giraffa, nebulization at high altitude · industrial fogging system for dust suppression with...

2
146 idrotech by MADE IN ITALY Industrial fog system Fog maker Giraffa L.P. 10 bar-145 psi Giraffa, nebulization at high altitude Fog Maker is the new range of products launched onto the market by Idrotech to reduce dust. Giraffa uses an industrial (nebulising) atomizing system that shoots billions of small droplets into the air up to 25 metres with a rotation field of 340° through misting nozzles, Depending on the version, it can reach a maximum 5 m height. Giants, but "agile" The fog maker Giraffa is certainly the most “agile” product. It is excellent to nebulize water for dust control wherever the classic fog system would not be able to give outstanding results. There are 6 different models, for all requirements. The hydraulic version of Giraffa can reach 5 meters heigh, allowing even the finest dust to be swept away. Especially in mines, quarries, steel mills, construction sites, power plants, industrial centers, such particles would disperse in the air to the detriment of the community Detail of the pneumatic group of the hydraulic arm. Detail of the fan installed on the industrial fog cannon Giraffa Detail of the control panel of the industrial nebulizing system for dust suppression Giraffa Detail of the cannon mouth, highlighting the two atomizing nozzle-rings in action. Fog maker low pressure 10 bar 145 psi The advantages of "Made in Italy" Idrotech has twenty years experience in designing and producing fogging systems. The "Made in Italy" logo points out the use of high quality materials and the advanced know-how achieved by the company staff. This choice gives us the possibility to always find innovative solutions, suitable for our customers’ requirements and for the needs of an evolving market. Copyright ©2013 Idrobase Group. All rights reserved.

Upload: others

Post on 20-Jul-2020

6 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Giraffa, nebulization at high altitude · Industrial fogging system for dust suppression with nebulizing module, hydraulic column support, water ˜ lter and control panel mounted

146

perfe

ctco

ol

club

dei

ripa

rato

ri

idro

base

idro

tech

by

MADE IN ITALY

Industrial fog systemFog makerGiraffa L.P.10 bar-145 psi

Giraffa, nebulizationat high altitude

Fog Maker is the new range of products launched onto the market by Idrotech to reduce dust.Giraffa uses an industrial (nebulising) atomizing system that shoots billions of small droplets into the air up to 25 metreswith a rotation � eld of 340° through misting nozzles, Depending on the version, itcan reach a maximum 5 m height.

Giants, but "agile"The fog maker Giraffa is certainly the most “agile” product. It is excellent to nebulize water for dust control wherever the classic fog system would not be able to give outstanding results.There are 6 different models, for all requirements. The hydraulic version of Giraffa can reach 5 meters heigh, allowing even the � nest dust to be swept away. Especially in mines, quarries, steel mills, construction sites, power plants, industrial centers, such particles would disperse in the air to the detriment of the community

Detail of the pneumatic group of the hydraulic

arm.

Detail of the faninstalled on the

industrial fog cannon Giraffa

Detail of the control panel of the industrial nebulizing

system for dust suppression Giraffa

Detail of the cannon mouth, highlighting the

two atomizing nozzle-rings in action.

Fog makerlow pressure

10 bar145 psi

The advantages of "Made in Italy"Idrotech has twenty years experience in designing and producing fogging systems.The "Made in Italy" logo points out the use of high quality materials and the advanced know-how achieved by the company staff.This choice gives us the possibilityto always � nd innovative solutions, suitable for our customers’ requirements and for the needs of an evolving market.

Copy

right

©20

13 Id

roba

se G

roup

. All

right

s re

serv

ed.

Giraffa L.P.10 bar-145 psi

Giraffa, nebulizationat high altitude

Fog Maker is the new range of products launched onto the market by Idrotech to reduce dust.Giraffauses an industrial (nebulising) atomizing system that shoots billions of small droplets into the air up to 25 metreswith a rotation � eld of 340° through misting nozzles, Depending on the version, itcan reach a maximum 5 m height.can reach a maximum 5 m height.

Giants, but "agile"The fog maker Giraffa is certainly the most “agile” product. It is excellent to nebulize water for dust

Detail of the pneumatic group of the hydraulic

arm.

Detail of the faninstalled on the

industrial fog cannon Giraffa

Detail of the control panel of the industrial nebulizing

system for dust suppression Giraffa

in action.

Fog makerlow pressure

10 bar145 psi

The advantages of "Made in Italy"Idrotech has twenty years experience in designing and producing fogging systems.

Page 2: Giraffa, nebulization at high altitude · Industrial fogging system for dust suppression with nebulizing module, hydraulic column support, water ˜ lter and control panel mounted

146 147

perfe

ctco

ol

club

dei

ripa

rato

ri

idro

base

idro

tech

ZX.8503

ZX.8504

ZX.8506

ZX.8507

IT.9027 IT.9028OP

TION

AL

OPTI

ONAL

• Pressure, up to 10 bar-145 psi• No. of nozzles (2 rings with 32 nozzles), 64• Maximum cover area, 1.850 m2 about• Air capacity, 9.300 m3/h• Flow rate (with nozzle sizes 5, 10 and 15)

Pressure bar 3 4 5 10*Min � ow rate l/min 5,3 6,0 6,6 9,2Max � ow rate l/min 21,6 24,8 28,0 40,0*Pressure suggested: minimum 3 bar, ideal 10 bar

• Power absorbed , 3 Kw• Power supply, 400 V-50 Hz• Protection degree IP55• Rotation angle, 340°• Elevation, -20° +45°• Fan diameter, 410 mm-161.4”• 2800 Rpm.• Flow range 25 m about• Noise < v93 Lwa• ON / OFF switch

• Rotation right / left• Up / down• Pulse counter for rotation angle programming• Fan start• Start water supply (motor-pump / solenoid valves)• Duty cycle remote control• Operation light with buzzer• Nozzles ring heating• Night light

Technical data

Technical features

Code Model Description DimensionsW x L x H Weight

GIRAFFA BP FIXED VERSION 115

Industrial fogging system for dust suppression with nebulizing module, column support 115 cm, water � lter and control panel mounted on a concrete base.

80 x 100 x 24531.4"x 39.3" x 96.4"

kg.lbs.

210462.0

GIRAFFA BPFIXED VERSION 300

Industrial fogging system for dust suppression with nebulizing module, column support 300 cm, water � lter and control panel mounted on a concrete base.

80 x 100 x 51031.4"x 39.3" x 200.7"

kg.lbs.

280217.0

GIRAFFA BP MOBILE VERSION 115

Industrial fogging system for dust suppression GIRAFFA - MOBILE VERSION 300 with nebulizing module, column support 115 cm, water � lter and control panel mounted on a base with wheels.

192 x 210 x 27375.5"x 82.6" x 107.4"

kg.lbs.

400882.0

GIRAFFA FIXED BP HYDRAULIC VERSION

Industrial fogging system for dust suppression with nebulizing module, hydraulic column support, water � lter and control panel mounted on a concrete base.

120 x 210 x 190 47.2"x 82.6" x 74.8"

kg.lbs.

6001322.7

The advantages of "Made in Italy"

Low pressure

Construction and

mining sites, open-air dumps,

waste disposal, large industrial sites

are ideal applications for the "Giants"

of the nebulization

Auxiliary Pumps:The pump is necessary to reach the ideal working pressure, that is 10 bar-145 psi. Multistage, vertical electric pump 3 Kw – 400 V – 50 Hz – 70 l/m

Remote control 12 keys with relay transmitter and following fuctions:-ON/OFF- Oil pump control for hydraulic

column version- Rotation angle control (right/left)- Rotation control (ON/OFF)- Rotation angle memory control- Emergency stop control- Nozzles ring activation control

Copy

right

©20

13 Id

roba

se G

roup

. All

right

s re

serv

ed.

ZX.8506

ZX.8507

IT.9027 IT.9028OP

TION

AL

OPTI

ONAL

GIRAFFA BP MOBILE VERSION 115

Industrial fogging system for dust suppression GIRAFFA - MOBILE VERSION 300 with nebulizing module, column support 115 cm, water � lter and control panel mounted on a base with wheels.

192 x 210 x 27375.5"x 82.6" x 107.4"

kg.lbs.

400882.0

GIRAFFA FIXED BP HYDRAULIC VERSION

Industrial fogging system for dust suppression with nebulizing module, hydraulic column support, water � lter and control panel mounted on a concrete base.

120 x 210 x 190 47.2"x 82.6" x 74.8"

kg.lbs.

6001322.7

Construction and

mining sites, open-air dumps,

waste disposal, large industrial sites

are ideal applications for the "Giants"

of the nebulization

Auxiliary Pumps:The pump is necessary to reach the ideal working pressure, that is 10 bar-145 psi. Multistage, vertical electric pump 3 Kw – 400 V – 50 Hz – 70 l/m

Remote control 12 keys with Remote control 12 keys with relay transmitter and following relay transmitter and following fuctions:-ON/OFF- Oil pump control for hydraulic - Oil pump control for hydraulic

column version- Rotation angle control (right/left)- Rotation angle control (right/left)- Rotation angle control (right/left)- Rotation control (ON/OFF)- Rotation angle memory control- Emergency stop control- Nozzles ring activation control- Nozzles ring activation control

large industrial sites are ideal applications

for the "Giants" for the "Giants" of the nebulization

are ideal applications for the "Giants"

of the nebulization

large industrial sites are ideal applications

for the "Giants"

dumps, waste disposal,

- Emergency stop control- Nozzles ring activation control

- Rotation angle control (right/left)- Rotation control (ON/OFF)- Rotation angle memory control- Emergency stop control- Nozzles ring activation control

- Oil pump control for hydraulic - Oil pump control for hydraulic

- Rotation angle control (right/left)- Rotation angle control (right/left)

75.5"x 82.6" x 107.4"kg.lbs. 882.0

120 x 210 x 190 47.2"x 82.6" x 74.8"

kg.lbs.

6001322.7