goodway machine corp. - cnc plasma & · pdf filegts-200 / 260 work range gts-200 / 260...
TRANSCRIPT
GTS Twin Spindles & Turrets CNC Turning Centers
SERIES
GOODWAY MACHINE CORP.
Accessories & Applications
Speci�cations
GTS ser ies Twin Turrets
GTS series Twin Turrets
General Features
AVAILABLE
T WIN SPINDLES & TURRE TS CNC TURNING CENTER
Designed for simultaneous turning of work pieces within one
machines setup. The GTS series incorporates twin-opposing
spindles and turrets with C-axis and live tooling capabilities.
This con�guration allows both turrets to work simultaneously
with one turret at each spindle achieving ultimate e�ciency.
Twin spindles, twin standard turrets.
Twin spindles, one live tooling turret & one standard turret.
Twin spindles, twin live tooling turrets.
Twin Y-axis ( GTS-200 series only )
C-axis or 1 deg. indexing spindles.
( GTS-150MMX series model shown. )
SPECIFICATION
1
2
General Features
Accessories & Applications
Speci�cations
GTS series Twin Turrets
General Features
The twin 12 stations turrets
provides high speed indexing
of 0.2 second from station to
station. 1 step indexing
further provides faster
cycling times. Live tooling
turret options enable the use
of 6 live tool positions on
each turret.
MACHINING CAPABILITIES
Simultaneous turning on
both spindles. The second
spindle may be used to
support longer work pieces
during turning with the
spindle synchronize RPM
feature. The feature is also
used when parting bar work.
When the machine is
incorporated with full C-axis
and live tooling,
SPINDLES
Fanuc αPi series wide
range spindle motors power
both spindles and can be
programmed for synchronized
turning. The wide range
constant output spindle
motors provide full power
cutting throughout most of
the spindle speed range. Pi
type motors also have faster
acceleration and deceleration
to cut down cycle times and
torque rating are twice the
output of standard αi
series motors.
the GTS machines are able to
perform the following: OD &
face milling, OD & o�-center
face drilling.
C B A
GTS-150
GTS-200
GTS-260
Spindle 1/2
Spindle 1/2
Spindle 1/2
51
66
76
50
65
75
43
52
66
A B C
A : SpindleB : Draw tube ODC : Draw tube ID
( Casting structure of GTS-260XY series model shown )
4535
85
60
9010
Ø168
SpindleØ180
15555
25
60155
10120
X-axis stro
ke (X1 & X2)
X-axis stroke
6" chuck
6" chuck
Max. Turning Dia.
Min: 22.5
120
25
155
96 +Z2
5195200
+X2
5175
180
40
+X1
+Z1
10
500 Spin
dle
C1-axisC2-axis
Z1-axis stroke
Z2-axis stroke
X1 &
X2
Hub
117
3.7 Kw ( 15 min. )
40001500
15000
5
10
2000
15
20
24
2
6000 8000
1
2.2 Kw ( con. )2.2
3
3.7
14
25 4
Torque Output
Constant OutputConstantTorque
8000 rpm6000 rpm0 750
8
5.54
2
( Kw )
0
20
40
80
100
Torque
7.5 Kw ( 30 min. )
5.5 Kw ( con. )60
7.5
Constant OutputConstantTorque
Output
GTS-150 Tooling System
GTS-150 Interference DiagramGTS-150 Work Range
GTS-150 Spindle Output GTS-150 Live Tooling Output
12 ST.
Ø25
Ø25
90
150
62.5
27.5
Unit : mm
( N-m )( Kw )( N-m )
Ø25
Ø25
ER20
Ø20
(CCW)(CW)
(CCW)
(CCW)
(CW) O.P
(CW) O.P
CX-4595
CX-4506
CX-4598
CX-4592
CX-4593
CX-4583
CX-4582
CX-4597CX-4594
CX-4507A
GTS-200 / 260 Interference DiagramGTS-200 / 260 Work Range
GTS-260 Spindle OutputGTS-200 Spindle Output GTS-200 / 260 Live Tooling Output
X-axis stroke
X-axis stroke
Max. Turning Dia.
10" chuck
8" chuck
160
190Max. : 125
Ø238
Ø268
45
4050
Ø280
85
10
20
Ø254
Ø210
Ø32
Ø32
95
Ø32
105
140190
10
40
300
250238
150175
100
50
0
15
1110
5
48006002000600 4000 4800rpm
200
( 8" Chuck )
Constant torque Constant output
Torque Output
15 Kw ( 30 min. )
11Kw ( con. )
0
100
500500
2000 4000rpm30004000
400
300
200211
286
1000
15
1110
5
( 10" Chuck )Torque Output
Constant outputConstant torque
15 Kw ( 30 min. )
11 Kw ( con. )
Torque Output
4
Torque ( con. )
Constant torque
0
5
1500
15001000
1415
2325
30
3000
Constant output
( Live Tooling Output )
Torque ( 15 min. )
200045004500rpm
1
3.7 Kw ( 15 min. )
2.2 Kw ( con. )2.22
3.7
3
10
20
4000
944
195500 (10")570 (8")
Z-axis stroke
X-ax
is s
trok
e10
175
2016
0
+X1
27010
+Z1
5
209+Z2
+X2
C1-axis C2-axis
190
260
Max:145
8" Chuck
10" Chuck
8" Chuck
10" Chuck
3
4
GTS-200 /260 Tooling System Unit : mm
12 ST.
60
( Kw )( N-m ) ( Kw )( N-m ) ( Kw )( N-m )
70
□25
□25
Ø32
(CCW)
(CCW)
(CCW)
(CW)
(CW) O.P
ER25
CB-4507
CB-4595
CB-4592
CB-4593
CB-4583
CB-4582
CB-4594
CB-4596
CB-4597
Accessories & Applications
Speci�cations
Accessor ies & Appl icat ions
GTS series Twin Turrets
General Features
1. Small Parts
H1 Cut O� H2 Workpiece Support
• Synchronization cut off. • Spindle stop.• H2 advance with chuck open.• Chuck close.• Synchronization cut off.• H2 retract after cut off.
H1 Load Bar H2 Turn / Mill Operation• Spindle stop.• Collect chuck open.• Load Bar.• Collect chuck close.• Spindle run.• O. D. and Thread machining.
• Turning / drilling.• Milling.• Eject to parts catcher.
C-axis
2. Long Parts
H1 Drilling H2 Workpiece Support• C-axis brake.• Drilling.• Cut off workpiece.
• Chuck hold workpiece.
H1 Load Bar H2 Turn / Mill Operation• Collect chuck open.• Load Bar.• Collect chuck close.• O. D. and Thread machining.
• End face and O. D. machininig.• Finished.
3. Casting / Forge Parts
H1 Workpiece Support H2 Workpiece Support
• Workpiece finished in H1.• Spindle stop / chuck open.• Load new workpiece / chuck close.
• Spindle stop.• H2 advance with chuck open.• H2 retract after cut off.
H1 Turn operation H2 Turn / Drill Operation
• Synchronization.• O. D. machining.• Bore machining.
• END face and O. D. machining.• Drilling• Finished.
RENISHAW HPRA TOOLSETTER
TURRET #1 TURRET #2
H1 H2
TURRET #1 TURRET #2
TURRET #1 TURRET #2 TURRET #1 TURRET #2
TURRET #1 TURRET #2 TURRET #1 TURRET #2
H1 H2
H1 H2 H1 H2
H1 H2 H1 H2
PARTS CONVEYOR
GTS-200 series Live Tooling Turrets
Specifications
Optional Twin Y-axis ( GTS-200 series only )
Machine Layout
MODEL GTS-150 GTS-200 / 260
5
6
Specifications
Ø 180 mm180 mm180 mmØ 42 mm
60 ~ 6,000 rpmDirect-coupled 1:1 pulleys
5.5 / 7.5 Kw ACØ 51 mmØ 80 mmA2-5 ( 6" )500 mm
12 Station x 2
155 mm180 mm500 mm
15 m/min.36 m/min.
1.6 Kw AC Absolute1.6 Kw AC Absolute
linear way□ 20 mm ( 3/4" )Ø 25 mm ( Ø1" )13 mm / ER 20Ø 42 x 130 mm
140 L
2,450 x 1,700 x 1,830 mm6,000 Kg
Ø 280 mm200 mm280 mm
Ø 51 / 65 mm48 ~ 4,800 rpm / 40 ~ 4,000 rpm
Direct-coupled 3:1 pulleys11 / 15 Kw ACØ 66 / 76 mm
Ø 100 / 120 mmA2-6 ( 8" ) / A2-8 ( 10" )
700 mm12 Station x 2
190 mm270 mm740 mm
20 m/min.24 m/min.
3 Kw AC Absolute3 Kw AC Absolute
Box way□ 25 mm ( 1" )
Ø 32 mm16 mm / ER 25Ø 65 x 160 mm
150 L
3,030 x 1,805 x 1,970 mm7,800 Kg
Accessories & Applications
Speci�cations
GTS series Twin Turrets
General Features
GTS-150 : 2,450
GTS-150 : 3,285
GTS
-150
: 1,
830
GTS-150 :1,895
GTS-150 : 1,700
GTS
-150
: 88
8
990GTS-200/260 : 3,030
GTS
-200
/260
: 98
2
GTS-200/260 : 3,865
GTS
-200
/260
: 1,
970
GTS-200/260 : 1,805
GTS-200/260 : 2,015
Max. turning diameterMax. turning lengthMax. swing over coverBar capacitySpindle speed rangeSpindle drive systemSpindle motor ( Max. rating )Hole through SpindleSpindle bearing diameterSpindle noseHead 2 slide travelTurretsTurret index timeLive tooling stations*Live tooling drive motor*Live tooling RPMMax. X1/ X2 travelMax. Z1 travelMax. Z2 travelX1 / X2 rapid traverse rateZ1 / Z2 rapid traverse rateX-axis servo motorsZ-axis servo motorsSlide way type (All axes)Tool size squareTool size roundLive tooling shaft diameter*Part catcher capacity* D x LCNC controlVoltageHydraulic tank capacityCoolant tank capacityCoolant PumpsMachine dimensions L x W x HApprox. machine weight
FANUC 18i -TB
AC 200 / 220 +10% to - 15% 3 Phase
50 L
1/2 HP grundfos pump x 2 ( 3.8 Bars/ 55 PSI )
0.2 sec. / adjacent6 Stations
2.2 / 3.7 Kw ACAxial 4,000 rpm, radial 4,000 rpm
Unit : mm
Y-ax
is :
2,15
0
Max. turning diameterMax. X-axis travelMax. Y-axis travelX / Y axes rapidsSlide way typeFeed ratesX-axis servo motorY-axis servo motorX-axis ball screw Ø / pitchY-axis ball screw Ø / pitchX / Y axes thrust ( Con. )
280 mm220 mm
120 mm = ± 6020 / 20 m/min.
Box way1 ~ 4,800 mm/min.4 Kw AC Absolute
1.6 Kw AC AbsoluteØ 36 mm / pitch 8Ø 32 mm / pitch 61,763 Kg / 855 Kg
*Optional
Copyr ight 2011 by Goodway Machine Corp. Al l r ight reservedG-GTS SERIES-EN-F-20110222
No.589, Chengyang Road,Xiang Cheng Economic Development District Suzhou City, Jiangsu, ChinaTEL : + 86-512-6576-3699TEL : + 86-512-6576-7299Website : www.goodwaycnc.com.cnE-mail : [email protected]
GOODWAY MACHINE CORP.GOODWAY (SUZHOU) MACHINE CORP.
No.13, 5Th Road,Taichung Industrial Park,Taichung City, 407, Taiwan, R.O.C.TEL : + 886-4-2359-1226Website : www.goodwaycnc.comE-mail : [email protected]
No. 38, Keyuan Road, Central Taiwan Science Park.Taichung, Taichung City, 407, Taiwan, R.O.C.TEL : + 886-4-2463-6000TEL : + 886-4-2463-9600
Headquarters :
Central Taiwan Science Park Branch :