gigarackgigamedia.se/produktfiler/ggm golvskåp gigarack 250.pdf · 2012. 8. 16. · 2 rÉfÉrence...
TRANSCRIPT
-
GIGARACK 250 SERIES
NEW
-
2
GIGARACK 250 SERIES
f Anodized aluminium frame structure that can be disassembled
f 230% stronger than a conventional steal frame and 3 times lighter
f 1200 kg of load capacity tested up to 2000 kg
f Excellent finish
f Key locks for all doors and panels
f Large range of accessories
f System designed to make cables and cords more manageable
f Suitable solutions for Datacenters (Hot/Cold corridor concept for example)
f Possibility to develop tailor-made solutions for all projects
Meeting your requirements !
-
3
It is very important for a cabinet, es-pecially in server configuration, to beable to support heavier and heavierloads, whilst keeping in mind the hi-gher standards of equipment.
Ending up being disadvantaged due toan admissible load which is too weakis out of the question, as is having acabinet which is going to rock whensupporting a load.
This frame, like the cabling and servercabinet version, is also used for ourHot / Cold Corridor concept speci-fically developed for Datacentersmarket.
Six years ago we tested and selected the aluminum frame for our cabinets. Back then, it was important for us to offer you a reliable solution by anticipating the integra-tion needs for the equipment of the future.
In a fast-growing market innovation is a daily challenge allowing us to offer the products of tomorrow now …
Thank you for your confidence in us. The GigaMedia team
including new split side panels for the server range (see page 11). They are lighter and smallerto enable easy handling.
Handling panels with a height of 2 meters and a width of 1 or 1.20 meters can be very tricky. That’swhy we have created the GigaRack S250, which offers a new design with 2 smaller panels whichmakes them easier to manage. With this new design, two supports between the front and therear frame vertical profiles are added, providing unmatched rigidity.
On the cabling range (see page 3), we have replaced the 2 fixing hooks inside the panel by2 latches outside the panel.
This system is easier to fix as you just push the panel against the frame and fix it by using thelatches. You don’t need to lift the panel anymore to put it on the hooks.
Finally, you still have to use the key locks on the top of the panels to secure the panel lockingsystem.
An anti-fingerprint-friendly paint will be used for both ranges to avoid stains and to improvedesign.
This catalog contains the latest developments in the range,
-
2
RÉFÉRENCE DESCRIPTION
GGM AL2666G Floor standing cabinets 19’’ GIGARACK type 250 26U 600 x 600 - GreyGGM AL2666N Floor standing cabinets 19’’ GIGARACK type 250 26U 600 x 600 - BlackGGM AL3266G Floor standing cabinets 19’’ GIGARACK type 250 32U 600 x 600 - GreyGGM AL3266N Floor standing cabinets 19’’ GIGARACK type 250 32U 600 x 600 - BlackGGM AL3966G Floor standing cabinets 19’’ GIGARACK type 250 39U 600 x 600 - GreyGGM AL3966N Floor standing cabinets 19’’ GIGARACK type 250 39U 600 x 600 - BlackGGM AL4266G Floor standing cabinets 19’’ GIGARACK type 250 42U 600 x 600 - GreyGGM AL4266N Floor standing cabinets 19’’ GIGARACK type 250 42U 600 x 600 - BlackGGM AL4268G Floor standing cabinets 19’’ GIGARACK type 250 42U 600 x 800 - GreyGGM AL4268N Floor standing cabinets 19’’ GIGARACK type 250 42U 600 x 800 - BlackGGM AL4286G Floor standing cabinets 19’’ GIGARACK type 250 42U 800 x 600 - GreyGGM AL4286N Floor standing cabinets 19’’ GIGARACK type 250 42U 800 x 600 - BlackGGM AL4288G Floor standing cabinets 19’’ GIGARACK type 250 42U 800 x 800 - GreyGGM AL4288N Floor standing cabinets 19’’ GIGARACK type 250 42U 800 x 800 - Black
SPECIFICATIONS
• Type : Cabling • Frame : Aluminium, screw assembly
model• 19” mounting profiles : 2 adjustable
depth 19’’ mounting profiles (with 9,5 x9,5 mm cage nut size holes)
• Front door : Reversible security frontglass door with side profiles, can beopened up to 190°, locked by usingswing handle with key lock (N°333)
• Rear panel : Removable, locked byusing latches and key locks (N°333)
• Side panels : Removable, locked byusing latches and key locks (N°333)
• Support : Adjustable feet • Color : RAL 7035 or RAL 9005 • IP : IP 20 • Load capacity : 1200 kg
SUMMARY
CABLING & SERVERACCESSORIES
SERVERACCESSORIES
CABLINGVERSION
CABLING ACCESSORIES
SERVER VERSION
P 03
P 04
P 10
P 12
P 16
-
3
GIGARACK 250 SERIES
CABLING VERSION
GGM AL4288G
-
4
GIGARACK 19” 250 SERIESCABLING VERSION
RÉFÉRENCE DESCRIPTION
GGM ALMON26U Set of 2 rear 19’’ mounting profiles 26 UGGM ALMON32U Set of 2 rear 19’’ mounting profiles 32 UGGM ALMON39U Set of 2 rear 19’’ mounting profiles 39 UGGM ALMON42U Set of 2 rear 19’’ mounting profiles 42 U
SPECIFICATIONS
• Color : Zinc coated • Fixing position : on lateral top and
bottom rails
• 9,5 x 9,5 mm cage nut holes
Allow accessories to be fixed to 4 fixation points.
RÉFÉRENCE DESCRIPTION
GGM ALEF400G 19’’ Fixed shelf 1 U - depth 400 mm - GreyGGM ALEF400N 19’’ Fixed shelf 1 U - depth 400 mm - BlackGGM ALEF600G 19’’ Fixed shelf 1 U - depth 600 mm - GreyGGM ALEF600N 19’’ Fixed shelf 1 U - depth 600 mm - Black
SPECIFICATIONS
• Color : RAL 7035 or RAL 9005 • Height in U : 1 U • Width : 19” • Useful width : 430 mm • Useful depth :
400 mm (for cabinets with depths of 600 mm and 800 mm)
600 mm (for cabinets with a depth of 800 mm only)
• Fixing position : on the front and rear19’’ mounting profiles
• Load capacity : 100 kg • Don’t forget the set of 2 rear 19’’
mounting profiles for fixing
RÉFÉRENCE DESCRIPTION
GGM ALEG400G 19’’ Sliding shelf 1 U - depth 400 mm - GreyGGM ALEG400N 19’’ Sliding shelf 1 U - depth 400 mm - BlackGGM ALEG600G 19’’ Sliding shelf 1 U - depth 600 mm - GreyGGM ALEG600N 19’’ Sliding shelf 1 U - depth 600 mm - Black
SPECIFICATIONS
• Color : RAL 7035 or RAL 9005• Height in U : 1 U• Width : 19’’• Useful width : 410 mm• Useful depth :
400 mm (for 600 and 800 mm depth cabinets)600 mm (for 800 mm depth cabinets only)
• Fixing position : On the front and rear19’’ mounting profils
• Load capacity : 35 kg• Don’t forget the set of 2 rear 19’’
mounting profiles for fixing
19'' SLIDING SHELVES
For integration of equipment without 19" fixing supports
RÉFÉRENCE DESCRIPTION
GGM ALSUP400 Set of 2 19” mounting supports for cabinet depth 600 mmGGM ALSUP600 Set of 2 19” mounting supports for cabinet depth 800 mm
SPECIFICATIONS
• Color : Zinc coated• Fixing position : On the front and rear
19’’ mounting profils
• Load capacity : 80 kg• Don’t forget the set of 2 rear 19’’
mounting profiles for fixing
19'' SUPPORTS
To support the 19" equipment
REAR 19'' MOUNTING PROFILES
19'' FIXED SHELVES
For integration of equipment without19" fixing supports
-
5
GIGARACK 19” 250 SERIESCABLING VERSION
RÉFÉRENCE DESCRIPTION
GGM AL4VENG Fan unit (4 fans) - GreyGGM AL4VENN Fan unit (4 fans) - Black
SPECIFICATIONS
• Color : RAL 7035 or RAL 9005• Fixing position : On the top of the cabinet
replacing the pre-cut plates• Airflow : 304 m3/h• Quantity of fans : 4
• Cord Connection : H05VVF 2 meters - 3 x 1.5 mm² with moulded schuko socket 16 A - 250 V
• Operation voltage : 220 - 240 V• Thermostat : Yes
To ensure good heat dissipation.
RÉFÉRENCE DESCRIPTION
GGM ALB Brush joints
Allow easy management of cables across the cabinet top while preventing entryof dust and dirt.
RÉFÉRENCE DESCRIPTION
GGM ALVCO26U Cable tray 26 UGGM ALVCO32U Cable tray 32 UGGM ALVCO39U Cable tray 39 UGGM ALVCO42U Cable tray 42 U
SPECIFICATIONS
• Color : Zinc coated• Width : 260 mm• Fixing position : Between the top rail
and bottom rail frame (rear or side)
• We highly recommend velcro loop tapefor good maintenance of cables (GGMBBR205MN: Velcro roller length 5 m,width 20 mm, black color).
CABLES TRAY
RÉFÉRENCE DESCRIPTION
GGM ALVCM42UG Set of 2 vertical cable organizers - GreyGGM ALVCM42UN Set of 2 vertical cable organizers - Black
SPECIFICATIONS
• Color : RAL 7035 or RAL 9005• Height in U : 42 U• Width : 100 mm• Depth : 80 mm• Fixing position : On the front vertical
frame rail• Locking system
• Fit with 42 U floor standing cabinets witha width of 800 mm only
FAN UNITS BRUSH JOINTS
Allow easy management ofcables inside the cabinet
Allow easy management of cables inside the cabinet
VERTICAL CABLES ORGANIZERS
SPECIFICATIONS
• Color : Black• Width : 350 mm• Depth : 60 mm• Fixing position : On the top or bottom
of the floor standing cabinet replacingpre-cut plates
(the floor standing cabinets with a widthof 600 mm have 1 rear pre-cut plate andthe floor standing cabinets with a widthof 800 mm have 1 rear pre-cut plate andone on each side)
-
6
GIGARACK 19” 250 SERIESCABLING VERSION
RÉFÉRENCE DESCRIPTION
GGM AL5ABV Set of 5 vertical cable management rings
SPECIFICATIONS
• Color : Black• Width : 65 mm (inside)• Depth : 65 mm (inside)
• Fixing position : On the 19'' mounting profils• Fit with floor standing cabinets with
a width of 800 mm only
VERTICAL CABLES MANAGEMENT RINGS
RÉFÉRENCE DESCRIPTION
GGM PSC5 Set of 5 cable management supports
SPECIFICATIONS
• Color : RAL 9005• Height in U : 1 U• Width : 100 mm• Fixing position : On the 19'' mounting
profiles
• We highly recommend velcro loop tapefor good maintenance of cables (GGMBBR205MN: Velcro roller length 5 m,width 20 mm, black color).
• Fit with floor standing cabinets with awidth of 800 mm only
SUPPORTS FOR CABLE MANAGEMENT
Allow easy management ofcables inside the cabinet
Allow easy management of cables inside the cabinet
RÉFÉRENCE DESCRIPTION
GGM ALESC600 Set of 2 cable supports 600 mmGGM ALESC800 Set of 2 cable supports 800 mm
SPECIFICATIONS
• Color : Zinc coated• Fixing position : Between vertical
frame rails (widthwise or depthwise)
• We highly recommend velcro loop tapefor good maintenance of cables(GGM BBR205MN: Velcro roller length5 m, width 20 mm, color : black).
RÉFÉRENCE DESCRIPTION
GGM ALPF66G Bottom plate for 600 x 600 Cabinet - GreyGGM ALPF66N Bottom plate for 600 x 600 Cabinet - BlackGGM ALPF68G Bottom plate for 600 x 800 Cabinet - GreyGGM ALPF68N Bottom plate for 600 x 800 Cabinet - BlackGGM ALPF86G Bottom plate for 800 x 600 Cabinet - GreyGGM ALPF86N Bottom plate for 800 x 600 Cabinet - BlackGGM ALPF88G Bottom plate for 800 x 800 Cabinet - GreyGGM ALPF88N Bottom plate for 800 x 800 Cabinet - Black
SPECIFICATIONS
• Color : RAL 7035 or RAL 9005 • Fixing position : On the cabinet bottom
Used to close the bottom of the cabinet
CABLES SUPPORTS
BOTTOM PLATES
Allow easy management of cables inside the cabinet
-
7
GIGARACK 19” 250 SERIESCABLING VERSION
PLINTHS
RÉFÉRENCE DESCRIPTION
GGM ALSOC66G Plinth 600 x 600 - GreyGGM ALSOC66N Plinth 600 x 600 - BlackGGM ALSOC68G Plinth 600 x 800 - GreyGGM ALSOC68N Plinth 600 x 800 - BlackGGM ALSOC86G Plinth 800 x 600 - GreyGGM ALSOC86N Plinth 800 x 600 - BlackGGM ALSOC88G Plinth 800 x 800 - GreyGGM ALSOC88N Plinth 800 x 800 - Black
SPECIFICATIONS
• Color : RAL 7035 or RAL 9005• Height : 100 mm
• Fixing position : Under the floor standingcabinet replacing the adjustable feet
Allow additional space under the cabinet. Thanks to the removable covers at the front and rear you can obtain more spacefor extra cables.
RÉFÉRENCE DESCRIPTION
GGM ALR2X2 Caster set
SPECIFICATIONS
• Height : 70 mm• Fixing position : Under the floor standing
cabinet replacing the adjustable feet
• Load capacity : 600 kg / 4 casters• 2 swivelling and 2 with locking system
For easy handling of the cabinet
RÉFÉRENCE DESCRIPTION
GGM ALKJUXG Juxtaposing kit - GreyGGM ALKJUXN Juxtaposing kit - Black
SPECIFICATIONS
• Color : RAL 7035 or RAL 9005
JUXTAPOSING KITS
Allow to juxtapose two cabinets
RÉFÉRENCE DESCRIPTION
GGM ALMASSE Earthing kit
SPECIFICATIONS
• Color : Green / Yellow
CASTER SET EARTHING KIT
Used to connect all the cabinetparts to the earth
-
8
FRONT COOLERSOLUTION
f Until 60 KW of cooling capacityf No raised floorf Automatic regulationf Modular
SIDE COOLERSOLUTION
-
9
HOT / COLD CONTAINMENTSOLUTION
The hot / cold containment solution prevents the mixing of hot air flow rejected by theservers and the cold air from the air conditioning system used to cool the servers.This system optimises cooling and causes the temperature between the top and bottomracks to be almost identical which, in turn, enables the servers to be used at all rack le-vels (eliminating 75% of breakdowns caused in the top third of the rack, also known ashot spots).This kind of solution allows dissipation of over 10 kW per rack, compared to 5 kW perrack when installed in conventional air-conditioned rooms.This system reduce the air conditioning system consumption between 15 or 20%
ADVANTAGES• Increase of the density of the equipment per rack. • Improved reliability of the equipment thanks to an efficient cooling system.• Energy saving and respect environmental constraints.• Adaptable for all data center size.• Scalable and simple implementation.• Complete solution including monitoring, energy management and access control.• Transparent corridor roof allowing exterior lighting.• Access to corridor by sliding or swivelling door system.
CONSULT YOUR CONECTIS PARTNER TO DEF INE YOUR CONFIGURATION
POWER
MANAGEM
ENT
SER
VE
R
INTE
RFA
CE
CONTROLA C C E S S
GLOBALSOLUTION
How is it done ? f Racks are positioned in two rows facing each other with a corridor in the middle.f The roof of the corridor is closed off using polycarbonate and a sliding or swivelling door
system is used on the sides.f The air conditioning is then channeled under the false floor of the room and goes up
through the perforated floor tiles which are positioned between the two racks.f The air conditioning is thus 100% channeled to the servers, preventing a flow
of hot air being rejected at the back of the servers.
DATA CENTERSOLUTIONS
-
CARACTÉRISTIQUES
• Type : Server• Frame : Aluminium, screw assembly• 19” mounting profiles : 2 adjustable
depths 19’’ mounting profiles (9,5 x 9,5 mmcage nut size holes)
• Side panels : Removable, locked byusing latches and key locks (N°333)
• Support : Adjustable feet• Depth : 1000 or 1200 mm• Color : RAL 9005• Load capacity : 1200 kg
FRONT DOOR :
TYPE A AND BReversible single perforated door, can beopened up to 190°, locked by using swinghandle with key lock (N°333) with 3 locks
TYPE CReversible double perforated door, can beopened up to 190°, locked by using swinghandle with key lock (N°333) with 3 locks
REAR DOOR :
TYPE A Reversible single perforated door, can beopened up to 190°, locked by using swinghandle with key lock (N°333) with 3 locks
TYPE B AND C
Reversible double perforated door, can beopened up to 190°, locked by using swinghandle with key lock (N°333) with 3 locks
A server needs a supply of cold air in the front to optimise dissipation of produced heat.The heated air is then expelled at the rear of the server. To accompany this process of cooling, it is essential to have a cabinet equipped with front and rear perforated doors to allow the air flow to circulate thus avoidingany risk of overheating.
EXTENSION CABINETS ARE DELIVERED WITHOUT SIDE PANELS AND WITH JUXTAPOSING KIT
Type A Type B Type CSTANDARD EXTENSION STANDARD EXTENSION STANDARD EXTENSION
Depth 1000 mm26U 600x1000 CONTACT US CONTACT US GGM ALS26610B CONTACT US CONTACT US CONTACT US42U 600x1000 GGM ALS42610A GGM ALS42610AEX GGM ALS42610B GGM ALS42610BEX CONTACT US CONTACT US42U 800x1000 GGM ALS42810A GGM ALS42810AEX GGM ALS42810B GGM ALS42810BEX GGM ALS42810C GGM ALS42810CEX47U 800x1000 GGM ALS47810A CONTACT US GGM ALS47810B CONTACT US CONTACT US CONTACT US
Depth1200 mm42U 600x1200 CONTACT US CONTACT US CONTACT US CONTACT US CONTACT US CONTACT US42U 800x1200 GGM ALS42812A GGM ALS42812AEX GGM ALS42812B GGM ALS42812BEX CONTACT US CONTACT US47U 800x1200 GGM ALS47812A CONTACT US GGM ALS47812B CONTACT US CONTACT US CONTACT US
10
GIGARACK 19” 250 SERIESSERVER VERSION
REAR
FRONT
REAR
FRONT
REAR
FRONT
BA C
-
11
GIGARACK 250 SERIES
ALSO AVAILABLEIN COLLOCATED CONFIGURATIONS
CONTACT US
UP TO 82% PERFORATION RATE(67% IN STANDARD)
MULTI POINT LOCK
COMPATIBLE WITHALL SERVERS
GGM ALS42610B
SERVERVERSION
-
12
GIGARACK 19” 250 SERIESSERVER VERSION
RÉFÉRENCE DESCRIPTION
GGM ALSEF800N 19’’ Fixed shelf 1 U - depth 800 mm - Black
SPECIFICATIONS
• Color : RAL 9005• Height in U : 1 U• Width : 19”• Useful width : 430 mm• Useful depth :
800 mm (for cabinets with depths of 1000 and 1200 mm)
• Fixing position : On the front and rear19’’ mounting profiles
• Load capacity : 100 kg
19'' FIXED SHELVES
For integration of equipment without 19" fixing supports
RÉFÉRENCE DESCRIPTION
GGM ALSEG800N 19’’ Sliding shelf 1 U - depth 800 mm - Black
SPECIFICATIONS
• Color : RAL 9005• Height in U : 1 U• Width : 19’’• Useful width : 410 mm• Useful depth :
800 mm (for cabinets with depths of 1000 and 1200 mm)
• Fixing position : On the front and rear19’’ mounting profiles
• Load capacity : 35 kg
19'' SLIDING SHELVES
For integration of equipment without 19" fixing supports
RÉFÉRENCE DESCRIPTION
GGM ALSSUP800 Set of 2 19” mounting supports for cabinet with a depth of 1000 mm
SPECIFICATIONS
• Color : Zinc coated• Fixing position : On the front and rear
19’’ mounting profiles
• Load capacity : 80 kg
19'' SUPPORTS
To support 19" equipment
RÉFÉRENCE DESCRIPTION
GGM ALS6VENN Fan unit (6 fans) - Black
SPECIFICATIONS
• Color : RAL 7035 or RAL 9005• Fixing position : On the top of the cabinet,
replacing the pre-cut plates• Airflow : 304 m3/h• Quantity of fans : 6
• Cord connection : H05VVF 2 meters -3 x 1.5 mm² with moulded schukosocket 16 A - 250 V
• Operation voltage : 220 - 240 V• Thermostat : Yes
FAN UNITS
To ensure good heat dissipation.
-
13
GIGARACK 19” 250 SERIESSERVER VERSION
RÉFÉRENCE DESCRIPTION
GGM ALVCO26U Cable tray 26 UGGM ALVCO42U Cable tray 42 U
SPECIFICATIONS
• Color : Zinc coated• Width : 260 mm• Fixing position : Between the top and
bottom rail frame (rear or sides)
• We highly recommend velcro loop tapefor good maintenance of cables (GGMBBR205MN: Velcro roller length 5 m,width 20 mm, black color).
CABLE TRAY
RÉFÉRENCE DESCRIPTION
GGM ALVCM42UN Set of 2 vertical cable organizers - Black
SPECIFICATIONS
• Color : RAL 9005• Height in U : 42 U• Width : 100 mm• Depth : 80 mm
• Fixing position : On the front verticalframe rail
• Locking system• Fit with 42 U floor standing cabinets
with a width of 800 mm only
VERTICAL CABLE ORGANIZERS
Allow easy management of cables inside the cabinet Allow easy management of cables inside the cabinet
-
14
GIGARACK 19” 250 SERIESSERVER VERSION
RÉFÉRENCE DESCRIPTION
GGM AL5ABV Set of 5 vertical cables management rings
SPECIFICATIONS
• Color : Black• Width : 65 mm (inside)• Depth : 65 mm (inside)
• Fixing position : On the 19'' mounting profiles• Fit with floor standing cabinets with
a width of 800 mm only
VERTICAL CABLE MANAGEMENT RINGS
RÉFÉRENCE DESCRIPTION
GGM PSC5 Set of 5 supports for cables management
SPECIFICATIONS
• Color : RAL 9005• Height in U : 1 U• Width : 100 mm• Fixing position : On the 19'' mounting
profiles
• We highly recommend velcro loop tapefor good maintenance of cables (GGMBBR205MN: Velcro roller length 5 m,width 20 mm, black color).
• Fit with floor standing cabinets with awidth of 800 mm only
SUPPORTS FOR CABLE MANAGEMENT
Allow easy management of cables inside the cabinet
RÉFÉRENCE DESCRIPTION
GGM ALESC600 Set of 2 cables supports 600 mmGGM ALESC800 Set of 2 cables supports 800 mmGGM ALESC1000 Set of 2 cables supports 1000 mmGGM ALESC1200 Set of 2 cables supports 1200 mm
SPECIFICATIONS
• Color : Zinc coated• Fixing position : Between vertical
frame rails (widthwise or depthwise)
• We recommend velcro loop tape tomaintain the cables (GGM BBR205MN:Velcro roller length 5 m, width 20 mm,black color).
Allow easy management of cables inside the cabinet
RÉFÉRENCE DESCRIPTION
GGM ALB Brush joints
SPECIFICATIONS
• Color : Black• Width : 350 mm• Depth : 60 mm• Fixing position : On the top or bottom
of the floor standing cabinet replacingpre-cut plates
(the floor standing cabinets with a widthof 600 mm have 1 rear pre-cut plate andthe floor standing cabinets with a widthof 800 mm have 1 rear pre-cut plate and1 on each side)
BRUSH JOINTS
Allow easy management of cables inside the cabinet. Allow easy management of cables across the cabinet top while preventing entryof dust and dirt.
CABLE SUPPORTS
-
15
GIGARACK 19” 250 SERIESSERVER VERSION
RÉFÉRENCE DESCRIPTION
GGM ALSPF610N Bottom plate for 600 x 1000 Cabinet - BlackGGM ALSPF810N Bottom plate for 800 x 1000 Cabinet - BlackGGM ALSPF812N Bottom plate for 800 x 1200 Cabinet - Black
SPECIFICATIONS
• Color : RAL 9005 • Fixing position : On the cabinet bottom
BOTTOM PLATES ANTI-SWING PLINTHS
RÉFÉRENCE DESCRIPTION
GGM ALSSAB610N Anti swing plinth 600 x 1000 - BlackGGM ALSSAB810N Anti-swing plinth 800 x 1000 - BlackGGM ALSSAB812N Anti-swing plinth 800 x 1200 - Black
SPECIFICATIONS
• Color : RAL 9005• Height : 100 mm
• Fixing position : Under the floor standingcabinet replacing the adjustable feet
RÉFÉRENCE DESCRIPTION
GGM ALR2X2 Caster set
SPECIFICATIONS
• Height : 70 mm• Fixing position : Under the floor standing
cabinet replacing the adjustable feet
• Load capacity : 600 kg / 4 casters• 2 swivelling and 2 with locking system
CASTER SET
For easy handling of the cabinet
JUXTAPOSING KIT
RÉFÉRENCE DESCRIPTION
GGM ALSKJUXN Juxtaposing kit - Black
SPECIFICATIONS
• Color : RAL 9005
Allows to juxtapose two cabinets
RÉFÉRENCE DESCRIPTION
GGM ALMASSE Earthing kit
SPECIFICATIONS
• Color : Green / Yellow
EARTHING KIT
Used to connect all the cabinetparts to the earth
Used to close the bottom of the cabinet Essential when installing equipment on sliding shelves thus avoiding any risk oftilting the cabinet
-
16
GIGARACK 19” 250 SERIESCABLING & SERVER ACCESSORIES
RÉFÉRENCE DESCRIPTION
GGM ARPLM250 19’’ Fixed shelf 2 U - depth 250 mm - GreyGGM ARPLM250N 19’’ Fixed shelf 2 U - depth 250 mm - BlackGGM ARPLM375 19’’ Fixed shelf 2 U - depth 375 mm - GreyGGM ARPLM375N 19’’ Fixed shelf 2 U - depth 375 mm - Black
SPECIFICATIONS
• Color : RAL 7035 ou RAL 9005• Height in U : 2 U• Width : 19’’• Useful width : 430 mm• Useful depth : 250 ou 375 mm
• Fixing position : On the front 19’’mounting profiles
• Load capacity : 20 kg• Fit on all 19’’ racks
19'' FIXED SHELVES
For integration of non rackable small equipment
19'' SLIDING SHELVES
RÉFÉRENCE DESCRIPTION
GGM EG250 19'' Sliding shelf 2 U - depth 250 mm - GreyGGM EG250N 19'' Sliding shelf 2 U - depth 250 mm - Grey
SPECIFICATIONS
• Color : RAL 7035 ou RAL 9005• Height in U : 2 U• Width : 19’’• Useful width : 410 mm• Useful depth : 250 mm
• Fixing position : On the front 19’’mounting profiles
• Load capacity : 20 kg• Fit on all 19’’ racks
For integration of non rackable small equipment
RÉFÉRENCE DESCRIPTION
GGM ARPO1N 19’’ Blanking panel 1 U - BlackGGM ARPO1G 19’’ Blanking panel 1 U - GrisGGM ARPO2N 19’’ Blanking panel 2 U - BlackGGM ARPO2G 19’’ Blanking panel 2 U - GreyGGM ARPO3N 19’’ Blanking panel 3 U - BlackGGM ARPO3G 19’’ Blanking panel 3 U - GreyGGM ARPO5N 19’’ Blanking panel 5 U - BlackGGM ARPO5G 19’’ Blanking panel 5 U - Grey
SPECIFICATIONS
• Color : RAL 7035 ou RAL 9005• Width : 19’’
• Fixing position : On the front 19’’mounting profiles
• Fit on all 19’’ racks
19'' BLANKING PANELS
Used to close the empty spaces on the 19'' mounting profiles and to channelthe circulation of hot and cold air.
19'' BRUSH PANELS
RÉFÉRENCE DESCRIPTION
GGM ARPBPC1G 19’’ Brush panel 1U - GreyGGM ARPBPC1N 19’’ Brush panel 1U - Black
SPECIFICATIONS
• Color : RAL 7035 ou RAL 9005• Height in U : 1 U• Width : 19’’
• Fixing position : On the front 19’’mounting profiles
• Fit on all 19’’ racks
-
To manage cables in the rack. High capacity: particulary suitable for gathering several cords with a wide diameter.
To manage cables in the rack.
17
GIGARACK 19” 250 SERIESCABLING & SERVER ACCESSORIES
RÉFÉRENCE DESCRIPTION
GGM ARPPCA1G 19’’ Metal ring cable management panel 1U - GreyGGM ARPPCA1N 19’’ Metal ring cable management panel 1U - BlackGGM ARPPCA2G 19’’ Metal ring cable management panel 2U - GreyGGM ARPPCA2N 19’’ Metal ring cable management panel 2U - Black
SPECIFICATIONS
• Color : RAL 7035 ou RAL 9005• Width : 19’’• Fixing position : On the front 19’’
mounting profiles
• Quantity of rings : 5• Section :
35 x 73 mm (H x D) for type 1 U70 x 73 mm (H x D) for type 2 U
• Fit on all 19’’ racks
19'' METAL RINGS CABLES MANAGEMENT PANELS
To manage cables in the rack.
SPECIFICATIONS
• Color : Black• Width : 19’’• Fixing position : On the front 19’’
mounting profiles• Quantity of rings : 4
• Section : 23 x 125 mm (H x D) for type 1 U65 x 125 mm (H x D) for type 2 U
• Fit on all 19’’ racks
19'' HIGH CAPACITY CABLES MANAGEMENT PANELS
RÉFÉRENCE DESCRIPTION
GGM PGCA1N 19'' high capacity cable management panel 1U - BlackGGM PGCA2N 19'' high capacity cable management panel 2U - Black
RÉFÉRENCE DESCRIPTION
GGM 628020100 19'' Duct cable management panel 1UGGM 628020200 19'' Duct cable management panel 2U
SPECIFICATIONS
• Color : Black• Width : 19’’• Fixing position : On the 19’’ mounting
profiles
• Section : 45 x 65 mm (H x D) for type 1 U77 x 65 mm (H x D) for type 2 U
• Fit on all 19’’ racks
19'' DUCT CABLES MANAGEMENT PANELS
To manage cables in the rack.
19'' DUCT CABLE MANAGEMENT PANELS
RÉFÉRENCE DESCRIPTION
GGM PGCC1N 19'' Duct cable management panel 1U
SPECIFICATIONS
• Color : Black• Height in U : 1 U• Width : 19’’
• Fixing position : On the 19’’ mountingprofiles
• Section : 27 x 75 mm (H x D)• Fit on all 19’’ racks
GGM ARPPCA1N
GGM 628020100
GGM PGCA2N
-
18
GIGARACK 19” 250 SERIESCABLING & SERVER ACCESSORIES
RÉFÉRENCE DESCRIPTION
GGM WMPG 19'' Modular cable management panel 1U - GreyGGM WMPN 19'' Modular cable management panel 1U - BlackGGM WMBH Plastic ring (30 x 50 mm)
SPECIFICATIONS
• Color : RAL 7035 or RAL 9005• Height in U : 1 U• Width : 19’’
• Fixing position : On the 19’’ mountingprofiles
• Used with rings or Velcro (optional)• Fit on all 19’’ racks
To manage cables inside the rack.
RÉFÉRENCE DESCRIPTION
GGM WMSBG 19'' Fixed shelf with brush 1 U - GreyGGM WMSBN 19'' Fixed shelf with brush 1 U - Grey
SPECIFICATIONS
• Color : RAL 7035 or RAL 9005• Height in U : 1 U• Width : 19’’• Useful width : 430 mm• Useful depth : 240 mm
• Fixing position : On the 19’’ mountingprofiles
• Fit on all 19’’ racks
RÉFÉRENCE DESCRIPTION
GGM ART3V98535 19’’ fan units (3 fans)GGM ART6V98545 19’’ fan units (6 fans)
SPECIFICATIONS
• Color : RAL 7035• Height in U : 1 U• Width : 19''• Fixing position : On the 19'' mounting
profiles
• Airflow : up to 160 m3/h• Operation voltage : 220 - 240 V• Fit on all 19'' wall mounted and floor
standing cabinets
19'' FAN UNITS
To ensure good heat dissipation inside the wall mounted or floor standing cabi-nets
RÉFÉRENCE DESCRIPTION
GGM TG400G 19'' drawer 2 U - GreyGGM TG400N 19'' drawer 2 U - Black
SPECIFICATIONS
• Color : RAL 7035 or RAL 9005• Height in U : 2 U• Width : 19’’• Useful width : 380 mm• Depth : 400 mm• Fixing position : On the front and rear
19’’ mounting profiles
• Perforation : Yes• Load capacity : 40 kg• Key locking system• Provide the rear 19’’ monting profils for
fixation• Fit on all 19’’ floor standing cabinets
19'' DRAWERS
To store documents (manuals, wiring diagrams ...) or a laptop in a 19'' rack.
19'' MODULAR CABLE MANAGEMENT PANELS 19'' FIXED SHELVES WITH BRUSH
GGM WMPG
GGM WMBH
Designed to allow you to storeyour excess of patch cables andcords, resulting inneat patch cable management.Also easier for IT workers to identifycables.
-
19
GIGARACK 19” 250 SERIESCABLING & SERVER ACCESSORIES
RÉFÉRENCE DESCRIPTION
GGM ARPTRAV 19’’ work surface support
SPECIFICATIONS
• Color : RAL 7035 / Black• Width : 19’’• Useful width : 483 mm• Depth : 250 mm
• Fixing position : On the front 19’’mounting profiles
• foam covered• Fit on all 19’’ racks
19'' WORK SURFACE SUPPORT
To obtain work surface. Quickly and easily fixed on the 19'' mounting profiles inthe front.
19’’ DUAL SLIDE RAIL CONSOLE DRAWERS
Allow to control and manage servers. Save space in your 19’’ cabinets with screen, keyboard/mouse, touchpad andKVM in just 1U.
RÉFÉRENCE DESCRIPTION
GGM ECS1501 19’’ console with 15’’ screenGGM ECS1508 19’’ console with 15’’ screen and 8 ports KVMGGM ECS1516 19’’ console with 15’’ screen and 16 ports KVM
GGM ECS1701 19’’ console with 17’’ screenGGM ECS1708 19’’ console with 17’’ screen and 8 ports KVMGGM ECS1716 19’’ console with 17’’ screen and 16 ports KVM
SPECIFICATIONS• Power source : 100 to 240 VAC• 2 x independent slide rails for LCD display
and keyboard • Screen : 15 or 17’’, active Matrix TFT LCD.• Resolution Capabilities : Max. up to
1024 x 768 (XGA) for 15” type and Max.up to 1280 x 1024 (SXGA) for 17’’ type
• Pixel pitch : Supports 0.297 mm x0.297 mm for15” type and supports0.264 mm x 0.264 mm for 17’’ type
• Viewing Angle (CR>10) : Right - Leftview 130° (Typ) Up - Down View 100°(Typ) for 15’’ type and Right - Left view60° ~ 70° (Typ) Up - Down View 45° ~60° (Typ) for 17’’ type
• Brightness : White 250 cd/m² for 15’’type and White 300 cd/m² for 17’’ type
• Supported colors : 16M Colors (6-bitwith FRC) for 15’’ type and 16.7M Co-lors (8•bit with FRC) for 17” type
• Operating system : Dos, Windows (3.1,9x, 2000, NT4, ME, XP, 2003 Server)Linux, Novell 3.12)-6,HP UX, SUN
• Keyboard : AZERTY, 106 key PS/2 key-board with touch pad
• KVM : without, 8 or 16 ports (according type)• Product color : Black• Height : 1 U• Width : 19’’• Fixing position : On the front and rear
19’’ mounting profiles• Cabinets with a minimum depth of
800 mm requested • Option : KVM cords 1,8 meters (GGM
ECSC180) or 3 meters (GGM ECSC300)
RÉFÉRENCE DESCRIPTION
GGM TC100 19'' Keyboard
SPECIFICATIONS
• Color : Black• Height in U : 1 U• Width : 19’’• Depth : 330 mm• Fixing position : On the front 19’’
mounting profiles
• sliding AZERTY keyboard • Touchpad• Metal frame• Fit on all 19’’ floor standing cabinets
19'' KEYBOARD
FOR OTHERS KEYBOARDS TYPES, PLEASE CONTACT US
-
20
GIGARACK 19” 250 SERIESCABLING & SERVER ACCESSORIES
RÉFÉRENCE DESCRIPTION
GGM B9P 19’’ power distribution unit 9 UTE socketsGGM B8PI 19’’ power distribution unit 8 UTE sockets with luminous switchGGM B6PDMT 19’’ power distribution units 6 UTE sockets with bipolar circuit breakerGGM B6PDD 19’’ power distribution unit 6 UTE sockets with circuit breakerGGM B8PPS 19’’ power distribution unit 8 UTE sockets with surge protectionGGM B9PIEC 19’’ power distribution unit 9 IEC C13 socketsGGM B8PCH 19’’ power distribution unit 8 SWITZERLAND socketsGGM B9PNL 19’’ power distribution unit 9 SCHUKO socketsGGM B8PINL 19’’ power distribution unit 8 SCHUKO sockets with luminous switchGGM B7PAMP 19’’ power distribution unit 7 UTE sockets with amperemeter
SPECIFICATIONS
• Profil features : Aluminium• Cord connection : HO5VVF 2 meters -
3 x 1,5 mm2 width moulded Schuko socket16 A - 250 V
• Height : 44,45 mm• Width : 19”• Depth : 44 mm
• Height in U : 1 U• Color : Black• Included accessories : Set of 2 supports
for 19’’ format• Fixing position : On the 19’’ mounting
profiles• Fit on all 19’’ racks
19'' POWER DISTRIBUTION UNITS WITH POWERCORD
Allow integration of pre-wired power supply in the 19’’ rack.
19'' POWER DISTRIBUTION UNITS WITH POWER TERMINAL
RÉFÉRENCE DESCRIPTION
GGM B8PAB 19'' power distribution unit 8 UTE socketsGGM B7PIAB 19'' power distribution unit 7 UTE sockets with luminous switch
SPECIFICATIONS
• Profil features : Aluminium• Terminal connection• Sockets type : UTE 16 A - 250 V• Height : 44,45 mm• Width : 19’’• Depth : 44 mm• Height in U : 1 U
• Color : Black• Included accessories : Set of 2 supports
for 19’’ format• Fixing position : On the 19’’ mounting
profiles• Fit on all 19’’ racks
Allow integration of pre-wired power supply in the 19’’ rack.
GGM B8PI
GGM B9P
GGM B8PAB
GGM B7PIAB
FOR OTHERS SOCKETS T YPE, PLEASE CONTACT US
GGM B7PAMP
-
21
GIGARACK 19” 250 SERIESCABLING & SERVER ACCESSORIES
RÉFÉRENCE DESCRIPTION
GGM VER10095 Set of 100 screws, washers and nuts
SPECIFICATIONS
• zinc coated panhead screw M6 x 16 • Plastic washer, black
• zinc coated cage nut M6 (9,5 x 9,5 mm)
To fix the equipments on the 19'' mounting profiles
RÉFÉRENCE DESCRIPTION
GGM BE 19” lightning unit 1U GGM CP Door switch
SPECIFICATIONS
• Profil features : Aluminium• Cord connection : HO5VVF 2 meters -
3 x 1,5 mm2 width moulded Schuko socket16 A - 250 V
• Height : 44,45 mm• Width : 19”• Depth : 44 mm
• Height in U : 1 U• Color : Grey• Included accessories : Set of 2 supports
for 19’’ format
• Fixing position : On the 19’’ mountingprofiles
• Fit on all 19’’ racks
19” LIGHTNING UNIT
GGM CP
GGM BE
FIXING KIT (SCREW, WASHER, NUT)
-
R E C O M M E N D B Y
THROUGHOUT THE NETWORK OF BRANCHES
www.GIGAMEDIA.net