global edm machines, consumables service / training

Global EDM, 7697 Innovation Way, Mason, Ohio 45040 USAhttp://globalsmsas.com

1

http://globalsmsas.com


2

GLOBAL EDM Machines

Application solutions for your specific electric discharge machining requirements, across all industries e.g. Aerospace, Medical, Power Generation, Die / Mold, General Machining:

- Wire Cut EDM machines

- Fast Hole Drilling EDM machines

- Die Sinker EDM machines

- Manual & CNC EDM Drilling machines

Consumables: 800.290.7573Machines: [email protected]


http://www.globalsmsas.com/PRODUCTS/EXCETEKEDM/WIRE/WGSERIES/W350G.aspx

http://www.globalsmsas.com/PRODUCTS/BEAUMONTMACHINE/BeaumontEDMMachines.aspx

http://www.globalsmsas.com/PRODUCTS/EXCETEKEDM/DIESINKERS/ED400C.aspx

http://www.globalsmsas.com/PRODUCTS/OCEANEDMDRILLS.aspx

mailto:[email protected]?subject=


3

Global EDM also supplies over 3,000 different EDM Parts & Consumables …….including Wire, Filters, Wear Parts, Resin, Fluids and Lubricants and Electrodes

……from all the top OEM suppliers and manufacturers.

GLOBAL EDM Consumables / Supplies



mailto:[email protected]


4

…..is designed to use the EDM process to excite Piezo responsive elements incorporated into the surface microstructure of the wire thereby enhancing the flushing process which is the key component to the efficiency of Wire EDM.

….is a double coated (epsilon brass plus gamma brass phases) brass EDM wire designed to take advantage of the high metal removal rate of a gamma coating during rough cuts and the superior surface finish produced by high zinc content coatings during skim passes.

NEW EDM WIRES from Global Innovative Products.

…improves metal removal rates, using hybrid coated EDM wire. The PLASMA economy grade brass is coated with a hybrid brass coating using a highly efficient coating process. The resultant wire generates significantly enhanced metal removal rates compared to premium brass products.



5

EXCETEK EDM offers a complete line of Wire, Die Sinkers, and Speciality Machines.

Global EDM is the exclusive importer in North America for EXCETEK Technologies’

(Taichung, Taiwan) complete line of EDM equipment.



6

Wire EDM DIE SINKERS

SPECIALITY MACHINES



7

WG/WP/WX Series Superb Design & Construction Rigid, heavily ribbed high-grade Meehanite castings. Reinforced water-cooled lower arm is made of high-strength alloy for maximum stiffness.

Premium Grade Components Ultra-precise direct-couple drive system - no belts. Fine pitch, ultra fine-finish ball screws and high resolution servo motors with 4 millionths resolution. Glass -scales.

Leading Edge Electronics Electrolysis-free machining. Digital Power Manager Technology. Superb accuracies and finishes up to RA 0.3um

WIRE EDM



8

Windows Based XP Control Feature-packed control is easy-to-use, versatile and has a large 15” easy-to-read, full color touch screen display.

Intelligent Servo Controlled Wire Threading Technology

Saves time, easy to use - threads at wire break point. No need to return to start point. Under 10 second spark-to-spark time with total reliabilitly.



9

NEW EXCETEK WG Plus EDM Wire

Machine Specifications



10

Wire Cut EDM WG Series

W350G W850G

Model Travels Max work-piece

W350G X13.8”xY9.8”xZ8.7” 27.6”x19.7”

W500G X19.7xY11.8”xZ12.2 33.5”x23.6”

W650G X25.6xY15.7”xZ16.1 43.3”x33.5”

W850G X31.5xY19.7”xZ16.1 43.3”x33.5”



11

WP Series Double Column Gantry

Travels: WP500 X 19.7 x Y 11.8 x Z 10.2

Maximum work-piece size: X 33.5 x Y23.6 x Z10.0

NO SEAL PLATE EXCLUSIVE TECHNOLOGY!



12

Travels: Max work-piece WX1060 X39.4” x Y23.6” x Z19.7” 59”X 40” WX1280 X47.2” x Y31.5” x Z31.5” 65”X 48” WX12100 X47.2” x Y39.4” x Z39.6” 65”X 55”

WX Series Fixed Bed



13

CNC DIE SINKERS

Travels: X15.8 “x Y11.8” Z13.8” Travels: X86.6“x Y39.4” Z23.6”

ED 400C ED 2200C



14

FH35ZA Axis Travel

X 13.8” Y 9.8” Z 13.8” W 7.8”

Table Size 24” x 12”

FH45ZA Axis Travel

X 17.7” Y 13.8” Z 13.8” W 7.8”

Table Size 24” x 12”

EDM Drills



15

FH600SCNC Axis travels

X23.6” Y15.8” Z15.8” W17.8

Work table 23.6”x18.8”

FH8060CNC Axis travels

X31.5” Y23.6” Z19.7” W19.7

Work table 31.5”x23.6

EDM Drills



16

Beaumont has designed, engineered,customized and manufactured EDM machines in USA for over 25 years.

Fast Hole EDM specifically built for the Aerospace and Industrial Gas Turbine industry.

• On / Off time of 999 micro seconds each way

• 65 AMPs current supply • Spindle rotation of 2,000 RPM • Water pressure 2,000psi at 18 to 20 µS. • Fanuc controls



17

Standard features:

• Fanuc31-B5 controls • 15” LCD Color Screen • Fanuc drives • Operator’s remote pendant • EBBCO Dielectric systems • Medium & High Pressure Flush • 2000 RPM Spindle • B Axis with Heidenhain Glass Scale (Tilting Head) +/- 120 degrees

• Granite table with SS inserts



18

Robotic Tool Changer

• 24 station tool changer • Fanuc LR Mate Robot • Change up to 18 electrodes

and 6 guides • Uses standard Fanuc tool

managment software • Image selection requires full

enclosure and riser



19

FH Series Options

Accuracy• C Axis Heidenhain scales • Work Piece positioning probe • Laser compensation measurement

Water Filtration• Dielectric Water filtration system

Programming• Unigraphics post processor



20

Summary : Global EDM Corporate Strengths

• Historic Background : KERN EDM • Large Customer Base • Established Consumables Brands: Maxis, Axiom, Gamma, Optima, Blaze, Epsilon, Plasma • Exclusive : Sumitomo • Diversified Vendors: Thermo, Stamm, PAPS, FECO, Hitachi, SWIL, Powerway • POCO Graphite & Machining • Bases: Regional and International • Testing and Quality: ITP/ Roger Kern • Research & Development: Metallurgy & Manufacturing • Application Support: Brad Hansford , Ed Beaumont, and Roger Kern • Strategic Investment: Potential Acquisitions England , Germany and England



21

Visit us at Booth # E-5033



mailto:[email protected]?subject=

global edm machines, consumables service / training

Engineering