glass-glass module clip mk-a hr ii type · pdf file our successful module clip for frame-less...
TRANSCRIPT
www.jurchen-technology.com
Our successful module clip for frame-less glass-glass pv panels has been re-
engineered. The module clip MK-A HR II is the result of our manufacturing
know-how in close cooperation with multiple module manufacturers and so-
lar EPCs. The Smart Product Design enables a manufacturing with less raw
materials. As a result the MK-A HR II module clip is up to 35% lighter than
competitive products.
Smart installation - fast with no risks for damaged pv modules: An
additional assembly protection is given by the extended lower EPDM rubber
lip. During the 2-step installation process the PV modules will be set directly
on the rubber and slide into the pre-mounted clip. There is no contact with the
metal substructure.
Positive locking in contrast to force closure: The central connection point
(customized for different screws) and the protection bar below avoid a damage
through too high torques.
Proven millionfold with lowest fault rate* -In operation worldwide under extreme conditions
2
1 The extended lower special developed EPDM rubber lip
guarantees an easy and secure installation.
Practical protection bar avoids extreme torsional moments and
ensures the required clamping force permanently.
Benefits of MK-A HR II
New Product Design: Up to 35 % less weight
Smart and fast installation: EPDM rubber avoids installation
damages and ensures a secure hold with positive locking
Proven rock solid quality with 15 years product guarantee
Practical end stop to prevent glass module damages
Ready for 1,500V DC system voltage!
PV performance is optimized by shade-free screw connection
Compatible with many frame-less glass-glass pv modules;
certified by First Solar®
Optional anti-theft system
Attractive pricing
Glass-Glass Module clip MK-A HR II TYPE FS4
21
NEWFirst S
olar® FS4
clip rev. II
All data may subject to alterations and errors.
Be smart - use less raw material!
Rock solid quality - Made in Germany: The MK-A HR II module clip is
manufactured according to our strict quality management process. Jurchen Tech-
nology gives a 15 years product guarantee for it. The MK-A HR II provides a safe,
manufacturer certified hold of the First Solar® FS 4 pv module series.
* Operating experience of over 2.2 GWp PV capacity with fault rate lower than 0.05% per year (Source: First Solar)
SMART INSTALLATION WITH LESS MECHANICAL PARTS
LESS MATERIAL USAGE
PROVEN QUALITY IN OVER 2.2 GWp PV CAPACITY
Bestellhotline:(09369) 98229 - 660
Änderungen & Irrtümer vorbehalten.
2016-03-10_DE
1
A4Status Änderungen Datum Name
Gezeichnet
Kontrolliert
Norm
Datum Name
09.03.2016 hermann.hasemann
33,5
80- 20+
18
14
Ø 9
402
/ 7
1
A4Status Änderungen Datum Name
Gezeichnet
Kontrolliert
Norm
Datum Name
09.03.2016 hermann.hasemann
33,5
80- 20+
1814
Ø 9
402
/ 7
TEILELISTEWERKSTOFFBESCHREIBUNGBAUTEILNUMMERANZAHLOBJEKT
EN AW 6060 T66Modulklammer MK A II - HRA-0017-01.03.00.111EPDMEPDM First Solar 4 HRR-0007-0022
1 A4
Modulklammer MK A II - HR
C-0073-01Status Änderungen Datum Name
Gezeichnet
Kontrolliert
Norm
Datum Name06.05.2015 Hasemann
Allgemein-toleranz DIN ISO
2768-mK
Diese Zeichnung darf ohne Genehmigung weder vervielfältigt noch dritten Personen oder Kokurrenzfirmenzugänglich gemacht werden
OberflächenDIN EN ISO
1302
M1:1
80- 20+
402,0
50
18
14
50
9/ 7
22
TEILELISTEWERKSTOFFBESCHREIBUNGBAUTEILNUMMERANZAHLOBJEKT
EN AW 6060 T66Modulklammer MK A II - HRA-0017-01.03.00.111EPDMEPDM First Solar 4 HRR-0007-0022
1 A4
Modulklammer MK A II - HR
C-0073-01Status Änderungen Datum Name
Gezeichnet
Kontrolliert
Norm
Datum Name06.05.2015 Hasemann
Allgemein-toleranz DIN ISO
2768-mK
Diese Zeichnung darf ohne Genehmigung weder vervielfältigt noch dritten Personen oder Kokurrenzfirmenzugänglich gemacht werden
OberflächenDIN EN ISO
1302
M1:1
80- 20+
402,0
50
18
14
50
9/ 7
22
Module clip MK-A II HR MK-A HR II 80-7 FS4Item number: 06006607
MK-A HR II 80-9 FS4Item number: 06006667
Hole diameter Ø suitable for M6 M8Available length of the module clip* 80 mm
length tolerance DIN ISO 2768-1 +/- 1.5 mm80 mmlength tolerance DIN ISO 2768-1 +/- 1.5 mm
Possible module types First Solar® module series FS 2, FS 3 and FS 4 First Solar® module series FS 2, FS 3 and FS 4
Utilizable for the following laminate thickness 6.8 mm (± 0.1 mm) 6.8 mm (± 0.1 mm)
Main casting material Aluminum, weatherproof Aluminum, weatherproof
Insert material EPDM, UV-resistant and weatherproofelectrical resistance > 1 x 1014 Ohm * cm
EPDM, UV-resistant and weatherproofelectrical resistance > 1 x 1014 Ohm * cm
Shore hardness 55 Shore A ± 5 in the mounting area 55 Shore A ± 5 in the mounting area
Minimum support area ≥ 37 mm ≥ 37 mm
Usable as an edge clip without additional components
Yes Yes
Optional anti-theft system Yes Yes
Advanced protection bar for load spreading Yes Yes
Technical Data for MK-A HR II TYPE FS4
Cross section MK-A HR II M (module middle clip):
* Individual length possible accordingly
Optional: Cross section MK-A HR E (module end clip):
Hotline for orders:+49 9321 2680 600
All data may subject to alterations and errors.
2017-01-13_EN
Jurchen Technology GmbH
Steigweg 24, 97318 Kitzingen, Germany