government of india - india today...

24
Government of India Ministry of Defence Indian Ordnance Factories Machine Tool Prototype Factory, Ambarnath, Dist. Thane, Maharashtra 421 502 Applications are invited from citizens of India fulfilling the requisite qualification for filling up of the following posts in Non Industrial Establishment (Group-‘C’) at Machine Tool Prototype Factory, Dist-Thane, Maharashtra 421 502 : Sl. No Name of the post Pay band Vacancy position Total UR SC ST OBC Ex- SM PWD 1. Lower Division Clerk ` 5200-20200 (PB-1) + Grade pay ` 1900* 08 01 01 04 01 -- 14 2. Civilian Motor Driver(Ordinary Grade) (Male) ` 5200-20200 (PB-1) + Grade pay ` 1900* 01 -- -- -- -- -- 01 3. Multi-tasking Staff ` 5200-20200 (PB-1) + Grade pay ` 1800* 06 -- 01 05 01 01 VH(B, LV) 12 4. Durwan (Male) ` 5200-20200 (PB-1) + Grade pay ` 1800* 03 01 -- -- 01 -- 04 * Plus allowances applicable to Central Govt. employees. Age limit : For post at Sl. No.1 - Between 18 to 27 years. For post at Sl. No.2 - Between 18 to 32 years. For post at Sl. No.3 - Between 18 to 25 years. For post at Sl. No.4 - Between 20 to 27 years. The upper age limit is relaxable by 05 years for SC/ST and 03 years for OBC for the post reserved for them. For Persons with Disabilities (PWD), the relaxation will be 10 years (in case of SC/ST/OBC the relaxation will be in addition to the age relaxation mentioned above). For Govt. servants with three years continuous service, age limit is 40 years for General candidates, 43 for OBC candidates and 45 for SC/ST candidates. For Ex-servicemen, relaxation will be as per existing rules. The crucial date for reckoning age limit shall be the closing date for submission of application. Qualification : For post at Sl. No.1 Essential: (i) 12 th Class or equivalent from a recognized Board or university. (ii) Skill test norms only on computers - English Typing @ 35 w.p.m., Hindi Typing @ 30 w.p.m. (35 w.p.m. and 30 w.p.m. correspond to 10,500 KDPH/ 9000 KDPH on an average of 5 key depressions for each word). For post at Sl. No.2 Essential: (i) Matriculation from a recognized university or board (ii) Must possess license for driving light and heavy vehicles with basic knowledge in automobile repairing For post at Sl. No.3 Essential: Matriculation pass from a recognized board or university or equivalent. Cont. Pg. 2

Upload: others

Post on 25-Jan-2020

4 views

Category:

Documents


0 download

TRANSCRIPT

  • Government of India Ministry of Defence

    Indian Ordnance Factories Machine Tool Prototype Factory, Ambarnath,

    Dist. Thane, Maharashtra 421 502

    Applications are invited from citizens of India fulfilling the requisite qualification for filling up of the following posts in Non Industrial Establishment (Group-‘C’) at Machine Tool Prototype Factory, Dist-Thane, Maharashtra 421 502 :

    Sl. No Name of the post Pay band

    Vacancy position Total UR SC ST OBC Ex-SM PWD

    1. Lower Division Clerk ` 5200-20200 (PB-1) + Grade pay ` 1900* 08 01 01 04 01 -- 14

    2. Civilian Motor Driver(Ordinary Grade) (Male)

    ` 5200-20200 (PB-1) + Grade pay ` 1900* 01 -- -- -- -- -- 01

    3. Multi-tasking Staff ` 5200-20200 (PB-1) + Grade pay ` 1800* 06 -- 01 05 01 01

    VH(B, LV)

    12

    4. Durwan (Male) ` 5200-20200 (PB-1) + Grade pay ` 1800* 03 01 -- -- 01 -- 04

    * Plus allowances applicable to Central Govt. employees.

    Age limit : For post at Sl. No.1 - Between 18 to 27 years. For post at Sl. No.2 - Between 18 to 32 years. For post at Sl. No.3 - Between 18 to 25 years. For post at Sl. No.4 - Between 20 to 27 years. The upper age limit is relaxable by 05 years for SC/ST and 03 years for OBC for

    the post reserved for them. For Persons with Disabilities (PWD), the relaxation will be 10 years (in case of

    SC/ST/OBC the relaxation will be in addition to the age relaxation mentioned above).

    For Govt. servants with three years continuous service, age limit is 40 years for General candidates, 43 for OBC candidates and 45 for SC/ST candidates.

    For Ex-servicemen, relaxation will be as per existing rules. The crucial date for reckoning age limit shall be the closing date for submission of application.

    Qualification : For post at Sl. No.1

    Essential:

    (i) 12th Class or equivalent from a recognized Board or university. (ii) Skill test norms only on computers - English Typing @ 35 w.p.m., Hindi Typing @ 30 w.p.m. (35 w.p.m. and 30 w.p.m. correspond to 10,500 KDPH/ 9000 KDPH on an average of 5 key depressions for each word).

    For post at Sl. No.2 Essential: (i) Matriculation from a recognized university or board

    (ii) Must possess license for driving light and heavy vehicles with basic knowledge in automobile repairing

    For post at Sl. No.3 Essential: Matriculation pass from a recognized board or university or equivalent.

    Cont. Pg. 2

  • [Page No.2]

    For post at Sl.No.4

    Essential: Desirable:

    Matriculate or equivalent pass. (i) Must be physically fit for the duties of Durwan as per specified

    standards indicated below : a. Height without shoes - 165 cm b. Chest - unexpanded - 77 cm

    - expanded - 82 cm c. Weight - 45 kg

    (i) Ex-serviceman. (ii) Three years service as Home Guard/Civil Defence volunteer and

    training in at least basic and refresher courses in Home guard and Civil defence.

    The last date for receipt of application will be 21 days from the date of first appearance of advertisement in Employment News. For example, if the advertisement appears in the Employment News dated 21-27 January, the last date shall be 11th of February.

    Scheme & syllabus of examination for the post of Lower Division Clerk

    Scheme of examination : 1. The examination will consist of a written examination of 200 marks and typing test on

    computer. 2. After the written examination the number of candidates to be called on the basis of merit

    for typing test shall be in the ratio 1:5 i.e. five times the number of vacancies. 3. Merit of candidates will be decided on the basis of the total marks scored in the written

    examination subject to qualifying in the typing test. 4. The typing test is of qualifying in nature. Failure in the typing test shall be failure in the

    examination. 5. Resolution of Tie cases - Tie cases will be resolved by applying one after another as

    applicable till the Tie is resolved :

    i) Date of birth, with older candidate placed higher. ii) Alphabetical order in which the first names of the candidates appear. Scheme of written examination : The written examination will consist of one objective type multiple choice question paper of 200 marks as shown below :

    Part Subject Max Marks & number of questions

    Time duration

    Time duration for visually handicapped candidates

    I General Intelligence 50 (50 questions)

    2 hours 2 hours 40 minutes II English Language (Basic knowledge) 50 (50 questions) III Quantitative Aptitude (Basic Arithmetic Skill) 50 (50 questions) IV General Awareness 50 (50 questions)

    Cont. Pg. 3

  • [Page No.3] Note - 1 : Question paper will be set in English/Hindi except Part-II which will be set in

    English. Note - 2 : There will be negative marking of 0.25 marks for each wrong answer. Note - 3 : Standard of question will be of the level to commensurate with educational

    qualification for the post i.e. 12th standard Note - 4 : Visually handicapped (VH) candidates with visual disabilities of forty percent or

    above can avail the assistance of scribe in the written examination subject to such requests being made at the time of applying for the examination. Question papers and answer sheets will not be provided in Braille.

    Note - 5: Persons with visual disability of less than forty percent will not be considered as

    visually handicapped persons. One eyed candidates and partially blind candidates who are able to read with or without magnifying glass will be allowed to use the magnifying glass in the Examination hall and will not be entitled to a Scribe. Such candidates will have to bring their own magnifying glass to the examination hall.

    Syllabus of written examination. General intelligence :

    Semantic Analogy, Symbolic/Number Analogy, Figural Analogy, Semantic Classification, Symbolic/Number classification, Figural classification, Semantic Series, Number Series, Figural Series, Problem Solving, Word Building, Coding and de-coding, Numerical operations, Symbolic operations, Trends, Space Orientation, Venn Diagrams, Drawing inferences, Punched hole/pattern-folding & unfolding, Figural Pattern - folding and completion, Embedded figures, Critical Thinking, Emotional Intelligence, Social Intelligence, Other sub-topics, if any. English Language

    Spot the Error, Fill in the blanks, Synonyms/Homonyms, Antonyms, Spellings/Detecting Mis-spelt words, Idioms & Phrases, One word substitution, Improvement of Sentences, Active/Passive voice of verbs, Conversion into Direct/Indirect narration, Shuffling of Sentence parts, Shuffling of sentences in a passage, Cloze passage, Comprehension passage. Quantitative Aptitude

    Arithmetic 1. Number systems : Computation of Whole numbers, Decimal and fractions and Relationship between numbers.

    2. Fundamental Arithmetical Operations : Percentages, Ratio and Proportion, Square roots, Averages, Interest (Simple and Compound), Profit and Loss, Discount, Partnership business, Mixture and Alligation, Time and distance, Time and work

    Algebra 1. Basic algebraic identities of School Algebra (and their simple applications) e.g. formulae for (a+b)2, (a-b)2, (a+b)3, (a-b)3, a3-b3, a3+b3, a2-b2; if a+b+c=0, then a3+b3+c3=3abc etc and elementary Surds (Simple problems)

    2. Graphs of linear equations. Geometry Familiarity with elementary geometric figures and facts :

    1. Triangle and its various kinds of centres viz centroid, incentre, orthocentre, and circumcentre.

    2. Congruence and Similarity of triangles. 3. Circle and its chords, tangents, angles subtended by chords of a circle,

    Common tangents to two or more circles. Cont. pg. 4

  • [Page No.4] Mensuration Triangle, Quadrilaterals, Regular Polygons (sum of the internal angles of a

    polygon), Circle, Right Prism, Right Circular Cone, Right Circular Cylinder, Sphere, Hemispheres, Rectangular Parallelepiped, Regular Right Pyramid with triangular or square base.

    Trigonometry 1. Trigonometry (for acute angles θo, with 0o≤θ≤90o), Trigonometric ratios,

    Degree and Radian Measures, Standard Identities like sin2θ+ cos2θ=1 etc., 2. Complementary Angles, Heights and distances (Simple problems only).

    Statistical Charts Use of Tables and Graphs : Histogram, Frequency polygon, Bar-diagram, Pie-chart General Awareness : Questions will be designed to test the ability of the candidate’s general awareness of environment around him/her and its application to society. Questions will also be designed to test knowledge of current events and of such matters of everyday observation and experience in their scientific aspect as may be expected of an educated person. The test will also include questions relating to India and its neighboring countries especially pertaining to History, Culture, Geography, Economic Scene, General Polity and scientific research. Typing test 1. The typing test will be conducted in English or Hindi and candidates while applying for

    the examination, will have to indicate their option. 2. Typing test will be administered on Computer, to be provided by the Factory/Unit. 3. Candidates opting for English typing shall have typing speed of 35 words per minute and

    those opting for Hindi typing shall have typing speed of 30 words per minute on computer. Thirty five w.p.m. and thirty w.p.m. correspond to 10500 key depressions per hour and 9000 key depressions per hour respectively. The speed will be adjudged on the accuracy of typing on the Computer of a given text passage in 10 minutes.

    4. Visually handicapped candidates (with 40% disability and above) will be provided

    passage dictators for the typewriting test by the factory. The passage dictators will read out the passage to the VH candidates within the allotted time period.

    Scheme & syllabus of examination for the post of Civilian Motor Driver(Ordinary Grade) Scheme of examination The examination consists of a written test of 100 marks and skill test of 100 marks. Scheme of written test The written examination consists of one objective multiple choice question paper as shown below:

    Part Subject Maximum Marks & Number of questions Duration

    I General Intelligence (10th standard) 40 (40 questions) 2 hours II General English (10th standard) 10 (10 questions)

    III General Driving Awareness 50 (50 questions) Note : Question paper will be set in English/Hindi/Marathi except part-II which will be set in

    English only. Cont. Pg. 5

  • [Page No.5] Syllabus of written test : I. General Intelligence :

    The questions will include both verbal and non-verbal type. The test may include questions on analogies, similarities, differences, space visualization, visual memory, discrimination observation, relationship concept & 10th standard arithmetic.

    II. General English :

    The questions will include candidate’s understanding of the basics of English language, its vocabulary, grammar, sentence structure, synonyms, antonyms and its correct usage, etc.

    III. General Driving Awareness :

    The test will include common questions on General knowledge, traffic rules, knowledge about motor vehicles, their maintenance and repair.

    Skill test : Skill test on driving shall be conducted for only those candidates who attain a minimum qualifying standard in the written examination. Number of candidates to be called for the skill test will be 1:5 i.e. five times the number of vacancies. The skill test on driving will be same/similar to the tests as are being conducted by the RTOs for giving driving license. The grading of candidates(selected in written test) will be done based on their assessed skill in driving, without taking into account the marks scored in the written test.

    Scheme of examination for the post of Multi-tasking staff

    Scheme of examination : The examination will consist of a written test of 150 marks. Scheme of written test : The written test consists of one objective type multiple choice question paper as shown below :

    Part Subject Maximum marks & Number of questions

    Duration Time duration for visually handicapped candidates

    A General Intelligence & Reasoning (10th Standard) 25 (25 questions)

    2 hours 2 hours 40 minutes B Numerical aptitude (10th Standard) 25 (25 questions)

    C General English (10th Standard) 50 (50 questions)

    D General Awareness (10th Standard) 50 (50 questions)

    Cont. Pg. 6

  • [Page No.6]

    Note 1: Question paper will be set in English/Hindi/Marathi except part C which will be set in

    English. Note 2: There will be negative marking of 0.25 marks for each wrong answer Note 3: Merit of candidates will be decided on the basis of total marks scored in the written

    examination. Note 4: Resolution of Tie cases - Tie cases will be resolved by applying one after another, as

    applicable till the Tie is resolved : (i) By referring to the marks in Part-C of the written objective type paper. (ii) By referring to the marks in Part-B of the written objective type paper. (iii) Date of birth i.e. the candidate older in age gets preference. (iv) By referring to the alphabetical order of the names taking first name into

    consideration. Syllabus of written test : Questions on General Intelligence and reasoning will be non-verbal. Questions on Numerical aptitude and General English will be simple, of a level that an average Matriculate will be in a position to answer comfortably. Questions on General Awareness will be also of similar standard. A. General Intelligence : It would include questions of non-verbal type. The test will

    include questions on similarities and differences, space visualization, problem solving, analysis, judgement, decision making, visual memory, discriminating observation, relationship concepts, figure classification, arithmetical number series, non-verbal series etc. The test will also include questions designed to test the candidate’s abilities to deal with abstract ideas and symbols and their relationship, arithmetical computation and other analytical functions.

    B. English language : Candidate’s understanding of the basics of English language, its

    vocabulary, grammar, sentence structure, synonyms, antonyms and its correct usage etc. His/her writing ability would be tested.

    C. Numerical aptitude : This paper will include questions on problems relating to number

    systems, computation of whole numbers, decimals and fractions and relationship between numbers, fundamental arithmetical operations, percentages, ratio and proportion, averages, interest, profit and loss, discount, use of tables and graphs, mensuration, Time and distance, ratio and time, Time and work etc.

    D. General Awareness : Questions will be designed to test the ability of the candidate’s

    general awareness of the environment around him/her and its application to society. Questions will also be designed to test knowledge of current events and of such matters of everyday observation and experience in their scientific aspects as may be expected of an educated person. The test will also include questions relating to India and its neighbouring countries especially pertaining to Sports, History, Culture, Geography, Economic scene, General Polity including Indian Constitution and Scientific Research etc. These questions will be such that they do not require a special study of any discipline.

    Cont. Pg. 7

  • [Page No.7]

    Scheme of examination for the post of Durwan

    Scheme of examination 1. Written Test

    Subject Maximum marks

    Number of questions Duration

    General Intelligence 10th standard

    (objective type)

    25 25

    2 hours General Awareness 50 50 English language 50 50 Numerical Aptitude 25 25 Syllabus I. General Intelligence

    The questions will be of 10th Standard and would include questions of non-verbal type. The test may include questions on analogies, similarities and differences, space visualization, problem solving, analysis, judgment, decision making, visual memory, discrimination observation, relationship concepts, figure classification, arithmetical number series, non-verbal series. The test will also include questions designed to test the candidate’s abilities to deal with abstract ideas and symbols and their relationship, arithmetical computation and other analytical functions. II. General awareness

    The questions will be of 10th Standard. Questions will be designed to test the ability of the candidate’s general awareness of the environment around him and its application to society. Questions will also be designed to test knowledge of current events and of such matters of everyday observation and experience in their scientific aspects as may be expected of an 10th standard educated person. The test will also include questions relating to India and its neighboring countries especially pertaining to Sports, History, Culture, Geography, Economic scene, General Polity including Indian Constitution, and Scientific Research etc. These questions will be such that they do not require a special study of any discipline. III. English language

    The questions will be of 10th Standard. Candidate’s understanding of the basics of English language, its vocabulary, grammar, sentence structure, synonyms, antonyms and its correct usage, etc and writing ability would be tested. IV. Numerical aptitude

    The paper will include questions on problems relating to Number Systems, Computation of Whole Numbers, Decimals and Fractions and relationship between Numbers, Fundamental Arithmetical Operations, Percentages, Ratio and Proportion, Averages, Interest, Profit and Loss, Discount, use of Tables and Graphs, Mensuration, Time and Distance, Ratio and Time, Time and Work etc. 2. The number of candidates to be called for the measurement of physical standards and screening test on the basis of merit in the written test shall be in the ratio of 1:10 to the number of vacancies. The physical test & screening test are only of qualifying nature.

    Cont. Pg. 8

  • [Page No.8]

    a) Measurement of physical standards (As per specifications mentioned in qualification) b) Screening test- Running of 100 meters in 15 seconds.

    Final grading will be decided on marks obtained in written test subject to qualifying in measurement of physical standards & screening test. GENERAL CONDITIONS: 1. Application form should be downloaded from website on A-4 size paper. Application

    form available on the website should only be used for application. 2. The applicant should clearly specify the post applied for in the space provided in the

    application format otherwise the application will be summarily rejected without any communication.

    3. In case a candidate desires to apply for more than one post, separate applications complete in all respects should be forwarded

    4. SC/ST/OBC certificates should be issued by competent authority and should be in the prescribed format applicable for reservation in jobs under Govt. of India. OBC certificate must specifically include the clause regarding “exclusion from creamy layer” and should be valid at the relevant point of time i.e. last date of receipt of application.

    5. Persons working in Central / State Govt. / PSUs must apply through proper channel along with a certificate from their Head of Office/Establishment that neither any vigilance nor disciplinary action is pending or contemplated against them, and that they have no objection in releasing them in case of selection. Application not accompanying ‘No Objection Certificate’ and/or received after due date will be summarily rejected without any communication.

    6. Application in the prescribed format duly filled in all respects along with self attested copies of all certificates pertaining to qualification, age, caste and admit card(in duplicate) should be enclosed in an envelope superscribing “APPLICATION FOR THE POST OF ________________” so as to reach The General Manager, Machine Tool Prototype Factory, Ambarnath 421502 within 21 days from the date of the publication of advertisement in the Employment news. Applications received after 1700 hours on the last date of receipt of application will not be considered.

    7. Self attested photocopies of certificates in support of caste, qualification and age proof (10th /High School pass certificate) must be enclosed with respect to the post applied for. Ex-servicemen should enclose copy of self attested discharge certificate. The PWDs should enclose self attested copy of physical disability certificate issued by the Competent authority.

    8. Candidates must affix a self attested recent passport size photograph (not more than three months old) on the application form and on the admit card (in duplicate-one photograph on each card) at the place provided for it.

    9. Candidates must send examination fees of `. 50/- in the form of Crossed Indian Postal Order (IPO) in favour of The General Manager, Machine Tool Prototype Factory, Ambarnath. The examination fee is not refundable. SC/ST, Ex-Servicemen and PHP candidates are exempted from fee.

    10. Incomplete applications or applications received without prescribed fee/self attested copies of documents or received after due date will not be considered and will be rejected without any communication.

    Cont. Pg. 9

  • [Page No.9]

    11. Visually handicapped (VH) candidates with visual disabilities of forty percent or above for the post of Lower Division Clerk/Multi-Tasking Staff can avail the facility of scribe. The candidate himself should arrange for the scribe and intimate the same at the time of applying for the examination. Persons with visual disability of less than forty percent will not be considered as visually handicapped persons. One eyed candidates and partially blind candidates who are able to read with or without magnifying glass will be allowed to use the magnifying glass in the Examination hall and will not be entitled to a Scribe.

    12. Candidates appearing for examination will travel at their own expenses. Travelling allowance (only IInd Class Fare) will be reimbursed only for SC/ST candidates called for written test as per rules on production of Rail/Bus tickets by the shortest route.

    13. Please note that bringing any outside, extraneous or political influence for getting employment in the factory shall render a candidate ineligible.

    14. The candidates furnishing fake Experience Certificates/Caste Certificate or any other academic certificates are liable to be terminated after appointment. Apart from this, other suitable action may also be initiated as per the Law of the Land. Hence, candidates are advised not to submit dubious certificates.

    15. GPF or DCRG Scheme is not applicable. The New Pension Scheme i.e. Defined contribution Pension Scheme is compulsory for all appointments in Central Govt. on or after 01.01.2004.

    16. The services are liable to be transferred to anywhere in India. 17. The number of vacancies is subject to variation depending upon the situation at relevant

    point of time. 18. The General Manager/Machine Tool Prototype Factory, Ambarnath reserves the right to

    shortlist candidates to be called for examination/test. Applicants may therefore note that mere fulfilling the minimum criteria/standard for a post will not entitle them for being called for such test. The factory will not entertain any correspondence/interim enquiry in this respect.

    19. The post of Durwan is identified suitable for PH(OA), Lower Division Clerk for PH(OA, OL, BL, B, LV) and the post of MTS for PH(OA, OL, HH, LV, B)

    Abbreviations : OA-one arm, OL-one leg, BL-Both legs, B-Blind, LV-low vision, HH-Hearing handicap. 20. In case of any doubt, English version would stand. Caution to candidates

    Some unscrupulous elements may approach you with the assurance of procuring appointment for you in the factory through illegal gratification. You must not fall prey to such false assurance or exploitation and must not entertain or encourage such elements in any way. It is emphasized and re-assured that the selection exercise will be done on merit only in a transparent manner.

    [Dr. Anil Ranga] Jt. General Manager/A&E

    For General Manager

  • भारत सरकार, र ा मं ालय भारतीय आयुध नमा णयॉ ं

    मशीनी औजार आ द प फै टर , अ बरनाथ िजला-ठाणे, महारा 421502

    मशीनी औजार आ द प फै टर , अ बरनाथ, िजला - ठाणे, महारा 421502 म अनौ यो गक सं थापना ( ुप सी) म न नां कत पद को भरन ेके लए आव यक अहता ा त भारतीय नाग रक से आवेदन आमं त कए जा रहे ह :

    म पद का नाम प-ेबड

    रि तय क ि थ त कुल अनार

    त अनुसू चत जा त

    अनुसू चत जनजा त

    अ य पछड़ा वग

    भूतपूव सेवाकम

    शा रर क वकलांग यि त

    1 अवर ेणी ल पक ` 5200-20200(पी.बी.1)+ ेड पे ` 1900*

    08 01 01 04 01 -- 14

    2 स व लयन मोटर ाइवर (सामा य ेणी) (पु ष)

    ` 5200-20200(पी.बी.1)+ ेड पे ` 1900*

    01 -- -- -- -- -- 01

    3 मि ट टाि कंग टाफ

    ` 5200-20200(पी.बी.1)+ ेड पे ` 1800*

    06 -- 01 05 01 01 VH (B,LV) 12

    4 दरवान (पु ष) ` 5200-20200(पी.बी.1)+ ेड पे ` 1800*

    03 01 -- -- 01 -- 04

    * के सरकार कमचा रय को देय भ ते

    आयु सीमा

    म सं या 1 म उि ल खत पद के लए – 18 से 27 वष म सं या 2 म उि ल खत पद के लए – 18 से 32 वष म सं या 3 म उि ल खत पद के लए – 18 से 25 वष म सं या 4 म उि ल खत पद के लए – 20 से 27 वष

    अनुसू चत जा त/अनुसू चत जनजा त के उ मीदवार हेतु आर त पद के लए अ धकतम आयु सीमा म 5 वष तथा अ य पछड़ी जा त के उ मीदवार हेतु अ धकतम आयु सीमा म 3 वष क छूट द गई है।

    वकलांग यि त (पी.ड यू.डी.) के मामले म यह छूट 10 वष क होगी। (अनुसू चत जा त/अनुसू चत जनजा त तथा अ य पछड़ी जा त के वकलांग उ मीदवार के लए यह छूट उपरो त के अ त र त होगी।)

    तीन वष से नरंतर सेवारत शासक य कमचा रय के मामले म आयु सीमा सामा य वग के लए 40 वष, अ य पछडी जा त के लए 43 वष एवं अनुसू चत जा त/अनुसू चत जनजा त के लए 45 वष ।

    भूतपूव सेवाक मय के मामले म यह छूट व यमान नयम के अनुसार होगी। आयु सीमा क गणना हेतु नणायक त थ आवेदन जमा करने क अं तम त थ होगी।

    पा ता : म सं या 1 म उि ल खत पद के लए अ नवाय : (1) कसी मा यता ा त बोड अथवा व व व यालय से 12 वीं क ा उ तीण या समतु य अहता

    (2) “केवल क यूटर पर” कौशल पर ण मान – क यूटर पर अं ेजी म 35 श द त मनट या ह द म 30 श द त मनट क टंकण ग त। ( येक श द के लए 5 क ड ैशन के औसत पर 10500 क ड ैशन त घंटा या 9000 क ड ैशन त घंटा के अनु प 35 और 30 श द त मनट) ।

    .....2/-

  • [पृ ठ सं 2]

    म सं या 2 म उि ल खत पद के लए अ नवाय : (1) कसी मा यता ा त व व व यालय या बोड से 10 वीं उ तीण

    (2) मोटर गाड़ी मर मत क बु नयाद जानकार स हत भार और ह के वाहन चलाने क अनु ि त (लाइसस)अव य हो ।

    म सं या 3 म उि ल खत पद के लए अ नवाय : मा यता ा त बोड अथवा व व व यालय से 10 वीं उ तीण या समतु य

    म सं या 4 म उि ल खत पद के लए अ नवाय :

    वांछनीय :

    (i) मै कुलेशन या समतु य पास (ii) नीचे दए गए तर के अनुसार दरवान के कत य के लए शार रक प से अव य यो य होना चा हए :

    क. बना जूत ेक ऊंचाई - 165 से.मी. ख. छाती - बना फुलाए - 77 से.मी.

    फुलाकर - 82 से.मी ग. वजन - 45 कलो ाम

    (i) भूतपूव सै नक. (ii) होमगाड/ स वल र ा वयं सेवक के प म तीन वष क सेवा और होमगाड और स वल

    र ा म बु नयाद और पुन चया पा य म श ण ।

    आवेदन ा त करने क अं तम त थ रोजगार समाचार म व ापन का शत होने क थम त थ से 21 दन होगी । उदाहरणाथ य द व ापन दनांक 21-27 जनवर , के रोजगार समाचार म का शत होता है, तो आवेदन ा त करन ेक अं तम त थ 11 फरवर होगी ।

    अवर ेणी ल पक पद के लए पर ा क योजना एवं पा य म

    पर ा क योजना:

    1. पर ा म 200 अंक क ल खत पर ा तथा क यूटर पर टंकण पर ा का समावेश होगा। 2. ल खत पर ा उपरा त व यमान र त पद के लए गुण के आधार पर 1:5 के अनुपात म (अथात

    व यमान र त पद से 5 गुना) उ मीदवार को टंकण पर ा हेतु बुलाया जाएगा। 3. उ मीदवार क गुणता का नधारण ल खत पर ा म अिजत कुल अंक के आधार पर कया जाएगा बशत

    वह टकंण पर ा म उ तीण हो जाए। 4. टंकण पर ा अहक व प क होगी। टंकण पर ा म अनु तीण होने पर पर ा म अनु तीण माना जाएगा। 5. बराबर के मामले म समाधान – बराबर के मामल म न न याओं का समाधान होने तक पालन कया

    जाएगा। क) ज म त थ- पहले ज म ेउ मीदवार को पहले थान दया जाएगा। ख) वण म िजस उ मीदवार का नाम पहले आता हो उसे पहले थान दया जाएगा।

    .....3/-

  • [पृ ठ सं 3] ल खत पर ा क योजना:

    अवर ेणी ल पक पद हेतु पर ा योजना

    ल खत पर ा म न नानुसार 200 अंक के बहु वक पीय व तु न ठ न के एक नप का समावेश होगा:-

    भाग वषय अ धकतम अंक तथा न क सं या

    कुल अव ध

    ि ट बा धत उ मीदवार के लए समयाव ध

    I सामा य बुि दम ता 50(50 न)

    02 घंटे 02 घंटे 40 मनट II अं ेजी भाषा संबंधी (बु नयाद जानकार ) 50(50 न) III गुणा मक अ भ मता (बु नयाद अंकग णत कौशल) 50(50 न) IV सामा य ान 50(50 न) नोट-1: भाग-II को छोड़कर न प अं ेजी तथा ह द दोन भाषाओं म होगा। भाग-II केवल अं ेजी म होगा। नोट-2: यके गलत उ तर के लए 0.25 अंक क नेगे टव मा कग होगी। नोट-3: न का तर पद के लए नधा रत शै णक अहता अथात 12 क ा के अनु प ह गे। नोट-4: 40 तशत या उससे अ धक ि ट बा याता यु त ि ट बा धत (VH) उ मीदवार ल खत पर ा म लेखक

    क सहायता ले सकते ह बशत वे इस आशय का आवेदन पर ा हेतु आवेदन करने के समय कर। न प तथा उ तर प का ेल म नह ं उपल ध करवाई जाएगी।

    नोट-5: ऐसे यि त िजनक ि ट बा धता 40 तशत से कम है को ि ट (VH) बा धत नह ं माना जाएगा। एक ऑख से देखने म स म तथा आं शक तौर पर ि ट बा धत यि त जो क मैि नफाइंग लास क सहायता से अथवा बना मैि नफाइंग लास के, पढ़ने म स म ह को पर ा क म मैि नफाइंग लास का योग करने दया जाएगा क तु लेखक क सहायता नह ं द जाएगी। ऐसा उ मीदवार को अपने मैि नफाइंग लास लाने ह गे।

    ल खत पर ा का पा य म सामा य बुि दम ता

    श दाथगत समानता (सेम टक एनालाजी), तीका मक/अंक य समानता, (सी बॉ लक/नंबर एनालाजी), आकृ तक समानता ( फगरल एनालाजी), श दाथगत वग करण (सेम टक ला स फकेशन), तीका मक/ अंक य वग करण (सी बॉ लक/नंबर ला स फकेशन), आकृ तक वग करण ( फगरल ला स फकेशन), श दाथगत ेणी (सेम टक ेणी), अंक य ेणी (नंबर ेणी), आकृ तक ेणी ( फगरल सी रज), 12 वीं क ा के समक न, श द गढ़न (अथपूण श द बनाना) (वड बि डंग), को डंग एवं ड-को डंग, अंक य सं या ( यूमे रक ऑपरेशन), तीका मक सं या (सी बॉ लक ऑपरेशन), वृ ि तया ं( े डस), अंतर अ भ व यास ( पसे ओ रय टेशन), वेन आरेख (वेन ाय ाम), न कष नकालना ( ाइंग इनफररस), पं ड होल/ त प (पैटन)-वलन व अवलन (फोि डंग व अनफोि डंग), आकृ तक त प (पैटन)-वलन व समापन (फोि डंग ए ड क प लशन), सूचीकरण, सूची बनाना (इ डेि संग), ए ेस मै चंग, डेटा एवं सट मै चंग, से टर कोड/रोल न बर का वग करण, माल एवं कै पटल लेटस/न बर-को डंग, डको डंग एवं वग करण ( ला स फकेशन), ए बडेेड फगस, ववेचना मक वचारण ( टकल थं कंग), भावा मक बु म ता (इमोशनल इंटे लजस), सामािजक बु म ता (सोशल इंटे लजस), अ य उप वषय, य द कोई ।

    .....4/-

  • [पृ ठ सं 4]

    अं ेजी भाषा

    गल तयॉ ं खोजना (Spot the Error), र त थान क पू त (Fill in the blanks), समानाथ श द (Synonyms/Homonyms), व ाथक श द (Antonyms), वतनी जॉचना/ ु टपूण वतनी को पहचानना (Spellings/Detecting Mis-spelt words), मुहावरा एवं वा यांश (Idioms & Phrases), वा याशं के लए एक श द (One word substitution), वा य सुधार (Improvement of Sentences), या संबंधी कतृ वा य/कमवा य (Active/Passive voice of verbs), य कथन से अ य कथन म प रवतन (Conversion into Direct/Indirect narration), वा य के अंश म फेर बदल करना (Shuffling of Sentence parts), वा य के अंश म फेर बदल कर पैसेज बनाना (Shuffling of sentences in a passage), लोज पैसेज(Cloze passage), पैसेज क बो यता अथात पैसेज को समझने क यो यता (Comprehension passage) गुणा मक अ भ मता

    1. अंकग णत क. अंक य प त : पूणाक क गणना, दशमलव एवं भ नता, अंक के म य संबंध। ख. बु नयाद अंकग णतीय सं याएं: तशत, अनुपात एवं भाग, वग मूल, औसत, याज (सामा य एवं च वृ ), लाभ एवं हा न, छूट, सांझा कारोबार, म सचर एवं अि लगेशन (Mixture and alligation), समय एवं दूर , समय व काय।

    2. बीजग णत व यालयीन बु नयाद बीजग णतीय जानका रयॉ ं(एवं उसके सामा य योग) उदाहरणाथ (a+b)2, (a-b)2, (a+b)3, (a-b)3, a3-b3, a3+b3, a2-b2, य द a+b+c=0 तो a3+b3+c3=3abc इ या द एवं ारं भक सडस (सामा य न), रेखीय ाफ समीकरण।

    3. रेखाग णत ारं भक रेखाग णतीय आकृ तय व त य क पहचान, कोण तथा उ त के व वध के अथात क क (स ायड), इनसे टर, आथ से टर तथा सरकमसटर, समशेषता एवं कोण म समानता, वृ त एवं कॉड, पश रेखा(टजट),प र ध के कॉड से अंत रत कया

    गया कोण, दो या दो से अ धक प र ध क सामा य पश रेखा(टजट)। 4. े म त कोण, चतुभुज, नय मत बहु भुज (बहु भुज के आंत रक कोण के जोड़), प र ध,

    राइट म, राइट सकुलर कोन, राइट सकुलर स लंडर, वृ त, गोलाध, आयताकार समानांतर चतुभुज, को णीय अथवा समकोण आधारयु त रे यलुर राइट परा मड।

    5. कोण म त कोण म त (for acute angles θo, with 0o≤θ≤90o), कोण म तक अनुपात ड ी एवं या कोण माप, sin2θ+ cos2θ =1 आ द जैसे मानक एका मकता (आइड टटज), पूरक

    कोण, ऊँचाई एवं दूर (केवल सामा य न)। 6. सांि यक य चाट टेबल एवं ाफ का योग: आयत च ( ह टो ाम), वंसी पॉल गॉन, बार-डॉय ाम।

    सामा य ान

    न उ मीदवार के पयावरण के त सामा य ान और समाज म इसके उपयो गता जाँचने संबंधी ह गे। न उ मीदवार के साम यक ान, त दन क ेपण मता और वै ा नक पहलुओं से उनक अनुभू त जाँचने के लए भी डजाइन कए जाएंगे। पर ा म भारत और उसके पड़ोसी देश से संबं धत वशेष प से इ तहास, सं कृ त, भूगोल, अथ यव था, सामा य राजनी त और वै ा नक अनुसंधान आ द के न का भी समावेश होगा।

    टंकण पर ा

    1. टंकण पर ा अं ेजी तथा ह द दोन भाषाओं म ल जाएंगी तथा उ मीदवार को आवेदन करते समय अपने वक प का चयन करना होगा।

    2. टंकण पर ा नमाणी/यू नट वारा उपल ध करवाए गए क यूटर पर लए जाएगे।

    .....5/-

  • [पृ ठ सं 5]

    3. अं जेी टंकण पर ा का वक प देनेवाले उ मीदवार को 35 श द त मनट तथा ह द म टंकण पर ा का वक प देनेवाले उ मीदवार को 30 श द त मनट क ग त से क यूटर पर टंकण करना होगा। 35 श द त मनट 10500 क ड ैशन त घंटा के अनु प और 30 श द त मनट 9000 क ड ैशन के अनु प है । ग त

    का नणय दए गए अनु छेद को 10 मनट म क यूटर पर प रशु ता के साथ टाइप करने आधार पर कया जाएगा।

    4. 40 तशत या उससे अ धक ि ट बा यता यु त ि ट बा धत (VH) उ मीदवार को नमाणी वारा टंकण पर ा हेतु अनु छेद उ लखेक (पैसेज ड टेटर) उपल ध करवाया जाएगा। ि ट बा धत (VH) उ मीदवार के लए अनु छेद उ लखेक (पैसेज ड टेटर) नधा रत समयाव ध म अनु छेद पढ़ेगा।

    स वल यन मोटर ायवर (साधारण ेड) के पद हेतु पर ा क योजना एवं पा य म

    पर ा क योजना पर ा म 100 अंक क ल खत पर ा एवं 100 अंक क कुशलता पर ा का समावेश होगा।

    ल खत पर ा क योजना ल खत पर ा म न नानुसार बहु वक पीय व तु न ठ न के एक नप का समावेश होगा:

    भाग वषय अ धकतम अंक एवं

    न क सं या समयाव ध

    । सामा य बुि दम ता (क ा 10 वीं का तर) 40 (40 न) 2 घंटे ।। सामा य अं ेजी (क ा 10 वीं का तर) 10 (10 न)

    ।।। सामा य वाहन चालन ान 50 (50 न)

    नोट : केवल भाग ।। को छोड़कर नप अं ेजी/ ह द /मराठ म ह गे। भाग ।। मा अं ेजी म होगा।

    ल खत पर ा का पा य म : 1. सामा य बुि दम ता

    न प म शाि दक (Verbal) एवं अशाि दक (Non-verbal) दोन कार के न सि म लत ह गे । न प म सम पता, समानता और असमानता, पेस व यूलाइजेशन (Space visualization), य मृ त, े ण वभेदन, सम या मूलक (problem solving), व लेषा मक, नणया मक, ववेकशीलता, े ण मता, संबंधा मक संक पना तथा मै क तर के अंकग णत संबंधी न शा मल ह गे।

    2. अं ेजी भाषा

    इसम अ यथ के बुनया द अं ेजी भाषा को समझन,े उसक श दावल , याकरण, वा य संरचना, समानाथ , व ाथ , उसके सह योग आ द का पर ण होगा ।

    3. सामा य वाहन चालन ान: सामा य ान, प रवहन संबंधी नयम, मोटर वाहन संबंधी ान, मर मत एवं अनुर ण संबंधी ान का पर ण कया जाएगा।

    .....6/-

  • [पृ ठ सं 6]

    कुशलता पर ा:

    ल खत पर ा म यूनतम पा ता अंक ा त करने वाल ेउ मीदवार के लए ह वाहन चालन संबंधी कौशल पर ा ल जाएगी। कुशलता पर ा हेतु 1:5 के अनुपात म (अथात व यमान र त पद से 5 गुना) उ मीदवार को बुलाया जाएगा।

    े ीय प रवहन कायालय वारा ाइ व ंग लाइसस दान करने हेतु ल जानेवाल कुशलता पर ा के समान ह कुशलता पर ा न पा दत क जाएगी।

    ल खत पर ा म उ मीदवार वारा अिजत अंक पर वचार न करते हु ए उ मीदवार का म नधारण ( ल खत पर ा म चय नत) उनके वारा वाहन चालन म द शत कुशलता के आधार पर कया जाएगा ।

    मि ट टाि कंग टॉफ पद के लए पर ा क योजना

    पर ा क योजना: 150 अंक क ल खत पर ा होगी। ल खत पर ा म न नानुसार बहु वक पीय व तु न ठ न के एक नप का समावेश होगा:-

    भाग वषय अ धकतम अंक तथा न क सं या

    कुल अव ध

    ि ट बा धत उ मीदवार के लए समयाव ध

    क सामा य बुि दम ता एवं वचारशीलता (क ा 10 वीं का तर) 25(25 न)

    02 घंटे 02 घंटे 40 मनट ख गुणा मक अ भ मता (क ा 10 वीं का तर) 25(25 न) ग अं ेजी भाषा (क ा 10 वीं का तर) 50(50 न) घ सामा य ान (क ा 10 वीं का तर) 50(50 न) नोट-1: भाग-ग को छोड़कर न प अं ेजी, ह द तथा मराठ भाषाओं म होगा। भाग-ग केवल अं ेजी म होगा। नोट-2: यके गलत उ तर के लए 0.25 अंक क नेगे टव मा कग होगी। नोट-3: ल खत पर ा म अिजत कुल अंक के आधार पर उ मीदवार क यो यता नधा रत क जाएगी। नोट-4: बराबर के मामले म समाधान – बराबर के मामल म न न याओं का, समाधान होने तक पालन

    कया जाएगा। 1) भाग-ग के बहु वक पीय व तु न ठ न म अिजत अंक के आधार पर। 2) भाग-ख के बहु वक पीय व तु न ठ न म अिजत अंक के आधार पर। 3) ज म त थ- पहले ज मे उ मीदवार को पहले थान दया जाएगा। 4) वण मानुसार- िजस उ मीदवार का नाम पहले आता हो उसे पहले थान दया जाएगा।

    ल खत पर ा का पा य म : सामा य ान एवं वचारशीलता संबंधी अशाि दक (Non-verbal) न पूछे जाएंगे। गुणा मक अ भ मता तथा सामा य अं ेजी संबंधी साधारण न ह गे िजनका मै क तर तक पढ़ा हुआ उ मीदवार सहजता से उ तर दे सकता है। सामा य जाग कता संबंधी न भी उसी तर के ह गे।

    .....7/-

  • [पृ ठ सं 7] सामा य बुि दम ता इसम अशाि दक (Non-verbal) कार के न समा हत ह गे। न प म समानता और असमानता, पेस व यूलाइजेशन (Space visualization), सम या समाधान, व लेषण, नणय, नणयन मता, य मृ त, े ण वभेदन, संबंधा मक संकल ्पना, आकृ तक वग करण, अंकग णतीय सं या म, अशाि दक म आ द का सामावेश होगा। पर ा म ऐसे न का भी सामावेश होगा िजससे उ मीदवार क अमूत क पनाएं एवं च न तथा उनका सहसंबंध ात करने क मता, अंकग णतीय गणना व अ य वषलेषणा मक याओं के ान का मू याकंन कया जाएगा। अं ेजी भाषा इसम अ यथ के बुनया द अं ेजी भाषा को समझन,े उसक श दावल , याकरण, वा य संरचना, समानाथ , व ाथ , उसके सह योग आ द का पर ण होगा । उ मीदवार क लेखन मता का पर ण कया जाएगा।

    गुणा मक अ भ मता इस न प म सं या णाल , पूणाक क गणना, दशमलव, अंश, सं या म सह संबंध, मूलभूत अंकग णतीय गणना, तशत, अनुपात, औसत, याज, लाभ एवं हा न, छूट, टेबल एवं ाफ का उपयोग, े म त, समय एवं दूर , अनुपात एवं समय, समय एवं काय आ द से संबं धत न पूछे जाएंगे।

    सामा य जाग कता

    इसके अंतगत पयावरण के त सामा य जाग कता और समाज म इसक उपयो गता जॉचना संबंधी न उ मीदवार से पूछे जाएंगे। न उ मीदवार के साम यक ान, त दन क ेपण मता और वै ा नक पहलुओं से उनक अनुभू त जाँचने के लए भी डजाइन कए जाएंगे। पर ा म भारत और उसके पड़ोसी देश से संबं धत वशेष प से खेल, इ तहास, सं कृ त, भूगोल, अथ यव था, रा य यव था, भारतीय सं वधान, सामा य राजनी त और

    वै ा नक अनुसंधान आ द के न का भी समावेश होगा। यह न ऐसे ह गे क िजसके लए कसी वषय का वशेष अ ययन करना आव यक नह ं होगा।

    दरवान पद हेत ुपर ा योजना

    पर ा क योजना 1. ल खत पर ा

    वषय अ धकतम न क सं या समयाव ध सामा य बुि दम ता

    क ा 10 वीं का तर (व तु न ठ)

    25 25

    2 घंटे सामा य ान 50 50 अं ेजी भाषा 50 50

    ग णतीय अ भ मता 25 25

    .....8/-

  • [पृ ठ सं 8]

    पा य म

    1. सामा य बुि दम ता

    न 10 वीं क ा के तर के होगे िजसम अशाि दक कार के न सि म लत ह गे । न प म सम पता, समानता और असमानता, पेस व यूलाइजेशन (Space visualization), सम या मूलक (problem solving), व लेषा मक, नणया मक, य मृ त, ववेकशीलता, े ण मता, संबधा मक वचार, अंक वग करण अंकग णत, सं या म, अशाि दक म, संब धत न ह गे । पर ा म उ मीदवार के अमूत वचार तथा च ह एवं उनके संबंध पर वचार करने क मता, अंकग णत संगणन एवं अ य व लेषणा मक काय को जॉचने हेतु भी न शा मल ह गे ।

    2. सामा य ान

    न 10 वीं क ा के तर के होगे । न, अ यथ के आसपास के प रवेश क जानकार एवं उसके समाज म युि त क मता जॉ ं चने हेतु तैयार कये जायेगे । न प म साम यक घटना म का ान एवं पयावरण के त सामा य ान एवं 10 वीं तर तक श त यि त से उ मीद कये जाने वाले त दन अवलोकन के वषय

    तथा उनके वै ा नक पहलू के अनुभव से संबं धत न भी ह गे । पर ा म भारत तथा इसके पड़ोसी देश से संबं धत वशेष प से खले, इ तहास, सं कृ त, भूगोल, अथशा , रा य यव था, भारतीय सं वधान समेत सामा य राजनी त, और वै ा नक अनुसंधान आ द के बारे म न भी शा मल ह गे । न इस कार के होग क उ हे कसी वषय के वशेष अ ययन क आव यकता नह ं होगी ।

    3. अं ेजी भाषा

    न 10 वीं क ा के तर के होगे । इसम अ यथ के मूल अं ेजी भाषा को समझन,े उसक श दावल , याकरण, वा य संरचना, समानाथ , व ाथ , उसके सह योग, एवं लेखनीय मता का पर ण होगा ।

    4. सं या मक अ भ मता

    न प म सं या प द त, पूण सं या क सं याऐं, दशमलव, भ न, सं याओं के बीच संबंध, मूलभूत अंकग णत सं याऐं, तशत, अनुपात एवं समानुपात, औसत, याज, लाभ हा न, ब ा, सारणी एवं ाफ का योग, े म त, समय एवं दूर , अनुपात एवं समय, समय एवं काय आ द से संब धत न समा हत कए जाएग ।

    ल खत पर ा म ा त यो यता के आधार पर व यमान र त पद के 1:10 अनुपात म उ मीदवार को शार रक मापद ड के मापन तथा नंग पर ा हेतु बुलाया जाएगा। शार रक एवं नंग पर ा व प म अहक ह गी। क) शार रक मापद ड का मापन (अहता म न द ट व नदश के अनुसार) ख) नंग पर ा- 15 सेकंड म 100 मीटर दौड़। उ मीदवार क गुणता का नधारण ल खत पर ा म अिजत कुल अंक के आधार पर कया जाएगा बशत वह शार रक मापद ड एवं क नंग पर ा म उ तीण हो जाए ।

    .....9/-

  • [पृ ठ सं 9]

    सामा य शत :

    1. आवेदन प वेबसाइट से ए-4 आकार के पृ ठ पर डाउनलोड कर । केवल वेबसाइट म उपल ध व हत प ह आवेदन हेतु इ तेमाल कर ।

    2. आवेदन प म दए गए नधा रत थान पर आवे दत पद का प टतया उ लखे कया जाए अ यथा बना कसी ाचार के आवेदन को अ वीकृत कर दया जाएगा।

    3. एक से अ धक पद के लए आवेदन करने के इ छुक उ मीदवार को यके पद के लए अलग से सभी तरह से पूण आवेदन े षत करना होगा।

    4. अनुसू चत जा त/अनुसू चत जनजा त/अ य पछड़े वग के माण स म ा धकार दारा नधा रत प म जार कए गए ह जो क शासक य सेवाओं म आर ण के लए वीकाय होने चा हए । अ य पछड़े वग माणप म वशेष प से मी लेयर अपवजन मा णत होना चा हए एवं ऐसे माणप वतमान समय म

    (आवेदन ा त करने क त थ को) अ यतन वैध होना चा हए।

    5. के य/रा य/लोक उप म म सेवारत यि त उनके वभागा य दारा जार इस बाबत माणप क उन उपर कसी कार क कोई अनुशास नक कायवाह न तो लं बत है न ह वतमान म जार है एवं इस बाबत अनापि त माणप क चयन होने पर अ यथ को कायमु त करने म कोई आपि त नह ं है, के साथ अपना आवेदन उ चत मा यम से े षत कर । आवेदन अनापि त माणप के बना एवं/अथवा नधा रत त थ के उपरांत ा त होने पर बना कसी सूचना के सीधे अ वीकार कर दए जाएग ।

    6. व हत प म आवेदन भर कर अहता, आयु, जा त के माणप तथा वेश प (दो तय म) क वत: स या पत छाया त के साथ संल न कर । लफाफे के उपर “___________ पद के लए आवेदन” लखकर, आवेदन े षत करे ता क वह महा बंधक, मशीनी औजार आ द प नमाणी, अ बरनाथ को रोजगार समाचार म व ापन का शत होने क त थ से 21 दन के भीतर ा त हो । आवेदन ा त करने क अं तम त थ को अप 1700 बजे के बाद ा त आवेदन पर वचार नह ं कया जाएगा ।

    7. जा त, अहता एवं आयु (10वीं क ा/हाई कूल का माणप ) के माणन हेतु सभी माणप क छाया त वत: स या पत कर संल न कर । भूतपूव सै नक सेवा-मुि त माणप क वत: स या पत त

    संल न कर । शार रक प स े वकलांग अ यथ स म धकार दारा जार शार रक वकलांगता के माणप क वत: स या पत त संल न कर ।

    8. आवेदन प तथा वेश प (दो तय ) पर नधा रत थान पर पासपोट आकार का व स या पत फोटो (तीन मह ने से अ धक पुराना नह )ं चपकाएं।

    9. अ यथ आवेदन के साथ पर ा शु क के प म महा बंधक/मशीनी औजार आ द प नमाणी अ बरनाथ के प म देय ` 50/- का ा ड इं डयन पो टल आडर (आई.पी.ओ.) े षत कर । पर ा शु क अ यापणीय है। आवेदन करने वाले अनुसू चत जा त/जनजा त, भूतपूव सै नक तथा शा रर क प से वकलांग उ मीदवार को पर ा शु क से छूट द गई है।

    10. अपूण अथवा बना व हत पर ा शु क/ वत: स या पत माणप क तय अथवा नधा रत त थ के बाद ा त आवेदन पर वचार नह ं कया जाएगा एवं उ ह बना कसी सूचना के नर त कर दया जाएगा।

    11. अवर ेणी ल पक मि ट टाि कंग टॉफ पद हेतु आवेदक 40 तशत या उससे अ धक ि ट बा धत उ मीदवार ल पक (स ाइब) क सु वधा ले सकते ह । ऐसे उ मीदवार को अपने लए वतः ल पक (स ाइब) क यव था करनी होगी तथा प र ा के लए आवेदन करते समय इसक सूचना देनी होगी । ऐस ेयि त िजनक ि ट बा धता 40 तशत से कम है को ि ट बा धत नह ं माना जाएगा । एक ऑख से देखने म स म तथा आं शक तौर पर ि ट बा धत यि त जो क मैि नफाइंग लास क सहायता से अथवा बना मैि नफाइंग लास के, पढ़ने म स म ह को, पर ा क म मैि नफइंग लास का योग करने दया जाएगा क तु लेखक क सहायता नह ं द जाएगी ।

    .....10/-

  • [पृ ठ सं 10]

    12. अ यथ अपने खच पर पर ा म सि म लत होग । केवल अनुसू चत जा त/जनजा त के उ मीदवार को नकटतम सीध ेमाग के लए वतीय ेणी साधारण दर पर आने एवं जाने के लए नयामानुसार रेलव/ेबस टकट तुत करने या ा भ ता पर दान कया जाएगा ।

    13. नमाणी म भत पाने हेत,ु अ यथ वारा कसी भी कार का बा य अथवा राजनै तक भाव लाने पर उस अ यथ को अपा माना जाएगा ।

    14. जाल /अस य अनुभव माणप /जा त माणप या अ य शै णक माणप तुत करने पर अ याथ को पद के लए अयो य घो षत कया जाएगा तथा नयुि त उपरांत भी सेवा से न का षत कया जाएगा । इसके अ त र त कानूनी नयमानुसार अ य कायवाह भी क जा सकती है । अत: अ या थय को सलाह द जाती है क जाल /अस य माणप तुत न कर ।

    15. जी.पी.एफ या डी.सी.आर.जी योजना लागू नह ं होगी । के सरकार म दनांक 01.01.2004 से नयुि तय के लए नई पशन योजना “Defined Contribution Pension Scheme” अ नवाय है ।

    16. सेवाएं भारत म कसी भी थान पर थाना त रत क जा सकती है ।

    17. ि थ त अनुसार रि तय क सं या घट या बढ़ सकती है । 18. महा बंधक, मशीनी औजार आ द प नमाणी, अ बरनाथ, चयन पर ा म बुलाए जाने वाले अ य थय का

    छंटनीकरण करने का अ धकार रखते है । अत: अ यथ यान रखे क पद के लए नधा रत यूनतम अहता धारण करना मा चयन पर ा म बुलाए जाने के लए पा ता दान नह ं करता है । इस वषय म नमाणी कसी भी कार के प ाचार/अंत रम पूछताछ पर वचार नह ंकरेगी ।

    19. दरवान का पद शार रक अश त PH(OA), तथा अवर ेणी ल पक का पद PH(OA, OL, BL, B, LV) के लए चि हत (identified) है। एम.ट .एस. का पद शार रक अश त PH(OA, OL, HH, LV, B) के लए चि हत (identified) है ।

    सं ेपण:- OA- एक हाथ, OL- एक पैर, BL- दोन पैर, B-ने ह न, LV-कम ि ट, HH- वण असमथता।

    20. कसी भी कार क शंका क ि थ त म इस व ापन के अं ेजी सं करण को माना जाएगा।

    अ य थय को चेतावनी

    कुछ अनै तक त व अवैध तु ट करण के मा यम से नमाणी म नयुि त दलाने का आ वासन देते हुए अ य थय के पास पहुच सकते ह । अ यथ ऐसे कसी कार के गलत आ वासन या शोषण का शकार न बन तथा ऐसे त व के आ वासन वीकार न कर या बढ़ावा न द । इस बात पर जोर दया जाता है तथा यह पुन: आ वा सत कया जाता है क अ यथ का चयन पर ा म ा त अंक के आधार पर पारद शता रखते हु ए कया जाएगा ।

    [डॉ.अ नल रंगा] संयु त महा बंधक/ए एवं इ

    कृते महा बंधक

  • FORMAT OF APPLICATION FORM (To be filled in block letters)

    To, The General Manager Machine Tool Prototype Factory Ambarnath

    Application for the post of _________________________

    Ref: Employment news advertisement no. ___________ dated ____________

    Paste recent self attested passport

    size photo (do not staple)

    1. Name in Block Letters as per SSC certificate

    2. Father’s/Husband’s Name

    3. Nationality

    4. Religion

    5. Date of Birth (Christian Era)

    Day Month Year 6.

    Age on the last date of application

    Yrs Month Day

    7. Address for correspondence in full with pincode

    Nearest railway station 8. Category (General/OBC/SC/ST)

    9.

    Whether Ex-serviceman? If so, YES/NO Date of entry in Armed forces Date of discharge from Armed forces

    10. Whether PWD ? If so YES/NO Nature of disability

    11.

    Whether employed in Govt. service/PSU ? If so YES/NO

    Name of organization Date of appointment & post held

    12. Academic/Professional Qualifications (Starting from Matriculation or Equivalent Examination)

    Exam passed Board/University Year of Passing Subjects Div & % of Marks

    13. Experience, if any Post Held Pay Scale Nature of duty

    Period Name of Employer From To

    14.

    Language for examination (Hindi/English/Marathi) {applicants applying for the post of Lower Division Clerk have the option of appearing exam in Hindi or English only} [If the column is left blank, it will be presumed to be English]

    15. Only for applicants applying for the post of Lower Division Clerk - Language for Typewriting test (English/Hindi)

    16.

    Only for VH applicants for Lower Division Clerk/Multi-Tasking Staff (refer general condition no.11): Whether you are availing the facility of scribe. If yes, the scribe will be arranged from your side

    YES/NO

    Cont. Pg. 2

  • [Page No.2] DECLARATION

    I ____________________________________________, do hereby declare that all the statements made in this application are true, complete and correct to the best of my knowledge and belief. In the event of any information being found false/incorrect/incomplete or ineligibility being found before or after recruitment test/appointment, my candidature will stand automatically cancelled.

    Place : ___________________ Date : ___________________ Left hand Thumb Impression

    __________________________ Signature of the applicant

    Encl: (1) Admit card format in duplicate (2) Attested copies of qualification (3) Proof for Date of Birth (4*) Attested copy of caste certificate (5*) Attested copy of Discharge certificate (6*) Attested copy of PWD certificate (7*) IPO No. ____________________ dated _____________ (* strike off whichever is not applicable)

    Declaration for OBC candidates only **

    I _______________________ son/daughter of Shri. ____________________ resident of Village/Town/City ___________________ District ________________ State ___________ hereby declare that I belong to the ___________________community which is recognized as a backward class by the Government of India for the purpose of reservation in services as per orders contained in Department of Personnel & Training Office Memorandum No. 36012/22/93-Estt (SCT) dated 08.09.1993. It is also declared that I do not belong to persons/sections (Creamy layer) mentioned in column 3 of the Schedule to the above referred Office Memorandum. Date :_____________________ _________________________

    Signature of the applicant

    Undertaking for Ex-Servicemen only **

    I understand that, if selected on the basis of the recruitment/examination to which this application relates, my appointment will be subject to my producing documentary evidence to the satisfaction of the appointment authority that I have been duly released/retired/discharged from the armed forces and that I am entitled to the benefits admissible to ex-servicemen in terms of Ex-Servicemen (Re-employment in Central Civil Services and Posts) Rules, 1979, as amended from time to time. 2. I also understand that I shall not be eligible to be appointed to a vacancy reserved for Ex-servicemen in regard to the recruitment covered by this examination, if I have at any time prior to such appointment, secured any employment on the civil side (including Public Sector Undertaking, Autonomous bodies/Statutory bodies, Nationalized banks etc) by availing concession of reservation of vacancies admissible to Ex-servicemen.

    Date :_____________________ _________________________

    Signature of the applicant

    ** - strike off whichever is not applicable

  • ADMIT CARD

    (To be enclosed in duplicate) To be filled in by the candidate in capital letters only

    Name of the candidate ___________________________________

    Father’s name ____________________________________

    Address for communication ______________________________

    ______________________________________________________

    ______________________________________________________ Post applied for : __________________________________________ Caste (UR/SC/ST/OBC) ____________________ Category (PWD/XSM) _________________

    _____________________ (Signature of candidate)

    FOR OFFICE USE ONLY

    Roll No.

    Date and time of Exam

    Venue

    Factory seal _______________________________

    Signature of issuing authority

    Please paste your recent self attested passport size photograph

  • …..2/-

    आवेदन का प सेवा म, महा बंधक मशीनी औजार आ द प नमाणी, अ बरनाथ

    _________________________ पद हेतु आवेदन

    संदभ: रोजगार समाचार म दनांक ____________ का व ापन सं या ___________

    वत: स या पत वतमान पासपोट आकार का फोटो ाफ चपकाए ( टैपल नह ं कर।)

    1. नाम (एस .एस.सी .माणप ानुसार )

    2. पता/प त का नाम

    3. रा यता

    4. धम

    5. ज म त थ (इ वी सन म)

    दन म हना साल 6.

    आवेदन क अं तम त थ के दन उ

    वष माह दन

    7. प ाचार हेतु पनकोड स हत पूरा प ता

    नकटतम रे वे टेशन 8. ेणी (सामा य/ओ .बी.सी /एस .सी /एस .ट )

    9.

    या आप भूतपूव सैनक ह ? य द हॉ हॉ/ंनह ं

    सश सेनाओं म वेश क त थ

    सश सेनाओं से सेवा मुि त क त थ

    10. या पी .ड लु.डी ह। य द हॉ ं हॉ/ंनह ं

    अपंगता का व प

    11.

    या शासक य सेवा/पी.एस.य.ू म सेवारत ह? य द हॉ हॉ/ंनह ंसंगठन का नाम

    नयिु त त थ तथा पदनाम

    12. शै णक/ यवसा यक अहताएं (मै कुलेशन या समतु य से शु करते हु ए)

    उ तीण पर ा बोड/ व व व यालय पर ा उ तीण का वष वषय ेणी एवं तशत

    13. अनुभव, य द हो पद वेतनमान काय का कार

    अव ध नयो ता का नाम

    से तक

    14. पर ा का मा यम ( ह द /अं ेजी/मराठ ) { अवर ेणी ल पक पद के आवेदनकताओं के लए पर ा का मा यम ह द अथवा अं ेजी वक प उपल ध है} )र त छोड़ने क ि थ त म इसे अं ेजी माना जाएगा (

    15. अवर ेणी पद के लए आवेदन करने वाले उ मीदवार के लए टंकण पर ा हेतु भाषा (अं ेजी/ ह द )

    16. अवर ेणी पद मि ट टाि कंग टाफ के पद के लए ह . एच आवेदनकाता हेतु (सामा य शत म सं 11 का अवलोकन कर ) या आप ल खत पर ा म लेखक क सहायता लग य द हॉ तो लेखक क यव था खुद करगे ।

    हॉ/ंनह ं

  • घोषणा

    म ै ____________________________________________, यह घोषणा करता/करती हू ँ क इस आवेदन म सभी ववरण मेर सव तम जानकार एवं व वास म स य ,पूण तथा सह है । नयुि त पर ा / नयुि त के पूव या बाद म य द कोई जानकार अस य/गलत/अपूण या अपा पाए जाने पर मेर अ यथता वत: नर त होगी ।

    थान : ___________________

    दनांक : ___________________

    बाएं अंगूठे का नशान

    __________________________

    आवेदक के ह ता र

    संल न: (1) वेश प (दो तय म) (2) अहता माणप क स या पत त (3) ज म त थ माण (4*) जा त माणप क स या पत त (5*) सेवा मुि त माण प क स यापत त (6*) पी .ड लु.डी . क स या पत त(7*) आई पी ओ सं या ____________________ दनांक _____________ (* जो लागू न हो काट द)

    केवल अ य पछड़े वग के उ मीदवार के लए **

    म ____________________ आ मज/आ मजा _______________ ाम/कसबा/शहर ____________ िजला _________ रा य ____________ का/क नवासी एत दारा घोषणा करता/करती हू ँ क म _________ समुदाय का/क हू ँ िजसको का मक एवं श ण वभाग के दनांक 08.09.1993 के कायालय ापन सं या 36012/22/93-Estt(SCT) के अनुसार नौक रय म आर ण हेतु भारत सरकार दारा पछड़े वग क सूची म अनुसू चत कया गया है । म यह भी घोषणा करता/करती हू ँ क म उपरो त व णत कायालय ापन दनांक 08.09.1993 क अनुसूची के कालम म उ ले खत यि त/ वभाग )मीलेयर (का /क सद य नह ं हू ँ ।

    दनांक ___________________ ___________________ आवेदक के ह ता र

    भूतपूव सै नक के दारा दया जाने वाला वचनप **

    म समझता हू ँ क य द इस पर ा के आधार पर मेरा चयन हो जाता है तब उस ि थ त म मेर नयुि त मेरे नयो ता क संतुि ट के लए मेरे दारा यह द तावेज तुत करने तक अ थाई होगी क मुझे सश सेना से सेवा मु त कर दया गया है और म भूतपूव सै नक )के य से वाओं एवं पद म पुन -रोजगार (नयम 1979 ,तथा

    बाद म समय-समय पर कए गए संशोधन के तहत भूतपूव सै नक को ा त होने वाले लाभ को पाने का हकदार हू ँ।

    2. म यह भी समझता हू ँ क म इस पर ा दारा होने वाल भत के संबंध म भूतपूव सै नक के लए आर त रि त के तहत नयु त होने के लए यो य नह ं रहू ंगा ,य द इस कार क नयुि त के पहले कसी भी समय मैन

    असै य सेवा )िजसम सावज नक उप म ,वाय त सं थान , सवधा नक सं था रा यकृत बक इ या द (म भूतपूव सै नक को मलने वाल रि त के आरक ◌्षण क छूट का लाभ लेकर कसी भी कार का रोजगार ा त कर लया

    हो ।

    दनांक ___________________ ___________________ आवेदक के ह ता र

    **- य द लागू न हो तो काट दे ।