global mines introduction
TRANSCRIPT
AGENDA
• Brief Introduction• Why We Need PSIC?• What We Insure?• Our Presence Globally • Instruments Used For Inspection• Inspection Procedure• Inspection Report
BRIEF INTRODUCTION
• Founded in 2009• Head Office in UAE• Management having experience of more then 10 years in inspection• Having presence in New Zealand, Australia, South Korea, Japan, Thailand, Bangladesh, South Africa, Germany, Belgium, Netherland, Brazil, UK,
Canada & USA • Member of BIR• Member of MRAI since 2014• World-wide network of inspection agents• Presently inspecting more than 5000 containers per month
WHY WE NEED PSIC?
Pre-Shipment Inspection Or PSI• Part of supply chain management • Reliable quality control method• Various countries have regulations for mandatory pre-shipment inspection of recyclables (e.g. CHINA,INDIA,INDONESIA ETC.)• Scope of pre-shipment inspection to check the presence of toxic and hazardous waste• PSI is done to check the presence of radioactive elements in scraps as per DGFT guidelines and to visually/physically check the presence of Arms and Ammunitions
WHAT WE INSURE?
• Timely and Quality Inspection at site• Consignment is free of any Toxic And Hazardous Wastes • Consignment is free of Arms and Ammunition • Consignment should not exceed the Limit percentage of
Radioactivity• Health And Safety procedures are followed • Timely issuance of PSIC
OUR PRESENCE GLOBALY
INSTRUMENTS USED FOR INSPECTION
ATOMTEX DOSIMETER IDENTIFINDER
• Material Visual Inspection• Atmospheric and material radioactive readings.• Take Photo Of material Prior To Stuffing• Container survey during stuffing operations• Photos to be taken while inspection :
Container Empty With Serial No. Container 25% Full Container 50% full Container 100% full one door closed
Container full with sealInspector’s photo in front of container
• Inspection Report Preparation* If the material is contaminated with arms and ammunitions or
hazardous radiation more than permissible limit then we take precautionary steps as per guide lines
INSPECTION PROCEDURE
CONTACT US
GLOBAL MINES AND MINERALS FZE328, BUSINESS CENTER 06, AL MAREED BUILDINGRAS AL KHAIMAH FREE TRADE ZONE , UAEManmeet Kapoor : +91 9560366255EMAIL : [email protected] : www.globalminesandminerals.com