assembly Technique

© iFixit — CC BY-NC-SA www.iFixit.com Page 3 of 6

Step 4

Insert the beaters into the primary pedal.

You can choose to use either side of the beaters - just be consistent!

Step 5

Arrange the pedals in the drumkit. The primary pedal should be centered on the kick drum, whilethe secondary pedal should be wherever comfortable.

If necessary use the drum key to adjust the height of the beaters to be vertically centered on thekick drum.

Now tighten everything down!

GP Percussion DP778TN Double Bass Pedal Assembly Technique

© iFixit — CC BY-NC-SA www.iFixit.com Page 4 of 6

Step 6

Tighten and loosen the nuts on thebottom of the springs until bothpedals have an even, comfortabletension.

Step 7

Replace the tools in the pedal for safe-keeping.

Bag the extra parts in case you want to convert your double-bass pedal into two singles.

GP Percussion DP778TN Double Bass Pedal Assembly Technique

© iFixit — CC BY-NC-SA www.iFixit.com Page 5 of 6

This document was last generated on 2017-06-24 02:39:29 PM.

Step 8

Pound out some sick beats!

GP Percussion DP778TN Double Bass Pedal Assembly Technique

© iFixit — CC BY-NC-SA www.iFixit.com Page 6 of 6