Original EWM welding torches are consistently focused on putting a torch in your hand which enables you to use and implement your ability in every situation. Whether for MIG/MAG, TIG or plasma welding, EWM torches captivate with their optimum balancing and their ergonomic style. They also make fatigue-free working possible for longer working phases without great effort. The combination of the design and the flexible hose package from EWM ma-kes welding effortless, even in areas that are difficult to access and where little room is available.

Welding torch

Attention! New prices as of 01.05.2011

EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torch

Overview

Welding torch Page

MIG/MAG welding torch

gas cooled

MT220 26Replacement parts sets 30MT300 31Replacement parts sets 35MT400 36Replacement parts sets 38

water cooled

MT450 39Replacement parts sets 41MT550 42Replacement parts sets 46

MIG/MAG welding torch replacement parts

Gas nozzlesMT series 47MIG series 49

Contact tips MT series5153

Nozzle holdersMT series 55MIG series 57

Gas distributorMT series 59MIG series 60

Wire spiral guides Insulated 61

PA and teflon coresCombined wire cores 62Material sold by the metre 65

Accessories 66

23

The gas and water-cooled MIG/MAG welding torches are part of our integrated system. They are coordinated with all other EWM components, and this combination ensures that the full performance capability of the power sources goes into the welding process.

Extreme robustness and durability reduce wear and the cost of spare parts. The separate shielding gas guide also reduces gas losses to a considerable extent, reducing consumption and avoiding process problems. Lifecycle costs are compa-ratively low, which makes for rapid amortisation.

u All EWM-MT torches are equipped with gas nozzle, flow nozzle, nozzle holder and wire guide core ready to weld!

Attention! New prices as of 01.05.2011

Welding torches MIG/MAG welding torches

The advantage of quality

Quick amortisation due to low life cycle costs

Extreme robustness and durability reduce wear and the cost of spare parts. The flow nozzles, which are manufactured from low-wear zirconium copper, contribute to this. Screw-on and nickel-plated gas nozzles ensure a secure fit, the best heat dissipation and low spatter adhesion. The separate gas supply makes minimum gas loss possible.

Long service life

EMW torches can be operated for a very long time without interruption. The excellent cooling reduces wear considerably, clearly reduces the downtime and set up time and also leads to errors being avoided.

Function torch - perfect operation on site

The functionality of our torches leaves nothing to be desired. You select the wire speed, enter programme and jobs (welding tasks) and have these displayed. All EWM welding torches have torch and function buttons with high-grade micro switches.

Fatigue-free working with the least effort

Ergonomically-formed grip plates and optimum balancing make fatigue-free working with minimum effort possible over a longer period of time.

Minimising process faults

Adequate cooling is ensured with EWM torches. A separate gas supply prevents oxygen being sucked in. In addition an excellent gas cover and a transfer free wire guide from the central connection to the current contact nozzle prevent possible process problems.

MT seriesHighlights

Attention! New prices as of 01.05.2011

Welding torchesMIG/MAG welding torches

Function torch 1 UP/Down

With the Up/Down remote control function you can com-fortably adapt the wire speed to your task while welding or during the welding break. It is possible to select a programme depending on the machine.

Function torch 2 UP/Down

Along with the wire speed you can also correct or set the welding voltage with this operating variant. Programme and job selection are also possible depending on the machine type.

Function torch Powercontrol 1

In addition to the UP/Down variant the Powercontrol has a display so you can view all the changes undertaken straight away. An invaluable benefit if you can no longer see the display on the case or on the machine while welding in dif-ficult positions.

Function torch Powercontrol 2

This variant provides the highest level of comfort - com-plete access to all settings and display of all important parameters directly on the torch. You can change the wire speed, voltage correction, programmes and jobs with a glance at the three-digit LED display.

Welding torch with replaceable neck

Put the torch neck with three different bend radii into the optimum welding position. In this way you will not only reach each welding point without difficulty. The replaceable neck also frees the guide hand. You can concentrate on your welding task for longer.

EWM fume extraction torches

replace suction arms and tube systems and extract the fumes at exactly the point where they develop. They provide a high degree of flexibility with a compact structure at the same time. The special geometry of the extraction nozzle prevents any swirling or extraction of the shielding gas.

Function torch

Attention! New prices as of 01.05.2011

26 EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchMIG/MAG welding torch

gas cooled MT220

MT220G z Gas-cooled MIG/MAG welding torch

Duty cycle CO2 250 A / 60 %Duty cycle M21 220 A / 60 %Duty cycle M21 pulse 150 A / 60 %Wire Ø mm 0.8 - 1.2Gas flow l/min 10 - 20Connection Euro central

Type Designation Length Item no. P Pricem per pc.

MT220G EZA MIG/MAG welding torch, gas-cooled3 094-500018-00000 B1 € 205.004 094-500018-00004 B1 € 225.005 094-500018-00005 B1 € 245.00

MT220G U/D z Gas-cooled MIG/MAG function torch z Setting the wire feed speed z For alpha Q, Phoenix and Taurus z With alpha Q and also Phoenix Progress and Expert, programmes can also be optionally

selected

Duty cycle CO2 250 A / 60 %Duty cycle M21 220 A / 60 %Duty cycle M21 pulse 150 A / 60 %Wire Ø mm 0.8 - 1.2Gas flow l/min 10 - 20Connection Euro central, 19-pole

Type Designation Length Item no. P Pricem per pc.

MT220G U/D EZA MIG/MAG welding torch, 1x up/down, gas-cooled3 094-500018-00200 B1 € 265.004 094-500018-00204 B1 € 285.005 094-500018-00205 B1 € 305.00

MT220G 2 U/D z Gas-cooled MIG/MAG function torch z Setting wire-feed speed and welding voltage or correcting the voltage z For alpha Q, Phoenix and Taurus z With alpha Q, Phoenix Progress and Expert, programs and JOBs can also be optionally selected

Duty cycle CO2 250 A / 60 %Duty cycle M21 220 A / 60 %Duty cycle M21 pulse 150 A / 60 %Wire Ø mm 0.8 - 1.2Gas flow l/min 10 - 20Connection Euro central, 19-pole

Type Designation Length Item no. P Pricem per pc.

MT220G 2U/D EZA MIG/MAG welding torch, 2x up/down, gas-cooled3 094-500018-00300 B1 € 270.004 094-500018-00304 B1 € 290.005 094-500018-00305 B1 € 310.00

Attention! New prices as of 01.05.2011

27EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchMIG/MAG welding torch

MT220G PC1 z Gas-cooled MIG/MAG function torch z Display and setting wire feed speed or programs z For alpha Q, Phoenix Progress, Phoenix Expert

Duty cycle CO2 250 A / 60 %Duty cycle M21 220 A / 60 %Duty cycle M21 pulse 150 A / 60 %Wire Ø mm 0.8 - 1.2Gas flow l/min 10 - 20Connection Euro central, 19-pole

Type Designation Length Item no. P Pricem per pc.

MT220G PC1 EZA MIG/MAG welding torch, Powercontrol 1, gas-cooled3 094-500018-00400 B1 € 300.004 094-500018-00404 B1 € 320.005 094-500018-00405 B1 € 340.00

MT220G PC2 z Gas-cooled MIG/MAG function torch z Displays and adjusts wire feed speed and voltage correction or, optionally, programs and jobs

can be selected (the latter does not apply to Taurus BasicS) z For alpha Q, Phoenix Progress, Phoenix Expert

Duty cycle CO2 250 A / 60 %Duty cycle M21 220 A / 60 %Duty cycle M21 pulse 150 A / 60 %Wire Ø mm 0.8 - 1.2Gas flow l/min 10 - 20Connection Euro central, 19-pole

Type Designation Length Item no. P Pricem per pc.

MT220G PC2 EZA MIG/MAG welding torch, Powercontrol 2, gas-cooled3 094-500018-00700 B1 € 305.004 094-500018-00704 B1 € 325.005 094-500018-00705 B1 € 345.00

MT220CG z Gas-cooled MIG/MAG welding torch z Factory fitted with 45 °C replaceable neck

Duty cycle CO2 250 A / 60 %Duty cycle M21 220 A / 60 %Duty cycle M21 pulse 150 A / 60 %Wire Ø mm 0.8 - 1.2Gas flow l/min 10 - 20Connection Euro central

Type Designation Length Item no. P Pricem per pc.

MT220CG EZA MIG/MAG welding torch, gas-cooled3 094-500018-03000 B1 € 250.004 094-500018-03004 B1 € 270.005 094-500018-03005 B1 € 290.00

Attention! New prices as of 01.05.2011

28 EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchMIG/MAG welding torch

MT220CG U/D z Gas-cooled MIG/MAG function torch z Factory fitted with 45 °C replaceable neck z Setting the wire feed speed z For alpha Q, Phoenix and Taurus z With alpha Q and also Phoenix Progress and Expert, programmes can also be optionally

selected

Duty cycle CO2 250 A / 60 %Duty cycle M21 220 A / 60 %Duty cycle M21 pulse 150 A / 60 %Wire Ø mm 0.8 - 1.2Gas flow l/min 10 - 20Connection Euro central, 19-pole

Type Designation Length Item no. P Pricem per pc.

MT220CG U/D EZA MIG/MAG welding torch, 1x up/down, gas-cooled3 094-500018-03200 B1 € 305.004 094-500018-03204 B1 € 325.005 094-500018-03205 B1 € 345.00

MT220CG 2U/D z Gas-cooled MIG/MAG function torch z Factory fitted with 45 °C replaceable neck z Setting wire-feed speed and welding voltage or correcting the voltage z For alpha Q, Phoenix and Taurus z With alpha Q, Phoenix Progress and Expert, programs and JOBs can also be optionally selected

Duty cycle CO2 250 A / 60 %Duty cycle M21 220 A / 60 %Duty cycle M21 pulse 150 A / 60 %Wire Ø mm 0.8 - 1.2Gas flow l/min 10 - 20Connection Euro central, 19-pole

Type Designation Length Item no. P Pricem per pc.

MT220CG 2U/D EZA MIG/MAG welding torch, 2x up/down, gas-cooled3 094-500018-03300 B1 € 310.004 094-500018-03304 B1 € 330.005 094-500018-03305 B1 € 350.00

MT220CG PC1 z Gas-cooled MIG/MAG function torch z Factory fitted with 45 °C replaceable neck z Display and setting wire feed speed or programs z For alpha Q, Phoenix Progress, Phoenix Expert

Duty cycle CO2 250 A / 60 %Duty cycle M21 220 A / 60 %Duty cycle M21 pulse 150 A / 60 %Wire Ø mm 0.8 - 1.2Gas flow l/min 10 - 20Connection Euro central, 19-pole

Type Designation Length Item no. P Pricem per pc.

MT220CG PC1 EZA MIG/MAG welding torch, Powercontrol 1, gas-cooled3 094-500018-03400 B1 € 345.004 094-500018-03404 B1 € 365.005 094-500018-03405 B1 € 385.00

Attention! New prices as of 01.05.2011

29EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchMIG/MAG welding torch

MT220CG PC2 z Gas-cooled MIG/MAG function torch z Factory fitted with 45 °C replaceable neck z Displays and adjusts wire feed speed and voltage correction or, optionally, programs and jobs

can be selected (the latter does not apply to Taurus BasicS) z For alpha Q, Phoenix Progress, Phoenix Expert

Duty cycle CO2 250 A / 60 %Duty cycle M21 220 A / 60 %Duty cycle M21 pulse 150 A / 60 %Wire Ø mm 0.8 - 1.2Gas flow l/min 10 - 20Connection Euro central, 19-pole

Type Designation Length Item no. P Pricem per pc.

MT220CG PC2 EZA MIG/MAG welding torch, Powercontrol 2, gas-cooled3 094-500018-03700 B1 € 350.004 094-500018-03704 B1 € 370.005 094-500018-03705 B1 € 390.00

MT220CG 22/36/45 z Torch necks with different bend radii facilitate handling for welding less accessible areas. z Available with 22°, 36° and 45° bend radii

Type Designation Radius Item no. P Price° per pc.

MT220CG Torch neck22 094-013058-00000 B2 € 135.0036 094-013059-00000 B2 € 135.0045 094-013060-00000 B2 € 135.00

MT220GF z Gas-cooled MIG welding torch with fume extraction z Infinite air volume control z For operation with high-vacuum extraction systems

Duty cycle CO2 250 A / 60 %Duty cycle M21 220 A / 60 %Duty cycle M21 pulse 150 A / 60 %Wire Ø mm 0.8 - 1.2Gas flow l/min 10 - 20Connection Euro central

Type Designation Length Item no. P Pricem per pc.

MT220G F EZA MIG/MAG welding torch, gas-cooled, waste gas extraction3 094-500018-40000 B1 € 310.004 094-500018-40004 B1 € 330.005 094-500018-40005 B1 € 360.00

Attention! New prices as of 01.05.2011

30 EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchMIG/MAG welding torch

gas cooled Replacement parts sets

SRP MT220G ST/CR

Wire Ø mm 0.8 - 1.2Thread, contact tip M6

Contents

1 x 11 mm, 1 x 13 mm, 1 x 16 mm gas nozzle and nozzle holders 30 mm and 33 mm

Contact tips: 10 pcs at 0.8 mm, 10 pcs at 1.0 mm, 5 pcs at 0.9 mm

5 gas distributorswith guide spiral, combined PA core and torch key

Type Designation Length Item no. P Price

SRP MT220 ST/CR M6 Replaceable parts set, steel3 092-013427-20001 B2 € 162.004 092-013427-20002 B2 € 169.005 092-013427-20003 B2 € 175.00

SRP MT220 ALU

Wire Ø mm 0.8 - 1.2Thread, contact tip M6

Contents

1 x 11 mm, 1 x 13 mm, 1 x 16 mm gas nozzle and nozzle holders 30 mm and 33 mm

Contact tips: 5 pcs at 0.8 mm, 5 pcs at 1.2 mm, 10 pcs at 1.0 mm

5 gas distributorswith combined PA core and torch key

Type Designation Length Item no. P Price

SRP MT220 ALU M6 Replaceable parts set, aluminium3 092-013427-20004 B2 € 143.004 092-013427-20005 B2 € 149.005 092-013427-20006 B2 € 155.00

Attention! New prices as of 01.05.2011

31EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchMIG/MAG welding torch

gas cooled MT300

MT300G z Gas-cooled MIG/MAG welding torch

Duty cycle CO2 330 A / 60 %Duty cycle M21 300 A / 60 %Duty cycle M21 pulse 210 A / 60 %Wire Ø mm 0.8 - 1.2Gas flow l/min 10 - 20Connection Euro central

Type Designation Length Item no. P Pricem per pc.

MT300G EZA MIG/MAG welding torch, gas-cooled3 094-500019-00000 B1 € 235.004 094-500019-00004 B1 € 255.005 094-500019-00005 B1 € 275.00

MT300G U/D z Gas-cooled MIG/MAG function torch z Setting the wire feed speed z For alpha Q, Phoenix and Taurus z With alpha Q and also Phoenix Progress and Expert, programmes can also be optionally

selected

Duty cycle CO2 330 A / 60 %Duty cycle M21 300 A / 60 %Duty cycle M21 pulse 210 A / 60 %Wire Ø mm 0.8 - 1.2Gas flow l/min 10 - 20Connection Euro central, 19-pole

Type Designation Length Item no. P Pricem per pc.

MT300G U/D EZA MIG/MAG welding torch, 1x up/down, gas-cooled3 094-500019-00200 B1 € 295.004 094-500019-00204 B1 € 315.005 094-500019-00205 B1 € 335.00

MT300G 2U/D z Gas-cooled MIG/MAG function torch z Setting wire-feed speed and welding voltage or correcting the voltage z For alpha Q, Phoenix and Taurus z With alpha Q, Phoenix Progress and Expert, programs and JOBs can also be optionally selected

Duty cycle CO2 330 A / 60 %Duty cycle M21 300 A / 60 %Duty cycle M21 pulse 210 A / 60 %Wire Ø mm 0.8 - 1.2Gas flow l/min 10 - 20Connection Euro central, 19-pole

Type Designation Length Item no. P Pricem per pc.

MT300G 2U/D EZA MIG/MAG welding torch, 2x up/down, gas-cooled3 094-500019-00300 B1 € 300.004 094-500019-00304 B1 € 320.005 094-500019-00305 B1 € 340.00

Attention! New prices as of 01.05.2011

32 EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchMIG/MAG welding torch

MT300G PC1 z Gas-cooled MIG/MAG function torch z Display and setting wire feed speed or programs z For alpha Q, Phoenix Progress, Phoenix Expert

Duty cycle CO2 330 A / 60 %Duty cycle M21 300 A / 60 %Duty cycle M21 pulse 210 A / 60 %Wire Ø mm 0.8 - 1.2Gas flow l/min 10 - 20Connection Euro central, 19-pole

Type Designation Length Item no. P Pricem per pc.

MT300G PC1 EZA MIG/MAG welding torch, Powercontrol 1, gas-cooled3 094-500019-00400 B1 € 330.004 094-500019-00404 B1 € 350.005 094-500019-00405 B1 € 370.00

MT300G PC2 z Gas-cooled MIG/MAG function torch z Displays and adjusts wire feed speed and voltage correction or, optionally, programs and jobs

can be selected (the latter does not apply to Taurus BasicS) z For alpha Q, Phoenix Progress, Phoenix Expert

Duty cycle CO2 330 A / 60 %Duty cycle M21 300 A / 60 %Duty cycle M21 pulse 210 A / 60 %Wire Ø mm 0.8 - 1.2Gas flow l/min 10 - 20Connection Euro central, 19-pole

Type Designation Length Item no. P Pricem per pc.

MT300G PC2 EZA MIG/MAG welding torch, Powercontrol 2, gas-cooled3 094-500019-00700 B1 € 335.004 094-500019-00704 B1 € 355.005 094-500019-00705 B1 € 375.00

MT300CG z Gas-cooled MIG/MAG welding torch z Factory fitted with 45 °C replaceable neck

Duty cycle CO2 330 A / 60 %Duty cycle M21 300 A / 60 %Duty cycle M21 pulse 210 A / 60 %Wire Ø mm 0.8 - 1.2Gas flow l/min 10 - 20Connection Euro central

Type Designation Length Item no. P Pricem per pc.

MT300CG EZA MIG/MAG welding torch, gas-cooled, replaceable neck3 094-500019-03000 B1 € 280.004 094-500019-03004 B1 € 300.005 094-500019-03005 B1 € 320.00

Attention! New prices as of 01.05.2011

33EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchMIG/MAG welding torch

MT300CG U/D z Gas-cooled MIG/MAG function torch z Factory fitted with 45 °C replaceable neck z Setting the wire feed speed z For alpha Q, Phoenix and Taurus z With alpha Q and also Phoenix Progress and Expert, programmes can also be optionally

selected

Duty cycle CO2 330 A / 60 %Duty cycle M21 300 A / 60 %Duty cycle M21 pulse 210 A / 60 %Wire Ø mm 0.8 - 1.2Gas flow l/min 10 - 20Connection Euro central, 19-pole

Type Designation Length Item no. P Pricem per pc.

MT300CG U/D EZA MIG/MAG welding torch, 1x up/down, gas-cooled, replaceable neck3 094-500019-03200 B1 € 335.004 094-500019-03204 B1 € 355.005 094-500019-03205 B1 € 375.00

MT300CG 2U/D z Gas-cooled MIG/MAG function torch z Factory fitted with 45 °C replaceable neck z Setting wire-feed speed and welding voltage or correcting the voltage z For alpha Q, Phoenix and Taurus z With alpha Q, Phoenix Progress and Expert, programs and JOBs can also be optionally selected

Duty cycle CO2 330 A / 60 %Duty cycle M21 300 A / 60 %Duty cycle M21 pulse 210 A / 60 %Wire Ø mm 0.8 - 1.2Gas flow l/min 10 - 20Connection Euro central, 19-pole

Type Designation Length Item no. P Pricem per pc.

MT300CG 2U/D EZA MIG/MAG welding torch, 2x up/down, gas-cooled, replaceable neck3 094-500019-03300 B1 € 340.004 094-500019-03304 B1 € 360.005 094-500019-03305 B1 € 380.00

MT300CG PC1 z Gas-cooled MIG/MAG function torch z Factory fitted with 45 °C replaceable neck z Display and setting wire feed speed or programs z For alpha Q, Phoenix Progress, Phoenix Expert

Duty cycle CO2 330 A / 60 %Duty cycle M21 300 A / 60 %Duty cycle M21 pulse 210 A / 60 %Wire Ø mm 0.8 - 1.2Gas flow l 20Connection Euro central, 19-pole

Type Designation Length Item no. P Pricem per pc.

MT300CG PC1 EZA MIG/MAG welding torch, Powercontrol 1, gas-cooled, replaceable neck3 094-500019-03400 B1 € 375.004 094-500019-03404 B1 € 395.005 094-500019-03405 B1 € 415.00

Attention! New prices as of 01.05.2011

34 EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchMIG/MAG welding torch

MT300CG PC2 z Gas-cooled MIG/MAG function torch z Factory fitted with 45 °C replaceable neck z Displays and adjusts wire feed speed and voltage correction or, optionally, programs and jobs

can be selected (the latter does not apply to Taurus BasicS) z For alpha Q, Phoenix Progress, Phoenix Expert

Duty cycle CO2 330 A / 60 %Duty cycle M21 300 A / 60 %Duty cycle M21 pulse 210 A / 60 %Wire Ø mm 0.8 - 1.2Gas flow l/min 10 - 20Connection Euro central, 19-pole

Type Designation Length Item no. P Pricem per pc.

MT300CG PC2 EZA MIG/MAG welding torch, Powercontrol 2, gas-cooled3 094-500019-03700 B1 € 380.004 094-500019-03704 B1 € 400.005 094-500019-03705 B1 € 420.00

MT300CG 22/36/45 z Torch necks with different bend radii facilitate handling for welding less accessible areas. z Available with 22°, 36° and 45° bend radii

Type Designation Radius Item no. P Price° per pc.

MT300CG Torch neck22 094-013102-00000 B2 € 119.0036 094-013103-00000 B2 € 119.0045 094-013104-00000 B2 € 119.00

MT300GF z Gas-cooled MIG welding torch with fume extraction z Infinite air volume control z For operation with high-vacuum extraction systems

Duty cycle CO2 330 A / 60 %Duty cycle M21 300 A / 60 %Duty cycle M21 pulse 210 A / 60 %Wire Ø mm 0.8 - 1.2Gas flow l/min 10 - 20Connection Euro central

Type Designation Length Item no. P Pricem per pc.

MT300G F EZA MIG/MAG welding torch, gas-cooled, waste gas extraction3 094-500019-40000 B1 € 340.004 094-500019-40004 B1 € 360.005 094-500019-40005 B1 € 380.00

Attention! New prices as of 01.05.2011

35EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchMIG/MAG welding torch

gas cooled Replacement parts sets

SRP MT300G/450W ST/CR

Wire Ø mm 0.8 - 1.2

Contents

1 x 13 mm, 1 x 15 mm, 1 x 18 mm gas nozzle and nozzle holders 40 mm and 43 mm

Contact tips: 10 pcs at 1.0 mm, 10 pcs at 1.2 mm, 5 pcs at 0.8 mm

5 gas distributorswith guide spiral, combined PA core and torch key

Type Designation Thread, contact tip Length Item no. P Price

SRP MT300/450 ST/CR M9

Replaceable parts set, steel

M9 3 092-013428-00001 B2 € 177.00

SRP MT300/450 ST/CR M9

M9 4 092-013428-00002 B2 € 181.00

SRP MT300/450 ST/CR M9

M9 5 092-013428-00003 B2 € 188.00

SRP MT300/450 ST/CR M8

M8 3 092-013428-20001 B2 € 177.00

SRP MT300/450 ST/CR M8

M8 4 092-013428-20002 B2 € 181.00

SRP MT300/450 ST/CR M8

M8 5 092-013428-20003 B2 € 188.00

SRP MT300G/450W ALU

Wire Ø mm 0.8 - 1.2

Contents

1 x 13 mm, 1 x 15 mm, 1 x 18 mm gas nozzle and nozzle holders 40 mm and 43 mm

Contact tips: 10 pcs at 1.0 mm, 10 pcs at 1.2 mm, 5 pcs at 0.8 mm

5 gas distributorswith combined PA core and torch key

Type Designation Thread, contact tip Length Item no. P Price

SRP MT300/450 ALU M9

Replaceable parts set, aluminium

M9 3 092-013428-00004 B2 € 172.00SRP MT300/450 ALU M9 M9 4 092-013428-00005 B2 € 178.00SRP MT300/450 ALU M9 M9 5 092-013428-00006 B2 € 184.00SRP MT300/450 ALU M8 M8 3 092-013428-20004 B2 € 167.00SRP MT300/450 ALU M8 M8 4 092-013428-20005 B2 € 173.00SRP MT300/450 ALU M8 M8 5 092-013428-20006 B2 € 179.00

Attention! New prices as of 01.05.2011

36 EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchMIG/MAG welding torch

gas cooled MT400

MT400G z Gas-cooled MIG/MAG welding torch

Duty cycle CO2 450 A / 35 %Duty cycle M21 400 A / 35 %Duty cycle M21 pulse 260 A / 35 %Wire Ø mm 0.8 - 2.4Gas flow l/min 10 - 20Connection Euro central

Type Designation Length Item no. P Pricem per pc.

MT400G EZA MIG/MAG welding torch, gas-cooled3 094-500021-00000 B1 € 300.004 094-500021-00004 B1 € 320.005 094-500021-00005 B1 € 340.00

MT400G U/D z Gas-cooled MIG/MAG function torch z Setting the wire feed speed z For alpha Q, Phoenix and Taurus z With alpha Q and also Phoenix Progress and Expert, programmes can also be optionally

selected

Duty cycle CO2 450 A / 35 %Duty cycle M21 400 A / 35 %Duty cycle M21 pulse 260 A / 35 %Wire Ø mm 0.8 - 2.4Gas flow l/min 10 - 20Connection Euro central, 19-pole

Type Designation Length Item no. P Pricem per pc.

MT400G U/D EZA MIG/MAG welding torch, 1x up/down, gas-cooled3 094-500021-00200 B1 € 360.004 094-500021-00204 B1 € 380.005 094-500021-00205 B1 € 400.00

MT400G 2U/D z Gas-cooled MIG/MAG function torch z Setting wire-feed speed and welding voltage or correcting the voltage z For alpha Q, Phoenix and Taurus z With alpha Q, Phoenix Progress and Expert, programs and JOBs can also be optionally selected

Duty cycle CO2 450 A / 35 %Duty cycle M21 400 A / 35 %Duty cycle M21 pulse 260 A / 35 %Wire Ø mm 0.8 - 2.4Gas flow l/min 10 - 20Connection Euro central, 19-pole

Type Designation Length Item no. P Pricem per pc.

MT400G 2U/D EZA MIG/MAG welding torch, 2x up/down, gas-cooled3 094-500021-00300 B1 € 365.004 094-500021-00304 B1 € 385.005 094-500021-00305 B1 € 405.00

Attention! New prices as of 01.05.2011

37EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchMIG/MAG welding torch

MT400G PC1 z Gas-cooled MIG/MAG function torch z Display and setting wire feed speed or programs z For alpha Q, Phoenix Progress, Phoenix Expert

Duty cycle CO2 450 A / 35 %Duty cycle M21 400 A / 35 %Duty cycle M21 pulse 260 A / 35 %Wire Ø mm 0.8 - 2.4Gas flow l/min 10 - 20Connection Euro central, 19-pole

Type Designation Length Item no. P Pricem per pc.

MT400G PC1 EZA MIG/MAG welding torch, Powercontrol 1, gas-cooled3 094-500021-00400 B1 € 395.004 094-500021-00404 B1 € 415.005 094-500021-00405 B1 € 435.00

MT400G PC2 z Gas-cooled MIG/MAG function torch z Displays and adjusts wire feed speed and voltage correction or, optionally, programs and jobs

can be selected (the latter does not apply to Taurus BasicS) z For alpha Q, Phoenix Progress, Phoenix Expert

Duty cycle CO2 450 A / 35 %Duty cycle M21 400 A / 35 %Duty cycle M21 pulse 260 A / 35 %Wire Ø mm 0.8 - 2.4Gas flow l/min 10 - 20Connection Euro central, 19-pole

Type Designation Length Item no. P Pricem per pc.

MT400G PC2 EZA MIG/MAG welding torch, Powercontrol 2, gas-cooled3 094-500021-00700 B1 € 400.004 094-500021-00704 B1 € 420.005 094-500021-00705 B1 € 440.00

Attention! New prices as of 01.05.2011

38 EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchMIG/MAG welding torch

gas cooled Replacement parts sets

SRP MT400G/550W ST/CR

Wire Ø mm 0.8 - 1.2Thread, contact tip M8

Type Designation Length Item no. P Price

SRP MT400/550 ST/CR M8 Replaceable parts set, steel

3 092-013429-20001 B2 € 200.004 092-013429-20002 B2 € 207.005 092-013429-20003 B2 € 214.00

SRP MT400G/550W ALU

Wire Ø mm 0.8 - 1.2Thread, contact tip M8

Type Designation Length Item no. P Price

SRP MT400/550 ALU M8 Replaceable parts set, aluminium3 092-013429-20004 B2 € 190.004 092-013429-20005 B2 € 196.005 092-013429-20006 B2 € 202.00

Attention! New prices as of 01.05.2011

39EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchMIG/MAG welding torch

water cooled MT450

MT450W z Water-cooled MIG/MAG welding torch

Duty cycle CO2 500 A / 100 %Duty cycle M21 450 A / 100 %Duty cycle M21 pulse 350 A / 100 %Wire Ø mm 0.8 - 1.6Gas flow l/min 10 - 25Connection Euro central

Type Designation Length Item no. P Pricem per pc.

MT450W EZA MIG/MAG welding torch, water-cooled3 094-500020-00000 B1 € 280.004 094-500020-00004 B1 € 300.005 094-500020-00005 B1 € 320.00

MT450W U/D z Water-cooled MIG/MAG function torch z Setting the wire feed speed z For alpha Q, Phoenix and Taurus z With alpha Q and also Phoenix Progress and Expert, programmes can also be optionally

selected

Duty cycle CO2 500 A / 100 %Duty cycle M21 450 A / 100 %Duty cycle M21 pulse 350 A / 100 %Wire Ø mm 0.8 - 1.6Gas flow l/min 10 - 25Connection Euro central, 19-pole

Type Designation Length Item no. P Pricem per pc.

MT450W U/D EZA MIG/MAG welding torch, 1 x up/down, water-cooled3 094-500020-00200 B1 € 340.004 094-500020-00204 B1 € 360.005 094-500020-00205 B1 € 380.00

MT450W 2U/D z Water-cooled MIG/MAG function torch z Setting wire-feed speed and welding voltage or correcting the voltage z For alpha Q, Phoenix and Taurus z With alpha Q, Phoenix Progress and Expert, programs and JOBs can also be optionally selected

Duty cycle CO2 500 A / 100 %Duty cycle M21 450 A / 100 %Duty cycle M21 pulse 350 A / 100 %Wire Ø mm 0.8 - 1.6Gas flow l/min 10 - 25Connection Euro central, 19-pole

Type Designation Length Item no. P Pricem per pc.

MT450W 2U/D EZA MIG/MAG welding torch, 2 up/down, water-cooled3 094-500020-00300 B1 € 345.004 094-500020-00304 B1 € 365.005 094-500020-00305 B1 € 385.00

Attention! New prices as of 01.05.2011

40 EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchMIG/MAG welding torch

MT450W PC1 z Water-cooled MIG/MAG function torch z Display and setting wire feed speed or programs z For alpha Q, Phoenix Progress, Phoenix Expert

Duty cycle CO2 500 A / 100 %Duty cycle M21 450 A / 100 %Duty cycle M21 pulse 350 A / 100 %Wire Ø mm 0.8 - 1.6Gas flow l/min 10 - 25Connection Euro central, 19-pole

Type Designation Length Item no. P Pricem per pc.

MT450W PC1 EZA MIG/MAG welding torch, Powercontrol 1, water-cooled3 094-500020-00400 B1 € 375.004 094-500020-00404 B1 € 395.005 094-500020-00405 B1 € 415.00

MT450W PC2 z Water-cooled MIG/MAG function torch z Displays and adjusts wire feed speed and voltage correction or, optionally, programs and jobs

can be selected (the latter does not apply to Taurus BasicS) z For alpha Q, Phoenix Progress, Phoenix Expert

Duty cycle CO2 500 A / 100 %Duty cycle M21 450 A / 100 %Duty cycle M21 pulse 350 A / 100 %Wire Ø mm 0.8 - 1.6Gas flow l/min 10 - 25Connection Euro central, 19-pole

Type Designation Length Item no. P Pricem per pc.

MT450W PC2 EZA MIG/MAG welding torch, Powercontrol 2, water-cooled3 094-500020-00700 B1 € 380.004 094-500020-00704 B1 € 400.005 094-500020-00705 B1 € 420.00

MT450WF z Water-cooled MIG welding torch with fume extraction z Infinite air volume control z For operation with high-vacuum extraction systems

Duty cycle CO2 500 A / 100 %Duty cycle M21 450 A / 100 %Duty cycle M21 pulse 350 A / 100 %Wire Ø mm 0.8 - 1.6Gas flow l/min 10 - 20Connection Euro central

Type Designation Length Item no. P Pricem per pc.

MT450W F EZA MIG/MAG welding torch, water-cooled, waste gas extraction3 094-500020-40000 B1 € 390.004 094-500020-40004 B1 € 410.005 094-500020-40005 B1 € 430.00

Attention! New prices as of 01.05.2011

41EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchMIG/MAG welding torch

water cooled Replacement parts sets

SRP MT300G/450W ST/CR

Wire Ø mm 0.8 - 1.2Thread, contact tip M8

Type Designation Length Item no. P Price

SRP MT300/450 ST/CR M8 Replaceable parts set, steel

3 092-013428-20001 B2 € 177.004 092-013428-20002 B2 € 181.005 092-013428-20003 B2 € 188.00

SRP MT300G/450W ALU

Wire Ø mm 0.8 - 1.2Thread, contact tip M8

Type Designation Length Item no. P Price

SRP MT300/450 ALU M8 Replaceable parts set, aluminium3 092-013428-20004 B2 € 167.004 092-013428-20005 B2 € 173.005 092-013428-20006 B2 € 179.00

Attention! New prices as of 01.05.2011

42 EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchMIG/MAG welding torch

water cooled MT550

MT550WR z Water-cooled MIG/MAG welding torch

Duty cycle CO2 650 A / 100 %Duty cycle M21 550 A / 100 %Duty cycle M21 pulse 500 A / 100 %Wire Ø mm 0.8 - 1.6Gas flow l/min 10 - 25Connection Euro central

Type Designation Length Item no. P Pricem per pc.

MT550WR EZA MIG/MAG welding torch, water-cooled3 094-500022-00000 B1 € 325.004 094-500022-00004 B1 € 345.005 094-500022-00005 B1 € 365.00

MT550WR U/D z Water-cooled MIG/MAG function torch z Setting the wire feed speed z For alpha Q, Phoenix and Taurus z With alpha Q and also Phoenix Progress and Expert, programmes can also be optionally

selected

Duty cycle CO2 650 A / 100 %Duty cycle M21 550 A / 100 %Duty cycle M21 pulse 500 A / 100 %Wire Ø mm 0.8 - 1.6Gas flow l/min 10 - 25Connection Euro central, 19-pole

Type Designation Length Item no. P Pricem per pc.

MT550WR U/D EZA MIG/MAG welding torch, 1 x up/down, water-cooled3 094-500022-00200 B1 € 385.004 094-500022-00204 B1 € 405.005 094-500022-00205 B1 € 425.00

MT550WR 2U/D z Water-cooled MIG/MAG function torch z Setting wire-feed speed and welding voltage or correcting the voltage z For alpha Q, Phoenix and Taurus z With alpha Q, Phoenix Progress and Expert, programs and JOBs can also be optionally selected

Duty cycle CO2 650 A / 100 %Duty cycle M21 550 A / 100 %Duty cycle M21 pulse 500 A / 100 %Wire Ø mm 0.8 - 1.6Gas flow l/min 10 - 25Connection Euro central, 19-pole

Type Designation Length Item no. P Pricem per pc.

MT550WR 2U/D EZA MIG/MAG welding torch, 2 up/down, water-cooled3 094-500022-00300 B1 € 390.004 094-500022-00304 B1 € 410.005 094-500022-00305 B1 € 430.00

Attention! New prices as of 01.05.2011

43EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchMIG/MAG welding torch

MT550WR PC1 z Water-cooled MIG/MAG function torch z Display and setting wire feed speed or programs z For alpha Q, Phoenix Progress, Phoenix Expert

Duty cycle CO2 650 A / 100 %Duty cycle M21 550 A / 100 %Duty cycle M21 pulse 500 A / 100 %Wire Ø mm 0.8 - 1.6Gas flow l/min 10 - 25Connection Euro central, 19-pole

Type Designation Length Item no. P Pricem per pc.

MT550WR PC1 EZA MIG/MAG welding torch, Powercontrol 1, water-cooled3 094-500022-00400 B1 € 420.004 094-500022-00404 B1 € 440.005 094-500022-00405 B1 € 460.00

MT550WR PC2 z Water-cooled MIG/MAG function torch z Displays and adjusts wire feed speed and voltage correction or, optionally, programs and jobs

can be selected (the latter does not apply to Taurus BasicS) z For alpha Q, Phoenix Progress, Phoenix Expert

Duty cycle CO2 650 A / 100 %Duty cycle M21 550 A / 100 %Duty cycle M21 pulse 500 A / 100 %Wire Ø mm 0.8 - 1.6Gas flow l/min 10 - 25Connection Euro central, 19-pole

Type Designation Length Item no. P Pricem per pc.

MT550WR PC2 EZA MIG/MAG welding torch, Powercontrol 2, water-cooled3 094-500022-00700 B1 € 425.004 094-500022-00704 B1 € 445.005 094-500022-00705 B1 € 465.00

MT550WLR z Water-cooled MIG/MAG welding torch z Extra long torch neck

Duty cycle CO2 650 A / 100 %Duty cycle M21 550 A / 100 %Duty cycle M21 pulse 500 A / 100 %Wire Ø mm 0.8 - 2.4Gas flow l/min 10 - 25Connection Euro central

Type Designation Length Item no. P Pricem per pc.

MT550WLR EZA MIG/MAG welding torch, water-cooled3 094-500022-20000 B1 € 370.004 094-500022-20004 B1 € 390.005 094-500022-20005 B1 € 410.00

Attention! New prices as of 01.05.2011

44 EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchMIG/MAG welding torch

MT550WLR U/D z Water-cooled MIG/MAG function torch z Extra long torch neck z Setting the wire feed speed z For alpha Q, Phoenix and Taurus z With alpha Q and also Phoenix Progress and Expert, programmes can also be optionally

selected

Duty cycle CO2 650 A / 100 %Duty cycle M21 550 A / 100 %Duty cycle M21 pulse 500 A / 100 %Wire Ø mm 0.8 - 2.4Gas flow l/min 10 - 25Connection Euro central, 19-pole

Type Designation Length Item no. P Pricem per pc.

MT550WLR U/D EZA MIG/MAG welding torch, 1 x up/down, water-cooled3 094-500022-20200 B1 € 425.004 094-500022-20204 B1 € 445.005 094-500022-20205 B1 € 465.00

MT550WLR 2U/D z Water-cooled MIG/MAG function torch z Extra long torch neck z Setting wire-feed speed and welding voltage or correcting the voltage z For alpha Q, Phoenix and Taurus z With alpha Q, Phoenix Progress and Expert, programs and JOBs can also be optionally selected

Duty cycle CO2 650 A / 100 %Duty cycle M21 550 A / 100 %Duty cycle M21 pulse 500 A / 100 %Wire Ø mm 0.8 - 2.4Gas flow l/min 10 - 25Connection Euro central, 19-pole

Type Designation Length Item no. P Pricem per pc.

MT550WLR 2U/D EZA MIG/MAG welding torch, 2 up/down, water-cooled3 094-500022-20300 B1 € 430.004 094-500022-20304 B1 € 450.005 094-500022-20305 B1 € 470.00

MT550WLR PC1 z Water-cooled MIG/MAG function torch z Extra long torch neck z Display and setting wire feed speed or programs z For alpha Q, Phoenix Progress, Phoenix Expert

Duty cycle CO2 650 A / 100 %Duty cycle M21 550 A / 100 %Duty cycle M21 pulse 500 A / 100 %Wire Ø mm 0.8 - 2.4Gas flow l/min 10 - 25Connection Euro central, 19-pole

Type Designation Length Item no. P Pricem per pc.

MT550WLR PC1 EZA MIG/MAG welding torch, Powercontrol 1, water-cooled3 094-500022-20400 B1 € 465.004 094-500022-20404 B1 € 485.005 094-500022-20405 B1 € 505.00

Attention! New prices as of 01.05.2011

45EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchMIG/MAG welding torch

MT550WLR PC2 z Water-cooled MIG/MAG function torch z Extra long torch neck z Displays and adjusts wire feed speed and voltage correction or, optionally, programs and jobs

can be selected (the latter does not apply to Taurus BasicS) z For alpha Q, Phoenix Progress, Phoenix Expert

Duty cycle CO2 650 A / 100 %Duty cycle M21 550 A / 100 %Duty cycle M21 pulse 500 A / 100 %Wire Ø mm 0.8 - 2.4Gas flow l/min 10 - 25Connection Euro central, 19-pole

Type Designation Length Item no. P Pricem per pc.

MT550WLR PC2 EZA MIG/MAG welding torch, Powercontrol 2, water-cooled3 094-500022-20700 B1 € 470.004 094-500022-20704 B1 € 490.005 094-500022-20705 B1 € 510.00

MT550WF z Water-cooled MIG welding torch with fume extraction z Infinite air volume control z For operation with high-vacuum extraction systems

Duty cycle CO2 650 A / 100 %Duty cycle M21 550 A / 100 %Duty cycle M21 pulse 500 A / 100 %Wire Ø mm 0.8 - 2.4Gas flow l/min 10 - 20Connection Euro central

Type Designation Length Item no. P Pricem per pc.

MT550WR F EZA MIG/MAG welding torch, water-cooled, waste gas extraction3 094-500022-40000 B1 € 435.004 094-500022-40004 B1 € 455.005 094-500022-40005 B1 € 475.00

Attention! New prices as of 01.05.2011

46 EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchMIG/MAG welding torch

water cooled Replacement parts sets

SRP MT400G/550W ST/CR

Wire Ø mm 0.8 - 1.2Thread, contact tip M8

Contents

1 x 15 mm, 1 x 17 mm, 1 x 19 mm gas nozzle and nozzle holders 35 mm and 38 mm

Contact tips: 10 pcs at 1.0 mm, 10 pcs at 1.2 mm, 5 pcs at 1.6 mm

5 gas distributorswith O-ring for gas nozzle, guide spiral, combined PA core

and torch key

Type Designation Thread, contact tip Length Item no. P Price

SRP MT400/550 ST/CR M9

Replaceable parts set, steel

M9 3 092-013429-00001 B2 € 176.00

SRP MT400/550 ST/CR M9

M9 4 092-013429-00002 B2 € 183.00

SRP MT400/550 ST/CR M9

M9 5 092-013429-00003 B2 € 190.00

SRP MT400/550 ST/CR M8

M8 3 092-013429-20001 B2 € 200.00

SRP MT400/550 ST/CR M8

M8 4 092-013429-20002 B2 € 207.00

SRP MT400/550 ST/CR M8

M8 5 092-013429-20003 B2 € 214.00

SRP MT400G/550W ALU

Wire Ø mm 0.8 - 1.2Thread, contact tip M8

Contents

1 x 15 mm, 1 x 17 mm, 1 x 19 mm gas nozzle and nozzle holders 35 mm and 38 mm

Contact tips: 10 pcs at 1.0 mm, 10 pcs at 1.2 mm, 5 pcs at 1.6 mm

5 gas distributorswith O-ring for gas nozzle, combined PA core and torch key

Type Designation Thread, contact tip Length Item no. P Price

SRP MT400/550 ALU M9

Replaceable parts set, aluminium

M9 3 092-013429-00004 B2 € 190.00SRP MT400/550 ALU M9 M9 4 092-013429-00005 B2 € 202.00SRP MT400/550 ALU M9 M9 5 092-013429-00006 B2 € 214.00SRP MT400/550 ALU M8 M8 3 092-013429-20004 B2 € 190.00SRP MT400/550 ALU M8 M8 4 092-013429-20005 B2 € 196.00SRP MT400/550 ALU M8 M8 5 092-013429-20006 B2 € 202.00

Attention! New prices as of 01.05.2011

47EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchMIG/MAG welding torch replacement parts

Gas nozzles MT series

MT220 G z Screw-on gas nozzle, fits MT220G and MT220CG torch series z Made from nickel-plated copper

Length mm 66

Type Designation Ø nozzle VPE Item no. P Pricemm Pc.. per pc.

GN MT220 Gas nozzle11 10 094-013062-00000 B2 € 8.3013 10 094-013061-00000 B2 € 8.3016 10 094-013063-00000 B2 € 8.30

MT300 G / MT450 W z Screw-on gas nozzle, fits MT300G, MT300CG and MT450W torch series z Made from nickel-plated copper

Length mm 71

Type Designation Ø nozzle VPE Item no. P Pricemm Pc.. per pc.

GN MT300 Gas nozzle13 10 094-013105-00000 B2 € 8.8015 10 094-013106-00000 B2 € 8.8018 10 094-013107-00000 B2 € 8.80

MT400 G / MT550 W 63MM z Screw-on gas nozzle, fits MT400G, MT550WR and MT550WLR torch series z Made from nickel-plated copper

Length mm 63

Type Designation Ø nozzle VPE Item no. P Pricemm Pc.. per pc.

GN MT550 Gas nozzle15 10 094-014177-00000 B2 € 11.3017 10 094-014179-00000 B2 € 11.3019 10 094-014181-00000 B2 € 11.30

Attention! New prices as of 01.05.2011

48 EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchMIG/MAG welding torch replacement parts

MT400 G / MT550 W 66MM z Screw-on gas nozzle, fits MT400G, MT550WR and MT550WLR torch series z Made from nickel-plated copper

Length mm 66

Type Designation Ø nozzle VPE Item no. P Pricemm Pc.. per pc.

GN MT550 Gas nozzle15 10 094-014178-00000 B2 € 11.5017 10 094-014180-00000 B2 € 11.5019 10 094-014182-00000 B2 € 11.50

Attention! New prices as of 01.05.2011

49EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchMIG/MAG welding torch replacement parts

Gas nozzles MIG series

GD MIG 15 z Insulated gas nozzle, fits MIG 15 torches z Made from nickel-plated copper

Length mm 52.5

Type Designation Ø nozzle VPE Item no. P Pricemm Pc.. per pc.

GN 15 Gas nozzle, MIG9.5 10 094-001212-00000 E4 € 2.9012 10 094-001085-00000 E4 € 2.4016 10 094-001198-00000 E4 € 2.80

GD MIG 24/240 z Nickel-plated gas nozzle, fits MIG 24/240 torches z Plug-in with clamping ring

Length mm 63.5

Type Designation Ø nozzle VPE Item no. P Pricemm Pc.. per pc.

GN 24/240 Gas nozzle, MIG10 10 094-001234-00000 E4 € 5.10

12.5 10 094-001190-00000 E4 € 3.9017 10 094-001233-00000 E4 € 4.00

GD MIG 25 z Nickel-plated, insulated, plug-in gas nozzle; fits MIG 25 welding torches.

Length mm 56

Type Designation Ø nozzle VPE Item no. P Pricemm Pc.. per pc.

GN 25 Gas nozzle, MIG11.5 10 094-001647-00000 E4 € 4.2015 10 094-002079-00000 E4 € 2.6018 10 094-013288-00000 E4 € 3.40

Attention! New prices as of 01.05.2011

50 EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchMIG/MAG welding torch replacement parts

GD MIG 36 z Nickel-plated gas nozzle, plug-in with clamping ring; fits MIG 36 torches

Length mm 84

Type Designation Ø nozzle VPE Item no. P Pricemm Pc.. per pc.

GN 36 Gas nozzle, MIG10 10 094-001241-00000 E4 € 6.40

12.5 10 094-001240-00000 E4 € 4.1017 10 094-001239-00000 E4 € 4.50

GD MIG 401/452/501 z Gas nozzles for torch types MIG 401, 452 and 501 z Copper, bright, with clamping ring

Length mm 75

Type Designation Ø nozzle VPE Item no. P Pricemm Pc.. per pc.

GN 401/501 Gas nozzle, MIG14 10 094-001260-00000 E4 € 6.0016 10 094-000945-00000 E4 € 4.8020 10 094-001259-00000 E4 € 5.00

Attention! New prices as of 01.05.2011

51EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchMIG/MAG welding torch replacement parts

Contact tips MT series

M6 ECU z Contact tip made from E-Cu copper z For MT220G, MT220CG and other torches with an M6 contact tip thread

Thread, contact tip M6

Type Designation Wire Ø VPE Item no. P Pricemm Pc.. per pc.

CT M6 E-CU Contact tip, MIG

0.8 10 094-016101-00000 B3 € 1.500.9 10 094-016102-00000 B3 € 1.501 10 094-016103-00000 B3 € 1.50

1.2 10 094-016104-00000 B3 € 1.50

M6 CuCrZr z Contact tip made from copper/chrome/zirconium alloy z For MT220G, MT220CG and other torches with an M6 contact tip thread

Thread, contact tip M6

Type Designation Wire Ø VPE Item no. P Pricemm Pc.. per pc.

CT M6 CUCRZR Contact tip, MIG

0.8 10 094-013071-00000 B3 € 2.000.9 10 094-013122-00000 B3 € 2.001 10 094-013072-00000 B3 € 2.00

1.2 10 094-014317-00000 B3 € 2.00

M6 AL z Contact tip made from E-Cu copper z Especially for aluminium z For MT220G, MT220CG and other torches with an M6 contact tip thread

Thread, contact tip M6

Type Designation Wire Ø VPE Item no. P Pricemm Pc.. per pc.

CTAL M6 E-CU Contact tip, MIG

0.8 10 094-016105-00000 B3 € 1.500.9 10 094-016106-00000 B3 € 1.501 10 094-016107-00000 B3 € 1.50

1.2 10 094-016108-00000 B3 € 1.50

Attention! New prices as of 01.05.2011

52 EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchMIG/MAG welding torch replacement parts

M8 ECU z Contact tip made from E-Cu copper z For MT300G, MT300CG, MT400G, MT450W, MT550WR, MT550WLR and other torches with an M8

contact tip thread

Thread, contact tip M8

Type Designation Wire Ø VPE Item no. P Pricemm Pc.. per pc.

CTAL M8 E-CU Contact tip, MIG

0.8 10 094-016109-00000 B3 € 1.850.9 10 094-016110-00000 B3 € 1.851 10 094-016111-00000 B3 € 1.85

1.2 10 094-007238-00000 B3 € 1.851.4 10 094-016112-00000 B3 € 1.851.6 10 094-016113-00000 B3 € 1.852 10 094-016114-00000 B3 € 1.85

M8 CuCrZr z Contact tip made from copper/chrome/zirconium alloy z For MT300G, MT300CG, MT400G, MT450W, MT550WR, MT550WLR and other torches with an M8

contact tip thread

Thread, contact tip M8

Type Designation Wire Ø VPE Item no. P Pricemm Pc.. per pc.

CT M8 CUCRZR Contact tip, MIG

0.8 10 094-014024-00000 B3 € 2.600.9 10 094-013129-00000 B3 € 2.601 10 094-014222-00000 B3 € 2.60

1.2 10 094-013113-00000 B3 € 2.601.4 10 094-014191-00000 B3 € 2.601.6 10 094-014192-00000 B3 € 2.602 10 094-014193-00000 B3 € 2.60

M8 AL z Contact tip made from E-Cu copper z Especially for aluminium z For MT300G, MT300CG, MT400G, MT450W, MT550WR, MT550WLR and other torches with an M8

contact tip thread

Thread, contact tip M8

Type Designation Wire Ø VPE Item no. P Pricemm Pc.. per pc.

CTAL M8 E-CU Contact tip, MIG

0.8 10 094-016115-00000 B3 € 1.850.9 10 094-016116-00000 B3 € 1.851 10 094-016117-00000 B3 € 1.85

1.2 10 094-016118-00000 B3 € 1.851.4 10 094-016119-00000 B3 € 1.851.6 10 094-016120-00000 B3 € 1.85

Attention! New prices as of 01.05.2011

53EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchMIG/MAG welding torch replacement parts

Contact tips MT series

M7 CuCrZr z Precision-manufactured contact tip made from a copper/chrome/zirconium alloy z Self-centring with fastener to secure the wire feed spiral/core z For MT220G and MT220CG with an M7 contact tip thread

Thread, contact tip M7

Type Designation Wire Ø VPE Item no. P Pricemm Pc.. per pc.

CT M7 CUCRZR Contact tip

0.8 10 094-013535-00000 B3 € 2.000.9 10 094-013536-00000 B3 € 2.001 10 094-013537-00000 B3 € 2.00

1.2 10 094-013538-00000 B3 € 2.00

M7 AL z Precision-manufactured contact tip made from E-Cu copper z Self-centring with fastener to secure the wire feed spiral/core z Especially for aluminium z For MT220G and MT220CG with an M7 contact tip thread

Thread, contact tip M7

Type Designation Wire Ø VPE Item no. P Pricemm Pack per pc.

CTAL M7 EC-U Contact tip, aluminium welding

0.8 10 094-013550-00000 B3 € 1.500.9 10 094-013551-00000 B3 € 1.501 10 094-013552-00000 B3 € 1.50

1.2 10 094-013553-00000 B3 € 1.50

M9 CuCrZr z Precision-manufactured contact tip made from copper/chrome/zirconium alloy z Self-centring with fastener to secure the wire feed spiral/core z For MT300G, MT300CG, MT400G, MT450W, MT550WR and MT550WLR with an M9 contact tip thread

Thread, contact tip M9

Type Designation Wire Ø VPE Item no. P Pricemm per pc.

CT M9 CUCRZR Contact tip

0.8 10 Pc.. 094-013528-00000 B3 € 2.600.9 10 Pc.. 094-013529-00000 B3 € 2.601 10 Pc.. 094-013530-00000 B3 € 2.60

1.2 10 Pc.. 094-013531-00000 B3 € 2.601.4 10

Pack094-013532-00000 B3 € 2.60

1.6 10 Pack

094-013533-00000 B3 € 2.60

2 10 Pack

094-013534-00000 B3 € 2.60

Attention! New prices as of 01.05.2011

54 EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchMIG/MAG welding torch replacement parts

M9 AL z Precision-manufactured contact tip made from E-Cu copper z Self-centring with fastener to secure the wire feed spiral/core z Especially for aluminium z For MT300G, MT300CG, MT400G, MT450W, MT550WR and MT550WLR with an M9 contact tip thread

Thread, contact tip M9

Type Designation Wire Ø VPE Item no. P Pricemm Pack per pc.

CTAL M9 EC-U Contact tip, aluminium welding

0.8 10 094-013543-00000 B3 € 2.600.9 10 094-013544-00000 B3 € 2.601 10 094-013545-00000 B3 € 2.60

1.2 10 094-013546-00000 B3 € 2.601.4 10 094-013547-00000 B3 € 2.601.6 10 094-013548-00000 B3 € 2.602 10 094-013549-00000 B3 € 2.60

Attention! New prices as of 01.05.2011

55EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchMIG/MAG welding torch replacement parts

Nozzle holders MT series

CTH M6 CuCrZr z Precision-manufactured nozzle holder made from copper/chrome/zirconium alloy. z For MT220G and MT220CG welding torches

Thread, contact tip M6

Type Designation Length VPE Item no. P Pricemm Pc.. per pc.

CTH M6 CuCrZr Nozzle holder 30 10 094-013069-00001 € 033 10 094-013070-00001 € 0

CTH M8 CuCrZr z Precision-manufactured nozzle holder made from copper/chrome/zirconium alloy. z For MT300G, MT300CG and MT450W welding torches

Thread, contact tip M8

Type Designation Length VPE Item no. P Pricemm Pc.. per pc.

CTH M8 CuCrZr Nozzle holder 40 10 094-013109-00001 € 043 10 094-013110-00001 € 0

CTH M8 CuCrZr z Precision-manufactured nozzle holder made from copper/chrome/zirconium alloy. z For MT400G, MT550WR and MT550WLR welding torches

Thread, contact tip M8

Type Designation Length Item no. P Pricemm

CTH M8 CuCrZr Nozzle holder 35 094-015489-00000 B2 € 11.0038 094-016018-00000 B2 € 11.90

Attention! New prices as of 01.05.2011

56 EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchMIG/MAG welding torch replacement parts

CTH M7 CuCrZr z Precision-manufactured nozzle holder made from copper/chrome/zirconium alloy. z For MT220G and MT220CG welding torches

Thread, contact tip M7

Type Designation Length VPE Item no. P Pricemm Pc.. per pc.

CTH M7 CUCRZR Nozzle holder 34.5 10 094-013542-00001 € 031.5 10 094-013541-00001 € 0

CTH M9 CuCrZr z Precision-manufactured nozzle holder made from copper/chrome/zirconium alloy. z For MT300G, MT300CG and MT450W welding torches

Thread, contact tip M9

Type Designation Length VPE Item no. P Pricemm Pc..

CTH M9 CUCRZR Nozzle holder35 – 094-013856-00000 B2 € 11.00

40.5 10 094-013539-00001 € 043.5 10 094-013540-00001 € 0

Attention! New prices as of 01.05.2011

57EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchMIG/MAG welding torch replacement parts

Nozzle holders MIG series

NOHO MIG 15 z Gas nozzle support, MIG 15

Length mm 41Thread, contact tip M6

Type Designation VPE Item no. P PricePc.. per pc.

NOSP MIG15 Retaining spring, MIG 15 20 094-001083-00000 E4 € 0.85NOHO MIG 15 Gas nozzle support, MIG 15 1 094-001207-00000 E4 € 3.15

NOHO MIG25 z Gas nozzle support for MIG 25 welding torch.

Length mm 35Thread, contact tip M6

Type Designation VPE Item no. P PricePc.. per pc.

NP 25 Retaining spring, MIG 25 20 094-001646-00000 E4 € 0.85CTH 25 Gas nozzle support, MIG 25 10 094-001823-00000 E4 € 1.50

CTH MIG 24 z Nozzle holder for MIG 24/240 and PP 24/240 torch types

Length mm 26Thread, contact tip M6

Type Designation VPE Item no. P PricePc.. per pc.

CTH 24 Nozzle holder, MIG 10 094-001227-00000 E4 € 1.70

Attention! New prices as of 01.05.2011

58 EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchMIG/MAG welding torch replacement parts

CTH MIG 36 z Nozzle holder for MIG 36 torch types

Length mm 28

Type Designation Thread, contact tip VPE Item no. P Price

Pc.. per pc.

CTH 36 Nozzle holder, MIG M6 10 094-001237-00000 E4 € 1.80M8 10 094-012552-00000 E4 € 2.10

Attention! New prices as of 01.05.2011

59EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchMIG/MAG welding torch replacement parts

Gas distributor MT series

GD MT220G z Gas distributor in highly heat resistant fibre-reinforced plastic z For MT220G and MT220CG welding torches

Type Designation VPE Item no. P PricePc.. per pc.

GD MT220 Gas distributor 10 094-013094-00000 B2 € 6.90

GD MT300G/450W z Gas distributor in highly heat resistant fibre-reinforced plastic z For MT300G, MT300CG and MT450W welding torches

Type Designation VPE Item no. P PricePc.. per pc.

GD MT300 Gas distributor 10 094-013096-00000 B2 € 5.90

GD MT400G/550W z Screw-on gas distributor made from highly heat-resistant, fibre-reinforced plastic z For MT400G, MT550WR and MT550WLR welding torches

Type Designation VPE Item no. P PricePc.. per pc.

GD MT550W Gas distributor 10 094-013111-00000 B2 € 7.50

Attention! New prices as of 01.05.2011

60 EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchMIG/MAG welding torch replacement parts

Gas distributor MIG series

GD MIG 24 z Gas distributor z For MIG 24 welding torches

Length mm 24

Type Designation VPE Item no. P PricePc.. per pc.

GASDIFF 24 Gas distributor, standard 10 094-009009-00000 E4 € 2.50

GD MIG 36 z Gas distributor z For MIG 36 welding torches

Length mm 32.5

Type Designation VPE Item no. P PricePc.. per pc.

GASDIFF 36Gas distributor, standard 10 094-001236-00000 E4 € 1.40Gas distributor, Longlife 10 094-012571-00000 E4 € 6.00Gas distributor, ceramic 10 094-012572-00000 E4 € 2.00

GD MIG 401/501 z Gas distributor z For MIG 401 and MIG 501 welding torches

Length mm 28

Type Designation VPE Item no. P PricePc.. per pc.

GDIFF 401Gas distributor, standard 10 094-000948-00000 E4 € 2.00Gas distributor, Longlife 10 094-011628-00000 E4 € 8.00Gas distributor, ceramic 10 094-012649-00000 E4 € 2.00

Attention! New prices as of 01.05.2011

61EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchMIG/MAG welding torch replacement parts

Wire spiral guides Insulated

LSTC 1.5/4.0 z Spiral guide for supporting low-alloy and medium-alloy welding wires z Used in gas- and water-cooled torches in the MT series z Insulation prevents gas losses

Wire Ø mm 0.8 - 1Inside Ø mm 1.5Outside Ø mm 4Colour code Blue

Type Designation Length Item no. P Pricem per pc.

LSTC 1.5/4.0 Spiral guide, insulated, for MT series3 094-013074-00000 B2 € 4.804 094-013075-00000 B2 € 6.005 094-014221-00000 B2 € 7.20

LSTC 2.0/4.0 z Spiral guide for supporting low-alloy and medium-alloy welding wires z Used in gas- and water-cooled torches in the MT series z Insulation prevents gas losses

Wire Ø mm 1.2 - 1.6Inside Ø mm 2Outside Ø mm 4Colour code Red

Type Designation Length Item no. P Pricem per pc.

LSTC 2.0/4.0 Spiral guide, insulated, for MT series3 094-007239-00000 B2 € 4.804 094-014223-00000 B2 € 6.005 094-014224-00000 B2 € 7.20

LTSC 2.4/5.5 z Spiral guide for supporting low-alloy and medium-alloy welding wires z Used in gas- and water-cooled torches in the MT series z Insulation prevents gas losses

Wire Ø mm 1.6 - 2Inside Ø mm 2.4Outside Ø mm 4.5Colour code White

Type Designation Length Item no. P Pricem per pc.

LTSC 2.4x4.5 Spiral guide, insulated, for MT series3 094-013662-00000 B2 € 5.204 094-013663-00000 B2 € 6.205 094-013664-00000 B2 € 7.20

Attention! New prices as of 01.05.2011

62 EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchMIG/MAG welding torch replacement parts

PA and teflon cores Combined wire cores

LPACOMBI 1.5-4.0 z Combined wire guide z Manufactured to length, with collet and O-ring

Wire Ø mm 0.8 - 1Inside Ø mm 1.5Outside Ø mm 4Colour code Dark grey

Type Designation Length Item no. P Pricem per pc.

LPACOMBI 1.5-4.0 Combined wire core, PA3 094-013687-00000 B2 € 19.004 094-013687-00004 B2 € 25.005 094-013687-00005 B2 € 31.00

LPACOMBI 2.0x4.0 z Combined wire guide z Manufactured to length, with collet and O-ring

Wire Ø mm 1.2 - 1.6Inside Ø mm 2Outside Ø mm 4Colour code Dark grey

Type Designation Length Item no. P Pricem per pc.

LPACOMBI 2.0x4.0 Combined wire core, PA3 094-013076-00000 B2 € 19.004 094-013077-00000 B2 € 25.005 094-013565-00000 B2 € 31.00

LPACOMBI 2.3x4.7 z Combined wire guide z Manufactured to length, with collet and O-ring

Wire Ø mm 1.6 - 2Inside Ø mm 2.3Outside Ø mm 4.7Colour code Dark grey

Type Designation Length Item no. P Pricem per pc.

LPACOMBI 2.3x4.7 Combined wire core, PA3 094-013665-00000 B2 € 21.504 094-013666-00000 B2 € 23.505 094-013667-00000 B2 € 25.50

Attention! New prices as of 01.05.2011

63EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchMIG/MAG welding torch replacement parts

LTCOMBI 1.5x4.0 z Combined wire guide z Manufactured to length, with collet and O-ring

Wire Ø mm 0.8 - 1.2Inside Ø mm 1.5Outside Ø mm 4Colour code Blue

Type Designation Length Item no. P Pricem per pc.

LTCOMBI 1.5-4.0 Combined wire core, Teflon3 094-013800-00000 B2 € 24.004 094-013800-00004 B2 € 27.005 094-013800-00005 B2 € 30.00

LTCOMBI 2.0x4.0 z Combined wire guide z Manufactured to length, with collet and O-ring

Wire Ø mm 1 - 1.2Inside Ø mm 2Outside Ø mm 4Colour code Red

Type Designation Length Item no. P Pricem per pc.

LTCOMBI 2.0x4.0 Combined wire core, Teflon3 094-013801-00000 B2 € 22.504 094-013801-00004 B2 € 25.005 094-013801-00005 B2 € 27.50

LTCOMBI 2.7x4.7 z Combined wire guide z Manufactured to length, with collet and O-ring

Wire Ø mm 1.6 - 2Inside Ø mm 2.7Outside Ø mm 4.7Colour code Yellow

Type Designation Length Item no. P Pricem per pc.

LTCOMBI 2.7x4.7 Combined wire core, Teflon3 094-013802-00000 B2 € 22.504 094-013802-00004 B2 € 25.005 094-013802-00005 B2 € 27.50

Attention! New prices as of 01.05.2011

64 EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchMIG/MAG welding torch replacement parts

LCTCOMBI 1.5x4.0 z Combined wire guide z Manufactured to length, with collet and O-ring

Wire Ø mm 0.8 - 1.2Inside Ø mm 1.5Outside Ø mm 4Colour code Black

Type Designation Length Item no. P Pricem per pc.

LCTCOMBI 1.5-4.0 Combined wire core, carbon/teflon3 094-013871-00000 B2 € 24.004 094-013871-00004 B2 € 28.005 094-013871-00005 B2 € 34.00

LCTCOMBI 2.0-4.0 z Combined wire guide z Manufactured to length, with collet and O-ring

Wire Ø mm 1.2 - 1.6Inside Ø mm 2Outside Ø mm 4Colour code Black

Type Designation Length Item no. P Pricem per pc.

LCTCOMBI 2.0x4.0 Combined wire core, carbon/teflon3 094-013828-00000 B2 € 22.504 094-013828-00004 B2 € 25.005 094-013828-00005 B2 € 27.50

LCTCOMBI 2.7-4.7 z Combined wire guide z Manufactured to length, with collet and O-ring

Wire Ø mm 1.6 - 2Inside Ø mm 2.7Outside Ø mm 4.7Colour code Black

Type Designation Length Item no. P Pricem per pc.

LCTCOMBI 2.7x4.7 Combined wire core, carbon/teflon3 094-013829-00000 B2 € 24.504 094-013829-00004 B2 € 28.005 094-013829-00005 B2 € 31.50

Attention! New prices as of 01.05.2011

65EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchMIG/MAG welding torch replacement parts

PA and teflon cores Material sold by the metre

LPA z By the metre in various diameters

Colour code Grey

Type Designation Wire Ø Inside Ø Outside Ø VPE Item no. P Pricemm mm mm m per m

LPA PA core, by the metre0.8 1.4 4 200 094-013781-00200 B2 € 2.201.2 2 4 200 094-013782-00200 B2 € 1.801.6 2.3 4.7 200 094-013783-00200 B2 € 2.00

LT z By the metre in various diameters

Type Designation Wire Ø Inside Ø Outside Ø Colour code VPE Item no. P Pricemm mm mm m per m

LT Teflon core, by the metre

0.8 1.5 4 Blue 100 094-013487-00100 B2 € 3.501.2 2 4 Red 100 094-013490-00100 B2 € 3.001.6 2.7 4.7 Yellow 100 094-013523-00100 B2 € 4.00

LCT z By the metre in various diameters

Colour code Black

Type Designation Wire Ø Inside Ø Outside Ø VPE Item no. P Pricemm mm mm m per m

LCT Carbon/Teflon core, by the metre

0.8 1.5 4 100 094-013524-00100 B2 € 4.001.2 2 4 100 094-013525-00100 B2 € 4.301.6 2.7 4.7 100 094-013870-00100 B2 € 4.20

Attention! New prices as of 01.05.2011

66 EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torch

Accessories

Diverses z Brass spiral for screwing onto PA or Teflon cores z O-rings to seal Teflon and PA cores z Collets for fixing in central connector z Jointing sleeve for fitting the combi spiral z Hexagonal nut for Euro central connector z Torch key for fitting contact tip, nozzle holder and other accessories

Type Designation VPE Item no. P Priceper pc.

COMBITIB 2.0X300 Brass spiral 1 Pc.. 094-013078-00000 B2 € 8.00COMBITIB 2.7X300 Brass spiral 1 Pc.. 094-013872-00000 B2 € 9.20OR MT550 O-ring 10

Pack094-014195-00000 B2 € 0.31

COL 4,0MM Collet 20 Pack

094-001082-00000 E4 € 1.05

COL 4,7MM Collet 20 Pack

094-001291-00000 E4 € 1.05

CB 4,0MM Connecting sleeves 20 Pack

094-013757-00000 B2 € 2.00

CB 4,7MM Connecting sleeves 20 Pack

094-013758-00000 B2 € 2.00

NUT EZA Hexagonal nut 10 Pack

094-001080-00000 E4 € 1.50

TTOOL Torch key 1 Pc.. 094-013121-00000 B2 € 0.80

Attention! New prices as of 01.05.2011

67EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torch

Attention! New prices as of 01.05.2011

68 EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torch

Attention! New prices as of 01.05.2011

EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torch

Overview

Welding torch Page

TIG welding torch

gas cooled

TIG150 72TIG200 74TIG17 77TIG26 78spotArc 79

water cooled

TIG260 80TIG450 82TIG18 84TIG20 85spotArc 86

TIG welding torch replaceable parts

Gas nozzlesTIG 150/260 87TIG series 88

Collets TIG series 93Collet casing TIG series 96Insulators 99Torch caps 101SpotArc replacement parts 103Tungsten electrodes 104

Tungsten electrode grinding machinesComplete systems Porta & Handy 107Replacement parts Various replacement parts, accessories 108

69

The gas and water cooled TIG welding torches have a high level of performance and a practical and light construction at the same time. The perfected cooling system guarantees extremely long service life and the optimum heat dissipation also permits the use of smaller tungsten electrodes. The innovative torch construction prevents direct temperature ingress of the gas nozzle on the torch body. That saves the torch, increases service life and thus ensures high cost efficiency.

u All EWM TIG torches are equipped with a 2.4 mm tungsten electrode fully ready to weld!

Attention! New prices as of 01.05.2011

Welding torches TIG welding torches

The advantage of quality

TIG series

Long service life

You can work for a long time with EWM TIG welding torches. Extremely good cooling allows a long service life. Minimum wear and clearly reduced down times and set up times leave more time for welding.

Maintenance friendly and low storage costs

EWM has limited the accessories to three components: the torch cap, the electrode holder or gas diffuser and the gas nozzle. This makes it possible for you to have not only clear warehousing but also lower costs.

Fatigue-free working with the lowest effort

An ergonomic handle with a high level of grip safety, a short ball joint for optimum movement radii and also light and flexible hose packages make fatigue-free working without interruptions possible.

Highlights

Quick amortisation

The torches for the TIG welding machines from EWM pay off quickly. The wear is considerably lower than average and the infrequent exchange of replace-ment and wearing parts minimises down times.

Function torch - perfect operation on site

The functionality of our torches leaves nothing to be desired. You select the wire speed, enter programmes and jobs (welding tasks) and have these dis-played. All EWM welding torches have torch and function buttons with high grade micro switches.

Attention! New prices as of 01.05.2011

Welding torchesTIG welding torches

Safe working

The large torch buttons with optimum pressure point guar-antee safe switching on and off of the welding current by means of microswitches.

Function torch UP/Down

During welding or a welding break you can adapt the welding current to your concrete requirements by pressing a but-ton. You select a pre-defined programme depending on the machine control variant.

Retox function torch

In addition to the UP/Down function the Retox control module provides information on a three digit LED display. You can see all the changes immediately and you do not have to look at the machine. Setting and displaying programmes, the welding current and other welding parameters.

HFL-version

All TIG torches of the series 150 to 450 can also be obtained in the High Flex leather version. Special hoses and cables inside the hose package give a high degree of flexibility. The first metre from the grip end is equipped with very hard wearing and soft nappa leather.

Gas rotary valve

Optimised for TIG welding with MMA welding machines of the Pico series. Optimum gas regulation with the rotary valve directly on the torch grip.

Advantages

Attention! New prices as of 01.05.2011

72 EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchTIG welding torch

gas cooled TIG150

TIG 150 GD z Gas-cooled TIG welding torch z Double push-button

Duty cycle DC- 150 A / 35 %Duty cycle AC 105 A / 35 %Ø electrode mm 1 - 2.4Gas flow l/min 4 - 12Connection Decentral, 5-pole, G1/4"

Type Designation Length Item no. P Pricem per pc.

TIG 150 GD 5P 2T TIG welding torch, gas-cooled 4 094-512291-00600 E4 € 155.008 094-512291-00608 E4 € 180.00

TIG 150 GD HFL z Gas-cooled TIG welding torch z Double push-button z Highly flexible hose package with 1 m leather protector

Duty cycle DC- 150 A / 35 %Duty cycle AC 105 A / 35 %Ø electrode mm 1 - 2.4Gas flow l/min 4 - 12Connection Decentral, 5-pole, G1/4"

Type Designation Length Item no. P Pricem per pc.

TIG 150 GD 5P 2T HFL TIG welding torch, gas-cooled 4 094-512291-10600 E4 € 200.008 094-512291-10608 E4 € 245.00

TIG 150 GD EZA z Gas-cooled TIG welding torch z Double push-button z Special version for connecting to the Picomig 180

Duty cycle DC- 150 A / 35 %Duty cycle AC 105 A / 35 %Gas flow l/min 4 - 12Connection Euro central

Type Designation Length Item no. P Pricem per pc.

TIG 150 GD EZA TIG welding torch, Euro central connection 4 094-512291-04000 E4 € 190.008 094-512291-04008 E4 € 230.00

TIG 150 GD RETOX HFL z Double push-button z For Tetrix DC, AC/DC Comfort and Synergic z „ON 12-pole connection socket“ option required

Duty cycle DC- 150 A / 35 %Duty cycle AC 105 A / 35 %Ø electrode mm 1 - 2.4Gas flow l/min 10 - 20Connection Decentral, 12-pole, G1/4"Length m 4

Type Designation Item no. P Priceper pc.

TIG 150 GD 12P RETOX HFL TIG function torch, Retox, gas-cooled 094-512291-10700 E4 € 325.00

Attention! New prices as of 01.05.2011

73EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchTIG welding torch

TIG 150 GD UD z Gas-cooled TIG function torch z Setting of welding current and programs z Double push-button z For Picotig AC/DC, Tetrix DC and AC/DC z An 8-pole connection socket must be retrofitted for portable machines up to 270 A

Duty cycle DC- 150 A / 35 %Duty cycle AC 105 A / 35 %Ø electrode mm 1 - 2.4Gas flow l/min 10 - 20Connection Decentral, 8-pole, G1/4"

Type Designation Length Item no. P Pricem per pc.

TIG 150 GD 8P 2T UD TIG function torch, up/down, gas-cooled 4 094-512291-00200 E4 € 210.008 094-512291-00208 E4 € 240.00

TIG 150 GD UD HFL z Gas-cooled TIG function torch z Setting of welding current and programs z Double push-button z For Picotig AC/DC, Tetrix DC and AC/DC z An 8-pole connection socket must be retrofitted for portable machines up to 270 A z Highly flexible hose package with 1 m leather protector

Duty cycle DC- 150 A / 35 %Duty cycle AC 105 A / 35 %Ø electrode mm 1 - 2.4Gas flow l/min 10 - 20Connection Decentral, 8-pole, G1/4"

Type Designation Length Item no. P Pricem per pc.

TIG 150 GD 8P 2T UD HFL TIG function torch, up/down, gas-cooled 4 094-512291-10200 E4 € 235.00

8 094-512291-10208 E4 € 280.00

Attention! New prices as of 01.05.2011

74 EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchTIG welding torch

gas cooled TIG200

TIG 200 GD z Gas-cooled TIG welding torch z Double push-button

Duty cycle DC- 200 A / 35 %Duty cycle AC 140 A / 35 %Ø electrode mm 1.6 - 3.2Connection Decentral, 5-pole, G1/4"

Type Designation Length Item no. P Pricem per pc.

TIG 200 GD 5P 2T TIG welding torch, gas-cooled 4 094-510981-00600 E4 € 165.008 094-510981-00608 E4 € 195.00

TIG 200 GD HFL z Gas-cooled TIG welding torch z Double push-button z Highly flexible hose package with 1 m leather protector

Duty cycle DC- 200 A / 35 %Duty cycle AC 140 A / 35 %Ø electrode mm 1.6 - 3.2Connection Decentral, 5-pole, G1/4"

Type Designation Length Item no. P Pricem per pc.

TIG 200 GD 5P 2T HFL TIG welding torch, gas-cooled 4 094-510981-10600 E4 € 200.008 094-510981-10608 E4 € 245.00

TIG 200 GD RETOX HFL z Gas-cooled TIG function torch z Setting and display of welding current and programs z Double push-button z For Tetrix DC, AC/DC Comfort and Synergic z „ON 12-pole connection socket“ option required

Duty cycle DC- 200 A / 35 %Duty cycle AC 140 A / 35 %Ø electrode mm 1.6 - 3.2Connection Decentral, 12-pole, G1/4"Length m 4

Type Designation Item no. P Priceper pc.

TIG 200 GD 12P RETOX HFL TIG function torch, Retox, gas-cooled 094-510981-10700 E4 € 305.00

TIG 200 GD UD z Gas-cooled TIG function torch z Setting of welding current and programs z Double push-button z For Picotig AC/DC, Tetrix DC and AC/DC z An 8-pole connection socket must be retrofitted for portable machines up to 270 A

Duty cycle DC- 200 A / 35 %Duty cycle AC 140 A / 35 %Ø electrode mm 1.6 - 3.2Connection Decentral, 8-pole, G1/4"

Type Designation Length Item no. P Pricem per pc.

TIG 200 GD 8P 2T UD TIG function torch, up/down, gas-cooled 4 094-510981-00200 E4 € 225.008 094-510981-00208 E4 € 265.00

Attention! New prices as of 01.05.2011

75EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchTIG welding torch

TIG 200 GD UD HFL z Gas-cooled TIG function torch z Setting of welding current and programs z Double push-button z For Picotig AC/DC, Tetrix DC and AC/DC z An 8-pole connection socket must be retrofitted for portable machines up to 270 A z Highly flexible hose package with 1 m leather protector

Duty cycle DC- 200 A / 35 %Duty cycle AC 140 A / 35 %Ø electrode mm 1.6 - 3.2Connection Decentral, 8-pole, G1/4"

Type Designation Length Item no. P Pricem per pc.

TIG 200 GD 8P 2T UD HFL TIG function torch, up/down, gas-cooled 4 094-510981-10200 E4 € 240.00

8 094-510981-10208 E4 € 290.00

TIG 200F GD z Gas-cooled TIG welding torch z Double push-button

Duty cycle DC- 200 A / 35 %Duty cycle AC 140 A / 35 %Ø electrode mm 1.6 - 3.2Connection Decentral, 5-pole, G1/4"

Type Designation Length Item no. P Pricem per pc.

TIG 200F GD 5P 2T TIG welding torch, gas-cooled 4 094-512527-00600 E4 € 195.008 094-512527-00608 E4 € 235.00

TIG 200F GD HFL z Gas-cooled TIG welding torch z Double push-button z Highly flexible hose package with 1 m leather protector

Duty cycle DC- 200 A / 35 %Duty cycle AC 140 A / 35 %Ø electrode mm 1.6 - 3.2Connection Decentral, 5-pole, G1/4"

Type Designation Length Item no. P Pricem per pc.

TIG 200F GD 5P 2T HFL TIG welding torch, gas-cooled 4 094-512527-10600 E4 € 205.008 094-512527-10608 E4 € 270.00

TIG 200F GD UD z Gas-cooled TIG function torch z Setting of welding current and programs z Double push-button z For Picotig AC/DC, Tetrix DC and AC/DC z An 8-pole connection socket must be retrofitted for portable machines up to 270 A

Duty cycle DC- 200 A / 35 %Duty cycle AC 140 A / 35 %Ø electrode mm 1.6 - 3.2Connection Decentral, 8-pole, G1/4"

Type Designation Length Item no. P Pricem per pc.

TIG 200F GD 8P 2T UD TIG function torch, up/down, gas-cooled 4 094-512527-00200 E4 € 200.008 094-512527-00208 E4 € 240.00

Attention! New prices as of 01.05.2011

76 EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchTIG welding torch

TIG 200F GD UD HFL z Gas-cooled TIG function torch z Setting of welding current and programs z Double push-button z For Picotig AC/DC, Tetrix DC and AC/DC z An 8-pole connection socket must be retrofitted for portable machines up to 270 A z Highly flexible hose package with 1 m leather protector

Duty cycle DC- 200 A / 35 %Duty cycle AC 140 A / 35 %Ø electrode mm 1.6 - 3.2Connection Decentral, 8-pole, G1/4"

Type Designation Length Item no. P Pricem per pc.

TIG 200F GD 8P 2T UD HFL TIG function torch, up/down, gas-cooled 4 094-512527-10200 E4 € 250.00

8 094-512527-10208 E4 € 305.00

Attention! New prices as of 01.05.2011

77EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchTIG welding torch

gas cooled TIG17

TIG 17 z Gas-cooled TIG welding torch z Double push-button

Duty cycle DC- 140 A / 35 %Duty cycle AC 100 A / 35 %Gas flow l/min 10 - 20Connection Decentral, 5-pole, G1/4"

Type Designation Length Item no. P Pricem per pc.

TIG 17 GD 5P 2T TIG welding torch, gas-cooled 4 094-511623-00600 E4 € 125.008 094-511623-00608 E4 € 155.00

TIG 17 GDV z Gas-cooled TIG welding torch z Gas rotary valve

Duty cycle DC- 140 A / 35 %Duty cycle AC 100 A / 35 %Gas flow l/min 10 - 20Connection Decentral, G1/4"

Type Designation Length Item no. P Pricem per pc.

TIG 17 GDV TIG welding torch, rotary gas valve, gas-cooled, decentral 4 094-010977-00000 E4 € 135.008 094-010978-00000 E4 € 140.00

Attention! New prices as of 01.05.2011

78 EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchTIG welding torch

gas cooled TIG26

TIG 26 z Gas-cooled TIG welding torch z Double push-button

Duty cycle DC- 180 A / 35 %Duty cycle AC 130 A / 35 %Ø electrode mm 0.5 - 4Gas flow l/min 10 - 20Connection Decentral, 5-pole, G1/4"

Type Designation Length Item no. P Pricem per pc.

TIG 26 GD 5P 2T TIG welding torch, gas-cooled 4 094-511621-00600 E4 € 140.008 094-511621-00608 E4 € 165.00

TIG 26 GD KOMBI z Gas-cooled TIG welding torch z Double push-button

Duty cycle DC- 180 A / 35 %Duty cycle AC 130 A / 35 %Ø electrode mm 0.5 - 4Gas flow l/min 10 - 20Connection Euro central

Type Designation Length Item no. P Pricem per pc.

TIG 26 GD 2T KOMBI TIG welding torch, gas-cooled 4 094-511621-30600 E4 € 210.008 094-511621-30608 E4 € 265.00

TIG 26 GDV z Gas-cooled TIG welding torch z Gas rotary valve

Duty cycle DC- 180 A / 35 %Duty cycle AC 130 A / 35 %Ø electrode mm 0.5 - 4Gas flow l/min 10 - 20Connection Decentral, G1/4"

Type Designation Length Item no. P Pricem per pc.

TIG 26GDV TIG welding torch, rotary gas valve, gas-cooled, decentral 4 094-010979-00000 E4 € 130.008 094-010980-00000 E4 € 135.00

Attention! New prices as of 01.05.2011

79EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchTIG welding torch

gas cooled spotArc

SpotArc TIG 26SP G z Gas-cooled TIG welding torch z Spot welding torch, with welding nozzles for fillet welds, edge welds and flat seams incl.

setting gauge

Duty cycle DC- 240 A / 60 %Duty cycle AC 140 A / 60 %Gas flow l/min 5 - 8Connection Decentral, 5-pole, G1/4"

Type Designation Length Item no. P Pricem per pc.

SPOTARC TIG 26SP G TIG welding torch, gas-cooled 4 094-012959-01000 E1 € 360.008 094-012959-01008 E1 € 470.00

Attention! New prices as of 01.05.2011

80 EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchTIG welding torch

water cooled TIG260

TIG 260 WD z Water-cooled TIG welding torch z Double push-button

Duty cycle DC- 260 A / 100 %Duty cycle AC 185 A / 100 %Ø electrode mm 1 - 3.2Gas flow l/min 0.7Connection Decentral, 5-pole, G1/4"

Type Designation Length Item no. P Pricem per pc.

TIG 260 WD 5P 2T TIG welding torch, water-cooled 4 094-510990-00600 E4 € 225.008 094-510990-00608 E4 € 255.00

TIG 260 WD HFL z Water-cooled TIG welding torch z Double push-button z Highly flexible hose package with 1 m leather protector

Duty cycle DC- 260 A / 100 %Duty cycle AC 185 A / 100 %Ø electrode mm 1 - 3.2Gas flow l/min 0.7Connection Decentral, 5-pole, G1/4"

Type Designation Length Item no. P Pricem per pc.

TIG 260 WD 5P 2T HFL TIG welding torch, water-cooled 4 094-510990-10600 E4 € 275.008 094-510990-10608 E4 € 340.00

TIG 260 WD UD z Water-cooled TIG function torch z Setting of welding current and programs z Double push-button z For Picotig AC/DC, Tetrix DC and AC/DC z An 8-pole connection socket must be retrofitted for portable machines up to 270 A

Duty cycle DC- 260 A / 100 %Duty cycle AC 185 A / 100 %Ø electrode mm 1 - 3.2Gas flow l/min 0.7Connection Decentral, 8-pole, G1/4"

Type Designation Length Item no. P Pricem per pc.

TIG 260 WD 8P 2T UD TIG function torch, up/down, water-cooled 4 094-510990-00200 E4 € 275.008 094-510990-00208 E4 € 310.00

TIG 260 WD UD HFL z Water-cooled TIG function torch z Setting of welding current and programs z Double push-button z For Picotig AC/DC, Tetrix DC and AC/DC z An 8-pole connection socket must be retrofitted for portable machines up to 270 A z Highly flexible hose package with 1 m leather protector

Duty cycle DC- 260 A / 100 %Duty cycle AC 185 A / 100 %Ø electrode mm 1 - 3.2Gas flow l/min 0.7Connection Decentral, 8-pole, G1/4"

Type Designation Length Item no. P Pricem per pc.

TIG 260 WD 8P 2T UD HFL TIG function torch, up/down, water-cooled 4 094-510990-10200 E4 € 315.00

8 094-510990-10208 E4 € 375.00

Attention! New prices as of 01.05.2011

81EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchTIG welding torch

TIG 260 WD RETOX HFL z Water-cooled TIG function torch z Setting and display of welding current and programs z Double push-button z For Tetrix DC, AC/DC Comfort and Synergic z „ON 12-pole connection socket“ option required z Highly flexible hose package with 1 m leather protector

Duty cycle DC- 260 A / 100 %Duty cycle AC 185 A / 100 %Ø electrode mm 1 - 3.2Gas flow l/min 0.7Connection Decentral, 12-pole, G1/4"

Type Designation Length Item no. P Pricem per pc.

TIG 260 WD 12P RETOX HFL TIG function torch, Retox, water-cooled 4 094-510990-10700 E4 € 400.00

8 094-510990-10708 E4 € 455.00

Attention! New prices as of 01.05.2011

82 EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchTIG welding torch

water cooled TIG450

TIG 450 WD z Water-cooled TIG welding torch z Double push-button

Duty cycle DC- 400 A / 100 %Duty cycle AC 280 A / 100 %Ø electrode mm 1.6 - 4.8Connection Decentral, 5-pole, G1/4"

Type Designation Length Item no. P Pricem per pc.

TIG 450 WD 5P 2T TIG welding torch, water-cooled 4 094-510993-00600 E4 € 245.008 094-510993-00608 E4 € 280.00

TIG 450 WD HFL z Water-cooled TIG welding torch z Double push-button z Highly flexible hose package with 1 m leather protector

Duty cycle DC- 400 A / 100 %Duty cycle AC 280 A / 100 %Ø electrode mm 1.6 - 4.8Connection Decentral, 5-pole, G1/4"

Type Designation Length Item no. P Pricem per pc.

TIG 450 WD 5P 2T HFL TIG welding torch, water-cooled 4 094-510993-10600 E4 € 305.008 094-510993-10608 E4 € 370.00

TIG 450 WD UD z Water-cooled TIG function torch z Setting of welding current and programs z Double push-button z For Picotig AC/DC, Tetrix DC and AC/DC z An 8-pole connection socket must be retrofitted for portable machines up to 270 A

Duty cycle DC- 400 A / 100 %Duty cycle AC 280 A / 100 %Ø electrode mm 1.6 - 4.8Connection Decentral, 8-pole, G1/4"

Type Designation Length Item no. P Pricem per pc.

TIG 450 WD 8P 2T UD TIG function torch, up/down, water-cooled 4 094-510993-00200 E4 € 290.008 094-510993-00208 E4 € 330.00

TIG 450 WD UD HFL z Water-cooled TIG function torch z Setting of welding current and programs z Double push-button z For Picotig AC/DC, Tetrix DC and AC/DC z An 8-pole connection socket must be retrofitted for portable machines up to 270 A z Highly flexible hose package with 1 m leather protector

Duty cycle DC- 400 A / 100 %Duty cycle AC 280 A / 100 %Ø electrode mm 1.6 - 4.8Connection Decentral, 8-pole, G1/4"

Type Designation Length Item no. P Pricem per pc.

TIG 450 WD 8P 2T UD HFL TIG function torch, up/down, water-cooled 4 094-510993-10200 E4 € 345.00

8 094-510993-10208 E4 € 415.00

Attention! New prices as of 01.05.2011

83EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchTIG welding torch

TIG 450 WD RETOX HFL z Water-cooled TIG function torch z Setting and display of welding current and programs z Double push-button z For Tetrix DC, AC/DC Comfort and Synergic z „ON 12-pole connection socket“ option required z Highly flexible hose package with 1 m leather protector

Duty cycle DC- 400 A / 100 %Duty cycle AC 280 A / 100 %Ø electrode mm 1.6 - 4.8Connection Decentral, 12-pole, G1/4"

Type Designation Length Item no. P Pricem per pc.

TIG 450 WD 12P RETOX HFL TIG function torch, Retox, water-cooled 4 094-510993-10700 E4 € 400.00

8 094-510993-10708 E4 € 470.00

TIG 450SC WD HFL z Water-cooled TIG welding torch z Double push-button z Highly flexible hose package with 1 m leather protector

Duty cycle DC- 450 A / 100 %Duty cycle AC 320 A / 100 %Ø electrode mm 1.6 - 4.8Connection Decentral, 5-pole, G1/4"

Type Designation Length Item no. P Pricem per pc.

TIG 450SC WD 5P 2T HFL TIG welding torch, water-cooled 4 094-511016-10600 E4 € 325.00

8 094-511016-10608 E4 € 400.00

TIG 450SC WD UD HFL z Water-cooled TIG function torch z Setting of welding current and programs z Double push-button z For Picotig AC/DC, Tetrix DC and AC/DC z An 8-pole connection socket must be retrofitted for portable machines up to 270 A z Highly flexible hose package with 1 m leather protector

Duty cycle DC- 450 A / 100 %Duty cycle AC 320 A / 100 %Ø electrode mm 1.6 - 4.8

Type Designation Length Item no. P Pricem per pc.

TIG 450SC WD 8P 2T UD HFL TIG function torch, up/down, water-cooled 4 094-511016-10200 E4 € 370.00

8 094-511016-10208 E4 € 445.00

TIG 450SC WD RETOX HFL z Water-cooled TIG function torch z Setting and display of welding current and programs z Double push-button z For Tetrix DC, AC/DC Comfort and Synergic z „ON 12-pole connection socket“ option required z Highly flexible hose package with 1 m leather protector

Duty cycle DC- 450 A / 100 %Duty cycle AC 320 A / 100 %Ø electrode mm 1.6 - 4.8Connection Decentral, 12-pole, G1/4"

Type Designation Length Item no. P Pricem per pc.

TIG 450SC WD 12P RETOX HFL TIG function torch, Retox, water-cooled 4 094-511016-10700 E4 € 425.00

8 094-511016-10708 E4 € 505.00

Attention! New prices as of 01.05.2011

84 EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchTIG welding torch

water cooled TIG18

TIG 18 z Water-cooled TIG welding torch z Double push-button

Duty cycle DC- 320 A / 100 %Duty cycle AC 230 A / 100 %Ø electrode mm 0.5 - 4Gas flow l/min 10 - 20Connection Decentral, 5-pole, G1/4"

Type Designation Length Item no. P Pricem per pc.

TIG 18 WD 5P 2T TIG welding torch, water-cooled 4 094-511490-00600 E4 € 170.008 094-511490-00608 E4 € 195.00

TIG 18SC z Water-cooled TIG welding torch z Double push-button z Greater load capacity due to improved design of the hose package

Duty cycle DC- 400 A / 100 %Duty cycle AC 280 A / 100 %Ø electrode mm 0.5 - 4Gas flow l/min 10 - 20Connection Decentral, 5-pole, G1/4", rapid-action coupling G1/4"

Type Designation Length Item no. P Pricem per pc.

TIG 18SC WD 5P 2T TIG welding torch, water-cooled 4 094-511624-00600 E4 € 190.008 094-511624-00608 E4 € 215.00

TIG 18 WD KOMBI z Water-cooled TIG welding torch z Double push-button

Duty cycle DC- 320 A / 100 %Duty cycle AC 230 A / 100 %Ø electrode mm 0.5 - 4Gas flow l/min 10 - 20Connection Euro central

Type Designation Length Item no. P Pricem per pc.

TIG 18 WD 2T KOMBI TIG welding torch, water-cooled 4 094-511490-30600 E4 € 285.008 094-511490-30608 E4 € 385.00

Attention! New prices as of 01.05.2011

85EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchTIG welding torch

water cooled TIG20

TIG 20 z Water-cooled TIG welding torch z Double push-button

Duty cycle DC- 240 A / 100 %Duty cycle AC 170 A / 100 %Ø electrode mm 0.5 - 3.2Gas flow l/min 10 - 20Connection Decentral, 5-pole, G1/4"

Type Designation Length Item no. P Pricem per pc.

TIG 20 WD 5P 2T TIG welding torch, water-cooled 4 094-511445-00600 E4 € 165.008 094-511445-00608 E4 € 190.00

Attention! New prices as of 01.05.2011

86 EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchTIG welding torch

water cooled spotArc

SpotArc TIG 18SP W z Water-cooled TIG welding torch z Spot welding torch, with welding nozzles for fillet welds, edge welds and flat seams incl.

setting gauge

Duty cycle DC- 350 A / 60 %Duty cycle AC 245 A / 60 %Gas flow l/min 5 - 8

Type Designation Length Item no. P Pricem per pc.

SPOTARC TIG 18SP W TIG welding torch, water-cooled 4 094-009612-01000 E1 € 495.008 094-009612-01001 E1 € 525.00

Attention! New prices as of 01.05.2011

87EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchTIG welding torch replaceable parts

Gas nozzles TIG 150/260

GN TIG 150/260 z Keramische Gasdüsen z For TIG 150/260 torch types

Length mm 36

Type Designation Ø nozzle Size VPE Item no. P Pricemm Pc.. per pc.

GN TIG 150/260 Ceramic gas nozzle

6.5 6 10 094-012673-00000 E4 € 3.008 7 10 094-012674-00000 E4 € 3.00

10 8 10 094-011982-00000 E4 € 3.0011.5 10 10 094-011757-00000 E4 € 3.00

GN TIG 150/260 S z Keramische Gasdüsen z For TIG 150/260 torch types

Length mm 26

Type Designation Ø nozzle Size VPE Item no. P Pricemm Pc.. per pc.

GN TIG 150/260 S Ceramic gas nozzle

6.5 4 10 094-012672-00000 E4 € 1.808 6 10 094-012405-00000 E4 € 1.80

10 8 10 094-011756-00000 E4 € 1.8011.5 10 10 094-011980-00000 E4 € 1.80

Attention! New prices as of 01.05.2011

88 EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchTIG welding torch replaceable parts

Gas nozzles TIG series

GN TIG 200/450 z Keramische Gasdüsen z For TIG 200/450 torch types

Length mm 37

Type Designation Ø nozzle Size VPE Item no. P Pricemm Pc.. per pc.

GN TIG 200/450

Ceramic gas nozzle 7.5 5 10 094-009646-00000 E4 € 2.00Ceramic gas nozzle 10 6 10 094-009647-00000 E4 € 2.00Ceramic gas nozzle 13 8 10 094-009648-00000 E4 € 2.00Ceramic gas nozzle, reinforced 13 8 10 094-011997-00000 E4 € 3.00Ceramic gas nozzle 15 10 10 094-009649-00000 E4 € 2.00Ceramic gas nozzle, reinforced 15 12 10 094-011998-00000 E4 € 3.00

GN TIG 200/450 S z Keramische Gasdüsen z For TIG 200/450 torch types

Length mm 26

Type Designation Ø nozzle Size VPE Item no. P Pricemm Pc.. per pc.

GN TIG 200/450 S Ceramic gas nozzle 10 4 10 094-009655-00000 E4 € 3.0013 6 10 094-009656-00000 E4 € 3.00

GN TIG 200/450 L z Extended gas nozzle for hard-to-reach spots z For TIG 200/450 torch types

Length mm 52

Type Designation Ø nozzle Size VPE Item no. P Pricemm Pc.. per pc.

GN TIG 200/450 L Ceramic gas nozzle

7.5 5 10 094-009650-00000 E4 € 3.0010 6 10 094-009651-00000 E4 € 3.0013 8 10 094-009653-00000 E4 € 3.0015 10 10 094-009654-00000 E4 € 3.00

Attention! New prices as of 01.05.2011

89EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchTIG welding torch replaceable parts

GN Jumbo z Gas nozzles for jumbo gas nozzle extension for TIG 200/450 torch types

Length mm 48

Type Designation Ø nozzle Size VPE Item no. P Pricemm Pc.. per pc.

GN Jumbo Ceramic gas nozzle12.5 12 10 094-009663-00000 E4 € 3.0016 16 10 094-009664-00000 E4 € 3.00

19.5 20 10 094-009665-00000 E4 € 3.00

GN TIG 9/20 z Standard gas nozzle for welding steel and aluminium z For TIG 9 and 20 torch types

Length mm 30

Type Designation Ø nozzle Size VPE Item no. P Pricemm Pc.. per pc.

GN TIG 9/20 Ceramic gas nozzle

6.5 4 10 094-001343-00000 E4 € 1.008 5 10 094-001344-00000 E4 € 1.00

9.5 6 10 094-001345-00000 E4 € 1.0011 7 10 094-000930-00000 E4 € 1.00

12.5 8 10 094-001122-00000 E4 € 1.0016 10 10 094-001346-00000 E4 € 1.00

GN TIG 9/20 L z Extended gas nozzle for hard-to-reach spots z For TIG 9 and 20 torch types

Length mm 48

Type Designation Ø nozzle Size VPE Item no. P Pricemm Pc.. per pc.

GN TIG 9/20 L Ceramic gas nozzle, long, TIG6.5 4 10 094-001347-00000 E4 € 2.008 5 10 094-001348-00000 E4 € 2.00

9.5 6 10 094-001349-00000 E4 € 2.00

Attention! New prices as of 01.05.2011

90 EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchTIG welding torch replaceable parts

GN TIG 9/20 XL z Extended gas nozzle for hard-to-reach spots z For TIG 9 and 20 torch types

Type Designation Ø nozzle Length Size VPE Item no. P Pricemm mm Pc.. per pc.

GN TIG 9/20 XL Ceramic gas nozzle, long, TIG6.5 63 4 10 094-012683-00000 E4 € 2.008 63 5 10 094-012684-00000 E4 € 2.00

6.5 89 4 10 094-012685-00000 E4 € 2.00

GN GD TIG 9/20 z Gas nozzle fits collet casing with gas diffuser z Suitable for all materials z Excellent welding results with CrNi steels z For TIG 9 and 20 torch types

Length mm 25.5

Type Designation Ø nozzle Size VPE Item no. P Pricemm Pc.. per pc.

GN GD TIG 9/20 Ceramic gas nozzle, gas lens, TIG

6.5 4 10 094-001356-00000 E4 € 1.008 5 10 094-001357-00000 E4 € 1.00

9.5 6 10 094-001358-00000 E4 € 1.0011 7 10 094-001359-00000 E4 € 1.00

GN GD TIG 17/18/26 z Standard gas nozzle for welding steel and aluminium z For TIG 17/18/26/18SC torch types

Length mm 47

Type Designation Ø nozzle Size VPE Item no. P Pricemm Pc.. per pc.

GN GD TIG 17/18/26 Ceramic gas nozzle

6.5 4 10 094-001316-00000 E4 € 1.008 5 10 094-000926-00000 E4 € 1.00

9.5 6 10 094-001317-00000 E4 € 1.0011 7 10 094-000927-00000 E4 € 1.00

12.5 8 10 094-000929-00000 E4 € 1.0016 10 10 094-001318-00000 E4 € 1.00

19.5 12 10 094-001319-00000 E4 € 1.00

Attention! New prices as of 01.05.2011

91EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchTIG welding torch replaceable parts

GNDIFF TIG 150/260 z Gas nozzle fits collet casing with gas diffuser z Suitable for all materials z Excellent welding results with CrNi steels z For TIG 150/260 torch types

Length mm 47

Type Designation Ø nozzle Size VPE Item no. P Pricemm Pc.. per pc.

GNDIFF TIG 150/260 Ceramic gas nozzle for gas lens, TIG

6.5 4 10 094-001320-00000 E4 € 2.008 5 10 094-001321-00000 E4 € 2.00

9.5 6 10 094-001322-00000 E4 € 2.0011 7 10 094-001195-00000 E4 € 2.00

12.5 8 10 094-001196-00000 E4 € 2.0016 10 10 094-001323-00000 E4 € 2.00

GN TIG 17/18/26/18SC z Extended gas nozzle for hard-to-reach spots z For TIG 17/18/26/18SC torch types

Length mm 76

Type Designation Ø nozzle Size VPE Item no. P Pricemm Pc.. per pc.

GN TIG 17/18/26/18SC Ceramic gas nozzle, long, TIG8 5 10 094-012691-00000 E4 € 2.00

9.5 6 10 094-012692-00000 E4 € 2.0011 7 10 094-012693-00000 E4 € 2.00

GNDIF TIG 17/18/26/18SC z Extended gas nozzle for hard-to-reach spots z For TIG 17/18/26/18SC torch types

Length mm 76

Type Designation Ø nozzle Size VPE Item no. P Pricemm Pc.. per pc.

GNDIF TIG 17/18/26/18SC Ceramic gas nozzle, long, TIG

8 5 10 094-011135-00000 E4 € 2.009.5 6 10 094-011136-00000 E4 € 2.0011 7 10 094-012694-00000 E4 € 2.00

Attention! New prices as of 01.05.2011

92 EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchTIG welding torch replaceable parts

GNDIF JUMBO TIG 17/18/26/18SC

z Ideal for titanium welding z Excellent results, even with CrNi z Jumbo gas nozzle for collet casing with jumbo gas diffuser z For TIG 17/18/26/18SC torch types

Type Designation Ø nozzle Length Size VPE Item no. P Pricemm mm Pc.. per pc.

Jumbo gas nozzle, all TIG torches

Ceramic gas nozzle, jumbo, TIG

9.5 48 6 10 094-011642-00000 E4 € 3.0012.5 48 8 10 094-011643-00000 E4 € 3.0016 48 10 10 094-011644-00000 E4 € 3.00

19.5 48 12 10 094-003136-00000 E4 € 3.0024 34 12 10 094-012686-00000 E4 € 3.00

Attention! New prices as of 01.05.2011

93EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchTIG welding torch replaceable parts

Collets TIG series

COL TIG 150/260 z Collet/electrode holder with gas lens for different tungsten electrode diameters z For TIG 150/260 torch types

Type Designation Ø electrode VPE Item no. P Pricemm Pc.. per pc.

COL 150/260 Electrode holder, TIG

1 5 094-012665-00000 E4 € 6.001.6 5 094-012406-00000 E4 € 6.002 5 094-012666-00000 E4 € 6.00

2.4 5 094-011755-00000 E4 € 6.003.2 5 094-012667-00000 E4 € 6.00

COL DIF TIG 150/260 z Collet/electrode holder with gas lens for different tungsten electrode diameters z Improves gas shielding and provides a laminar gas flow z Recommended to avoid annealing colours when welding CrNi steels z For TIG 150/260 torch types

Type Designation Ø electrode Item no. P Pricemm per pc.

DIF 150/260 Gas diffusers, TIG

1 094-012668-00000 E4 € 16.001.6 094-012669-00000 E4 € 16.002 094-012670-00000 E4 € 16.00

2.4 094-011984-00000 E4 € 16.003.2 094-012671-00000 E4 € 16.00

COL TIG 200/450W/SC z Collet/electrode holder with gas lens for different tungsten electrode diameters z For TIG 200/450 torch types

Type Designation Ø electrode VPE Item no. P Pricemm Pc.. per pc.

COL 200/450 Electrode holder, TIG

1.6 5 094-009634-00000 E4 € 7.002 5 094-009635-00000 E4 € 7.00

2.4 5 094-009636-00000 E4 € 7.003.2 5 094-009637-00000 E4 € 7.004 5 094-009638-00000 E4 € 7.00

4.8 5 094-009639-00000 E4 € 7.00

Attention! New prices as of 01.05.2011

94 EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchTIG welding torch replaceable parts

COL DIF TIG 200/450 z Collet/electrode holder with gas lens for different tungsten electrode diameters z Improves gas shielding and provides a laminar gas flow z Recommended to avoid annealing colours when welding CrNi steels z For TIG 200/450 torch types

Type Designation Ø electrode Item no. P Pricemm per pc.

DIF 200/450 Gas diffusers, TIG

1.6 094-009640-00000 E4 € 17.002 094-009641-00000 E4 € 17.00

2.4 094-009642-00000 E4 € 17.003.2 094-009643-00000 E4 € 17.004 094-009644-00000 E4 € 17.00

4.8 094-009645-00000 E4 € 17.00

COL TIG 9/20 z Collet/electrode holder with gas lens for different tungsten electrode diameters z For EWM TIG 9/20

Length mm 25.4

Type Designation Ø electrode VPE Item no. P Pricemm Pc.. per pc.

COL TIG 9/20 Collet, TIG

0.5 10 094-001333-00000 E4 € 1.201 10 094-001334-00000 E4 € 1.20

1.2 10 094-001335-00000 E4 € 1.201.6 10 094-001121-00000 E4 € 1.202 10 094-001336-00000 E4 € 1.20

2.4 10 094-000934-00000 E4 € 1.203.2 10 094-001337-00000 E4 € 1.20

COL Jumbo TIG 9/20 z Collet/electrode holder with gas lens for different tungsten electrode diameters z For use with jumbo gas nozzles z For TIG 9/20

Length mm 40

Type Designation Ø electrode VPE Item no. P Pricemm Pc.. per pc.

COL Jumbo TIG 9/20 Collet, gas lens, XXL, TIG

0.5 10 094-012675-00000 E4 € 4.001 10 094-012676-00000 E4 € 4.00

1.6 10 094-012677-00000 E4 € 4.002.4 10 094-002971-00000 E1 € 4.003.2 10 094-012678-00000 E4 € 4.00

Attention! New prices as of 01.05.2011

95EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchTIG welding torch replaceable parts

COL TIG17/26/18 z Copper collet for different tungsten electrode diameters z For TIG 17/18/26/18SC torch types

Length mm 50

Type Designation Ø electrode VPE Item no. P Pricemm Pc.. per pc.

COL TIG 17/26/18 Collet, TIG

0.5 10 094-001308-00000 E4 € 2.001 10 094-001309-00000 E4 € 2.00

1.2 10 094-001310-00000 E4 € 2.001.6 10 094-000931-00000 E4 € 2.002 10 094-001311-00000 E4 € 2.00

2.4 10 094-000932-00000 E4 € 2.003.2 10 094-000935-00000 E4 € 2.004 10 094-001312-00000 E4 € 2.00

COL H TIG17/26/18 z Collet/electrode holder with gas lens for different tungsten electrode diameters z For high-performance torch TIG 18SC

Length mm 49

Type Designation Ø electrode VPE Item no. P Pricemm Pc.. per pc.

COL HL 18SC Collet, TIG3.2 10 094-001361-00000 E4 € 5.004 10 094-001116-00000 E4 € 5.00

4.8 10 094-001115-00000 E4 € 5.00

Attention! New prices as of 01.05.2011

96 EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchTIG welding torch replaceable parts

Collet casing TIG series

GD TIG 150-450 z Collet casing with gas diffuser for different tungsten electrode diameters z Improves gas shielding and provides a laminar gas flow z For TIG 150-450 torch types

Type Designation Ø electrode Item no. P Pricemm per pc.

GDIFF 150-450 Gas diffusers, TIG

1.6 094-009658-00000 E4 € 37.002.4 094-009659-00000 E4 € 37.003.2 094-009660-00000 E4 € 37.004 094-009661-00000 E4 € 37.00

4.8 094-009662-00000 E4 € 37.00

COLB DIF TIG 9/20 z Collet casing with gas diffuser for different tungsten electrode diameters z Improves gas shielding and provides a laminar gas flow z Recommended to avoid annealing colours when welding CrNi steels z For TIG 9 and 20 torch types

Type Designation Ø electrode VPE Item no. P Pricemm Pc.. per pc.

DIFF 9/20 Collet casing, gas lens,TIG

0.5 - 1 10 094-001350-00000 E4 € 6.001.2 10 094-001351-00000 E4 € 6.001.6 10 094-001352-00000 E4 € 6.002 10 094-001353-00000 E4 € 6.00

2.4 10 094-001354-00000 E4 € 6.003.2 10 094-001355-00000 E4 € 6.00

COLB TIG 9/20 z Collet casing z For TIG 9 and 20 torch types

Type Designation Ø electrode VPE Item no. P Pricemm Pc.. per pc.

COLB 9/20 Collet casings, TIG

0.5 - 1 10 094-001338-00000 E4 € 6.001.2 10 094-001339-00000 E4 € 3.001.6 10 094-001340-00000 E4 € 2.002 10 094-001341-00000 E4 € 3.00

2.4 10 094-000939-00000 E4 € 2.003.2 10 094-001342-00000 E4 € 2.00

Attention! New prices as of 01.05.2011

97EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchTIG welding torch replaceable parts

DIFFTITJumbo TIG 9/20 z Collet casing with gas diffuser for different tungsten electrode diameters z Extra large gas diffuser for different tungsten electrode diameters z Improves gas shielding and provides a laminar gas flow z Specially developed for welding titanium alloys z Impressively low annealing discolouration when welding CrNi steels z For TIG 9 and 20 torch types

Type Designation Ø electrode VPE Item no. P Pricemm Pc.. per pc.

DIFFTIT 9/20 Collet casing, gas lens,XXL TIG

0.5 - 1 5 094-012679-00000 E4 € 15.001.6 5 094-012680-00000 E4 € 15.002.4 5 094-012681-00000 E4 € 15.003.2 5 094-012682-00000 E4 € 15.00

COLB TIG 17/18/26 z Collet casing, copper z For TIG 17/18/26 torch types

Type Designation Ø electrode VPE Item no. P Pricemm Pc.. per pc.

COLB 17/26/18 Collet casings, TIG

0.5 - 1.2 10 094-001314-00000 E4 € 3.001.6 10 094-000936-00000 E4 € 3.00

2 - 2.4 10 094-000937-00000 E4 € 3.003.2 10 094-000940-00000 E4 € 3.004 10 094-001315-00000 E4 € 3.00

COLB 18SC z Collet casing, brass z For high-performance torch TIG 18SC

Type Designation Ø electrode VPE Item no. P Pricemm Pc.. per pc.

COLB 18S Collet casings, TIG 0.5 - 3.2 10 094-011137-00000 E4 € 7.003.2 - 4.8 10 094-001117-00000 E4 € 7.00

Attention! New prices as of 01.05.2011

98 EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchTIG welding torch replaceable parts

COLB DIF TIG 17/18/26 z Collet casing with gas diffuser for different tungsten electrode diameters z For TIG 17/18/26 torch types z Gas nozzle fits collet casing with gas diffuser z Suitable for all materials z Excellent welding results with CrNi steels

Type Designation Ø electrode VPE Item no. P Pricemm Pc.. per pc.

COLB DIF 17/26/18 Collet casing, gas lens,TIG

1 10 094-001324-00000 E4 € 6.001.6 10 094-001325-00000 E4 € 6.002.4 10 094-001192-00000 E4 € 6.003.2 10 094-001193-00000 E4 € 6.004 10 094-001326-00000 E4 € 6.00

COLB DIFTIT Jumbo TIG 17/18/26

z Collet casing with gas diffuser for different tungsten electrode diameters z Extra large gas diffuser for different tungsten electrode diameters z For TIG 17/18/26 torch types z Improves gas shielding and provides a laminar gas flow z Specially developed for welding titanium alloys z Impressively low annealing discolouration when welding CrNi steels

Type Designation Ø electrode VPE Item no. P Pricemm Pc.. per pc.

COLB DIFTIT 17/26/18 Collet casing, gas lens,XXL TIG

1.6 5 094-003137-00010 E4 € 12.002.4 5 094-003137-00000 E4 € 12.003.2 5 094-000000-00000 E4 € 13.004 5 094-011641-00000 E4 € 13.00

COLB DIF 18SC z Collet casing with gas lens fits high-performance TIG 18SC torch z For high-performance torch TIG 18SC

Type Designation Ø electrode VPE Item no. P Pricemm Pc.. per pc.

COLB DIF 18S Collet casing, gas lens,TIG

0.5 10 094-012696-00000 E4 € 17.001 10 094-012697-00000 E4 € 17.00

1.6 10 094-012698-00000 E4 € 17.002.4 10 094-012699-00000 E4 € 17.003.2 10 094-001362-00000 E4 € 17.004 10 094-001363-00000 E4 € 17.00

4.8 10 094-001364-00000 E4 € 17.00

Attention! New prices as of 01.05.2011

99EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torch

Insulators

INS TIG 150/260 z Insulators made of heat-resistant Teflon z For TIG 150/260 torch types

Type Designation Size VPE Item no. P PricePc.. per pc.

INS 150/260 Insulators, TIG Standard 10 094-011979-00000 E4 € 2.00INS 150/260 XL Insulators, TIG XL 1 094-011760-00000 E4 € 19.00ADAPT 150/260 XL Adapter ring, TIG XL 1 094-011758-00000 E4 € 8.00

INS TIG 200/450 z Insulators made of heat-resistant Teflon z For TIG 200/450 torch types

Type Designation Size Item no. P Priceper pc.

INS TIG 200/450 Insulators, TIG Standard 094-011759-00000 E4 € 7.00XL 094-009657-00000 E4 € 20.00

INS TIG 9/20 z Insulators made of heat-resistant Teflon z For TIG 9 and 20 torch types

Type Designation Size VPE Item no. P PricePc.. per pc.

INS 9/20 Insulators, TIG Standard 10 094-001331-00000 E4 € 1.00INS TIT 9/20 XL 5 094-011916-00000 E4 € 7.00

Attention! New prices as of 01.05.2011

100 EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torch

INS TIG 17/18/26 z Temperature-resistant Teflon insulator z For TIG 17/18/26 torch types

Type Designation Size VPE Item no. P PricePc.. per pc.

INS 17/18/26 Insulators, TIGStandard 10 094-001307-00000 E4 € 1.00

XL 10 094-001194-00000 E4 € 2.00XXL 5 094-003138-00000 E4 € 5.00

INS TIG 18SC z Temperature-resistant Teflon insulator z For high-performance torch TIG 18SC

Type Designation VPE Item no. P PricePc.. per pc.

INS 18SC Insulators, TIG 5 094-001360-00000 E1 € 9.00

Attention! New prices as of 01.05.2011

101EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torch

Torch caps

TC TIG 150/260 z Torch caps for TIG welding torches in unbreakable, heat resistant plastic z For TIG 150/260 torch types

Type Designation Size Item no. P Priceper pc.

TC 150/260 Torch cap, TIGshort 094-011752-00000 E4 € 6.00

medium 094-011753-00000 E4 € 6.00long 094-011754-00000 E4 € 6.00

TC TIG 200/450/SC z Torch caps for TIG welding torches in unbreakable, heat resistant plastic z For TIG 200/450 torch types

Type Designation Size Item no. P Priceper pc.

TC 200/450 Torch cap, TIG short 094-010723-00000 E4 € 6.00long 094-010601-00000 E4 € 10.00

TC TIG 9/20 z Torch caps for TIG welding torches in unbreakable, heat resistant plastic z For TIG 9/20 torch types

Type Designation Size Item no. P Priceper pc.

TC 9/20 Torch cap, TIGshort 094-001328-00000 E4 € 2.00

medium 094-001329-00000 E4 € 2.00long 094-001327-00000 E4 € 3.30

Attention! New prices as of 01.05.2011

102 EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torch

TC TIG 17/18/26 z Torch caps for TIG welding torches in unbreakable, heat resistant plastic z For TIG 17/18/26 torch types

Type Designation Size Item no. P Priceper pc.

TC 17/18/26 Torch cap, TIG short 094-001120-00000 E4 € 4.00long 094-001114-00000 E4 € 5.00

Attention! New prices as of 01.05.2011

103EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torch

SpotArc replacement parts

GN Spotarc z Copper nozzles for spot welding and tacking of lap, corner and fillet welds z For EWM Spotarc torches

Type Designation Size Item no. P Priceper pc.

GN CO Spot welding nozzle, edge weld Edge weld 094-009602-00000 E1 € 15.50GN FI Spot welding nozzle, fillet weld Fillet weld 094-009603-00000 E1 € 14.00GN FL Spot welding nozzle, flat weld Flat weld 094-009604-00000 E1 € 12.00

SP spotArc z Ceramic insulator and spot nozzle holder z For EWM Spotarc torches

Size Standard

Type Designation Item no. P Priceper pc.

INS 18SP Insulators 094-009601-00000 E1 € 16.50NH 26/18SP Nozzle holder 094-009671-00000 E1 € 16.50

AG spotArc z For the exact positioning of the tungsten electrode z Manufactured from stainless steel z For EWM Spotarc torches

Type Designation Item no. P Priceper pc.

AG SPOTARC Setting gauge, EWM spotArc torch 094-014146-00000 E1 € 12.00

Attention! New prices as of 01.05.2011

104 EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torch

Tungsten electrodes

TEGREEN z Tungsten electrodes z Especially for aluminium z Optimum spherical cup formation, lower current load

Length mm 175Colour code Green

Type Designation Ø electrode VPE Item no. P Pricemm Pc.. per pc.

TEGREEN Tungsten electrode

1 10 094-001593-00000 E1 € 1.801.6 10 094-001008-00000 E1 € 2.102 10 094-001594-00000 E1 € 3.30

2.4 10 094-001009-00000 E1 € 4.203.2 10 094-001010-00000 E1 € 7.304 10 094-001011-00000 E1 € 12.30

4.8 10 094-001595-00000 E1 € 17.50

TERED z Tungsten electrodes z High ignition reliability and service life z Use is questionable due to weak radioactive radiation and lung penetration z Always use a welding machine with a grinding dust collector (e.g. TGM, Handy or Porta models) z Very limited applicability for alternating current

Length mm 175Colour code Red

Type Designation Ø electrode VPE Item no. P Pricemm Pc.. per pc.

TERED Tungsten electrode

1 10 094-001377-00000 E1 € 1.801.6 10 094-001000-00000 E1 € 2.102 10 094-001378-00000 E1 € 3.30

2.4 10 094-001001-00000 E1 € 4.203.2 10 094-001002-00000 E1 € 7.304 10 094-001003-00000 E1 € 12.40

4.8 10 094-001379-00000 E1 € 17.50

TEORANGE z Tungsten electrodes z High ignition reliability and service life z Use is questionable due to weak radioactive radiation and lung penetration z Always use a welding machine with a grinding dust collector (e.g. TGM, Handy or Porta models) z Preferably for use in automated applications z Not suitable for alternating current

Length mm 175Colour code Orange

Type Designation Ø electrode VPE Item no. P Pricemm Pc.. per pc.

TEORANGE Tungsten electrode

1 10 094-012947-00000 E1 € 3.601.6 10 094-012948-00000 E1 € 4.902 10 094-012949-00000 E1 € 7.60

2.4 10 094-012953-00000 E1 € 10.003.2 10 094-012954-00000 E1 € 16.704 10 094-012955-00000 E1 € 29.40

4.8 10 094-012956-00000 E1 € 41.20

Attention! New prices as of 01.05.2011

105EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torch

TEGREY z Tungsten electrodes z High ignition reliability and service life z Direct and alternating current

Length mm 175Colour code Grey

Type Designation Ø electrode VPE Item no. P Pricemm Pc.. per pc.

TEGREY Tungsten electrode

1 10 094-001380-00000 E1 € 1.801.6 10 094-001004-00000 E1 € 2.202 10 094-001381-00000 E1 € 3.40

2.4 10 094-001005-00000 E1 € 4.303.2 10 094-001006-00000 E1 € 7.404 10 094-001007-00000 E1 € 12.30

4.8 10 094-001382-00000 E1 € 17.50

TETURK z Tungsten electrodes z Wittstar WS2 with noble metal doping z High ignition reliability, long service life, reduced melting loss, high arc stability z Exceeds the properties of „red“ tungsten electrodes z Full-scale replacement z Not radioactive z Direct and alternating current

Length mm 175Colour code Turquoise

Type Designation Ø electrode VPE Item no. P Pricemm Pc.. per pc.

TETURK Tungsten electrode

1 10 094-012957-00000 E1 € 1.801.6 10 094-001591-00000 E1 € 2.402 10 094-002136-00000 E1 € 3.40

2.4 10 094-001592-00000 E1 € 4.603.2 10 094-001913-00000 E1 € 7.404 10 094-009312-00000 E1 € 12.30

4.8 10 094-001914-00000 E1 € 17.50

TEBLUE z Tungsten electrodes z Direct and alternating current z With lanthanum oxide doping z Primary application: automated and mechanised welding applications

Length mm 175Colour code Blue

Type Designation Ø electrode VPE Item no. P Pricemm Pc.. per pc.

TEBLUE Tungsten electrode

1 10 094-012958-00000 E1 € 2.201.6 10 094-001915-00000 E1 € 2.802 10 094-012960-00000 E1 € 4.10

2.4 10 094-001916-00000 E1 € 5.503.2 10 094-001917-00000 E1 € 9.004 10 094-012961-00000 E1 € 15.70

4.8 10 094-001918-00000 E1 € 24.20

Attention! New prices as of 01.05.2011

106 EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torch

TEGOLD z Tungsten electrodes z Direct and alternating current z With lanthanum oxide doping z Alternative to the WS2 electrode

Length mm 175Colour code Gold

Type Designation Ø electrode VPE Item no. P Pricemm Pc.. per pc.

TEGOLD Tungsten electrode

1 10 094-009446-00000 E1 € 2.001.6 10 094-009447-00000 E1 € 2.502 10 094-012962-00000 E1 € 3.80

2.4 10 094-009276-00000 E1 € 4.903.2 10 094-009527-00000 E1 € 8.204 10 094-009528-00000 E1 € 14.00

4.8 10 094-009529-00000 E1 € 20.80

Attention! New prices as of 01.05.2011

107EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchTungsten electrode grinding machines

Complete systems Porta & Handy

TGM 40230 Handy z Portable tungsten electrode grinder z For use at the welding site z Simple operation, high efficiency and quality z Diamond disk grinding surface can be used at three positions z 99.9% of grinding dust is captured

Performance W 850Decompact rpm 7000 - 32000Mains voltage V 230Mains frequency Hz 50 / 60Diamond disk diameter mm 40Weight kg 2.5Protection classification IP 21Standards CE Yes DIN 8575 292 DIN 8575 294

Type Designation Item no. P Priceper pc.

TGM 40230 Handy tungsten electrode grinder 098-003412-00500 H3 € 820.00

TGM 40230 Porta z Stationary tungsten electrode grinder z Simple operation, high efficiency and quality z Wet grinding for optimum grinding quality and long service life of the diamond disk z 100% of grinding dust is captured

Performance W 380Decompact rpm 8500Mains voltage V 230Mains frequency Hz 50 / 60Protection classification IP 21Standards CE Yes EN 61029

Type Designation Item no. P Priceper pc.

TGM 40230 Porta Tungsten electrode grinder, wet 098-003694-00000 H3 € 1,820.00

Attention! New prices as of 01.05.2011

108 EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchTungsten electrode grinding machines

Replacement parts Various replacement parts, accessories

DG TGM 40230 Handy z Diamond grinding disk coated on one side

Diamond disk diameter mm 40

Type Designation Item no. P Priceper pc.

DG Handy Diamond disc for EWM electrode grinder 098-003673-00000 H3 € 64.00

FC TGM 40230 Handy z Filter cartridge for tungsten grinding dust

Type Designation Item no. P Priceper pc.

FC TGM Filter insert 098-003679-00000 H3 € 21.00

DG TGM 40230 Porta z Extra strong diamond layer for maximum service life

Type Designation Item no. P Priceper pc.

DG Porta Diamond grinding disk for EWM electrode grinder 098-003695-00000 H3 € 341.00

GLCS Porta & Handy z Special grinding concentrate 1:20 for the production of grinding fluid

Contents ml 250

Type Designation Item no. P Priceper pc.

GLC5 Grinding concentrate, 250 ml for 5 l grinding liquid 098-003699-00000 H3 € 75.00

Attention! New prices as of 01.05.2011

109EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchTungsten electrode grinding machines

COL Porta & Handy z Collet chuck for securing the tungsten electrode in the electrode holder

Type Designation Ø electrode Item no. P Pricemm per pc.

COL TGM Collet chuck for EWM electrode grinder

0.8 098-003696-00000 H3 € 19.001 098-003697-00000 H3 € 18.00

1.2 098-003698-00000 H3 € 19.001.6 098-003674-00000 H3 € 18.002 098-003675-00000 H3 € 18.00

2.4 098-003676-00000 H3 € 18.003.2 098-003677-00000 H3 € 18.004 098-003678-00000 H3 € 18.00

Attention! New prices as of 01.05.2011

110 EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torch

Attention! New prices as of 01.05.2011

EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torch

Overview

Welding torch PagePlasma manual welding torch water cooled PHB / PWH 112Plasma replacement parts Replacement parts sets SPB 113

111

The EWM plasma welding torch generation provides you with the highest level of economic efficiency. Its extre-mely small structure makes accessibility easier for you, also with difficult component geometries. The extremely stable welding process leads to spatter free welding and high grade weld seams. This eliminates the need for lengthy further work. The plasma welding torches can be used in manual and automatic operation for high quality joints (welding and soldering) or for GMA surfacing. Optimum cooling guarantees a long service life of the wearing parts. A special gas lens makes very good gas shielding possible which allows for the processing of sensitive materials.

Attention! New prices as of 01.05.2011

112 EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchPlasma manual welding torch

water cooled PHB / PWH

PHB 50 z Low gas consumption with perfect shielding gas coverage thanks to optimal gas lens alignment z Water-cooled plasma welding torch z Compact torch design and small torch head diameter for optimal handling with the best possible

performance

Connection DecentralLength m 3

Type Designation Duty cycle DC- Item no. P PriceA per pc.

PHB 50

Plasma manual welding torch, 26 A

26 A / 60 % 26 094-002025-00000 E1 € 985.00

Plasma manual welding torch, 50 A

50 A / 60 % 50 094-002293-00000 E1 € 985.00

PWH 100 z Low gas consumption with perfect shielding gas coverage thanks to optimal gas lens alignment z Greater load capacity of the plasma nozzles thanks to optimised cooling system z Reduced operating costs, long service life of the plasma nozzles thanks to large, thread-free retainer

cone in the torch body and additional heat dissipation by means of the gas lens on the plasma nozzle

z Water-cooled plasma welding torch z Compact torch design and small torch head diameter for optimal handling with the best possible

performance

Duty cycle DC- 100 A / 100 %Duty cycle AC 80 A / 100 %Duty cycle DC+ 35 A / 100 %Connection DecentralLength m 3

Type Designation Item no. P Priceper pc.

PWH 100 Plasma manual welding torch 094-008232-00000 E1 € 1,886.00

PWH 150 z Low gas consumption with perfect shielding gas coverage thanks to optimal gas lens alignment z Greater load capacity of the plasma nozzles thanks to optimised cooling system z Reduced operating costs, long service life of the plasma nozzles thanks to large, thread-free retainer

cone in the torch body and additional heat dissipation by means of the gas lens on the plasma nozzle

z Water-cooled plasma welding torch z Compact torch design and small torch head diameter for optimal handling with the best possible

performance

Duty cycle DC- 150 A / 60 %Duty cycle AC 120 A / 60 %Duty cycle DC+ 50 A / 60 %Gas flow l/min 1.2Connection DecentralLength m 4

Type Designation Item no. P Priceper pc.

PWH 150 Plasma manual welding torch 094-008783-00000 E1 € 2,510.00

Attention! New prices as of 01.05.2011

113EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchPlasma replacement parts

Replacement parts sets SPB

SPB PHB/PMB 50A z Spare parts set, comprising: z 2 x gas nozzle z Welding insert, 3 x 1.0 mm/3 x 1.2 mm/3 x 1.4 mm/3 x 1.6 mm/3 x 1.8 mm z 2 x compensating spring z 4 x O-ring 5 x 1.5 mm z 1 x threaded intermediate piece z Collet chuck, 2 x 1.0 mm and 2 x 1.5 mm z 4 x O-ring 4 x 10 mm z 1 x torch cap z Special electrode, 2 x 1.0 x 62 mm and 2 x 1.5 x 62 mm z Guide insert, 2 x 1.0 mm and 2 x 1.5 mm z Insert tube, 2 x 1.0 mm and 2 x 1.5 mm z 1 x setting gauge z For torch type PHB 50

Type Designation Item no. P Priceper pc.

SPB PHB/PMB 50A Spare parts box PHB/PMB 50 094-002056-00000 E1 € 490.00

SPB PWH/PWM 100 z Spare parts set, comprising: z 2 x torch cap O-rings z 2 x retainer O-rings z 1 x collet chuck, 1.5 mm z 3 x seal for nozzle z Gas nozzle, short, 2 x 11 mm and 2 x 12 mm z Gas nozzle, long, 2 x 11 mm and 2 x 9.5 mm z 2 x insert tube 1.5 mm z 2 x gas lens, fine-pore z Plasma nozzle, 2 x 0.8 mm/2 x 1.0 mm/2 x 1.2 mm/2 x 1.4 mm/2 x 1.6 mm/2 x 1.8 mm z Plasma nozzle, long, 2 x 0.8 mm/2 x 1.0 mm/2 x 1.2 mm/2 x 1.4 mm/2 x 1.6 mm/2 x 1.8 mm z 4 x special tungsten electrode, 1.5 mm z 2 x electrode setting gauge z 1 x torch cap z 1 x plasma nozzle, plus pole, AC 1.2 mm z For PWH 100 torch types

Type Designation Item no. P Priceper pc.

SPB PWH/PWM 100 Spare parts box, PWH/PWM 100 094-008270-00000 E1 € 1,060.00

SPB PWH/PWM 150 z Spare parts set, comprising: z 1 x clamping module z 2 x O-ring z 2 x seal for nozzle z 2 x gas lens, large-pore z Gas nozzle, long, 1 x 11 mm and 1 x 9.5 mm z Gas nozzle, short, 1 x 11 mm and 1 x 12 mm z 2 x insert tube 1.5 mm z 1 x gas guide insert, 2.4 mm z Plasma nozzle, 2 x 1.2 mm/2 x 1.8 mm/2 x 2.4 mm/2 x 3.0 mm/2 x 3.2 mm/2 x 3.6 mm z Plasma nozzle, long, 2 x 1.2 mm/2 x 1.8 mm/2 x 2.4 mm/2 x 2.6 mm/2 x 3.0 mm/2 x 3.2 mm/2 x

3.6 mm z 2 x tungsten electrode, special z 2 x tungsten electrode z 1 x electrode setting gauge z 1 x nozzle key z 1 x torch cap z For PWH 150 torch types

Type Designation Item no. P Priceper pc.

SPB PWH/PWM 150 Spare parts box, PWH/PWM 150 094-009674-00000 E1 € 1,050.00

Attention! New prices as of 01.05.2011

114 EWM HIGHTEC WELDING GmbH www.ewm-group.com GES 2010Tel.: +49 2680 181-0, Fax.: -244 All prices excl. VAT and any price increase or alloy surcharges which may be incurred. 2010-05-15

Welding torchPlasma replacement parts

SPB PLASMA PLUSPOL AC z Spare parts set, comprising: z 3 x retainer O-rings z 1 x collet chuck z 3 x seal for nozzle z Gas nozzle, short, 2 x 11 mm and 2 x 12 mm z 2 x insert tube z 3 x gas lens, large-pore z Plasma nozzle, 2 x 1.2 mm/2 x 1.6 mm/2 x 2.0 mm/2 x 2.4 mm z 5 x tungsten electrode, special z 1 x electrode setting gauge z 1 x torch cap

Type Designation Item no. P Priceper pc.

SPB PP AC Spare parts box, plasma plus pole AC 094-008269-00000 E1 € 600.00

SPB EMPTY z Empty box as a spare

Type Designation Item no. P Priceper pc.

SPB EMPTY Spare parts box, empty 094-002054-00000 E1 € 13.50

Attention! New prices as of 01.05.2011