golden plus diamante 18 diamante plus - mecapierre · golden plus diamante 18 diamante plus...
TRANSCRIPT
10/2008
GOLDEN PLUSDIAMANTE 18DIAMANTE PLUSNUMERICAL CONTROL WORKING CENTRES3 AND 4 INTERPOLATED AXIS+ TILTING HEAD
For the usage of its Numerical Control Working Centres Prussiani Engineering offers to its Customers a specifi c program for the drawingand working of any piece of marble, granite and stone. The program is named “STONECAM 3D” and is really complete and easy to use.In fact only three minutes are necessary to program a new bath top, complete of the layout of the suction cups and of the working sequences. With “STONECAM 3D” it is possible to program and produce all sorts of pieces, such as: bath tops, kitchen tops with or without draining board, tables, carvings and intarsia, engraved letters and in relief, wash basins hollowed out of blocks with any shape and section, cornices both linear and curved, bas-relieves, carved capitals, sculptures, special pieces.With “STONECAM 3D” it is possible to calculate the machining time and the cost of machining a piece.
02
STONECAM 3D, the cad-cam program easy and intuitive
070503
A B C D E F H I
L M N O P Q R S T
U V Z 1 2 3 4 5 6
G
MODEL A mm/inches B mm/inches C mm/inches Ø mm/inches L mm/inches
Golden Plus axis stroke Z 250 mm / 10 inches 500/20 220/9 180/7 -/- -/-
Diamante 18 and Diamante Plus axis stroke Z 350 mm / 14 inches 630/25 270/11 250/10 -/- -/-
Diamante 18 and Diamante Plus axis stroke Z 650 mm / 26 inches 930/37 500/20 430/17 550/22 3.300/130
EN ISO 9001:2000 Certifi cationPrussiani Engineering, in 2001, was awarded by the German certifying board DEKRA Intertek Certifi cation the certifi cation for quality system EN ISO 9001:2000.
04
- The tool-holder spindles are projected and built directly from Prussiani Engineering.
- They work on average six-seven years (considering a work shift) without problems and are easy to repair or replace.
- With no maintenance costs and machine stand still at all.
- The tool-holder tangs are made of special stainless steel.
THE SPINDLE, the heart of the machine
HARD-WORKING HEART
070507
GOLD
EN P
LUS
()
TECHNICAL DATAX axis stroke mm / inches 3.300 / 130
Y axis stroke mm / inches 1.600 / 63
Z axis stroke mm / inches 250 / 10
X axis top speed mt / feet per minute 40 / 131
Y axis top speed mt / feet per minute 40 / 131
Z axis top speed mt / feet per minute 10 / 33
Tool-holder spindle motor power HP/Kw 13,5/10
Rotation speed of the tool-holder spindle r.p.m 0:10.000
Automatic tool-change ISO 40
Tool-store stations 34
Tilting head for recess draining board 1.5°
Vacuum pump m /h 80
Normalized equivalent sound power without material dB (A) 71
Normalized equivalent sound power in operation dB (A) 78
Automatic centralized lubrication grease
Electronic handwheel Yes
Water requirement Litres per minute 40
Compressed air pressure Atm / Bar 6
Max. total absorbed power Kw 17
Overall dimensions: - length - width - height mm 5.630 x 2.980 x 2.250
inches 222 x 117 x 89
Approximate total machine weight Kg / pounds 5.200 / 11.440
Certifi cation according to EC standards
3
+-
070509
DIAM
ANTE
18
()
The forefront working centre
TECHNICAL DATAX axis stroke mm / inches 3.500 / 138
Y axis stroke mm / inches 1.800 / 71
Z axis stroke mm / inches 350-650 / 14-26
X axis top speed mt / feet per minute 40 / 131
Y axis top speed mt / feet per minute 40 / 131
Z axis top speed mt / feet per minute 10 / 33
Tool-holder spindle motor power HP/Kw 15/11
Rotation speed of the tool-holder spindle r.p.m. 0:10.000
Automatic tool-change ISO 40
Tool-store stations 36
Tilting head for recess draining board 1.5°
Vacuum pump m /h 80
Normalized equivalent sound power without material dB (A) 71
Normalized equivalent sound power in operation dB (A) 78
Automatic centralized lubrication grease
Electronic handwheel Yes
Water requirement litres per minute 40
Compressed air pressure Atm / Bar 6
Max. total absorbed power Kw 18
Overall dimensions: - lenght - width - height mm 6.580 x 3.400 x 2.850/3.500
inches 259 x 134 x 112/138
Aproximate total machine weight Kg / pounds 7.500 / 16.500
Certifi cation according to EC standards
3
Automatic electronic feeler for measuring
the work-piece thickness
+-
070511
DIAM
ANTE
PLU
S(
)
Forefront and maximum versatilityTECHNICAL DATA
X axis stroke mm / inches 3.500 / 138
Y axis stroke mm / inches 2.700 / 106
Z axis stroke mm / inches 350-650 / 14-26
X axis top speed mt / feet per minute 40 / 131
Y axis top speed mt / feet per minute 40 / 131
Z axis top speed mt / feet per minute 10 / 33
Tool-holder spindle motor power HP/Kw 15/11
Rotation speed of the tool-holder spindle r.p.m. 0:10.000
Automatic tool-change ISO 40
Tool-store stations 25+25
Tilting head for recess draining board 1.5°
Vacuum pump m /h 80
Normalized equivalent sound power without material dB (A) 71
Normalized equivalent sound power in operation dB (A) 78
Automatic centralized lubrication grease
Electronic handwheel Yes
Water requirement litres per minute 40
Compressed air pressure Atm / Bar 6
Max. total absorbed power Kw 19
Overall dimensions: - lenght - width - height mm 6.580 x 4.600 x 2.850/3.500
inches 259 x 181 x 112/138
Aproximate total machine weight Kg / pounds 9.000 / 19.800
Certifi cation according to EC standards
3
+-
080612
TOOL
-HOL
DER
TANG
S(
)
A
D
B
C
E
TOOL-HOLDER TANGSMADE OF STAINLESS STEELFOR A LONG LIFE
1
2
3
4
5
6
7
8
18
TECH
NICA
L FE
ATUR
ES(
)The Working Centres are rich in numerous details that make them unique in their sector.Equipped with a wide range of automatically changeable tools, the machines allow to work with effi ciency and easiness, with exceptional performances.Technical features
Axis movementBall recirculation screws and recirculation roller guides. This solution guaran-tees: high precision, great rigidity, long lasting.
Secure fi xingMechanical or pneu-matic pliers and different shape and size suction cups for a secure fi xing of the pieces to be worked.
PrecisionElectronic presetting for an accurate measurement of the diameter and length of the tools,to obtain always perfect profi les on any kind of material.
ToolsTool holder tangs can support two grinding wheels at once and so optimising the use of the tool change and theproduction time.
19
TECH
NICA
L FE
ATUR
ES(
)
BushhammerSlab thicknessAn electronic feeler is capable of sensing and compensating the differences of the thickness of the material. The tool fl oats following the material thickness difference on all theworking path, assuring an excellentprofi les quality. On the GOLDEN PLUS machine the electronic feeler has to be inserted by hand , while on the DIAMANTE machines the electronic feeler works automatically.
GroovesAngular driving gear for a quick execution and polishing of the grooves on the kitchen tops.
www.prussiani.com
ww
w.g
-sp
ot.i
t
Prussiani Engineeringvia Galvani, 16 - 24061 Albano Sant’Alessandro (Bergamo) Italytel. +39 035 581444 - fax +39 035 4528235e-mail: [email protected]
I CHOOSE PRUSSIANI WORKING CENTRES BECAUSE...- Mechanical toolholder spindle, entirely designed and built by PRUSSIANI ENGINEERING. It works on an average six/seven years (considering one turn a day) without problems. Easy and cheap complete replacement of worn parts.
- Electronic feeler for measuring the work-piece thickness. The tool fl oats following the material thickness difference on all the working path, assuring an excellent profi les quality.
- Double gasket rubber coating suction cups. The central sphere with pneumatic control makes the positioning on the table easier. For the clamping of the pieces the customer can choose between a mechanical or vacuum packed clamping system. The fi rst one, safer, is recommended for the workings of granites and hard stones in general. The second one, more functional, is recommended for the workings of marble and tender stones in general.
- Ball recirculating screws and precision recirculation roller guideways axes movement: this means long lasting movement precision.
- Highly qualifi ed and fast after sales service assistance.
- Three-year total guarantee.
...THE CUSTOMERS SAY THAT “THE PRUSSIANI” ARE MACHINES THAT NEVER STOP RUNNING.