globally published magazines for the coating and ... · 11.-13. oktober lucca, italien edipap srl...

20
globally published magazines for the coating and converting industry C2 Europe C2 Deutschland C2 International C2 Asia MEDIA DATA 2018

Upload: others

Post on 10-Jul-2020

0 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: globally published magazines for the coating and ... · 11.-13. Oktober Lucca, Italien Edipap Srl Paper Middle East 24.-26. Oktober Cairo International Convention Centre (CICC) Nile

globally published magazines

for the coating and converting industry

C2 Europe • C2 Deutschland • C2 International • C2 Asia

MEDIA DATA 2018

Page 2: globally published magazines for the coating and ... · 11.-13. Oktober Lucca, Italien Edipap Srl Paper Middle East 24.-26. Oktober Cairo International Convention Centre (CICC) Nile

2018 | C2 Coating & Converting www.c2-europe.eu

PUBLISHING HOUSE AND CONTACTS

Nina Pirchmoser Nora Heise Martin HirschmannRainer Miserre Franz Hermann Heidrun Dangl

2

Deutscher Fachverlag GmbH

Mainzer Landstr. 25160326 Frankfurt, GermanyTel.: +49 69 7595-01Fax: + 49 69 7595-2999Internet: www.dfv.de

Publishing Director

Rainer Miserre

Tel.: +49 69 7595-1291Fax: +49 69 [email protected]

Publisher

Franz Hermann

Tel.: + 49 40 30712170Fax: +49 40 38017 826 [email protected]

General Fax: +49 69 7595-1820

Advertising Department

Heidrun Dangl

Advertising DirectorTechnical Publications Tel.: +49 69 [email protected]

Nina Pirchmoser

Advertising Sales ManagerTel.: +49 69 [email protected]

Central Advertising Service

Tel.: + 49 69 7595-2963Fax: +49 69 [email protected]

Editorial Department

Nora Heise

Editor-in-ChiefTel.: +49 151 [email protected]

Martin Hirschmann

Editorial ManagementTel.: +49 69 [email protected]

Terms and

agreements can

be found under:

www.dfv.de/

service/agb

Page 3: globally published magazines for the coating and ... · 11.-13. Oktober Lucca, Italien Edipap Srl Paper Middle East 24.-26. Oktober Cairo International Convention Centre (CICC) Nile

2018 | C2 Coating & Converting www.c2-europe.eu

Inhalt

3 Portrait

4 C2 Deutschland

5 C2 Europe

6 C2 International

7 C2 Asia

9 Advertising formats and prices

10 C2 Deutschland editorial program

11 C2 Europe editorial program

12 C2 International editorial program

13 C2 Asia editorial program / formats

14 Formats and technical data

15 C2 Converting Summit

16 Online advertising

17 Online suppliers directory

18 OPE journal portrait

19 OPE journal editorial program

C2 – the medium of choice for the converting industry!

C2 is the only globally distributed specialized magazine for the coating and

C2 Europe, C2 Asia and C2 International we address experts and decision makers of the processing and converting industries for film, nonwovens and paper in more than 70 countries. In 2018 we will distribute more than

In C2 we present to our readers:• analyses of the latest market trends • independently researched economy and business reports• newest technological developments and processes from the fields of coating

and laminating, pre- and surface treatment, drying and curing, metallization, slitting/rewinding, measurement and testing processes and much more.

Furthermore, in every issue readers will find detailed information on selected key technological topics. Additionally, we keep the industry up-to-date on our websites www.c2-deutschland.de, www.c2-europe.eu and www.c2-int.com with daily news about current developments in the converting business. Additionally, the online news in English language are distributed through our daily Twitter channel @c2magazines.

The C2 portfolio is completed by OPE journal – the specialist magazine for the organic and printed electronics industry (see page 18).

3

PORTRAIT

Page 4: globally published magazines for the coating and ... · 11.-13. Oktober Lucca, Italien Edipap Srl Paper Middle East 24.-26. Oktober Cairo International Convention Centre (CICC) Nile

2018 | C2 Coating & Converting www.c2-europe.eu

C2 DEUTSCHLAND

C2 Deutschland - the window on the German-speaking converting industry

C2 Deutschland caters to CEOs, technical directors, factory managers, engineers and sales representatives of manufacturers, service providers and suppliers active in the film, nonwovens and paper converting industry.

C2 Deutschland has a circulation of 9500 copies in print or e-magazine format, and is sent personally to decision makers and experts in Germany, Austria and Switzerland. C2 Deutschland is published six times a year in bi-monthly alternation with C2 Europe. The editorial core focus lies on independently researched economic and business news. Our database of more than 15 000 converters and decision makers allows a target-specific, personalised distribution to 9500 recipients respectively.

Frequency 6 issues per yearJournal format A 4Volume 12th Edition (2018)Subscription rates Annual subscription D (incl. VAT) €98.60 Annual subscription EU (with valid VAT-ID number) €100.00 RoW €103.00 Individual sale price €16.43Prices include postage and packing. All prices include VAT. Airmail on request.

C2 Deutschland country breakdown

Germany 8107Switzerland 674Austria 636International 83

Circulation: 9500 copies

0 10 20 30 40 50

Others

Agriculture

Furniture

Security/Specialty

Electronics

Construction

Textiles/Nonwovens

Pharmaceutical/Medical

Industrial films

Automotive

Food

8

4

5

8

9

11

17

26

26

30

44

The most important market segments (percentage)

Sour

ce: C

2 Co

nver

ting-

Surv

ey 2

014

0 1000 2000 3000 4000 5000 6000

Other

R & D

Purchasing/Finance

Sales

Marketing

Engineering/Technician

Management

200

362

525

763

833

1380

5437

Job function

www.c2-deutschland.de

Circ

ulat

ion:

950

0 co

pies

4

Page 5: globally published magazines for the coating and ... · 11.-13. Oktober Lucca, Italien Edipap Srl Paper Middle East 24.-26. Oktober Cairo International Convention Centre (CICC) Nile

2018 | C2 Coating & Converting www.c2-europe.eu

C2 EUROPE

C2 Europe – the magazine for the European converting industry

C2 Europe is our English language magazine for the European converting

or e-magazine format, and is sent personally to decision makers and experts (executives and management) throughout Europe. As with C2 Deutschland,

along with trade fairs and recent events, ensuring that our readers are kept informed on all the developments in the industry.

Frequency 6 issues per yearJournal format A 4Volume 12th Edition (2018)Subscription rates Annual subscription D (incl. VAT) €98.60 Annual subscription EU (with valid VAT-ID number) €100.00 RoW €103.00 Individual sale price €16.43Prices include postage and packing. All prices include VAT. Airmail on request.

C2 Europe country breakdownCi

rcul

atio

n: 9

500

copi

es

United Kingdom 2627Italy 1436The Netherlands 1075France 877Belgium 616Poland 349Spain 339Sweden 256

Finland 250Denmark 172Czech Republic 167Russia 146Slovakia 122Ireland 113Turkey 109International 846

0 10 20 30 40 50 60

others

Agriculture

Furniture

Construction

Electronics

Automotive

Textiles/Nonwovens

Security/Specialty

Pharmaceutical/Medical

Industrial films

Food

11

3

4

8

8

10

12

14

23

26

58

The most important market segments (percentage)

0 1000 2000 3000 4000 5000

Other

R & D

Purchasing/Finance

Sales

Marketing

Engineering/Technician

Management

378

355

466

846

1053

1983

4419

Job function

www.c2-europe.eu

Circ

ulat

ion:

950

0 co

pies

Sour

ce: C

2 Co

nver

ting-

Surv

ey 2

014

5

Page 6: globally published magazines for the coating and ... · 11.-13. Oktober Lucca, Italien Edipap Srl Paper Middle East 24.-26. Oktober Cairo International Convention Centre (CICC) Nile

2018 | C2 Coating & Converting www.c2-europe.eu

C2 INTERNATIONAL

C2 International – digitally distributed worldwide

C2 International is our digital English language issue for readers outside Europe and Asia. We present technological developments in the fields of products,

we report on all topics of interest for the sector, in the proven mix of technical texts, interviews, features and discussions.

Frequency 6 issues per yearJournal format digitalSubscription rates Annual subscription digital: €70.00 All prices include VAT.

C2 International country breakdown

Circulation: 25 000 copies

USA 21 751Brazil 910Canada 630Japan 134Mexico 129India 94Chile 83Argentina 78

Russia 76United Arab Emirates 66Colombia 53Pakistan 44Australia 40Saudi Arabia 35Egypt 31Others 846

0 10 20 30 40 50 60

Others

Agriculture

Furniture

Textiles/Nonwovens

Electronics

Construction

Security/Specialty

Automotive

Pharmaceutical/Medical

Industrial films

Food

10

3

5

6

7

10

11

20

25

26

51

The most important market segments (percentage)

Job function

Purchasing 725Management11 875

Marketing & Sales Department

10 775

Engineering/Technican 1625

www.c2-int.com

Sour

ce: C

2 Co

nver

ting-

Surv

ey 2

014

Circ

ulat

ion:

25

000

copi

es

6

Page 7: globally published magazines for the coating and ... · 11.-13. Oktober Lucca, Italien Edipap Srl Paper Middle East 24.-26. Oktober Cairo International Convention Centre (CICC) Nile

2018 | C2 Coating & Converting www.c2-europe.eu

C2 Asia

Show your true colours with C2 Asia

on the strong Chinese converting market!

For 2018, the International Monetary Fund predicts a staggering economical growth of 6.5% for China. Therefore, the country belongs to the most dynamic economies in the world. Even for German and European converting companies, China is one of the most important and attractive markets.

Thus, C2 Asia presents its readers in China and the entire Asian region the latest innovations and trends from the European converting sector and portraits the most important companies in extensive reports and best practice articles.

With a circulation of 9000 copies (bilingual English/Mandarin), the magazine is sent to individual converter on the Asian markets (alternating between print and digital), and is also distributed freely at all relevant coating and converting fairs in Asia.

Frequency 4 issues per yearJournal format 210mm x 285mmVolume 10th Edition (2018)Subscription rates Annual subscription D (incl. VAT) €70.00 Annual subscription EU (with valid VAT-ID number) €67.00 RoW €75.00 Individual sale price €17.50Prices include postage and packing. All prices include VAT. Airmail on request.

Distribution outside China

Circulation: 2800 copies

Hong Kong 1148Korea 374Malaysia 342Indonesia 315

Taiwan 280Singapore 144Vietnam 113Others 84

Distribution in the 15 most

important economic regions of China

Circulation: 6200 copies

Zhejiang 1228Shanghai 923Jiangsu 623Shandong 576Guangdong 421Bejing 381Liaoning 295Hebei 254

Tianjin 221Fujian 188Heilongjian 148Anhui 140Sichuan 131Hubei 128Hunan 115Other Provinces 428

www.c2-asia.com

7

Page 8: globally published magazines for the coating and ... · 11.-13. Oktober Lucca, Italien Edipap Srl Paper Middle East 24.-26. Oktober Cairo International Convention Centre (CICC) Nile

2018 | C2 Coating & Converting www.c2-europe.eu

ADVERTISING FORMATS AND PRICES

Formats width x height in mm Advertising price in EUROS

C2 Deutschland / C2 Europe

C2 International

OPE journal

Advertising in the type area Advertising with bleed*plus 4 mm bleed margin

C2 Deutschland /

C2 Europe

C2 Asia / OPE journal

C2 International

2/1 pages 392 x 255 420 x 297* 6920 3460

1/1 page 185 x 255 210 x 297* 3850 1925

1/2 junior page 122 x 182 - 2540 1270

1/2 page horiz / vert 185 x 125 / 90 x 255 210 x 140 / 104 x 297* 2240 1120

1/3 page horiz / vert 185 x 82 / 58 x 255 210 x 102 / 72 x 297* 1580 790

1/4 page horiz / vert / 2 column 185 x 60 / 42 x 255 / 90 x 125 210 x 75 / 56 x 297 / 104 x 148* 1260 630

COATING &CONVERTING

F A C H M A G A Z I N F Ü R D I E C O A T I N G - U N D C O N V E R T I N G - B R A N C H E

Ausgabe 65

Marktbericht: Klebstoffe & Auftragssysteme (ab S.15)

Converter des Monats:Nova Films & Foils/USA (ab S.39)

Marktbericht: Etikettenverarbei-tung & -veredelung (ab S.25)

September 2017

LABELEXPO EUROPE

VORSCHAU

EXTRUSION & EXTRUSIONSBESCHICHTUNG

De

uts

che

r Fa

chve

rla

g G

mb

H •

Ma

inze

r La

nd

str.

25

1 •

60

32

6 F

ran

kfu

rt a

m M

ain

/ G

erm

an

y •

ww

w.c

2-d

eu

tsch

lan

d.d

e

Alles rund um die Veredelung und Verarbeitung von Fol ie , Vl iesstoff und Papier

COATING & CONVERTING | C2 DEUTSCHLAND 65 | SEPTEMBER 2017

VERANSTALTUNGSKALENDER Veranstaltung Datum Ort Veranstalter

2017

Touch Taiwanwww.touchtaiwan.com

20.-22. SeptemberTaipei Nangang Exhibition Hall 4F,

Taipeh

Taiwan Display Union Association (TDUA), Taiwan TFT LCD Association (TTLA) u.A.

Pack Print Internationalwww.pack-print.de

20.-23. SeptemberBangkok International Trade &

Exhibition Centre (BITEC)Messe Düsseldorf Asia

Labelexpo Europewww.labelexpo-europe.com

25.-28. September Brussels Expo, Brüssel Tarsus Group

MIAC 2017www.miac.info

11.-13. Oktober Lucca, Italien Edipap Srl

Paper Middle Eastwww.papermideast.com

24.-26. OktoberCairo International Convention

Centre (CICC)Nile Trade Fairs

InPrint www.inprintshow.com

14.-16. November Messe München Mack Brooks Exhibitions

SPS/IPC/Drives www.mesago.de

28.-30. November Messe Nürnberg mesago Messe Frankfurt

www.polytype-converting.com

Wir bei Polytype Converting verstehen unsere Mission darin, Tag für Tag immer

bessere Lösungen für ständig wachsende Herausforderungen zu entwickeln.

Das ist Beschichtungstechnologie für inspirierende Leistung. Unsere Aktivi-

täten konzentrieren sich in erster Linie auf unsere Kunden und ihre Produkte.

Polytype Converting ist ein globaler Lieferant von Beschichtungstechnik und

RZ4_c2_Image_07201713.indd 2 14.07.17 09:32

9

EX

TR

USIO

N &

EX

TR

USIO

NSB

ESC

HIC

HT

UN

G

eignen sich hervorragend für die Technologien Ultra Flat Plus und

Ultra Stretch, wobei die Folie verstreckt und dadurch extrem dünn

wird. Das Ergebnis kann sich sehen lassen: Die Folie ist sehr dünn - bei

verbesserter Festigkeit und damit höherer Belastbarkeit. Und es

gibt einen zusätzlichen Pluspunkt: Da weniger Material verbraucht

wird, sinken die Rohstoffkosten für den Folienproduzenten.

Ralf Pampus, Vertriebsleiter Reifenhäuser Blown Film, resümiert:

„Wir konnten den Kunden erneut deutlich machen, dass unsere

Anlagen alle Anforderungen erfüllen, um optimale Blasfolienqua-

lität zu produzieren. Wir hatten wichtige, qualitativ hochwertige

Gespräche. Mit dem Feedback gehen wir in die nächste Runde der

Entwicklung, um die Anforderungen unserer Kunden zu erfüllen.“

PSA Technology GmbH

Am Tower 6 · D-54634 Bitburg

Tel: +49 (0) 6561 94500

[email protected]

www.psa-technology.com

Speziell zum Inspizieren und Konfektionieren von Etiketten und Flaschenbanderolen

LabelSlit mit

PSA Technology

Ein Blick in das Technikum von Reifenhäuser

PERFEKTE BLASFOLIEN

FÜR DEN LAMINIERPROZESS

Jahrelang mussten Produzenten von Blasfolien mit

leicht welligen und nicht komplett planen Folien kämpfen.

Probleme bereiten insbesondere Folien, die etwas steifer

sind, HDPE oder PP enthalten. Auch in der Produktion von

Blown Film löst das Problem mit dem EVO Ultra Flat Abzug.

Mit Hilfe dieses neuartigen Abzugsystems können Folien

nun wesentlich planer hergestellt werden – ihre Eignung für

das Bedrucken und Laminieren wird erheblich verbessert.

Folienabzug günstiger positioniert

Das Geheimnis der neuen Planlageoptimierung liegt vor allem

in der Positionierung innerhalb des Prozesses. Während bisherige

Systeme kurz vor dem Wickler angebracht waren, setzt EVO Ultra

Flat dort an, wo die Bedingungen zum Glätten prozesstechnisch

am besten sind: viel weiter vorne, nämlich zwischen Abzug

und Wendelstangensystem. Die Folie hat in dieser Phase des

Prozesses noch eine Temperatur von über 50 °C und ist damit

noch nicht vollständig auskristallisiert. Daher funktioniert das

Markt erhältlichen Systemen, die später im Prozess ansetzen.

Dabei sind die Investitionskosten gering und die

Funktionalität und Flexibilität groß. Produzenten können den

gewünschten Effekt auf die Planlage mit vier Temperierwalzen

und zwei Andruckwalzen einstellen, deren Geschwindigkeit

So lässt sich das Glätten je nach Rohstoffen und Foliendicke

optimieren. Eine gezielte Steuerung der Walzen wirkt

außerdem einem zu großen Bogenlauf der Folie entgegen.

Das Ergebnis: Die Planlage von Laminier- und Barrierefolien

lässt sich um bis zu 40 % verbessern und der Bogenlauf

teilweise um bis zu 90 % reduzieren. Außerdem fällt weniger

Ausschuss an. Im Anschluss können Folien problemloser

weiterverarbeitet werden, zum Beispiel durch Laminieren,

Bedrucken und Konfektionieren zu Folienverpackungen.

Mittlerweile hat sich die Reifenhäuser-Technologie am Markt

soweit etabliert, dass ca. 70 % aller relevanten Neuanlagen von

Reifenhäuser mit der EVO Ultra Flat Technik ausgerüstet sind.

Reifenhäusers EVO Ultra Flat

8

EX

TR

USIO

N &

EX

TR

USIO

NSB

ESC

HIC

HT

UN

G

Alternative Kunststoffe für die

Kunststoffproduktion sind ein großes

Thema in der Verpackungsbranche. AA„Biomaterialien sind in der Verpackungsindus-

trie längst kein Trend mehr, sondern etab-

lieren sich für viele Anwendungsbereiche “,

erläutert Eugen Friedel, Senior Sales Manager

Reifenhäuser Blown Film. Der Rohstoff HDPE

wird dabei inzwischen sehr erfolgreich durch

Biomaterialien ersetzt. Mittlerweile werden

nicht mehr nur Hemdchenbeutel ökologisch

produziert, sondern zunehmend auch Obst-

und Gemüsebeutel, Müllbeutel für Bioabfälle

und Mulchfolie für die Agrarindustrie.

„Das A und O für die Folienqualität ist

die Verarbeitbarkeit der Materialien auf

dem Extruder“, so Friedel. „Aufgrund der

wesentlich niedrigeren Schmelzetemperatur

bei Biomaterialien sind kaltlaufende Extruder

erforderlich. Der Reifenhäuser Extruder

hat eine solche Bandbreite und erzeugt

selbst bei niedrigen Temperaturen eine

homogene Schmelze für eine einwandfreie

Verarbeitung der Biomaterialien.“

Vorteile von Biofolien

Folgerichtig stellte Reifenhäuser bei einem

Open House, das vor wenigen Wochen

am Firmensitz in Troisdorf stattfand, die

Anlagengeneration 5-Schicht-Anlage EVO,

auf der unterschiedliche Biofolien produziert

wurden, ins Zentrum des Interesses. Bei

den Live-Vorführungen, die unter den

wachsamen Augen der mehr als 100 Gäste

die Extrusionsexperten auf die Rohmaterialien

verschiedener Hersteller zurück.

So kam für die Präsentation der EVO

Ultra Stretch Anlage mit GuiltFreePlastics ein

Biokunststoff des Kooperationspartners United

Biopolymers zum Einsatz. Dabei handelt es

sich um einen stärkebasierten Biokunststoff

der nächsten Generation, der bis zu 90 % aus

nachwachsenden Rohstoffen bestehen kann

und dabei sowohl 100 % recycelbar als auch

100 % biologisch abbaubar ist. Mit EVO Ultra

Stretch lässt sich dieses Material inline bis zu

einem Verhältnis von 6:1 verstrecken. Die so

produzierten Biofolien überzeugen durch bes-

sere mechanische Eigenschaften und höchste

Transparenz und empfehlen sich für komplett

neuer Anwendungen im Verpackungsbereich.

Hierbei punktet die Reifenhäuser EVO Tech-

nologie für modulare Blasfolienanlagen für

deutlich reduzierte Komplexität und höchste

Folienqualitäten. Glaubt man den Troisdorfer

Experten, so setzt das Unternehmen damit

neue Standards in der Blasfolienproduktion.

Reifenhäuser zeigte im Technikum

neben den Folien von United Biopolymers

auch Produkte des italienischen Herstellers

Novamont. Die Biomaterialien beider Firmen

Bio auf dem VormarschReifenhäuser präsentiert EVO Blasfolienanlage zur Produktion von Biofolien

www.bobst.com

ROTOEXTRUDER 700F

MASTERING THE WORLD OF EXTRUSION COATING

Labelexpo Europe | 25 - 28 September 2017 | Brussels, Belgium | Hall 3 Stand 3A58

13

EX

TR

USIO

N &

EX

TR

USIO

NSB

ESC

HIC

HT

UN

G

INFORMATION

Bandera meldet Großauftrag aus Frankreich

Ein großes französisches Converting-

Unternehmen hat jetzt mehrere

Extrusionsanlagen für PET-Hartfolien von

den italienischen Maschinenbauexperten

von Bandera erworben. Zwei der

drei Anlagen sind an Standorten in

Frankreich installiert worden. Bandera

betont gegenüber C2, dass die Anlagen

alle europäischen und französischen

Standards und Normen entsprechen.

Bemerkenswert ist nach Ansicht der

Maschinenbauer die große Flexibilität

der Extrusionsanlagen, die ohne weitere

auch Rohmaterialien wie PP, PS und PLA

verarbeiten können. Da die Produktion

können die französischen Converter

lebensmittelverträgliche Platten für das

Thermoformen herstellen, die zudem

auch noch einen hohen Anteil recycelter

Materialien enthalten. Der vollständige

Verzicht auf eine Entfeuchtungs- und

Kristallisierungeinheit, gepaart mit einem

drastisch gesenkten Energieverbrauch,

macht eine deutliche Reduzierung der

allgemeinen Produktionskosten im

Vergleich zu traditionellen Technologien

möglich, ohne dass dies zu Lasten

der Qualität des Endprodukts geht.

Modernste technische Features

Die Extrusionsanlagen sind für

Folienbreiten von bis zu 1.450 mm

ausgelegt, die Foliendicke liegt bei PET

zwischen 150-1.500 µm. Der Anlagen-

Output wird mit 1.200 kg/h beziffert. Zwei

rotierende Doppelschneckenextruder (2C

85 mm 52 l/d), in Kombination mit einer

-

tionssystem mit automatischer Rückspül-

Reinigungseinheit runden die Ausstattung

ab. Ein Einschneckenextruder (TR 75 mm

35 l/d), versehen mit Modulen für das

Materialhandling und die Dosierung und

einem Doppel-Plattensiebwechsler für

Einschneckenextruder, gehört ebenfalls

zur Ausrüstung. Eine Breitschlitzdüse

mit integriertem Formatbegrenzer und

eine Schleifeinheit zur Sammlung der

Randstreifen sind ebenso erhältlich wie

ein Kontrollsystem zur Überwachung aller

Produktions- und Anlagenparameter.

Diese Extrusionsanlagen hat Bandera jetzt an

einen französischen Großkunden ausgeliefert

18

COATING & CONVERTING | C2 DEUTSCHLAND 65 | SEPTEMBER 2017

KLE

BST

OFFE

& A

UF

TR

AG

SS

YST

EM

E | M

AR

KT

BE

RIC

HT

oftmals eine „vergessene Schicht“, obwohl

er ein integraler Bestandteil des gesamten

Verpackungsdesigns ist. Tatsächlich spielen

Klebstoffe eine wichtige Rolle, wie zum

Beispiel beim Laminieren von Papier und

Karton oder beim Kleben von Beuteln

und Tüten. Flexible Verpackungen für

Chips, das Befestigen von Strohhalmen an

Getränkeverpackungen, die Endverklebung

von Kartons und das Etikettieren von

Bei diesen und vielen anderen

Anwendungen ist der Klebstoff

ein wesentlicher Bestandteil des

Verpackungsdesigns. Die Sicherheit der

Verbraucher ist dabei das wichtigste

Anliegen der Lebensmittelbranche.

Migration in der

Lebensmittelverpackung

ist ein zentrales Thema

Migration ist die Übertragung von

Stoffen aus der Verpackung in die Nahrung

und umgekehrt. Alle Verpackungsmate-

rialien, zum Beispiel Pappe, Druckfarbe

oder Klebstoff können zur Migration

beitragen. Diese Wechselwirkung kann

zu einer Verunreinigung führen, die zu

einem Qualitätsverlust der verpackten

Nahrungsmittel beitragen kann und diese

sogar ungenießbar machen. Um ein solches

Szenario zu vermeiden, sollte die Migration

auf ein Minimum reduziert werden.

Daher ist es wichtig, über die Gesetz-

gebung zur Lebensmittelsicherheit und

-verpackung Bescheid zu wissen. In der

(EG) Nr. 178/2002 die allgemeinen

Anforderungen an die Lebensmittelsicherheit

Danach ist jede Firma, die Lebensmittel auf

den Markt bringt, dafür verantwortlich,

dass sie für den Verzehr unbedenklich

sind. Darüber hinaus sind Lebensmittel-

Lebensmittel vom Markt zu nehmen.

In Europa gibt es derzeit jedoch keine

Regelungen gibt es allgemein für Lebens-

mittelkontaktmaterialien, zum Beispiel für

Verpackungsmaterialien oder Behältnisse

für den Transport von Lebensmitteln. Die

europäische Gesetzgebung fordert zum

Beispiel die Durchführung von so genannten

Risikobewertungen auf jeder Stufe der

Verpackungs-Lieferkette. Als Hersteller von

Verpackungsklebstoffen ist Henkel Teil der

Lieferkette für Lebensmittelkontaktmateria-

-

wertung für seine Produkte durchzuführen.

Dieser Prozess zielt darauf ab,

dem nächsten Stadium der Lieferkette

angemessene Informationen zur Verfügung

zu stellen, um eine ordnungsgemäße,

individuelle Risikobewertung und letztlich

eine maximale Lebensmittel- und

Verbrauchersicherheit zu gewährleisten.

Strategischer Partner für

Lebensmittelsicherheit

und Markenwert

Die Experten von Henkel verweisen

-

gen für lebensmittelsichere Verpackungen

verbessern. Mit dem Start des globalen

Packaging Portals und der europäischen

Food Safe Packaging Initiative setzt

Henkel auf dieses entscheidende Thema.

Henkel bietet nicht nur ein Portfolio von

sicheren Klebstoffen für Lebensmittelver-

packungen, die dazu beitragen, Marken

und Konsumenten zu schützen, sondern

gleichzeitig hochwirksame Lösungen für die

neuesten Anforderungen und Trends der

Verpackungsbranche – darunter „On-

The-Go“-Verpackungen wie Pappbecher

für Heißgetränke oder „Home-Delivery“-

Verpackungen, bei denen der Schwerpunkt

auf leichterem Gewicht und bequemen

Transport liegt. Weitere Trendthemen

sind personalisierte Verpackungen,

umweltschonende Verpackungen und

sogenannte intelligente Verpackungen,

die den Verbrauchern einen verbesserten

Zugang zu Produktinformationen

ermöglichen und gleichzeitig Produzenten

eine verbesserte Rückverfolgbarkeit

und Schutz vor Diebstahl bieten.

Henkel ist seit Jahrzehnten ein strategi-

scher Partner für die Verpackungsbranche

damit verbundene Dienstleistungen.

Darüber hinaus ist das Düsseldorfer

Unternehmen ein wichtiger Akteur für die

Ausbildung von Experten dieser Branche.

Dies zeigt sich auch im Food Safety Training

Center, in dem Henkel interaktive Webinare,

Experten-E-Learning-Sessions und ein

umfangreiches Verpackungs-Glossar mit

wertvollen Erläuterungen zu den wichtigsten

Begriffen in Bezug auf lebensmittelsi-

chere Verpackungen anbietet.

Klebstoffe spielen eine wichtige Rolle bei verschiedenen Verpackungsvorgängen wie dem

Papier- und Kartonlaminieren

15

KLE

BST

OFFE

& A

UF

TR

AG

SS

YST

EM

E | M

AR

KT

BE

RIC

HT

Auf der diesjährigen Labelexpo Euroe

zeigt die H.B. Fuller Europe GmbH

aus Zürich ihre volle Bandbreite

entfernbaren sowie repositionierbaren

wasserbasierten und Hotmelt-Klebstoffen.

Sie sollen zur Einhaltung der Markenin-

tegrität beitragen und darüber hinaus

Benutzerfreundlichkeit und die Erfüllung von

industriellen Qualitätsstandards sicherstel-

len. Mit seiner jüngsten Investition in die

europäischen Beschichtungskapazitäten will

H.B. Fuller die hohe Bedeutung der Differen-

zierung auf den Märkten unterstreichen und

Klebebändern mit hochwertigem Support

schon zu einem frühen Zeitpunkt in der

Wertschöpfungskette zur Seite stehen.

Da der weltweite Markt für druck-

jährlich um 6,3 % auf 8,6 Mrd. US-Dollar

steigen soll, antwortet H.B. Fuller aktiv auf

die globale Nachfrage für permanente und

entfernbare Lösungen. Zum umfangreichen

Portfolio im PSA-Bereich gehören wasser-

basierte, Hotmelts und lösemittelbasierte

acrylische und kautschukbasierte Compound-

Formulierungen, die für eine Reihe an

Etiketten- und Klebebandprodukten genutzt

werden können. Das Unternehmen kann

in-house einzigartige Compound-Klebstoffe

mittels Polymerisierung herstellen, die

verbesserte Leistung bieten sollen.

Verbesserte Leistung und

Funktionalität dank PSA

Obwohl sie nur einen kleinen Teil des

Endprodukts ausmachen, spielen Etiketten

eine wichtige Rolle darin, den Kunden die

gewünschte Funktionalität und Attraktivität

eines Produkts näherzubringen. Zusätzlich

müssen sie eine stetig steigende Zahl an

Compliance- und Sicherheitsrichtlinien

erfüllen – insbesondere in der Pharma- und

Lebensmittelindustrie. „Label-Converter

müssen sich der heutigen schnelllebigen

Situation anpassen und dabei auch

Lifestyle-Faktoren beachten. Zügig müssen

nachhaltigere Formate und Qualitätssi-

cherungs-Features bereitstehen – etwa

„Ready-to-Go“-Lebensmittelbeutel, wieder-

verschließbare Gewebe oder Trockennah-

erklärt Judith Liddle, Marketing Manager

Converting Solutions EIMEA bei H.B. Fuller.

So verbindet z.B. der wasserbasierte

Fulltak SE 8301 ideal Beschichtung,

Trocknung und Converting miteinander.

So ermöglicht der Etikettenhersteller dem

Ein abwaschbares Label von H.B. Fuller

PSA-Klebstof=nnovationen und nachhaltige Trends H.B. Fuller macht Etiketten zu innovativen Markenbotschaftern

OLBRICH GmbH

Teutonenstraße 2 - 10

46395 Bocholt

www.olbrich.com

PrägenBeschichten Trocknen

AntriebstechnikDrucken KalandrierenLaminieren

Wickeln

Technik begeistert – Spitzentechnologie überzeugt!

Innovative Maschinen und Anlagen für:

Tapeten

Bodenbeläge

Technische Textilien

Dekorfolien

Medikalprodukte

Sonderanwendungen

Selbstklebende Produkte

Maschinen- und Apparatebau

20

COATING & CONVERTING | C2 DEUTSCHLAND 65 | SEPTEMBER 2017

KLE

BST

OFFE

& A

UF

TR

AG

SS

YST

EM

E | M

AR

KT

BE

RIC

HT Einsatz von Ruß veränderte bei

konventionellen, einschichtigen

Haftklebstoffen jedoch

unweigerlich dessen Haftungs-

eigenschaften. Bislang war es

auch undenkbar, dass ein so

eingefärbter Haftkleber ein Zer-

-

mittelkontakt erhält. Bei der

Mehrschichttechnologie färben

wir nur die Zwischenschicht ein,

und zwar mit einem neuartigen

Pigment, das für den direkten

Lebensmittelkontakt geeignet

ist. Die Klebstoffschicht, die

unmittelbar auf das Substrat

wirkt, bleibt unverändert.“

Da für diese „haftungs-

wirksame“ Schicht ausschließlich bewährte

kann HERMAperfectOpaque problemlos

eingesetzt werden, ohne dass langwierige

und aufwändige Haftungs- und Verarbei-

tungstests durchgeführt werden müssen.

Damit einher geht ein sehr hohes Maß an

Flexibilität. Denn auf diese Weise lassen sich

Etikettenmaterialien und Haftkleber immer

wieder optimal für die jeweilige opake

Anwendung kombinieren. Somit reicht die

HERMA-Produktpalette von Folie über Papier

sogar bis hin zu Thermo-Eco-Haftmaterialien.

Dank der Mehrschichttechnologie soll es

nun erstmals möglich sein, dass opakes

Thermo-Haftmaterial mit Haftungseigen-

schaften ohne Kompromisse gefertigt

werden kann. Mit HERMAperfectOpaque

wird es außerdem auch möglich, opake

Thermo-Eco-Haftmaterialien zu produzie-

ren – also Thermo-Haftmaterialien ohne

Barriereschicht (Rückseitenstrich). Die

neuen Farbpigmente haben – im Gegensatz

zum bisher eingesetzten Ruß – keinen

Dunkelblaue Farbe erhält

die Weiße der Etiketten

Opake Etikettenmaterialien sind zum

Start des neuen HERMA-Sortiments stan-

dardmäßig zunächst mit zwei verschiedenen

Haftklebern ausgerüstet: HERMAperfectO-

paque 62Gpo und 62Dpo. Zu den Stärken

des 62Gpo zählen – neben der genannten

Migrationssicherheit – zum Beispiel

Anwendungen, bei denen eine extrem hohe

Anfangshaftung (Tack) erforderlich ist – trotz

kühl/feuchter Bedingungen. Der Haftkleber

62Dpo dagegen spielt seine

Stärken insbesondere bei der

Herstellung von blickdichten

Copy-/Laseretiketten und ihrer

späteren Verwendung aus: Er

verhindert, dass beim Konfek-

tionieren des Haftmaterials

Klebstoff an den Stanzkanten

austritt. Das gewährleistet

den optimalen Durchlauf der

Etiketten in allen Kopierern

und Druckern, auch wenn die

Etiketten keine umlaufende

Sicherheitskante haben.

Eingefärbt wird die

Zwischenschicht in beiden Fällen

mit dunkelblauer Farbe. „Tests

in unserem Entwicklungslabor

haben ergeben, dass man mit Schwarz die

Opazität nicht weiter steigern kann, aber

die Weiße des Etikettenmaterials dadurch

beeinträchtigt wird. Dunkelblau ist nach

unserer Einschätzung die bessere Wahl,

weil es die Weiße erhält“, so Dr. Nägele.

Die Nachfrage nach opaken Etikettenma-

terialien bewegt sich seit Jahren auf einem

gleichbleibend hohen Niveau. Entsprechende

Etiketten werden beispielsweise oftmals

für die Überklebung von Fehldrucken und

für die Lokalisierung von importierten oder

re-importierten Produkten verwendet.

„Da das Spektrum der Produkte und

Verpackungen sehr groß ist, ist der Gewinn

an Flexibilität für die Etikettendrucker ein

wichtiger Vorteil. Das gilt sowohl im Hinblick

auf die einsetzbaren Etikettenmaterialien als

auch in puncto Anwendungssicherheit.“

Selbst kritische Anforderungen lassen sich mit den neuen HERMA-

Haftklebern sicher erfüllen

24

KLE

BST

OFFE

& A

UF

TR

AG

SS

YST

EM

E | M

AR

KT

BE

RIC

HT

Nicht zu Unrecht

gelten Vliesstoffe

als sehr sensible und

schwierige Materialien bei

der Weiterverarbeitung.

für diesen Bereich müssen

besondere Anforderungen

erfüllen. Ihre Kompetenz

im Bereich der Vliesstoffe

konnte die Savaré Specialty

Adhesives vor wenigen

Monaten im Rahmen

der INDEX 2017 im schweizerischen Genf

unter Beweis stellen. Hier war das 1924

gegründete Familienunternehmen mit

zahlreichen Innovationen vertreten.

„Wir bieten eine große Bandbreite an

Hotmelt-Speziallösungen mit unterschiedli-

chen chemischen Ausgangsstoffen“, betont

Lorenzo Stella, Sales Manager bei Savaré.

„Vliesstoffe und Nonwovens gehören zu den

Converting-Prozessen in den Märkten, in

denen wir aktiv sind.“ Unter anderem bieten

die Klebstoffexperten aus Mailand kaut-

schuk-, APAO- und EVA-basierte Klebstoffe

mit niedriger bis hoher Viskosität, um alle

Kundenbedürfnisse erfüllen zu können.

Maßgeschneiderte Klebstoffe

„Die Anwendungsbereiche für unsere

unterstreicht Stella im Gespräch mit C2.

„Dazu gehört nicht nur der Bausektor (z.B.

Dachbahnen, thermische und akustische

Isolierungen, Fußbodenheizungen und

-isolierungen, usw.), sondern auch

Matratzen und Polstermöbel sowie

Geotextilien, Klebebänder, Etiketten,

Automotive-Anwendungen und viele mehr.“

Besonders stolz ist man bei Savaré auf

Auswahl von Klebstoffen, die den Kunden

des Unternehmens zur Verfügung steht.

vor allem über unsere Leidenschaft

und unsere Firmenethik“, sagt Stella.

„Als mittelgroßes Unternehmen sind

wir sehr agil und können uns zu

100 % auf Hotmelt-Technologie für

Dabei achten wir auf ein gutes und

vertrauensvolles Verhältnis zu unseren

langfristig verbunden bleiben.“

Auch in den Bereich Forschung

und Entwicklung wird bei Savaré

stark investiert: 4 % des Umsatzes

und 15 % der Mitarbeiter entfallen auf

diese Abteilung. Auf mehr als 950 m

steht dem Team eine hochmoderne

Arbeitsumgebung mit vielseitigem

Equipment zur Verfügung, um neue

Hotmelt-Technologien entwickeln zu können.

Sollen neue Klebstoffe auf ihre Leistung

hin überprüft, bzw. Prozesse evaluiert

werden, kommt der hauseigene „High-Speed

Test Stand“ zum Einsatz. Mit einer Arbeits-

geschwindigkeit von bis zu 800 m/min

können die Klebstoffe mit Hilfe der neuesten

Auftragstechnologien erprobt werden.

-

duktionslinien von Kunden repliziert werden,

Das Team von Savaré am Messestand auf der INDEX 2017 in Genf

Leidenschaftlich für die

KlebstofDndustrie Das italienische Familienunternehmen Savaré war im vergangenen Frühjahr mit

INDEX 2017 in Genf vertreten

Dekoration, Produktinformation DekoratiDekoratiDekoratiDekoratiDekoratiDekoratiDekoration, ProduktiDekoration, ProduktiDekoration, ProduktiDekoration, ProduktiDekoration, ProduktiDekoration, Produktion, Produktion, Produktion, Produktion, Produkti Produktinformation, Produktion, Produktinformation on, Produktinformation on, Produktinformation on, Produktinformation on, Produktinformation on, Produktinformation on, Produktinformation nformation mation nformation nformation nformation nformation und Kennzeichnungund Kennzeiund Kennzeiund Kennzeiund Kennzeichnungund Kennzeiund Kennzeiund Kennzeiund Kennzeiund Kennzeiund Kennzeichnungund Kennzeichnungund Kennzeichnungund Kennzeichnungund Kennzeichnungund KennzeichnungchnungchnungchnungWir sind die Experten für Rollen!Wir sind die Experten für Rollen!Wir sind die Experten für Rollen!Wir sind die Experten für Rollen!Wir sind die Experten für Rollen!Wir sind die Experten für Rollen!Wir sind die Experten für Rollen!Wir sind die Experten für Rollen!Wir sind die Experten für Rollen!Wir sind die Experten für Rollen!Wir sind die Experten für Rollen!Wir sind die Experten für Rollen!Wir sind die Experten für Rollen!Wir sind die Experten für Rollen!Wir sind die Experten für Rollen!Wir sind die Experten für Rollen!Wir sind die Experten für Rollen!Wir sind die Experten für Rollen!Wir sind die Experten für Rollen!Wir sind die Experten für Rollen!Wir sind die Experten für Rollen!Wir sind die Experten für Rollen!Wir sind die Experten für Rollen!Wir sind die Experten für Rollen!Wir sind die Experten für Rollen!Wir sind die Experten für Rollen!Wir sind die Experten für Rollen!Wir sind die Experten für Rollen!Wir sind die Experten für Rollen!Wir sind die Experten für Rollen!Wir sind die Experten für Rollen!Wir sind die Experten für Rollen!

SLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED ANDSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINES SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINES SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINESSLITTING, WINDING, COATING, LAMINATING, SPOOLING, LABELLING, PACKAGING, CUSTOMIZED AND SPECIAL MACHINES

Adolf Müller GmbH & Co. KGMaschinenfabrikMaschinenfabrikMaschinenfabrikMaschinenfabrikMaschinenfabrikMaschinenfabrikMaschinenfabrikMaschinenfabrikMaschinenfabrikMaschinenfabrikMaschinenfabrikMaschinenfabrikMaschinenfabrikMaschinenfabrikMaschinenfabrikMaschinenfabrikMaschinenfabrikMaschinenfabrikMaschinenfabrikMaschinenfabrikAm Bahnhof 3 • D-27383 Scheessel • Germany Am Bahnhof 3 • D-27383 Scheessel • Germany Am Bahnhof 3 • D-27383 Scheessel • Germany Am Bahnhof 3 • D-27383 Scheessel • Germany Am Bahnhof 3 • D-27383 Scheessel • Germany Am Bahnhof 3 • D-27383 Scheessel • Germany Am Bahnhof 3 • D-27383 Scheessel • Germany Am Bahnhof 3 • D-27383 Scheessel • Germany Am Bahnhof 3 • D-27383 Scheessel • Germany Am Bahnhof 3 • D-27383 Scheessel • Germany Am Bahnhof 3 • D-27383 Scheessel • Germany Am Bahnhof 3 • D-27383 Scheessel • Germany Am Bahnhof 3 • D-27383 Scheessel • Germany Am Bahnhof 3 • D-27383 Scheessel • Germany Am Bahnhof 3 • D-27383 Scheessel • Germany Am Bahnhof 3 • D-27383 Scheessel • Germany Am Bahnhof 3 • D-27383 Scheessel • Germany Am Bahnhof 3 • D-27383 Scheessel • Germany Am Bahnhof 3 • D-27383 Scheessel • Germany Am Bahnhof 3 • D-27383 Scheessel • Germany Am Bahnhof 3 • D-27383 Scheessel • Germany Am Bahnhof 3 • D-27383 Scheessel • Germany Am Bahnhof 3 • D-27383 Scheessel • Germany Am Bahnhof 3 • D-27383 Scheessel • Germany Am Bahnhof 3 • D-27383 Scheessel • Germany Am Bahnhof 3 • D-27383 Scheessel • Germany Am Bahnhof 3 • D-27383 Scheessel • Germany Am Bahnhof 3 • D-27383 Scheessel • Germany Am Bahnhof 3 • D-27383 Scheessel • Germany Am Bahnhof 3 • D-27383 Scheessel • Germany Am Bahnhof 3 • D-27383 Scheessel • Germany Am Bahnhof 3 • D-27383 Scheessel • Germany Am Bahnhof 3 • D-27383 Scheessel • Germany Am Bahnhof 3 • D-27383 Scheessel • Germany Am Bahnhof 3 • D-27383 Scheessel • Germany Am Bahnhof 3 • D-27383 Scheessel • Germany Am Bahnhof 3 • D-27383 Scheessel • Germany

Phone +49 4263 304 0 • Fax +49 4263 304 50 Phone +49 4263 304 0 • Fax +49 4263 304 50 Phone +49 4263 304 0 • Fax +49 4263 304 50 Phone +49 4263 304 0 • Fax +49 4263 304 50 Phone +49 4263 304 0 • Fax +49 4263 304 50 Phone +49 4263 304 0 • Fax +49 4263 304 50 Phone +49 4263 304 0 • Fax +49 4263 304 50 Phone +49 4263 304 0 • Fax +49 4263 304 50 Phone +49 4263 304 0 • Fax +49 4263 304 50 Phone +49 4263 304 0 • Fax +49 4263 304 50 Phone +49 4263 304 0 • Fax +49 4263 304 50 Phone +49 4263 304 0 • Fax +49 4263 304 50 Phone +49 4263 304 0 • Fax +49 4263 304 50 Phone +49 4263 304 0 • Fax +49 4263 304 50 Phone +49 4263 304 0 • Fax +49 4263 304 50 Phone +49 4263 304 0 • Fax +49 4263 304 50 Phone +49 4263 304 0 • Fax +49 4263 304 50 Phone +49 4263 304 0 • Fax +49 4263 304 50 Phone +49 4263 304 0 • Fax +49 4263 304 50 Phone +49 4263 304 0 • Fax +49 4263 304 50 Phone +49 4263 304 0 • Fax +49 4263 304 50 Phone +49 4263 304 0 • Fax +49 4263 304 50 Phone +49 4263 304 0 • Fax +49 4263 304 50 Phone +49 4263 304 0 • Fax +49 4263 304 50 Phone +49 4263 304 0 • Fax +49 4263 304 50 Phone +49 4263 304 0 • Fax +49 4263 304 50 Phone +49 4263 304 0 • Fax +49 4263 304 50 Phone +49 4263 304 0 • Fax +49 4263 304 50 Phone +49 4263 304 0 • Fax +49 4263 304 50 Phone +49 4263 304 0 • Fax +49 4263 304 50 Phone +49 4263 304 0 • Fax +49 4263 304 50 Phone +49 4263 304 0 • Fax +49 4263 304 50 Phone +49 4263 304 0 • Fax +49 4263 304 50 Phone +49 4263 304 0 • Fax +49 4263 304 50 Phone +49 4263 304 0 • Fax +49 4263 304 50

mueller-machines.com • [email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected]

Schleuter Maschinen- und ApparatebauGmbH & Co. KGGmbH & Co. KGGmbH & Co. KGGmbH & Co. KGGmbH & Co. KGGmbH & Co. KGGmbH & Co. KGGmbH & Co. KGGmbH & Co. KGGmbH & Co. KGGmbH & Co. KGGmbH & Co. KGIndustriestraße 5 • D-28876 Oyten • Germany Industriestraße 5 • D-28876 Oyten • Germany Industriestraße 5 • D-28876 Oyten • Germany Industriestraße 5 • D-28876 Oyten • Germany Industriestraße 5 • D-28876 Oyten • Germany Industriestraße 5 • D-28876 Oyten • Germany Industriestraße 5 • D-28876 Oyten • Germany Industriestraße 5 • D-28876 Oyten • Germany Industriestraße 5 • D-28876 Oyten • Germany Industriestraße 5 • D-28876 Oyten • Germany Industriestraße 5 • D-28876 Oyten • Germany Industriestraße 5 • D-28876 Oyten • Germany Industriestraße 5 • D-28876 Oyten • Germany Industriestraße 5 • D-28876 Oyten • Germany Industriestraße 5 • D-28876 Oyten • Germany Industriestraße 5 • D-28876 Oyten • Germany Industriestraße 5 • D-28876 Oyten • Germany Industriestraße 5 • D-28876 Oyten • Germany Industriestraße 5 • D-28876 Oyten • Germany Industriestraße 5 • D-28876 Oyten • Germany Industriestraße 5 • D-28876 Oyten • Germany Industriestraße 5 • D-28876 Oyten • Germany Industriestraße 5 • D-28876 Oyten • Germany Industriestraße 5 • D-28876 Oyten • Germany Industriestraße 5 • D-28876 Oyten • Germany Industriestraße 5 • D-28876 Oyten • Germany Industriestraße 5 • D-28876 Oyten • Germany Industriestraße 5 • D-28876 Oyten • Germany Industriestraße 5 • D-28876 Oyten • Germany Industriestraße 5 • D-28876 Oyten • Germany Industriestraße 5 • D-28876 Oyten • Germany Industriestraße 5 • D-28876 Oyten • Germany Industriestraße 5 • D-28876 Oyten • Germany Industriestraße 5 • D-28876 Oyten • Germany Industriestraße 5 • D-28876 Oyten • Germany Industriestraße 5 • D-28876 Oyten • Germany Industriestraße 5 • D-28876 Oyten • Germany Industriestraße 5 • D-28876 Oyten • Germany Industriestraße 5 • D-28876 Oyten • Germany

Phone +49 4207 996 0 • Fax: +49 4207 996 299 Phone +49 4207 996 0 • Fax: +49 4207 996 299 Phone +49 4207 996 0 • Fax: +49 4207 996 299 Phone +49 4207 996 0 • Fax: +49 4207 996 299 Phone +49 4207 996 0 • Fax: +49 4207 996 299 Phone +49 4207 996 0 • Fax: +49 4207 996 299 Phone +49 4207 996 0 • Fax: +49 4207 996 299 Phone +49 4207 996 0 • Fax: +49 4207 996 299 Phone +49 4207 996 0 • Fax: +49 4207 996 299 Phone +49 4207 996 0 • Fax: +49 4207 996 299 Phone +49 4207 996 0 • Fax: +49 4207 996 299 Phone +49 4207 996 0 • Fax: +49 4207 996 299 Phone +49 4207 996 0 • Fax: +49 4207 996 299 Phone +49 4207 996 0 • Fax: +49 4207 996 299 Phone +49 4207 996 0 • Fax: +49 4207 996 299 Phone +49 4207 996 0 • Fax: +49 4207 996 299 Phone +49 4207 996 0 • Fax: +49 4207 996 299 Phone +49 4207 996 0 • Fax: +49 4207 996 299 Phone +49 4207 996 0 • Fax: +49 4207 996 299 Phone +49 4207 996 0 • Fax: +49 4207 996 299 Phone +49 4207 996 0 • Fax: +49 4207 996 299 Phone +49 4207 996 0 • Fax: +49 4207 996 299 Phone +49 4207 996 0 • Fax: +49 4207 996 299 Phone +49 4207 996 0 • Fax: +49 4207 996 299 Phone +49 4207 996 0 • Fax: +49 4207 996 299 Phone +49 4207 996 0 • Fax: +49 4207 996 299 Phone +49 4207 996 0 • Fax: +49 4207 996 299 Phone +49 4207 996 0 • Fax: +49 4207 996 299 Phone +49 4207 996 0 • Fax: +49 4207 996 299 Phone +49 4207 996 0 • Fax: +49 4207 996 299 Phone +49 4207 996 0 • Fax: +49 4207 996 299 Phone +49 4207 996 0 • Fax: +49 4207 996 299 Phone +49 4207 996 0 • Fax: +49 4207 996 299 Phone +49 4207 996 0 • Fax: +49 4207 996 299 Phone +49 4207 996 0 • Fax: +49 4207 996 299 Phone +49 4207 996 0 • Fax: +49 4207 996 299

schleuter.com • [email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected][email protected]

Discounts

for purchase within 12 months (insertion year). Discounts will be given according to the most favorable scale. Combination within the C2 Magazine Group (C2 Deutschland, C2 Europe, C2 International and C2 Asia)

Frequency rates Volume rates

2 adverts 3% 3 adverts 5% 2 pages 5% 5 adverts 10% 3 pages 10% 10 adverts 15% 6 pages 15% 20 adverts 20% 10 pages 20%

All charges are discountable with the exception of technical fees and postal charges.

Surcharges

Placement: Inside cover or back cover €4320C2 International €2160

Colour: per special colour (outside the European scale) €990

Format:

No bleed surcharge

COATING &CONVERTING

F A C H M A G A Z I N F Ü R D I E C O A T I N G - U N D C O N V E R T I N G - B R A N C H E

Ausgabe 65

Marktbericht: Klebstoffe & Auftragssysteme (ab S.15)

Converter des Monats:Nova Films & Foils/USA (ab S.39)

Marktbericht: Etikettenverarbei-tung & -veredelung (ab S.25)

September 2017

LABELEXPO EUROPE

VORSCHAU

EXTRUSION & EXTRUSIONSBESCHICHTUNG

De

uts

che

r Fa

chve

rla

g G

mb

H •

Ma

inze

r La

nd

str.

25

1 •

60

32

6 F

ran

kfu

rt a

m M

ain

/ G

erm

an

y •

ww

w.c

2-d

eu

tsch

lan

d.d

e

Alles rund um die Veredelung und Verarbeitung von Fol ie , Vl iesstoff und Papier

All prices subject to current VAT rates.

8

Page 9: globally published magazines for the coating and ... · 11.-13. Oktober Lucca, Italien Edipap Srl Paper Middle East 24.-26. Oktober Cairo International Convention Centre (CICC) Nile

2018 | C2 Coating & Converting www.c2-europe.eu

Bound inserts Formats (width x height) Prices 2 sheets (=4 pages) 420 x 297mm €5700 3 sheets (=6 pages) 616 x 297mm €6780 4 sheets (=8 pages) 812 x 297mm €7700

Loose inserts Formats (width x height) Maximum 205 x 290mm Minimum paper thickness 70g/m²

Prices up to 25g €4950 up to 50g €5850

Before acceptance and confirmation, a binding sample, if necessary a dummy, with size and weight specifications is required. Inserts or supplements may only advertise for the sales program of the advertiser.

They must be designed in a manner according to postal regulations so that they can not be mistaken for the editorial section. The placement of inserts depends on the technical possibilities.

Inserts or supplements must be designed in the type and design so that an additional preparation and processing is omitted. Difficulties and additional folding and gluing work will be charged separately.

Contacts

All prices are subject to current VAT.

Consulting, Bookings:

Nina [email protected].: +49 69 7595-1227

Heidrun Dangl (Management)[email protected].: +49 69 7595-2563

Data delivery, invoices,

documentation:

Central Advertising [email protected].: +49 69 7595-2963Fax: +49 69 7595-2960

Terms of payment

3% discount for payment in advance invoice or order confirmation, or direct

invoice date. Total within 30 days of the invoice date.

Bank details

Frankfurter Sparkasse, Frankfurt am Main Account: 34 926 Bank code: 500 502 01 BIC: HELADEF1822 IBAN: DE56 5005 0201 0000 0349 26

Delivery address

printec offset medienhausOchshäuser Straße 4534123 Kassel / Germany

Please state the tilte and issue (e.g. C2 Deutschland, No. …)

Special forms of advertising: Bound inserts, inserts, stick-ons

ADVERTISING FORMATS AND PRICES

9

Page 10: globally published magazines for the coating and ... · 11.-13. Oktober Lucca, Italien Edipap Srl Paper Middle East 24.-26. Oktober Cairo International Convention Centre (CICC) Nile

2018 | C2 Coating & Converting www.c2-europe.eu

C2 DEUTSCHLAND EDITORIAL PROGRAM

AusgabeC2 Deutschland

Issue 67

C2 Deutschland

Issue 68

C2 Deutschland

Issue 69

C2 Deutschland

Issue 70

C2 Deutschland

Issue 71

C2 Deutschland

Issue 72

Advertising

deadlineJanuary 23, 2018 March 13, 2018 May 4, 2018 July 10, 2018 September 4, 2018 November 13, 2018

Editorial

deadlineJanuary 16, 2018 March 6, 2018 April 27, 2018 July 3, 2018 August 28, 2018 November 6, 2018

Publication

dateFebruary 6, 2018 March 27, 2018 May 22, 2018 July 24, 2018 September 18, 2018 November 27, 2018

Trade fairsLOPEC preview

Print4All preview

C2 Converting

Summit preview

C2 Converting

Summit reviewFachpack preview

ICE preview, part 1

Topic

• Winding

Technology

• Knives & Knife

Holders

• Waste Air,

Disposal &

Recycling

• Metallizing &

Vacuum Coating

• Printed Electronics

& Intelligent Films

• Static Control,

Web Cleaning

• Rollers & Sleeves

• Nonwovens

• Print Finishing

• Slitting Rewinding

• Adhesives &

Application

Systems

• Automotive &

Mobility

• Coating &

Lamination

• Web Inspection,

Test & Measure-

ment

• Innovative Packa-

ging Solutions

• Extrusion &

Extrusion Coating

• Die Cutting,

Embossing &

Perforating

• Pretreatment

Trade fairs

LOPEC, Munich

14.-15.03.2018Print4All, Milan

29.05.-01.06.2018Converting Summit,

Hamburg

27.-29.06.2018

ICE South East Asia,

Bangkok

05.-07.09.2018

Fachpack, Nuremberg

25.-27.09.2018FAKUMA,

Friedrichshafen

16.-20.10.2018

MKVS, Munich

22.-24.10.2018ICE, Munich

12.-14.03.2019

10

Page 11: globally published magazines for the coating and ... · 11.-13. Oktober Lucca, Italien Edipap Srl Paper Middle East 24.-26. Oktober Cairo International Convention Centre (CICC) Nile

2018 | C2 Coating & Converting www.c2-europe.eu

AusgabeC2 Europe

Issue 67

C2 Europe

Issue 68

C2 Europe

Issue 69

C2 Europe

Issue 70

C2 Europe

Issue 71

C2 Europe

Issue 72

Advertising

deadlineFebruary 13, 2018 April 10, 2018 June 12, 2018 August 14, 2018 October 9, 2018 December 4, 2018

Editorial

deadlineFebruary 6, 2018 April 3, 2018 June 5, 2018 August 7, 2018 October 2, 2018 November 27, 2018

Publication

dateFebruary 27, 2018 April 24, 2018 June 26, 2018 August 28, 2018 October 23, 2018 December 18, 2018

Trade fairsLOPEC preview

Print4All/

IPACK-IMA preview

Fachpack preview ICE

preview, part 1

Topic

• Knives & Knife

Holders

• Automation &

Drives, Handling

• Pretreatment

• Print Finishing

• Printed Electronics

& Intelligent Films

• Static Control,

Web Cleaning

• Coating &

Lamination

• Nonwovens

• Waste Air, Dispo-

sal & Recycling

• Slitting &

Rewinding

• Innovative Packa-

ging Solutions

• Automotive &

Mobility

• Rollers & Sleeves

• Web Inspection,

Test & Measure-

ment

• Metallizing &

Vacuum Coating

• Extrusion &

Extrusion Coating

• Die Cutting,

Embossing &

Perforating

• Winding

Technology

Trade fairs

LOPEC, Munich

14.-15.03.2018Print4All, Milan

29.05.-01.06.2018Fachpack, Nuremberg

25.-27.09.2018ICE South East Asia,

Bangkok

05.-07.09.2018

FAKUMA,

Friedrichshafen

16.-20.10.2018

ICE, Munich

12.-14.03.2019

C2 EUROPE EDITORIAL PROGRAM

11

Page 12: globally published magazines for the coating and ... · 11.-13. Oktober Lucca, Italien Edipap Srl Paper Middle East 24.-26. Oktober Cairo International Convention Centre (CICC) Nile

2018 | C2 Coating & Converting www.c2-europe.eu

AusgabeC2 International

Issue 67

C2 International

Issue 68

C2 International

Issue 69

C2 International

Issue 70

C2 International

Issue 71

C2 International

Issue 72

Advertising

deadlineFebruary 13, 2018 April 10, 2018 June 12, 2018 August 14, 2018 October 9, 2018 December 4, 2018

Editorial

deadlineFebruary 6, 2018 April 3, 2018 June 5, 2018 August 7, 2018 October 2, 2018 November 27, 2018

Publication

dateFebruary 27, 2018 April 24, 2018 June 26, 2018 August 28, 2018 October 23, 2018 December 18, 2018

Trade fairsLOPEC preview

Print4All/

IPACK-IMA preview

Fachpack preview ICE

preview, part 1

Topic

• Knives & Knife

Holders

• Automation &

Drives, Handling

• Pretreatment

• Print Finishing

• Printed Electronics

& Intelligent Films

• Static Control,

Web Cleaning

• Coating &

Lamination

• Nonwovens

• Waste Air, Dispo-

sal & Recycling

• Slitting &

Rewinding

• Innovative Packa-

ging Solutions

• Automotive &

Mobility

• Rollers & Sleeves

• Web Inspection,

Test & Measure-

ment

• Metallizing &

Vacuum Coating

• Extrusion &

Extrusion Coating

• Die Cutting,

Embossing &

Perforating

• Winding

Technology

Trade fairs

LOPEC, Munich

14.-15.03.2018Print4All, Milan

29.05.-01.06.2018Fachpack, Nuremberg

25.-27.09.2018ICE South East Asia,

Bangkok

05.-07.09.2018

FAKUMA,

Friedrichshafen

16.-20.10.2018

ICE, Munich

12.-14.03.2019

C2 INTERNATIONAL EDITORIAL PROGRAM

12

Page 13: globally published magazines for the coating and ... · 11.-13. Oktober Lucca, Italien Edipap Srl Paper Middle East 24.-26. Oktober Cairo International Convention Centre (CICC) Nile

2018 | C2 Coating & Converting www.c2-europe.eu

Issue Topic Trade fairs

C2 Asia 29 / Issue March 2018

Ad copy Deadline: 22.02.2018Publication Date: 08.03.2018

• Extrusion & Extrusion Coating

• Die Cutting, Embossing & Perforating

• Winding Technology

Chinaplas, Shanghai 24.-27.04.2018Labelexpo SE Asia, Bangkok 10.-12.05.2018

APFE, Shanghai 25.-27.05.2018

C2 Asia 30 / Issue July 2018

Ad copy Deadline: 14.07.2018Publication Date: 28.07.2018

• Pretreatment

• Printed Electronics & Intelligent Films

• Handling & Automation

C2 Asia 31 / Issue October 2018

Ad copy Deadline: 13.10.2018Publication Date: 27.10.2018

• Coating & Lamination

• Print Finishing

• Nonwovens

ICE SE Asia, Bangkok 05.-07.09.2018

C2 Asia 32 / Issue December 2018

Ad copy Deadline: 08.12.2017Publication Date: 22.12.2017

• Slitting Rewinding

• Rollers & Sleeves

• Static Control, Web Cleaning

C2 ASIA EDITORIAL PROGRAM / FORMATS

Formats width x height in mm Advertising in the type area Advertising with bleed*plus 4 mm bleed margin

2/1 pages - 420 x 285*

1/1 page 185 x 250 210 x 285*

1/2 junior page 122 x 182 -

1/2 page horiz / vert 90 x 250 / 185 x 125 100 x 285 / 210 x 145*

1/3 page horiz / vert 58 x 250 / 185 x 82 71 x 285 / 210 x 103*

1/4 page horiz / vert / 2 column 42 x 250 / 90 x 125 / 185 x 60 56 x 285 / 104 x 140 / 210 x 75*

Deu

tsch

er

Fa

ch

verl

ag

Gm

bH

• M

ain

zer

La

nd

str.

25

1 •

60

32

6 F

ran

kfu

rt a

m M

ain

/ G

erm

an

y •

ww

w.c

2-a

sia

.co

m

25 | 2017

PRE-TREATMENT

Innovations for film, nonwovens and paper convertingInnovations for film, nonwovens and paper converting | |

S P E C I A L I S E D M A G A Z I N E F O R T H E C O AT I N G A N D C O N V E R T I N G I N D U S T R Y

Issue

PRINTED ELECTRONICS

6

COATING & CONVERTING | C2 ASIA 25 | MARCH 2017

PR

E-T

RE

AT

ME

NT

|

MA

RK

ET

RE

PO

RT energy dissipated into one square metre of the substrate. Measured

in W.min/m² it is calculated by dividing the applied corona power (P)

in Watts, by the linear web speed (v) in metres per minute, and by the

treatment/discharge width (CB) of the corona system (CB) in metres.

D= P/(v x CB)

The applied corona dosage couples the corona power to the web

speed and can be set in direct relation to the achievable dyne level

on the substrate surface. The critical task in designing or optimising a

printing or coating process is to determine the optimal corona dosage,

which is high enough to achieve the required result but not so high as

to over treat the surface and thus damage the substrate.

Selecting the correct Corona dosage is ideally carried out using

substrate test samples in a laboratory environment. For these tests,

only small quantities of the material substrates need to be used, cutting

costs and waste, and moreover, leaving production lines open for

actual production.

Fully-integrated lab systemSOFTAL Corona & Plasma GmbH offers a solution in the form of

a fully integrated table Corona system, the LTC. A motorised subst-

rate holder carries the substrate under a 230 mm wide electrode at

selected speeds up to 50m/min, and with a corona power range of

10 to 400W, dosages from 1 to over 1500W.min/m² can be selected.

Moreover, the generator, transformer, motor drive and ozone destruc-

tion unit are all completely integrated in the system, eliminating any

requirement for peripheral equipment. The motorised substrate holder

provides constant speed through the Corona discharge guaranteeing

fully reproducible treatment results. Capable of treating conductive

and non-conductive substrates, the LTC is reported to provide all the

correct corona dosage required for each new product. Furthermore, by

using the LTC, process know-how can be substantially increased at the

location of the production facility by minimising uncertainties of trans-

port and storage issues raised through using external laboratories. Old,

pre-treated material substrates are easily tested on-site with minimal

waste to set the correct corona dosage for the required refreshment

treatment.

In conjunction with the LTC, SOFTAL offers surface tension test inks

repeatable and accurate results for use in process development and

quality assurance laboratories.

The corona lab system SOFTAL LTC

7

COATING & CONVERTING | C2 ASIA 25 | MARCH 2017

PR

E-T

RE

AT

ME

NT

|

MA

RK

ET

RE

PO

RT

A-

facturing process – which is extrusion. The polar groups that

are created here, however, will return back to the inside – and

they lose surface tension or adhesion. This is the reason why many

converters make use of a “refreshing” corona treatment before the

line. The experts of AFS Entwicklungs- + Vertriebs GmbH, which is

to be metallized due to optical reasons or the improvement of their

In order to generate a corona discharge and to ignite the plasma

within the electrode gap, one requires high-frequency high voltage

between the two electrodes, which do not only have to be separated

by the gas gap, but also by a dielectric. This dielectric consists either

of a silicon coating on the pre-treatment roller or a ceramic sleeve

on the electrodes that are aligned surrounding the roller. For the pre-

treatment of conductive materials, the dielectric must be located on

most corona pre-treatment stations that are used for refreshment are

equipped with ceramic electrodes.

Full-surface pre-treatment not desired Nonetheless, there are applications in which a full-surface pre-

welded after printing, the surface under the welding seam must not be

pre-treated. These partial gaps are enabled by segmented electrodes.

place, the single material segments are simply folded up. Subsequently,

no discharge will happen, and therefore no pre-treatment. In this case,

the dielectric must always be on the pre-treatment roller, as the narrow

electrode segments cannot be coated with a dielectric.

Up to now, the converter had to decide, whether he preferred to

omit non-conductive materials, or instead chose the option of being

able to treat conductive materials. This may result in major limitations

-

ble of incorporating enough space

for two different corona lines.

AFS has reacted to this market

requirement and developed its new

Flexidyne corona line with electrode

revolver. By means of two lockable

levers, the desired electrode can be

chosen. In order to be able to treat

even at high speeds, there is a choice

between 2x4 ceramic electrodes or

two segment sequences with up

to nine discharge lines. The pre-

treatment experts from Germany are

convinced that their new line offers

extremely compact dimensions.

No compromises

A new corona line from AFS offers

speeds thanks to a built-in electrode revolver

Corona discharge against a conductive substrate

8

COATING & CONVERTING | C2 ASIA 25 | MARCH 2017

PR

E-T

RE

AT

ME

NT

|

MA

RK

ET

RE

PO

RT

C2: Mr Kalwar, could you please provide our readers with a short

overview over the development of your company in the last few years?

Markus Kalwar: Sure. Our company looks back at a more than

50 year-long history. Founded in 1965, we have installed more than

5000 corona systems worldwide so far. At kalwar, the last few years

and plasma technology. In the course of this specialisation, we have

also split up our business units into three autonomous companies

as service (kalwar CSP). In terms of technology, kalwar has not only

functionalised calvasol as an alternative to coating, but also focused

on niche applications within the market. Moreover, we were working

constantly on the automatized and adjustable calvatronFLEXelektrode

for an optimal and even surface treatment. Due to climate changes,

the calvatron lines were adapted so that they can produce without

“Full competence in chemistry and surface technology”

In an exclusive interview with C2, Markus Kalwar, one of the managing directors at Kalwar group from Halle, Germany, talks about the versatile calvasol technology and attractive leasing models

The NX series for foam treatment in operation

13

PR

E-T

RE

AT

ME

NTC2: How did your market presence develop in the recent past?

A. Mennucci: The experience that made us world leaders in the

sector of wide corona treaters has been transferred on the small

machines as well, where there is a larger competition that in many

cases has not been able to mature the necessary competences to reach

a satisfactory quality level. Starting in 2009, when many companies

in the plastics industry have suffered from the global crisis, we have

reached really positive results in opening up new important markets.

Among our customers is a multitude of important OEMs (extrusion and

converting line manufacturers) in Europe and North America. These

OEMs supply their machines all over the world. In order to be able to

maintain and follow our equipment throughout its lifespan, we have

developed a strong organisation in terms of service over the years.

In some regions we have local agents that are able to provide a

thanks to our own group of engineers. In China, where we have a

say that a fast and competent service is one of the characteristics that

distinguish ME.RO on the market.

kroenert

18

COATING & CONVERTING | C2 ASIA 25 | MARCH 2017

PR

INT

ED

ELEC

TR

ON

ICS

|

MA

RK

ET

RE

PO

RT

Not only the sports community may

technology. Earlier this year, the American

experts introduced a new walking app

called Sensoria Walk. The new app works

with the company’s 2015 CES Innovation

Award Honoree smart socks to help its

wearer track daily activity including steps,

cadence and distance during rehabilitation

after a stroke or post-surgery – with the

ultimate goal of speeding up overall reco-

very time.

“According to a 2013 research study

published by the Mayo Clinic, there is a

direct correlation between activity and

faster recovery time,” underlines Sensoria

CEO Davide Vigano. “However, most wrist

worn wearable devices cannot accurately

detect the activity of people with limited

mobility, such as elderly patients or patients

recovering from surgery or using a walker.

Sensoria Walk aims to deliver a more

accurate tool for patients and caregivers to

track and evaluate their recovery progress.”

Sensoria’s textile pressure sensor

technology is infused directly in its smart

socks, which connect to the electronic

anklet. This means individuals are not

required to wear wristband trackers that

are typically designed for general wellness.

The Sensoria smart socks, along with the

walking app integration, provide a more

accurate way to monitor activity even

when slow cadence, short stride length,

or use of walking aids is required. The

Sensoria Walk App features an intuitive

interface that highlights a user’s progress

history, goals, total activity time and other

detailed analytics.

Help for neurological

patients Moreover, the innovation can help

monitoring activity in patients suffering

from neurological diseases. As an exam-

ple, studies of Parkinson’s disease show

balance, gait and motor condition. Every

year, 50 000 people in the US alone are

diagnosed with Parkinson’s disease, a

neurological disorder that causes tremors,

slurred speech and limited mobility. The-

refore, patients suffering from the disease

-

nologies – Fitbit’s trackers and Sensoria’s

smart socks – to gather data about activity

levels and the progression of the disease.

According to a University of Washington

assistant professor of rehabilitation

medicine, “in the past, people have used

diaries to track activity, and people tend

to overestimate their physical activity,”

said Dr Sujata Pradhan, who is leading

the study. More exact information, she

hopes, will enable earlier discovery and

treatment of Parkinson’s symptoms. Prad-

han thinks the sensors will pick up subtle

changes in patients’ gait not evident to

the human eye – data that could help her

create assessments that identify disease

symptoms at an earlier stage. “People

are usually referred for rehabilitation only

balance or start falling,” Pradhan said.

and walking appear later in disease pro-

gression. If we bring more awareness to

these subtle early symptoms, people will

start referring to physical therapy earlier.”

Activity tracking for individuals with limited mobility

15

COATING & CONVERTING | C2 ASIA 25 | MARCH 2017

PR

E-T

RE

AT

ME

NT

|

MA

RK

ET

RE

PO

RTThe ozone in the electrical discharge is

accelerated onto the surface, which in turn

forms new carbonyl groups with a higher sur-

face energy. The result is an improvement of

the chemical connection (dyne/cm) between

the molecules in the plastic and the applied

media/liquid. “Importantly, this surface treat-

ment does not reduce or change the strength

of the substrate, and nor does it change the

appearance of the material,” he said. Corona

treatment changes only the top molecule

chains, which are 0.00001 micron thick.

Determination of

treatment level

The effectiveness of Corona treatment

characteristics and different amounts of slip and additives, which will

determine the effect of the Corona treatment. There are no limits with

regard to the materials that can be Corona treated, but the required

intensity of the treatment, measured in watt/min/m2, may vary signi-

The treatment level can be calculated by using the following

formula:

Power (Watt) = T x S x W x M

P = Total Power (Watt) required

T = Number of sides to Treat (single/double sided)

S = Line Speed (in metres per minute)

W = Film Width (in metres)

M = Material factor (required Watt per m² per minute)

The exact value is best determined by testing a sample of the

obtained dyne level can decrease and it may be necessary to Corona

treat the material again just before use. When a material contains

“Storage conditions and temperature can also affect the loss of Corona

treatment. Generally speaking, the higher the amount of slip, the

quicker it is likely to decay,” Eisby comments. “It has also been proven

be totally resistant to printing just 24 hours after treatment, and it may

the treatment inline with the printer,” he adds.

and then use a refreshment treatment, if necessary, just before the

liquid or media is supplied to the surface in the converting process,”

he concludes. If the science of corona treatment is lost on many, the

Vetaphone claims a market share in narrow web of around 80%, and

packaging. Family Eisby certainly has the background and pedigree to

achieve that aim …

An example for the improvement of adhesion thanks to corona

20

COATING & CONVERTING | C2 ASIA 25 | MARCH 2017

PR

INT

ED

ELEC

TR

ON

ICS

|

MA

RK

ET

RE

PO

RT

SmartKem is best known for its development of the truFLEX

-

tion of patent allowance for its semiconductor material in China, a

key market for the roll-out of its technology platform with display

manufacturers across Asia.

This comes at a time when analysts predict a US$28.7bn invest-

ment in OLED production across South Korea, Japan and China in

2016-2017, and SmartKem, as a leading manufacturer of organic

semiconductor materials, is now strengthening its position within the

OLED display industry in China.

Whilst Samsung currently serves approx. 90% of today’s OLED

market, strong competition is beginning to emerge from China. Indeed,

Chinese panel manufacturers are beginning to switch investments from

building LCD facilities to new OLED facilities with many manufacturers

setting their sights on new application markets for rigid and impor-

Collaboration is crucial

Steve Kelly, CEO and founder of SmartKem, said: “Successful col-

laboration is crucial in helping China to become a key stakeholder and

competitor in the global OLED display industry. As the Chinese OLED

OLED production will only increase as it turns its focus to designing

and developing its own products rather than manufacturing someone

else’s.” There is a clear commitment to encourage high-tech research

-

vation and high technological standards. “Our new patent allowance

places SmartKem in an excellent position to consolidate and strengthen

our existing position within the Chinese display sector with our ground-

breaking semiconductor platform,” he continued.

“China no longer wants to be seen as simply the ‘production

house of the world’. It now wants to be at the forefront of tech-

nological innovation, supporting value-added industries, to spur its

economy. Global partnerships within the display supply chain are

essential to open up new opportunities for both Chinese and over-

seas companies; for while China can gain an incredible advantage

from overseas innovations in new materials, foreign companies are

also very much aware that they need China to provide a market. It is

clear from current and planned Chinese investment that they intend

to be a key player in this arena.”

Semiconductor pioneer sets its sights on China

display industry

5

COATING & CONVERTING | C2 ASIA 25 | MARCH 2017

PR

E-T

RE

AT

ME

NT

|

MA

RK

ET

RE

PO

RT

Small and clever

Just in time for ICE Europe 2017, the corona and plasma specialist SOFTAL from Hamburg, Germany, unveils its brand-new Laboratory Table Corona Station

The development of new print and con-

verting applications is never a straight-

forward proposition. Coatings and

inks being presented to a surface must be

matched to the topography of the substrates

being processed. This applies for existing

production lines, and also during the speci-

-

between the ink or coating and the surface

of the substrate is surface tension (mN/m).

One of the most popular processes currently

utilised to modify the surface tension of a

substrate surface is corona discharge. By

treating the surface of the substrate with a

Corona discharge, the surface tension of the

substrate can be raised to correspond to the

parameters of the coating or ink requisite for

adhesion or wettability.

Not only in development, but also in the

production environment, the question often

arises: “How intense should the Corona

discharge be for optimal performance?” This

is notably the case in converting operations

where older pre-treated substrates have lost

surface tension due to the associated ageing

with storage time. In many cases a “refres-

hing” corona discharge treatment will return

the surface energy of the substrate surface to

a higher level. However, care must be taken

not to over treat in such cases.

Corona dosageThe level of corona treatment applied

to a substrate is referred to as the corona

dosage. This is an industry standard para-

Deu

tsch

er

Fa

ch

verl

ag

Gm

bH

• M

ain

zer

La

nd

str.

25

1 •

60

32

6 F

ran

kfu

rt a

m M

ain

/ G

erm

an

y •

ww

w.c

2-a

sia

.co

m

25 | 2017

PRE-TREATMENT

Innovations for film, nonwovens and paper convertingInnovations for film, nonwovens and paper converting | |

S P E C I A L I S E D M A G A Z I N E F O R T H E C O AT I N G A N D C O N V E R T I N G I N D U S T R Y

Issue

PRINTED ELECTRONICS

Advertisement sizes C2 Asia

Magazine dimensions: 210mm x 285mm Add. 4mm bleed on all sides for advertisements with bleed.

13

Page 14: globally published magazines for the coating and ... · 11.-13. Oktober Lucca, Italien Edipap Srl Paper Middle East 24.-26. Oktober Cairo International Convention Centre (CICC) Nile

2018 | C2 Coating & Converting www.c2-europe.eu

1 Journal format: 210mm wide x 297mm high Type area: 185mm wide x 255mm high

2 Printing and Sheet offset binding processes: Staple binding Paper quality: Cover:

200g/m², woofree, white, glossy, picture print Contents:

100g/m², woodfree, white, glossy, picture print Dot gain values: 40% area: 14% (tolerance +/- 3%)

80% area: 11% (tolerance +/- 2%) Minor dot gain deviations may occur due to the tolerance of sheet offset.

3 Data transfer: Via FTP, e-mail or CD-ROM

4 Data formats: Data is required in digital format PDF/X-3, compiled according to ISO Coated v2. Please avoid sending unprotected files. ll fonts used should be embedded. Half-tone pictures are required to have at least 250 dpi resolution.

5 Colours: According to European colour scale Colour sequence: Black, cyan, magenta, yellow

6 Proof: Colour guarantee digital/reference proof (paper simulation product paper C2 magazines)with relevant measurement elements.

7 Archiving of data: Data will be archived. Unchanged repetition is therefore possible in general, however there will be no data guarantee.

8 Warranty: We assume no liability for the printing result due to delivery of incomplete or incorrect data (text, colours, images). Incorrect exposure due to incomplete or faulty files, incorrect settings or incomplete information will be invoiced. This also applies to any additional typesetting and litho, as well as for the creation of new proofs.

9 Contact: Central Advertising Service Tel.: +49 69 7595-2963 Fax: +49 69 7595-2960 [email protected]

10 Printer: printec offset medienhaus Ochshäuser Straße 45 34123 Kassel / Germany

C2 Coating & Converting - formats and technical data

FORMATS AND TECHNICAL DATA

14

Page 15: globally published magazines for the coating and ... · 11.-13. Oktober Lucca, Italien Edipap Srl Paper Middle East 24.-26. Oktober Cairo International Convention Centre (CICC) Nile

2018 | C2 Coating & Converting www.c2-europe.eu

The meeting point for the German speaking converting industry

The C2 Converting Summit takes place for the 9th time in Hamburg in 2018.

The event has established itself as the annual industry networking meeting of the German-speaking converting industry:

Here, suppliers and users get together to discuss exciting future trends and growth markets. We only invite speakers who have something to say and won‘t bore the attendees with promotional lectures.

The Summit is the ideal opportunity for decision makers to learn all about the latest trends in the processing and finishing of film, nonwoven and paper and to extend their networks. All of this takes place in an exclusive setting and combined with an attractive supporting programme.

www.c2-deutschland.de/summit

C2 CONVERTING SUMMIT

Sponsoring

Deutscher Fachverlag GmbH

Mainzer Landstraße 251

60326 Frankfurt am Main

www.c2-deutschland.de/summit

E-Mail: [email protected]

Tel.: +49 69 7595-2563

JETJETJETZTJETJETJETZTJETJETJETZTJETZTJETJETZTJETJETJETJETZTJETZTJETZTJETZTJETZTJETJETZTJETZTJETZTJETZTJETZTZTJETZTJETZTZTJETZTJETZTZTJETZTJETZT

BUCHEN

BUCHEN

Sie sind Entscheider der Papier und Folien verarbeitenden Industrie?

Dann informieren Sie sich durch top-aktuelle Vorträge, bisher unver-

öffentlichte Marktdaten und exklusive Insider-Informationen über die

Zukunftsperspektiven unserer Branche!

Lassen Sie sich durch die einmalige Atmosphäre der Glas-

kuppel des Hotel Hafen Hamburg – eine der attraktivsten

Tagungsstätten Deutschlands – inspirieren!

Nutzen Sie unser Networking-Angebot und treffen Sie Conver-

ting-Anwender und -Anbieter in entspannter Atmosphäre.

27. bis 29. Juni 2018

Hotel Hafen Hamburg, Hamburg

Für die Zukunft gerüstet -So meistern Converting-Unternehmen

neue Herausforderungen in

Produktion, Vertrieb und Marketing

Einen Eindruck von der diesjährigen

Veranstaltung und allgemeine Informationen

www.c2-deutschland.de/summit

Buchen Sie jetzt!

Main sponsor

• Flyer in the conference folder• Roll-up display in the foyer • Logo imprint on all advertising

materials• Logo imprint on the napkins

at all meals • Sponsoring of the Dinner• Advertising materials during

the evening event• Banner on the Summit website

Overall price of €3500

Premium sponsoring

• Banner on the website• Logo imprint on the napkins• Roll-up display in the foyer• Display of flyers or insertion of

materials in the conference folder• Including one participant at the

Converting Summit

Overall price of €2950

Further possibilities:

• Sponsoring of the evening dinner: €2500• Sponsoring of the Get-together: €2100• Exclusive sponsoring of the conference meals: €2100• Further sponsoring opportunities upon request.

Delivery of the sponsoring materials by 25 June 2018Hotel Hafen Hamburg - heading: Converting Summit 2018Seewartenstraße 920459 Hamburg, Germany

SAVE THE DATE

27. - 29. Juni 2018

15

Page 16: globally published magazines for the coating and ... · 11.-13. Oktober Lucca, Italien Edipap Srl Paper Middle East 24.-26. Oktober Cairo International Convention Centre (CICC) Nile

2018 | C2 Coating & Converting www.c2-europe.eu

0

20000

40000

60000

80000

100000

120000

140000

160000

2013 2014 2015 2016 2017

2333929245

38182

81562

141367

2472830146

38576

5787962607

ONLINE ADVERTISING

Banner advertisements on the C2 websites

www.c2-deutschland.de - www.c2-europe.eu - www.c2-int.com

Leaderboard

Size: 700w x 90h px Price: €485 per month

Standard banner (rotating)

Size: 210w x 54h px Price: €890 per year

A constant increase in unique visitors

www.c2-deutschland.de, www.c2-europe.eu, Unique Visits 2013 - 2017, effective November 24, 2017

Advertisements in the C2 email newsletters

The email newsletters of C2Europe, C2 Deutschland and C2 International are distributed monthly to more than 35 000 converters.

Leaderboard

Size: 540w x 120h px Price: €530 per month*

Standard banner

Size: 160w x 160h px Price: €320 per month*

Advertorial

50 words Price: €390 per month*

Special offers

Leaderboard + Advertorial Price: €850 per month*Standard banner + Advertorial Price: €650 per month*Further discounts upon request.

* only available as package with 3 distributions per month

All prices subject to current VAT rates. Online and banner advertisements are for a 12-month period, after which they will be automatically renewed for another year at the particular annual charge unless cancelled in writing 6 weeks before the end of the invoicing period.

www.c2-europe.eu

www.c2-deutschland.de

16

Page 17: globally published magazines for the coating and ... · 11.-13. Oktober Lucca, Italien Edipap Srl Paper Middle East 24.-26. Oktober Cairo International Convention Centre (CICC) Nile

2018 | C2 Coating & Converting www.c2-europe.eu

ONLINE SUPPLIERS DIRECTORY

Online Suppliers Directory

www.c2-lv.de / www.c2-sd.eu

C2 offers a comprehensive online suppliers directory for the converting industry. A basic entry is free and consists of company name and address, as well as a listing under one product/service category.

A full entry in the buyers guide costs 270 Euro per year. In addition to the address and contact details it includes a product listing in three categories, your company logo and a short description of what your company offers, as well as a direct hyperlink to your homepage.

Full entries will receive priority over basic entries.

All prices subject to current VAT rates. Online and banner advertisements are for a 12-month period, after which they will be automatically renewed for another year at the particular annual charge unless cancelled in writing 6 weeks before the end of the invoicing period.

Online Suppliers Directory Price in EUROS

Basic entry under one product/service category: free of charge

Full entry including company contact details, entry under three categories, logo, short company description and a hyperlink to your homepage:

€270 / year

ach further product category: €30 / year

Translation (per entry): €35

Full entry logo format: 234w x 60h pixel

17

Page 18: globally published magazines for the coating and ... · 11.-13. Oktober Lucca, Italien Edipap Srl Paper Middle East 24.-26. Oktober Cairo International Convention Centre (CICC) Nile

2018 | C2 Coating & Converting www.c2-europe.eu

OPE journal

Circulation country breakdown OPE journal Readership structure OPE journal

Europe5795 copies

Asia 1805 copies

North America1900 copies

End user industries 21%

Machine manufacturers & engineers 13%

Material suppliers 18%

Research & Development 30%

Equipment suppliers 18%

OPE journal is the international trade magazine for the organic and printed electronics industry. The magazine is published in cooperation with the OE-A (Organic Electronics Association) and features official news, events and stories of the industry association. OPE journal is published with a circulation of 9500 copies as print or e-magazine. It is shipped personally to national and international decision makers and experts from the industry. Moreover, each issue contains detailed information on select technical core topics. On our website, we inform the industry daily about current events and news from the organic and printed electronics sector.

Frequency 4 issues per year

Journal format A 4

Volume 7th Edition (2018)

Subscription rates Annual subscription D (incl. VAT) €70.00Annual subscription EU €70.00(with valid VAT-ID number)RoW €75.00Individual sale price: €17.50Prices include postage and packing.All prices include VAT. Airmail on request.

18

PORTRAIT

Page 19: globally published magazines for the coating and ... · 11.-13. Oktober Lucca, Italien Edipap Srl Paper Middle East 24.-26. Oktober Cairo International Convention Centre (CICC) Nile

2018 | C2 Coating & Converting www.c2-europe.eu

EDITORIAL PROGRAM

IssueOPE journal

Issue 22

OPE journal

Issue 23

OPE journal

Issue 24

OPE journal

Issue 25

Advertising

deadlineFebruary 20, 2018 July 3, 2018 October 1, 2018 November 20, 2018

Editorial

deadlineFebruary 13, 2018 June 26, 2018 September 24, 2018 November 13, 2018

Publication

dateMarch 6, 2018 July 17, 2018 October 16, 2018 December 4, 2018

Trade fairs

LOPEC Vorschau

PE Europe peview

Touch Taiwan previewPE USA preview

Topic

Mobility Healthcare & Well-Being Flexible Displays Consumer Electronics &

Intelligent Clothing

Trade fairs

LOPEC, Munich

14.-15.03.2018Printed Electronics Europe, Berlin

11.-12.04.2018

Touch Taiwan, Taipeh

29.-31.08.2018Printed Electronics USA,

Santa Clara

(November) 2018FLEX Europe Conference,

Munich

13.-16.11.2018

19

In every issue we provide you with: analyses of the latest market trends • most recent industry news

• independently researched economic and business reports • reports on new technologies, methods and processes

Page 20: globally published magazines for the coating and ... · 11.-13. Oktober Lucca, Italien Edipap Srl Paper Middle East 24.-26. Oktober Cairo International Convention Centre (CICC) Nile

»Dem Stanzprozess die richtigeBalance geben«Seite 10

D3

07

7E ·

52

. JA

HR

GA

NG

STANZTECHNIK

› 20 Jahre Top Matrix

VERPACKUNGSDRUCK

› Die digitale Anwort aus einer Hand

PAPIER, KARTON, WELLPAPPE

› Innovationspotential im Service

03_2017

»Pouch Booster: Dieflexible Verpackung mitZukunft«Seite 10

D3

89

6 E ·

50

. JA

HR

GA

NG

PHARMA

› Kontaminationsrisiko ausschließen

KOSMETIC

› Viel Neues in München

INTERPACK 2017

› Neue Maschinen, neue Prozesse

LEBENSMITTEL

› Kleine Pixel, große Erwartung

06_2017

print

on line

OTHER TRADE JOURNALS IN SPECIALTY MARKETS

packMITTEL reports in each issue about solutions for the packaging material production with technical emphasis in punching technology, cutting and winding technology, the coating of materials, adhesive technology and packaging printing.

Have you already seen our media portal? At www.dfv-tfz.de, you can find all the information about our technical publications and events.

In each issue, packREPORT addresses the food and beverage, chemical, pharmaceutical, cosmetics and non-food sectors and provides information on the latest trends in packaging machine engineering, automation and logistics.

www.verpackungswirtschaft.de is the digital platform of the trade journals packMITTEL and packREPORT.