gipro x-type gear indicator supplementary manual

2
GIPRO X-TYPE GEAR INDICATOR Supplementary Manual Yamaha FZ6 Fazer 2004-2008 (GPXT + GPX-Y01) www.healtech-electronics.com 1/2 Remove the main seat. Lift up or remove the fuel tank. Plug the GPX connectors in-line with the speed sensor connectors. (White, 3-pole triangular connectors in dust boot below the fuel tank)

Upload: others

Post on 10-Dec-2021

4 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: GIPRO X-TYPE GEAR INDICATOR Supplementary Manual

GIPRO X-TYPE GEAR INDICATORSupplementary Manual

Yamaha FZ6 Fazer 2004-2008 (GPXT + GPX-Y01)

w w w . h e a l t e c h - e l e c t r o n i c s . c o m 1/2

Remove the main seat.

Lift up or remove the fuel tank.

Plug the GPX connectors in-line with the speed sensor connectors.

(White, 3-pole triangular connectors in dust boot below the fuel tank)

Page 2: GIPRO X-TYPE GEAR INDICATOR Supplementary Manual

GIPRO X-TYPE GEAR INDICATORSupplementary Manual

Yamaha FZ6 Fazer 2004-2008 (GPXT + GPX-Y01)

w w w . h e a l t e c h - e l e c t r o n i c s . c o m 2/2

Connect the GPX Black/Green wire to the Gray wire of the crankshaft position sensor connector.

(Black, 2-pole connector at the right side below the fuel tank)

Connect the GPX Red wire to the Brown wire of the rear brakelight switch connector.

(Brown, 2-pole connector below the fuel tank)

Typical position for the gear indicator. Secure the unit properly.