Global Environmental Energy Technologies PresentsGlobal Environmental Energy Technologies Presents

The Reactor The Reactor AssemblyAssembly

™

• The main components of the GEETThe main components of the GEET™ reactor assembly are the rod, the reactor assembly are the rod, the inlet chamber, and the outlet inlet chamber, and the outlet chamber. Each has a specific part chamber. Each has a specific part to play in the reaction process. to play in the reaction process.

• The assembly is typically made of The assembly is typically made of steel much like a standard exhaust steel much like a standard exhaust system on your engine.system on your engine.

First there will be the basic First there will be the basic reactor rod inside the reactor rod inside the

reactor.reactor.

Next will be the vapor inlet Next will be the vapor inlet piping. piping.

Finally the exhaust outlet Finally the exhaust outlet piping.piping.

The whole assembly is The whole assembly is complete.complete.

Please note the green Please note the green vapor inlet and red exhaust vapor inlet and red exhaust

arrows.arrows.

For understanding you can For understanding you can see the relationship of the see the relationship of the rod to the exhaust piping.rod to the exhaust piping.

A section view locates the A section view locates the rod exactly centered in the rod exactly centered in the

exhaust gas stream.exhaust gas stream.

There must be counterflow There must be counterflow of incoming vapors and of incoming vapors and

outgoing exhaust for heat outgoing exhaust for heat exchange.exchange.

Drawings and presentation Drawings and presentation by:by:

Clarence H. Close, Jr. Clarence H. Close, Jr. ©©

12789 N. Rio Vista Rd.12789 N. Rio Vista Rd.

Pocatello, Idaho, U.S.A. 83202Pocatello, Idaho, U.S.A. 83202

(208) 238-0493(208) 238-0493

E-mail clarenceclose@dcdi.netE-mail clarenceclose@dcdi.net