gle - mercedes-benz usa · 2020-03-26 · gle plug-inhybridsupplement orderno.p166019513...

GLEPLUG-IN HYBRID Supplement

Order no. P166 0195 13 Part no. 166 584 73 05 Edition A 2017

É1665847305yËÍ1665847305

Publication detailsInternet

Further information about Mercedes-Benz vehi-cles and about Daimler AG can be found on thefollowing websites:http://www.mbusa.com (USA only)http://www.mercedes-benz.ca (Canada only)

Editorial office

You are welcome to forward any queries or sug-gestions youmay have regarding this Operator'sManual to the technical documentation team atthe following address:Customer Assistance CenterMercedes-Benz USA, LLC3 Mercedes DriveMontvale, NJ 07645-0350©Daimler AG: not to be reprinted, translated orotherwise reproduced, in whole or in part, with-out written permission from Daimler AG.

Vehicle manufacturer

Daimler AGMercedesstraße 13770327 StuttgartGermany

SymbolsRegistered trademarks:RBluetooth® is a registered trademark of Blue-tooth SIG Inc.RDTS™ is a registered trademark of DTS, Inc.RDolby® and MLP™ are registered trademarksof DOLBY Laboratories.RBabySmart™, ESP® and PRE-SAFE® are reg-istered trademarks of Daimler AG.RHomeLink® is a registered trademark of John-son Controls.RiPod® and iTunes® are registered trademarksof Apple Inc.RLogic7® is a registered trademark of HarmanInternational Industries.RMicrosoft® and Windows media® are regis-tered trademarks of Microsoft Corporation.RSIRIUS® is a registered trademark of SiriusXM Radio Inc.RHD Radio™ is a registered trademark of iBiq-uity Digital Corporation.RGracenote® is a registered trademark ofGracenote, Inc.RZAGAT Survey® and related brands are regis-tered trademarks of Zagat Survey, LLC.

In this Operator's Manual you will find the fol-lowing symbols:

G WARNINGWarning notes make you aware of dangerswhich could pose a threat to your health orlife, or to the health and life of others.

H Environmental noteEnvironmental notes provide you with infor-mation on environmentally aware actions ordisposal.

! Notes on material damage alert you to dan-gers that could lead to damage to your vehi-cle.

i Practical tips or further information thatcould be helpful to you.

X This symbol indicates an instructionthat must be followed.

X Several of these symbols in successionindicate an instruction with severalsteps.

(Ypage)

This symbol tells youwhere you can findmore information about a topic.

YY This symbol indicates a warning or aninstruction that is continued on the nextpage.

Dis‐play This text indicates a message on themultifunction display/multimedia dis-play.

As at 06.11.2015

Welcome to the world of Mercedes-BenzWe urge you to read this Operator's Manualcarefully and familiarize yourself with the vehi-cle before driving. For your own safety and alonger vehicle life, follow the instructions andwarning notices in this Operator's Manual.Ignoring them could result in damage to thevehicle or personal injury to you or others.Vehicle damage caused by failure to followinstructions is not covered by the Mercedes-Benz Limited Warranty.The equipment or product designation of yourvehicle may vary depending on:RModelROrderRCountry specificationRAvailabilityMercedes-Benz therefore reserves the right tointroduce changes in the following areas:RDesignREquipmentRTechnical featuresThe equipment in your vehicle may thereforediffer from that shown in the descriptions andillustrations.The following are integral components of thevehicle:RDigital Operator's ManualRPrinted Operator's ManualRMaintenance BookletREquipment-dependent supplementsKeep these documents in the vehicle at alltimes. If you sell the vehicle, always pass alldocuments on to the new owner.Your Operator's Manual:

Digital form inside the vehicleThe Digital Operator's Manual providescomprehensive and specifically adaptedinformation on your vehicle's equipmentand multimedia system. It contains infor-mative animations, individual languagesettings and an intuitive search function.Booklet inside the vehicleIn addition to this manual and the afore-mentioned digital media, you also have theoption to obtain a comprehensive printedversion of the Supplement for your multi-media system from your authorizedMercedes-Benz Center.

Digital form via the InternetTheOperator'sManual on the Internet pro-vides easy access to all informationregarding your vehicle andmultimedia sys-tem. It also provides helpful animations,interesting background information and awide array of search options.Digital form as an AppUsing the Mercedes-Benz Guides App, youcan view all the information on your vehicleandmultimedia system via mobile Internetor download it independently of networkaccess. Available for smartphones or tab-lets.

You can also use the Mercedes-Benz GuidesApp:

Please note that theMercedes-Benz Guides Appmay not yet be available in your country.Mercedes-Benz USA, LLCMercedes-Benz Canada, Inc.A Daimler Company

1665847305 É1665847305yËÍ

Index ....................................................... 3

Introduction ........................................... 7Protecting the environment ..................... 7Operator's Manual ................................... 7Operating safety ...................................... 7

At a glance ............................................. 8Hybrid drive system ................................. 8Instrument cluster ................................... 9

Safety ................................................... 10Hybrid drive system ............................... 10Occupant safety .................................... 12

Climate control .................................... 13Overview of climate control systems ..... 13Operating the climate control sys-tems ...................................................... 17

Driving and parking ............................ 20Driving ................................................... 20Driving tips ............................................ 26Refueling ............................................... 27Charging the high-voltage battery .......... 29Parking .................................................. 37

On-board computer and displays ...... 38Important safety notes .......................... 38Displays and operation .......................... 38Menus and submenus ............................ 39Display messages .................................. 45Warning and indicator lamps in theinstrument cluster ................................. 48

Multimedia system ............................. 50Important safety notes .......................... 50Vehicle menu ......................................... 50

Maintenance and care ........................ 51Engine compartment ............................. 51

Breakdown assistance ....................... 52Battery (vehicle) ..................................... 52Jump-starting ......................................... 53Towing ................................................... 53

Technical data ..................................... 54Filling capacities .................................... 54Vehicle data ........................................... 54

2 Contents

AAccident

Automaticmeasures after an acci-dent ................................................. 10

Activating/deactivating coolingwith air dehumidification ................... 17Air-conditioning system

see Climate controlAuthorized Mercedes-Benz Center

see Qualified specialist workshop

BBattery (high-voltage)

see High-voltage batteryBattery (vehicle)

Display message .............................. 47Important safety notes .................... 52Jump starting ................................... 53

Brake pedalPedal resistance/pedal travel .......... 11

BrakesRBS warning lamp ............................ 49Recuperative Brake System ............. 11Warning lamp ................................... 48

Breakdownsee Towing away

CCharging

see Charging the high-voltage bat-tery (important safety notes)

Charging cableConnecting ...................................... 33Controls ........................................... 32Important safety notes .................... 31Indicator lamp .................................. 33Removing ......................................... 34Storing ............................................. 31Warming up ..................................... 31

Charging the high-voltage battery(important safety notes) ..................... 29Climate control

Automatic climate control (3-zone) ................................................ 15Cooling with air dehumidification ..... 17

Dual-zone automatic climate con-trol ................................................... 13General notes .................................. 13Immediate pre-entry climate con-trol ................................................... 19Overview of systems ........................ 13Pre-entry climate control atdeparture time ................................. 18Pre-entry climate control via key ..... 17Rear control panel ........................... 15Refrigerant filling capacity ............... 54Switching residual heat on/off ........ 17

COMANDMenu overview ................................. 50

Consumption statistics (on-boardcomputer) ............................................ 43Coolant (engine)

Checking the level ........................... 51Displaying the temperature (on-board computer) .............................. 43Filling capacity ................................. 54Temperature gauge .......................... 39

Coolingsee Climate control

DData

see Technical dataDisplay

Condition of charge ......................... 40see Display messages

Display messageHybrid drive system ......................... 45

Display messagesEngine .............................................. 47Vehicle ............................................. 48

Driving safety systemsRecuperative Brake System ............. 11

DYNAMIC SELECT controllerPLUG-IN HYBRID operation .............. 22

EECO start/stop function

PLUG-IN HYBRID operation .............. 23Emergency

Automaticmeasures after an acci-dent ................................................. 10

Index 3

EngineDisplay message .............................. 47Jump-starting ................................... 53

Engine oilFilling capacity ................................. 54

Exhaustive discharging (high-volt-age battery) ......................................... 52

FFiller cap

see RefuelingFuel

Consumption statistics .................... 43Displaying the current consump-tion .................................................. 42Displaying the range ........................ 42Tank content/reserve fuel ............... 54

Fuel filler flapOpening (PLUG-IN HYBRID vehi-cles) ................................................. 27

Fuel levelCalling up the range (on-boardcomputer) ........................................ 42

Fuel tankCapacity ........................................... 54Problem (malfunction) ..................... 28

HHeating

see Climate controlHigh-voltage battery

Battery care ..................................... 30Charging .......................................... 52Charging (charging station) .............. 35Charging (mains socket) .................. 31Charging (wallbox) ........................... 34Charging cable warming .................. 31Condition of charge display(COMAND) ....................................... 50Cruise range .................................... 30Energy consumption ........................ 30General notes .................................. 11Method of operation ........................ 30Outside temperatures ...................... 30Overvoltage protection .................... 31Problems with the charging proc-ess ................................................... 35

Terms of use .................................... 30Vehicle fire ....................................... 11

Hybrid drive systemAutomatic switch off ........................ 10Danger of electric shock .................. 10Display message .............................. 45General notes .................................. 10High-voltage battery ........................ 11Important safety notes .................... 10Manual switch off ............................ 10Opening the hood ............................ 11Warning lamp ................................... 49

HYBRID operationCondition of charge of high-volt-age battery ...................................... 50Energy flow display .......................... 50High-voltage battery (condition ofcharge) ............................................ 50

Hybrid vehiclesImportant safety notes .................... 10

IInstrument cluster

Overview ............................................ 9

JJump starting (engine) ........................ 53

MMalfunction message

see Display messagesMaximum charge current

Setting (charging cable) ................... 32Setting (on-board computer) ............ 43

Messagessee Display messages

Multifunction displayFunction/notes ................................ 39Permanent display ........................... 44

OOccupant safety

Automaticmeasures after an acci-dent ................................................. 10Restraint system warning lamp ........ 12

4 Index

On-board computerDisplay messages ............................ 45HYBRID menu .................................. 43Important safety notes .................... 38Instrument cluster menu .................. 44Menu overview ................................. 39Settings menu .................................. 43Trip menu ......................................... 40

Online access to the vehicleData protection ................................ 37Functions ......................................... 37General information ......................... 36Internet ............................................ 37

Operating safety .................................... 7Operator's Manual

Vehicle equipment ............................. 7

PPLUG-IN HYBRID operating

Electrical energy generated ............. 50PLUG-IN HYBRID operation

Automatic engine start (ECOstart/stop function) ......................... 23Automatic engine switch-off (ECOstart/stop function) ......................... 23Charge level of the high-voltagebattery ............................................. 40Charging the high-voltage battery .... 40Displaying the total range andelectric range ................................... 43Driving tips ...................................... 26DYNAMIC SELECT controller ............ 22ECO start/stop function .................. 23Electric motor (power display) ......... 38Energy flow display .......................... 40Fuel consumption ............................ 50Fuel consumption (COMAND) .......... 50General notes .................................. 20High-voltage battery (condition ofcharge) ............................................ 40Hybrid drive system overview ............ 8HYBRID menu .................................. 43Important safety notes .................... 20Instrument cluster (power dis-play) ................................................. 38Noiseless start ................................. 22Operating (on-board computer) ....... 38

Operating mode ............................... 21Overrun mode .................................. 24Parking ............................................ 37Power display (electric motor) ......... 38Problems ......................................... 25Problems with SRS (supplementalrestraint system) .............................. 26Problems with the combustionengine .............................................. 25Problems with the hybrid drivesystem ............................................. 26Problems with the RecuperativeBrake System ................................... 25Pulling away ..................................... 22READY display ................................. 22Recuperative Brake System ............. 20Route-based operating strategy ....... 24Shifting manually ............................. 23Starting ............................................ 22When the vehicle is stationary ......... 26

Pre-entry climate control (viaSmartKey)

Problems (malfunctions) .................. 18Pre-entry climate control at time ofdeparture

General notes .................................. 18Setting departure time ..................... 19

Pre-entry climate control viaSmartKey

General notes .................................. 17Protection of the environment ............. 7

QQR code

Mercedes-Benz Guide App ................. 1Qualified specialist workshop .............. 7

RRBS (Recuperative Brake System)

Warning lamp ................................... 49Recuperative Brake System

Driving safety systems ..................... 11Important safety notes .................... 11

RefuelingRefueling process ............................ 27Refueling process (PLUG-INHYBRID vehicles) ............................. 27

Index 5

Reserve (fuel tank)see Fuel

Residual heat (climate control) .......... 17Restraint system

Warning lamp (function) ................... 12Roof load (maximum) .......................... 54

SSafety

Hybrid drive system ......................... 10Safety notes

Hybrid vehicles ................................ 10Setting the charge current (on-board computer) .................................. 43Setting the departure time (on-board computer) .................................. 44Specialist workshop .............................. 7Supplement ............................................ 7

TTechnical data

Vehicle data ..................................... 54Temperature

Coolant ............................................ 39Coolant (on-board computer) ........... 43

Towing a trailerMounting dimensions ...................... 55

Towing awayImportant safety guidelines ............. 53

Trip computer (on-board com-puter) .................................................... 43

VVehicle

Display message .............................. 48Equipment .......................................... 7Parking for a long period .................. 52Towing away .................................... 53Vehicle data ..................................... 54

Vehicle dimensions ............................. 54

WWarning

Stickers ........................................... 10

Warning and indicator lampsBrakes ............................................. 48Hybrid drive system ......................... 49RBS (Recuperative Brake Sys-tem) ................................................. 49

6 Index

Protecting the environment

H Environmental noteHave a defective high-voltage battery dis-posed of in an environmentally-responsiblemanner. Contact a qualified specialist work-shop which has the necessary specialistknowledge and tools to carry out the workrequired. Mercedes-Benz recommends thatyou use an authorized Mercedes-Benz Centerfor this purpose.

Operator's Manual

Vehicle equipmentThis Supplement provides information on all theimportant functions of your hybrid vehicle thatare either not described or differ from thedescriptions in the vehicle's Operator's Manual.The information supplements or substitutes thecorresponding sections in the vehicle's Opera-tor's Manual. Under no circumstances does thesupplement replace the Operator's Manual.This Supplement describes all models, andstandard and optional equipment for your sys-tem, as available at the time of going to print.Country-specific differences are possible. Bearin mind that your vehicle may not feature allfunctions described here. This also applies tosafety-relevant systems and functions. Theequipment in your vehicle may therefore differfrom that shown in the descriptions and illus-trations.The original purchase contract documentationfor your vehicle contains a list of all the systemsin your vehicle.Should you have any questions concerningequipment and operation, please consult anauthorized Mercedes-Benz Center.The Operator's Manual and Maintenance Book-let are important documents and should be keptin the vehicle.

Operating safety

Important safety notesHybrid vehicles have a combustion engine andan electric motor. The voltage supply for oper-

ating the vehicle electrically is provided by thevehicle's high-voltage electrical system on thehybrid drive system.

G DANGERThe vehicle's high-voltage electrical system isunder high voltage. If you modify componentsin the vehicle's high-voltage electrical systemor touch damaged components, you may beelectrocuted. The components in the vehi-cle's high-voltage electrical system may bedamaged in an accident, although the damageis not visible. There is a risk of fatal injury.Following an accident, do not touch any high-voltage components and never modify thevehicle's high-voltage electrical system. Havethe vehicle towed away after an accident andthe vehicle's high-voltage electrical systemchecked by a qualified specialist workshop.

All components of the hybrid drive system aremarked with yellow warning stickers that warnyou of the danger of high voltage. The cables ofthe vehicle's high-voltage electrical system areorange in color.Always have all work on the hybrid drive systemcarried out at a qualified specialist workshop.An authorized Mercedes-Benz Center is a quali-fied specialist workshop.Vehicles with an electric motor generate muchless driving noise than vehicles with internalcombustion engines. As a result, your vehiclemay not be heard by other road users in certainsituations. This can happen, for example, whenyou are parking and your vehicle is not seen byother road users. This requires you to adopt aparticularly anticipatory driving style, as it isnecessary to allow for the possibility that otherroad users may behave erratically.

Introduction 7

Z

Hybrid drive system

: Battery charger and voltage converter; Vehicle socket= Power electronics? 12 V batteryA High-voltage electrical system cablesB Transmission with electric motorC High-voltage batteryD Electric heaterE Recuperative Brake SystemF Electric refrigerant compressorYou can switch off the hybrid drive system manually. For further information on the high-voltageswitch-off device, see (Y page 10).

8 Hybrid drive systemAt

aglance

Instrument cluster

: Electrical range; Recuperative Brake System warning lamp (Y page 49)= Electric motor performance display (Y page 38)? Driving mode display (Y page 21)

Instrument cluster 9

Ataglance

Hybrid drive system

General notesHybrid technology combines a fuel efficientinternal combustion engine with a powerfulelectric motor.

Important safety notes

Danger of electric shock


When towing a vehicle after an accident, be sureto observe the following sections in the vehicleOperator's Manual:RTransporting the vehicleRTowing the vehicle with the rear axle raisedRTowing a vehicle with both axles on theground

Read the safety instructions on towing and tow-starting (Y page 53).

All components of the hybrid drive system aremarked with yellow warning stickers that warnyou of the danger of high voltage. The cables ofthe vehicle's high-voltage electrical system areorange in color.The ignition must be switched off when carryingout general tasks, such as changing bulbs orchecking the coolant level.

Automatic switching off of the hybriddrive systemIf components of the restraint system are acti-vated during an accident, the hybrid drive sys-tem is automatically deactivated.The hybrid drive system is not activated whenthe vehicle is started if:Ran electrical short circuit is detected in thehybrid drive systemRan electrical connection in the hybrid drivesystem is disconnected

This ensures that you do not come into contactwith high voltage.

Manual switching off of the hybrid drivesystemThe hybrid drive system can be deactivatedmanually using the high voltage switch-offdevice.

! To prevent damage to the hybrid drive sys-tem please observe the following instruc-tions:Ronly deactivate the hybrid drive systemmanually in the following situations.Rwork on the hybrid drive system may onlybe carried out at a qualified specialist work-shop, even when it has been deactivatedmanually.

Deactivate the hybrid system manually if:Rthe6 restraint systemwarning lamp in theinstrument cluster lights up after an accidentRthe vehicle is badly damaged, e.g. after anaccident, and the restraint system compo-nents were not activatedRthe vehicle is badly damaged and has to betowed or transported

10 Hybrid drive systemSafety

X If possible, move the vehicle out of thedanger zone: shift the automatic transmis-sion into position N.

X Release the electric parking brake.X Roll the vehicle to a safe place and park itsafely.Get assistance from others if necessary.

The vehicle is locked automatically when theignition is switched on and the wheels are turn-ing. There is therefore a risk of being locked outif the vehicle is being pushed or tested on adynamometer.X Switch the ignition off.X Shift the automatic transmission to park posi-tion P.Apply the electric parking brake.Safeguard the vehicle against rolling away(see the vehicle Operator's Manual).

X To use the high-voltage switch-off device:open the tailgate.

X Lift the cargo compartment floor upwards(see the vehicle Operator's Manual).

X Pull off the right-hand paneling in the cargocompartment.

X Press release clip: in the direction of thearrow and pull it out.

X Pull high-voltage switch-off device; apartuntil it engages.

If the hybrid drive system has been deactivateddue to reasons mentioned above, have itchecked at a qualified specialist workshopbefore reactivation.

High-voltage battery

G WARNINGIn the event of a vehicle fire, the internal pres-sure of the high-voltage battery can exceed a

critical value. In this case flammable gasescapes through a ventilation valve on theunderbody. The gas can ignite. There is a riskof injury.Leave the danger zone immediately. Securethe danger area at a suitable distance, whilstobserving legal requirements.

G WARNINGIf the housing of the high-voltage battery hasbeen damaged, electrolyte and gases mayleak out. These are poisonous and caustic.There is a risk of injury.Avoid contact with skin, eyes or clothing.Immediately rinse electrolyte splashes offwith water and seek medical attentionstraight away.

! Exhaustive discharge caused by the vehiclestanding idle for lengthy periods can damagethe high-voltage battery. If the vehicle is idlefor lengthy periods leave the high-voltage bat-tery connected to a charging station.

Charging the high-voltage battery (Y page 29).

Engine compartmentBefore opening the hood:X Apply the electric parking brake.X Shift the transmission to position P.X Switch the ignition off.X Observe the warning notes on the risk of elec-tric shock (Y page 10).

X Observe the warning notes on the hood (seethe vehicle Operator's Manual).

RBS driving safety system (Recupera-tive Brake System)The Recuperative Brake System supports youwhen braking with an electronically-controlledbrake boost mode and enables the recovery ofkinetic energy (recuperation).Further information about the RecuperativeBraking System (Y page 20).

Hybrid drive system 11

Safety

Z

Occupant safety

Restraint system warning lampIf the restraint system is disrupted, the high-voltage on-board electrical system may not beswitched off in the event of an accident as inten-ded.

G DANGERIf the restraint system is malfunctioning,restraint system components may be trig-gered unintentionally or may not deploy asintended during an accident. This can affectfor example the Emergency TensioningDevice or the air bag. Furthermore, in theevent of an accident, the vehicle's high-volt-age electrical system may not be deactivatedas intended. You may be electrocuted if youtouch the damaged components of the vehi-cle's high-voltage electrical system. Thisposes an increased risk of injury or even fatalinjury.Have the restraint system checked andrepaired in a qualified specialist workshop assoon as possible. After an accident, switch offthe ignition immediately and remove the keyfrom the ignition lock.

Amalfunction has occurred if the 6 restraintsystem warning lamp:Rdoes not light up after the ignition is switchedonRdoes not go out after a few seconds while thecombustion engine or hybrid system is run-ningRlights up again while the combustion engineor hybrid system is running

12 Occupant safetySafety

Overview of climate control systems

General notesObserve the notes and the recommended settings in the vehicle Operator's Manual. The windowscould otherwise fog up.Climate control regulates the temperature and air humidity in the vehicle interior. Due to the elec-trical refrigerant compressor, the "Cooling with dehumidification" function is also operational with-out the combustion engine running. Optimumclimate control is only achievedwith the sidewindowsand roof closed.The residual heat function can only be activated or deactivated with the ignition switched off(Y page 17).The "Pre-entry climate control" function is available. Use this function to briefly preheat or ventilatethe driver's seat area or the entire vehicle interior before entering the vehicle. The air from the airvents can also be pre-cooled.

Control panel for dual-zone automatic climate control

USA onlyFront control panel

: Sets the temperature, left; Defrosts the windshield= Switches the maximum cooling MAX COOL on or off? Switches cooling with air dehumidification on/off (Y page 17)A Switches the rear window defroster on/offB Sets the temperature, rightC Switches air-recirculation mode on/offD Sets the air distributionE Increases the airflowF Reduces the airflowG Activates/deactivates climate controlH Sets climate control to automatic

Overview of climate control systems 13

Climatecontrol

Canada onlyFront control panel

: Sets the temperature, left; Defrosts the windshield= Switches the ZONE function on/off? Switches cooling with air dehumidification on/off (Y page 17)

Switches the residual heat on or off (Y page 17)A Switches the rear window defroster on/offB Sets the temperature, rightC Switches air-recirculation mode on/offD Sets the air distributionE Increases the airflowF Reduces the airflowG Activates/deactivates climate controlH Sets climate control to automaticIn the vehicle Operator's Manual, information and recommendations can be found on:Rusing automatic climate controlRusing the rear control panelRthe individual functionsObserve these notes for optimal use of the automatic climate control.The "Cooling with air dehumidification" function is even available when the engine is not running(Y page 17).Use the residual heat function if you want to heat or ventilate the vehicle interior when the ignitionis switched off. The residual heat function can only be activated or deactivated with the ignitionswitched off. When the ignition is switched on, the residual heat function is switched off(Y page 17).

14 Overview of climate control systemsClimatecontrol

Control panel for 3-zone automatic climate control

USA onlyFront control panel

: Sets the temperature, left; Defrosts the windshield= Switches the maximum cooling MAX COOL on or off? Switches cooling with air dehumidification on/off (Y page 17)A Switches the rear window defroster on/offB Sets the temperature, rightC Switches the ZONE function on/offD Activates/deactivates climate controlE Sets the air distributionF Increases the airflowG Reduces the airflowH DisplayI Adjusts the climate mode settingsJ Switches air-recirculation mode on/offK Sets climate control to automatic

Rear control panelL Increases the airflowM Sets the temperatureN Sets rear-compartment climate control to automaticO Directs the airflow through the rear air ventsP Switches the seat heating on the right-hand side on/offQ Directs the airflow through the footwell ventsR Switches the rear climate control on/offS Reduces the airflowT Switches the seat heating on the left-hand side on/off

Overview of climate control systems 15

Climatecontrol

Canada onlyFront control panel

: Sets the temperature, left; Defrosts the windshield= Switches the residual heat on or off (Y page 17)? Switches cooling with air dehumidification on/off (Y page 17)A Switches the rear window defroster on/offB Sets the temperature, rightC Switches the ZONE function on/offD Activates/deactivates climate controlE Sets the air distributionF Increases the airflowG Reduces the airflowH DisplayI Adjusts the climate mode settingsJ Switches air-recirculation mode on/offK Sets climate control to automatic

Rear control panelL Increases the airflowM Sets the temperatureN Sets rear-compartment climate control to automaticO Directs the airflow through the rear air ventsP Switches the seat heating on the right-hand side on/offQ Directs the airflow through the footwell ventsR Switches the rear climate control on/offS Reduces the airflowT Switches the seat heating on the left-hand side on/off

16 Overview of climate control systemsClimatecontrol

In the vehicle Operator's Manual, information and recommendations can be found on:Rusing automatic climate controlRusing the rear control panelRthe individual functionsObserve these notes for optimal use of the automatic climate control.The "Cooling with air dehumidification" function is even available when the engine is not running(Y page 17).Use the residual heat function if you want to heat or ventilate the vehicle interior when the ignitionis switched off. The residual heat function can only be activated or deactivated with the ignitionswitched off. When the ignition is switched on, the residual heat function is switched off(Y page 17).

Operating the climate control sys-tems

Switching cooling with air dehumidi-fication on/offIf you deactivate the "Cooling with air-dehumid-ification" function, the air inside the vehicle willnot be cooled. The air inside the vehicle will alsonot be dehumidified. The windows can fog upmore quickly. Therefore, deactivate the coolingwith air-dehumidification function only briefly.The "Cooling with air dehumidification" functionis available even when the engine is not running.The air inside the vehicle is cooled and dehu-midified according to the temperature selected.Condensation may drip from the underside ofthe vehicle when it is in cooling mode. This isnormal and not a sign that there is a malfunc-tion.X To activate: press the¿ orÁ button.The indicator lamp in the¿ orÁ buttonlights up.

X To deactivate: press the¿ orÁ but-ton.The indicator lamp in the¿ orÁ buttongoes out. The "Cooling with air dehumidifica-tion" function has a delayed switch-off fea-ture.

Switching the residual heat on or offIt is possible to make use of the residual heat ofthe engine to continue heating the stationaryvehicle for up to 30 minutesafter the engine hasbeen switched off. The heating time depends onthe set interior temperature.

X To activate: press theÌ orÁ button.The indicator lamp in theÌ orÁ buttonlights up.

X To deactivate: press theÌ orÁ but-ton.The indicator lamp in theÌ orÁ buttongoes out.

The blower will run at a low speed regardless ofthe airflow setting.If you activate the residual heat function at hightemperatures, only the ventilation will be acti-vated. The blower runs at medium speed.Residual heat is deactivated automatically:Rafter approximately 30 minutesRwhen the ignition is switched onRif the battery voltage drops

Pre-entry climate control via Smart-Key

General notesBefore getting in, the vehicle interior can bebriefly warmed or ventilated in advance and theair from the air vents can be pre-cooled.The high-voltage battery must be sufficientlycharged before "Pre-entry climate control viaSmartKey" can be activated.When the vehicle is pre-cooled, the followingfunctions are activated if required:RClimate control systemRBlowerRSeat ventilation

Operating the climate control systems 17

Climatecontrol

When the vehicle is pre-heated, the followingfunctions are activated if required:RClimate control systemRBlowerRSeat heatingIf you have activated ionization via the multime-dia system, it is activated together with pre-entry climate control.

Activating/deactivatingBefore "Pre-entry climate control via SmartKey"can be activated, you must activate the functionusing the on-board computer.

X To activate: unlock the vehicle with theSmartKey or KEYLESS-GO.The climate control functions are activatedfor up to 5 minutes for pre-heating and pre-cooling.

X To deactivate: "Pre-entry climate control viaSmartKey" deactivates automatically whenthe engine is started.

The following functions remain active after theengine is started:RSeat heating (heating)RSeat ventilation (ventilation)RIonization

Problems with "Pre-entry climate control via SmartKey"

Problem Possible causes/consequences andM Solutions

"Pre-entry climate con-trol via SmartKey" can-not be switched on orhas switched itself off.

The condition of charge of the high-voltage battery is under the speci-fied minimum condition of charge.X Start the engine when the vehicle is at a standstill.The engine powers the electric motor. The electric motor operatesas a generator. The high-voltage battery is being charged.

Further information on charging the high-voltage battery via:Ra mains socket (Y page 31)Ra charging station (Y page 35)Ra wallbox (Y page 34)

"Pre-entry climate control via SmartKey" has been started more thantwice with the engine switched off.X Switch on the engine and let it run for more than ten seconds.X Try again to switch on "Pre-entry climate control via SmartKey".

Pre-entry climate control at time ofdeparture


G WARNINGIf persons, particularly children are subjectedto prolonged exposure to extreme heat orcold, there is a risk of injury, possibly evenfatal. Never leave children unattended in thevehicle.

General notesYou can use the "Pre-entry climate control atdeparture time" function to cool or heat thevehicle interior if the engine is not running.The "Pre-entry climate control at departuretime" function can be activated regardless ofwhether or not the vehicle is connected to anelectric power supply. The condition of charge ofthe high-voltage batterymust be higher than thespecified minimum condition of charge, how-ever.When the vehicle is connected to an electricpower supply, priority is given to charging thehigh-voltage battery to the specified minimumcharge. "Pre-entry climate control at departuretime" is only activated subsequently.

18 Operating the climate control systemsClimatecontrol

The running time of the "Pre-entry climate con-trol at departure time" function may be reducedif:Rthe vehicle is not connected to an electricpower supply andRthe high-voltage battery is not fully chargedWith active "Pre-entry climate control at depar-ture time" the condition of charge of the high-voltage battery can be reduced, even if thecharge cable connector is connected.When the vehicle is cooled, the following func-tions are activated if required:RClimate control systemRBlowerRSeat ventilationWhen the vehicle is heated, the following func-tions are activated if required:RClimate control systemRBlowerRSeat heatingIf you have activated ionization via the multime-dia system, it is activated together with "Pre-entry climate control".Information on activating or deactivating "Pre-entry climate control at departure time" usingthe multimedia system (see the vehicle Opera-tor's Manual).

Setting the departure timeYou can set the departure time using the on-board computer or via the online access to thevehicle. The activation of the "Pre-entry climatecontrol at departure time" function can be linkedto this departure time. Your vehicle will then becooled or heated until the desired temperatureis reached in time for the set departure time."Pre-entry climate control at departure time"willbe activated a maximum of 55 minutes beforedeparture. If the departure is delayed, the vehi-cle will be heated or cooled for another fiveminutes.X To set the departure time: set the departuretime using the on-board computer(Y page 44). Set the departure time usingthe Mercedes connect me web App http://www.mercedes.me.

X To activate or deactivate "Pre-entry cli-mate control at departure time": activateor deactivate "Pre-entry climate control atdeparture time" using the on-board com-

puter. Activate or deactivate "Pre-entry cli-mate control at departure time" using theMercedes connect me web App http://www.mercedes.me.

The "Pre-entry climate control at departuretime" function switches off automatically whenthe vehicle is started. The following functionsremain active:RSeat heatingRSeat ventilationRIonizationTo deactivate "Pre-entry climate control atdeparture time": the activated "Pre-entry cli-mate control at departure time" can be deacti-vated using the& button (Y page 19).

Activating/deactivating the "Immedi-ate pre-entry climate control" functionusing the buttonYou can activate "Immediate pre-entry climatecontrol" even if the vehicle interior is already atthe desired temperature. This means, for exam-ple, that the vehicle interior continues to becooled or heated if the journey is interrupted forup to 50minutes and the interior temperature iskept constant.

X To activate or deactivate "Immediate pre-entry climate control": press button:.The blue or red indicator lamp in the buttonlights up or goes out.

The colors of the indicator lamps on button:have the following meanings:Rblue: cooling activatedRred: heating activatedRyellow: departure time is preselected

Operating the climate control systems 19

Climatecontrol

Z

Driving

Points to remember

General notesHybrid technology combines a fuel efficientinternal combustion engine with a powerfulelectric motor. In HYBRID mode, the hybriddrive systemautomatically selects themost effi-cient operating mode for every driving situation.Drive the vehicle in the usual manner.To save fuel in HYBRID mode, the hybrid drivesystem switches off the combustion engine asoften as possible during the journeywhen poweroutput requirements are low. When power out-put requirements are low, the electric motorpowers the vehicle. The engine is switched on,even while the vehicle is in motion, when ahigher power output is required. The engine isusually switched off when the vehicle is station-ary. Consequently, there is usually no engineidling as with combustion engine vehicles.For pulling away and accelerating, the electricmotor supports the internal combustion engineusing the power stored in the high-voltage bat-tery. In addition, the power is used for electricdriving, operation of the electric refrigerantcompressor and to supply the 12 V on-boardelectrical system. In this way the hybrid drivesystem helps to reduce your vehicle's fuel con-sumption.Observe the driving tips on plug-in hybrid oper-ation (Y page 26).

Recuperative Brake SystemIf you release the accelerator pedal when thevehicle is in motion, overrun recuperation is ini-tiated. The electric motor is operated as a gen-erator when in overrun mode and when youbrake. Hybrid technology converts the kineticenergy of the vehicle into electricity and storesit in the high-voltage battery.Observe the important safety notes for theRecuperative Brake System (Y page 11).

Important safety notesIf the engine is switched off by the ECO start/stop function, you open the driver's door andunfasten your seat belt:Ra message appears in the multifunction dis-play andRa warning tone soundsFurther information (Y page 45).All of the vehicle's systems remain active, if:Rthe vehicle is stationaryRthe combustion engine is switched off andRthe READY indicator in the instrument clusterlights up

If you remove your foot from the brake pedalwhile in transmission position D or R, the vehiclemay pull away automatically.Observe the notes on the READY display of theECO start/stop function (Y page 23).Vehicles with an electric motor generate muchless driving noise than vehicles with internalcombustion engines. As a result, your vehiclemay not be heard by other road users in certainsituations.Depending on the vehicle's equipment andcountry-specific regulations, the vehicle can beequipped with Acoustic Vehicle Indication.Acoustic Vehicle Indication generates a certainsound at a speed between 0 and 20 mph(30 km/h). This helps other road users, partic-ularly pedestrians and cyclists, to hear yourvehicle better. The sound can also be heardinside the vehicle.The volume depends on the engine speed. Thefaster you accelerate, the louder the sound is. Ata speed of over 20 mph (30 km/h) the sound isswitched off. Above this speed, the naturalsounds from the vehicle are sufficient that it canbe heard in good time by other road users.

20 DrivingDrivingandparking

Operating modes

Button: allows you to choose between differ-ent operating modes.X Press button: to change the operatingmode.The operating mode selected appears in theinstrument cluster (Y page 39).If it is not possible to change operatingmodes, the display message Change thecurrent drive program before chang‐ing the operating mode. or Exit man‐ual drive program M before changingthe operating mode. appears in the multi-function display. Further information on "Dis-play messages" (Y page 45).

: Operating mode selected; Operating mode unavailable= Operating mode available

HYBRID RElectric mode or drivingwith the internal combus-tion engine is possibleRAutomatic selection ofdrive mode with electricmode as often as possi-bleRThe high-voltage batteryis discharged to approx-imately 15%.RTo subsequently main-tain the condition ofcharge of the high-volt-age battery, the electricoutput is reduced. Allvehicle functions such aselectric mode, energyrecuperation or boostmode, for example, arestill available.

E-MODE RPurely electric operationuntil the performancelimit of the electric motoris reached

E-SAVE RElectric mode or drivingwith the internal combus-tion engine is possibleRAutomatic selection ofdrive mode with electricmode as often as possi-bleRThe current condition ofcharge of the high-volt-age battery is maintainedso the electrical energycan be used at a latertime.

CHARGE RElectric drive is not pos-sibleRCharging the high-volt-age battery while drivingusing the combustionengine

In the Sport drive program (Y page 22) andduring manual gearshifting (Y page 23), onlythe HYBRID operating mode is available.If you switch from the Sport drive program tothe Comfort drive program, the HYBRID oper-ating mode remains selected.

Driving 21

Drivingandparking

If manual gearshifting is deactivated, the auto-matic transmission shifts:Rinto the drive program that was last selected,andRinto the driving mode that was last selectedIf you change the drive program, the operatingmode thatwas last selected is stored for approx-imately 60 seconds. After this time, theHYBRIDoperating mode is automatically activated.

Starting the engineThe vehicle starts in electric mode without theinternal combustion engine (noiseless start).The internal combustion engine starts only afterthe power demanded by the driver exceeds theavailable power that the electric motor can cur-rently provide.Noiseless start operation is dependent on theoutside temperature and the operating temper-ature of the internal combustion engine. If not allconditions for noiseless start operation are ful-filled, the vehicle starts with the internal com-bustion engine.Observe the notes on starting in the vehicleOperator's Manual.

X Switch on the ignition.X Depress the brake pedal.X Start the vehicle (see the vehicle Operator'sManual).When the vehicle is operational, the READYindicator lights up in themultifunction display(Y page 39).

Pulling awayX Depress the brake pedal and keep itdepressed.

X Shift the transmission to position D or R.X If the Apply Brake to Shift from 'P'display message appears in the multifunction

display, depress the brake pedal more firmlyand select the desired transmission position.

X Release the brake pedal.X Carefully depress the accelerator pedal.You can find further information on pulling awayin the vehicle Operator's Manual.

Drive programs

DYNAMIC SELECT controllerSelect the drive program using the DYNAMICSELECT controller. Depending on the drive pro-gram selected the following vehicle character-istics will change:Rthe drive (engine and transmission manage-ment)Rthe suspensionRthe steering.Rthe energy managementEach time you start the engine with the ignitionSmartKey or the Start/Stop button, the Com-fort drive program is activated. You can findfurther information on starting the engine in thevehicle Operator's Manual.

X Turn DYNAMIC SELECT controller: asmanytimes as necessary until the desired driveprogram is selected.The status icon of the selected drive programis shown in the multifunction display.In addition, the current drive program settingsare displayed briefly in themultimedia systemdisplay.


Available drive programs:

Individual RIndividual settings

Sport RSporty driving style withincreased boost modeRElectric-only operation isnot possible

Comfort RComfortable, economicaldriving styleRElectric-only operation ispossible

Slippery ROptimal driving charac-teristics on slippery orsnow-covered roadsRElectric-only operation ispossible

Further information on the drive program (seethe vehicle Operator's Manual).Using the steering wheel paddle shifters, youcan temporarily change gears yourself. For fur-ther information on the manual drive program(Y page 23).

Manual gear shiftingUsing the steering wheel paddle shifters, youcan temporarily change gears yourself. Thetransmission must be in position D. When youactivate manual gearshifting, the combustionengine is automatically switched on.X To activate: pull the left or right steeringwheel paddle shifter.Manual gearshifting is activated temporarily.The selected gear andM appear in the multi-function display.

The ECO start/stop function is not availablewhen manually changing gear.Further information on manual gearshifting (seethe vehicle Operator's Manual).

ECO start/stop function

General notesThe ECO start/stop function switches the com-bustion engine off automatically when the vehi-cle stops moving and at speeds below 80 mph(130 km/h) (Y page 24).

All vehicle systems remain active, e.g. the auto-matic climate control.The ECO start/stop function is neither availablein the Sport drive program nor during manualshifting.

Automatic engine switch-offThe engine is switched off automatically, includ-ing when:Rthe driver removes his/her foot from theaccelerator in theComfort drive programanda speed of 80 mph (130 km/h) is not excee-ded (Y page 24)Rthe engine has reached its operating temper-atureRthe driver’s seat belt is fastened and thedriver’s door is closedRthe driver only slightly depresses the accel-erator pedal in order to, for example, maintainthe current speed for a limited distanceRthe hood is closed and engaged properlyRthe high-voltage battery is charged suffi-cientlyRno malfunctions are present in the hybriddrive system

The internal combustion engine will not beswitched off automatically, if:Rthe self-diagnosis function of the engineman-agement is activeRthere is a malfunction in the hybrid drive sys-temRthe climate control of the vehicle requires itRthe high-voltage battery is charging(Y page 40).

Automatic engine startThe automatically switched-off internal combus-tion engine starts automatically in certain situa-tions, if:Rthe power demand from the driver via theaccelerator pedal is greater than the electricmotor alone can provideRthe driver switches to the Sport drive pro-gram or to manual gearshiftingRthe condition of charge of the high-voltagebattery has reached the lower limitRthe driver has selected theCHARGEoperatingmode

Driving 23

Drivingandparking

Overrun modeIn overrun mode, the combustion engine isswitched off and is disconnected from the drivetrain. The electric motor:Rgenerates low thrust, which corresponds tothe overrun mode of an active combustionengineRfunctions as a generator and produces thenecessary energy for the auxiliary consumersand charges the high-voltage battery

Overrun mode is available in the Comfort driveprogram at speeds below 80 mph (130 km/h).

Route-based operating strategyFor the route-based operating strategy, the sys-tem factors in information about the expectedroute when route guidance is active.The information on the route is provided by themultimedia system and includes the following:Rroad categoriesRspeed limitationsThe use of electric energy is automatically opti-mally distributed from the beginning to the endof the journey, using information about theroute. The distribution is pre-emptive and takesinto consideration:Rthe sections of the journey aheadRthe energy consumption on the whole route

The condition of charge of the high-voltage bat-tery is thus systematically controlled. In addi-tion, the control function takes into accountthat:Rthe fuel saving through the use of electricalenergy can vary, dependent on the route (e.g.urban, interurban or highway)Rthe use of electrical energy is held availablefor electric driving, particularly for urbanroutes

The vehicle thus automatically selects the opti-mum driving mode for the respective section ofthe route.The route-based operating strategy is availableunder the following conditions:Rthe Individual drive program is selectedRin the Individual drive program, the ECO set-ting is selected under DriveRHYBRID driving mode is selectedRactive route guidance is activatedRsuitable map data is availableWhen the route-based operating strategy isbeing used, the area in front of the vehicle isshown as green in the multifunction display.


Problems with HYBRID operation

Internal combustion engine


You cannot start theinternal combustionengine. The multifunc-tion display shows nodisplay messages. TheREADY indicator in themultifunction display isoff.

For example, self-diagnosis is not yet complete or the hybrid drivesystem is malfunctioning.X Switch off the ignition and turn it back on.X Try to start the internal combustion engine again.If the internal combustion engine still does not start:X Consult a qualified specialist workshop.

You wish to pull away,but the ECO start/stopfunction does not startthe internal combustionengine. The READY indi-cator in the multifunc-tion display is off.

The ECO start/stop function has failed. The warning and indicatorlamps in the instrument cluster light up.X Shift the transmission to P.X Switch off the ignition and turn it back on.X Start the engine.

The hybrid drive system is malfunctioning.X Consult a qualified specialist workshop.

Recuperative Brake System


Braking resistance isreduced and brake pedaltravel is longer thanusual.

G Risk of accidentThe Recuperative Brake System is malfunctioning.X Observe the additional display messages in the multifunction dis-play (Y page 45).

X Observe the information regarding indicator and warning lamps inthe instrument cluster (Y page 49) .

Driving 25

Drivingandparking

Z

Hybrid drive system


The hybrid drive systemhas been switched offautomatically.

You have been in an accident.The hybrid drive system remains switched off if:Rthe internal combustion engine cannot be restarted after a fewseconds.Rthe red 6 restraint system warning lamp in the instrument clus-ter is lit.

X Consult a qualified specialist workshop.

The hybrid drive systemhas been switched offautomatically. The multi-function display alsoshows a display mes-sage.

An electrical short circuit has occurred in the hybrid drive systemor anelectrical connection has been disconnected.X Observe the additional display messages in the multifunction dis-play (see the vehicle Operator's Manual).


Driving tips

General driving tipsDrive carefully and maintain a safe distancefrom the vehicle in front. Avoid frequent andsudden acceleration as well as abrupt braking.During partial electric driving, pulling away andacceleration, the electric motor supports theinternal combustion engine.During overrun in transmission position D andbraking, the electric motor will operate as a gen-erator.Further information on the ECO start/stop func-tion (Y page 23).You can find further driving tips in the vehicleOperator's Manual.

Stationary vehicleIf the vehicle is stopped, the combustion engineis, for the most part, switched off. Automaticclimate control continues to function. The elec-tromechanically assisted steering gear allowsyou to use the power steering without reducedcomfort.

AccelerationDepending on the operating mode, pulling awayand driving under low load conditions are per-formed:Rentirely by electric propulsionRin combination with the internal combustionengine

When accelerating rapidly under increased orfull load, increased boost mode is utilized. Theelectric motor supports the combustion engineby providing additional drive torque.

Overrun mode or brakingThere are three possible operating modes whenthe hybrid vehicle is decelerating:Renergy recovery takes place even when thevehicle is decelerating purely in overrunmode(Y page 20). The electric motor operates as agenerator and stores the recovered energy inthe high-voltage batteryRwhen the brakes are applied lightly, the vehi-cle is slowed down further by the electricmotor. This increases the energy recoverytaking place (Y page 20). The electric motoroperates as a generator and stores the recov-ered energy in the high-voltage batteryRduring heavy braking, the service brake is alsoused to slow down the vehicle. The two sys-tems work together

26 Driving tipsDrivingandparking

Urban drivingIn city traffic, energy is recuperated during fre-quent deceleration phases.The vehicle can be driven by the electric motoralone up to a speed of approximately 80 mph(130 km/h).The vehicle is driven by the electric motor aloneonly when all conditions for the automaticengine switch-off are fulfilled.Further information on the automatic engineswitch-off (Y page 23).

Driving on inter-urban roadsThe following phases are possible when drivingon inter-urban roads:Rrapid acceleration (boost mode)Renergy recuperationRelectric operation modeThe vehicle can be driven by the electric motoralone up to a speed of approximately 74 mph(120 km/h).A great deal of recovered energy may be avail-able, depending on the route profile. Thisreduces consumption and emissions.

Highway drivingWhen driving on a highway, switching off thecombustion engine has a particularly positiveeffect on fuel consumption and emissions.If the driver removes his/her foot from theaccelerator pedal in the Comfort drive programand a speed of 80mph (130 km/h) is not excee-ded, the combustion engine is automaticallyswitched off.Further information on the automatic engineswitch-off (Y page 23).

Refueling

Refueling

General informationObserve the important safety notes under"Refueling" in the vehicle Operator's Manual.

Pressure in the fuel tank must be releasedbefore refueling. Otherwise, the fuel filler flapcannot be opened.If you unlock/lock the vehicle from the outside,the fuel filler flap also unlocks/locks.The position of the fuel filler cap is displayed inthe instrument cluster8. The arrow next tothe filling pump indicates the side of the vehicle.

Preparing to refuelX Switch off the engine.X Remove the SmartKey from the ignition lock.or, on vehicles with KEYLESS‑GO:X Open the driver's door.The vehicle electronics now have status 0.This is the same as the SmartKey having beenremoved.The driver’s door can be closed again.

Opening the fuel filler flap (PLUG-INHYBRID vehicles)

X Pull switch;.Indicator lamp: flashes and the PleaseWait Depressurizing Tank messageappears in the multifunction display.If the fuel filler cap is unlocked, indicatorlamp: lights up.The Tank is Depressurized Ready forRefueling message appears in the multi-function display.Please be sure to observe the information onrefueling on the fuel filler flap.

There is a malfunction if:Rindicator lamp: first flashes and then goesoutRthe yellow engine diagnostics warning lamplights up

Refueling 27

Drivingandparking

Z

i From a speed of 1 mph (2 km/h), the fuelfiller flap can no longer be opened.

i The unlocking process for the fuel filler capmay take up to 15 minutes.

: To open the fuel filler flap; To insert the fuel filler cap= Instruction label for fuel type to be refueled? Tire pressure tableX Press the fuel filler flap in the direction ofarrow:.The fuel filler flap swings up.

X Turn the fuel filler cap counterclockwise andremove it.

X Insert the fuel filler cap into the holder on theinside of the fuel filler flap.

X Completely insert the filler neck of the fuelpump nozzle into the tank, hook in place andrefuel.

X Only fill the tank until the pump nozzleswitches off.Do not add anymore fuel after the pump stopsfilling for the first time. Otherwise, fuel mayleak out.

Closing the fuel filler flapX Replace the cap on the filler neck and turnclockwise until it engages audibly.

X Close the fuel filler flap.Close the fuel filler flap before locking the vehi-cle.If you drive at speeds above 1 mph (2 km/h)with the fuel filler flap open, the Fuel FillerFlap Open message is shown in the multifunc-tion display.If you are driving with the fuel filler cap open, the8 reserve fuel warning lamp flashes. A mes-sage appears on the multifunction display.In addition, the; Check Engine warninglamp may light up.Information on indicator and warning lamps inthe instrument cluster (see the vehicle Opera-tor's Manual).

Problems with the fuel tank

Problem Possible causes/consequences and M Solutions

The fuel filler flap cannotbe opened.

The fuel filler flap is not unlocked.X Unlock the vehicle (see the vehicle Operator's Manual).X Depressurize the fuel tank (Y page 27).

The SmartKey battery is discharged or nearly discharged.X Unlock the vehicle using the mechanical key (see the vehicle Oper-ator's Manual).

The fuel filler flap is unlocked, but the opening mechanism is jammed.X Consult a qualified specialist workshop.

28 RefuelingDrivingandparking

Charging the high-voltage battery



G WARNINGIn the event of a vehicle fire, the internal pres-sure of the high-voltage battery can exceed acritical value. In this case flammable gasescapes through a ventilation valve on theunderbody. The gas can ignite. There is a riskof injury.Leave the danger zone immediately. Securethe danger area at a suitable distance, whilstobserving legal requirements.

G DANGERConnecting the charging cable to the mainssupply via incorrectly installed mains socketsor by means of adapters, extension cables orsimilar could cause a fire or an electric shock.There is a risk of fatal injury.To avoid hazardous situations, observe thefollowing:ROnly connect the charging cable to mainssockets:- which have been properly installed and- which have been inspected by a qualifiedelectrician

RFor safety reasons, only use the chargingcables supplied with the vehicle, or charg-

ing cables which have been approved foruse with this vehicle.RNever use a damaged charging cable.RDo not use:

- extension cables- extension reels- multiple socketsRNever use socket adapters to connect thecharging cable to the mains socket. Theonly exception being if the adapter hasbeen tested and approved by the manufac-turer for charging the high-voltage batteryof an electric vehicle.RObserve the safety notes in the operatinginstructions for the socket adapter.

G DANGERConnecting the charging cable to the vehiclevia an incorrectly installed wallbox or bymeans of adapters, extension cables or simi-lar could cause a fire or an electric shock.There is a risk of fatal injury.To avoid hazardous situations, observe thefollowing:ROnly connect the charging cable to a wall-box if:- the wallbox is properly installed- the wallbox has been inspected by aqualified electrician

- the charging cable is not damaged.RDo not extend the charging cable.RDo not use an adapter.RAlways observe the safety notes in the wall-box's operating instructions.

The vehicle's high voltage electrical system isunder high voltage.RDo not tamper with the high-voltage compo-nents or the orange cables of the high-voltageelectrical system.RDo not touch high-voltage components or theorange cables of the high-voltage electricalsystem when a vehicle has been involved in acrash.

Charging the high-voltage battery 29

Drivingandparking

Z

RNever touch damaged components or thedamaged orange cables of the high-voltageelectrical system.RDo not remove the covers of the high-voltageelectrical system components that aremarked with a warning sticker.

General notes

Method of operationThe vehicle is equipped with a high-voltage bat-tery for driving. The high-voltage battery storesthe energy needed to operate the electric motorand releases it again.The electric motor uses energy that has beenstored in the high-voltage battery when pullingaway, accelerating and during the journey.In overrun mode, kinetic energy is converted bymeans of energy recuperation into electricalenergy and stored in the high-voltage battery.Information on overrun mode (Y page 24).The high-voltage battery can be charged as fol-lows:Rthrough energy recuperationwhile the vehicleis in motionRthrough the combustion engine while drivingin CHARGE operating mode (Y page 21)Rwith the relevant charging cable at an electri-cal outlet while the vehicle is stationaryRat a wallbox while the vehicle is stationaryRat a charging station while the vehicle is sta-tionary

The high-voltage battery can be charged in anominal voltage range from 100 V to 240 V.You can view the condition of charge of the high-voltage battery in the multifunction display.Information about this can be found under"Energy flow display" (Y page 40).

High and low outside temperaturesLow outside temperaturesAt very low outside temperatures the maximumpower output of the high-voltage battery may bereduced. The high-voltage battery is then nolonger able to provide the normal electricalpower output.High outside temperaturesTo prevent damage to the high-voltage batterydue to very high outside temperatures, the max-

imum power output of the high-voltage batteryis reduced by the vehicle.

Energy consumption and electricalrangeThe maximum electrical range is generallyreduced by:Rhigh and low outside temperaturesRoperating the climate control systemRswitching on consumersThe battery's physical characteristics are suchthat leaving the vehicle parked for long periodsat low outdoor temperatures without charging itcan lead to:Ra reduction in battery performanceRlonger charge times

Notes on battery careAvoid storing or transporting the vehicle atexcessively high or low temperatures over a longperiod.If you park the vehicle and leave it stationary forlong periods:Rcheck the condition of charge of the high-voltage battery more oftenRconnect the vehicle to a power supplyThis prevents self-discharge and damage to thehigh-voltage battery.

Terms of usePlease note the information on exceptions andlimitations in warranty documentation and inthe Maintenance Booklet.

Handling the charging cable and charg-ing cable controlsAlways read the notes on the charging cable onthe inside of the charge socket flap.Do not leave the charging cable controls(Y page 32) hanging loose from an electricaloutlet. Otherwise, this could result in a poorcontact with the electrical outlet and malfunc-tions when charging the vehicle.

30 Charging the high-voltage batteryDrivingandparking

To ensure that the brackets within the chargingcable controls are not subjected to incorrectloads, observe the following:RNever lift or carry the controls by the chargingcable connector or the mains plug.RTo transport the charging cable, the chargingcable can be:- wrapped around the controls or- secured to the housing of the controls

Heat generated by the charging cableand charging cable connectorPay attention to the "Important safety notes"(Y page 29).During the charging process, the charging cableand charging cable connector may heat up.The charging cable and the charging cable con-nector will only heat up within the permissiblelimiting values, provided that:Rthe power supply and the charging cable arenot damagedRthe instructions for handling the chargingcable and controls on the charging cable areobserved

If the charging cable or charging cable connec-tor become too hot, have the mains power sup-ply checked.

Protection device against overvoltage! Overvoltage in the mains supply may dam-age the vehicle. For this reason, the vehicle isequipped with a protection device againstovervoltage in the mains supply. This devicemay be triggered during severe thunder-storms, for example, and may lead to the buil-ding's fuse being tripped and an interruptionin the power supply. These functions protectthe vehicle. After the building fuse is switchedon again, the charging process resumes auto-matically. Following an interruption in thepower supply or tripping of the building's fuse,it may take up to 10 minutes for charging toresume automatically.

Switch on the building protection system againafter it has been triggered. Otherwise, thecharging process cannot be continued.

General information about the chargingprocedurePay attention to the "Important safety notes"(Y page 29).The vehicle socket is located in the rear bumperon the right below the tail lamp.The charge socket flap and the vehicle are cen-trally locked or unlocked simultaneously.

Charging the high-voltage battery viathe electrical outlet

Charging cable for electrical outlets

Important safety notes! Only use the charging cable to charge thehigh-voltage battery. Do not use the chargingcable for other purposes. It may otherwise bedamaged.

The vehicle is supplied with a country-specificcharging cable for connection to amains socket.Only use the charging cable supplied with thevehicle or a charging cable approved for thevehicle.

i If you use the supplied 12 A charging cableto charge a high-voltage battery:Rthe charge time increases considerablyRelectrical consumption increases consider-ably

Where possible, charge the high-voltage bat-tery at a charging station (Y page 35). Onlythen can certified electrical energy consump-tion levels be reached.

i The charging process can vary depending onthe power supply. Therefore, always observethe local information.

Information about charging from a wallbox(Y page 34).Information on charging at a charging station(Y page 35).

Stowing the charging cableThe charging cable can be stowed and securedin the bag provided in the cargo compartment ofthe vehicle.


Drivingandparking

Z

Controls on the charging cable

: On-board voltage indicator; Protective and indicator system display= Charge current indicator? Charge current setting buttonWhen displays: and; on the charging cablelight up, this means the following:

Display:

Lights upgreen

The on-board voltage is con-nected. The high-voltage bat-tery can be charged.

Flashes red The power supply from thebuilding is faulty.

Display;

Lights upgreen

There are no malfunctions.The high-voltage battery canbe charged.

Flashes red The protective and indicatorsystem has detected a mal-function due to an internalmalfunction. The high-voltagebattery cannot be charged.

If the control detects residual current or a mal-function, the charging process is halted. Oncethe malfunction has been rectified the chargingprocess is resumed automatically.For information on problems relating to thecharging process, see (Y page 35).

Setting the maximum charge currentG WARNINGIf the charge current draw via a mains socketis too high during the charging process, the

external electrical system may overheat.There is a risk of fire.Before beginning the charging process, checkthe maximum permissible charge currentlocally. Consult a qualified expert to do sowhere necessary.If necessary, adjust your vehicle's settings.

! An excessive charge current can blow a fuseor lead to overheating of the external powersupply. Check whether the external powersupply is compatible with the set charge cur-rent. If necessary, lower the set charge cur-rent or use another power socket.

Before starting the charging process at a powersocket, check the maximum permissible chargecurrent for the relevant power socket or thebuilding.You can set the maximum permissible chargecurrent:Ron the controls of the charging cableRin the Settings menu of the on-board com-puter (Y page 43)

The lower value of the two charge current set-tings – on the charge cable controls and in theon-board computer – determines the maximumcharge current. If you cannot set the precisemaximum permitted charge current, select thenext lowest available value.Only set themaximumpermitted charge currentin the on-board computer menu if:Rit is not possible to set the charge current onthe charging cableRthe precise maximum permitted charge cur-rent can only be set via the on-board com-puter

How to set the maximum permissible chargecurrent on the charging cable, is described asfollows.X To adjust the setting: press button?repeatedly until the desired setting is selec-ted in display=.RTwo LEDs are flashing: minimum settingRAll LEDs are flashing: maximum setting


If, after the charging process, the charging cableis:Rleft connected to the power socket, the cur-rently selected valueswill be used for the nextcharging process.Rremoved from the power socket, the valueswill be reset to the minimum setting for thenext charging process. You may then need toreset the values of the maximum charge cur-rent.

i If the vehicle requires more time than usualwhen charging, check the maximum chargecurrent settings using the controls on thecharging cable or in the on-board computer'smenu.

Indicator lamp on the vehicle socketWhen the indicator lamp on the vehicle socketlights up, this means the following:

Indicatorlamp

Flashesorange

The connection between thevehicle and the currentsource is being establishedbefore charging begins.

Flashesgreen

The high-voltage battery isbeing charged.

Flashes red A malfunction has occurredwhile charging.The indicator lamp goes outafter approximately90 seconds.

Lights uporange

A charging break for the high-voltage battery is takingplace.The indicator lamp goes outafter approximately90 seconds.

Lights upgreen

The high-voltage battery isfully charged.The indicator lamp goes outafter approximately90 seconds.

i If the indicator lamp is off, lock or unlock thevehicle. The indicator lamp then displays thecurrent status of the charging process again.

Connecting the charging cable

X Shift the transmission to position P.X Switch the ignition off.X Press the charge socket flap in the directionof arrow:.The charge socket flap swings up.

X Press fastener; to the left.Socket cap= is open.

X Insert the power supply plug into the electri-cal outlet to the stop.

X Insert the charging cable connector into vehi-cle socket? to the stop.Indicator lampA first flashes orange andthen green.The high-voltage battery is being charged.

If the charging cable is connected to the vehicle,you cannot start the engine or move the vehicle.As soon as the charging process begins, you candisplay the charging prediction on the Settingson-board computer menu. The charging predic-tion is either the anticipated condition of chargeat the programed departure time or the timewhen the high-voltage battery will be fullycharged (Y page 44).

i Depending on the temperature, the fan andbattery cooling systemmay audibly switch onduring the charging process.


Drivingandparking

Z

Removing the charging cableThe high-voltage battery is fully charged when:Rthe charge level display reaches 100% in themultifunction display (Y page 40)Rthe indicator lamp in the vehicle socket lightsup green after unlocking or locking the vehicle

X Press and hold buttonB on the chargingcable connector and remove the chargingcable connector from the vehicle socket.

X Close socket cap=.X Close charge socket flap:.X Remove the mains plug from the mainssocket and safely stow away the chargingcable inside the vehicle (Y page 31).

Charging the high-voltage batteryfrom the wallbox

General notesIt is recommended that you charge your vehicleusing a wallbox or at a charging station.Make sure that themaximumcharging current isnot limited in the Settings menu of the on-board computer. You must select the maximumvalue if charging at a wallbox or a charging sta-tion (Y page 43).Pay attention to the "Important safety notes"(Y page 29).

Connecting the charging cable

X Shift the transmission to position P.X Switch the ignition off.X Press the charge socket flap in direction ofarrow:.The charge socket flap swings up.

X Press fastener; to the left.Socket cap= is open.

X Insert the charging cable connector into vehi-cle socket? to the stop.Indicator lampA first flashes orange andthen green.The high-voltage battery is being charged.

If the charging cable is connected to the vehicle,you cannot start the engine or move the vehicle.As soon as the charging process begins, you candisplay the charging prediction in the Settingson-board computer menu. The charging predic-tion is either the anticipated condition of chargeat the departure time set or the time when thehigh-voltage battery will be fully charged(Y page 44).

i Depending on the temperature, the fan andbattery cooling systemmay audibly switch onduring the charging process.


Removing the charging cableThe high-voltage battery is fully charged when:Rthe charge level display reaches 100% in themultifunction display (Y page 40)Rthe indicator lamp in the vehicle socket lightsup green after unlocking or locking the vehicle

X Press and hold buttonB on the chargingcable connector and remove the chargingcable connector from the vehicle socket.

X Close socket cap=.X Close charge socket flap:.

Charging the high-voltage battery atthe charging stationBefore beginning the charging process at acharging station without communication capa-bilities, you must first activate the station, e.g.using an RFID card. Observe the on-site opera-tor instructions for the charging station.The connection for the vehicle at a charging sta-tion is identical to the connection on a wallbox(Y page 34).

Problems with the charging process

Problem Possible causes/consequences and M Solutions

The charge socket flapcannot be opened.

The charge socket flap is not unlocked.X Unlock the vehicle (see the vehicle Operator's Manual).If the SmartKey battery is discharged:X Unlock the driver's door using the mechanical key (see the vehicleOperator's Manual).

orX Unlock the vehicle centrally from the inside (see the vehicle Oper-ator's Manual).

The charge socket flap is unlocked, but the opening mechanism isjammed.X Lock the vehicle and unlock it again.If, after that, the opening mechanism is still jammed:X Consult a qualified specialist workshop.


Drivingandparking

Z


The high-voltage batteryis not being charged.

The indicator lamp on the vehicle socket flashes red.A malfunction has occurred during the initialization of the chargingprocess or during charging.X Disconnect the charging cable connector from the vehicle socketand plug it back into the vehicle socket.

If the problem persists:X Have the mains socket checked for correct function or use anothermains socket.

orX Use a different charging station.orX Consult a qualified specialist workshop.

The indicator lamp on the vehicle socket does not light up.No connection can be established between the vehicle and the exter-nal power source.X Connect the charging cable once again.If the problem persists:X Have the mains socket checked for correct function or use anothermains socket.

orX Use a different charging station.orX Consult a qualified specialist workshop.

The charging cable con-nector cannot beremoved from the vehi-cle socket.

The snap fastener on the charging cable connector is locked.X Press and hold the button on the charging cable connector. Thesnap fastener on the vehicle socket is unlocked.

X Remove the charging cable connector from the vehicle socket.If the snap fastener on the charging cable connector is locked:X Press and hold the button on the charging cable connector and tryto release the lock.

Online access to the vehicle

General information

G WARNINGIf you operate information systems and com-munication equipment integrated in the vehi-cle while driving, you will be distracted fromtraffic conditions. You could also lose controlof the vehicle. There is a risk of an accident.

Only operate the equipment when the trafficsituation permits. If you are not sure that thisis possible, park the vehicle paying attentionto traffic conditions and operate the equip-ment when the vehicle is stationary.

i Operation of integrated information sys-tems and communications equipment inthe vehicle: you must observe the legalrequirements for the country in which you arecurrently driving.


You can call up remote query and remote con-figuration functions for your vehicle using onlineaccess to the vehicle. This is possible from anInternet-enabled computer, as well as manymodern smartphones.Please call the Mercedes-Benz Customer Assis-tance Center (USA) at the hotline number1-800-FOR-MERCedes (1-800-367-6372) toobtain the relevant Internet address.Online access to the vehicle is restricted to thecontractual periods of mbrace. Activatedaccess to the mbrace emergency call system isrequired for use.In order to be able to use online access to thevehicle, you must agree to the local terms ofuse.Further information about the supported enddevices, available languages and contractualperiods is available at any authorizedMercedes-Benz Center.In order to be able to call up online access to thevehicle, the vehicle must be connected to theInternet (Y page 37).

Notes on data protectionRemember that online access to the vehicleoffers access to your data.

i Prevent unauthorized persons fromaccessing this data.Every person who has access to the informa-tion stated can use the functions of the onlineaccess to the vehicle.

i Information when selling a vehicle orbuying a used vehicle:RIf you sell your vehicle, you are obliged todelete the vehicle from your personal areaon the online access to the vehicle.RIf you have bought a used vehicle, it is pos-sible that the previous owner still hasaccess to the online access to the vehicle.

Calling up functionsThe online access to the vehicle allows youaccess to your vehicle's information and func-tions using remote query and remote configu-ration.

The following functions can be accessed:Rrequest the current condition of charge of thehigh-voltage batteryRprogram the departure time (Y page 44)Rset or activate the "Pre-entry climate controlat departure time" function (see the separateCOMAND operating instructions)

Information on additional functions and operat-ing instructions can be found within the onlineaccess to the vehicle.

Connecting the vehicle to the Interneti This function is not available in all countriesand requires activated access to the mbraceemergency call system.

You can use the online access to the vehicle ifthe vehicle has a connection to the Internet via amobile phone network. The necessary data istransmitted by radio. The vehicle automaticallyrecognizes whether a connection to the Internetis possible or not. No presets are necessary.

i Restrictions in reception are possible if thevehicle is in an underground car park, forexample. Restrictionsmay also occur in areaswith poor mobile network coverage.

Parking

X Apply the electric parking brake.The red! indicator lamp in the instrumentcluster lights up.

X Use the DIRECT SELECT lever to shift theautomatic transmission to P.

X Switch the ignition off.The READY indicator in the instrument clustergoes out.

You can find further information on parking andswitching off the combustion engine in the vehi-cle Operator's Manual.

Parking 37

Drivingandparking

Z


G WARNINGIf you operate information systems and com-munication equipment integrated in the vehi-cle while driving, you will be distracted fromtraffic conditions. You could also lose controlof the vehicle. There is a risk of an accident.Only operate the equipment when the trafficsituation permits. If you are not sure that thisis possible, park the vehicle paying attentionto traffic conditions and operate the equip-ment when the vehicle is stationary.

Youmust observe the legal requirements for thecountry in which you are currently driving whenoperating the on-board computer.

G WARNINGIf the instrument cluster has failed or mal-functioned, you may not recognize functionrestrictions in systems relevant to safety. Theoperating safety of your vehicle may beimpaired. There is a risk of an accident.Pull over as soon as it is safe to do so andconsult a qualified specialist workshop.

The on-board computer only showsmessages orwarnings from certain systems in the multifunc-tion display. You should therefore make sureyour vehicle is operating safely at all times.For an overview, see the instrument panel illus-tration (Y page 9).You can find further information about operatingthe on-board computer in the vehicle Operator'sManual.

Displays and operation

Electric motor performance display

The power display for the electric motor is loca-ted on the right-hand side of the instrumentcluster.RArea: to; (E-DRIVE):This shows the electric output from the elec-tric motor, e.g. during electric operation or inboost mode.When the motor is switched on, the needle isat limit:. With increasing pressure on theaccelerator pedal the needle moves from:to;.Driving with the electric motor: when theneedle reaches limit; the combustionengine is switched on. If the displayapproaches limit; and you remove your footfrom the accelerator pedal, the needle dropsagain. The combustion engine is not switchedon. At low speeds, you can thereby control theelectric operation usage so that you only drivein electric mode.Driving with the combustion engine: theelectric motor supports the combustionengine by providing additional drive torque(boost mode) until the needle reacheslimit;.You can also select the operating mode of thehybrid drive system (Y page 21).RArea= to? (CHARGE):This shows the recuperated energy which isstored in the high-voltage battery as electricalenergy.When the needle reaches limit?, the maxi-mum recuperative braking power has beenreached. The mechanical brake is activated.

38 Displays and operationOn

-board

computerand

displays

Coolant temperature gauge

G WARNINGOpening the hood when the engine is over-heated or when there is a fire in the enginecompartment could expose you to hot gasesor other service products. There is a risk ofinjury.Let an overheated engine cool down beforeopening the hood. If there is a fire in theengine compartment, keep the hood closedand contact the fire department.

! A display message is shown if the coolanttemperature is too high.If the coolant temperature is over 248 ‡(120 †), do not continue driving. The enginewill otherwise be damaged.

The multifunction display shows the coolanttemperature in the Coolant submenu.Under normal operating conditions and with thespecified coolant level, the coolant temperaturemay rise to 248 ‡ (120 †).

Multifunction display

: Permanent display: outside temperature orspeed (Y page 44)

; Time= Text field? Menu bar

A Drive programB Transmission positionAdditional displays in the multifunction dis-play:Rõ Vehicle operational (Y page 22)Rñ Operating mode, other operating modedisplays (Y page 21)Rè Electric range (Y page 9)

Menus and submenus

Menu overviewPress the= or; button on the steeringwheel to call up themenu bar and select amenu.Operating the on-board computer (see the vehi-cle Operator's Manual).The following menus have been added to orchanged in order to include displays and set-tings for hybrid operation:RTrip menu (Y page 40)

- Energy flow display- Displaying the current fuel consumption- Displaying the total range and electricalrange

- Trip computer "FromStart" or "FromReset"RService menu

- Displaying the coolant temperature(Y page 39)

RSettings menu (Y page 43)- Hybrid submenu for setting the maximumcharge current and departure time for pre-entry climate control or the charging proc-ess (Y page 43). In addition, the chargingprediction for the current charging processis displayed.

- Instrument Cluster submenu for select-ing the outside temperature or speed as thepermanent display in the multifunction dis-play (Y page 44).

Menus and submenus 39

On-board

computerand

displays

Z

Trip menu

Energy flow display

Selecting the energy flow display in themultifunction displayX Press the= or; button on the steeringwheel to select the Trip menu.

X Use: or9 to select Energy Flow.X Confirm by pressinga on the steeringwheel.The active components of the hybrid drivesystem are highlighted in the energy flow dis-play.

Overview

: Internal combustion engine; Electric motor= High-voltage battery condition of charge? High-voltage batteryA Energy flowThe active components of the hybrid drive sys-tem are highlighted.The energy flow is indicated by arrows. Thearrows have a different color depending on theoperating state.

Automatic engine switch-off

The engine and electric motor are switched off.The arrows for the energy flow are not shown.The condition of charge of the high-voltage bat-tery is shownwhen the SmartKey is in position2in the ignition lock.

Engine running while vehicle is stationary

The combustion engine is running while thevehicle is stationary. The high-voltage battery isnot being charged.The arrows for the energy flow are not shown.The combustion engine is highlighted.

Charging while vehicle is stationary

The engine powers the electric motor. The elec-tric motor operates as a generator. The high-voltage battery is being charged.The arrow representing energy flow is shown inwhite.

40 Menus and submenusOn

-board

computera

nddisplays

Driving using the engine

The engine powers the vehicle.The arrows for the energy flow are shown inwhite.

Driving using the engine plus boost mode

If you accelerate the vehicle rapidly, the electricmotor supports the combustion engine by pro-viding additional drive torque.The arrows for the energy flow are shown in red.

Driving using the engine plus energyrecovery

The engine powers the vehicle. The electricmotor is operating as a generator, e.g. in over-run mode and when braking (Y page 24). The

kinetic energy of the vehicle is converted intoelectrical energy. The high-voltage battery isbeing charged.The arrows for the energy flow are shown ingreen.

Driving using the internal combustionengine and charging the high-voltage bat-tery

The engine powers the vehicle. The engine alsopowers the electric motor. The electric motoroperates as a generator. The high-voltage bat-tery is being charged.The arrows for the energy flow are shown inwhite.

Driving using the internal combustionengine and discharging the high-voltagebattery

The engine powers the vehicle. If the vehicle isapproaching a downhill gradient with a highpotential for energy recuperation, the conditionof charge of the high-voltage battery is inten-tionally kept low or intentionally reduced.The arrows for the energy flow are shown inwhite.Further information on the route-based operat-ing strategy (Y page 24).


On-board

computerand

displays

Z

Electric operation mode

The electric motor powers the vehicle. The high-voltage battery supplies energy to the electricmotor.The arrows for the energy flow are shown ingreen.

Electric operation mode and charging thehigh-voltage battery

The electric motor is operating as a generator,e.g. in overrun mode and when braking. Thekinetic energy of the vehicle is converted intoelectrical energy. The high-voltage battery isbeing charged.The arrows for the energy flow are shown ingreen.

Charging the high-voltage battery whenstationary

The engine and electric motor are switched off.The arrows for the energy flow are not shown.Further information on charging the high-volt-age battery via:Ra mains socket (Y page 31)Ra charging station (Y page 35)Ra wallbox (Y page 34)

Displaying the current fuel consump-tion

The menu displays the current fuel consump-tion.X Press the= or; button on the steeringwheel to select the Trip menu.

X Confirm by pressinga on the steeringwheel.

X Press the: or9 button to select thedisplay with the current fuel consumption.

You can also display the fuel consumption val-ues and the electrical energy generated in themultimedia system display. The multimedia sys-tem shows the values from the last 15 minutesin a bar graph (Y page 50).


-board

computerand

displays

Displaying ranges

The approximate range is based on the currentdriving style.X Press the= or; button on the steeringwheel to select the Trip menu.

X Confirm by pressinga on the steeringwheel.The approximate total range that can be cov-ered is calculated according to your currentdriving style and the amount of fuel in thetank. If there is only a small amount of fuel leftin the fuel tank, a vehicle with a fuel pumpC appears instead of the total range.If the condition of charge of the high-voltagebattery is low, a vehicle with a charging cableappears instead of the electric range.

X Press: or9 to select the approximatetotal range and electrical range.

Trip computer "From Start" or "FromReset"

: Distance; Driving time= Average speed? Trip distance in electric modeA Average fuel consumptionX Press the= or; button on the steeringwheel to select the Trip menu.

X Press the9 or: button to selectFrom Start or From Reset.

You can find further information in the vehicleOperator's Manual.

Service menuObserve the notes on coolant temperature inthe vehicle Operator's Manual.X Press the= or; button on the steeringwheel to select the Settings menu.

X Press the: or9 button to select theServ. submenu.X Confirm by pressinga on the steeringwheel.

X Press the: or9 button to select theCoolant submenu.X Pressa to confirm your selection.The coolant temperature is shown in a bardisplay.

Settings menu

HYBRID submenu

Setting the maximum charge currentUsing the Maximum Charge Current: function,you can limit the charge current value at whichthe high-voltage battery should be charged.Before starting the charging process at a powersocket, check the maximum permissible chargecurrent for the relevant power socket or thebuilding.Only set the maximum permissible charge cur-rent using the function if:Rit is not possible to set the charge current onthe charging cableRthe precise maximum permitted charge cur-rent can only be set via the on-board com-puter

Before charging the high-voltage battery at awallbox or charging station, ensure that thecharging current is not limited by the function. Ifcharging at a wallbox or a charging station,select the maximum value.Further information on charging the high-volt-age battery and setting the charge current(PLUG-IN HYBRID vehicles) (Y page 30).


On-board

computerand

displays

Z

X Press the= or; button on the steeringwheel to select the Settings menu.

X Press the: or9 button to select theHybrid submenu.X Confirm by pressinga on the steeringwheel.

X Press the: or9 button to select theMaximum Charge Current: function.You will see the selected setting.

X Press thea button to save the setting.Themaximumcharge current values in the on-board computer may deviate from the charg-ing cable values.

Further information on charging the high-volt-age battery (PLUG-IN HYBRID vehicles)(Y page 30).

Setting the departure timeYou can climatize the vehicle interior prior toyour departure with the "Set departure time"function. Further information on pre-entry cli-mate control (Y page 18).If you recharge the high-voltage battery, thefunction also displays the charging prediction.X Press the= or; button on the steeringwheel to select the Settings menu.

X Press the: or9 button to select theHybrid submenu.X Confirm by pressinga on the steeringwheel.

X Press the: or9 button to select theDeparture Time: function.You will see the selected setting.

X To set no departure time: press the: or9 button to select No Preselection.

X Pressa to confirm.If you recharge the high-voltage battery, themultifunction display also shows the time

when the high-voltage battery will be fullycharged.

orX To set a departure time: press: or9A, B or C to select the desired preset.

X Press thea button to confirm the selec-tion.

X Press: or9 to set the hours.X Pressa to confirm.X Press: or9 to set the minutes.X Pressa to confirm.If you recharge the high-voltage battery, themultifunction display shows the expectedcondition of charge of the high-voltage bat-tery for the departure time set.

Further information on charging the high-volt-age battery (PLUG-IN HYBRID vehicles)(Y page 30).

Instrument cluster submenu

Selecting permanent displayThe Permanent Display: function allows youto choose whether the multifunction displayalways shows the outside temperature or thespeed.The speed display is inverse to the speedome-ter.X Press the= or; button on the steeringwheel to select the Settings menu.

X Press the: or9 button to select theInstrument Cluster submenu.X Confirm by pressinga on the steeringwheel.

X Press the: or9 button to select thePermanent Display: function.The current setting, Outside Temperature,Speedometer [km/h] or Speedometer[mph] appears.

X To change the setting: pressa again.


-board

computerand

displays

Display messages

Hybrid drive system

Display messages Possible causes/consequences andM Solutions

dVehicle OperationalSwitch the IgnitionOff Before Exiting

You are exiting the vehicle when it is in a ready-to-drive state. TheREADY indicator in themultifunction display is on. A warning tone alsosounds.If you leave the vehicle:X Safeguard the vehicle against rolling away (see the vehicle Opera-tor's Manual).

X Switch off the ignition and remove the SmartKey.If you do not leave the vehicle:X Switch off the electrical consumers, e.g. automatic climate control,seat heating.

Please note the following: the electrical consumers are supplied by the12 V battery. If the vehicle is left in a ready-to-drive state for an exten-ded period, it will switch off once the 12 V battery is almost empty. Itwill then only be possible to start the vehicle using a second battery(jump-starting).

Change the currentdrive programbefore changing theoperatingmode.orExit manualdrive program Mbefore changing theoperating mode

You have attempted to change the operating mode when in automaticdrive program Sport, Individual (with activated Sport characteristics)or manual drive program M.X Select the Comfort, Slippery or Individual (with activatedComfort orEco characteristics) drive program (Y page 22).

X Select the preferred operating modeHYBRID, E-MODE, E-SAVE orCHARGE (Y page 21).

E-MODE CurrentlyUnavailableThe condition of charge of the high-voltage battery has dropped to thelower limit and the E-MODE operating mode has been switched off.Driving with the internal combustion engine is activated and the oper-ating mode switches to the basic HYBRID setting.X Continue driving using the internal combustion engine.You can switch to the E-SAVE or CHARGE operating mode asrequired (Y page 21).If you select CHARGE, the high-voltage battery is charged.Once the charge level display for the high-voltage battery hasincreased slightly, you can switch to the E-MODE operating modeagain.

Only E-MODE Availa‐ble Power LimitedRefuel ImmediatelyThe fuel tank has been run dry and the combustion engine has beenswitched off.A warning tone also sounds.The vehicle will be powered by electrical energy only. Performance isrestricted and the vehicle may accelerate more slowly than normal.X Refuel at the nearest gas station without fail.In the "Total range and electric range" menu, you can display theapproximate range of the vehicle (Y page 43).

Display messages 45

On-board

computerand

displays

Z


Without startingengine again, con‐sult workshopYou cannot start the engine again due to a malfunction.A warning tone also sounds.If the engine is running:X Visit a qualified specialist workshop.If you switch off the engine:X Safeguard the vehicle against rolling away (see the vehicle Opera-tor's Manual).

X Notify a qualified specialist workshop or breakdown service.

áTowing Not Permit‐ted See Operator'sManual

The hybrid drive system is malfunctioning.X Have the vehicle transported on a transporter or trailer to the near-est qualified specialist workshop.

ÛStörung Werkstattaufsuchen(MalfunctionVisit workshop)

The hybrid drive system is malfunctioning.X Visit a qualified specialist workshop.

ÛMalfunction

The hybrid drive system is malfunctioning.X Have the vehicle towed away by a professional recovery company tothe nearest qualified specialist workshop.

dMalfunction

The drive system is malfunctioning.The ECO start/stop function may have failed.The drive power is restricted.X Visit a qualified specialist workshop.

ïCharger Cable Con‐nected

The charging cable connector is connected to the vehicle socket.You cannot drive off as long as the charging cable connector is stillconnected.Before you drive off:X Remove the charging cable connector from the vehicle socket(Y page 34).

6Please WaitDepressurizing Tank

The fuel filler flap unlocking button has been pulled. The fuel tankmustbe depressurized before refueling.X Wait until the fuel tank is depressurized and the fuel filler flap isunlocked.The opening process for the fuel filler cap may take up to 15minutes.

6Tank is Depressur‐ized Ready for Refu‐eling

The fuel tank is now depressurized. The vehicle may now be refueled.X Observe the information on refueling on the fuel filler flap.X Open the fuel filler cap and remove it (Y page 27).

46 Display messagesOn

-board

computerand

displays


6Tank VentilationMalfunction ServiceRequired

The fuel system is malfunctioning.X Visit a qualified specialist workshop.

ãAcoustic VehicleIndication Inopera‐tive

The sound generator is not working. The vehicle can still be driven;however, no vehicle sounds can be generated. As a result, your vehiclemay not be heard by other road users until it is very close to them, orit may not be heard at all.X Drivewith particular care, allowing for the possibility that other roadusers may behave unpredictably.

X Visit a qualified specialist workshop.

Engine


#See Operator's Man‐ual

The battery is not being charged.A warning tone also sounds.Possible causes are:Ra defective alternatorRfaulty power electronicsRa torn poly-V-beltRa malfunction in the electronics

! Do not continue driving. The engine could otherwise overheat.X Pull over and stop the vehicle safely and switch off the engine, pay-ing attention to road and traffic conditions.

X Safeguard the vehicle against rolling away (see the vehicle Opera-tor's Manual).


Display messages 47

On-board

computerand

displays

Z

Vehicle

Display messages Possible causes/consequences and M Solutions

Auxiliary BatteryMalfunction The auxiliary battery for the automatic transmission is no longer beingcharged.X Visit a qualified specialist workshop.X Until then, set the automatic transmission to position P before youswitch off the engine.

X Before leaving the vehicle, apply the electric parking brake.

&Pre-Entry ClimateCtrl. (Via Smart‐Key) AvailableAgain After EngineStart

With the engine switched off, you have attempted to switch on the pre-entry climate control more than twice.X Let the engine run for ten seconds.After running the engine, the pre-entry climate control is opera-tional again.

&Pre-Entry ClimateCtrl. (Via Smart‐Key) Inoperative HVBattery Low

The on-board voltage is too low. The pre-entry climate control cannotbe switched on.X Drive for a longer distance.The battery is being charged. When the condition of charge of thehigh-voltage battery is over the specified minimum, pre-entry cli-mate control is operational again.

Warning and indicator lamps in the instrument cluster

Safety systemsThe information "while the engine is running" given in the vehicle Operator's Manual regarding thesignaling behavior of a warning/indicator lamp corresponds to the READY driving status. When awarning/indicator lamp lights up in the READY driving status with the corresponding information,the causes/consequences and solutions given in the vehicle Operator's Manual also apply to yourvehicle.

48 Warning and indicator lamps in the instrument clusterOn

-board

computera

nddisplays

Warning/indicatorlamp

N Signal typePossible causes/consequences andM Solutions

J$ N$ (USA only),J (Canada only): the red brake system warning lamp isshown in the READY driving status.A warning tone also sounds.

G WARNINGRBS is malfunctioning. Pedal travel may be longer than usual and braking per-formance may be affected.There is a risk of an accident.X Pull over and stop the vehicle safely as soon as possible, paying attention to roadand traffic conditions. Do not continue driving under any circumstances.

X Safeguard the vehicle against rolling away (see the vehicle Operator's Manual).X Consult a qualified specialist workshop.X Observe the additional display messages in the multifunction display.

é N The yellow RBS (Recuperative Brake System) warning lamp is on in drivingcondition READY.A warning tone also sounds.

G WARNINGRBS is malfunctioning. Pedal travel may be longer than usual and braking per-formance may be affected.There is a risk of an accident.X If the multifunction display shows a display message, please observe this.X Drive on carefully.X Visit a qualified specialist workshop immediately.

Warning and indicator lamps in the instrument cluster 49

On-board

computera

nddisplays

Z


Observe the amended notes on operating safetyof the multimedia system in the vehicle's Oper-ator's Manual

G WARNINGIf you operate information systems and com-munication equipment integrated in the vehi-cle while driving, you will be distracted fromtraffic conditions. You could also lose controlof the vehicle. There is a risk of an accident.Only operate the equipment when the trafficsituation permits. If you are not sure that thisis possible, park the vehicle paying attentionto traffic conditions and operate the equip-ment when the vehicle is stationary.

Youmust observe the legal requirements for thecountry in which you are currently driving whenoperating the multimedia system.Information on operating themultimedia systemcan be found in the vehicle's Operator'sManual.

Vehicle menu

Menu overviewThe vehicle menu of the multimedia system isadded to or changed for the hybrid operation onthe following displays:REnergy flow display (Y page 50)RFuel consumption display and the generatedelectrical energy (Y page 50)

Open the vehicle menu with theØ button onthe multimedia system.Further possibilities for calling up the menu canbe found in the vehicle's Operator's Manual.

Energy flow displayX Press theØ button on the multimedia sys-tem.The vehicle menu is displayed.

X To select Energy Flow: turn and press thecontroller.The energy flow is displayed.

X Toexit the display: press the% button onthe controller.

The current energy flow in the hybrid drive sys-tem can also be displayed in the multifunctiondisplay (Y page 40).

Displaying fuel consumption and gen-erated electricity

: Fuel consumption; Electrical energy generatedEvery bar of the graph displays the averagevalue for one minute.Fuel consumption indicator: may differ fromthe indicator in the From Start trip computer inthe Trip menu.To reset values: the values are reset along withthe From Start trip computer (Y page 43).X To select Consumption: turn and press thecontroller.The display of the multimedia system showsfuel consumption: and electrical energygenerated; for the past 15 minutes of driv-ing.

50 Vehicle menuMultim

ediasystem

Engine compartment

Checking coolant levelObserve the notes on checking and adding cool-ant in the vehicle Operator's Manual.The second coolant expansion tank in your vehi-cle's engine compartment must not be filled.

Engine compartment 51

Maintenance

andcare

Battery (vehicle)

Important safety notesYour vehicle is equipped with a 12 V battery anda high-voltage battery.For the 12 V battery, observe the notes under"Battery (vehicle)" in the vehicle Operator'sManual.


G WARNINGIn the event of a vehicle fire, the internal pres-sure of the high-voltage battery can exceed acritical value. In this case flammable gasescapes through a ventilation valve on theunderbody. The gas can ignite. There is a riskof injury.Leave the danger zone immediately. Securethe danger area at a suitable distance, whilstobserving legal requirements.

G WARNINGIf the housing of the high-voltage battery hasbeen damaged, electrolyte and gases mayleak out. These are poisonous and caustic.There is a risk of injury.Avoid contact with skin, eyes or clothing.Immediately rinse electrolyte splashes offwith water and seek medical attentionstraight away.

! Exhaustive discharge caused by the vehiclestanding idle for lengthy periods can damage

the high-voltage battery. If the vehicle is idlefor lengthy periods leave the high-voltage bat-tery connected to a charging station.

If the battery charge is sufficient, the high-volt-age battery can also supply the 12V batterywithenergy. This happens only if the battery chargeof the 12 V battery requires this, e.g. after usingelectrical consumers for an extended periodwith the engine switched off. As the on-boardvoltage is continuously monitored this can alsobe performed when the engine is switched off.The battery charge of the 12 V battery and theon-board voltage are thereby kept stable forlonger.Consult an authorized Mercedes-Benz Center ifyou wish to leave your vehicle parked for a longperiod of time.

Charging the high-voltage batterywhile the vehicle is stationary

G WARNINGCombustion engines emit poisonous exhaustgases such as carbon monoxide. Inhalingthese exhaust gases leads to poisoning. Thereis a risk of fatal injury. Therefore never leavethe engine running in enclosed spaces with-out sufficient ventilation.

! Only charge the high-voltage battery in the"Charging when stationary" mode. Do notconnect any battery chargers to the high-volt-age battery. This could damage the vehicle’shigh-voltage electrical system.

X Bring the vehicle to a stop with the enginerunning.The engine powers the electric motor. Theelectric motor operates as a generator. Thehigh-voltage battery is being charged.

If the high-voltage battery has been dischargedexcessively, charge the high-voltage battery toat least 60%. In "Charging while stationary"mode, you can monitor the condition of chargeof the high-voltage battery up to a maximum of70% in the COMAND display and the multifunc-tion display (Y page 40).

52 Battery (vehicle)Breakdow

nassistance

Jump-starting

Observe the notes on jump-starting in the vehi-cle Operator's Manual.If your vehicle has been jump-started, the elec-tric drive may not be available for approximately30 minutes.Jump-starting is not considered to be a normaloperating condition.Jumper cables and further information regardingjump-starting can be obtained at any qualifiedspecialist workshop.

Towing

Important safety notesObserve the notes on towing away and trans-porting in the vehicle Operator's Manual.Towing the vehicle with the rear axle raised ortransporting the vehicle should be carried outonly by professional recovery companies. It isbetter to have the vehicle transported than tohave it towed away.In the following cases, the vehicle must not betowed but be transported instead:RThe multifunction display is not working.RTheá Towing Not Permitted SeeOperator's Manual message is shown inthe multifunction display.

If the vehicle is in a dangerous area, it can betowed out of that area with both axles on theground. In this case, the towing distance mustnot be greater than 165 ft (50 m) and must notexceed a towing speed of 6 mph (10 km/h). Forlonger distances, have the vehicle loaded andtransported.

Towing 53

Breakdow

nassistance

Z

Filling capacities

Observe the notes on service products in thevehicle Operator's Manual.

Capacity

Fuel tank content 21.1 US gal(80.0 l)

Fuel, of which reserve fuel Approx.3.2 US gal(12.0 l)

Engine oil capacityincluding oil filter

7.4 US qt (7.0 l)

Coolant Approx.10.3 US qt (9.7 l)

Refrigerant 37.0 ± 0.4 oz(1050 ± 10 g)

PAG oil 3.9 ± 0.4 oz(110 ± 10 g)

Vehicle data

General notesPlease note that for the specified vehicle data:Rthe heights specified may vary as a result of:

- Tires- Load- Condition of the suspension- Optional equipmentRoptional equipment reduces the maximumpayload.

Observe the information relating to level control(see the vehicle Operator's Manual).

Dimensions and weights

GLE 550 e4MATIC

:Openingheight

;Max.

headroom

Steel suspen-sion

86.4 in2195 mm

78.2 in1987 mm

AIRMATICpackage

84.3 in -87.2 in

2140 mm -2215 mm

76.0 in -79.0 in

1931 mm -2006 mm

ON&OFFROADpackage

84.3 in -88.4 in

2140 mm -2245 mm

76.0 in -80.2 in

1931 mm -2036 mm

Missing values were not available at time ofgoing to print.

GLE 550 e 4MATIC

Vehicle length 189.7 in(4819 mm)

Vehicle width includingexterior mirrors

84.3 in(2141 mm)

Maximum vehicle height(steel suspension)

70.7 in(1796 mm)

Maximum vehicle height(AIRMATIC package)

71.6 in(1818 mm)

Maximum vehicle height(ON&OFFROAD package)

72.8 in(1848 mm)

Minimum vehicle height 69.2 in(1758 mm)

54 Vehicle dataTechnicaldata

GLE 550 e 4MATIC

Wheelbase 114.8 in(2915 mm)

Maximum ground clear-ance (steel suspension)

8.0 in(202 mm)

Maximum ground clear-ance (AIRMATIC package)

10.0 in(255 mm)

Maximum ground clear-ance (ON&OFFROAD pack-age)

11.2 in(285 mm)

Minimum ground clear-ance

7.1 in(180 mm)

Turning radius 38.7 ft(11.80 m)

Maximum roof load 220 lb(100 kg)

Permissible trailer load,braked at a minimum gradi-ent-climbing capability of 12%from a standstill

4410 lbs(2000 kg)

Maximum drawbar nose-weight, the drawbar nose-weight is not included in thetrailer load

355 lbs(160 kg)

Gross rear axle weight rat-ing when towing a trailer

3704 lbs(1680 kg)

Mounting dimensions! If you have a trailer tow hitch retrofitted,changes to the cooling system and drive trainmay be necessary, depending on the vehicletype.If you have a trailer tow hitch retrofitted,observe the anchorage points on the chassisframe.

: Anchorage points for the trailer tow hitch; Rear axle center line

Ball position of the ball coupling

When choosing a ball coupling, the dimensionsstated in the illustration must not be exceeded.

High-voltage batteryMissing values were not available at time ofgoing to print.

GLE 500 e 4MATIC

Model

Energy content

Nominal capacity

Range in electric-onlymode (according to NEDC)

Vehicle data 55

Technicaldata

GLE 500 e 4MATIC

Charging timeat16 A(using a chargingstation or wallbox)

Charging time at8 A(usinga mains socket)

56 Vehicle dataTechnicaldata

gle - mercedes-benz usa · 2020-03-26 · gle plug-inhybridsupplement orderno.p166019513...

Documents